Toshiba VL863-42, VL863-47 User Manual
VL86* Digital
Series
Contents
English
INSTALLING YOUR TV
Safety Precautions ............................................................................. 4
Installation and important information ..................................... 5
The remote control ........................................................................... 7
Inserting batteries and effective range ............................ 7
CONNECTING YOUR TV
Connecting external equipment .................................................. 8
Connecting an HDMI® or DVI device to the HDMI input .....9
To connect an HDMI device ................................................. 9
To connect a DVI device ........................................................ 9
HDMI’s ARC (Audio Return Channel) feature ................. 9
REGZA-LINK connection ................................................................10
Connecting a computer ................................................................11
To connect a PC to the RGB/PC terminal .......................11
To connect a PC to the HDMI terminal ...........................11
Connecting a home network ......................................................12
To connect the TV to a home network - Wired ...........12
To connect the TV to a home network with an internet
connection - Wireless .......................................................12
Controls and input connections .................................................13
Switching on ............................................................................13
Using the menu system .......................................................13
Using the TV controls and connections .........................13
MENU structure ................................................................................14
SETTING UP YOUR TV
Startup Application .........................................................................15
Quick Setup ..............................................................................15
Ant/Cable/Satellite (if available) .......................................16
Satellite Settings .....................................................................17
Auto Tuning .............................................................................19
ATV Manual Tuning .........................................................................20
Tuning ........................................................................................20
Skip ..............................................................................................21
Sorting positions ....................................................................21
DTV Manual Tuning ........................................................................22
Manual Tuning ........................................................................22
Manual Tuning for DVB-C ...................................................22
Manual Tuning for DVB-S ....................................................22
DTV Settings ......................................................................................23
Channels (Antenna/Cable) .................................................23
Channels (Satellite) ................................................................24
Standby Channel Update ....................................................24
DVB Character Set ..................................................................24
Dynamic Scan ..........................................................................24
Location setting ......................................................................25
Analogue switch-off ............................................................25
CONTROLS AND FEATURES
General controls ...............................................................................26
Quick Menu ..............................................................................26
Selecting channels ................................................................ 26
The Time Display – analogue only .................................26
Stereo and Bilingual transmissions .................................26
Using 3D functions .........................................................................27
Viewing 3D images ............................................................... 27
Switching display mode or selecting 3D format ........27
Setting the auto start mode .............................................. 29
Setting the 3D PIN code ......................................................29
Setting 3D Start Message .................................................... 29
Setting 3D Lock ......................................................................30
Setting 3D Timer Lock .......................................................... 30
Setting Enable 3D Timer .....................................................30
Displaying 3D Important Info ............................................ 30
Switching left and right images .......................................30
Adjusting your viewing position ...................................... 30
Sound controls .................................................................................31
Volume controls and sound mute ...................................31
Dual ............................................................................................. 31
Balance ......................................................................................31
Sound Navi ............................................................................... 31
Surround Settings .................................................................. 31
Dolby Volume® .......................................................................32
Dynamic Range Control ......................................................32
Audio Level Offset .................................................................32
Headphone Settings .............................................................32
Audio Description ................................................................. 32
Widescreen viewing ....................................................................... 33
Picture controls ................................................................................ 35
Picture Mode ...........................................................................35
Picture preferences ...............................................................35
Reset ...........................................................................................35
ColourMaster ...........................................................................35
Base Colour Adjustment .....................................................36
Colour Temperature .............................................................36
Auto Brightness Sensor Settings ......................................36
LED Backlight Control ..........................................................36
Black/White Level ..................................................................37
Static Gamma .......................................................................... 37
MPEG NR – Noise Reduction ..............................................37
DNR – Digital Noise Reduction .........................................37
Resolution+ .............................................................................. 37
Active Vision M400 ................................................................37
Motion Detection Range ..................................................... 37
Resetting the advanced picture settings ......................38
Expert Picture Settings ........................................................38
Control Visualization ............................................................ 40
Automatic Format (Widescreen) ......................................40
4:3 Stretch ................................................................................ 40
Blue Screen .............................................................................. 40
Picture Position ...................................................................... 40
Picture still ................................................................................ 41
HDMI Information Display ..................................................41
Using your home network ...........................................................42
2
Setting up the Network .................................................................43
Wireless Setup .........................................................................43
Advanced Network Setup ...................................................45
DNS Setup .................................................................................46
Network Connection Test ...................................................47
Using the software keyboard ......................................................47
Network Device Setup ...................................................................48
External Control Setup .........................................................48
Media Renderer Setup .........................................................48
Device Name Setup ...............................................................49
Using Toshiba Places ......................................................................49
Using YouTube™ ..............................................................................50
Using the Function Menu ...................................................50
Using Hybrid TV Standard (if available) ...................................52
Using the Media Player ..................................................................53
Basic operation .......................................................................53
Viewing photo files
(on a DLNA CERTIFIED™ Server or USB device) .......55
Viewing movie files
(on a DLNA CERTIFIED™ Server or USB device) .......56
Playing music files
(on a DLNA CERTIFIED™ Server or USB device) .......59
Using the Photo Frame feature ..................................................60
To open Photo Frame ...........................................................60
Setting the features ...............................................................61
Other features ................................................................................... 62
Panel Lock .................................................................................62
The timers ...........................................................................................63
Programme Timers – digital only ...................................63
On Timer ....................................................................................63
Sleep Timer ..............................................................................64
Energy Saving Settings ..................................................................64
Automatic Power Down ......................................................64
No Signal Power Down ........................................................64
Digital on-screen information and Programme Guide ......65
Information ..............................................................................65
Guide .......................................................................................... 66
Genre selection/searching ..................................................66
Digital settings – parental control ............................................67
Parental PIN Setup .................................................................67
Parental Setup .........................................................................67
Network Lock .......................................................................... 67
Digital settings – Channel Options ..........................................68
Selecting favourite channels .............................................68
Favourite Channel Lists .......................................................68
Skip channels ...........................................................................68
Locking channels ...................................................................68
Digital settings – other settings ................................................69
Subtitles .....................................................................................69
Audio languages ....................................................................69
Common Interface ................................................................69
Software Upgrade and Licences ................................................70
Auto Upgrade ..........................................................................70
Searching for New Software ..............................................70
Network Upgrade ..................................................................70
Software Licences ..................................................................70
System Information and Reset TV ............................................. 71
System Information ..............................................................71
Reset TV ..................................................................................... 71
PC Settings ......................................................................................... 71
Horizontal and Vertical Position .......................................71
Clock Phase .............................................................................. 71
Sampling Clock .......................................................................72
Reset ...........................................................................................72
Input selection and AV connections ........................................ 72
Input selection ........................................................................ 72
External input skip .................................................................73
Labeling video input sources ............................................73
PC Audio ...................................................................................74
Side Shared Audio ................................................................. 74
HDMI 3 Audio ..........................................................................74
HDMI Settings .........................................................................74
Digital Audio Output ............................................................74
Using Personal TV Mode ...............................................................75
Using REGZA-LINK ........................................................................... 76
Enable REGZA-LINK ............................................................... 76
TV Auto Power ........................................................................76
Auto Standby ..........................................................................77
Amplifier Control ................................................................... 77
Initial Speaker Setting ..........................................................77
Position Key Pass Through .................................................77
REGZA-LINK input source selection ................................77
REGZA-LINK Device Control ...............................................78
REGZA-LINK one touch play .............................................. 78
REGZA-LINK system standby .............................................78
REGZA-LINK system audio control .................................. 78
Toshiba PC compatible with REGZA-LINK ....................78
TEXT SERVICES
Text services ......................................................................................79
Selecting modes ....................................................................79
Text information ....................................................................79
Navigating pages using Auto ............................................79
Navigating pages using LIST .............................................79
Control buttons ......................................................................80
PROBLEM SOLVING
Questions and Answers ............................................................... 81
INFORMATION
License Information ........................................................................ 84
Information ........................................................................................ 86
Specifications and accessories ................................................... 91
English
3
INSTALLING YOUR TV
Safety Precautions
English
This equipment has been designed and
manufactured to meet international safety standards
but, like any electrical equipment, care must be taken
to obtain the best results and for safety to be assured.
Please read the points below for your own safety.
They are of a general nature, intended to help with all
electronic consumer products, and some points may
not apply to the goods you have just purchased.
Air Circulation
Leave more than 10cm clearance around the
television to allow adequate ventilation. This will
prevent overheating and possible damage to the
television. Dusty places should also be avoided.
Heat Damage
Damage may occur if the television is left in direct
sunlight or near a heater. Avoid places subject to
extremely high temperatures or humidity. Place in a
location where the temperature remains between 5°C
(41°F) min. and 35°C (94°F) max.
Mains Supply
The mains supply required for this equipment is 220240v AC 50/60Hz. Never connect to a DC supply or any
other power source. DO ensure that the television is not
standing on the mains lead. Use only the supplied lead.
DO NOT cut off the mains plug from this equipment,
this incorporates a special Radio Interference Filter, the
removal of which will impair its performance.
IF IN DOUBT, PLEASE CONSULT A COMPETENT
ELECTRICIAN.
Do
DO read the operating instructions before you
attempt to use the equipment.
DO ensure that all electrical connections (including
the mains plug, extension leads and interconnections between pieces of equipment) are
properly made and in accordance with the
manufacturers’ instructions. Switch off and withdraw
the mains plug before making or changing
connections.
DO
consult your dealer if you are ever in doubt about
the installation, operation or safety of your equipment.
WARNING: To prevent injury, this apparatus must be
securely attached to the floor/wall in accordance with
the installation instructions. See page 5.
DO be careful with glass panels or doors on
equipment.
DO NOT REMOVE ANY FIXED COVERS AS THIS WILL
EXPOSE DANGEROUS AND “LIVE” PARTS.
THE MAINS PLUG IS USED AS A DISCONNECTING DEVICE
AND THEREFORE SHOULD BE READILY OPERABLE.
Do not
DO NOT obstruct the ventilation openings of the
equipment with items such as newspapers,
tablecloths, curtains, etc. Overheating will cause
damage and shorten the life of the equipment.
DO NOT allow electrical equipment to be exposed to
dripping or splashing or objects filled with liquids,
such as vases, to be placed on the equipment.
DO NOT place hot objects or naked flame sources,
such as lighted candles or nightlights on, or close to
equipment. High temperatures can melt plastic and
lead to fires.
WARNING: To prevent the spread of
fire, keep candles or other open
flames away from this product at all
times.
DO NOT use makeshift stands and NEVER fix legs with
wood screws. To ensure complete safety, always fit
the manufacturer’s approved stand, bracket or legs
with the fixings provided according to the
instructions.
DO NOT leave equipment switched on when it is
unattended, unless it is specifically stated that it is
designed for unattended operation or has a standby
mode. Switch off by withdrawing the plug, and make
sure your family knows how to do this. Special
arrangements may need to be made for people with
disabilities.
DO NOT continue to operate the equipment if you
are in any doubt about it working normally, or it is
damaged in any way – switch off, withdraw the mains
plug and consult your dealer.
WARNING: Excessive sound pressure from earphones
or headphones can cause hearing loss.
ABOVE ALL - NEVER let anyone, especially
children, push or hit the screen and cabinet back,
or push anything into holes, slots or any other
openings in the case. These actions will damage
screen or internal parts.
NEVER connect the supplied COMPONENT
Adaptor cable or AV Adaptor cable to a wall outlet.
These cables are ONLY for insertion into the socket
provided for the purpose on the rear/side of the
TV.
NEVER guess or take chances with electrical
equipment of any kind - it is better to be safe than
sorry.
4
INSTALLING YOUR TV
Stand style is dependent on model
Installation and important information
Where to install
Locate the television away from direct sunlight and
strong lights. Soft, indirect lighting is recommended
for comfortable viewing. Use curtains or blinds to
prevent direct sunlight falling on the screen.
Place the TV on a stable, level surface that can
support the weight of the TV. In order to prevent
injury and maintain stability of this apparatus,
secure the TV to the level surface using the strap if
fitted, or to a wall using a sturdy tie to the P clips
provided. Otherwise secure the TV on the level
surface using the supplied mounting screw.
The LCD display panels are manufactured using an
extremely high level of precision technology;
however, sometimes some parts of the screen may be
missing picture elements or have luminous spots.
‘P’ Clip
This is not a sign of a malfunction.
Make sure the television is located in a position where
it cannot be p ushed or hit b y objects, as pressure wil l
break or damage the screen. Also, please be certain
that small items cannot be inserted into slots or
openings in the case.
Cleaning the screen and cabinet…
Turn off the power, and clean the screen and cabinet with a soft, dry cloth. We recommend that you do not use
any proprietary polishes or solvents on the screen or cabinet as this may cause damage.
Please take note
The digital reception function of this television is only effective in the countries listed in the “Country” section of
the “Setup/System Setup” menu. Depending on country/area, some of this television’s functions may not be
available. Reception of future additional or modified services can not be guaranteed with this television.
If stationary images generated by 4:3 broadcasts, text services, channel identification logos, computer displays,
video games, on-screen menus, etc. are left on the television screen for any length of time, they could become
conspicuous. It is always advisable to reduce both the brightness and contrast settings.
Very long, co ntinuous use of the 4:3 picture on a 16:9 screen may result in some re tention of th e image at the 4:3
outlines. This is not a defect of the LCD TV and is not covered under the manufacturer’s warranty. Regular use of
other size modes (e.g. Super Live) will prevent permanent retention.
Fixing strap
Fixing strap
Sturdy tie (as short as possible)
Stand clip
Screw
(supplied)
English
EXCLUSION CLAUSE
Toshiba shall under no circumstances be liable for loss and/or damage to the product caused by:
i) Fire;
ii) Earthquake;
iii) Accidental damage;
iv) Intentional misuse of the product;
v) Use of the product in improper conditions;
vi) Loss and/or damage caused to the product whilst in the possession of a third party;
vii) Any damage or loss caused as a result of the owner’s failure and/or neglect to follow the instructions set out in the owner’s manual;
viii) Any loss or damage caused directly as a result of misuse or malfunction of the product when used simultaneously with
associated equipment;
Furthermore, under no circumstances shall Toshiba be liable for any consequential loss and/or damage including but not
limited to the following: loss of profit, interruption of business, the loss of recorded data whether caused during normal
operation or misuse of the product.
5
INSTALLING YOUR TV
Centre of Display
Viewing Distance
Same height as
Centre of Display
Viewing Angle
English
When using the 3D glasses
About the 3D glasses
• Do not repair, modify, or disasse mble the 3D glasses by
yourself.
Doing so may cause you to become indisposed while
watching 3D images.
• Do not use the 3D glasses if they are crac ked, broken, or
not working properly.
Continuing to use them in such a state may cause injury, eye
strain, or indisposition.
• Do not stand or walk while wearing 3D glasses.
You may lose your balance which could result in falls or
other accidents.
• Do not wear the 3D g lasses for any purpose other than
viewing 3D programming.
Not for use as sunglasses.
• Do not drop, exert pressure on, or step on the 3D
glasses.
Doing so may damage the glass section, which may result in
injury.
Exposing the 3D glasses to liquid or excessive heat may
damage the function.
• If your nose or temple turns red, or you feel any pain or
discomfort, stop using the 3D glasses.
Such symptoms may occur when wearing 3D glasses for
long periods of time.
Cautions on watching 3D images
• Some viewers may experience a seizure or blackout
when exposed to certain flashing images or lights
contained in certain 3D television pictures or video
games.
Anyone who has had a seizure, loss of awareness, or other
symptom linked to an epileptic condition, or has a family
history of epilepsy, should contact a health care
professional before using the 3D function.
• Avoid using the 3D function when under the influence
of alcohol.
• If you are ill or feel ill, you should refrain from viewing
3D images, and consult your health care provider as
may be appropriate.
• If you experience any of the following symptoms when
viewing 3D video images, stop viewing and contact
your health care provider:
Convulsions, Eye or muscle twitching, Loss of awareness,
Altered vision, Involuntary movements, Disorientation, Eye
Strain, Nausea/Vomiting, Dizziness, Headaches.
• If you feel eye fatigue or other discomfort from viewing
3D video images, remove the 3D glasses and
discontinue use until the condition improves.
• Viewing in 3D may cause dizziness and/or
disorientation for some viewers.
Therefore, to avoid injury do not place your TV near open
stairwells, balconies, or wires.
Also do not sit near objects that could be broken if
accidentally hit.
• When viewing 3D images, always wear 3D glasses.
Watching 3D images without specified 3D glasses may
cause eye strain.
• Do not wear 3D glasses or watch 3D images from steep
angles or while lying down.
The 3D effect is lost in these conditions and eye strain may
result.
• It is recommended that the viewer’s eyes and 3D glasse s
are level with the screen.
• If you have prescription eye glasses or contact lenses,
wear the 3D glasses over them.
Watching 3D images without appropriate eyewear may
cause eye strain.
• If 3D images often appear doubled or if you cannot see
the images in 3D, stop viewing.
Continuous viewing may cause eye strain.
• Due to the possible impact on vision development,
viewers of 3D video images should be age 6 or above.
Children and teenagers may be more susceptible to health
issues associated with viewing in 3D and should be closely
supervised to avoid prolonged viewing without rest.
• For optimal 3D effect and to avoid eye fatigue it is
important that you properly select your viewing
position.
The best viewing position is at the indicated viewing
distance with your eyes at the same level as the centre of
the display as shown below. The centre of the optimum
viewing area varies from set to set. The usable viewing area
is generally over the range shown in the table below (actual
angle not depicted in drawing).
Viewing Angle Viewing Distance
42VL Approx. 26 deg. Over 1.6m
47VL Approx. 26 deg. Over 1.8m
IMPORTANT: If you see a double image, your eyes are either too
high or too low in relation to the horizontal centre of the screen.
Adjust your position so that it is closer to the centre to avoid eye
fatigue and to enjoy optimum 3D effects.
6
The remote control
16
20
30
29
23
19
17
15
13
11
7
5
4
2
1
18
24
27
26
28
25
14
12
9
10
8
6
3
21
22
Simple at-a-glance reference of your remote control.
1 For On/Standby mode
2 To select external input sources
3 To select TV Mode
4 To access Quick Menu
5 To access the “TOSHIBA PLACES” Top Page
When network is not connected, an error message will be
displayed.
6 To access the analogue or digital Channel List
7 To alter the TV volume
8 Switch the Audio Description On/Off
9 To mute the TV sound
10 To change programme positions
To change TEXT pages
11 On-screen Menus
12 To display the digital on-screen Programme Guide
13 When using menus, the arrows move the cursor on the
screen up, down, left or right
14 Press OK to confirm your selection
15 To return to previous Menu
16 To exit menus
INSTALLING YOUR TV
17 Colour buttons: Text and interactive service control
buttons
18 Number buttons
19 To display on-screen information
To access the index page in Text mode
20 To return to previous programme position
21 When in TV mode:
D Analogue time
display
When using Programme
Guide:
Z –24 hours
z +24 hours
CC –1 page
cc +1 page
22 To call up text services
23 To switch between 2D and 3D mode
24 Picture still
25 To access Media Player Menu
26 Selectable Picture preferences
27 Widescreen viewing
s Stereo/bilingual transmissions
28
29 To access More Information Menu
30 Digital Subtitles or Analogue TEXT Subtitle pages if
available
When in Text mode:
A To reveal concealed
text
B To hold a wanted
page
C To enlarge text
display size
D To select a page
while viewing a
normal picture
During Playback:
c
To PLAY
v To STOP
W/w To PAUSE/STEP
Z To SKIP-BACK
CC To REWIND
cc To FAST FORWARD
z To SKIP-FORWARD
Inserting batteries and effective range
Remove the back cover to
reveal the battery
compartment and make sure
the batteries are inserted the
proper way. Suitable battery
types for this remote are AAA,
IEC R03 1.5V.
Do not combine a used, old
battery with a new one or mix
battery types. Remove dead
prevent acid from leaking into the battery compartment.
Dispose of them in accordance with instructions on page 85
of this manual.
Warning: Batteries must not be exposed to excessive heat
such as sunshine, fire or the like.
The performance of the remote control will deteriorate
beyond a distance of five metres or outside an angle of 30
degrees from the centre of the television. If the operating
range becomes reduced, the batteries may need replacing.
batteries immediately to
7
English
CONNECTING YOUR TV
CableClamps(forStandtype)
CableClamps
(forWallMounttype)
RGB/PC INPUT
SCART INPUT
HEADPHONE jack
LAN port
HDMI 1/2/3/4 INPUTS
COMPONENT
VIDEO INPUT
(EXT 2)
*
VIDEO/AUDIO INPUT
(EXT 3)
DIGITAL AUDIO
OUTPUT (OPTICAL)
Satellite dish
Media Recorder
Aerial Cable
* When using the COMPONENT VIDEO INPUT (EXT 2), also connect Adaptor cable (RED and WHITE plugs) as Audio cables
to the VIDEO/AUDIO INPUT (EXT 3). EXT 3 Audio is shared.
“F-type”
Connecting external equipment
English
Before connecting any external equipment, turn off all main power switches. If there is no switch,
remove the mains plug from the wall socket.
Aerial cables: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connect the aerial to the socket on the rear of the television.
If you use a decoder and/or a media recorder, it is essential
that the aerial cable is connected through the decoder and/o r
through the media recorder to the television.
Satellite cable: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connect the LNB from the satellite dish to the SATELLITE
ANTENNA socket on the TV. You can receive TV, radio,
interactive TV, and HD TV with clear reception.
SCART leads: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connect the media recorder IN/OUT socket to the television.
Connect the decoder TV socket to the television.
Before running Auto Tuning, put your decoder and media
recorder to Standby.
The Digital Audio Output socket enables the connection of a
suitable surround sound system.
NOTE: This output is always active.
HDMI® (High-Definition Multimedia Interface) is for use with a
DVD decoder or electrical equipment with digital audio and
video output. For acceptable video or PC signal formats
through the HDMI terminals, see page 87.
NOTE: Although this television is able to connect to HDMI
equipment, it is possible that some equipment may not
operate correctly.
LAN port is used to connect the TV to your home network.
This TV can play digital content stored on a DLNA CERTIFIED™
product with server function.
A wide variety of external equipment can be connected to
the back of the television; therefore, the relevant owner’s
manuals for all additional equipment must be referred to
for exact instructions.
If the television automatically switches over to monitor
external equipment, return to normal television by pressing
the desired programme position button. To recall external
equipment, press
EXT 3, HDMI 1, HDMI 2, HDMI 3, HDMI 4, PC or ATV.
When the external input mode is s elected while viewing DTV
mode, the SCART socket does not output video/audio signals.
o to select between DTV, EXT 1, EXT 2,
8
CONNECTING YOUR TV
the back of your television
HDMI device
HDMI cable
Audio cable for HDMI to
television connection
(not supplied)
HDMI-to- DVI
adaptor Cable
DVI device
the back of your television
the back of your television
AV amplier that supports ARC
HDMI cable
English
Connecting an HDMI® or DVI device to the HDMI input
The HDMI input on your television receives digital
audio and uncompressed digital video from an
HDMI source device or uncompressed digital
video from a DVI (Digital Visual Interface) source
device.
This input is designed to accept HDCP (High-Bandwidth
Digital-Content Protection) programme material in digital
form from EIA/CEA-861-D–compliant consumer electronic
devices (such as a set-top box or DVD player with HDMI or DVI
output). For acceptable video signal formats, see page 87.
NOTE:
• Some early HDMI equipment may not work properly with
your latest HDMI TV, due to the adoption of a new standard.
Please unplug your HDMI cable first and then try setting the
INSTAPORT™ and Enable Content Type options to “Off”.
Your early HDMI source should operate properly with your
television. See page 74.
• Supported Audio format: Linear PCM, Dolby Digital (AC-3),
sampling rate 32/44.1/48kHz.
To connect an HDMI device
Connect an HDMI cable (type A connector) to the HDMI
terminal.
For proper operation, it is recommended that you use an
HDMI cable with the HDMI Logo ( ).
• If your HDMI connection is capable of 1080p and/or your
television is capable of refresh rates greater than 50Hz, you
will need a Category 2 cable. Conventional HDMI/DVI cable
may not work properly with this model.
• HDMI cable transfers both video and audio. Separate
analogue audio cables are not required (see illustration).
• See “HDMI 3 Audio” section on page 74.
To connect a DVI device
Connect an HDMI-to-DVI adaptor cable (HDMI type A
connector) to the HDMI 3 terminal and audio cables to the PC/
HDMI 3 (AUDIO) socket (see illustration).
• The recommended HDMI-to-DVI adaptor cable length is
6.6 ft (2m).
• An HDMI-to-DVI adaptor cable transfers video only.
Separate analogue audio cables are required.
• See “HDMI 3 Audio” section on page 74.
NOTE:
To ensure that the HDMI or DVI device is reset properly, it is
recommended that you follow these procedures:
• When turning on your electronic components, turn on the
television first, and then the HDMI or DVI device.
• When turning off your electronic components, turn off the
HDMI or DVI device first, and then the television.
To view the HDMI device video, press the
HDMI 1, HDMI 2, HDMI 3 or HDMI 4 mode.
o button to select
HDMI’s ARC (Audio Return Channel) feature
This feature enables the audio signal of the TV to be sent to
the AV amplifier via the HDMI cable. It will not be necessary to
connect a cable from the audio output of the TV to the audio
input of the AV amplifier to reproduce the audio received
from the tuner of the TV through the AV amplifier.
9
CONNECTING YOUR TV
the back of your television
Playback device
AV amplier
Playback device
REGZA-LINK connection
English
You can control the basic functions of connected audio/video devices using the television’s remote
control if you connect a REGZA-LINK compatible AV amplifier or playback device. For an explanation of
setup and operations, see pages 76–78.
For the setup shown above, you will need three HDMI cables.
NOTE:
• If several devices are connected, the REGZA-LINK feature
may not operate properly.
• For proper operation, it is recommended that you use HDMI
cables with the HDMI Logo ( ).
• This function is available when one PC and one AV amplifier
are connected separately. However, it may not operate
properly if the PC is connected via the AV amplifier.
Before controlling the device(s):
• After completing the above connections, set the REGZALINK Setup menu as you desire (see page 76).
• The connected devices must also be set. For details, see the
operation manual for each device.
• The REGZA-LINK feature uses CEC technology as regulated
by the HDMI standard.
• This feature is limited to models incorporating Toshiba’s
REGZA-LINK. However, Toshiba is not liable for those
operations. Refer to individual instruction manuals for
compatibility information.
10
Connecting a computer
Computer
the back of your television
Audio cable for PC
to television
connection (not
supplied)
HDMI-to- DVI
adaptor Cable
With either an RGB/PC or an HDMI connection, you
can watch your computer’s display on the
television and hear the sound from the television’s
speakers.
To connect a PC to the RGB/PC terminal
When connecting a PC to the RGB/PC terminal on the
television, use an analogue RGB (15-pin) computer cable and
a PC audio cable for the PC/HDMI 3 (AUDIO) socket. Select PC
from the PC/HDMI 3 Audio options in the AV Connection
menu located in the Preferences menu.
the back of your television
Mini D-sub
15 pin
connector
Audio cable for
PC to television
connection
(not supplied)
Computer
CONNECTING YOUR TV
• Some PC models may output unique signals that the
television may be unable to detect (see page 86).
• If connecting a certain PC model with a unique PC signal,
the PC signal may not be detected correctly.
To connect a PC to the HDMI terminal
When connecting a PC to the HDMI terminal on th e television,
use an HDMI-to-DVI adaptor cable and an analogue audio
cable.
If connecting a PC with an HDMI terminal, use an HDMI cable
(type A connector). A separate analogue cable is not
necessary.
English
RGB PC cable
(not supplied)
To use a PC, set the monitor output resolution on the PC
before connecting it to the television. For acceptable PC
signal formats, see page 86.
To display the optimum picture, use the PC setting feature
(see page 71).
NOTE:
• The PC audio input terminal on the television is shared with
the HDMI 3 analogue audio input terminal (see page 74).
• Some PC models cannot be connected to this television.
• An adaptor is not needed for computers with a compatible
mini D-sub15-pin terminal.
• Depending on the DVD’s title and the specifications of the
PC on which you are playing the DVD-Video, some scenes
may be skipped or you may not be able to pause during
multi-angle scenes.
• A ba nd m ay app ea r at the ed ges of t he scr een or p ar ts o f t he
picture may be obscured. This is due to scaling of the
picture by the set, it is not a malfunction.
• When PC input mode is selected, some of the television’s
features will be unavailable e.g. Colour System in the
Setup/System Setup menu.
Conversion adaptor
if required
(not supplied)
For acceptable PC and video signal formats, see page 87.
NOTE:
• The edges of the images may be hidden.
• If connecting a certain PC model with a unique PC signal,
the PC signal may not be detected correctly.
11
CONNECTING YOUR TV
Modem (if available)
Server PC
Router with Hub
the back of your television
Cable or Phone jack
[1] [2]
[2]
[3][2]
Access point (AP)
Wireless LAN router
Modem
Computer
TOSHIBA Dual
Band WLAN
adaptor
the back of your television
Connecting a home network
English
The LAN port allows your Toshiba TV to connect to
your home network. You can use this revolutionary
home entertainment networking system to access
photo, video and audio files that are stored on a
DL NA CER TIF IED ™ s erv er a nd pla y/d isp la y th em o n
your TV.
NOTE:
• If you connect to a shared network outside your home, it is
advisable to use a router. Always use DLNA CERTIFIED™
products in private network environments.
• If you use a hub or switch to connect the TV to your home
network, you may not be able to use the automatic setup
and will have to manually set up the network address. See
page 46.
• If you use a router with built-in DHCP functionality, use the
automatic setup. Manual setup may not work.
• If you connect the TV and PC directly, use a crossover LAN
cable.
To connect the TV to a home network -
Wired
To connect the TV to a home network
with an internet connection - Wireless
Please refer to “Wireless Setup” section on page 43.
How to use this Dual Band Wireless LAN Adaptor
• If this device is goi ng to be operated in the frequency range
of 5.15 GHz to 5.35 GHz, it is restricted to indoor use.
• If this device is going to be operated for 802.11 b/g/n
function in the frequency range of 2.454 GHz to 2.4835 GHz
in France, it is restricted to indoor use.
• A general authorization is required for using this device
outdoors or in public places in Italy.
• This device is NOT ALLOWED to be use d in the geographical
area wit hin a radius of 20km from the cen tre of Ny-Alesu nd
in Norway.
[1] Coaxial or telephone cable (depending on your modem type)
[2] Standard LAN cable
[3] Do NOT connect a phone jack directly to the TV’s LAN port.
12
CONNECTING YOUR TV
Controls and input connections
A wide variety of external equipment can be connected to the input sockets on the side of the television.
While all the necessary adjustments and controls for the television are made using the remote control, the
buttons on the television may be used for some functions.
USB 1 port
Media Player
COMMON INTERFACE
The Common Interface is for a Conditional Access
Module (CAM).
Contact a service provider.
The software updating of CI Plus CAM may be
automatically executed. At this time, your
Recording/Reminder programming will be canceled.
USB 2 port
Media Player/
WLAN adaptor ready for a home network
ORANGE LED – Programme timer set (digital only)
RED LED – Programme timer Active (digital only)
Ambient
Light Sensor
Control panel (touch sensor)
RED LED – Standby
BLUE LED – Power on
English
Switching on
If the RED LED is not lit, check that the mains plug is
connected to the power supply and press
control; it may take a few moments. The BLUE LED will be lit.
To put the television into Standby, press
control. To view the television, press
take a few seconds to appear.
For energy saving:
We recommend that you use the television with the factory
settings. The factory settings are for energy saving.
Unplugging the mains plug will cut energy use to zero for
all televisions. This is recommended when the television is
not being used for a long time, e.g. when on holiday.
Reducing the brightness of the screen will reduce energy use.
Energy efficiency cuts energy consumption and thus saves
money by reducing electricity bills.
NOTE: Putting the television into standby mode will reduce
energy consumption, but will still draw some power.
1 on the remote
1 on the remote
1 again. The picture may
Using the menu system
Press MENU on the remote control to display the menu.
The five initial topics icons will appear. As each symbol is
selected by pressing
BbC c to enter a sub menu and then enter a further sub
menu to see any options.
NOTE: The same menu is displayed in DTV (Digital TV) and
ATV (Analogue TV) modes; however, where some items are
not available in a mode, they will appear grayed out.
C or c on the remote control. Press
To use the option, press
move up and down and press
setting. Follow the on-screen instructions. The functions of
each menu are described in detail throughout the manual.
B and b on the remote control to
C or c to select your desired
Using the TV controls and connections
To alter the volume gently touch –
To alter the programme position touch
Touch MENU and
picture options.
Touch MENU to finish.
To select an external input, touch
input source is selected.
The Media Player feature provides access to photo, movie and
music files stored on a USB storage device that is connected
via the USB 1 or USB 2 port or on a network device.
NOTE: The USB socket has limited functionality and Toshiba
can take no responsibility for damage to other connected
equipment.
Th e USB 2 so cke t ha s to b e us ed w ith t he “ TOS HIB A Dua l Ba nd
WLAN Adaptor WLMnetwork.
This feature is available only when the “TOSHIBA Dual Band
WLAN Adaptor“ is used.
Please always refer to the owner’s manual of the equipment to be
connected for full details.
NOTE: Interactive video games that involve shooting a “gun”
at an on-screen target may not work with this TV.
b p B , – 2 + to control the sound and
10U2” in order to access a wireless
2 +.
b p B.
o until the appropriate
13
CONNECTING YOUR TV
TV Programmes
Media Player
Connected TV
Setup
Function
Genre Search
Guide
Programme
Timers
MENU structure
English
To ope n th e mai n me nu ( ill ust rati on b elo w) , pre ss MENU on the remote control or on the TV control panel.
1st Layer 2nd Layer 3rd Layer
Press MENU. Press
TV Programmes
C c / B. Press C c.Press OK. Press BbC c.
Media Player
Connected TV
Function
Setup
Guide
Genre Search
Programme Timers
Photo
Movie
Music
Media Player Setup
Toshiba Places
YouTube
Photo Frame
On Timer
Sleep Timer
Picture
Sound
Preferences
System Setup
Jump to Programme Guide (EPG)
Jump to Genre Search
Jump to Programme Timers
Device Select
Device Select
Device Select
Media Player Setup Menu
Jump to Toshiba Places
Jump to YouTube
Jump to Photo Frame
On Timer Menu
Sleep Timer Menu
Picture Menu
Sound Menu
Preferences Menu
System Setup Menu
14
SETTING UP YOUR TV
Quick Setup
Country
Germany
Primary Subtitle Language
German
English
English
English
Secondary Subtitle Language
Primary Audio Language
Secondary Audio Language
AutoView
No
AutoView mode automatically adjusts picture settings
to suit ambient light conditions.
Do you wish to enable AutoView mode?
Ant/Cable/Satellite
Satellite
Cable
Next
Antenna
Auto Tuning
Progress Found
ATV Tune Waiting...
Channel: C7
DTV Tune 3% 2
English
Startup Application
Before switching on the television, set your
decoder and media recorder, if applicable, to
Standby. To set up the television, use the buttons
on the remote control as detailed on page 7.
Quick Setup
a Press the 1 button. The Menu Language screen will
appear. This screen will appear the first time that the
television is switched on and each time Reset TV is
selected.
b Press B, b, C, or c to select the menu language and
press OK.
c Highlight Country and press C or c to select. The
television is now set to tune the stations for your
country.
NOTE:
• The following display menus will differ slightly
according to the country you selected.
• If there is not a country that you want to select in the
list, select Others.
d Press OK, and the Location screen will appear.
Location
To use the TV for displaying in a store showroom, please
select [Store]. [Home] mode is recommended for normal
use.
e Press C or c to select Home or Store. For normal
home use, select Home.
f Press OK, and the TV Mounting screen will appear,
press
C or c to select Stand or Wall.
TV Mounting
If you are mounting the TV on a wall please select [Wall].
[Stand] is recommended for other uses.
This setting may be modified later under Sound Navi in the
SOUND menu.
Home
Stand
g Press OK, and the AutoView screen will appear. Press
C or c to select Yes or No.
h Press OK. If the Ant/Cable/Satellite screen appears,
press
B or b to select Antenna, Cable or Satellite
and press OK to check ( ).
If DVB-C is not supported in your area, Cable will not
be displayed.
• When you select Antenna or Cable, follow steps 9
to 12.
• When you select Satellite, skip to step 13.
• When you select Antenna (or Cable) and Satellite,
the Satellite Settings startup screen will appear
automatically after completing the Antenna (or
Cable) scan and pressing OK.
i Select Next and press OK. The Auto Tuning start up
screen will appear with the option to select between
DTV and ATV, DTV or ATV if available. Use
select the appropriate mode.
j Press B or b to highlight Start Scan and press OK.
The television will start to search for available DTV
and/or ATV channels. The progress bar will indicate
the scan status.
You must allow the television to complete the
search.
When the search is complete, the television will
automatically select position one.
The Auto Tuning screen will display the total number
of services found.
NOTE: If there are multiple channels with the same
channel number, a confirmation window will appear.
C or c to select the one you prefer.
Press
15
C or c to
SETTING UP YOUR TV
SatelliteNo. Dish LNB
ASTRA 19.2˚E
Satellite Settings
1
4
3
2
11
Transponder : 1/83 (10743 MHz)
Dish Type : Fixed
Lower LOF (MHz) : 9600
Upper LOF (MHz) : 10600
Switch Type
None
LNB Power
On
Done
Positioning
Signal Level 30%
Go to Stored Position
Store Position
Transponder
1/83 (10743 MHz H)
Positioning
WE
Go to 0
Satellite : ASTRA 19.2°E
Step Size
1
PLEASE NOTE
Auto Tuning - Satellite
Start Scan
Satellite
Free to Air
ASTRA(19.2°E)
Scan Option
k Press C or c to view the DTV (digital channel) or ATV
English
(analogue channel) lists.
l Press B or b to move through the list to select a
channel and press OK to view.
In ATV mode, some areas may receive duplicate
stations. There may not be a clear picture or the signal
may be weak, so the station order can be changed
using ATV Manual Tuning.
REMEMBER: Press TV at any time to select between
ATV and DTV (DTV Ant TV/Radio/Text, DTV Cable TV/
Radio/Text, DTV Sat TV/Radio/Text if available)
modes.
NOTE: The time will be set automatically by
transmission but can be advanced or decreased by
using Local Time Setting in the DTV Settings screen.
m Select Next and press OK. The Satellite Settings
screen will appear. From this window, you can add the
satellites that you wish to tune and configure detailed
settings for each one individually. See “Satellite
Settings” on page 17.
B or b to highlight Store Position and press
Press
OK to store the dish position. Repeat steps 13 and 14
for the next satellite as necessary.
If your satellite dish is not movable, the Positioning
screen will not appear.
Adjust the dish position manually for the maximum
Signal Level strength.
Highlight Done and press OK.
o If the reception testing completes successfully, the
Auto Tuning startup screen will display.
You can select Scan Option from Free to Air and All.
p Press B or b to highlight Start Scan and press OK.
The television will start to search for available DVB-S
channels. The progress bar will indicate the scan
status.
When the search is complete, the Auto Tuning results
screen will display the total number of services found.
q Press B or b to move through the list to select a
channel and press OK to view.
Highlight Done and press OK.
n If your satellite dish is movable, the following
Positioning screen will appear.
B or b to highlight Positioning and press C or
Press
c to find the dish position with the strongest signal
level.
The Quick Setup menu can also be accessed at any
time from the Setup/System Setup menu.
Ant/Cable/Satellite (if available)
From this menu, you can set the RF input configuration.
a Press MENU / C c to highlight Setup icon.
b Press B / C c to highlight System Setup icon.
c Press OK to display System Setup menu.
d Press B or b to select Ant/Cable/Satellite and press
C or c to select Antenna, Cable or Satellite.
NOTE: When you attempt to change the Ant/Cable/
Satellite setting, a warning message will appear
followed by PIN entry (if PIN has been set) and a
prompt for Auto Tuning.
16
SETTING UP YOUR TV
Auto Tuning
DTV and ATVTuning Mode
DTV
Quick ScanScan Type
AutoStart Frequency
AutoEnd Frequency
AutoModulation
AutoSymbol Rate
AutoNetwork ID
Start Scan
English
e When Ant/Cable/Satellite is set to Cable, the
following setting options will be provided in the Auto
Tuning screen.
Press
B or b to select an item and press C or c to
select your desired option.
With the exception of DTV Scan Type and DTV Modulation
items, all of the following items will have 2 operating modes.
The first is Auto where the values for each item are preset by
the system. The second is an Input mode where you will be
able to enter a single value in place of the pre-set value. If no
channel is currently tuned and the Input state is chosen, a
system default value will be shown. However, if a channel is
currently tuned when the item is accessed, the value of the
current channel will be displayed.
DTV Scan Type:
This item determines whether a Quick Scan or a Full Scan will
be executed.
The Quick Scan is a simplified version of the Full Scan that is
designed to complete in less time.
DTV Start Frequency:
This sets the frequency from which the scan will begin.
DTV End Frequency:
This sets the frequency at which the scan will end.
DTV Modulation:
You can choose from five QAM modulation settings.
DTV Symbol Rate:
This is the baud rate (KS/s) of the scan.
DTV Network ID:
This is the Network ID to be utilized for the scan. This item is
grayed out when DTV Scan Type is set to “Full Scan”.
Satellite Settings
From the System Setup menu, you can add the satellites that you
wish to tune and configure detailed settings for each one
individually.
To add a satellite:
a Press MENU / C c to highlight Setup icon.
b Press B / C c to highlight System Setup icon.
c Press OK to display System Setup menu.
d Press B or b to select Satellite Settings and press
OK.
Satellite Settings
Switch Type
LNB Power
Transponder : 1/83 (10743 MHz)
Dish Type : Fixed
Lower LOF (MHz) : 9600
Upper LOF (MHz) : 10600
SatelliteNo. Dish LNB
ASTRA 19.2˚E
1
2
3
4
Done
None
On
11
e Press b to highlight a new line to add an another
satellite and press OK.
f Press b until the required satellite is displayed and
press OK.
To delete a satellite:
a In the Satellite Settings menu, press B or b to select
the satellite you want to delete.
b Press the RED button. A confirmation window will
appear.
c Press C or c to select Yes and press OK.
NOTE: It is not possible to delete position No.1.
17
SETTING UP YOUR TV
ASTRA 19.2˚E
111
Transponder Settings
1 10743 H
Frequency Polarisation Symbol Rate S/S2
7 10861
8 10876
2 10773
3 10788
4 10817
5 10832
6 10847
H
V
H
V
V
H
V
22000
22000
22000
22000
22000
22000
22000
22000
S
S
S
S
S
S
S
S
Transponder Settings
76 12640 V
Frequency Polarisation Symbol Rate S/S2
82 12728
83
77 12662
78 12669
79 12692
80 12699
81 12721
V
H
V
H
V
H
22000
22000
22000
22000
22000
22000
22000
S
S
S
S
S
S
S
83 0 H0S
83 12731 H 22000 S2
To edit the satellite settings:
English
a In the Satellite Settings menu, press B to highlight
Switch Type.
b Press C or c to select None, ToneBurst, DiSEqC
2way or DiSEqC 4way as your satellite switch type.
c Press b to highlight LNB Power and press C or c to
select On or Off.
To add a transponder:
a In the Satellite Settings menu, press B or b to
highlight the line you want to edit and press OK.
b Press the GREEN button. The Transponder Settings
screen will appear.
c Press B to highlight a new line.
To delete a transponder:
a In the Transponder Settings menu, press B or b to
highlight the line you want to delete.
b Press the RED button.
To edit the Transponder Settings:
a In the Transponder Settings menu, press B or b to
highlight the line you want to edit and press OK.
b Press C or c to select Frequency, Polarisation,
Symbol Rate or S/S2, and set the item using the
number buttons if necessary.
c Press OK to save your settings.
d Repeat steps 1 through 3 for other lines.
e Press the BLUE button to finish editing and return to
Satellite Settings.
Press the GREEN but ton to c ancel any edi ts tha t were
made.
Press the YELLOW button to reset all transponder
settings to their initial default settings.
To select the Dish Type:
a In the Satellite Settings menu, press B or b to select
the required satellite line and press OK.
b Press C or c to highlight Dish and press the GREEN
button.
d
Press OK.
e Edit each parameter as required and press OK.
Dish Settings
Dish : 1
Dish Type
c Press C or c to select Dish Type. You can select
Movable or Fixed as the Dish Type.
18
Fixed
To select the LNB Settings:
LNB Settings
Lower LOF
9750
LNB : 1
Upper LOF
10600
System Setup
Menu Language
English
Country
Ant/Cable/Satellite
Auto Tuning
ATV Manual Tuning
DTV Settings
DTV Manual Tuning
Satellite Settings
Germany
Auto Tuning
Previous settings will be lost! Press EXIT for no
change.
AllSatellite
Free to AirSearch Option
Start Scan
a In the Satellite Settings menu, press B or b to select
the required satellite line and press OK.
b Press C or c to highlight LNB and press the GREEN
button.
c Press B or b to select Lower LOF or Upper LOF and
input the appropriate frequencies.
Auto Tuning
NOTE: As new services are broadcast, it will be necessary to
re-tune the television in order to view them.
Auto Tuning will completely re-tune the television and can be
used to update the channel list. It is recommended that Auto
Tuning is run periodically to ensure that all new services are
added. All current channels and settings, i.e. locked channels,
will be lost.
a Press MENU / C c to highlight Setup icon.
b Press B / C c to highlight System Setup icon.
c Press OK to display System Setup menu.
SETTING UP YOUR TV
e For DTV/ATV Tuning:
A screen will appear warning that previous
programmes and settings will be deleted.
Auto Tuning
Previous settings will be lost!
Press EXIT for no change.
DTV and ATVTuning Mode
Start Scan
Press
C or c to select DTV and ATV, DTV or ATV, if
available, then highlight Start Scan and press OK to
continue with the Auto Tuning.
NOTE: If you have selected “Others” for the Country
field in the System Setup menu, and selected a
tuning mode other than “DTV” , choose the optimum
ATV broadcasting system (B/G, I, D/K or L).
The television will start to search for all available DTV
and/or ATV services.
You must allow the television to complete the
search.
When the search is complete, the Auto Tuning screen
will display the services found.
For Satellite Tuning:
A screen will appear warning that previous programmes
and settings will be deleted.
English
d Press B or b to select Auto Tuning and press OK.
Press B or b to highlight Satellite and press C or c to
select the desired satellite (No.1 Sat ~ No.4 Sat or
All).
You can select Free to Air or All as the Search Option.
Highlight Start Scan and press OK to continue with
the Auto Tuning.
When the search is complete, the Auto Tuning screen
will display the services found.
f Press B or b to move through the list to select a
channel and press OK to view.
19
SETTING UP YOUR TV
ATV Manual Tuning
System
1 A C 2 0 V C R
I
123 4 65 7 8 9
Pos. Channel Station
ATV Manual Tuning
1
2
3
4
6
7
8
C2
C7
S10
S40
C22
5
C25
C28
C30
ATV Manual Tuning
System
1 A C 2 0
I
ATV Manual Tuning
Search
1 C 2 0 IA
ATV Manual Tuning
English
Tuning
The television can be tuned-in manually using ATV Manual
Tuning. For example, you might use the feature if the television
cannot be connected to a media recorder/decoder with a SCART
lead or when you want to tune-in a station on another System.
C and c to move across the screen and select any of the
Use
ATV Manual Tuning options. Then use
settings.
1 Position
The number to be pressed on the remote control to tune
the channel.
2 System
Specific to certain areas.
3 Colour System
Factory set to Auto, should only be changed if problems
are experienced, i.e. NTSC input from external source.
4 Skip
Set Skip to On (
8) or Off (() for the selected channel.
See page 21.
5 Signal Class
The channel classification.
6 Channel
The channel number on which a station is being
broadcast.
7 Search
Search up and down for a signal.
8 Manual Fine Tuning
Only used if interference/weak signal is experienced. See
page 81.
9 Station
Station identification. Use the
enter up to seven characters.
To allocate a position on the television for a decoder and
media recorder: turn the decoder on, insert a pre-recorded
film in the media recorder, press PLAY and manually tune.
B or b to adjust the
B b and C c buttons to
a In the System Setup menu, press b to select ATV
Manual Tuning and press OK.
System Setup
Menu Language
Country
Ant/Cable/Satellite
Satellite Settings
Auto Tuning
ATV Manual Tuning
DTV Manual Tuning
DTV Settings
English
Germany
b Use B or b to select the desired position. We suggest
Pos. 0 for a media recorder.
Different Channel numbers may be displayed.
c Press OK to select. If the channel chosen for the media
recorder is set to skip, Skip should be removed before
storing.
d Press c to select System and press B or b to change
if required.
e Then press c to select Search.
f Press B or b to begin the search. The search symbol
will flash.
20
SETTING UP YOUR TV
PLEASE NOTE
ATV Manual Tuning
Station
1 A C 2 0 V C R I
Pos. Channel Station
ATV Manual Tuning
1
2
3
4
6
7
8
C2
C7
S10
S40 ABC1
ABC1C22
5
C25
C28
C30
ATV Manual Tuning
Skip: On
1 A C 2 0 I
English
g Each signal will show on the television. If it is not your
media recorder, press
search.
B or b again to restart the
h When your media rec order si gnal is fo und, pres s c to
move along to Station. Use
the required characters, e.g. VCR.
B, b, C and c to put in
i Press OK to save.
j Repeat for each position you want to tune, or press
BACK to return to the list of channels and select the
next number to tune.
k Press EXIT when you have finished.
This television has direct channel entry if the
channel numbers are known.
Select the ATV Manual Tuning screen in Step 3.
Enter the Position number, the System, then C for
standard (terrestrial) channels or S for cable
channels and the Channel number. Press OK to
save.
Skip
To prevent certain channels from being viewed, positions can be
skipped.
a Select ATV Manual Tuning from the System Setup
menu.
b Use B or b to highlight the position to be skipped
and press OK to select.
d Use B or b to turn Skip on.
Press OK.
8 on the screen indicates a skipped position.
e Press BACK and repeat from Step 2 or press EXIT.
Each position has to be individually selected. To turn
Skip off, repeat the procedure for each position.
Skipped positions cannot be selected by P
or by the controls on the television but can still be
accessed by the number buttons on the remote
control.
U and Pu
Sorting positions
Channels may be moved and saved to the position of your
choice.
a Select ATV Manual Tuning from the System Setup
menu.
b With the list of channels showing, use B or b to
highlight the channel you want to move and press
ATV Manual Tuning
Pos. Channel Station
2
S10
3
C7
4
C40
5
C22
1
C2
6
C25
7
C28
8
C30
ABC1
ABC1
c Use B or b to move through the list to your preferred
position. As you do so, the other channels will move
to make room.
c.
c Press c to select Skip.
d Press C to save your move.
Repeat as necessary and press EXIT.
21
SETTING UP YOUR TV
DTV Manual Tuning
WEAK
Signal Strength
Quality
Channel
GOOD
Start Scan
STRONGAVERAGE
13
Pos.New TypeName
ABC ONE
0 New Channels - Total 6
ABC TWO
ABC THREE
ABC NEWS 24
DTV Manual Tuning
2
1
7
40
ABCi
51
DTV Manual Tuning - Satellite
WEAK
Signal Strength
Quality
Satellite
POOR
Start Scan
STRONGAVERAGE
ASTRA 28.2°E
Transponder
1/83
Frequency
10714 MHz
Symbol Rate
22000 KS/s
Polarisation
H
Search Option
Free to Air
DTV Manual Tuning
English
NOTE: The content of this menu varies depending on the DTV
input (Antenna, Cable, or Satellite) that is currently selected.
Manual Tuning
This feature is available for service engineers or can be used for
direct channel entry if the multiplex channel is known.
a Select DTV Manual Tuning from the System Setup
menu and press OK.
b Enter the multiplex number using the number
buttons or use
down.
C or c to adjust the number up or
c Highlight Start Scan and press OK. The television will
automatically search for that multiplex.
Manual Tuning for DVB-C
When Ant/Cable/Satellite is set to Cable, DTV Manual
Tuning items are as follows:
Frequency – input a specific frequency to be scanned
Modulation – choose from one of five QAM modulation
options
Symbol Rate – in put a sp ecifi c baud r ate (K S/s) to be use d for
the manual scan
Highlight Start Scan and press OK.
Manual Tuning for DVB-S
When Ant/Cable/Satellite is set to Satellite, DTV Manual
Tuning items are as follows:
Press
B or b to highlight an item (Satellite, Transponder,
Frequency, Symbol Rate, Polarisation or Search Option)
C or c to select the required option.
and press
Highlight Start Scan and press OK.
When the multiplex is found, any channels that are
not currently in the channel list will be added and the
channel information at the top of the screen will be
updated.
d Repeat as necessary. Press EXIT to finish.
22
DTV Settings
DTV Settings
Channels
Parental PIN Setup
Subtitle and Audio
Parental Control
Local Time Setting
DVB Character Set
Dynamic Scan
Standby Channel Update
Standard
Off
On
Channels
Line No. 1/10
TV
Sort: A-Z Sort
1 ABC ONE
2 ABC TWO
Pos. Name
7 ABC THREE
30 CABC Channel
40 ABC NEWS 24
51 ABCi
822 AA
823 AC
ABC ONE
Pos.
----
Name
Sorting Type Number
Sort
Sort
Channels (Antenna/Cable)
The channel order may be changed to suit your personal
a Select DTV Settings from the System Setup menu
and press OK.
b Select Channels and press OK.
preference.
SETTING UP YOUR TV
Move — Press the GREEN button to activate the
Move feature. Press the
channel you wish to move and press OK to check.
If you wish to move multiple channels at once, select
another channel and check in the same way. Repeat
as necessary.
Once all desired channels have been checked, press
the
B or b buttons to place the focus at the position
to which you wish to move the channels. The
channels will be inserted above the highlighted
channel. Press the GREEN button to execute the
move.
B or b buttons to select the
English
c For y our c onv eni enc e, yo u ca n jum p to spe cifi c pl ace s
in the list by one of two methods.
Line Number Jump —Use the number buttons
(0-9) to input the line number you want to select and
press OK.
Name Jump —Press CC or cc to jump to the
next station name with a different initial letter.
It is also possible to change the Position number of a
particular channel.
Renumber — Press the RED button to renumber
the highlighted channel. Edit the channel number
using the number buttons and press OK. If the
position number you input already exists, a
confirmation window will appear.
23
Channels
Line No. 1/10
Pos. Name
1 ABC ONE
2 ABC TWO
7 ABC THREE
30 CABC Channel
40 ABC NEWS 24
51 ABCi
822 AA
823 AC
TV
Sort: A-Z Sort
Sort — Press the YELLOW button. A confirmation
window will appear. Press
press OK.
Sort
Your existing channel order will be lost. Do you wish to
continue?
The Sorting Type selection window will appear.
C or c to set the sorting type.
Press
A-Z Sort Station name order (A to Z)
Number Position No. order (numerical sequence)
Press
b to highlight Sort and press OK.
C or c to select Yes and
Yes
SETTING UP YOUR TV
Channels
Line No. 3/1200
Satellite TV
1 DDD 19.2°E
Pos. Station Satellite
822 AA
823 AC
2AB
3E
801 BBC
802 BB
803 BA
25.6°E
25.6°E
19.2°E
19.2°E
22.5°E
22.5°E
22.5°E
Group By Satellite
Sorting Type Number
Preset Order Yes
Sort
Sort
English
Channels (Satellite)
a Select DTV Settings from the System Setup menu
and press OK.
b Select Channels and press OK.
The satellite channel list will appear.
c For your convenience, you can edit and sort your
channel list.
Line Number Jump — Press the number buttons
(0-9) to input the line number you want to select and
press OK.
Station Letter Jump — Press CC or cc to jump
to the next station name with a different initial letter.
Satellite Jump —Press Z or z to jump to the
next channel on a different Satellite.
Renumber — Same as Antenna/Cable channels.
See page 23.
Move — Same as Antenna/Cable channels. See
page 23.
Sort — Press the YELLOW button. A confirmation
window will appear. Press
press OK.
The Sort menu will appear.
C or c to select Yes and
Group —Press C or
Sorting Type — Press C or
A-Z Sort Station name order (A to Z)
Number Position No. order (numerical sequence)
Preset Order — Press C or
This item is displayed when Country is set to
Germany, and only applies to the Astra 19.2°E
satellite.
Press
b to highlight Sort and press OK.
c to select All or By Satellite.
c to set the sorting type.
c to set Yes or No.
Standby Channel Update
If the Standby Channel Update is set to On, when the TV is in
standby mode, Digital Tuning is automatically executed and any
new channels are saved.
a Select DTV Settings from the System Setup menu
and press OK.
b Press b to select Standby Channel Update and
press
C or c to select On.
DVB Character Set
This feature allows you to manually select the character set
(Standard = Table 0, West = Table 5 or Latin alphabet 9) to
be used for DVB-C or DVB-T channels.
a Select DTV Settings from the System Setup menu
and press OK.
b Press b to select DVB Character Set and press C or
c to select Standard, West or Latin alphabet 9.
Dynamic Scan
If the broadcast information has changed in your DVB-T
receiving area, the TV screen will display the message
“Broadcast information has changed. Would you like to
rescan now?”. Select Yes or No. If you do not wish for the TV to
detect changes and prompt you to rescan, you shou ld set this
feature to “Off”.
a Select DTV Settings from the System Setup menu
and press OK.
b Press b to select Dynamic Scan and press C or c to
select On.
24
Location setting
You can select either Home or Store mode. Home is
recommended for normal home use. Select Store when using
the television for displaying in a shop, etc.
a Select Location from the System Setup menu.
b Press C or c to select Home or Store.
Analogue switch-off
This is a digital television which is integrated to allow the use
of both digital and analogue services. However, during the
lifetime of this set it is very likely that analogue services will
be switched off to allow for more new digital services.
This “switch-off” will happen in a number of phases, which will
be advertised in your area well in advance. It is recommended
that at each phase the television is re-tuned to ensure that
existing and new digital services can be viewed without
disruption.
SETTING UP YOUR TV
English
25
CONTROLS AND FEATURES
50
Quick Menu
Picture Size
Picture Mode AutoView
Super Live
More Information
3D Settings
Personal Mode
Sleep Timer
Channel Options
TV Speakers
Headphone Level
REGZA-LINK Device Control
Wireless Information
Speakers
00:00
General controls
English
Quick Menu
Quick Menu helps you access some options quickly, such as
Picture Mode, Picture Size, Personal Mode, More
Information, Sleep Timer etc.
Press QUICK to display the Quick Menu and use
select the option.
NOTE: Quick Menu items are different depending on the
current mode.
Quick menu item example
Mode Quick menu item Description
When viewing a TV
programme or
pictures from the
external input
Single Window or
3D Single Window
When using EPG Genre Colour See page 66.
Media Player
(Photo Multi View,
List View)
Picture Mode See page 35.
Picture Size See page 33.
3D Settings See page 28.
Personal Mode See page 75.
More Information See page 65.
Channel Options See page 68.
Sleep Timer See page 64.
REGZA-LINK Device
Control
Speakers See page 77.
Headphone Level See page 32.
Wireless Information See page 45.
EPG Update/
Cancel EPG Update
Sort See page 56.
Interval Time See page 55.
Repeat See page 55.
Shuffle See page 59.
Device Information See page 56.
Wireless Information See page 45.
B or b to
See page 78.
See page 66.
Mode Quick menu item Description
Photo Frame
(Full Screen)
Picture See page 35.
Picture Size See page 33.
3D Settings See page 28.
Personal Mode See page 75.
Selecting channels
To select a channel, use the numbered buttons on the remote
control.
Channels can also be selected using P
To display on-screen information such as channel, input
mode or stereo/mono signal, press . Press again to
cancel.
U and Pu.
The Time Display – analogue only
The time display facility allows the current (text service) time to
Press
to see the time display from the broadcaster. It will remain on
screen for about 5 seconds.
NOTE: This display may not be available in some cases.
be seen on the television screen.
D whilst watching a normal television broadcast
Stereo and Bilingual transmissions
For DTV programmes
For ste reo or d ual m ono bro adc asts , pr ess s and use C or
c to select settings.
Mode Display Pressing c
Stereo Stereo S Left S Right
Dual mono Dual 1
Mono –
Multichannel –
For multi-audio track broadcasts, press
change the audio language (see “Audio languages” on
page 69).
S Dual 2 S Dual
s repeatedly to
For ATV programmes
If stereo or dual language broadcasts are transmitted, the
word Stereo or Dual will appear on the screen each time
positions are changed, disappearing after a few seconds. If
the broadcast is not in stereo, the word Mono will appear.
Stereo… Press
Bilingual… Bilingual transmissions are rare. If they are
transmitted, the word Dual will be displayed. Choose the
required programme number, and if the word Dual appears,
press
s to select Stereo or Mono.
s to select Dual 1, Dual 2 or Mono.
26
Using 3D functions
Trigger of Switching
Display Mode
Press 3D
button
Input Signal
Type Additional
Info
Format Source
Signal
3D
Format
Signal
With 3D Auto
Detect
Information
FP
*
SBS
*
TB
*
Without 3D
Auto Detect
Information
SBS
*
TB
2D Format Signal
3D 3D
DD3
3
3D
D
3
Before using 3D programming, see and follow
“When using the 3D glasses” section on page 6.
Viewing 3D programming requires the following:
• TOSHIBA 3D Glasses FPT-P200 (supplied)
• Compatible 3D playback device or 3D source
• 3D capable high quality HDMI cable
Viewing 3D images
Incoming video signals can either be in 2D or 3D format. A 2D
signal can only be viewed as 2D, but 3D can be viewed in either
2D or 3D. If the TV can detect the fact that a signal is 3D, it can
change to 3D mode automatically - see “Setting the auto start
mode” (on page 29). Otherwise the user can change the viewing
mode using the 3D button. Finally, the format of the 3D signal
can be either Side by Side (SBS) or Top and Bottom (TB). You may
have to choose the correct format if the TV can not detect it
automatically - see “Switching display mode or selecting 3D
NOTE:
• When 3D format signal is not received, display mode is not
switched to 3D.
• The 3D button is available in digital channels or HDMI input.
• If appropriate mode and format are not selected, 3D image
is not correctly displayed.
• There will be restrictions on the Picture Size settings for 3D
Mode and 2D Mode.
• There are individual differences in perception of 3D images.
• When viewing 3D images, wear the 3D Glasses.
Switching display mode or selecting 3D
There are three modes for watching TV.
Mode Description
3D Displays 3D images.
2D Changes 3D images to 2D.
Native Displays a received signal format as it is.
format”, below.
format
CONTROLS AND FEATURES
English
3D format select:
If a right and left images are same in Native mode, select SBS.
If a top and bottom images are same in Native mode, select
TB. 3D formats are the following.
3D format Description
Side by
Side (SBS)
Top and
Bottom
(TB)
Frame
Packing
(FP) *
* This format cannot be selected manually.
Images for the left and right eyes
are positioned side-by-side.
Images for the left and right eyes
are positioned at the top and
bottom of the screen.
Image for the left and right eyes for
two frames are positioned at the
top and bottom of the screen.
The 3D button's operation:
The behaviour of 3D when viewing in Native mode is different
depending on the input mode.
Depending on the input mode, the screen for selecting 2D or
3D is displayed or the display mode switches between 2D and
3D.
To switch to 3D mode:
•Set Preferences / 3D Setup / 3D Auto Start to 3D.
•Press 3D while viewing 2D mode or Native mode.
3D
3D
3D
3D
3D 3D
3D
3D
* Correct 3D image
27
CONTROLS AND FEATURES
Trigger of Switching
Display Mode
Quick menu
Input Signal 3D Fomat Select
Type Additional
Info
Format Source
Signal
SBS TB
3D
Format
Signal
With 3D
Auto Detect
Information
FP
SBS
TB
Without 3D
Auto Detect
Information
SBS
*
TB
*
2D Format Signal
3D
3D 3D
3D
3D
DD3
3
D
3
3D
Trigger of Switching
Display Mode
Press 3D
button
Input Signal
Type Additional
Info
Format Source
Signal
3D
Format
Signal
With 3D Auto
Detect
Information
FP
*
SBS
*
TB
*
Without 3D
Auto Detect
Information
SBS
TB
2D Format Signal
*
3D
3D 3D
3D
3D
3D
3D
3D 3D
3D
3D
3D
Trigger of Switching
Display Mode
Quick menu
Input Signal 2D Fomat Select
Type
Additional
Info
Format
Source
Signal
SBS TB Native
3D
Format
Signal
With 3D
Auto Detect
Information
FP
SBS
*
TB
*
Without 3D
Auto Detect
Information
SBS
*
TB
*
2D Format Signal
3D
3D
3D 3D3D3D 3D
3D
3D
3D
3D
3D
3D 3D3D3D 3D
3D
3D
3
3
3D
3D
3D
3D33D
To select 3D format from the Quick menu in 3D
mode:
English
a Press QUICK to display the Quick Menu.
b Press B or b to select 3D Settings and press OK.
c Press B or b to select 3D Format Select and press
OK.
d Press C or c to select Side by Side or Top and
Bottom.
3D
3D 3D
3D
3D
3D
3D
3D
* Correct 3D image
To switch to 2D mode:
•Set Preferences / 3D Setup / 3D Auto Start to 2D.
• Press 3D while viewing 3D mode or Native mode.
To select 2D format from the Quick menu in 2D
mode:
a Press QUICK to display the Quick Menu.
b Press B or b to select 3D Settings and press OK.
c Press B or b to select 2D Format Select and press
OK.
d Press C or c to select 2D (SBS) or 2D (TB).
* Correct 2D image
NOTE: Take off the 3D Glasses in 2D mode.
To switch to Native mode:
•Press 3D while viewing 3D mode.
•From the Quick Menu in 2D mode.
a In the Quick Menu, press B or b to select 3D
Settings and press OK.
3D
3D
* Correct 2D image
3D
3D 3D
3D
3D
b Press B or b to select 2D Format Select and press
OK.
c Press C or c to select Native.
NOTE: When Frame Packing is input, 2D Format
Select will be grayed out.
28
Loading...