Toshiba TLP651A, TLP651U, TLP650U, TLP470U, TLP450U User Manual

Before use

OWNER’S MANUAL

3LCD DATA PROJECTOR

TLP450U

CONTENTS

1

TLP451U
TLP650U
TLP651U
TLP650A
TLP651A
TLP470U
TLP471U
TLP670U
TLP671U

(

WITH DOCUMENT IMAGING CAMERA

(

WITH DOCUMENT IMAGING CAMERA

(

WITH DOCUMENT IMAGING CAMERA

(

WITH DOCUMENT IMAGING CAMERA

(

WITH DOCUMENT IMAGING CAMERA

)

)

)

)

)

Before use

SAFETY PRECAUTIONS

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS

FCC Radio Frequency Interference Statement
Note: This equipment has been tested and found to comply with the limits for a Class A

The lightning flash with arrowhead
symbol, within an equilateral triangle,
is intended to alert the user to the
presence of uninsulated “dangerous
voltage” within the product’s
enclosure that may be of sufficient
magnitude to constitute a risk of
electric shock to persons.

The exclamation point within an
equilateral triangle is intended to
alert the user to the presence of
important operating and
maintenance (servicing) instructions
in the literature accompanying the
appliance.

WARNING: Changes or modifications made to this equipment, not expressly approved by

Notice: This Class A digital apparatus complies with Canadian ICES-003.

CONTENTS

APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE
PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE CABINET. REFER
SERVICING TO QUALIFIED PERSONNEL ONLY.

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiates radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications .
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his
own expense.

Toshiba, or parties authorized by Toshiba, could void the user’s authority to operate
the equipment.

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du
Canada.

2

CAUTION: Laser beam is emitted when the laser button of the remote control is pressed. Do not

look from the front of the remote control. Do not face toward a person or to a mirror.

Before use

CONTENTS

3

IMPORTANT PRECAUTIONS

Save Original Packing Materials

The original shipping carton and packing materials will come in
handy if you ever have to ship your LCD projector. For maximum
protection, repack the set as it was originally packed at the factory.

Av oid V olatile Liquid

Do not use volatile liquids, such as an insect spray, near the unit.
Do not leave rubber or plastic products touching the unit for a long
time. They will mar the finish.

Moisture Condensation

Never operate this unit immediately after moving it from a cold
location to a warm location. When the unit is exposed to such a
change in temperature, moisture may condense on the crucial
internal parts. To prevent the unit from possible damage, do not use
the unit for at least 2 hours when there is an extreme or sudden
change in temperature.

In the spaces provided below, record the Model and Serial No. located
at the rear of your LCD projector.

Model No.

Retain this information for future reference.

Serial No.

Before use

IMPORTANT SAFETY INSTRUCTIONS

CONTENTS

4

CAUTION: PLEASE READ AND OBSERVE

ALL W ARNINGS AND
INSTRUCTIONS GIVEN IN THIS
OWNER’S MANUAL AND THOSE
MARKED ON THE UNIT. RETAIN
THIS BOOKLET FOR FUTURE
REFERENCE.

This set has been designed and manufactured
to assure personal safety. Improper use can
result in electric shock or fire hazard. The
safeguards incorporated in this unit will protect
you if you observe the following procedures for
installation, use and servicing. This unit is fully
transistorized and does not contain any parts
that can be repaired by the user.

DO NOT REMOVE THE CABINET COVER, OR
YOU MAY BE EXPOSED TO DANGEROUS
VOLTAGE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL ONLY.

1. Read Owner’s Manual

After unpacking this product, read the
owner’s manual carefully, and follow all the
operating and other instructions.

2. Power Sources

This product should be operated only from
the type of power source indicated on the
marking label. If you are not sure of the type
of power supply to your home, consult your
product dealer or local power company.
For products intended to operate from
battery power, or other sources, refer to the
operating instructions.

3. Source of Light

Do not look into the lens while the lamp is
on. The strong light from the lamp may
cause damage to your eyes or sight.

4. Ventilation

Openings in the cabinet are provided for
ventilation and to ensure reliable operation
of the product and to protect it from
overheating, and these openings must not
be blocked or covered. The openings
should never be blocked by placing the
product on a bed, sofa, rug or other similar
surface. This product should not be placed
in a built-in installation such as a bookcase
or rack unless proper ventilation is provided
or the manufacturer’s instructions have
been adhered to.

Before use

IMPORTANT SAFETY INSTRUCTIONS

CONTENTS

5

5. Heat

The product should be situated away from
heat sources such as radiators, heat
registers, stoves, or other products
(including amplifiers) that produce heat.

6. Water and Moisture

Do not use this product near water – for
example, near a bath tub, wash bowl,
kitchen sink, or laundry tub; in a wet
basement; or near a swimming pool and the
like.

7. Cleaning

Unplug this product from the wall outlet
before cleaning. Do not use liquid cleaners
or aerosol cleaners. Use a damp cloth for
cleaning.

8. Power-Cord Protection

Power-supply cords should be routed so
that they are not likely to be walked on or
pinched by items placed upon or against
them, paying particular attention to cords at
plugs, convenience receptacles, and the
point where they exit from the product.

9. Overloading

Do not overload wall outlets; extension
cords, or integral convenience receptacles
as this can result in a risk of fire or electric
shock.

10. Lightning

For added protection for this product during
storm, or when it is left unattended and
unused for long periods of time, unplug it
from the wall outlet.
This will prevent damage to the product due
to lightning and power-line surges.

Before use

IMPORTANT SAFETY INSTRUCTIONS

CONTENTS

6

11. Object and Liquid Entry

Never push objects of any kind into this
product through openings as they may
touch dangerous voltage points or short-out
parts that could result in a fire or electric
shock. Never spill liquid of any kind on the
product.

12. Do not place the product vertically

Do not use the product in the upright
position to project the pictures at the
ceiling, or any other vertical positions.
It may fall down and dangerous.

13. Stack Inhibited

Do not stack other equipment on this
product or do not place this product on the
other equipment.
Top and bottom plates of this product
develops heat and may give some
undesirable damage to other unit.

14. Attachments

Do not use attachments not recommended
by the product manufacturer as they may
cause hazards.

15. Accessories

Do not place this product on an unstable
cart, stand, tripod, bracket, or table. The
product may fall, causing serious injury to a
child or adult, and serious damage to the
product. Use only with a cart, stand, tripod,
bracket, or table recommended by the
manufacturer, or sold with the product. Any
mounting of the product should follow the
manufacturer’s instructions, and should use
a mounting accessory recommended by the
manufacturer.
A product and cart combination should be
moved with care. Quick stops, excessive
force, and uneven surfaces may cause the
product and cart combination to overturn.

S3125A

Before use

IMPORTANT SAFETY INSTRUCTIONS

CONTENTS

7

16. Damage Requiring Service

Unplug this product from the wall outlet and
refer servicing to qualified service
personnel under the following conditions:

a) When the power-supply cord or plug is

damaged.

b) If liquid has been spilled, or objects have

fallen into the product.

c) If the product has been exposed to rain or

water.

d) If the product does not operate normally by

following the operating instructions. Adjust
only those controls that are covered by the
operating instructions as an improper
adjustment of other controls may result in
damage and will often require extensive
work by a qualified technician to restore the
product to its normal operation.

e) If the product has been dropped or

damaged in any way.

f) When the product exhibits a distinct change

in performance – this indicates a need for
service.

17. Servicing

Do not attempt to service this product
yourself as opening or removing covers
may expose you to dangerous voltage or
other hazards. Refer all servicing to
qualified service personnel.

18. Replacement Parts

When replacement parts are required, be
sure the service technician has used
replacement parts specified by the
manufacturer or have the same
characteristics as the original part.
Unauthorized substitutions may result in
fire, electric shock, or other hazards.
(Replacement of the lamp only should be
made by users.)

19. Safety Check

Upon completion of any service or repairs
to this product, ask the service technician to
perform safety checks to determine that the
product is in proper operating condition.

20. Do not get your hands between the
camera arm and the main unit when
setting the camera arm back in its
original position.

To avoid injury, be careful not to get your
hands caught when setting the camera arm
back in its original position. Families with
children should be particularly careful.

Before use

IMPORTANT SAFETY INSTRUCTIONS

CONTENTS

8

21. Do not carry by the camera arm.

Do not carry the projector by the camera
arm.
Doing so can result in damage or injury.

22. Do not leave documents on the unit for
long periods of time while using the
document imaging function.

Do not leave texts, papers or other
documents for projection on the unit for
long periods of time. The heat could erase
the letters on a thermal paper.

23. Do not move the projector while the arm
is still erect.

Always store the arm back in position when
moving the projector. Otherwise injury or
damage may result.

24. Do not look into the arm light while it is lit.

The strong light may cause damage to your
eyes or sight.

25. If glass components, including lens and
lamp, should break, contact your dealer
for repair service.

This product incorporates glass
components, including a lens and a lamp. If
such parts should break, please handle
with care to avoid injury and contact your
dealer for repair service. The broken pieces
of glass may cause to injury.

Before use

Power supply cord
selection

If your line voltage is 220 to 240, use one of the
following types of cable.

Plug
configuration

Plug type

Line voltage

CONTENTS

9

EURO
240V
10 – 15A

UK
240V
6A

Australian
240V
10A

North American
240V
15A

Switzerland
240V
6A

220 – 240V

200 – 240V

200 – 240V

200 – 240V

200 – 240V

Before use

Contents

CONTENTS

10

Before use

SAFETY PRECAUTIONS ............................................................... 2

IMPORTANT PRECAUTIONS ....................................................... 3

IMPORTANT SAFETY INSTRUCTIONS ..................................... 4

Power supply cord selection ............................................................. 9

Part names and functions .............................................................. 11

Connections and installation

Connections .................................................................................... 16

Projector placement........................................................................ 18

Operations

Picture projection ........................................................................... 21

Operating the computer by the remote control.............................. 25

Adjustments

Camera

Part names and functions of document imaging camera ............. 35

Picture projection with the document imaging camera ................ 37

Overlaying projection ..................................................................... 39

Maintenance

Trouble indications......................................................................... 40

Air filter, lens and main unit cleaning........................................... 41

Lamp replacement .......................................................................... 42

Others

Before calling service personnel .................................................... 43

Input signal..................................................................................... 45

Adjustments with RS-232C ............................................................ 49

Specifications.................................................................................. 51

LIMITED WARRANTY ................................................................. 53

Setting and adjustments on the menu............................................ 27

Initial settings – Default................................................................. 28

Keystone correction – Keystone ..................................................... 30

Projection adjustments – Image..................................................... 31

Picture adjustments – Picture ........................................................ 32

Sound adjustments – Audio............................................................ 33

Saving data – Save.......................................................................... 34

Before use

CONTENTS

11

Part names and functions

Main unit

Lens cover

Projection lens

Exhaust holes

Control panel

SELECT/ADJUST

ON/STANDBY MENU ENTER

5 8761 32 4

Zooming ring

Focusing ring

INPUT

21

21

ON

LAMP

TEMP

ON/STANDBY button

1

To turn the projector on or off.

MENU button

2

To display or close the menu.

SELECT/ADJUST button

3

27

21

28

( / / / )

To select items or adjust values on the
menu.

ENTER button

4

To enter your selection on the menu.

INPUT button

5

To select the input source.

ON indicator

6

LAMP indicator

7

TEMP indicator

8

30

21

21 40

21 40

40

Foot adjuster
release button

Foot adjuster

20

20

Intake holes

Infrared remote sensor

(Continued)

Before use

(Continued)

Left side Right side

CONTENTS

1 2 3 4

12

AC IN socket

Rear side

19

Speaker

Carrying handle
Open to carry the projetor.

Infrared remote sensor

Intake holes

CONTROL connector

1

RS-232C

CONTROL

17 49

RGB AUDIO

MONITOR OUTPUT

VIDEO INPUT

S-VIDEO VIDEO

To connect a computer to control the projector.

MONITOR OUTPUT connectors

2

(RGB output, AUDIO output)

17

To connect to a monitor or audio equipment.

RGB INPUT connectors (RGB input, AUDIO input)

3

To connect a computer, etc.

VIDEO INPUT connectors

4

(S-VIDEO input, VIDEO input, AUDIO input)

To connect a video equipment, etc.

RGB

17

RGB INPUT

L - AUDIO -R

AUDIO

16

Document imaging camera model

(Continued)

Before use

CONTENTS

13

(Continued)

Remote control

Caution - use of controls or adjustments or

performance of procedures other than those
specified herein may result in hazardous
radiation exposure.

Laser emission part

1
2

AUTO SET

MARKER

POINTER
PJ

KEYSTONE

ON/STANDBY

LASER

3
4

R-CLICKL-CLICK

5
6

7

MENU ENTER

VIDEO CAMERARGB

RESET

FREEZERESIZE

MUTE CALL

8

9

10

11
12

13
14

15
16
17

Location of the labels

AUTO SET

ON/STANDBY

KEYSTONE

MARKER

LASER

POINTER
PJ

R-CLICKL-CLICK

MENU ENTER

VIDEO CAMERARGB

RESET FREEZERESIZE

REAR

RADIATION IS EMITTED
FROM THIS APERTURE

COMPLIES WITH DHHS 21 CFR SUBCHAPTER J
TOSHIBA AMERICA CONSUMER PRODUCTS, INC.

82 TOTOWA RD.,
WAYNE, NJ 07470,
U.S.A
REMOTE CONTROL
MODEL CT-90009

* Functions when the POINTER/PJ selector is

set to “POINTER”.

AVOID EXPOSURE

AUTO SET button

1

23

To adjust the image automaticcally.

KEYSTONE button

2

22

To correct the keystone distortion of the
picture automatically.

MARKER button

3

To display a marker on the screen.
Each time the button is pressed, the
marker changes the shape, and finally
disappears.

MADE IN JAPAN

CAUTION

LASER RADIATION
DO NOT STARE INTO BEAM

WAVE LENGTH: 650nm
MAX OUTPUT: 1mW
CLASS II LASER PRODUCT

MANUFACTURED:
SEPTEMBER 1999
PLACE OF

MANUFACTURER: A

POINTER/PJ selector

4

To switch the operation modes of the
remote control.
POINTER: To operate a computer. (The
supplied REMOTE MOUSE RECEIVER
should be connected to the computer.)
PJ: To operate the projector.

5

Pointer control*

• To select items or adjust values on the
menu.

• To shift a picture after changing its size
with the RESIZE button.

• To move the marker displayed with the
MARKER button.

• To move the pointer of the computer.*

• To substitute for the L-CLICK button by

pressing the center.*

-LASER

LASER RADIATION
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT

LASER–STRAHLUNG
NICHT IN DEN STRAHL BLICKEN
LASER KLASSE 2 PRODUKT

RAYONNEMENT LASER
NE PAS REGARDER DANS LE FAISCEAU
APPAREIL A LASER DE CLASSE 2

WAVE LENGTH (WELLENLÄNGE,
LONGUEUR D'ONDE): 650nm
MAX OUTPUT

(MAX AUSGANGSLEISTUNG,

PUISSANCE MAXIMA): 1mW

IEC60825–1 A1;1997

26

, , (–), (+) button

26

/

28

(Continued)

Before use

1
2

3

AUTO SET

MARKER

POINTER
PJ

KEYSTONE

Laser emission part

ON/STANDBY

LASER

9

10

(Continued)

L-CLICK button* 26 / MENU button

6

• To left-click.*

• To display or close the menu.

RGB button

7

To select the RGB input.

RESIZE button

8

To change the picture size.

ON/STANDBY button

9

To turn the projector on or off.

21

24

21

28

CONTENTS

MUTE button

16

To cut off the picture and sound
temporarily.

CALL button

17

To display the current input source and
signal status information.

23

23

Installing batteries

1) Open the cover.

14

4
5

6
7

8

R-CLICKL-CLICK

MENU ENTER

VIDEO CAMERARGB

RESET

FREEZERESIZE

MUTE CALL

11
12

13
14

15
16
17

LASER button

10

To display the laser pointer by pointing the
laser emission part toward the screen.

R-CLICK button* 26 / ENTER button

11

• To right-click.*

• To enter your selection on the menu.

VIDEO button

12

To select the video input.

CAMERA button (for document imaging

13

camera model only)

To select the camera input.

RESET button

14

To restore the settings and adjustments to
the default.

FREEZE button

15

To freeze the picture.

21

37

29

23

28

2) Install the batteries.

Make sure that the +/– polarities match the
illustration in the compartment.

3) Attach the cover.

(Continued)

Before use

(Continued)

Notes

Using batteries incorrectly can cause them to
leak or burst. Strictly observe the following.

• Install the batteries with their + and – ends
facing correctly.

• Do not charge, heat, disassemble, or short
the batteries or throw them into a fire.

• Do not leave exhausted batteries in the
remote control.

• Do not mix different types of batteries or new
and old batteries.

• When you will not be using the remote control
for a prolonged period, take the batteries out
of the remote control.

• When the remote control stops working or
only works from very close distance, replace
all the batteries with new ones.

• When replacing the batteries, use a more
longer life alkaline batteries.

• If a battery leaks, carefully wipe off any
residue inside the battery case before loading
new batteries.

Remote control operation

Point the remote control at the infrared
remote sensor and press a button.

Front side

15°

15°

Rear side (document imaging camera model)

Rear side

15°

15°

15°

15°

CONTENTS

15

Notes

• Do not leave the remote control unit turned
the face down as it may make the buttons
pressed to hasten the battery end.

• The remote control may not operate when
there is sunlight or other strong light such as
a fluorescent lamp shining on the remote
sensor.

• Operate the remote control from a position
where the remote sensor is visible.

• Do not drop the remote control or otherwise
jolt it.

• Keep the remote control out of locations with
excessively high temperature or humidity.

• Do not get water on the remote control or
place wet objects on it.

• Do not disassemble the remote control.

• Under unusual circumstances the remote

control may not operate well due to the
location being used or the surroundings.
At such times, change the direction of the
remote control to the projector and retry the
operation.

Distance : within about 5 meters from the front

of the remote sensor.

Angle : within about 15° of the remote

sensor in ev ery direction.

Connections and installation

Connections

CONTENTS

16

Connecting an IBM PC or compatible computer (DOS/V)

Check that the power for the projector and computer is off before
connecting the cables.

Connect when you

Laptop
computers

Desktop
computers

or

To
monitor
port

To
audio
output port

Notes

• The projector cannot be connected to a computer that does not have
an analog RGB output terminal. For details, refer to the computer
manual.

• You may not be able to connect some computers to the projector. For
details, consult the dealer.

• If NTSC/PAL/SECAM signals are input to the RGB INPUT connector,
they cannot be displayed. (Input NTSC/PAL/SECAM signals to the
VIDEO INPUT jack.)

want to view a picture
on the computer monitor.

To

Computer
monitor
cable

MONITOR
OUTPUT
(RGB)

RGB cable (supplied)

PC audio cable (supplied)

RS-232C

RGB AUDIO

MONITOR OUTPUT

CONTROL

VIDEO INPUT

S-VIDEO VIDEO

To RGB
INPUT (RGB)

RGB

RGB INPUT

AUDIO

L - AUDIO -R

To
RGB
INPUT
(AUDIO)

Connecting a Macintosh computer

• Attach the supplied adapter for Macintosh computers.

• Check that the power for the projector and computer is off before
connecting the cables.

Laptop
computers

Notes

• The projector cannot be connected to a computer that does not have

an analog RGB output terminal. For details, refer to the computer
manual.

• You may not be able to connect some computers to the projector. For

details, consult the dealer.

• The adapter for Macintosh computers is conformable to MULTIPLE

SCAN 21.

Desktop
computers

or

To monitor port

Adapter for Macintosh
computers (supplied)

To audio output port

PC audio cable (supplied)

RGB cable (supplied)

RS-232C
CONTROL

RGB AUDIO

MONITOR OUTPUT

VIDEO INPUT

S-VIDEO VIDEO

To
RGB
INPUT
(RGB)

RGB

AUDIO

RGB INPUT

L - AUDIO -R

To
RGB
INPUT
(AUDIO)

(Continued)

Connections and installation

(Continued)

CONTENTS

17

Connecting video equipment

Check that the power for the projector and computer is off before
connecting the cables.

To RGB
INPUT
(RGB)

RS-232C

RGB AUDIO
MONITOR OUTPUT

CONTROL

VIDEO INPUT

To VIDEO
INPUT
(S-VIDEO)

(not supplied)

Audio cable (not supplied)

To audio output R
(red)

To audio output L
(white)

To RGB
INPUT
(AUDIO)

RGB

AUDIO

RGB INPUT

Video player with color difference output

To VIDEO INPUT (VIDEO) (yellow)

S-VIDEO VIDEO

L - AUDIO -R

To VIDEO INPUT (AUDIO L) (white)
To VIDEO INPUT (AUDIO R) (red)

Audio/Video cable (supplied)

S-VIDEO cable (not supplied)

To S-VIDEO output

Video tape player

To CR(PR) output
To CB(PB) output

To Y output

To Video output (yellow)
To Audio output (white)
To Audio output (red)

Output terminals

Check that the power for the projector and computer is off before
connecting the cables.

RS-232C

RGB AUDIO

RGB

AUDIO

RGB INPUT

S-VIDEO VIDEO

L - AUDIO -R

You can connect an
extra monitor to view
the picture.

To MONITOR OUTPUT (AUDIO)
Ø3.5mm STEREO mini plug
(Audio output level is constant.)

To audio input

You can connect a computer
to control the projector.

49

Audio cable
(not supplied)

Connect a stereo system
for dynamic sound.

MONITOR OUTPUT

CONTROL

VIDEO INPUT

Note

Signal input to the S-VIDEO jack takes priority over that to the VIDEO
jack.

Notes

• Sound of the source which you select is output to the connected

stereo system, etc.

• The MONITOR OUTPUT (RGB output) connector always sends out a

signal which is input to the RGB INPUT (RGB input) connector
regardless of your source selection.

• Even while the projector is in standby mode, the MONITOR OUTPUT

(RGB output) connector continues its output.

Connections and installation

CONTENTS

18

Projector placement

There are four ways of installing this projector
as shown right. This section explains the
standard case of the floor-mounted front
projection.

CAUTION

• When a ceiling mount is required, please
consult with the dealer.

• When carrying the unit, always handle the
carrying handle.

Preparation

• Select a room that can be darkened.

• Refer to the table on the next page
the screen size and required distance.

19

for

Floor-mounted front projection

Viewing a picture projected on the front of
the screen from a floor.

Viewer

Ceiling-mounted front projection

(The document imaging camera model
could not be mounted on the ceiling.)

Viewing a picture projected on the front of
the screen from a ceiling installation.

Floor-mounted rear projection

Viewing a picture projected through the
back of the screen from a floor installation.

Translucent screen

Viewer

Ceiling-mounted rear projection

(The document imaging camera model
could not be mounted on the ceiling.)

Viewing a picture projected through the
back of the screen from a ceiling
installation.

Translucent screen

Viewer

• When installed the projector in the way except the floor-mounted front projection, make the
setting of the projecting orientation on the menu.

28

Viewer

(Continued)

Connections and installation

CONTENTS

19

(Continued)

Place the projector on a steady,

1

level surface such as a table.

Point the projector squarely at the screen
for the best possible picture.

Top view

Screen

90°

Point the lens straight at the center of the
screen as above.

Side view

Screen

90°

Place the projector horizontally so that the
projecting light hits the screen squarely.

Adjust the distance between

2

the lens and the screen.

The projection size depends on the
distance between the lens and the
screen.

Adjust the projection size by changing the
distances as shown below.

Screen

Lens

90°

b

a

a: Distance between the lens and the screen
b: Distance between the lens height and the

bottom of projection area

a (m)

Screen size

(inches)

23
40
60

80
100
150
200
250

• The values are approximations.

Minimum

(WIDE)

–

1.56

2.373

3.186

3.999

6.031

8.064

10.096

Maximum

(TELE)

1.132

2.017

3.059

4.1

5.142

7.746

10.35

–

b (cm)

4
6

9
12
15
23
30
38

Connect the power cord.

3

• Insert one end in the AC IN socket on
the projector.

• Insert the other end in a wall outlet.

To a wall outlet.

The ON indicator lights in orange and the
projector turns to standby mode.

Take off the lens cover.

4

(Continued)

Connections and installation

(Continued)

Notes

• When the projector is moved from a cold
location to a warm location, or when the
ambient temperature in the projection room
has risen suddenly, moisture may condense
on the lens or the mirror to blur the projected
pictures. In such a case, leave the projector
for an adequate time (1 to 2 hours, depending
on the room’s condition) before using it so it
adjusts to the ambient temperature.

• If the screen is exposed to direct sunlight or
other strong light, the projected picture
becomes too faint to see. Shut out the light
with curtains or other means.

• If the screen and the projector are not
installed properly, the projected picture may
be distorted.

• If the projector is tilted, the picture may be
distorted. To obtain the best possible picture,
place the projector so it faces the screen
squarely.

How to use the foot adjuster

The tilt of the projector can be adjusted using
the foot adjuster.

1) Lift the front of the projector until a tilt
angle desired is obtained and hold down
the foot adjuster release button.

The foot adjuster will stretch.
Release the button to lock in position.

Foot adjuster
release button

Foot adjuster

2) Turn the foot adjuster to make fine
adjustment of the height.

Turn clockwise to lift up.
Turn counterclockwise to lower.

CONTENTS

20

3) To put the foot adjuster back, hold down
the foot adjuster release button and
lower the front slowly.

The foot adjuster will put back.

Note

Be sure to hold the projector when putting the
foot adjuster back so as not to let the front fall
on your fingers.

Lift up Lower

Operations

Picture projection

CAUTION

Do not look into the projection lens while
operating the projector.

Preparation

• Install and connect the projector properly.

• Take off the lens cover.

• Set the POINTER/PJ to “PJ”.

ON/STANDBY MENU ENTER

SELECT/ADJUST

1

INPUT

Indicators

3

ON

LAMP

TEMP

AUTO SET

ON/STANDBY

KEYSTONE

MARKER

POINTER
PJ

MENU ENTER

VIDEO CAMERARGB

RESET FREEZERESIZE

Press ON/STANDBY.

1

LASER

R-CLICKL-CLICK

1

3

Both the ON and LAMP indicators light up
in green.

ON

On (Green)

LAMP

Flashing (Green)

ON

On (Green)

LAMP

On (Green)

CONTENTS

Select the input source.

3

(On the remote control)
Press RGB or VIDEO.

(On the control panel of the main unit)
Press INPUT repeatedly.
Each time the button is pressed, the

source indication on the screen changes
as follows:

→

RGB: T o project pictures from a

→→

computer connected to RGB
INPUT.

Video: To project pictures from a

video player connected to
VIDEO INPUT.

Camera: To project pictures from a

document imaging camera.
(For document imaging
camera model only)

Adjust the picture size by

4

turning the zooming ring.

Turn to the right to enlarge the picture.
Turn to the left to reduce the picture.

21

5 4

Turn on the connected

2

equipment and put it in
playback mode.

Focus on the picture by

5

turning the focusing ring.

A still picture is recommended for
focusing.

(Continued)

Operations

(Continued)

Notes

•“

” is displayed on the screen if the

projector does not receive any signal from the
connected equipment. Put the equipment in
playback mode.

• Due to the lamp characteristic, flickers may
occasionally occur in a picture. This is not
malfunction of the unit.

• When an RGB source is selected and no
signal is sent from the computer for about 30
minutes, the projector turns to standby mode
for power saving. It automatically turns on
when the signal resumes. Pressing
ON/STANDBY also turns it on.

• While operating the projector, “

” may be
displayed on the screen. This means that the
operation cannot be completed.

ON/STANDBY MENU ENTER

SELECT/ADJUST

AUTO SET

KEYSTONE

MARKER

POINTER
PJ

MENU ENTER

VIDEO CAMERARGB

RESET FREEZERESIZE

ON/STANDBY

LASER

R-CLICKL-CLICK

ON

INPUT

LAMP

TEMP

IndicatorsON/STANDBY

ON/STANDBY
KEYSTONE

CONTENTS

22

Notes

• Even after turning the power off, the intake
and exhaust fans continue to work for a while
to cool the inside of the projector.

• Immediately after the power off, the projector
may not be turned on while the LAMP
indicator is flashing in green.

• Before unplugging the power cord, make sure
that the fans are stopped.

Correcting the keystone distortion

A picture may be expanded on the upper side if
projected upward from the projector lifted up by
the foot adjuster. The projector can correct this
keystone distortion automatically.

Press KEYSTONE.

The keystone distortion is corrected
automatically.

To correct further , mak e the “Keystone”
adjustment on the menu.

30

Turning the power off

1) Press ON/STANDBY after using the
projector.

An instruction message appears.

2) Press ON/STANDBY again.

The LAMP indicator turns off, and the
projector turns to standby mode. (The ON
idicator lights in orange.)

3) After confirming the exhaust fan stops,
unplug the power cord.

The ON indicator turns off.

(Continued)

Operations

[Status]
In

p

u

t:

RGB

Signal

:XGA

6

0

Sc r

ee

n:X

GA 6

0

Ver

/r

e

v

c

Synh

r

:

N/N

Current input source
Signal system of the input source
Signal system automatically detected
by the projector
(Mode determination )
Synchronizing polarity of input signal
P=Positive N=Negative
Version number of software

45

o

:

V

0

1

/

R

0

1

.

..

(Continued)

AUTO SET

AUTO SET

POINTER
PJ

MARKER

KEYSTONE

ON/STANDBY

LASER

2) Press MUTE again.

The picture is also cut off temporarily.
“

” appears.

To restore, press MUTE again.

Note

If you press MUTE while the menu is displayed,
the menu disappears.

CONTENTS

23

Contents of displayed items

R-CLICKL-CLICK

MENU ENTER

VIDEO CAMERARGB

RESET FREEZERESIZE

MUTE CALL

FREEZE
CALL

MUTE

Adjusting the image automatically

An image which is flickering, blurred or is not
centered, can be adjusted automatically.

Press AUTO SET.

The image is adjusted automatically.
To adjust further, make the “Image” adjustment

on the menu.

31

Cutting off the picture and sound
temporarily

1) Press MUTE.

The sound is cut off temporarily.

” appears.

“

Freezing the picture

Press FREEZE.

The picture freezes.

” mark appears on the screen.

“
To release the picture, press FREEZE again.
Any other operations can also release the

picture.

Note

This function is convenient for the case where
you are using the document imaging camera
model and change documents to project
through the camera.

Note

If you press CALL while the menu is displayed,
the menu disappears.

Displaying the input source
information

Press CALL.

The current input source and the signal status
information is display ed.

To close the display, press CALL again.

(Continued)

Operations

(Continued)

AUTO SET

ON/STANDBY

KEYSTONE

MARKER

POINTER
PJ

LASER

,, ,

R-CLICKL-CLICK

MENU ENTER

VIDEO CAMERARGB

RESET FREEZERESIZE

MUTE CALL

RESET
RESIZE

Changing the picture size

Pictures are projected at the maximal
projection size regardless of the signal types.
Optionally you can change the picture size to
through size or enlarge it.

Press RESIZE.

Each time the button is pressed, the picture
size changes from the center of the picture.

When the picture size is smaller than the
projection area:

: To move the picture upward
: To move the picture down
: To move the picture leftward
: To move the picture rightward

When the picture size is larger than the
projection area:

: To view the upper side of the picture
: To view the lower side of the picture
: To view the left side of the picture
: To view the right side of the picture

Notes

• Picture size returns to normal after the power

is turned off. The values are not saved.

• You may not change the picture size

depending to the signal.

• Pictures of VGA signals, etc. may be slightly

inferior in quality at the initial size because
they are enlarged.

• The picture returns to the normal position

when the RESET button is pressed after the
picture is moved.

• The picture may not be projected properly

while moving the picture.

CONTENTS

24

When the picture size does not correspond with
the projection area, the picture can be moved
by pressing

, , and .

Operations

If you connect the iREMOTE MOUSE

Operating the computer
by the remote control

RECEIVER to the computer, the supplied
remote control can work as a mouse of the
computer.

Connecting the REMOTE MOUSE RECEIVER

Check that the power of the computer is turned off.
Connect the REMOTE MOUSE RECEIVER.
Remove the mouse actually used and change it to the supplied cable.

USB Mouse cable
(supplied)

PV-98 IBM/Mac USB

IBM/MAC

Mouse cable

(supplied)

PS/2

Mouse adapter

(supplied)

USB
PORT

SERIAL
PORT

PS/2
MOUSE
PORT

IBM PC
DOS/V

CONTENTS

Notes

• To operate the projector and the computer by
the remote control, place the REMOTE
MOUSE RECEIVER close to the projector.

• When connecting the REMOTE MOUSE
RECEIVER to an IBM PC/DOS V computer,
use the supplied PS/2 mouse adapter if you
are using a PS/2 mouse, or connect the
supplied IBM/MAC cable directly to your
computer if you are using a serial mouse.

• When connecting the REMOTE MOUSE
RECEIVER to the USB PORT for the first
time, insert the “Windows98 CD-ROM” and
install the device drivers for a USB
interchangeability device and a USB human
interface devices (two kinds). The installation
starts automatically when you connect a USB
mouse cable connected to the remote mouse
receiver to the USB port of your computer.

25

REMOTE MOUSE RECEIVER
(supplied)

MAC

Mouse adapter

(supplied)

Macintosh

MAC
MOUSE
PORT

(Continued)

Operations

(Continued)

Operating the computer by the
remote control

Use the supplied remote control pointing it at
the connected REMOTE MOUSE RECEIVER.

AUTO SET

ON/STANDBY

KEYSTONE

MARKER

LASER

R-CLICKL-CLICK

MENU ENTER

VIDEO CAMERARGB

RESET FREEZERESIZE

Pointer control

R-CLICK
L-CLICK

POINTER/PJ
selector

POINTER
PJ

To drag and drop

While holding down the center of the pointer
control, press the rim and release the
center.

Notes

• The remote control operating range is about 5
meter from the front of the remote sensor.

• The remote control may not operate when
there is sunlight or other strong light such as
a fluorescent lamp shining on the remote
sensor.

CONTENTS

26

Preparation

Set the POINTER/PJ selector to “POINTER”.

To move the pointer

Press the pointer control.
The pointer moves to the pressed direction.

To left-click

Press L-CLICK.

To right-click

Press R-CLICK.

Adjustments

Settings and adjustments on
the menu

Most of adjustments and settings are made on
the menu.

To display the menu, press MENU.

H-position : To shift the image position

horizontally

V-position : To shift the image position

vertically.

Clock : To adjust the clock frequency.

CONTENTS

Bass : To adjust the bass of the sound

output.

Treble : To adjust the treble of the sound

output.

27

The followings are adjustments and settings on
the menu. For details, see page in

When using this projector for the first time, see
“Default”.

28

Keystone

Auto set : To correct the keystone distortion

automatically.

Adjust : To make the correction of keystone

distortion beyond the automatic
correction.

29

.

30

Picture

Contrast : To adjust the contrast.
Brightness : T o adjust the brightness.
Color : To adjust the color depth.
Tint : To adjust the tint.
Sharpness : T o adjust the sharpness.
R-level : To adjust the amount of red in the

picture.

G-level : To adjust the amount of green in

the picture.

B-level : To adjust the amount of blue in the

picture.

Camera gain

: To adjust the sensitivity of the

document imaging camera.
(For document imaging camera
model only)

Audio

32

33

Default

Language : To select the language for displays.
Proj. mode :To set the projecting orientation

according to the way of installation.

RGB input

Video signal

Scrn display

: To set the signal type of RGB

input.

: To set the signal type of video

input.

: To use or disable on-screen

displays.

Save

Save data : To save the adjustments and

settings on the menu.

All preset : To restore the adjustments and

setings on the menu to the factory
set.

28

34

Image

Auto sync. : To adjust the image automatically.
Phase : To adjust the phase.

31

Volume : To adjust the sound volume of the

speaker.

Adjustments

Initial settings
– Default

Make the basic settings for projecting.

Preparation

• Display the image as explained in “Picture
Projection”.

• Set the POINTER/PJ selector to “PJ”.

Press MENU to display the menu.

1

21

ON/STANDBY MENU ENTER

1,5

Keys t one

SELECT/ADJUST

AUTO SET

POINTER
PJ

Au t o s e t
Adjust

ON/STANDBY

KEYSTONE

MARKER

LASER

R-CLICKL-CLICK

MENU ENTER

VIDEO CAMERARGB

RESET FREEZERESIZE

–

INPUT

2-4

RESET

ON

LAMP

TEMP

+

Press or to select .

2

De f a u l t

Language
Pro j .mode
RGB i nput
Vi deo si gnal
Scrn displa

Press or to select a

3

Eng l i sh
Standard

RGB

Au t o
On

y

preferred item.
Press or to make the

4

setting.

To select another item, go back to step 3.
Language

Select a language for the menu or on­screen displays.

English: English
Français: French
Deutsch: German
Italiano : Italian
Español : Spanish
Português : Portuguese

: Japanese

CONTENTS

Proj. mode

Confirm your installation type on the
chart on page

Standard: Floor-mounted front

projection

Rear: Floor-mounted rear

projection

Ceiling: Ceiling-mounted front

projection

R. ceil.: Ceiling-mounted rear

projection

RGB input

To set the signal type of RGB input.
RGB: RGB signal

Y/Pb/Pr: Color difference (Component)

video signal from the DVD
video player, etc.

Video signal

To set the signal type of video input.
Auto:

NTSC M: NTSC M signal
NTSC443A: NTSC4.43A signal
NTSC J: NTSC J signal
NTSC N: NTSC N signal
NTSC443B: NTSC4.43B signal
PAL: PAL signal
PAL N: PAL N signal
SECAM: SECAM signal
PAL443: PAL4.43 signal
PAL M: PAL M signal

.

18

Automatic signal detection
works on video input. If it
does not properly, set the
signal type of the source
from the followings.

(Continued)

28

Adjustments

(Continued)

Scrn display

On: On-screen displays

(indications of input
selection, signal absent or
mute mode, etc.) appear.

Off: On-screen displays do

not appear.

Press MENU.

5

The menu disappears.

Notes

• These settings are stored until you turn the
power off.

• To store the settings even if the power is
turned off, follow the procedure of “Saving
data”.

• Pressing RESET will return the adjustment or
setting currently selected to default.

34

CONTENTS

29

Adjustments

Keystone correction
– Keystone

Preparation

• Display the image as explained in “Picture
Projection”.

• Set the POINTER/PJ selector to “PJ”.

21

Press MENU to display the

1

menu.
Press or to select .

2

Keys t one

Au t o s e t
Adjust

–

CONTENTS

Notes

• Pressing KEYSTONE on the remote control
can also correct the keystone distortion
automatically.

• These adjustments are stored until you turn
the power off.

• Pressing RESET will return the adjustment or
setting currently selected to default.

+

• Pictures may be slightly deteriorated by the
keystone correction.

22

30

ON/STANDBY MENU ENTER

1,7

SELECT/ADJUST

AUTO SET

KEYSTONE

MARKER

POINTER
PJ

MENU ENTER

VIDEO CAMERARGB

RESET

ON/STANDBY

LASER

R-CLICKL-CLICK

FREEZERESIZE

ON

INPUT

LAMP

TEMP

KEYSTONE

2,3,5,6

RESET

0 degrees setting for the automatic

Press to select “Auto set”.

3

Press ENTER.

4

The keystone distortion is corrected
automatically. For further correction,
follow the belo w steps.

Press .

5

4

Press or to correct the

6

distortion.

(–): To reduce the upper width.
(+): To reduce the lower width.

Press MENU.

7

The menu disappears.

keystone correction

Depending on the operating condition such as
vibration, the distortion may be beyond the
automatic keystone correction. The horizontal
condition setting (0 degrees setting) may be
disordered. In such a case, perform the
following 0 degrees setting to correct the
distortion.

1) Place the projector on a level surface.

2) On the menu, select “Auto set” in

“Keystone”.

3) Press RESET.

Notes

• Do not make the 0 degrees setting on an
inclined or unstable surface or in a shaky
place as it may not be performed properly.

• To store this setting even if the power is
turned off, follow the procedure of “Saving
data”.

34

Adjustments

Projection adjustments
– Image

Preparation

• Display the image as explained in “Picture
Projection”.

• Set the POINTER/PJ selector to “PJ”.

Press MENU to display the

1

menu.
Press or to select .

2

21

ON/STANDBY MENU ENTER

1,7

SELECT/ADJUST

AUTO SET

KEYSTONE

MARKER

POINTER
PJ

MENU ENTER

VIDEO CAMERARGB

RESIZE

RESET

ON/STANDBY

LASER

R-CLICKL-CLICK

FREEZE

ON

INPUT

LAMP

TEMP

AUTO SET

2,3,5,6

RESET

CONTENTS

31

Notes

• When performing the automatic projection
adjustment, use a bright and distinctly edged

Image

Au t o s yn
Pha se
H– pos i t i on
V– pos i t i on
Clock

c.

–
–
–
–

+
+
+
+

picture.

• Pressing AUTO SET on the remote control
can also adjust the image automatically.

23

• If you project an image from a computer with
an LCD screen while monitoring the image on
the computer, the image may not be projected
properly, depending on the computer model.
In this case, turn off the computer display, or
make the necessary picture adjustments on

Press to select “Auto sync.”

3

the projector. For details on controlling the
computer display, etc., refer to the computer’s
manual and description on the software for

Press ENTER.

4

The image is automatically adjusted.
For further adjustments, follow the below
steps.

the computer used.

• During adjustments of “H-position” or “V-
position”, the image may not be projected
properly.

• While using, an aberration of the phase may
occur. In that case, adjust “Phase” again.

4

Press or to select a

5

preferred item.

• Some item may be displayed in gray
depending on an input source. The item
displayed in gray cannot be adjusted and/or

Press or to adjust the

6

item.

To select another item, go back to step 5.

Phase: To reduce flickers.
H-position: To shift the image to the

left (–), to the right (+).

V-position:

To shift the image down (–),

set.

• These adjustments are stored until you turn
the power off.

• To store the adjustments even if the power is
turned off, follow the procedure of “Saving
data”.

34

• Pressing RESET will return the adjustment or
setting currently selected to default.

to up (+).

Clock To remove vertical stripes.

Press MENU.

7

The menu disappears.

Adjustments

Picture adjustments
– Picture

Preparation

• Display the image as explained in “Picture
Projection”.

• Set the POINTER/PJ selector to “PJ”.

Press MENU to display the

1

menu.
Press or to select .

2

21

ON/STANDBY MENU ENTER

1,5

Picture

SELECT/ADJUST

AUTO SET

KEYSTONE

MARKER

POINTER
PJ

MENU ENTER

Con t r a s t
Brightness
Color

ON/STANDBY

LASER

R-CLICKL-CLICK

VIDEO CAMERARGB

RESET FREEZERESIZE

–
–
–

INPUT

2-4

RESET

ON

LAMP

TEMP

+
+
+

Tint

Sharpness
R- level
G- leve l

B- level
Camera gain

Press or to select a

3

–
–
–
–
–
–

+
+
+
+
+
+

preferred item.
Press or to adjust the item.

4

To select another item, go back to step 3.

– :
Contrast : (–) Lower

Brightness

Color: (–) Duller

Tint: (–) Redder

Sharpness: (–) Softer

R-level: (–) To reduce red

G-level: (–) To reduce green

B-level: (–) To reduce blue

+ :

(+) Higher

:(–) Darker

(+) Brighter

(+) Brighter

(+) Greener

(+) Sharper

(+) To increase red

(+) To increase green

(+) To increase blue

CONTENTS

32

Camera gain: (For document imaging
camera model only)

(–) To lower the camera
sensitivity when the
subject is too bright.
(+) To raise the camera
sensitivity when the
subject is too dark.

Press MENU.

5

The menu disappears.

Notes

• The adjustment can be stored on each input
source (RGB, Video, Camera).

• Some item may be displayed in gray
depending on an input source. The item
displayed in gray cannot be adjusted and/or
set.

• These adjustments are stored until you turn
the power off.

• To store the adjustments even if the power is
turned off, follow the procedure of “Saving
data”.

34

• Pressing RESET will return the adjustment or
setting currently selected to default.

Adjustments

Sound adjustments
– Audio

Preparation

• Display the image as explained in “Picture
Projection”.

• Set the POINTER/PJ selector to “PJ”.

21

Press MENU to display the

1

menu.
Press or to select .

2

Aud i o

Volume
Bass

Treble

–
–
–

CONTENTS

33

Notes

• These adjustments are stored until you turn
the power off.

• To store the adjustments even if the power is
turned off, follow the procedure of “Saving
data”.

34

• Pressing RESET will return the adjustment or

+
+
+

setting currently selected to default.

ON/STANDBY MENU ENTER

1,5

SELECT/ADJUST

AUTO SET

KEYSTONE

MARKER

POINTER
PJ

MENU ENTER

VIDEO CAMERARGB

RESET

ON/STANDBY

LASER

R-CLICKL-CLICK

FREEZERESIZE

INPUT

2-4

RESET

LAMP

TEMP

ON

Press or to select a

3

preferred item.
Press or to adjust the

4

item.

To select another item, go back to step 3.

– : + :
Volume : (–) T o turn down.

(+) To turn up.

Bass: (–) To reduce the bass.

(+) To increase the bass.

Treble: (–) To reduce the treble.

(+) To increase the treble.

Press MENU.

5

The menu disappears.

Adjustments

Saving data
– Save

Preparation

• Display the image as explained in “Picture
Projection”.

• Set the POINTER/PJ selector to “PJ”.

21

Press MENU to display the

1

menu.
Press or to select .

2

Sa ve

Save dat
Al l preset

a

CONTENTS

34

ON/STANDBY MENU ENTER

1,5

SELECT/ADJUST

AUTO SET

KEYSTONE

MARKER

POINTER
PJ

L-CLICK

MENU

RESIZE

VIDEO CAMERARGB

RESET

ON/STANDBY

LASER

R-CLICK

ENTER

FREEZE

INPUT

LAMP

TEMP

2,3

ON

Press or to select a

3

preferred item.

Save data : To save the adjustments

and settings on the menu.

All preset : To restore the adjustments

4

Press ENTER.

4

Press MENU.

5

The menu disappears.

and settings on the menu
to the factory set.

Camera

CONTENTS

35

Part names and functions of
document imaging camera

CAUTION

• When using the camera, be careful to not

pinch your hand or fingers into the arm.

• Do not look into the projection lens while

operating the projector.

On the document imaging camera model, you
can project pictures using the document
imaging camera.
The document imaging camera can directly
project any materials (documents, illustrations,
etc.) without using an OHP film.

Camera control panel

1 2 3

OVERLAY PHOTO/TEXT ARM LIGHT

LOCK W.BALANCE CAMERA

4 5 6

Camera head

Focusing ring
Camera lens

38

OVERLAY button

1

To activate the overlaying projection.

PHOTO/TEXT button

2

To switch modes between text and photo.

ARM LIGHT button

3

To turn on or off the light.

LOCK (W.BALANCE) indicator

4

Lights when the white balance is locked.

W.BALANCE button

5

To switch white balance settings between
automatic adjustment and lock.

CAMERA button

6

To select the camera source.
Press again to return to the previous input
source.

39

38

37

38

37

38

Arm

Light

(Continued)

Camera

(Continued)

Preparation of the document imaging
camera

1) Raise up the arm.

3) Turn the arm.

6) Pull up the light.

CONTENTS

36

2) Stretch the arm.

4) Open the camera head.

5) Turn the camera head.

7) Turn the light.

Notes

• Never give shocks or impacts to the camera
or arm as this may cause breakdowns.

• While raising up the arm in step 2), be careful
not to hit your face or your body.

Camera

CONTENTS

37

Picture projection with the
document imaging camera

Preparation

Display the image as explained in “Picture
Projection” .

21

OVERLAY PHOTO/TEXT ARM LIGHT

LOCK W.BALANCE CAMERA

ON/STANDBY MENU ENTER

SELECT/ADJUST

AUTO SET

KEYSTONE

MARKER

POINTER
PJ

ON/STANDBY

LASER

INPUT

LAMP

TEMP

1
3

6

ON

3

Place a document (text,

2

illustration) onto or around the
projector, and turn the camera
head to direction of the
document.

LCD PROJECTOR

LCD PROJECTOR

You can project around the projector by
moving the arm and the camera head.

LCD PROJECTOR

LCD

PROJECTOR

Press CAMERA to select the

3

camera input mode.

Pressing CAMERA on the camera control
panel or INPUT on the main unit can also
select it.

“Camera” is displayed.

Move the camera head to

4

adjust the size of the picture.

Up : To reduce.

Down : To enlarge.

MENU ENTER

Press ARM LIGHT.

1

The light turns on.

R-CLICKL-CLICK

VIDEO CAMERARGB

RESET FREEZERESIZE

3

(Continued)

Camera

(Continued)

Focus on the picture by

5

turning the focusing ring on
the camera head.

Focusing ring
N: Near
F: Far

Press PHOTO/TEXT to select

6

the mode of the document.

PHOTO:
TEXT:

When finished, turn off the

7

AB

when using a photograph.
when using a text.

light and close it, and put back
the arm.

Follow the steps of “Preparation of the
document imaging camera” in reverse.

Notes

• The light turns off automatically when the arm
is leaned.

• When the arm is not raised up, the camera
source cannot be projected.

• In the camera input selected, audio signals
from the RGB INPUT (AUDIO) is selected.

•“Camera gain” adjustment may improve view
of a camera subject which is too dark or vivid.

32

Locking the white balance

Normally, this camera automatically adjusts the
color balance to project the picture. If the
adjustment is not sufficient, follow the steps
below to lock the white balance.

1) Project a white paper and enlarge it to

fill the screen.

2) Press W.BALANCE to turn the LOCK

indicator on.
The white balance is locked.

To release the white balance, press
W.BALANCE again to turn the LOCK
indicator off.

Notes

• If you raise up the arm while the camera input
is selected, the color of the picture may vary
for an instant due to the white balance
adjustment. This is not malfunction.

• If you put back the arm and raise it up while
the white balance is locked (the LOCK
indicator is lit), the projector releases the
white balance but leaves the LOCK indicator
on. In this case, press W.BALANCE to restore
the indicator to the normal status.

CONTENTS

38

Correcting illuminated defects

If there are some luminous dots on a projected
picture, make the following correction.

1) While the camera is active, cover the
camera lens with a black paper
completely.

2) Press OVERLAY and ARM LIGHT at the
same time.

When flickering occurs by a
fluorescent lighting in the room

In this case, turn off the lighting of the room or
adjust the Camera gain in the following
manner.

1) Press ARM LIGHT to turn off the arm
lighting.

2) Press MENU to display the menu.

3) Press

4) Press

5) Press

or to select “Picture”.
or to select “Camera gain”.
or to adjust the value.

Camera

Overlaying projection

With the RGB input or the video input selected,
you can draw on the screen with the pen.

Preparation

• Select either of the RGB input or the video
input.

• Set the document imaging camera at the
ready.

1
2

36

OVERLAY PHOTO/TEXT ARM LIGHT

2

LOCK W.BALANCE CAMERA

Prepare a white paper to write
on.

Press OVERLAY.

The camera source is overlaid on the
picture.

Write on the paper with a blue

4

or red pen.

The handwriting is superimposed on the
picture.

RGB picture

Notes

• Handwriting in colors except blue and red
cannot be displayed properly.

• Handwriting in fine lines may not be displayed
properly.

• When Y/Pb/Pr signal enters, the overlaying
projection function is not available.

CONTENTS

39

Project the paper using the

3

camera.

Maintenance

CONTENTS

40

Trouble indications

If there is some problem inside the projector,
the indicators light up or flash.

ON/STANDBY MENU ENTER

SELECT/ADJUST

ON Off or lit (red)
LAMP –
TEMP –

The power does not come on.

→ Malfunction of the unit.

• Unplug the power cord and call the
dealer.

INPUT

ON

ON Indicator

LAMP

LAMP Indicator

TEMP

TEMP Indicator

ON Lit (red)
LAMP Lit (red)
TEMP –

The lamp turns off or does not light up.

→ The lamp’s end, or malfunction of the

unit.

• Lamp’s life length is over, replace the
lamp with new one.

42

• Unplug the power cord and call the
dealer.

ON Lit (red)
LAMP –
TEMP Lit (red)

The power turns off or does not come on.

→ The inside is too hot, or the projector has

been working in an area of high
temperature.

• Place the projector correctly so the
intake and exhaust fans’ holes are not
covered.

• Turn the projector off, and leave it for
a while, and turn it on again.

• Clean the air filter.

41

ON Lit (red)
LAMP –
TEMP Flashing (red)

The power turns off or does not come on.

→ Trouble with the intake fan.

• Unplug the power cord and call the
dealer.

ON Lit (red)
LAMP –
TEMP Flashing (orange)

The power turns off or does not come on.

→ Trouble with the exhaust fan.

• Unplug the power cord and call the
dealer.

Note

Before attempting any maintenance, unplug the
power cord.

Maintenance

Air filter, lens and main unit
cleaning

CAUTION

If you use the projector mounted on the
ceiling, ask the dealer to carry out the
maintenance such as cleaning.

Cleaning the air filter

The filter under the air filter cover is the device
to shut out dusts or dregs.

Do not use the projector with the filter taken off.
Give a frequent clean especially to the air filter.

(The cleaning period is once per about 50
hours).

1) Unplug the power cord.

2) Take off the air filter cover.

The filter is on the right side of the projector.
Pull up the filter tabs.

3) Clean the air filter cover.

Remove dust and stains with a vacuum
cleaner.

Cleaner’s
nozzle

4) Attach the air filter cover.

Notes

• When the air filter is dusty, the ventilation is
impaired. This causes the temperature inside
the projector to rise, and may damage the
unit.

• Attach the air filter cover firmly after the
cleaning. If it is not set correctly, the dusts will
enter and they will be projected and
overlapped on the picture.

CONTENTS

41

Cleaning the lens

Use a blower or a lens cleaner to clean the
lens.

Never rub or tap the lens with a hard object as
the lens surface is fragile.

Cleaning the main unit

• Pull out the power cord before cleaning.

• Use a soft cloth to wipe off stains from the

surface.

• To remove difficult stains, use a soft cloth
slightly moistened with a weak solution of
synthetic detergent and water, and finish with
a soft, dry cloth.

Replacing the intake, exhaust fans
and air filter

To maintain the efficiency of the projector,
replace the intake and exhaust fans about
every two to three years.

Ask the dealer for the replacement.

Maintenance

CONTENTS

42

Lamp replacement

The lamp will eventually begin to project dark
or dull pictures and finally will not light up.
(Lamp’s life length depends on the use
condition.) In such a case, replace the lamp
with new one.

CAUTION

• If you use the projector mounted on the
ceiling, ask the dealer to carry out the
maintenance such as cleaning or
replacement of the lamp.

• When replacing, always use lamp “TLPL6”
(for TLP450U, TLP451U , TLP650U ,
TLP651U, TLP470U , TLP471U, TLP670U ,
TLP671U) or “TLPL8” (for TLP650A,
TLP651A) (sold separately). For detail, refer
to the lamp instruction.

• If you have been using the projector, the
lamp will be very hot, and may cause burn
injuries. Wait for the lamp to cool (for longer
than 1 hour) before replacing it.

• If the lamp should break, please handle with
care to avoid injury due to broken pieces
and contact your dealer for repair service.

Unplug the power cord.

1

Take off the lamp cover on the

3

bottom panel.

Loosen two screws, and pull off the lamp
cover.

Pull out the lamp.

4

Loosen the two fixing screws, and lift up
the handle to pull out the lamp.

Load a new lamp.

5

Slide until it hits the bottom and tighten
the two fixed screws.

1

2

1

2

2

Attach the lamp cover.

6

Slide the cover in place and tighten two
screws.

3

1

2

Reset the lamp timer.

7

Refer to the lamp instructions for
resetting.

Notes

• The projector displays the total working time
at every 1,000 hours (only when plugged in
and turned on; ex. “ >1000H ”, “ >2000H ”).

• The lamp should be replaced if the total
working time exceeds about 2,000 hours.

• Attach the lamp cover firmly after replacing
the lamp. If it is not set correctly, the power
will not turn on.

• Use a new lamp when replacing it.

• The lamp is made of glass and is very fragile.
Do not touch the lamp with your bare hands
and do not jolt or damage it. Do not use an
exhausted lamp .

Wait until the lamp gets cold

2

enough.

1

Others

Before calling service
personnel

Check the following points before asking for
support service.

Refer also to “Trouble indications”.

The power does not come on.

• The power cord is disconnected.
→ Firmly plug in the power cord.

• The lamp cover is not attached correctly.
→ Attach the cover correctly.

The power turns off while using the
projector.

• The ambient temperature of the

projection room is too high.

→ Lower the ambient temperature of the

projection room, and turn the power
on.

40

19

42

• The “Brightness” adjustment is at its
darkest.

Make the “Brightness” adjustment.

→

• The source is not correctly connected to
the projector.

→ Connect the source correctly to the

projector.

16

32

No sounds are heard.

• The wrong input is selected.

→ Select the input source correctly.

• The audio muting mode is on.

→

Press MUTE to restore the sound.

• The sound volume is at the minimum.

→ Adjust the sound volume on the

menu.

• The source is not correctly connected to
the projector.

→ Connect the source correctly to the

projector.

33

16

23

21

CONTENTS

• The picture is out of focus.
→ Focus the picture.

• The projection distance is not

appropriate.

→ Adjust the distance properly.

• The projecting light is not hitting the

screen squarely.

→ Adjust the projecting direction so that

the light hits the screen squarely.

• The “Brightness”, “Contrast”, “Sharpness”

or “Phase” adjustments are not correct.

→ Make the “Image” or “Picture”

adjustments.

21

31 32

43

19

19

The pictures are dim.

• The “Brightness” or “Contrast”

adjustments are not correct.

→ Make the “Picture” adjustments.

• The lamp life is ending.
→ Replace the lamp.

42

32

No image appears.

• The lens cover is on.
→ Take off the lens cover.

• The wrong input is selected.
→ Select the input source correctly.

• The muting mode is on.

→

Press MUTE to restore the picture.

19

23

21

The images are blurred. Focusing is
uneven.

• The lens is dirty.
→ Clean the lens.

Use a lens cleaner to clean the lens.

41

The colors are faint. The colors are strange.

• The “Color”, “Tint”, “R-Level”, “G-Level” or
“B-Level” adjustments are not correct.

→ Make the “Picture” adjustments.

• The lamp life is ending.

→ Replace the lamp.

42

32

(Continued)

Others

(Continued)

Image does not appear when using the
document imaging camera.

The remote control does not work.

CONTENTS

44

• The wrong input is selected.
→ Select the correct input source.

37

Image is out of focus or not clear when
using the document imaging camera.

• The camera lens is dirty.
→ Clean the camera lens.

Use a lens cleaner to clean the lens.

• The document imaging camera is out of

focus.

→ Focus the document imaging camera.

38

• Focus between main unit and screen is

not correct.

→ Focus the picture by turning the

focusing ring.

• The light is not on.

The image may not be projected clearly if
the light is not on.

→ Turn on the light.

21

37

41

• The remote control is not facing the
remote sensor.

→ Face the remote control transmitter

toward the remote sensor on the
projector.

• The remote control is too far.

→ Operate within about 5 meters.

• There is an obstruction between the
remote control and the remote sensor.

→ Remove the obstacle.

• The batteries are exhausted.

→ Replace the batteries.

• The operating mode of the remote
control is not set correctly.

→ Set the POINTER/PJ selector

according to the equipment you want
to control.

15

14

13

15

Others

Input Signal

Mode determination and signal system

CONTENTS

: full compatib le : dot resizing display

: simplified display : high resolution serial transfer control

45

Signal

Mode System
NTSC

PAL/SECAM
NTSC/DTV480i
DTV480P/VGA60Hz
DTV720P
HDTV/DTV1080i
NEC24K
TEXT70
TEXT70
TEXT85
TEXT85
VGA60
VGA72
VGA75
VGA85
MAC13
SVGA56
SVGA60
SVGA72
SVGA75
SVGA85
MAC16
XGA43i

NTSC
PAL/SECAM
Digital broadcasting
Digital broadcasting
Digital broadcasting
Hi-Vision/Digital broadcasting
PC98 Standard
VGA-350
VGA-400
VGA 85Hz-1
VGA 85Hz-2
VGA 60Hz
VGA 72Hz
VGA 75Hz
VGA 85Hz-4
MAC-13”
SVGA 56Hz
SVGA 60Hz
SVGA 72Hz
SVGA 75Hz
SVGA 85Hz
MAC-16”
XGA 43Hz interlace

Frequency

Horizontal

(kHz)

15.734

15.625

15.750

31.500

47.500

33.750

24.830

31.470

31.470

37.861

37.861

31.470

37.861

37.500

43.269

35.000

35.156

37.879

48.077

46.875

53.674

49.724

35.522

Vertical

(Hz)

59.940

50.000

60.000

60.000

60.000

60.000

56.420

70.090

70.090

85.080

85.080

59.940

72.809

75.000

85.008

66.667

56.250

60.317

72.188

75.000

85.061

74.550

43.479x2

SynchronizingResolution (line)

Horizontal Vertical H/V

664

756
720/640
720/640

1280
1920

640

640

640

640

640

640

640

640

640

640

800

800

800

800

800

832

1024

484
574
480
480
720

1080

400
350
400
350
400
480
480
480
480
480
600
600
600
600
600
624
768

N/N
N/N
N/N
N/N
N/N
N/N
N/N
P/N
N/P
P/N
N/P
N/N
N/N
N/N
N/N

– / –

P/P
P/P
P/P
P/P
P/P

– / –

P/P

Default

650/651
670/671

model

450/451
470/471

model

Remarks

VIDEO IN
VIDEO IN
RGB IN
RGB IN
RGB IN
RGB IN
RGB IN
RGB IN
RGB IN
RGB IN
RGB IN
RGB IN
RGB IN
RGB IN
RGB IN
RGB IN
RGB IN
RGB IN
RGB IN
RGB IN
RGB IN
RGB IN
RGB IN

(Continued)

Others

(Continued)

CONTENTS

: full compatible : dot resizing display

: simplified display : high resolution serial transfer control

46

Signal

Mode System
XGA60

XGA70
XGA75
XGA85
MAC19
SXGA75-1
MAC21
SXGA60-1
SXGA85-1
SXGA43i
SXGA60-2
SXGA75-2
SXGA85-2
UXGA60
UXGA65
UXGA70
UXGA75

XGA 60Hz
XGA 70Hz
XGA 75Hz
XGA 85Hz
MAC-19”
SXGA 75Hz
MAC-21”
SXGA 60Hz
SXGA 85Hz
SXGA 43Hz interlace
SXGA 60Hz
SXGA 75Hz
SXGA 85Hz
UXGA 60Hz
UXGA 65Hz
UXGA 70Hz
UXGA 75Hz

Frequency

Horizontal

(kHz)

48.363

56.476

60.023

68.677

60.197

67.500

68.681

60.000

85.938

46.433

63.981

79.976

91.146

75.000

81.130

87.500

93.750

Vertical

(Hz)

60.004

70.069

75.029

84.997

74.872

75.000

75.062

60.000

85.002

43.436x2

60.020

75.025

85.024

60.000

65.000

70.000

75.000

Horizontal Vertical H/V

1024
1024
1024
1024
1024
1152
1152
1280
1280
1280
1280
1280
1280
1600
1600
1600
1600

768
768
768
768
768
864
870
960

960
1024
1024
1024
1024
1200
1200
1200
1200

Notes

• If the mode identification does not define the mode described on the chart above, adjust to the
projection details.

• If the mode identification is carried out correctly, a normal display may be not obtained
depending on the signal frequency.

• SXGA, UXGA signals can be projected since the projector has simplified compatibility with them.
(However, letters and lines can be inequal or a part can be missing. Some signals may not be
projected at all.)

• Some computers may have output modes which are not compatible with this projector. Check
the compatibility of the connectors, signal levels, timing, and resolutions.

SynchronizingResolution (line)

N/N
N/N
P/P
N/N
N/N
P/P

– / –

P/P
P/P
P/P
P/P
P/P
P/P
P/P
P/P
P/P
P/P

Default

650/651
670/671

model

450/451
470/471

model

Remarks

RGB IN
RGB IN
RGB IN
RGB IN
RGB IN
RGB IN
RGB IN
RGB IN
RGB IN
RGB IN
RGB IN
RGB IN
RGB IN
RGB IN
RGB IN
RGB IN
RGB IN

(Continued)

Others

(Continued)

Signal assignment

CONTENTS

47

5

D-SUB 15 pin shrinking terminal

10

1

6

1115

Input Signal

Video signal

Analog 0.7V(p-p) 75Ω

Horizontal synchronizing signal

TTL lev el (positive/negative
polarity)

Vertical synchronizing signal

TTL level (positive/negative
polarity)

Composite synchronizing signal

TTL level

Pin arrangements

Pin No.

1
2
3
4
5
6
7
8

9
10
11
12
13

14
15

Video input (Red)
Video input (Green)
Video input (Blue)
N.C
GND
GND (Red)
GND (Green)
GND (Blue)
N.C
GND
GND
N.C
Horizontal synchronizing/
composite synchronizing signal
Vertical synchronizing signal
N.C

(Continued)

Others

(Continued)

RGB signal defaults

CONTENTS

48

The following signals are factory set as defaults
in each mode. However, some computers may
have different timings than those in the chart.
Make the necessary adjustments if the picture
has flickers or is blurred.

Timing chart

Mode Resolution

NEC24k
TEXT70
TEXT70
TEXT85
TEXT85
VGA60
VGA72
VGA75
VGA85
MAC13
SVGA56
SVGA60
SVGA72
SVGA75
SVGA85
MAC16
XGA60
XGA70
XGA75
XGA85
MAC19

640 x 400
640 x 350
640 x 400
640 x 350
640 x 400
640 x 480
640 x 480
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600

823 x 624
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768

A

(Pixels)B(Pixels)C(Pixels)D(Pixels)E(Pixels)fh(kHz)

85
50
50
96
96

48
128
120

80

96
128

88

64
160
152
216
160
144
176
208
180

640
640
640
640
640
640
640
640
640
640
800
800
800
800
800

832
1024
1024
1024
1024
1024

59
14
14
32
32
16
24
16
56
64
24
40
56
16
32
40
24
24
16
48
20

Video

Hor Sync

64
96
96
64
64
96
40
64
56
64

72
128
120

80

64

64
136
136

96

96

96

Video Timing (Horizontal)

AC

D

848
800
800
832
832
800
832
840
832

864
1024
1056
1040
1056
1048
1152
1344
1328
1312
1376
1320

B

E

24.83

31.47

31.47

37.86

37.86

31.47

37.86

37.50

43.27

35.00

35.16

37.88

48.08

46.88

53.67

49.72

48.363

56.476

60.023

68.677

60.197

fv

(Hz)

56.42

70.09

70.09

85.08

85.08

59.94

72.81

75.00

85.01

66.67

56.25

60.32

72.19

75.00

85.06

74.55

60.004

70.069

75.029

84.997

74.872

Ver Sync

Clock

(MHz)G(Lines)H(Lines)I(Lines)J(Lines)K(Lines)

21.053

25.175

25.175

31.500

31.500

25.175

31.500

31.500

36.000

30.240

36.000

40.000

50.000

49.500

56.250

57.283

65.000

75.000

78.750

94.500

73.200

Video

25
59
34
60
41
33
28
16
25
39
22
23
23
21
27
39
29
29
28
36
30

Video Timing (Vertical)

G

J

400
350
400
350
400
480
480
480
480
480
600
600
600
600
600
632
768
768
768
768
768

H

K

7
38
13
32

1
10

9

1

1

3

1

1
37

1

1

1

3

3

1

1

3

I

8
2
2
3
3
2
3
3
3
3
2
4
6
3
3
3
6
6
3
3
3

440
449
449
445
445
525
520
500
509
525
625
628
666
625
631
667
806
806
800
808
804

Others

CONTENTS

49

Adjustments with RS-232C

Conditioning of the Projection Unit can also be
done by a computer via the RS-232C, as well
as by the remote control.

Signal

RXD
CTS
DSR

GND

RTS

N.C

TXD

N.C

7

8

5

12

Mini DIN 8-pin

(Main Unit)

Interface format

Communication

1

method

Communication

2

format

Data format

3

Return value

4

Pin No.

1

6

3

4

2
3
4
5
6
7
8

RS-232C
9600 bps, No parity, Data length: 8 bit,
Stop bit: 1 bit

STX (02h) Command (3Byte) ETX (03h)
One command only can be used in one
communication.

Command shall be composed of
alphanumeric characters of ASCII
description. Use only capital letters.

Acknowledge ACK (06h)
Not Acknowledge NAK (15h)

Meaning
Receiving data
Consent to send
Data set ready
Signal ground
Request to send
No connection
Sending data
No connection

Command list

Classification

NORMAL
NORMAL
NORMAL
NORMAL
NORMAL
NORMAL
NORMAL
NORMAL
NORMAL
NORMAL
NORMAL
NORMAL

RESIZE
RESIZE
RESIZE
RESIZE

RESIZE
CAMERA
CAMERA
CAMERA
CAMERA
CAMERA
CAMERA

ADJUST
ADJUST

Command
POF
PON
MOF
MON
AON
DOF
DON
FOF
FON
IN1
IN2
IN3
RS0
RS1
RS2
RS3
RS4
CW0
CW1
CS0
CS1
CO0
CO1
ARS
ARG

Meaning
Power OFF
Power ON
Video audio mute OFF
Video audio mute ON
Audio mute ON
Status display OFF
Status display ON
Freeze OFF
Freeze ON
Input (RGB)
Input (Video)
Input (Camera)
Resize reset
Resize 1
Resize 2
Resize 3
Resize 4
Automatic W/B OFF
Automatic W/B ON
Text mode OFF
Text mode ON
Overlaying mode OFF
Overlaying mode ON
Adjustment value reset
Adjustment value increase

Note

When commands are transmitted serially, keep more than 100 ms
intervals between the commands.

(Continued)

Others

(Continued)

CONTENTS

50

Classification

ADJUST
ADJUST

ADJUST
KEYSTONE
KEYSTONE

Image
Image
Image
Image

Image
Picture
Picture
Picture
Picture
Picture
Picture
Picture
Picture
Picture

Audio
Audio

Audio
Default
Default
Default

Command
ALF
AUP
ADW
PKA
PKS
PAT
PVP
PHP
PPH
PCK
VBR
VCL
VCN
VSH
VTN
VLB
VLG
VLR
CGN
VOL
VTR
VBS
LJP
LEN
LFR

Meaning
Adjustment value decrease
Adjustment value increase
Adjustment value decrease
Keystone automatic adjustment
Keystone manual adjustment
Panel automatic adjustment
Vertical position adjustment
Horizontal position adjustment
Phase adjustment
Clock adjustment
Brightness adjustment
Color adjustment
Contrast adjustment
Sharp adjustment
Tint adjustment
Blue level adjustment
Green level adjustment
Red level adjustment
Camera gain adjustment
Volume adjustment
Treble adjustment
Bass adjustment
Japanese display setting
English display setting
French display setting

Classification

Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default

Save
Save

Command
LGR
LIT
LSP
LP0
PJ0
PJ1
PJ2
PJ3
KR0
KR1
KV0
KV1
KV2
KV3
KV4
KV5
KV6
KV7
KV8
KV9
KVA
MO0
MO1
DRS
DSV

Meaning
German display setting
Italian display setting
Spanish display setting
Portuguese display setting
Floor-mounted front projection
Floor-mounted rear projection
Ceiling-mounted front projection
Ceiling-mounted rear projection
RGB input mode (RGB)
RGB input mode (Y/Pb/Pr)
Video signal mode (Automatic)
Video signal mode (60/NTSC/JAPAN)
Video signal mode (60/NTSC/3.58)
Video signal mode (60/NTSC/4.43)
Video signal mode (60/PAL/3.58)
Video signal mode (60/PAL/4.43)
Video signal mode (50/NTSC/3.58)
Video signal mode (50/NTSC/4.43)
Video signal mode (50/PAL/3.58)
Video signal mode (50/PAL/4.43)
Video signal mode (50/SECAM/4.43)
OSD mute OFF
OSD mute ON
Adjustment value preset
Adjustment value saving

Others

Specifications

Main unit

Power requirements

AC 100 – 240V 50/60Hz

Power consumption

TLP450U, TLP470U : 220W
TLP451U, TLP471U : 235W
TLP650U, TLP670U : 220W
TLP651U, TLP671U : 235W
TLP650A : 200W
TLP651A : 210W

Mass TLP450U, TLP470U : 3.7 Kg

TLP451U, TLP471U : 4.5 Kg
TLP650U, TLP670U : 3.7 Kg
TLP651U, TLP671U : 4.5 Kg
TLP650A : 3.7 Kg
TLP651A : 4.5 Kg

Dimensions

TLP450U, TLP650U , TLP650A,
TLP470U, TLP670U :
318 x 87 x 232 (mm) (W/H/D)
(Including the projecting sections)

TLP451U, TLP651U , TLP651A,
TLP471U, TLP671U :
318 x 87 x 288 (mm) (W/H/D)
(Including the projecting sections)

Ambient environment

Temperature : 0°C to 35°C
Humidity : 30% to 70% RH

Lamp TLP450U, TLP451U, TLP650U ,

TLP651U, TLP470U , TLP471U,
TLP670U, TLP671U :
UHP lamp 150W

TLP650A, TLP651A :

UHP lamp 120W
Speaker 1W (monaural)
RGB INPUT

RGB signal : (D-sub 15-pin)

Audio: 1V(p-p), more than 22kΩ,

ø3.5mm stereo mini jack
VIDEO INPUT

S-video signal : Mini DIN 4-pin

Video signal : 1V(p-p), 75Ω

Audio : 1V(p-p), more than 22kΩ,

RCA pin jack
MONITOR OUTPUT

RGB signal : D-sub 15-pin

Audio : 1V(p-p), less than 2.2kΩ,

ø3.5mm stereo mini jack
CONTROL terminal

Mini DIN 8-pin (RS-232C)
Cabinet Material

ABS resin

Liquid crystal display

Projection system

3-pannels transmission
Panel size

0.9 inches

Driving system

CONTENTS

TFT active matrix

Picture elements

TLP450U, TLP451U , TLP470U,
TLP471U :
480,000 pixels (800 x 600 dots) x 3

TLP650U, TLP651U , TLP650A,
TLP651A, TLP670U, TLP671U :
786,432 pixels (1024 x 768 dots) x 3

Projection lens

Lens Zooming lens F = 1.8 – 2.1

f = 36 – 47mm
Focusing Manual operation
Zooming Manual operation

Document imaging camera

Lens F = 1.8 – 2.3, f = 5.8 – 23.2mm
Focus Manual operation
Iris Auto/Level adjustment allowed
Image element

1/3 inch CCD
Total picture elements

810,000 pixels
Resolution Horizontal 1024, vertical 768
Lighting LED light

51

(Continued)

Others

(Continued)

Accessories

Wireless remote control ............................... 1

AA size battery ............................................. 2

Power cord ................................................... 1

RGB cable............................................1 (3m)

Adapter for Macintosh computers ................ 1

PC audio cable.....................................1 (3m)

Audio/Video cable ................................1 (3m)

Lens cover.................................................... 1

REMOTE MOUSE RECEIVER .................... 1

IBM/MAC mouse cable

(for REMOTE MOUSE RECEIVER)............. 1

PS/2 mouse adapter

(for REMOTE MOUSE RECEIVER)............. 1

MAC mouse adapter

(for REMOTE MOUSE RECEIVER)............. 1

USB mouse cable

(for REMOTE MOUSE RECEIVER)............. 1

Carrying case ............................................... 1

The design and specifications are subject to
change without notice.

CONTENTS

Trademarks
NEC, PC-98 series are trademarks of NEC

Corporation.
IBM, DOS/V, VGA, SVGA, XGA, SXGA, UXGA

are trademarks or registered trademarks of
International Business Machines Corporation.

Macintosh is a registered trademark of Apple
Computer, Inc.

Windows is a registered trademark of Microsoft
Corporations in the U.S. and other country.

52

Others

CONTENTS

53

LIMITED WARRANTY

TOSHIBA TLP600/400 Series 3LCD Data Projector

Toshiba America Consumer Products, Inc. (TACP) makes the following
limited warranties.

These limited warranties extend to the original end-user purchaser.

Limited two (2) Years Warranty of Parts and Labor

TACP warrants this product and its parts against defects in materials or
workmanship for a period of two years after the date of original retail
purchase.

For a period of two years after the date of original retail purchase,
TACP will repair a defective product or a part, without charge to you.

This warranty also covers accessories of 3LCD Data Projector.
This warranty period of the lamp is ninety (90) days.

Your Responsibility

The above warranties are subject to the following conditions.

1. You must retain your bill of sale or provide other proof of purchase.

2. You must make a written notification within thirty (30) days after
your discovery of a defective product or part.

3. All warranty servicing of this product or parts must be made by
TACP or a service facility authorized by TACP.

4. These warranties are effective only if the product is purchased and
operated in the USA.

5. Labor service charges for installation and adjustment of customer
controls are not covered by this warranty.

6. Warranties extend only to defects in materials or workmanship as
limited above and do not extend to any product or parts which have
been lost or discarded by you or to damage to products or parts
caused by misuse, accident, improper installation, improper
maintenance or use in violation of instructions furnished by us; or to
units which have been altered or modified without authorized of
TACP or to damage to product or parts thereof which have had the
serial number removed, altered, def aced or rendered illegible.

7. If it is determined after investigation that the claimed problem was
not covered with this warranty, you shall pay the cost of
investigation at prevailing rate.

Step-by-step procedure how to obtain warranty service

To obtain warranty servicing, you should:

1. Read the owners manual thoroughly before operating.

2. Please contact your dealer for an immediate service and an advice.

3. If your dealer is not able to assist you, please contact TACP Service
Center listed below or a servicing facilities authorized by TACP for a
warranty service within thirty (30) days after you find a defective
product or part.

4. Arrange for a delivery of the product to TACP Service Center or a
servicing facilities authorized by TACP.

5. The shipment of the product must be insured, safely and securely
packed, preferably in the original carton or a carton with an
equivalent protection. A letter explaining the defect and also a copy
of the bill of sale or other proof of purchase must be enclosed. All
transportation and insurance charges must be prepaid by you.

(Continued)

Others

(Continued)

6. The repaired product is returned freight prepaid to the purchaser
after warranty servicing.

7. If you have any questions about service, please contact the
following TACP Service Center.

TACP is not obligated to provide purchasers with a substitute unit
during the warranty period.

82 Totowa Rd., Wa yne,
NJ 07470, U.S.A.
Phone: [phone]
Fax: [phone]
Toll Free for Service Call: 1-800-631-3811

CONTENTS

54