Toshiba TLP-S220, TLP-T520, TLP-T520E, TLP-T521, TLP-T720 User Manual

...

OWNER’S MANUAL

3LCD DATA PROJECTOR

TLP-T720 (XGA / High Brightness / With PC Card Slot) TLP-T721

(XGA / High Brightness / With PC Card Slot & Document Camera)

TLP-T620 (XGA / High Brightness) TLP-T621 (XGA / High Brightness / With Document Camera) TLP-T520 (XGA / With PC Card Slot) TLP-T521 (XGA / With PC Card Slot & Document Camera) TLP-T520E (XGA / With PC Card Slot) TLP-T521E (XGA / With PC Card Slot & Document Camera) TLP-S220 (SVGA) TLP-S221 (SVGA / With Document Camera)

L . +

AUTO

INPUT

N / S

Before Using

Preparations

Operations

TLP-T720 / TLP-T620 / TLP-T520 / TLP-T520E / TLP-S220

Maintenance

Others

IMPORTANT SAFETY INSTRUCTIONSSAFETY PRECAUTIONS

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE

THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.

WARNING: Handling the cord on this product or cords associated with accessories sold with

USA only

FCC Radio Frequency Interference Statement

Note: This equipment has been tested and found to comply with the limits for a Class

USA only

WARNING: Changes or modifications made to this equipment, not expressly approved by

USA only

Notice: This Class A digital apparatus complies with Canadian ICES-003. Cet appareil

CANADA only

WARNING: This is a Class A product. In a domestic environment this product may cause

this product, will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm.

A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiates radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Toshiba, or parties authorized by Toshiba, could void the user’s authority to operate the equipment.

numérique de la classe A est conforme à la norme NMB-003 du Canada.

radio interference in which case the user may be required to take adequate measures.

Wash hands after handling.

CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND

INSTRUCTIONS GIVEN IN THIS OWNER'S MANUAL AND THOSE MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE.

This set has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this unit will protect you if you observe the following procedures for installation, use and servicing. This unit is fully transistorized and does not contain any parts that can be repaired by the user.

DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.

1. Read Owner's Manual

After unpacking this product, read the owner's manual carefully, and follow all the operating and other instructions.

3. Source of Light

Do not look into the lens while the lamp is on. The strong light from the lamp may cause damage to your eyes or sight.

4. Ventilation

2. Power Sources

This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions.

Openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to.

Before Using

CAUTION: Laser beam is emitted when the laser button of the remote control is pressed.

Do not look from the front of the remote control. Do not face toward a person or to a mirror.

2 3

IMPORTANT SAFETY INSTRUCTIONS (Continued)

5. Heat

The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

6. Water and Moisture

Do not use this product near water.

- for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool and the like.

7. Cleaning

Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a soft cloth for cleaning.

8. Power-Cord Protection

Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product.

9. Overloading

Do not overload wall outlets; extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.

10. Lightning storms

For added protection for this product during storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet. This will prevent damage to the product due to lightning and power-line surges.

11. Object and Liquid Entry

Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.

12. Do not place the product vertically

Do not use the product in the upright position to project the pictures at the ceiling, or any other vertical positions. It may fall down and dangerous.

13. Stack Inhibited

Do not stack other equipment on this product or do not place this product on the other equipment. Top and bottom plates of this product develops heat and may give some undesirable damage to other unit.

14. Attachments

Do not use attachments not recommended by the product manufacturer as they may cause hazards.

Before Using

15. Accessories

Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer's instructions, and should use a mounting accessory recommended by the manufacturer. A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn.

S3125A

4 5

IMPORTANT SAFETY INSTRUCTIONS (Continued)

16. Damage Requiring Service

Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:

a) When the power-supply cord or

plug is damaged.

b) If liquid has been spilled, or

objects have fallen into the product.

c) If the product has been exposed to

rain or water.

d) If the product does not operate

normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation.

e) If the product has been dropped or

damaged in any way.

f) When the product exhibits a

distinct change in performance this indicates a need for service.

17. If glass components, including lens and lamp, should break, contact your dealer for repair service.

This product incorporates glass components, including a lens and a lamp. If such parts should break, please handle with care to avoid injury and contact your dealer for repair service. The broken pieces of glass may cause to injury. In the unlikely event of the lamp rupturing, thoroughly clean the area around the projector and discard any edible items placed in that area.

18. Servicing

Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

19. Replacement Parts

When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. (Replacement of the lamp only should be made by users.)

20. Safety Check

Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.

21. Do not leave thermal-paper documents or easily deformed items on top of the unit or near the air exhaust for long periods of time.

The heat from the unit could erase the information on the thermal paper, or cause deformation or warping.

22. When using a wireless LAN PC card

equipped with PC card slot):

••

• Do not use near people

••

(Models

with heart pacemakers

••

• Do not use near electronic

••

medical equipment, or in hospitals or other medical institutions

••

• Do not use inside aircraft

••

or in places where the wireless LAN card could interfere with electromagnetic signals.

The electromagnetic interference could cause a malfunction, resulting in an accident.

23. If the use of a wireless LAN PC card interferes with another device’s electromagnetic signals, cease use immediately.

(Models equipped with PC card slot)

The electromagnetic interference could cause a malfunction, resulting in an accident.

24. Do not get your hands between the camera arm and the main unit when setting the camera arm back in its original position.

with document camera)

To avoid injury, be careful not to get your hands caught when setting the camera arm back in its original position. Families with children should be particularly careful.

(Models equipped

25. Do not carry by the camera arm.

(Models equipped with

document camera)

Do not carry the projector by the camera arm. Doing so can result in damage or injury.

26. Do not move the projector while the arm is still erect.

(Models equipped with document camera)

Always store the arm back in position when moving the projector. Otherwise injury or damage may result.

27. Do not look into the arm light while it is lit.

equipped with document camera)

The strong light may cause damage to your eyes or sight.

(Models

28. Do not carry the projector by having the terminal cover parts or the PC card cover part

Doing so, the projector may fall if that cover comes off, and injury or damage may result.

Before Using

6 7

LABEL LOCATIONS

MODEL NO. / RATING Label

F A N

T E

P L A

A U

T O

S E T

E Y S

I N

/STAN

DBY

3.3A

1.5A3.3

SERIAL NO. Label

MANUFACTURED;

SERIAL NO.

WARNING LabelCAUTION Label

CAUTION Label

WARNING Label

CAUTION Label (LED)

POWER SUPPLY CORD SELECTION

If your line voltage is 220 to 240V, use one of the following types of cable.

Plug configuration

Plug type

EURO

Line voltage

220 – 240V

Plug configuration

Plug type Line voltage

Australian

200 – 240V 240V 10A

220 – 240V

Switzerland 240V

200 – 240V

Use a 5A fuse which is approved by ASTA or BSI to BSI362. Always replace the fuse cover after changing the fuse.

North American 240V 15A

200 – 240V

IMPORTANT PRECAUTIONS

Save Original Packing Materials

The original shipping carton and packing materials will come in handy if you ever have to ship your LCD projector. For maximum protection, repack the set as it was originally packed at the factory.

Before Using

CAUTION Label (LASER)

Remote Control

CAUTION Label (LASER)

Moisture Condensation

Never operate this unit immediately after moving it from a cold location to a warm location. When the unit is exposed to such a change in temperature, moisture may condense on the crucial internal parts. To prevent the unit from possible damage, do not use the unit for at

A L P

P N I

LASER WARNING

Models with Document Camera

CAUTION Label

Models with Document Camera

8 9

least 2 hours when there is an extreme or sudden change in temperature.

Place and Manner of Installation

• Do not place in hot locations, such as near heating equipment. Doing so could cause

malfunction, and shorten the life of the LCD panel.

• Avoid locations with oil or cigarette smoke. Doing so will dirty the LCD panel and other

optical parts, shortening their lives, and darkening the screen.

• Do not use in angle of 20° or more degrees. Doing so could shorten the life of the lamp.

• If used at high altitudes, the unit could cease operation even if used within the rated

temperature range. This is because the thinner air at high altitudes decreases the internal cooling efficiency. Therefore, please lower the ambient temperature if using at high altitudes.

IMPORTANT PRECAUTIONS (Continued) EXEMPTION CLAUSES Avoid Volatile Liquid

Do not use volatile liquids, such as an insect spray, near the unit. Do not leave rubber or plastic products touching the unit for a long time. They will leave marks on the finish. If cleaning with a chemically saturated cloth, be sure to follow the product's precautions.

Wireless LAN PC Card (Models equipped with PC card slot)

• Do not connect the supplied wireless LAN PC card to devices other than this unit. Doing so

could cause malfunction.

• To protect the PC card from static electricity, touch some nearby metal, such as a doorknob

or aluminum window frame, before touching the PC card, to rid your body of static electricity.

• This PC card is a radio product. Concerning the regulations applied in each country/area,

please refer to “Information to the user” supplied.

LCD Panel

The life of the LCD panel is limited. Take care over the points below so as to use the panel for years.

• To prolong the life of this panel, never fail to turn the power off when the panel is not in use

and make sure that the lamp has gone out. The state of the lamp being extinguished helps enhance the effect of energy saving.

• If the air filter is stained and is clogged up, the main unit inner temperature rises. As a

result, the life of the LCD is shortened and a malfunction may also occur. Clean the air filter from time to time and replace it regularly. It is recommended that this replacement be done at the time of replacing a lamp. (Ask a dealer where the unit was purchased or your nearby service station about an air filter for replacement.)

In the spaces provided below, record the Model and Serial No. located at the bottom of your LCD projector. Model No. Serial No.

Retain this information for future reference.

• Toshiba Corporation bears no responsibility in the case of damages arising from natural

disaster such as earthquakes, lightning, etc., fire not liable to Toshiba Corporation, operating by third parties, other accidents, or use under abnormal conditions including erroneous or improper operation and other problems.

• Toshiba Corporation bears no responsibility for incidental damages (lost profit, work

interruption, corruption or loss of the memory contents, etc.) arising from the use of or the inability to use this unit.

• Toshiba Corporation accepts no liability whatsoever for any damages arising from not having

followed the descriptions in this Instruction Manual.

• Toshiba Corporation accepts no liability whatsoever for any damages arising from

malfunctions arising from combination with equipment or software that is not related to Toshiba Corporation.

• Toshiba bears no responsibility for information being intercepted or leaked due to the use of

a wireless LAN, or any damages therefor (models with PC card slot).

OTHER CAUTIONS AND INFORMATIONS

Copyrights

Publicly showing or transmitting commercial imaging software or broadcast or Cable-broad casting programs, either commercially or collecting a fee from the audience, or modifying images using the freeze or resize functions, could violate the direct or indirect copyrights of the imaging software or broadcast program, etc., if done without first consulting with the copyright holder. For this reason, please take appropriate measures before performing one of the actions listed above, including obtaining a license from the copyright holder.

Disposal

This product contains substances which are harmful to humans and the environment.

• The solder used in the PCB manufacturing process contains lead.

• The lamp contains inorganic mercury.

Please dispose of this product or used lamps in accordance with local regulations.

Trademarks

• VGA, SVGA, XGA, SXGA, UXGA are trademarks or registered trademarks of International

Business Machines Corporation.

• Macintosh is a registered trademark of Apple Computer, Inc.

• Windows is a registered trademark of Microsoft Corporation in the U.S. and other countries.

Before Using

Notational Conventions Used in This Manual

References to pages with related information are annotated as follows. For example, if making a reference to page 36:

10 11

p.36

Before Using

SAFETY PRECAUTIONS .................................................................................. 2

IMPORTANT SAFETY INSTRUCTIONS ........................................................... 3

LABEL LOCATIONS .......................................................................................... 8

POWER SUPPLY CORD SELECTION .............................................................. 9

IMPORTANT PRECAUTIONS ........................................................................... 9

EXEMPTION CLAUSES .................................................................................... 11

OTHER CAUTIONS AND INFORMATIONS ...................................................... 11

CONTENTS ....................................................................................................... 12

Preparations

Checking the package contents ......................................................................... 14

Names of each part on the main unit ................................................................. 15

Names of each part on the control panel and remote control ............................ 16

Names of each part on the camera control panel .............................................. 17

Names of each part on the PC card slot ............................................................ 17

Names of the connection terminals ................................................................... 18

Preparing and using the remote control ............................................................. 19

Placement .......................................................................................................... 21

Connection ......................................................................................................... 22

How to use the PC card slot .............................................................................. 23

Installing the application .................................................................................... 24

Operations

Turning the power on and off ............................................................................. 25

Basic operations ................................................................................................ 27

Using handy features ......................................................................................... 29

Using auto setting (Auto setting) .................................................................... 29

Correcting the keystone distortion (Keystone)................................................ 30

Cutting off the picture and sound temporarily (Mute) ..................................... 30

Freezing the image (Freeze) .......................................................................... 31

Enlarging the picture size (Resize) ................................................................. 31

Displaying Information .................................................................................... 32

Using the wireless LAN PC card ........................................................................ 33

Functions ........................................................................................................ 33

Communication mode .................................................................................... 33

Caution when using the wireless LAN functions ............................................ 34

Preparation ..................................................................................................... 34

Displaying a computer’s screen via the projector ........................................... 36

Displaying a JPEG image saved on a computer via the projector.................. 38

Operating the projector ................................................................................... 39

Projecting images stored in a memory PC card ................................................ 41

Memory PC cards ........................................................................................... 41

JPEG files ....................................................................................................... 42

Projecting images stored in a memory PC card ............................................. 42

Using the document camera .............................................................................. 45

Preparation of the document camera ............................................................. 45

Image projection with the document camera .................................................. 45

Using the overlay function .............................................................................. 47

Locking the white balance .............................................................................. 47

Correcting illuminated defects ........................................................................ 48

Sending the camera’s images to a computer ................................................. 49

Storing the camera images into the memory card ......................................... 51

Operating a computer using the remote control ................................................ 52

Using the menus ................................................................................................ 53

How to use the menus .................................................................................... 53

The image adjustment menus ........................................................................ 54

The default setting menu ................................................................................ 54

The display setting menu................................................................................ 55

The PC card setting menu .............................................................................. 55

Reset menu .................................................................................................... 56

Maintenance

Air filter cleaning ................................................................................................ 57

Lens and main unit cleaning .............................................................................. 58

Lamp replacement ............................................................................................. 58

Others

How to use the supplied software ...................................................................... 60

How to use the Projector Configuration Tool .................................................. 60

How to use the JPEG Conversion Tool........................................................... 62

Trouble indications ............................................................................................. 65

Before calling service personal .......................................................................... 66

Specifications ..................................................................................................... 68

List of general specifications .......................................................................... 68

Document camera specifications ................................................................... 68

List of supported signals (RGB signals) ......................................................... 69

List of supported signals (Y/P

List of supported signals (Video, S-Video signals) ......................................... 70

Pin assignment of COMPUTER-1/2 & MONITOR terminals .......................... 70

CONTROL terminal ........................................................................................ 71

Separately sold products ................................................................................ 71

B/PR signals) .................................................... 70

Before Using

1312

Checking the package contents

Names of each part on the main unit

Please make sure that the following items are included in the box, along with the main unit. If an item is missing, please contact the store from which you purchased the product immediately.

+ . L O

E S A L

A L P

R K E C

I N L

E C

U P

D O

O T S

(1)

(5) (9) (13)

(2) (6) (10)

(3) (7) (11)

(14)

(4) (8) (12)

■■ (1) Remote control

■■ (2) LR03 (SIZE AAA) dry-cell batteries

for remote control (2)

■■ (3) Wireless LAN PC card

■■ (3) Information to the user

(See note 1)

■■ (4) Quick Reference

■■ (5) CD-ROM

■■ (6) Owner’s Manual

■■ (7) Power cord

(See note 4)

■■ (8) RGB cable

■■ (9) AV cable

) Audio cable (for computer)

■■ (

) USB cable

■■ (

■■ (12) Mouse remote control receiver

(See note 2)

■■ (13) Carrying bag

) License information

■■ (

(See note 3)

(See note 2)

Notes

1: Included with models equipped with PC card slot, except TLP-T520E/T521E. 2: Included with models equipped with PC card slot. 3: Included with models not equipped with PC card slot. 4: The shape and number of power cords supplied vary depending on the product destination.

◆The Supplied CD-ROM

The supplied CD-ROM contains an owner’s manual including information omitted in the Owner’s manual (Getting started), Acrobat

p.24

and applications

for using the functions of models equipped with a PC card slot.

■ Installing Acrobat® Reader™

Windows: In the CD-ROM, select the Reader/English folder, and run ar500enu.exe. Follow the on-screen instructions. Macintosh: In the CD-ROM, select the Reader/English folder, and run Reader Installer. Follow the on-screen instructions to install the software.

■ Viewing the manual

In the CD-ROM, double-click on Start.pdf. Acrobat® Reader™ launches, and the menu screen of the Owner’s manual appears. Click on your language. The Owner’s Manual cover and list of bookmarks appear. Click on a bookmark title to view that section of the manual. Click on menu for more information about Acrobat

to view a reference page with related information. See the Help

Reader™, which is needed to view the manual,

Reader™.

(6) (5) (4) (2)(3) (1)

(7) (8) (9) (12)(11)(10)

(14)(15)

(16)

(10)

(14) (15)

(13)

Y B D

N A T

S /

P N I

O T

T S

Y E K

. L O

T E S

T U A

(14)(15)

U N E

+ . L

M A L

M E T

N A F

(14)

(18)(22)

LED Light

(10)

(17)

(16)

(21)

A K

P N I

N T U

TO S

(20)(19)

(13)

/ N

T U A

Y B D

A T S

N E M

+ .

L O V

L T E

T N A

H G I

L M R

A Y A L

R E

E C N

A L A

B .

N I

C O L

E R O

A IM

(15)(1)

Name : Function

(1) Infrared remote sensor : Senses commands from the remote control

p.19

(2) Lens : Projects expanded image (3) Zooming lever : Adjusts screen size (4) Focusing ring : Adjusts screen focus

p.28

(5) Air exhaust : Expels air that has grown hot inside the projector (6) Speaker : Plays audio (7) AC IN socket : Connect the supplied power cord here

p.25

(8) Anti-theft lock hole : Attach a security chain, etc. here (9) Lamp cover : Remove to replace lamp (10) Tilt adjuster : Adjusts the projector’s horizontal tilt (11) Foot adjuster : Adjusts the vertical projection angle (12) Foot adjuster release button : Press to stow the foot adjuster (13) Control panel : Operates the projector (14) Connection terminal cover : Remove to connect to an external device (15) Air intake : Draws in air from outside unit

) PC card slot cover

( (17) Camera head (

) Camera lens

) Camera focusing ring

( (20) Camera arm (21) Camera control panel (22) Camera light

Notes

1: Models equipped with PC card slot 2: Models equipped with document camera

[See note 2]

[See note 1]

[See note 2]

: Remove to mount/remove the PC card : The document camera : The document camera’s lens : Adjusts document camera focus : Adjusts the camera angle : Operates the document camera : Shines light on the object that the document camera is

photographing

p.45

p.59

p.28

p.16

p.18

p.23

p.46

p.45

p.17

ERA

Preparations

(1)

1514

Names of each part on the control panel and remote control

Names of each part on the camera control panel

(Models equipped with document camera)

Control panel

(1)(2)

ON/STANDBY

INPUT

Front

Remote Control

Remote control transmitter

Laser

Rear

emitter

AUTO

(3)

(4)

KEYSTONE

AUTO SET

VOL.

FAN TEMP LAMP ON

VOL.

( 7) (8 ) (9 ) (10)

(6)

(5)

(19)

VOL.

PJ MODE LASER

(18)

(17)

(2)

(4)

(3)

(1)

MENU / ENTER

AUTO SET FREEZE

AUTO

KEYSTONE

ON/ STANDBY

R-CLICK

INPUT

MUTE

RESIZE

(6)

VOL.

(20)

(11)

(12) (5)

(13)

(14)

OFF

(15)

(16)

R ASE L

PLA

TER

CLICK

R-

INP

OD J M P

SIZE

STOP

OF EZ E

M ET S

O U A

AUT

NDBY

KEYSTON

ON/

STA

Battery cover

Control button cover

Caution - use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

Name : Main Function

(1) ON/STANDBY button : Turns the power on/off (standby) (2) INPUT button : Selects input

p.27

(3) AUTO KEYSTONE button : Adjusts keystone (trapezoidal distortion) (4) AUTO SET button : Sets up image and mode (5) MENU/ENTER button : Displays menus and makes selections (6) Selection button : Menu selections and adjustments, etc. (7) FAN indicator : Displays cooling fan mode

p.25

p.30

p.29

p.53

p.26 p.65

(8) TEMP indicator : Lights when internal temperature too high (9) LAMP indicator : Displays lamp mode (10) ON indicator : Displays whether power is on or off

p.26

p.25

(11) LASER button : Displays laser point

) PLAY button : Begins PC card slide display

( (13) FREEZE button : Pauses image (14) RESIZE button : Enlarges picture size

p.31

(15) OFF button : Turns off enlarged picture display

p.43

p.31

(16) MUTE button : Cuts off the picture and sound temporarily (17) STOP button : Ends PC card slide display (18) PJ MODE button : Switches remote control mode

p.43

p.20

(19) Transmission indicator : Lights when remote control transmitting (

) L-CLICK button : Left button click of remote control mouse

p.65

p.30

p.52

(1)(2)(3)(4)

LOCK

STORE

IMAGE

W.BALANCE OVERLAY

GAIN

ARM LIGHT

CAMERACAMERA

(5) (6) (7)

Name : Functions

(1) ARM LIGHT button : Turns camera light on and off (2) OVERLAY button : Turns overlay function on and off

p.45

p.47

(3) W.BALANCE button : Switches white balance between auto adjust and

p.48

lock (4) LOCK indicator : Lights when white balance locked (5) STORE IMAGE button (6) CAMERA GAIN button : Adjusts camera gain

[See note 1]

: Stores camera images onto a memory PC card

p.46

p.48

(7) CAMERA button : Switches between camera input and previous

p.46

input

Notes

1: Models equipped with PC card slot

Names of each part on the PC card slot

■ Removing the PC card slot cover

Press on the circle (“O”) while sliding the cover

(Models equipped with PC card slot)

(1) (2) (3) (5)(4)

in the direction of the arrow. The cover will come off.

Name : Functions

(1) PC card slot : Insert PC cards here (2) CARD indicator : Displays PC card’s status (3) UNMOUNT button : Press before removing PC card (4) RESET switch (inside depression) : Press if CARD indicator turns red (5) Eject button : Press to remove PC card

p.23

Do not carry the projector by having the PC card slot cover part.

CAUTION

Doing so, the projector may fall if that cover comes off, and injury or damage may result.

1716

p.51

Preparations

Names of the connection terminals Preparing and using the remote control

■ Removing the connection terminal cover

Press on the circle (“O”) while

(2)(3)(4)

sliding the cover in the direction of the arrow. The cover will come off.

USB

MONITOR

CONTROL

R - AUDIO - L

AUDIO

COMPUTER

(

)

Y,P

B/PR

VIDEO

S-VIDEOVIDEO

MONITOR

CONTROL

AUDIO

R - AUDIO - L

(8) (7)(9) (6)

(1) COMPUTER 2 terminal

Input RGB signal from a computer or other source, or a component video signal (Y/P

R) from video equipment.

(2) COMPUTER 1 terminal

Input RGB signal from a computer or other source, or a component video signal (Y/P

R) from video equipment.

(3) MONITOR terminal

Connect to a computer display, etc.

(4) USB terminal

Connect to a computer’s USB terminal when using the remote-control mouse function.

p.52

(5) S-VIDEO terminal

Input S video signals from video equipment.

(6) VIDEO terminal

Input video signals from video equipment.

(7) AUDIO (L/R) terminal

Input audio signals from video equipment.

(8) AUDIO terminal

Input audio signals from a computer or video equipment with a component video signal output terminal.

(9) CONTROL terminal

When operating the projector via a computer, connect this to the controlling computer’s RS-232C port.

Note

p.71

• Although this owner’s manual abbreviates component video signals as Y/PB/PR, the product also supports signals from video equipment marked “Y/C

B/CR.”

Do not carry the projector by having the terminal cover parts.

CAUTION

Doing so, the projector may fall if that cover comes off, and injury or damage may result.

(1)

COMPUTER

)

(

B/PR

Y/P

VIDEO

S-VIDEOVIDEO

(5)

■ Loading dry-cell batteries into the remote control

q Remove the battery cover.

■

Operating the remote control

Point the remote control toward the projector’s infrared remote sensor, and press a button on the remote control.

• Operating the projector from the front

Approx. 15 degree

w Insert the dry-cell batteries.

Approx. 5m

Be sure to align the plus and minus ends of the batteries properly.

• Operating the projector from the rear

T S /

N O

T U P

N I

Y E K

T E S

T U A

Models without document

Y B D N

U N E

camera

+ .

L O V

M A L

M E T

N A F

Approx. 15 degree

Preparations

Two batteries (LR03 (SIZE AAA)) are used.

Approx. 5m

e Replace the battery cover.

B D N A

T S

/ N O

U N E

INP

+ .

L O V

E N O

AUTO

O E K

M O V

L T E

T U A

N A F

(1)

(2)

Models equipped with document camera

Approx. 15 degree

Approx. 5m

Dry-cell batteries

• Remove batteries from remote control when not using for extended periods.

• If the remote control stops working, or if its range decreases, replace all the batteries

with new ones.

The remote control

• The remote control may fail to operate if the infrared remote sensor is exposed to bright sunlight or fluorescent lighting.

• Do not drop or bang.

• Do not leave in hot or humid locations.

• Do not get wet or place on top of wet objects.

• Do not take apart.

• In rare cases, ambient conditions could impede the operation of the remote control. If

this happens, point the remote control at the main unit again, and repeat the operation.

1918

Preparing and using the remote control (Continued)

USB

COMPUTE

R ( Y,P

B/PR

)

S-VIDEOVIDEO

VIDEO

R - A

UDIO - L

AUDIO

NITOR

NTROL

USB

COMPUTER

(

Y,P

B/PR

)

S-VIDEOVIDEO

VIDEO

R - AUDIO

- L

AUD

MONITOR

CONTRO

Placement

■ Switching operation modes

Operation modes should be switched between projector operation and computer operation.

Switching the remote control operation mode.

Pressing this button toggles the mode. When this button is lit, the remote control is in [PJ Mode] (Projector operation mode). If no operations are made for 30 seconds, this light goes out, and the remote switches back to [PC Mode] (Computer operation mode).

[PJ Mode] : Functions as a select button.

If no menu is displayed, adjusts volume.

[PC Mode] : Functions as a mouse pointer control.

RESIZE

OFF

VOL.

Pressing displays a laser pointer, regardless of the mode.

[PJ Mode] : Ends memory card slide display. [PC Mode] : Functions as a down button. Used to go

forward on Microsoft

[PJ Mode] : Begins memory card slide display. [PC Mode] : Functions as an up button. Used to go back on

Microsoft

[PJ Mode] : Functions as a MENU/ENTER button. [PC Mode] : Functions as the right mouse button (R-CLIK).

Pressing one of these buttons automatically sets the remote control to [PJ Mode]. If no operations are made for 30 seconds, and the remote switches back to [PC Mode].

The L-CLICK (left click) button on the back of the remote control functions when in [PC Mode].

; MENU/ENTER button ⇒

PowerPoint® slides, etc.

p.52

, all buttons are

VOL.

PJ MODE LASER

MENU / ENTER

R-CLICK

INPUT

AUTO SET FREEZE

AUTO

MUTE

KEYSTONE

ON/ STANDBY

Notes

• See page 52 for more information on operating a computer.

• For the remainder of this manual, buttons, including those on the control panel (main unit

side), are referred to as follows: Selection button ⇒

With the exception of operating a PC with the remote control used in [PJ Mode].

Placement Styles

As shown in the figures below, this device can be placed in 4 different styles. The factory setting is “floor-mounted front projection.” Set the placement style in the

default setting menu

Floor-mounted front projection

Ceiling-mounted front projection

p.54

, in accordance with your needs.

Floor-mounted rear projection

Ceiling-mounted rear projection

CAUTION

• Always obey the instructions listed in IMPORTANT SAFETY INSTRUCTIONS when placing the unit.

• If you wish to mount the projector on the ceiling, be sure to ask your dealer to do so. Mounting the projector on a ceiling requires special ceiling brackets (sold separately) and specialized knowledge. Improper mounting could cause the projector to fall, resulting in an accident.

Projection Distance and Screen Size

Use the figures, table, and formula below to determine the screen size and projection distance. (Screen sizes are approximate values for full-size picture and no keystone adjustment)

Screen

As seen from above

VOL.

ON/STANDBY

INPUT

VOL.

FAN TE MP LAMP ON

AUTO

KEYSTONE

AUTO SET

As seen from the side

Lens center

USB

COMPUTER

MONITOR

(

)

Y,P

B/PR

CONTROL

VIDEO

S-VIDEOVIDEO

R - AUDIO - L

AUDIO

a is the distance (m) between the lens and the screen, and corresponds to a range of

1.50 m to 11.74 m.

a (min length) =

a (max length) =

screen

size (cm)

32 (81) — 1.50 40 (102) 1.50 1.91 60 (152) 2.29 2.91

80 (203) 3.08 3.90 100 (254) 3.87 4.89 150 (381) 5.84 7.37 200 (508) 7.80 9.86 250 (635) 9.77 — 300 (762) 11.74 —

2120

projection size (inches) – 1.7971

25.395

projection size (inches) – 1.4258

20.148

projection distance a(m)

min length max length

(zooming max) (zooming min)

Preparations

Connection How to use the PC card slot

Before connection

• Read the owner’s manual of the device to be connected to the projector.

• Some types of computer cannot be used connected to this projector.

Check for an RGB output terminal, supported signal

• Turn off the power of both devices before connection.

• The figure below is a sample connection. This does not mean that all of these devices

can or must be connected simultaneously. (Dotted lines mean items can be exchanged.)

Computer Desktop computer

To audio output

To USB terminal

p.52

USB cable

Audio cable (for computer) (supplied)

To RGB output

USB

MONITOR

CONTROL

RGB cable

(supplied)

COMPUTER

)

(

B/PR

Y/P

p.69

, etc.

To audio output

Monitor cable Mini D-sub 15P-BNC (not supplied)

Audio cable (not supplied)

To RGB output

Please read this chapter if the model you purchased includes a PC card slot.

The wireless LAN PC card enables you to connect the projector wirelessly with a personal computer that supports IEEE802.11b based wireless LAN.

p.33

(Please note that communication between all the computers based on IEEE802.11b and this projector is not guaranteed.) You can also use a commercially available memory card to project

p.41

JPEG image files using this projector.

Please follow the steps below when removing

or mounting a PC card.

■ Mounting a PC card

q Remove the PC card slot cover.

Press lightly on the circle (“O”) while sliding the cover in the direction of the arrow.

Card slot cover

w Insert the PC card.

■ Removing a PC card

q Look at CARD indicator.

If it is off, proceed to step r.

UNMOUNT button

CARD indicator

w Press the UNMOUNT button.

Begins processing for PC card removal

After making sure of the card orientation, press it in firmly until it stops.

e Wait until CARD indicator goes

out.

Never remove the PC card while lit. Doing so could damage the PC card or corrupt your data.

Preparations

VIDEO

VCR

S-VIDEOVIDEO

AV cable (supplied)

To S-Video output

S-Video cable (not supplied)

To audio output White (L) Red (R)

DVD player

To Y/CB/CR output Green (Y) Blue (C Red (C

Conversion adapter BNC-pin (not supplied)

To RS-232C terminal

Computer (for control)

Control cable

p.71

R - AUDIO - L

AUDIO

Yellow (to video output)

To audio output White (L) Red (R)

Notes

• COMPUTER terminals 1 and 2 function identically.

• The AUDIO terminal doubles for devices connected to COMPUTER terminals 1 and 2.

r Press the Eject button.

PC Card

B),

e Replace the PC card slot cover.

Replace the PC card slot cover to keep dust from entering.

The Eject button is a bit stiff, so press firmly while supporting the projector. Be careful to avoid injury when doing so.

■ If CARD indicator turns red

CARD indicator

Press the RESET switch with a thin pin or similar implement (it is at the bottom of a recess).

Eject button

RESET switch

2322

+ 25 hidden pages