TOSHIBA TLP192A Technical data
现货库存、技术资料、百科信息、热点资讯，精彩尽在鼎好!
TOSHIBA Photocoupler Photorelay
TLP192A
TLP192A
Telecommunications
Measurement and Control Equipment
Data Acquisition System
Measurement Equipment
The Toshiba TLP192A consists of a gallium arsenide infrared emitting
diode optically coupled to a photo-MOSFET in a 6-pin SOP package. This
photorelay has higher output current rating than phototransistor-type
photocoupler; hence, it is suitable for use as On/Off control for high
current.
• 6-pin SOP (2.54SOP6): Height = 2.1 mm, pitch = 2.54 mm
• Normally open (1-form-A) device
• Peak off-state voltage: 60 V (min)
• Trigger LED current: 3 mA (max)
• On-state current: 400 mA (max)
• On-state resistance: 2 Ω (max)
• Isolation voltage: 1500 Vrms (min)
• UL recognized: UL1557, File No.E67349
Pin Configuration
(top view)
Unit: mm
JEDEC ―
JEITA ―
TOSHIBA 11-7C1
Weight: 0.13 g (typ.)
Schematic
1
2
3 4
1 6
2 5
6
5
1: Anode
2: Cathode
4: Drain D1
5: Source
6: Drain D2
4
1
2007-10-01
TLP192A
>
>
<
Absolute Maximum Rating
Characteristics Symbol Rating Unit
Forward current IF 50 mA
Forward current derating
25°C)
(Ta
LED
Peak forward current
(100 μs pulse, 100 pps)
Reverse voltage VR 5 V
Junction temperature T
Off-state output terminal
voltage
A connection 400
On-state
current
Detector
Forward
current
derating
(Ta
Junction temperature T
Storage temperature T
Operating temperature T
Lead soldering temperature (10 s) T
Isolation voltage
(AC, 1 min, R.H.
(Note 1)
B connection 400
C connection
A connection −4.0
B connection −4.0
25°C)
C connection
60%)
(Ta = 25°C)
ΔI
F
I
FP
V
OFF
I
ON
ΔI
ON
stg
opr
sol
BVS 1500 Vrms
/°C −0.5 mA/°C
1 A
125 °C
j
60 V
/°C
125 °C
j
−55 to 125 °C
−40 to 85 °C
260 °C
mA
800
mA/°C
−8.0
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Note 1: LED pins are shorted together. Detector pins are also shorted together.
Recommended Operating Conditions
Characteristics Symbol Min Typ. Max Unit
Supply voltage VDD ⎯ ⎯ 48 V
Forward current IF 5 7.5 25 mA
On-state current ION ⎯ ⎯ 400 mA
Operating temperature T
Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the
device. Additionally, each item is an independent guideline respectively. In developing designs using this
product, please confirm specified characteristics shown in this document.
−20 ⎯ 65 °C
opr
2
2007-10-01
Circuit Connections
TLP192A
1
2
3
6
5
4
A connection B connection C connection
LOAD
AC
DC
or
1
2
3
6
5
4
LOAD
DC
1
2
3
6
5
4
LOAD
DC
3
2007-10-01
Loading...