现货库存、技术资料、百科信息、热点资讯，精彩尽在鼎好!
TOSHIBA Photocoupler GaAs Ired & Photo−Triac
TLP165J
TLP165J
Triac Drive
Programmable Controllers
AC−Output Module
Solid State Relay
The TOSHIBA mini flat coupler TLP165J is a small outline coupler,
suitable for surface mount assembly.
The TLP165J consists of a photo triac, optically coupled to a gallium
arsenide infrared emitting diode.
· Peak off−state voltage: 600 V (min.)
· Trigger LED current: 10 mA (max.)
· On
−state current: 70 mA (max.)
· Isolation voltage: 2500 Vrms (min.)
· UL recognized: UL1577, file no. E67349
· Option(V4)type
VDE approved: VDE 0884 satisfied
Maximum operating insulation voltage: 565Vpk
Highest permissible over voltage: 4000Vpk
Trigger LED Current
Unit in mm
TOSHIBA 11−4C3
Weight: 0.09 g
Pin Configurations
Type
(Note 1)
(IFT7) ― 7 T7
None ― 10 T7, blank
* Exp. rank IFT7: TLP165J (IFT7)
(Note 1) Application type name for certification test, please use standard product
type name, i.e.
TLP165J(IFT7): TLP165J
Trigger LED Current (mA)
VT=6V, Ta=25°C
Min. Max.
Marking Of
Classification
1
3
1 . Anode
3 . Cathode
4 . Terminal 1
6 . Terminal 2
6
4
1
2002-09-25
TLP165J
Maximum Ratings
Forward current IF 50 mA
Forward current derating (Ta ≥ 53°C) ∆IF / °C -0.7 mA / °C
Peak forward current (100µs pulse, 100 pps) IFP 1 A
LED
Reverse voltage VR 5 V
Junction temperature Tj 125 °C
Off- state output terminal voltage V
On-state RMS current
On-state current derating (Ta ≥ 25°C) ∆IT / °C -0.67 mA / °C
Peak on-state current (100µs pulse, 120 pps) ITP 2 A
Detector
Peak nonrepetitive surge current
(PW=10ms, DC=10%)
Junction temperature Tj 115 °C
Storage temperature range T
Operating temperature range T
Lead soldering temperature (10s) T
Isolation voltage (AC, 1 min., R.H. ≤ 60%) (Note 2) BVS 2500 Vrms
(Ta = 25°C)
Characteristic Symbol Rating Unit
600 V
DRM
Ta=25°C 70
Ta=70°C
I
T(RMS)
I
1.2 A
TSM
-55~125 °C
stg
-40~100 °C
opr
260 °C
sol
40
mA
(Note 2) Device considered a two terminal device: Pins 1 and 3 shorted together and 4
and 6 shorted together.
Recommended Operating Conditions
Characteristic Symbol Min. Typ. Max. Unit
Supply voltage VAC ― ― 240 Vac
Forward current IF 15 20 25 mA
Peak on-state current ITP ― ― 1 A
Operating temperature T
-25 ― 85 °C
opr
2
2002-09-25
TLP165J
Electrical Characteristics
Characteristic Symbol Test Condition Min. Typ. Max. Unit
Forward voltage VF IF=10mA 1.0 1.15 1.3 V
Reverse current IR V
LED
Capacitance CT V=0, f=1MHz ― 30 ― pF
Peak off-state current I
Peak on-state voltage VTM ITM=70mA ― 1.7 2.8 V
Holding current IH ― ― 1.0 ― mA
Critical rate of rise
Detector
of off-state voltage
Critical rate of rise
of commutating voltage
(Ta = 25°C)
V
DRM
dv / dt V
dv / dt(c) I
=5V ― ― 10 µA
R
=600V ― 10 1000 nA
DRM
=240Vrms, Ta=85°C (Note 3) ― 500 ― V / µs
in
=15mA, Vin=60Vrms (Note 3) ― 0.2 ― V / µs
T
Coupled Electrical Characteristics
Characteristic Symbol Test Condition Min. Typ. Max. Unit
Trigger LED current IFT VT=6V ― ― 10 mA
Capacitance input to output Cs VS=0, f=1MHz ― 0.8 ― pF
Isolation resistance RS VS=500V, R.H. ≤ 60% 1×1012 1014 ― Ω
Isolation voltage BVS
Turn-on time tON
(Ta = 25°C)
AC, 1 minute 2500 ― ―
AC, 1 second, in oil ― 5000 ―
DC, 1 minute, in oil ― 5000 ― Vdc
=6→4V, RL = 100Ω
V
D
I
=Rated IFT×1.5
F
― ― 100 µs
Vrms
(Note 3) dv / dt test circuit
R
+
V
CC
－
120Ω
in
V
in
5V，VCC
1 6
～
R
L
0V
3 4
4KΩ
dv / dt (c)
dv / dt
3
2002-09-25
TLP165J
RESTRICTIONS ON PRODUCT USE
· TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc..
· The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this
document shall be made at the customer’s own risk.
· Gallium arsenide (GaAs) is a substance used in the products described in this document. GaAs dust and fumes
are toxic. Do not break, cut or pulverize the product, or use chemicals to dissolve them. When disposing of the
products, follow the appropriate regulations. Do not dispose of the products with other industrial waste or with
domestic garbage.
· The products described in this document are subject to the foreign exchange and foreign trade laws.
000707EBC
· The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other
rights of the third parties which may result from its use. No license is granted by implication or otherwise under
any intellectual property or other rights of TOSHIBA CORPORATION or others.
· The information contained herein is subject to change without notice.
4
2002-09-25
Loading...