现货库存、技术资料、百科信息、热点资讯，精彩尽在鼎好!
TOSHIBA Photocoupler Photo Relay
TLP296G
TLP296G
Telecommunication
Data Acquisition
Measurement Instrumentation
The TOSHIBA TLP296G consists of gallium arsenide infrared emitting
diode optically coupled to a photo−MOS FET in a 8 lead DIP package
(DIP8).
The TLP296G is a bi−directional switch which can replace mechanical
relay in many applications.
· 8 pin DIP (DIP8), 2 channel type (2−form−A)
· Peak off−state voltage: 400 V (min.)
· Trigger LED current: 5 mA (max.)
· On−state current: 100 mA (max.)
· On−state resistance: 30 Ω (max.)
· Isolation voltage: 2500 V
· Trigger LED current (Ta = 25°C)
Classification
(IFT2) ― 2 T2
Standard ― 5 T2, blank
(min.)
rms
Trigger LED
Current (mA)
@ION = 100 mA
Min. Max.
Marking Of
Classification
TOSHIBA 11−10C4
Weight: 0.54 g
Pin Configuration
Unit in mm
(top vi ew)
(*): Ex. Rank IFT2: TLP296G (IFT2)
1
2002-09-25
TLP296G
Maximum Ratings
Forward current IF 50 mA
Forward current derating (Ta ≥ 25°C) ∆IF / °C -0.5 mA / °C
Peak forward current (100 µs pulse, 100 pps) IFP 1 A
LED
Reverse voltage VR 5 V
Junction temperature Tj 125 °C
Off-state output terminal voltage V
On-state current
On-state current derating
Detector
(Ta ≥ 25°C)
Junction temperature Tj 125 °C
Storage temperature range T
Operating temperature range T
Lead soldering temperature (10 s) T
Isolation voltage (AC, 1 min., R.H.≤ 60%) Note 2 BVS 2500 V
(Ta = 25°C)
Characteristic Symbol Rating Unit
400 V
OFF
Both channel Note 1 100
One channel
Both channel Note 1 -1.0
One channel
ION
/ °C
∆I
ON
-55~125 °C
stg
-20~85 °C
opr
260 °C
sol
120
-1.2
(Note 1): Two channels operationg simultaneously.
mA
mA / °C
rms
(Note 2): Device considered a two-terminal device: Pins 1, 2, 3and 4 shorted together and pins 5, 6,
7and 8 shorted together.
Recommended Operating Conditions
Characteristic Symbol Min. Typ. Max. Unit
Supply voltage VDD ― ― 320 V
Forward current IF 7.5 15 25 mA
On-state current ION ― ― 100 mA
Operating temperature T
-20 ― 80 °C
opr
2
2002-09-25
TLP296G
Individual Electrical Characteristics
Characteristic Symbol Test Condition Min. Typ. Max. Unit
Forward voltage VF IF = 10 mA 1.0 1.15 1.3 V
Reverse current IR VR = 5 V ― ― 10 µA
LED
Capacitance CT V = 0, f = 1 MHz ― 30 ― pF
Off-state current I
Capacitance C
Detector
V
OFF
V = 0, f = 1 MHz ― ― ― pF
OFF
(Ta = 25°C)
= 400 V ― ― 1 µA
OFF
Coupled Electrical Characteristics
Characteristic Symbol Test Condition Min. Typ Max. Unit
Trigger LED current IFT ION = 100 mA ― 2 5 mA
On-state resistance RON ION = 100 mA, IF = 10 mA ― 20 30 Ω
(Ta = 25°C)
Isolation Characteristics
Characteristic Symbol Test Condition Min. Typ. Max. Unit
(Ta = 25°C)
Capacitance input to output CS VS = 0, f = 1 MHz ― 0.8 ― pF
Isolation resistance RS VS = 500 V, R.H.≤ 60% 5 ´ 1010 1014 ― Ω
Isolation voltage BVS
AC, 1 minute 2500 ― ―
AC, 1 second (in oil) ― 5000 ―
DC, 1 minute (in oil) ― 5000 ― Vdc
V
Switching Characteristics
Characteristic Symbol Test Condition Min. Typ. Max. Unit
Turn-on time tON ― ― 4
Turn-off time t
(Ta = 25°C)
OFF
R
= 200 Ω (Note 1)
L
V
= 20 V, IF = 10 mA
DD
― ― 4
(Note 1): Switching time test circuit
rms
ms
3
2002-09-25
TLP296G
4
2002-09-25
TLP296G
5
2002-09-25
TLP296G
RESTRICTIONS ON PRODUCT USE
· TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc..
· The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this
document shall be made at the customer’s own risk.
· Gallium arsenide (GaAs) is a substance used in the products described in this document. GaAs dust and fumes
are toxic. Do not break, cut or pulverize the product, or use chemicals to dissolve them. When disposing of the
products, follow the appropriate regulations. Do not dispose of the products with other industrial waste or with
domestic garbage.
· The products described in this document are subject to the foreign exchange and foreign trade laws.
000707EBC
· The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other
rights of the third parties which may result from its use. No license is granted by implication or otherwise under
any intellectual property or other rights of TOSHIBA CORPORATION or others.
· The information contained herein is subject to change without notice.
6
2002-09-25
Loading...