Toshiba XD-E500KU, XD-E500KC User Manual

Introduction

480p 720p

24F 1080p 1080i

DIGITAL VIDEO

DVD PLAYER

XD-E500KU XD-E500KC

OWNER’S MANUAL

Connections

Basic playback

Advanced playback

Function setup

Others

Owner’s Record

The model number and serial number are on the back of your DVD Player. Record these numbers in the spaces below. Refer to these numbers whenev er you communicate with your Toshiba dealer about this DVD Play er.

Model number:

Serial number:

Introduction

SAFETY PRECAUTIONS

CAUTION:VISIBLE LASER RADIATION WHEN OPEN. DO NOT STARE INTO BEAM.

AVIS

WARNING:TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICINGTO QUALIFIED SERVICE PERSONNEL.

The lightning flash with an arrowhead symbol, within the equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in this owner’s manual.

The symbol for Class (Double lnsulation)

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN

CAUTION: TO PREVENT ELECTRIC SHOCK, MA TCH WIDE BLADE OF PLUG T O WIDE SLOT OF AC PO WER OUTLET ,

WARNING: The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquid, such as

CAUTION: This Digital Video Disc Player employs a Laser System.

FCC NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant

WARNING: Changes or modifications to this unit not expressly approved by Toshiba, or parties authorized by Toshiba,

Warnings: • The main plug is used as disconnect device and it should remain readily operable during intended used.

OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.

THEN FULL Y INSERT .

vases, shall be placed on the apparatus.

To ensure proper use of this product, please read this owner’s manual carefully and retain for future reference. Should the unit require maintenance, contact an authorized service location. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure. Visible and invisible laser radiation when open and interlocks defeated. DO NOT STARE INTO BEAM.

to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

could void the user authority to operate the equipment.

In order to disconnect the apparatus from the mains completely, the main plug should be disconnected from the mains socket outlet completely.

• Minimum 10 cm (4 inches) distances around the apparatus for sufficient ventilations.

• The ventilation should not be impeded by covering the ventilation openings with items such as newspaper, table-cloths, curtains, etc.

• No naked flame sources such as lighted candles should be placed on the apparatus.

• The use of apparatus in moderate climates.

CLASS 1

LASER PRODUCT

IMPORT ANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any of the ventilation openings. Install in accordance with the manufacturer's instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tr ipod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

ADDITIONAL SAFETY INSTRUCTIONS

15. Do not overload wall outlets; extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.

16. Never expose the apparatus to dripping or splashing or place items such as vases, aquariums, any other item filled with liquid, or candles on top of the unit.

17. Keep your fingers well clear of the disc tray as it is closing. Neglecting to do so may cause serious personal injury.

18. Do not place anything on top of this unit.

19. Do not place the apparatus on amplifiers or equipment that may produce heat.

20. Never block or cover the slots or openings in the unit. Never place the unit:

• on a bed, sofa, rug or similar surface;

• too close to drapes, curtains, or walls; or

• in a confined space such as a bookcase, built-in cabinet, or any other place with poor ventilation. The slots and openings are provided to protect the unit from overheating and to help maintain reliable operation.

21. Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious personal injury and apparatus malfunction.

22. If the apparatus should emit smoke or an unusual odor, immediately disconnect the power cord from the wall outlet. Wait until the smoke or smell stops, then ask your dealer for a check and repair. Neglecting to do so may cause fire.

23. During thunderstorms, do not touch the connecting cables or the apparatus.

24. Warning: To prevent spread of fire, keep candles or other open flames away from this product at all times.

Portable Cart Warning

Introduction

Location of the required label

The rating plate and the safety caution are on the rear of the unit.

Introduction

Precautions

Notes on handling

When shipping the DVD player, the original shipping carton and packing materials come in handy. For maximum protection, repack the unit as it was originally packed at the factory. Take care not to give it a shock or shake when carrying. Do not use volatile liquids, such as insect spray, near the DVD play er . Do not lea ve rubber or plastic products in contact with the DVD play er for a long time . They will leave marks on the finish. The top and rear panels of the DVD pla yer may become warm after a long period of use. This is not a malfunction. When the DVD player is not in use, be sure to remove the disc and turn off the power. If you do not use the DVD player for a long period, the unit may not function properly in the future. Turn on and use the DVD player occasionally.

Notes on locating

Place the DVD player on a level surface. Do not use it on a shaky or unstable surface such as a wobbling table or inclined stand. The loaded disc may come off the proper position and cause damage to the DVD player. When you place this DVD player near a TV, radio, or VCR, the playback picture may become poor and the sound may be distorted. In this case, place the DVD player away from the TV, radio, or VCR.

Notes on cleaning

Use a soft, dry cloth for cleaning.

For stubborn dirt, soak the cloth in a weak detergent solution, wring well and wipe. Use a dry cloth to wipe it dry. Do not use any type of solvent, such as thinners and benzene, as they may damage the surface of the DVD player. If you use a chemical saturated cloth to clean the unit, follow that product’s instructions.

Inspection and Maintenance

This DVD player is a high technology, precision device. If the optical pick-up lens and disc drive parts become dirty or worn down, the picture quality may be reduced. To avoid reduction in picture quality, it is recommended that regular inspection and maintenance (cleaning or parts replacement) be performed every 1,000 hours of use. For further details, contact your nearest consumer electronics dealer.

Notes on moisture condensation

Moisture condensation damages the DVD player. Please read the following carefully.

Moisture condensation occurs, for example, when you pour a cold drink into a glass on a warm day. Drops of water form on the outside of the glass. In the same w ay , moisture may condense on the optical pick-up lens inside this unit, one of the most crucial internal parts of the DVD player.

Moisture condensation occurs during the following cases.

When you bring the DVD player directly from a cold place to a warm place. When you use the DVD player in a room where you just turned on the heater, or a place where the cold wind from the air conditioner directly hits the unit. In summer, when you use the DVD player in a hot and humid place just after you move the unit from an air conditioned room. When you use the DVD player in a humid place.

Do not use the DVD play er when moisture condensation may occur.

If you use the DVD player in such a situation, it may damage discs and internal parts. Remove the disc, connect the power cord of the DVD player to the wall outlet, turn on the DVD player, and leave it for two or three hours. After two or three hours, the DVD player will have warmed up and evapor ated any moisture. Keep the DVD player connected to the wall outlet and moisture condensation will seldom occur.

Notes on Discs

On handling discs

Do not touch the playback side of the disc.

Playback side

Do not attach paper or tape to discs.

On cleaning discs

Fingerprints and dust on the disc cause picture and sound deterioration. Wipe the disc from the center outwards with a soft cloth. Always keep the disc clean.

If you cannot wipe off the dust with a soft cloth, wipe the disc lightly with a slightly moistened soft cloth and finish with a dry cloth. Do not use any type of solvent such as thinner, benzine , commercially available cleaners or antistatic spray for vinyl LPs. It may damage the disc.

On storing discs

Do not store discs in a place subject to direct sunlight or near heat sources. Do not store discs in places subject to moisture and dust such as a bathroom or near a humidifier. Store discs vertically in a case. Stacking or placing objects on discs outside of their case may cause warping.

Structure of disc contents

Normally, DVDs are divided into titles, and the titles are sub-divided into chapters. VIDEO CDs and audio CDs are divided into tracks.

DVD

Title 1 Title 2

Chapter 1 Chapter 2 Chapter 1 Chapter 2 Chapter 3

VIDEO CD/audio CD

Track 1 Track 2 Track 3 Track 4 Track 5

Each title, chapter or track is assigned a number, which is called “title number”, “chapter number” or “track number” respectively. There may be discs that do not have these numbers.

DVD

VIDEO CD/audio CD

Notes on copyright

The unauthorized recording, use, distribution, or revision of copyrighted materials including, without limitation, television programs, videotapes, and DVDs, is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability .

This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

Introduction

Notes on Discs (continued)

About this owner’s manual

This owner’s manual e xplains the basic instructions of this DVD player. Some DVDs are produced in a manner that allows specific or limited operation during playback. As such, the DVD player may not respond to all operating commands. This is not a defect in the DVD player. Refer to instruction notes of discs.

“

” may appear on the TV screen during operation.

” means that the operation is not permitted by the

A “ DVD player or the disc.

About

The icons on the heading bar show the playable discs for the function described under that heading.

: You can use this function with DVD discs.

DVD

: You can use this function with Video CDs. : You can use this function with Audio CDs/CD-R/RW

CDs.

Notes on region numbers

The region number of this DVD player is 1. If region numbers, which stand for their playable area, are printed

on your DVD and you do not find playback will not be allowed by the player. (In this case,

the DVD player will display a message on-screen).

or , disc

On VIDEO CDs

This DVD player supports VIDEO CDs equipped with the PBC (Version 2.0) function. (PBC is the abbreviation of Playback Control.) Y ou can enjoy two playback variations depending on types of discs.

• VIDEO CD not equipped with PBC function (Version 1.1) Sound and movie can be played on this DVD player in the same way as an audio CD.

• VIDEO CD equipped with PBC function (Version 2.0) In addition to operation of a VIDEO CD not equipped with the PBC function, you can enjoy playback of interactive software with search function by using the menu displayed on the TV screen (Menu Playback). Some of the functions described in this owner’s manual may not work with some discs.

Playable discs

This DVD player can play the following discs.

Maximum

Disc

Disc Mark

DVDs

VIDEO CDs

DIGITALVIDEO

Audio CDs

SUPER VIDEO CDs

SUPER VIDEO

DivX

The following discs are also available.

DVD±R/±R W and DVD-ROM discs of DVD format CD-R/CD-RW discs of CD-DA, Video CD, MP3, WMA or JPEG format Official DivX® Certified product Plays all versions of DivX® video (including DivX® 6) with standard playback of DivX

Some of these discs may be incompatible.

• You cannot play discs other than those listed abo v e .

• You cannot pla y DVD-RAM discs or non-standardized discs , etc., even if they may be labeled as above.

• This DVD player uses the NTSC color system, and cannot play DVDs recorded in any other color system (PAL, SECAM, etc.).

Because of problems and errors that can occur during the creation of DVD and CD software and/or the manufacture of DVD and CD discs, T oshiba cannot assure that this D VD pla yer will successfully play every disc bearing the D VD and CD logos. If you happen to experience any difficulty playing a DVD and/ or CD disc on this DVD play er, please contact T oshiba Customer Service.

is a trademark of DVD Format/Logo Licensing Corporation.

Contents

Audio

video (moving pictures)

Audio

video (moving pictures)

Audio

video (moving

pictures)

Audio

video (moving

pictures)

media files

Size

12 cm

8 cm

12 cm

8 cm

12 cm

8 cm (CD

single)

12 cm

8 cm

12 cm

8 cm

playback time

Approx. 4 hours

(single sided disc)

Approx. 8 hours

(double sided disc) Approx. 80 minutes

(single sided disc)

Approx. 160 minutes

(double sided disc)

Approx. 74 minutes

Approx. 20 minutes

Approx. 74 minutes

Approx. 20 minutes

35 min.

10 min.

It depends on DivX

quality

Table of Contents

Introduction

SAFETY PRECAUTIONS........................... 2

IMPORTANT SAFETY INSTRUCTIONS .... 3

Precautions ............................................... 4

Notes on Discs .......................................... 5

Notes on region numbers ................................... 6

Table of Contents...................................... 7

Identification of Controls ......................... 8

Front panel .......................................................... 8

Rear panel .......................................................... 8

DVD display ........................................................ 8

Remote control.................................................... 9

Loading batteries ............................................... 10

Operating with the remote control ...................... 10

Connections

Connecting to a T V .................................. 11

Connecting to a TV............................................. 11

Connecting to a TV (Using the component video

jacks)................................................................. 11

Connecting to a display (Using a HDMITM cable).........

Connecting to Optional Equipment ....... 13

Connecting to an amplifier equipped with a

Dolby

Digital decoder ......................................... 14

Connecting to an amplifier equipped with

Dolby Surround Pro Logic .............................. 14

Connecting to an amplifier equipped with a

DTS

decoder.................................................. 15

Connecting to an amplifier equipped with an MPEG2

audio decoder .................................................. 15

Connecting to an amplifier equipped with a

digital audio input ........................................... 15

Basic playback

Playing a Disc.......................................... 16

Basic playback ................................................ 16

Variable Speed Playbac k......................... 17

Playing in fast reverse or fast forward

directions ......................................................... 17

Playing frame by frame .................................... 17

Playing in slow-motion...................................... 17

Resuming playback from the same location ..... 17

Locating a Desired Section.................... 18

Locating a title using the top menu..................... 18

Locating a specific chapter or track.................. 18

Advanced playback

Accessing a Specific Location Directly ...........

Locating a specific title/chapter/time ................... 19

Repeating a Specific Segment................. 20

Repeating a specific segment ............................ 20

Playing in a Varied Order......................... 20

Playing titles, chapters or tracks in a varied

order .................................................................. 20

Playing in a Favorite Order ...................... 21

Setting titles, chapters or tracks in a favorite

order .................................................................. 21

Zooming a Picture..................................... 22

Zooming a picture ............................................. 22

Selecting the Sound Enhancement

(E.A.M.) ...................................................... 22

Selecting the sound enhancement ................... 22

Selecting the Picture Mode...................... 23

Selecting the picture mode ................................. 23

Selecting Subtitles ................................... 23

Selecting a subtitle language .............................. 23

Selecting the Camera Angle .................... 24

Changing the camera angle................................ 24

Selecting a Language ............................... 24

Selecting a playback audio setting ..................... 24

On-screen Display Operation .................. 25

On-screen display operation .............................. 25

Playing MP3/WMA Files ........................... 26

Playing MP3/WMA files ...................................... 26

Viewing JPEG Files .................................. 27

Viewing JPEG files ............................................ 27

Viewing a thumbnail view ................................... 27

Playing DivX®/MPEG-4 Files .................... 28

Playing DivX®/MPEG-4 files............................... 28

Function setup

Customizing the Function Settings ........ 29

Setting procedure ............................................... 29

Setting details..................................................... 29

Others

Tab le of Languages................................... 35

Before Calling Service Personnel ........... 36

Specifications ........................................... 37

Limited Warranty ...................................... 38

Introduction

Identification of Controls

See the page in for details.

Front panel

Rear panel

HDMI OUT

Power Cord

jack

OPTICAL OUT jack

14 15

S-VIDEO OUT jack

DVD display

The indicators vary depending on the kinds of discs you play.

No disc

Bad disc Bad disc

24F

1080p

480p 720p

1080i

HDMI indicator

PAUSE button

SKIP buttons

14 15

Chapter/T rack number Indicator

• During playback: Example

Some discs may only display chapter numbers.

• During playback: Example

Some discs may only display track numbers.

• During playback: Example

Some discs may only display track numbers.

Multifunctional indicator (indicates operating status or messages, etc.)

OPENAudio CDVIDEO CDDVD VIDEO

LOAD/CLOSE

Remote control

The instructions in this manual describe the functions on the remote control. See the page in for details.

Introduction

PIC MODE button

T / SEARCH button

18 17

HDMI button

* RETURN button

Return to menu display for VCD (2.0) discs with menu.

* MENU button

Use the MENU button to display the menu included on many DVDs. To operate a menu, follow the instructions in “Locating a title using the top menu.”

Introduction

24F 1080i 1080p

480p 720p

Identification of Controls (continued)

Loading batteries

Open the cover .

Insert batteries (R03/AAA size).

Make sure to match the + and – on the batteries to the marks inside the battery compartment.

Caution

• Never throw batteries into a fire.

Notes

• Be sure to use R03/AAA size batteries.

• Dispose of batteries in a designated disposal area.

• Attention should be drawn to the environmental aspects of battery disposal.

• Do not mix different battery types or combine used batteries with new ones.

• If the remote control does not operate correctly, or if the operating range becomes reduced, replace both batteries with new ones.

• If the batteries are dead or if you will not be using the remote control for a long time, remove the batteries to prevent battery acid from leaking into the battery compartment.

Operating with the remote control

Point the remote control at the remote sensor and press the buttons.

Distance: About 7 m (23 feet) from the front of the

remote sensor

Angle: About 30° in each direction of the front of

the remote sensor

* Do not expose the remote sensor of the D VD pla yer

to a strong light source such as direct sunlight or other illumination. If you do so, you may not be able to operate the DVD player via the remote control.

Notes on the remote control

• Direct the remote control at the remote sensor of the DVD player.

• When using the remote control, press the buttons at intervals of about 1 second to ensure the correct mode of operation.

• Do not drop or give the remote control a shock.

• Do not leave the remote control near an extremely hot or humid place.

• Do not spill water or put anything wet on the remote control.

• Do not open the remote control.

• If the remote control is not going to be used for a long time, remove the battery to avoid damage caused by battery leakage corrosion.

CAUTIONS:

• Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type.

• Batteries shall not be exposed to excessive heat such as

sunshine, fire or the like.

• Do not dispose of battery in fire; battery may explode or leak.

• When discarding batteries, environmental problems must be

considered and local rules or laws governing the disposal of these batteries must be strictly followed.

Connections

Connecting to a TV

Connect the DVD player to y our TV.

Connecting to a TV

Connections

Normal TV

S-Video cable (not supplied)

If the TV has a S-video input, connect the DVD pla yer with an S-video cable. When using an S-video cab le,

To video

do not connect the yellow video cable and component

input

video cables (Y/P

(yellow)

Notes

• Refer to the owner’s manual of the connected TV as well.

• When you connect the DVD player to your TV, be sure to turn off the power and unplug both units from the wall outlet before making any connections.

• If your television set has one audio input, connect the left and right audio outputs of the DVD player to a Y cable adapter (not supplied) and then connect to your TV .

• Connect the DVD player directly to your TV . If you connect the DVD player to a VCR, TV/VCR combination or video selector , the playback picture may be distorted as DVDs are copy protected.

• Analog audio out will not have sound if DTS playback is selected.

B/PR).

Audio/Video cable (supplied)

ToVIDEO

OUT

(yellow)

To 2ch AUDIO OUT (R: red, L: white)

• Make the following setting.

On-screen display

“Digital Output”

“Video Output”

Select:

“Off”,

“PCM” or

“Bitstream”

Component

S-VIDEO

P-Scan

HDMI

Page

Connecting to a TV (Using the component video jacks)

Interlaced outputs (ColorStream®)

Some TVs or monitors are equipped with component video inputs. Connecting to these inputs allows you to enjoy higher quality picture playback. Actual labels for component video inputs may vary depending on the TV manufacturer . (ex. Y , R-Y, B-Y or Y, C In some TVs or monitors, the color levels of the playback picture may be reduced slightly or the tint may change. In such a case, adjust the TV or monitor for optimum performance.

To Y video

input

To P

B video

input

To P R video

input

To audio input

B, CR)

Audio cable (not supplied)

Progressive outputs (ColorStream Pro®)

Some TVs or monitors are equipped with component video inputs that are capable of reproducing a progressively scanned video signal. Connecting to these inputs allows you to view the highest quality pictures with less flicker. Consumers should note that not all high definition television sets are fully compatible with this product and may cause artifacts to be displayed in the picture. In case of 480 progressive scan picture problems, it is recommended that the user switch the connection to the “standard definition” output. If there are questions regarding our TV set compatibility with this model 480p DVD play er, please contact our Customer Service Center.

To 2ch AUDIO OUT (R: red, L: white)

Component video cables (not supplied)

Connections

Switching the output signal (interlaced / progressive) using the remote control

Y ou can temporarily switch the output signal for better picture quality . Press PROGRESSIVE button repeatedly on the remote control to select Video Output to P-Scan mode during stop.

If your TV does not support the progressive scan format, the picture will appear scrambled or blank. To return to normal picture, press

PROGRESSIVE button repeatedly to turn off progressive mode.

Notes

• Refer to the owner’s manual of the connected equipment as well.

• When you connect the DVD player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections.

• If you place the DVD player near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the D VD player a way from the tuner and radio.

• The output sound of the DVD player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level. Otherwise, high volume sound may damage your hearing as well as the speakers.

• Turn off the amplifier before you connect or disconnect the D VD pla yer’ s power cord. If you leav e the amplifier power on, the speakers may be damaged.

• Analog audio out will not have sound if DTS playback is selected.

• ColorStream

and ColorStream Pro® are registered trademarks of T oshiba America Cousumer Products L.L.C.

• Make the following setting.

On-screen display

“Digital Output”

“Video Output”

* Only for TV equipped with component video

input jacks which support the progressive scan.

Select:

“PCM” or

“Bitstream” Component

*P-Scan

(Progressive)

Connecting to a display (Using a HDMITM cable)

To HDMI

Available output signals are below:

• Auto

• 480p (progressive)

• 720p (progressive)

• 1080i (interlaced)

• 1080p (progressive)

• 1080p/24F (progressive)

Switching the video quality (HDMI mode) using HDMI button on the remote control.

Press HDMI button on the remote control to receive a suitable video quality in STOP mode. The video quality is required to match your TV having HDMI f eature and suitable quality . Please also chec k your TV owner’s manual. Press this button to change the output signals as below. See the HDMI indicator and select the appropriate output signal.

HDMI indicator Video output signal

illuminates “ 1080p, 24F” 1080p/24F (progressive)

Press

illuminates “ 1080p”

Press

illuminates “1080i” 1080i (interlaced)

Press

illuminates “720p”

Press

illuminates “480p” 480p (progressive)

Press

illuminates “480p, 720p,

Press

480p, 720p, 1080i,1080p and 1080p/24F are signals created with this DVD Player from original 480i signal. The resolution of the picture may not be increased even if they are selected.

1080i, 1080p”

Output

1080p (progressive)

720p (progressive)

Auto

HDMI Cable

(notsupplied)

HDMI-compatible

display

• Make the following setting.

On-screen display

“Digital Output”

“Video Output”

About HDMI

HDMI (High Definition Multimedia Interface) supports both video and audio on a single digital connection for use with DVD pla yers, DTV, set-top bo xe s, and other A V devices. HDMI was developed to provide the technologies of High Bandwidth Digital Content Protection (HDCP) as well as Digital Visual Interface (DVI) in one specification. HDCP is used to protect digital content transmitted and received by DVI-compliant or HDMI-compliant displays.

HDMI has the capability to support standard, enhanced, or highdefinition video plus standard to multi-channel surround-sound audio. HDMI features included uncompressed digital video, a bandwidth of up to 2.2 gigabytes per second (with HDTV) signals, one connector (instead of several cables and connectors), and communication between the AV source and AV devices such as DTVs.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC.

Select: “PCM”

HDMI

Page

+ 28 hidden pages