Datasheet TPC8202 Datasheet (TOSHIBA)

查询TPC8202供应商
TOSHIBA Field Effect Transistor Silicon N Channel MOS Type (π−MOSVI)
TPC8202
TPC8202
Lithium Ion Battery Applications
Portable Equipment Applications
l 2.5-V Gate drive l Small footprint due to small and thin package l Low drainsource ON resistance : RDS l High forward transfer admittance : |Yfs| = 9 S (typ.) l Low leakage current : I
= 10 µA (max) (VDS = 20 V)
DSS
l Enhancementmode : Vth = 0.5~1.1 V (VDS = 10 V, ID = 200 µA)
Maximum Ratings
Characteristics Symbol Rating Unit
Drain-source voltage V
Drain-gate voltage (RGS = 20kΩ) V
Gate-source voltage V
Drain curren
Drain power dissipation (t = 10s) (Note 2a)
Drain power dissipation (t = 10s) (Note 2b)
Single pulse avalanche energy (Note 4)
Avalanche current (Note 1) I
Repetitive avalanche energy Single-device value at operation (Note 2a, Note 3b, Note 5)
Channel temperature Tch 150 °C
Storage temperature range T
(Ta = 25°C)
D C (Note 1) I
Pulse (Note 1) I
Single-device operation (Note 3a)
Single-device value at dual operation
Single-device operation (Note 3a)
Single-device value at dual operation
(Note 3b)
(Note 3b)
DSS
DGR
GSS
DP
P
D (1)
P
P
P
D(2)
D (1)
D (2)
E
AR
E
= 41 mΩ (typ.)
(ON)
D
1.5
1.1
0.75
0.45
AS
AR
stg
20 V
20 V
±12 V
5
20
32.5 mJ
5 A
0.1 mJ
55~150 °C
A
W
W
Unit: mm
JEDEC
JEITA
TOSHIBA 2-6J1E
Weight: 0.080 g (typ.)
Circuit Configuration
Note: For (Note 1), (Note 2a), (Note 2b), (Note 3a), (Note 3b), (Note 4) and (Note 5) please refer to the next page.
This transistor is an electrostatic sensitive device. Please handle with caution.
1
2003-02-20
Thermal Characteristics
Characteristics Symbol Max Unit
TPC8202
Thermal resistance, channel to ambient (t = 10s) (Note 2a)
Thermal resistance, channel to ambient (t = 10s) (Note 2b)
Single-device operation
(Note 3a)
Single-device value at dual operation
(Note 3b)
Single-device operation
(Note 3a)
Single-device value at dual operation
(Note 3b)
R
th (ch-a) (1)
R
th (ch-a) (2)
R
th (ch-a) (1)
R
th (ch-a) (2)
83.3
114
°C/W
167
278
Marking
(Note 6)
TPC8202
Type
Lot No.
Note 1: Please use devices on condition that the channel temperature is below 150°C.
Note 2:
a) Device mounted on a glass-epoxy board (a) b) Device mounted on a glass-epoxy board (b)
FR-4
25.4 × 25.4 × 0.8 (Unit: mm)
(a)
(b)
Note 3:
a) The power dissipation and thermal resistance values are shown for a single device
(During single-device operation, power is only applied to one device.).
b) The power dissipation and thermal resistance values are shown for a single device
(During dual operation, power is evenly applied to both devices.).
Note 4: V
= 16 V, Tch = 25°C (initial), L = 1.0 mH, RG = 25 Ω, IAR = 5 A
DD
Note 5: Repetitive rating; pulse width limited by maximum channel temperature.
Note 6: on lower right of the marking indicates Pin 1.
Weekly code:(Three digits)
Week of manufacture (01 for first week of year, continues up to 52 or 53)
FR-4
25.4 × 25.4 × 0.8 (Unit: mm)
Year of manufacture (One low-order digits of calendar year)
2
2003-02-20
TPC8202
Electrical Characteristics
(Ta = 25°C)
Characteristics Symbol Test Condition Min Typ. Max Unit
Gate leakage current I
Drain cutoff current I
Drainsource breakdown voltage V
(BR) DSS
Gate threshold voltage V
R
Drainsource ON resistance
DS (ON)
R
DS (ON)
GSS
DSS
th
VGS = ±10 V, VDS = 0 V — — ±10 µA
VDS = 20 V, VGS = 0 V — — 10 µA
ID = 10 mA, VGS = 0 V 20 — — V
VDS = 10 V, ID = 200 µA 0.5 — 2.0 V
VGS = 2.5 V, ID = 2.5 A — 53 70 m
VGS = 4 V, ID = 2.5 A — 41 50 m
Forward transfer admittance |Yfs| VDS = 10 V, ID = 2.5 A 4 9 — S
Input capacitance C
Reverse transfer capacitance C
Output capacitance C
— 570 —
iss
VDS = 10 V, VGS = 0 V, f = 1 MHz
80
rss
oss
— 285 —
Rise time tr — 21
Turnon time ton — 30
Switching time
Fall time tf — 19
pF
ns
Turnoff time t
Total gate charge (Gate−source plus gate−drain)
Gatesource charge Qgs — 8 —
off
Q
13
g
V
16 V, VGS = 5 V, ID = 5 A
DD
Gatedrain (“miller”) charge Qgd
— 110 —
— 5 —
SourceDrain Ratings and Characteristics
Characteristics Symbol Test Condition Min Typ. Max Unit
Drain reverse current
Forward voltage (diode) V
Pulse (Note 1) I
DRP
DSF
IDR = 5 A, VGS = 0 V — — −1.2 V
(Ta = 25°C)
— — 20 A
nC
3
2003-02-20
TPC8202
4
2003-02-20
TPC8202
5
2003-02-20
TPC8202
6
2003-02-20
TPC8202
A
RESTRICTIONS ON PRODUCT USE
· TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc..
· The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer’s own risk.
· The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others.
· The information contained herein is subject to change without notice.
000707EA
7
2003-02-20
Loading...