How it Works
Toshiba
Loading...
XVSv16-240V-X
User Manual
102 pgs3.49 Mb0

Toshiba XVSv16-240V-X, XVSe16-480-X User Manual

m
odel no.
DVSe, XVSe, XVSv Digital Video Recorder
Software Manual
DVSe8-240-X
XVSe16-480-X
DVSe16-240-X DVSe16-480-X DVSe32-480-X
Please carefully read these instructions before using this product.
Save this manual for future use.
1
32339AC
Surveillix™ XVSv / XVSe / DVSe
Software Manual (Version 5.1)
Manual Edition 32339AC – NOVEMBER 2014
Printed in USA
No part of this documentation may be reproduced in any means, electronic or mechanical, for any purpose, except as expressed in the Software License Agreement. Toshiba shall not be liable for technical or editorial errors or omissions contained herein. The information in this document is subject to change without notice.
THE INFORMATION IN THIS PUBLICATION IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND. THE ENTIRE RISK ARISING OUT OF THE USE OF THIS INFORMATION REMAINS WITH RECIPIENT. IN NO EVENT SHALL TOSHIBA BE LIABLE FOR ANY DIRECT, CONSEQUENTIAL, INCIDENTAL, SPECIAL, PUNITIVE, OR OTHER DAMAGES WHATSOEVER (INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION OR LOSS OF BUSINESS INFORMATION), EVEN IF TOSHIBA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES AND WHETHER IN AN ACTION OR CONTRACT OR TORT, INCLUDING NEGLIGENCE.
This software and documentation are copyrighted. All other rights, including ownership of the software, are reserved to DVR Support Center. TOSHIBA, and Surveillix are registered trademarks of TOSHIBA CORPORATION in the United States and elsewhere; Windows, and Windows 2000 are registered trademarks of Microsoft Corporation. All other brand and product names are trademarks or registered trademarks of the respective owners.
The following words and symbols mark special messages throughout this guide:
WARNING: Text set off in this manner indicates that failure to follow directions could
result in bodily harm or loss of life.
CAUTION: Text set off in this manner indicates that failure to follow directions could
result in damage to equipment or loss of information
ii
Table of Contents
DVR BASICS ................................................................................................................................................ 8
Setting the Time and Date ........................................................................................................................................................... 9
Accessing the DVR Utility ............................................................................................................................................................ 9
Exporting Settings .................................................................................................................................................................. 9
Importing NVR Settings .......................................................................................................................................................... 9
Changing Video Format ......................................................................................................................................................... 9
Display Screen .......................................................................................................................................................................... 10
CPU Meter ........................................................................................................................................................................... 10
Live Camera Options ........................................................................................................................................................... 11
Camera View ............................................................................................................................................................................. 12
Recording Status Indicator ................................................................................................................................................... 12
Special Recording ................................................................................................................................................................ 12
Edit Live View Channels ............................................................................................................................................................ 13
Screen Division Buttons ............................................................................................................................................................ 13
64 Channel Screen Division ................................................................................................................................................. 14
Custom Live View Divisions ................................................................................................................................................. 15
SETUP OPTIONS........................................................................................................................................ 16
Setup Overview ......................................................................................................................................................................... 17
Setup Menu Overview ............................................................................................................................................................... 17
Network Camera Setup ............................................................................................................................................................. 18
Connecting a Network Device .............................................................................................................................................. 21
Connecting Manually ...................................................................................................................... 21
Connecting with Find Cameras ...................................................................................................... 22
Naming Camera Channels ............................................................................................................. 22
Assigning Dual Streams ....................................................................................................................................................... 22
Removing a Camera ............................................................................................................................................................ 23
Assigning Audio Channels to a Network Device .................................................................................................................. 23
Alarm Recording Mode ........................................................................................................................................................ 24
Camera Status and Information ........................................................................................................................................... 25
NVR Registration and Upgrade ............................................................................................................................................ 26
Locating the System ID .................................................................................................................. 26
Obtaining the License Key ............................................................................................................. 26
Unlocking the Upgrade................................................................................................................... 27
Unlocking Additional Network Devices ................................................................................................................................. 27
PTZ Camera Setup .................................................................................................................................................................... 28
Enabling an Analog PTZ Camera ........................................................................................................................................ 28
Enabling an IP PTZ Camera ................................................................................................................................................ 28
Using the Graphical PTZ Controller ....................................................................................... Error! Bookmark not defined.
Motion DETECTION Setup ........................................................................................................................................................ 28
Create a Motion Area ........................................................................................................................................................... 29
Enable Sabotage Detection ................................................................................................................................................. 30
Etc. ....................................................................................................................................................................................... 30
General Setup ........................................................................................................................................................................... 31
Audio .................................................................................................................................................................................... 31
32339AC 3
Configure Audio Channels ............................................................................................................. 31
System Volume .......................................................................................................................................................... 31
Voice Warning ................................................................................................................................ 31
Audio Channels .............................................................................................................................. 31
Display ................................................................................................................................................................................. 32
Display Options .............................................................................................................................. 32
General ................................................................................................................................................................................ 32
Sequencing .......................................................................................................................................................................... 33
Auto Sequence ............................................................................................................................... 33
Create Custom Auto Sequence ..................................................................................................... 33
Alarms / Sensor ......................................................................................................................................................................... 34
Alarms .................................................................................................................................................................................. 34
Sensors ................................................................................................................................................................................ 34
Configure Sensors ......................................................................................................................... 34
Activate PTZ Preset ....................................................................................................................... 34
Hybrid Sensor Setup ...................................................................................................................... 35
Relays .................................................................................................................................................................................. 35
Recording Schedule .................................................................................................................................................................. 36
Default Schedules ................................................................................................................................................................ 36
Day of the Week ................................................................................................................................................................... 37
Creating a Recording Schedule (Example) .......................................................................................................................... 37
Setting Daytime Motion Detection (Example) ................................................................................ 37
Setting Nighttime Continuous Recording ....................................................................................... 38
Setting Weekend Motion Recording .............................................................................................. 38
Creating a Sensor Schedule (Example) ............................................................................................................................... 39
Special Day Schedule .......................................................................................................................................................... 40
Creating/Editing a ‘Special Day’ Schedule..................................................................................... 40
Deleting a ‘Special Day’ Schedule ................................................................................................. 40
Alarm Options ...................................................................................................................................................................... 41
Setting a Restart Schedule .................................................................................................................................................. 42
Create System Restart Schedule ................................................................................................... 42
Network Setup ........................................................................................................................................................................... 43
User Management ..................................................................................................................................................................... 44
Add a New User ............................................................................................................................. 44
User Rank ...................................................................................................................................... 45
Changing the Administrator Password ................................................................................................................................. 45
Default Administrator Password ..................................................................................................... 45
Storage Management ................................................................................................................................................................ 46
Status Check / Email ............................................................................................................................................................ 46
General........................................................................................................................................... 46
Users .............................................................................................................................................. 46
Storage Check ............................................................................................................................... 47
Recording Data Check ................................................................................................................... 47
SMART Alert .................................................................................................................................. 48
Alarm Event .................................................................................................................................... 48
MySurveillix .................................................................................................................................... 49
SMART Information .............................................................................................................................................................. 49
Data Management ................................................................................................................................................................ 50
Delete Recorded Data.................................................................................................................... 50
File Management ........................................................................................................................... 50
4
Storage Management ..................................................................................................................... 50
System Information .............................................................................................................................................................. 51
Basic Information ........................................................................................................................... 51
Program Management ................................................................................................................... 52
Setting Up DDNS ....................................................................................................................................................... 52
Log Files ............................................................................................................................................................................... 53
Viewing Log Files ........................................................................................................................... 53
Exporting Log Files ........................................................................................................................ 53
Set Up Log Management Options .................................................................................................. 54
UPGRADE INFORMATION ....................................................................................................................................................... 55
Remote Software Upgrade ............................................................................................................ 55
Local Software Upgrade................................................................................................................. 55
Manual Software Upgrade ............................................................................................................. 55
SEARCH ..................................................................................................................................................... 57
Search Overview ....................................................................................................................................................................... 58
Play Controls ........................................................................................................................................................................ 58
Adjust the Brightness of an Image ....................................................................................................................................... 59
Zooming in on an Image ...................................................................................................................................................... 59
Zooming in on a Portion of an Image ................................................................................................................................... 59
Open Video from a Saved Location ..................................................................................................................................... 59
Sync ..................................................................................................................................................................................... 59
Clean Image ......................................................................................................................................................................... 59
Instant recording ........................................................................................................................................................................ 60
Activate Instant Recording ................................................................................................................................................... 60
Searching ‘Instant Recorded’ Video ..................................................................................................................................... 60
Performing a Basic Search ........................................................................................................................................................ 60
Printing an Image ...................................................................................................................................................................... 60
Daylight SAVIng Time ............................................................................................................................................................... 61
exporting image or video files .................................................................................................................................................... 62
Bookmarks ........................................................................................................................................................................... 63
Modify Bookmarks .......................................................................................................................... 63
Clip Backup .......................................................................................................................................................................... 64
Single Clip Backup Using Bookmark Data ..................................................................................... 64
Index Search ............................................................................................................................................................................. 65
Performing an Index Search ................................................................................................................................................ 65
Index Search Results Display .............................................................................................................................................. 65
Preview Search ......................................................................................................................................................................... 66
Performing a Preview Search .............................................................................................................................................. 67
Status Search ............................................................................................................................................................................ 67
Performing a Status Search ................................................................................................................................................. 67
Object Search ............................................................................................................................................................................ 68
Performing an Object Search ............................................................................................................................................... 68
Motion Search ........................................................................................................................................................................... 69
Performing a Motion Search ................................................................................................................................................ 69
Audio Playback .......................................................................................................................................................................... 69
Search in Live ............................................................................................................................................................................ 70
32339AC 5
BACKING UP VIDEO DATA ....................................................................................................................... 76
Backup Overview ....................................................................................................................................................................... 77
Nero® Express ...................................................................................................................................................................... 77
General Backup Overview ................................................................................................................................................... 78
Performing a General Backup ........................................................................................................ 78
Clip Backup Overview .......................................................................................................................................................... 79
Performing a Clip Backup .............................................................................................................. 79
Scheduled Screen Overview ................................................................................................................................................ 80
Activating Scheduled Backup ........................................................................................................ 80
Specifying Scheduled Backup Drives ............................................................................................ 80
Performing a Scheduled Backup ................................................................................................... 81
LAN / ISDN / PSTN CONNECTIONS .......................................................................................................... 82
LAN Overview ............................................................................................................................................................................ 83
Connecting to a LAN Using TCP/IP ........................................................................................................................................... 83
Configuring TCP/IP Settings ................................................................................................................................................ 83
LDAP INTEGRATION ................................................................................................................................. 84
Features .................................................................................................................................................................................... 85
Installing Active Directory .......................................................................................................................................................... 85
WEB VIEWER ............................................................................................................................................. 87
Web Viewer Overview ............................................................................................................................................................... 88
Configuring the Recorder for Remote Connection ............................................................................................................... 89
Connecting to a Recorder Using Web Viewer ...................................................................................................................... 89
Closing the Web Viewer ....................................................................................................................................................... 89
INCLUDED SOFTWARE SETUP ................................................................................................................ 90
The Surveillix App Overview ...................................................................................................................................................... 91
Emergency Agent Overview ...................................................................................................................................................... 91
Configuring the Recorder ..................................................................................................................................................... 91
Configuring the Client PC ..................................................................................................................................................... 92
Setup Window ...................................................................................................................................................................... 92
Emergency Agent Window ................................................................................................................................................... 93
Filter Event List .............................................................................................................................. 93
Add Items to Alarm Confirm List .................................................................................................... 93
Search Alarm Window .......................................................................................................................................................... 94
View Recorded Video ..................................................................................................................... 94
Export Video ................................................................................................................................... 94
Remote Software Overview ....................................................................................................................................................... 95
Remote Software Setup ....................................................................................................................................................... 96
Installing Remote Software ............................................................................................................ 96
Create a New Remote Connection ................................................................................................ 96
Configuring the Recorder ............................................................................................................... 97
Digital Verifier Overview ............................................................................................................................................................ 98
Installing the Digital Verifier .................................................................................................................................................. 98
Using the Digital Verifier ....................................................................................................................................................... 98
Backup Viewer Overview ........................................................................................................................................................... 99
6
Installing Backup Viewer ...................................................................................................................................................... 99
Loading Video from DVD or Hard Drive ............................................................................................................................... 99
ADDITIONAL SOFTWARE ....................................................................................................................... 100
SCS Overview ......................................................................................................................................................................... 101
Purchasing SCS Software Upgrade ................................................................................................................................... 101
Connecting to a Recorder .................................................................................................................................................. 101
32339AC 7
DVR BASICS
This chapter includes the following information:
Becoming familiar with the Display screen Defining Screen Divisions
8
SETTING THE TIME AND DATE
1. Exit to Windows by clicking Exit on the Display screen and then clicking Restart in Windows Mode.
2. Click OK.
3. Click the Start button > Control Panel.
4. Click Date and Time inside Control Panel, and then click Change Date and Time.
5. Adjust the Date and Time.
6. When finished, click OK, and then OK again.
7. Close all open windows and restart the recorder.
8. Click Start, and ten click Shutdown.
9. Select Restart.
ACCESSING THE DVR UTILITY
Exporting Settings
Exporting settings can help configure multiple recorders quickly or reconfigure a unit that has been reset to factory defaults. Some things must be kept in mind when using this feature.
You cannot use this function on:
Recorders that are different models. When upgrading from certain software versions. (This feature cannot be
used when upgrading from v2.x to v3.x)
1. Exit to Windows by clicking Exit on the Display screen then and select
Restart in Windows Mode.
2. Click the Start button > All Programs > Surveillix > vFormat.
3. Click Export in the System Setting tool section.
4. Select a location to save the settings file and click Save. The DVR
Utility will export the NVR settings and automatically close.
Importing DVR Settings
1. Exit to Windows by clicking Exit on the Display screen then and select Restart in Windows Mode. (See the Display screen
section later in this chapter)
2. Click the Start button > All Programs > Surveillix > vFormat.
3. Click Import in the System Setting Tool section.
4. Select the location of the settings file to import and click Open.
5. Click Yes to import the data file.
Changing Video Format
1. Exit to Windows by clicking Exit on the Display screen then and select Restart in Windows Mode. (See the Display screen
section later in this chapter)
2. Click the Start button > All Programs > Surveillix > vFormat.
3. Select the appropriate video setting from the list in the Video Setting section—NTSC or PAL.
4. Click Set.
32339AC 9
DISPLAY SCREEN
Opens:
Search PTZ Controller Setup Backup Login Exit
Current Date / Time
Sensor Status
Relay Outputs Screen Division buttons
Connected Users
User Details
CPU meter
Toggle between first and
second 16-screen divisons
Each time the recorder starts, the program defaults to the Display screen. The following diagram outlines the buttons and features used on the Display screen. You should become familiar with these options as this is the screen that will be displayed the majority of the time.
CPU Meter
Use the CPU meter to monitor the system resources on your recorder.
GREEN - System configuration OK YELLOW - Caution; evaluate system configuration and consider decreasing system
loading
RED - System configuration has been exceeded which may affect stability; decrease
system loading or upgrade system with CPU performance package
10
Live Camera Options
Right-click a camera on the Display screen to display these options:
Full Screen – Expand the camera window to the
full size of the screen.
Instant Recording – Begin Instant Recording for
the selected camera channel.
Search In Live – Rewind or fast-forward video from
that camera at the present date and time.
360 Setup – Configure settings for a 360 camera. Enable 360 Camera – Enable the use of a 360
camera.
e-PTZ – Use the digital PTZ function on a 360
camera
View type – Select the view for a 360 camera Mount Type – Select the type of mount that matches the location of your 360 camera. Projection type – Dewarp your 360 camera image in Spherical or Flat view (Panogenics cameras only) Panamorph SDK – Select to dewarp video footage from an Immervision 360 camera
Note 360 Setup, Enable 360 Camera, e-PTZ, View Type, Mount Type, Projection Type, all require a 360 camera to function. If you do
not have a 360 camera, ignore these functions.
32339AC 11
CAMERA VIEW
Recording
Displayed when the camera is currently being recorded to the recorder.
Motion Detection
Displayed when a camera (set up for motion detection) detects motion.
Display
Displayed when the camera is currently not being recorded to the recorder.
INSTAN
Recording Status
Camera Number and Name
Recording Status Indicator
The camera status for each camera is displayed in the upper right corner on the Video Display Area. The following are the different states for each camera:
Special Recording
There are two types of Special Recording. Text is displayed on the camera display area, indicating what type of Special Recording is activated.
SENSOR
Sensor is displayed when a sensor associated with the camera is activated.
INSTANT
Instant Recording is a manual activation of the recording for the selected camera. Regardless of the recording method, Instant Recording will start the camera recording and also flag the video for future searches using the Index Search feature. INSTANT is displayed when a user activates the instant recording option. Double right-click the video display to activate and deactivate the Instant Recording option.
12
1st Four Cameras View – Displays cameras 1-4 in the Video Display Area. To return to a different Multi-Camera View, select a different Screen Division option from the Screen Division menu.
2nd Four Cameras View – Displays cameras 5-8 in the Video Display Area. To return to a different Multi-Camera View, select a different Screen Division option from the Screen Division menu.
3rd Four Cameras View – Displays cameras 9-12 in the Video Display Area. To return to a different Multi-Camera View, select a different Screen Division option from the Screen Division menu.
4th Four Cameras View – Displays cameras 13-16 in the Video Display Area. To return to a different Multi-Camera View, select a different Screen Division option from the Screen Division menu.
1st Nine Cameras View – Displays cameras 1-9 in the Video Display Area. To return to a different Multi-Camera View, select a different Screen Division option from the Screen Division menu.
2nd Nine Cameras View – Displays cameras 10-18 in the Video Display Area. To return to a different Multi­Camera View, select a different Screen Division option from the Screen Division menu.
Full Screen – The Full Screen Option allows you to view the Video Display Area using the entire viewable area on the monitor. When this is selected, no menu options are visible. You can activate the Full Screen Option by clicking on the Full Screen button within the Screen Division menu. You can deactivate Full Screen mode by right clicking on the screen.
Auto Sequence – Sequences through the Screen Divisions sets. For example, selecting the 1A and then the Loop button will sequence through 1A, 2A, 3A, 4A and then repeat.
EDIT LIVE VIEW CHANNELS
By default, the recorder only allows live video from four network channels at one time on the local server. This protects the processor resources for recording data. The SCS software allows you to view live video from multiple recorders at once and with the same limitations that the recorder has on the number of live IP based video channels. If more than four channels of live video are required on the local server, you can enable the recorder to show up to 16 channels. Be aware that displaying 16 channels of live IP based video is resource intensive and may dramatically impact system performance.
To enable the recorder to view 16 channels of live video:
1. Click Exit on the Display screen, and then select Restart in Windows Mode.
2. Double-click the Edit Live View Channels icon on the desktop.
3. Click Yes, and then click OK.
4. The live view display will switch to 16 channel mode. To return the recorder to 4 channel mode, repeat steps 2 and 3.
5. Double-click Surveillix Server to restart the recorder software.
The live view display will switch to 16 channel mode. To return the recorder to 4 channel mode, run the utility again using the same instructions.
SCREEN DIVISION BUTTONS
Note When viewing live video from Network Cameras, only 4CH will display at one time. If more live view channels are required on the
local server, see the Edit Live View Channels instructions.
Note Local screen division options are limited to ensure optimal encoding performance.
32339AC 13
64 Channel Screen Division
Screen Division buttons
Toggle between first and
second 16-screen divisons
To access channels 17-32, 33-48, and 49-64 on a 64-channel recorder follow these instructions.
1. On the Live screen, click the additional screen division buttons (First Sixteen, Last Sixteen, etc.)
2. Select your desired screen division for those sixteen channels.
3. Double-click a camera channel to enlarge it to full screen.
14
Division Group
Channel List
Custom Live View Divisions
Customize your Live View screen by changing the order of the cameras. Each screen division can be individually customized but a camera can only be displayed once in each group view.
Create custom live view divisions:
1. On the Display screen, click Setup, and then click General Setup.
2. Click the Sequencing tab.
3. Drag and drop cameras from the Channel List to the desired location within the Division Group.
6. Select the screen intervals you want to display in each division area.
7. Set the Interval time (in seconds). This determines how long each sequence screen will appear on the Live display.
8. To save your settings, click Apply.
32339AC 15
SETUP OPTIONS
This chapter includes the following information:
Setup Overview Network Cameras Motion Detection PTZ Camera Setup Alarms Recording Schedule Network Setup Storage Management Instant Recording
16
Setup Options
SETUP OVERVIEW
The Setup options allow you to optimize your recorder by adjusting things like camera names, restart schedules, recording schedules and more. It is extremely important that you setup your recorder correctly for several reasons.
Recording Schedules – Increase the amount of pertinent recorded video that is saved on the recorder by optimizing the
recording schedule. Optimize the type of recording done by adding motion detection to this as well, again increasing the amount of useful video.
Camera Naming – Name each camera so the location can be easily identified and include any other pertinent information that
may be helpful when viewing it on the Video Display Area.
Configure Network Cameras – Connect to and configure cameras that are available on the network the recorder is
connected to.
SETUP MENU OVERVIEW
32339AC 17
ANALOG CAMERA SETUP
Adjust
Brightness Hue Contrast
Apply system defaults to all cameras
Selected camera display
Apply system defaults to selected camera
Apply current settings to all cameras
Connect selected camera to associated sensors
Define camera name
Select Channel
Select the camera channel to be edited.
Selected Camera Display
View the live camera feed from the selected camera channel.
Sensor Connection
Specify which sensors to associate with the camera selected.
Camera Name
Specify the name of the selected camera.
Set Up New Camera
18
1. Use a BNC cable to connect your camera to the rear of the recorder chassis.
2. On the Display screen, click Setup.
3. Click Camera Setup, and then click Analog Cameras.
4. Click the General Camera tab.
5. Select the channel that corresponds with the new camera from the Select Channel list.
6. Enter a name for the camera in the Camera Title field.
7. Adjust the Brightness, Hue and Contrast if necessary.
8. Select the appropriate Sensor Connection camera.
9. Click Apply to save your settings.
Resolution
CCTV
x480 model
x240 model
360x240
1CIF
480 PPS
240 PPS
720x240 *
2CIF
240 PPS
120 PPS
720x480 **
4CIF
120 PPS
60 PPS
Resolution
CCTV
x240V model
320x240
1CIF
240 PPS
640x240
2CIF
240 PPS
640x480
4CIF
120 PPS
Resolution
Channels
x240 model
x480 model
360x240
1 to 16
120 frames
240 frames
17 to 32
120 frames
240 frames
720x240
1 to 16
60 frames
120 frames
17 to 32
60 frames
120 frames
720x480
1 to 16
30 frames
60 frames
17 to 32
30 frames
60 frames
FRAME SETUP
The Frame Setup menu allows configuration of the Frames Per Second (FPS), resolution, quality, and sensitivity of camera channels. When configuring the FPS sliders, the blue slider represents the FPS the recorder will record during intensive recording and have available for transmitting to remotely-connected systems. The Red Slider represents the FPS that will be recorded by the recorder under normal recording conditions.
Note The total FPS of all blue sliders may not exceed the recording FPS of the recorder (based on model). The FPS of a red slider may
not exceed that of the blue slider for the same channel.
Note If MJPEG is selected as the recording codec, the dual sliders allow configuration of the recorder to record at a lower FPS while
still being able to view live video and transmit video at a higher FPS to remote connections. For example: If a camera channel is set to 25 FPS (blue) and 7 FPS (red), the recorder will record at 7 FPS and users viewing live video at the recorder or remotely can receive up to 25 FPS.
Maximum FPS Table
FPS Breakdown for Each Resolution
* Frames recorded in 720 x 240 are twice the size of the standard 360 x 240. When recording at 720 x 240, each frame assigned to the
channel will use two of the local frames available.
** Frames recorded in 720 x 480 are four times the size of the standard 360 x 240. When recording at 720 x 240, each frame assigned to
the channel will use four of the local frames available.
32-Channel Frame Allocation
32-channel models utilize two capture cards. When configuring cameras and allocating frames, the total frame rate for the recorder is split
between each capture card. Please reference the chart below for available frames for each grouping of channels.
32339AC 19
Frame Setup (XVSe & DVSe)
Reset to Default Settings
Sensitivity
Video Quality
Recording Resolution
Frame Select
Number of Recording Frames Selected
Compression Codec
Camera Channel
Note The red FPS record slider cannot exceed the blue FPS capture slider
Note The software will not allow the maximum available frames to be exceeded.
Note Using H.264 software compression significantly increases the processing load on the Surveillix DSVe and XVSe platforms. If
maximum analog PPS is desired in addition to IP video recording or multiple remote clients, Surveillix engineering recommends the addition of the upgraded system CPU (DVR-CPU UPG).
Frame Select
Blue Slider: Set the frame rate to be recorded during intensive recording and available for viewing on a remote client PC.
Red Slider: Set the frame rate recorded by during normal recording.
Resolution
Adjusting resolution will effect the total number of frames per second that are available.
Codec
Select the appropriate codec for each camera: MJPEG, MPEG-4, or H.264.
Video Quality
Lower quality video has a smaller file size but appears more pixilated.
Sensitivity
Set the Keyframe refresh rate. Adjusting this setting can result in poor video quality.
Note Do not change the default setting unless instructed by a system administrator.
20
NETWORK CAMERA SETUP
Connect IP cameras to your recorder using a network switch, which is connected to the network port on your recorder. By default, your recorder can display 4 IP camera channels in the Display screen. To change this setting, see the Edit Live View Channels section.
Note Your recorder is a hybrid recorder and, by default, does not require licensing. If you apply an NVR upgrade to your recorder, the
license tab will appear.
Connecting a Network Device
Connecting Manually
1. On the Display screen, click Setup.
2. Click Camera Setup, and then click IP Cameras.
3. Click Manually Add Camera.
4. Select the Vendor and Model of your network device from the Device Type list.
5. Type a Device Name.
6. Type the IP/URL address, Port#, User ID and Password of the device.
7. Click Add.
8. Double-click in the Channel field, and then select the Channel you want to assign to this camera.
9. Click Apply.
Note Audio is not supported when using ONVIF as the Driver/Type when connecting to IP cameras. If audio is needed, select the native
integration method to connect the camera.
32339AC 21
Connecting with Find Cameras
1. On the Display screen, click Setup.
2. Click Camera Setup, and then click IP Cameras.
3. Click Find Camera to automatically find all connected Network cameras.
4. Select the check box next to your desired camera.
5. Type the User ID and Password of the device.
6. Click Add Selected.
7. The camera will appear in the Camera Setup tab.
8. Double-click in the Channel field, and then select the Channel you want to assign this camera to.
9. Click Apply.
Naming Camera Channels
Surveillix recommends assigning a descriptive name to each camera channel for easy identification of where the camera is located. To name your IP camera channels, follow these instructions.
1. On the Display screen, click Setup.
2. Click Camera Setup, and then click IP Cameras.
3. Click the Camera Setup tab.
4. Double-click the Device Name column for the camera you want to name.
5. Type a name for your camera.
6. Click Apply to save the name.
Assigning Dual Streams
Dual stream support enables you to take advantage of two different streams from an IP camera. One stream can be high definition forensic video, while the other stream can be a lower resolution for live display. This allows SCS or Remote Viewer software to display more cameras while utilizing lower bandwidth and less CPU usage.
The second stream is used for motion detection in the server, which lightens the processing load for centrally-managed motion detection configurations
Dual streaming functions are limited to cameras that support this feature.
1. On the Display screen, click Setup.
2. Click Camera Setup, and then click IP Cameras.
3. Click the Camera Setup tab.
4. Choose which camera you want to configure, and double-click the Record Stream column.
5. Select which Stream you want to assign to be recorded.
6. Double-click the Transmit Stream column and choose the appropriate stream for remote viewing.
7. Click Apply to save your selections.
22
Removing a Camera
To remove a camera from your system, follow these instructions.
On the Display screen, click Setup.
4. Click Camera Setup, and then click IP Cameras.
5. Click the Camera Setup tab.
6. Right-click the camera you want to remove on the Network Cameras Currently in Use list, and then click Remove Device.
7. Click Yes to finish removing the camera.
8. Click Apply to save your settings.
Assigning Audio Channels to a Network Device
1. In the Display screen, click Setup.
2. Click IP Cameras.
3. Click the Camera Setup tab.
4. Click the Advanced Camera Setup tab.
5. Select the camera you want to record audio from in the Network Cameras Currently in Use field.
6. Select Record Network Audio.
7. To be able to hear audio from the recorder, select Enable Network Audio in Live View.
8. Click Apply to save your settings.
32339AC 23
Alarm Recording Mode
Set your camera to trigger Intensive Recording via Motion detection, Sensor Alarms, or user-instigated Instant Alarm.
1. On the Display screen, click Setup.
2. Click Motion Detection, and then click the Etc. tab.
3. Select your desired camera channel from the Select Channel list.
4. Select Enable Motion Detection on Continuous Recording.
5. On the Configuration menu tree, click IP Cameras.
6. Click the Camera Setup tab.
7. Click the Advanced Camera Setup tab.
8. Select the camera you want to record audio from in the Network Cameras Currently in Use field.
9. Select your desired Intensive Recording Mode (Accelerate on Motion Alarm, Accelerate on Sensor Alarm, or Accelerate
on User Input (Instant) Alarm).
10. Click Apply to save your settings.
Note When using H.264 codec, your recorder will capture iFrames at a normal recording rate, and increase to full frames for Intensive
Recording.
24
Camera Status and Information
The Camera Status and Information tab displays information on all cameras connected to the recorder.
1. In the Display screen, click Setup.
2. Click IP Cameras.
3. Click the Camera Status and Information tab.
32339AC 25
DVR Registration and Upgrade
Have the following information available before registering the DVR upgrade.
Product Serial Number: This may be the Product Serial Number displayed on the product sticker on the left side of the recorder; or the the unique Product Serial Number provided with the purchase of additional channel linceses.
System ID: The System ID is a number that is generated by the recorder. This is a unique code generated using the MAC address of the recorder.
Locating the System ID
1. On the Display screen, click Setup.
2. Click IP Cameras.
3. Click the License tab.
Obtaining the License Key
1. Open an Internet browser and go to: http://register.surveillixdvrsupport.com
2. Enter the Product Serial Number and System ID.
3. Click Submit.
4. Verify the information, and click Next.
5. The Unlock Code provided will need to be entered into the License Key field on the recorder.
Note Both the System ID and the Unlock Code are case sensitive.
Note We recommend printing the registration page with the Unlock Code for later reference.
26
Unlocking the Upgrade
1. Return to Setup > Network Cameras > License.
2. Enter the Unlock Code generated by the Registration Site into the License Key box.
3. Click Register and confirm that the new License Key is listed in the Channel Connection License box.
4. Click OK.
5. Click Apply.
6. Click Exit Setup.
Unlocking Additional Network Devices
Follow the instructions above for Registration and Upgrade to unlock any additional network devices.
32339AC 27
PTZ CAMERA SETUP
Note IPSe recorders support only select IP PTZ cameras.
Select PTZ cameras can be configured and controlled using the Surveillix recorder software. For instructions on configuring and installing your PTZ camera, refer to the camera manual.
Enabling an Analog PTZ Camera
1. Ensure that you have properly connected your IP PTZ camera to the network.
2. On the Display screen, click Setup.
3. Click IP Cameras, and then click Advanced Camera Setup.
4. Click Select Channel, and then click the analog channel you want to enable as a PTZ camera.
5. Select Enable Pan Tilt Connection.
6. Type the appropriate Protocol, Port, Baud Rate, Parity, Data Bits, and Stop Bits for your analog PTZ camera. These must
be the same settings that have been configured on the camera itself.
7. Set the appropriate General and Preset/Tours options
8. Click Apply to save your settings.
Enabling an IP PTZ Camera
9. Ensure that you have properly connected your IP PTZ camera to the network.
10. On the Display screen, click Setup.
11. Click IP Cameras, and then click the Advanced Camera Setup tab.
12. Select the IP camera form the Network Cameras Currently in Use list.
13. Select PTZ Camera.
14. Click Apply to save your settings.
28
Set up advanced
motion area
Set pre­alarm recording duration
Set post-alarm recording and sensor
duration
Reduce analog signal noise
from Motion Detection
MOTION DETECTION SETUP
The recorder allows the user to adjust several different Motion Settings and create motion detection areas.
Create a Motion Area
1. On the Display screen, click Setup.
2. Click Motion Detection.
3. Select a camera from the Select Channel list.
4. Select Detect Detail Motion Area.
5. Click Clear Motion Area.
6. Click Setup Advanced Motion Area.
7. Click a Motion Detection Area shape button.
8. Drag the mouse over the camera image.
Note To create a polygon shape, click the mouse at each point and double-click to close
the shape.
9. Click OK.
10. Move the sliders to adjust motion sensitivity and the noise filter.
11. Define the pre-alarm and post-alarm recording time for a motion event.
Pre Alarm Recording – 0 - 120 Seconds [The number of seconds the recorder records before motion is detected—to ensure any motion occurring between I-frames is captured, set to a value greater than 0]
Post Alarm Recording – 0 - 120 Seconds [The number of seconds the recorder records after it stops detecting motion]
32339AC 29
Loading...
+ 72 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use