Toshiba TDP-TW100, TDP-TW95 User Manual
OWNER’S MANUAL
DATA PROJECTOR
TDP-TW95
TDP-TW100
Before Using
Preparations
Operations
Maintenance
Others
Before Using
SAFETY PRECAUTIONS
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended
to alert the user to the presence of uninsulated "dangerous voltage" within the product's
enclosure that may be of sufficient magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES
ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE CABINET.
REFER SERVICING TO QUALIFIED PERSONNEL ONLY.
WARNING: Handling the cord on this product or cords associated with accessories sold with
USA only
WARNING: This [product] contains mercury. Disposal of mercury may be regulated due to
USA only
this product, will expose you to lead, a chemical kno wn to the State of California
to cause birth defects or other reproductive harm.
environmental considerations. For disposal or recycling information, please
contact your local authorities or the Electronic Industries Alliance: www .eiae.org.
Wash hands after handling
MODEL NAME: TDP-TW95/TDP-TW100
FCC Radio Frequency Interference Statement
Note: This equipment has been tested and found to comply with the limits for a Class
USA only
WARNING: Changes or modifications made to this equipment, not expressly approved by
USA only
A digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment gener ates, uses, and
can radiates radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the
interference at his own expense.
Toshiba, or parties authorized by T oshiba, could v oid the user’s authority to operate
the equipment.
Before Using
.
Notice: This Class A digital apparatus complies with Canadian ICES-003. Cet appareil
CANADA only
WARNING: This is a Class A product. In a domestic environment this product may cause
numérique de la classe A est conforme à la norme NMB-003 du Canada.
radio interference in which case the user may be required to take adequate
measures.
32
IMPORTANT SAFETY INSTRUCTIONS
CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND
INSTRUCTIONS GIVEN IN THIS OWNER'S MANUAL AND THOSE
MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR FUTURE
REFERENCE.
This unit is fully transistorized and does not contain any parts that can be repaired by the
user.
DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO
DANGEROUS VOLTAGE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL ONLY.
1. Read Owner's Manual
After unpacking this product, read
the owner's manual carefully, and
follow all the operating and other
instructions.
2. Power Sources
This product should be operated
only from the type of power source
which does not exceed the voltage
range specified on the
rating label and the power cord.
If you are not sure of the type of
power supply to your home,
consult your product dealer or
local power company.
3. Source of Light
Do not look into the lens while the
lamp is on. The strong light from
the lamp may cause damage to
your eyes or sight.
4. Ventilation
Openings in the cabinet are
provided for ventilation and to
ensure reliable operation of the
product and to protect it from
overheating, and these openings
must not be blocked or covered.
The openings should never be
blocked by placing the product on
a bed, sofa, rug or other similar
surface. This product should not
be placed in a built-in installation
such as a bookcase or rack unless
proper ventilation is provided.
5. Heat
The product should be situated
away from heat sources such as
radiators, heat registers, stoves, or
other products (including
amplifiers) that produce heat.
6. Water and Moisture
Do not use this product near water.
- for example, near a bath tub,
wash bowl, kitchen sink, or laundry
tub; in a wet basement; or near a
swimming pool and the like.
7. Cleaning
Unplug this product from the wall
outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners.
Use a soft cloth for cleaning.
8. Power-Cord Protection
Power-supply cords should be
routed so that they are not likely to
be walked on or pinched by items
placed upon or against them,
paying particular attention to cords
at plugs, convenience receptacles,
and the point where they exit from
the product.
9. Overloading
Do not overload wall outlets; to
reduce the risk of electric shock,
do not use the polarized plug with
an extension cord , receptacle, or
other outlet unless the blades can
be inserted completely with threewire grounding type to prevent
blade exposure. As this can result
in a risk of fire or electric shock.
Before Using
54
IMPORTANT SAFETY INSTRUCTIONS (Continued)
10. Lightning storms
For added protection for this
product during storm, or when it is
left unattended and unused for
long periods of time, unplug it from
the wall outlet. This will prevent
damage to the product due to
lightning and power-line surges.
However, while it is thundering or
lightning, do not touch the
apparatus and any connected
cable and/or equipment.
This will prevent you from
receiving the electric shock by an
electric surge.
11. Object and Liquid Entry
Never push objects of any kind
into this product through openings
as they may touch dangerous
voltage points or short-out parts
that could result in a fire or electric
shock. Never spill liquid of any
kind on the product.
12. Do not place the product
vertically
Do not use the product in the
upright position to project the
pictures at the ceiling, or any other
vertical positions. It may fall down
and dangerous.
13. Stack Inhibited
Do not stack other equipment on
this product or do not place this
product on the other equipment.
Top and bottom plates of this
product develops heat and may
give some undesirable damage to
other unit.
14. Attachments
Do not use attachments not
recommended by the product
manufacturer as they may cause
hazards.
15. Accessories
Do not place this product on an
unstable cart, stand, tripod,
bracket, or table. The product may
fall, causing serious injury to a
child or adult, and serious damage
to the product. A product and cart
combination should be moved with
care. Quick stops, excessive
force, and uneven surfaces may
cause the product and cart
combination to overturn.
S3125A
16. Damage Requiring Service
Unplug this product from the wall
outlet and refer servicing to
qualified service personnel under
the following conditions:
a) When the power-supply cord or
plug is damaged.
b) If liquid has been spilled, or
objects have fallen into the
product.
c) If the product has been exposed to
rain or water.
d) If the product does not operate
normally by following the operating
instructions. Adjust only those
controls that are covered by the
operating instructions as an
improper adjustment of other
controls may result in damage and
will often require extensive work by
a qualified technician to restore
the product to its normal
operation.
e) If the product has been dropped or
damaged in any way (If the cabinet
should break, please handle with
care to avoid injury) .
f) When the product exhibits a
distinct change in performance this indicates a need for service.
17. If glass components,
including lens and lamp,
should break, contact your
dealer for repair service.
This product incorporates glass
components, including a lens and
a lamp. If such parts should
break, please handle with care to
avoid injury and contact your
dealer for repair service. The
broken pieces of glass may cause
to injury. In the unlikely event of
the lamp rupturing, thoroughly
clean the area around the
projector and discard any edible
items placed in that area.
18. Servicing
Do not attempt to service this
product yourself as opening or
removing covers may expose you
to dangerous voltage or other
hazards. Refer all servicing to
qualified service personnel.
Before Using
76
IMPORTANT SAFETY INSTRUCTIONS (Continued)
POWER SUPPLY CORD SELECTION
19. Replacement Parts
When replacement parts are
required, be sure the service
technician has used replacement
parts specified by the
manufacturer or have the same
characteristics as the original part.
Unauthorized substitutions may
result in fire, electric shock, or
other hazards.
(Replacement of the lamp only
should be made by users.)
20. Safety Check
Upon completion of any service or
repairs to this product, ask the
service technician to perform
safety checks to determine that
the product is in proper operating
condition.
21. Do not leave thermalpaper documents or easily
deformed items on top of
the unit or near the air
exhaust for long periods
of time.
The heat from the unit could erase
the information on the thermal
paper, or cause deformation or
warping.
22. Do not use the product in
a closed installation state.
Do not place the product in a box
or in any other closed installation
state. Otherwise it may overheat.
This could result in a risk of fire.
23. Do not look into the laser
If your line voltage is 220 to 240V, use one of the following types of cable.
Plug
configuration
Plug type
EURO
UK
Line voltage
220 – 240V
220 – 240V
light source of the remote
control or direct the laser
pointer toward a person or
a mirror .
The laser beam may cause
damage to the eyes or sight.
Use a 5A fuse which is approved by ASTA
or BSI to BSI362.
Always replace the fuse cover after
changing the fuse.
24. When using a wireless
LAN USB adapter:
IMPORTANT PRECAUTIONS
• Do not use near people
with heart pacemakers
• Do not use near electronic
medical equipment, or in
Save Original Packing Materials
The original shipping carton and packing materials will come in handy if you ever have to
ship your projector. For maximum protection, repack the set as it was originally packed at
the factory.
hospitals or other medical
institutions
• Do not use inside aircraft
or in places where the
wireless LAN USB adapter
could interfere with
electromagnetic signals.
The electromagnetic interference
could cause a malfunction,
resulting in an accident.
25.
If the use of a wireless LAN
USB adapter interferes with
another device’s
electromagnetic signals,
cease use immediately.
The electromagnetic interference
could cause a malfunction,
resulting in an accident.
8 9
Moisture Condensation
Never operate this unit immediately after moving it from a cold location to a warm location.
When the unit is exposed to such a change in temperature, moisture may condense on
the lens and the crucial internal parts. To prevent the unit from possible damage, do not
use the unit for at least 2 hours when there is an extreme or sudden change in tempera-
.
ture
Place and Manner of Installation
• Do not place in hot locations, such as near heating equipment. Doing so could cause
malfunction, and shorten the life of the projector.
•Avoid locations with oil or cigarette smoke. Doing so will dirty the optical parts,
shortening their lives, and darkening the screen.
• Do not use this product in the upright position or tilt it up or down by more than 20° from
level. Doing so may cause a failure or shorten the life of the product.
• Using this instrument near a TV or radio may cause interference to the images or audio
sound. If this happens, move it away from the TV or radio.
•Moving the projector from a low-temperature room to a high-temperature room may
cause condensation on the lens or internal parts in the instrument. If you continue to use
it in that situation, the malfunction may result. Ensure to wait until the condensation
naturally disappears.
• In a high altitude location where air is thin, cooling efficiency is reduced so use the
projector with [Fan mode] set to [High].
p.41
Plug
configuration
Plug type Line voltage
Australian
240V
10A
Switzerland
240V
6A
North American
240V
15A
200 – 240V
200 – 240V
200 – 240V
Before Using
IMPORTANT PRECAUTIONS (Continued)
Avoid Volatile Liquid
Do not use volatile liquids, such as an insect spray, near the unit. Do not leave rubber or
plastic products touching the unit for a long time. They will leave marks on the finish.
If cleaning with a chemically saturated cloth, be sure to follow the product's precautions.
Wireless LAN USB Adapter
• Do not connect the supplied wireless LAN USB adapter to devices other than this unit.
Doing so could cause malfunction.
•To protect the USB adapter from static electricity, touch some nearby metal, such as a
doorknob or aluminum window frame, before touching the USB adapter, to rid your body
of static electricity.
• This USB adapter is a radio product. Concerning the regulations applied in each country/
area, please refer to “Information to the user” supplied.
EXEMPTION CLAUSES
•Toshiba Corporation bears no responsibility in the case of damages arising from natural
disaster such as earthquakes, lightning, etc., fire not liable to Toshiba Corporation, acts
by third parties, other accidents, or use under abnormal conditions including erroneous or
improper operation and other problems.
•Toshiba Corporation bears no responsibility for incidental damages (lost profit, work
interruption, corruption or loss of the memory contents, etc.) arising from the use of or the
inability to use this unit.
•Toshiba Corporation accepts no liability whatsoever for any damages arising from not
having followed the descriptions in this Instruction Manual.
•Toshiba Corporation accepts no liability whatsoever for any damages arising from
malfunctions arising from combination with equipment or software that is not related to
Toshiba Corporation.
•Toshiba bears no responsibility for information being intercepted or leaked due to the use
of a wireless LAN, or any damages therefore.
OTHER CAUTIONS AND INFORMATIONS
Copyrights
Showing or transmitting commercial imaging software or broadcast or cable-broad casting
programs with the purpose of other than the personal and private viewing, including
modifying images using the freeze or resize functions, or displaying with the varying aspect
ratio of the images, could violate the direct or indirect copyrights of the imaging software or
broadcast program, etc., if done without first consulting with the copyright holder . For this
reason, please take appropriate measures before performing one of the actions listed
above, including obtaining a license from the copyright holder.
In the spaces provided below , record the Model and Serial No. located at the bottom of y our
projector.
Model No. Serial No.
Retain this information for future reference.
Disposal
This product contains substances which are harmful to humans and the environment.
• The lamp contains mercury.
Please dispose of this product or used lamps in accordance with local regulations.
Following information is only for EU-member states:
The use of the symbol indicates that this product may not be treated as
household waste. By ensuring this product is disposed of correctly, you will
help prevent potential negative consequences for the environment and
human health, which could otherwise be caused by inappropriate waste
handling of this product. For more detailed information about recycling of this
product, please contact your local city office, your household waste disposal
service or the shop where you purchased the product.
Trademarks
•VGA, SVGA, XGA, SXGA, UXGA are trademarks or registered trademarks of
International Business Machines Corporation.
• Digital Light Processing, Digital Micromirror Device and DMD are trademakes of Texas
Instruments.
• Macintosh is a registered trademark of Apple Computer, Inc.
Windows is a registered trademark of Microsoft Corporation in the U.S. and other countries.
•
• Adobe is a registered trademark and Acrobat Reader is a trademark of Adobe Systems
Incorporated.
Notational Conventions Used in This Manual
• References to pages with related information are annotated as follows.
For example, if making a reference to page 36:
• The illustrations in this document are for reference purposes only and may not reflect
your package exactly.
p.36
REMOTE CONTROL BATTERIES
Caution
•Never throw batteries into a fire.
Using the batteries improperly may cause them to explode or leak and lead to burn or injury. If
battery-leaking fluid contacts skin, wash the fluid off immediately with clean water and consult a
doctor. If the fluid is spilt on an instrument, avoid contact and wipe it off using tissue paper.
(Dispose of the used tissue paper as flammable garbage after moistening with water.)
Notes
• Be sure to use AAA (LR03) size batteries.
• Dispose of batteries in a designated disposal area.
• Attention should be drawn to the environmental aspects of battery disposal.
• Do not mix different battery types or combine used batteries with new ones.
• If the remote control does not operate correctly, or if the operating range becomes
reduced, replace both batteries with new ones.
• If the batteries are dead or if you will not be using the remote control for a long time,
remove the batteries to prevent battery acid from leaking into the battery compartment.
Before Using
10 11
CONTENTS
Before Using
SAFETY PRECAUTIONS.................................................................................. 2
IMPORTANT SAFETY INSTRUCTIONS ........................................................... 4
POWER SUPPLY CORD SELECTION .............................................................. 9
IMPORTANT PRECAUTIONS ........................................................................... 9
EXEMPTION CLAUSES.................................................................................... 10
OTHER CAUTIONS AND INFORMATIONS ...................................................... 10
REMOTE CONTROL BATTERIES .................................................................... 11
CONTENTS ....................................................................................................... 12
Preparations
Checking the package contents......................................................................... 14
Names of each part on the main unit................................................................. 15
Names of each part on the control panel and remote control............................ 16
Label locations................................................................................................... 17
Names of the terminals on the rear panel.......................................................... 18
Preparing and using the remote control............................................................. 19
Operating a computer using the remote control ................................................ 20
Placement .......................................................................................................... 21
Connection......................................................................................................... 22
Operations
Turning the power on and off ............................................................................. 24
Basic operations ................................................................................................ 26
Using handy features......................................................................................... 28
Easy setup...................................................................................................... 28
Using auto setting........................................................................................... 29
Correcting the keystone distortion.................................................................. 29
Resizing image............................................................................................... 30
Cutting off the picture and sound temporarily (Mute) ..................................... 31
Changing picture mode .................................................................................. 31
Changing screen size..................................................................................... 32
Freezing the image (Freeze) .......................................................................... 32
Password function .......................................................................................... 33
Using the menus ................................................................................................ 35
How to use the menus.................................................................................... 35
The image adjustment menu.......................................................................... 36
The display setting menu................................................................................ 38
The default setting menu................................................................................ 41
Displaying Information (Status display) .......................................................... 44
How to use the USB terminal............................................................................. 45
Setting up the wireless LAN............................................................................... 46
Functions........................................................................................................ 46
Communication mode .................................................................................... 46
Caution when using the wireless LAN functions ............................................ 47
Setup using the Setting display (2)................................................................. 48
Setting Wireless Utility .................................................................................... 49
Computer settings .......................................................................................... 53
Projecting images stored in a USB memory ...................................................... 54
USB memories ............................................................................................... 54
Backing up data.............................................................................................. 54
JPEG files....................................................................................................... 54
Setting slideshow options............................................................................... 55
Playing a slide show from a thumbnail list...................................................... 57
Control setting.................................................................................................... 60
The control setting menu................................................................................ 60
Checking the projector status ............................................................................ 61
Status display ................................................................................................. 61
Installing the applications................................................................................... 62
Using the Wireless Utility ................................................................................... 63
Displaying a computer’s screen via the projector ........................................... 63
Displaying a JPEG image saved on a computer via the projector .................. 65
Displaying a video file saved on a computer via the projector ........................ 66
Easy Connect utility........................................................................................ 68
Operating the projector................................................................................... 72
How to use the JPEG Conversion Tool .............................................................. 74
Launching the JPEG Conversion Tool............................................................ 74
Converting an image file................................................................................. 74
Converting files created with Microsoft
Making a presentation with converted JPEG files .......................................... 76
Creating a screen capture and converting it into a JPEG file......................... 76
Setting up the projector using a Web browser ................................................... 77
How to use the “Projector Configuration Tool” ................................................ 77
®
PowerPoint®..................................... 75
Maintenance
About lamp......................................................................................................... 79
Lamp replacement ............................................................................................. 80
Lens and main unit cleaning .............................................................................. 82
Others
Trouble indications ............................................................................................. 83
Before calling service personnel........................................................................ 84
Specifications..................................................................................................... 86
List of general specifications .......................................................................... 86
Separately sold product.................................................................................. 86
List of supported signals (RGB signals) ......................................................... 87
List of supported signals (Y/P
List of supported signals (Video, S-Video signals) ......................................... 88
Pin assignment of COMPUTER 1 IN, COMPUTER 2 IN &
MONITOR terminals....................................................................................... 88
CONTROL terminal ........................................................................................ 89
B/PR signals).................................................... 88
Before Using
1312
Preparations
Checking the package contents
Please make sure that the following items are included in the box, along with the main unit.
If any item is missing, please contact the store immediately where you purchased the
product.
(1) (5) (8)
(2)
(3)
(4)
■■ (1) Remote control
■■ (2) LR03 (SIZE AAA) batteries for remote
control (2)
■■ (3) CD-ROM
■■ (4) Owner’s Manual
(6)
(7)
■■ (6) Power cord
■■ (7) Carrying bag
■■ (8) Mouse remote control receiver
■■ (9) Wireless LAN USB adapter
• “About the Wireless LAN USB
■■ (5) RGB cable (3m)
Note
The shape and number of supplied power cords vary depending on the product destination.
◆The Supplied CD-ROM
The supplied CD-ROM contains the owner’s manual including information not available for
its simplified hardcopy, Owner’s Manual (Getting Started), Acrobat
manual, and application software
■ Installing Acrobat® Reader™
Windows®: Run the CD-ROM, select the Reader/English folder, and run ar500enu.exe.
Follow the on-screen instructions.
Macintosh: Run the CD-ROM, select the Reader/English folder, and run Reader
Installer. Follow the on-screen instructions to install the software.
■ Viewing the manual
Run the CD-ROM and double-click on Start.pdf. Acrobat® Reader™ launches, and the
menu screen of the Owner’s manual appears. Click on your language. The Owner’s
Manual cover and list of bookmarks appear. Click on a bookmark title to view that
section of the manual. Click on
See the Help menu for more information about Acrobat
p.62
to use the functions of the wireless LAN.
p.
to view a reference page with related information.
Adapter”
®
Reader™.
(9)
(See note)
®
Reader™ to view the
Names of each part on the main unit
(4) (6)(7) (8) (9) (10) (11) (12)
(11)(13)
Back Front
Name : Function
(1) AF sensor : Used for Auto focus function.
(2) Infrared remote sensor : Senses commands from the remote control.
(3) Foot adjuster release button : Press to set up or stow the foot adjuster.
(4) Air intake : Draws in air from outside the projector.
(5) Control panel : Operates the projector.
p.16
(6) Antitheft lock hole : Attach a safety cable or any other antitheft device.
(7) Speaker : Outputs audio sound.
(8) Terminals on the rear panel : Connects external devices.
p.18
(9) AC IN socket : Connect the supplied power cord here.
(
10
) Air exhaust : Expels air that has grown hot inside the projector.
11
) Tilt adjuster : Adjusts the projector’s horizontal tilt.
(
(12) Lamp cover : Remove to replace lamp.
p.80
(13)Foot adjuster : Adjusts the vertical projection angle.
p.27
p.27
(14) Lens : Projects expanded image.
(14)
p.19
p.27
(1)(2)(3)(4)(5)
Preparations
1514
Names of each part on the control panel and remote control
Control panel Remote Control
(13)
(14)
(5)(6)(7)
(1)
(2)
(3)
(4)
Laser light
source
(17)
(6)
(16)
(9)
(2)
(10)
(11)
(28)
(27)
(26)
(25)
(24)
(7)
(23)
Remote control
transmitter
(4)
(3)
(15)
(1)
(18)
(19)
(20)
(21)
(22)
(5)
(29)
(30)
(12)
(11)
(10)
(9)
(8)
CAUTION
• Do not look into the laser light
source of the remote control or
direct the laser pointer toward a
person or a mirror.
• Handling and adjusting other than
described here may lead to
dangerous exposure to laser.
Name : Main Function
Control panel
(1) ENTER button : Accepts the selected mode.
(2) MENU button : Displays menus.
(3) KEYSTONE button : Adjusts keystone distortion.
(4) ON/STANDBY button : Turns the power on/off (standby).
(5) FOCUS button : Adjusts the screen focus.
(6) EASY SETUP button : Performs auto-adjustment.
(7) ZOOM button : Adjusts the screen size.
(8) ON/STANDBY indicator : Displays whether power is on or off (standby).
(9) INPUT button : Selects input.
(10) RETURN button : Goes back one screen.
11
) Selection button : Menu selections and adjustments, volume control, etc.
(
p.35
(12) LAMP indicator : Displays lamp mode.
(13) TEMP indicator : Lights when internal temperature is too high.
(14)FAN indicator : Displays cooling fan mode.
p.35
p.29
p.24
p.28
p.24
p.26
p.25
p.83
p.83
Remote control
(1) ENTER button : Accepts the selected mode.
(2) MENU button : Displays menus.
(3) KEYSTONE button : Adjusts keystone distortion.
(4) ON/STANDBY button : Turns the power on/off (standby).
(5) FOCUS button : Adjusts the screen focus.
(6) EASY SETUP button : Performs auto-adjustment.
p.35
p.29
p.24
p.28
Battery
cover
Warning
label
Name : Main Function
(7) ZOOM button : Adjusts the screen size.
(9) INPUT button : Selects input.
p.26
(10) RETURN button : Goes back one screen.
11
) Selection button : Menu selections and adjustments, volume control, etc.
(
p.35
(15) LASER button : Shows a laser pointer.
16
)AUTO SET button : Sets up analog input from computer.
(
p.29
(17) Laser indicator : Lights when laser is on.
18
) Mouse control button : Controls a mouse pointer.
(
(19)PAGE+ button : Proceeds PowerPoint® slides.
(20) MUTE button : Cuts off the picture and sound temporarily.
(21) FREEZE button : Pauses image.
p.32
p.20
p.20
p.31
(22)Ten-Key button : Use as a ten-key pad with wireless LAN, from which
(23)
Remote control ON/OFF switch
(24) PICTURE button : Changes image mode.
(25) SCREEN SIZE button : Changes screen size.
(26) RESIZE button : Enlarges image.
(27)PAGE- button : Goes back PowerPoint® slides.
: Switches on/off the remote control.
p.31
p.32
p.30
p.20
(28) R-CLICK button : Functions as right-click of a mouse.
(29) L-CLICK button : Functions as left-click of a mouse.
numbers and characters can be entered.
p.50
p.20
p.20
p.20
(30) Remote control code switch : Sets the code of remote control to that of the projector.
(inside the battery cover)
p.43
Note
•For the remainder of this manual, buttons are referred to as follows:
Selection buttons ⇒
; ENTER button ⇒
Label locations
Caution – use of controls or adjustments or performance of procedures other than
those specified herein may result in hazardous radiation exposure.
Preparations
1716
Preparing and using the remote controlNames of the terminals on the rear panel
(1)
Name : Main Function
(1) CONTROL terminal : When operating the projector via a computer, connect
(2) MONITOR terminal : Connect to a computer display, etc.
(3) AUDIO IN terminal : Input audio signals from a computer, or from video
(4) COMPUTER 1 IN terminal : Input RGB signal from a computer or other source, or a
(5) AUDIO (L/R) terminal : Input audio signals from video equipment.
(6) S-VIDEO terminal : Input S video signals from video equipment.
(7) USB terminal : Connects the supplied wireless LAN USB adapter or a
(8) AUDIO OUT terminal : Outputs audio signals.
(9) COMPUTER 2 IN terminal : Input analog RGB signal from a computer or other
10
)AUDIO (L/R) terminal : Input audio signals from video equipment.
(
11
) VIDEO terminal : Input video signals from video equipment.
(
(4) (6) (7)(3)(2) (5)
(8) (10) (11)
(9)
this to the controlling computer’s RS-232C port.
equipment with a component video signal output
terminal.
component video signal (Y/P
equipment.
commercial USB memory.
source, or a component video signal (Y/P
video equipment.
B/PR) from video
p.45
p.89
B/PR) from
■ Loading dry-cell batteries
into the remote control
q Remove the battery cover.
■ Operating the remote
control
Turn on the ON/OFF switch of the
remote control.
Point toward the projector’s
infrared remote sensor, and press a
button on the remote control.
• Operating the projector from the front
w Insert the dry-cell batteries.
Be sure to align the plus and minus
ends of the batteries properly.
Two batteries (LR03, SIZE AAA) are
used.
e Replace the battery cover.
When operating the remote control
from behind the projector, the laser
light is reflected on the projecting
surface and may travel a shorter
distance to reach the projector
depending on the shape and material
of the projecting surface.
Approx. 15°
Approx. 5m
Dry-cell batteries
• Before using the batteries, be sure to observe the Safety Precautions described in
previous pages.
• Remove batteries from remote control when not using for extended periods.
• If the remote control stops working, or if its range decreases, replace all the batteries with
new ones.
The remote control
•Turn off the ON/OFF switch of the remote control when not in use or to store in baggage.
• The remote control may fail to operate if the infrared remote sensor is exposed to bright
sunlight or fluorescent lighting.
• Do not drop or bang.
• Do not leave in hot or humid locations.
• Do not get wet or place on top of wet objects.
• Do not take apart.
• In rare cases, ambient conditions could impede the operation of the remote control. If this
happens, point the remote control at the main unit again, and repeat the operation.
Preparations
1918
Operating a computer using the remote control
Placement
A computer can be operated using the projector’s remote control. This function is available
on any computer with the Windows
®
XP OS, that is equipped with a USB port which can support USB1.1 (The mouse
dows
®
98/98SE, Windows® Me, Windows® 2000, or Win-
remote control receiver is also supported on OS 9 or OS X for the Macintosh). However,
please note that Toshiba does not guarantee the operation of all computers.
Connecting a computer
1
Connect the mouse remote control receiver (supplied) to a computer.
The remote control may fail to operate
if the mouse remote control receiver is
To USB port
exposed to bright sunlight or
fluorescent lighting.
In such a case, change position or
direction of the mouse remote control
receiver and retry.
Mouse remote control receiver
Operating a computer
2
Operate remote control’s buttons towards the mouse remote control receiver.
● Moving the mouse pointer
Press the mouse control button in the direction you wish the mouse pointer to move,
then press.
● To left click
Press the L-CLICK button.
● To right click
Press the R-CLICK button.
● To drag and drop
Holding down the L-CLICK button, move the mouse control button until the mouse
pointer is over the desired location, then release the L-CLICK button.
● Using the computer’s page up [↑] and down [↓] function
Press the PAGE+ and PAGE- buttons to switch PowerPoint
Remote Control Front Remote Control Rear
Mouse control
PAGE –
R-CLICK
L-CLICK
PAGE +
®
slides.
Placement Styles
As shown in the figures below, this device can be placed in 4 different styles.
The factory setting is “floor-mounted front projection.” Set the [Projection mode] in the
Default setting menu
p.41
, in accordance with your needs.
Floor-mounted front projection Floor-mounted rear projection
Ceiling-mounted front projection Ceiling-mounted rear projection
WARNING
• Always obey the instructions listed in IMPORTANT SAFETY INSTRUCTIONS when placing the unit.
Attempting to clean/replace the lamp at a high site by yourself may cause you to drop down, thus
resulting in injury.
• If you wish to mount the projector on the ceiling, be sure to ask your dealer to do so. Mounting the
projector on a ceiling requires special ceiling brackets (sold separately) and specialized knowledge.
Improper mounting could cause the projector to fall, resulting in an accident.
• If the projector is ceiling-mounted, install the breaker for turning off the power in case of anomaly. Let
everyone involved with the use of the projector know that fact.
Projection Distance and Size
Use the figures, tables, and formulas below to determine the projection size and projection
distance. (Projection sizes are approximate values for full-size picture with no keystone
adjustment.)
Screen
90°
As seen from above
a (min length) =
a (max length) =
As seen from the side
Lens center
90°
a is the distance (m) between the lens and the screen, and
corresponds to a range of 1.07 m to 11.09 m.
a
2120
projection size (inches) – 1.0437
26.957
projection size (inches) – 0.6246
16.749
projection
size (inches)
30 1.07 1.75
40 1.45 2.35
60 2.19 3.55
80 2.93 4.74
100 3.67 5.93
150 5.53 8.92
200 7.38
250 9.24
300 11.09
projection distance a (m)
min length max length
(zooming max) (zooming min)
–
–
–
Preparations
Connection
Before connection
• Read the owner’s manual of the device you are connecting to the projector.
• Some types of computer cannot be used or connected to this projector.
Check for an RGB output terminal, supported signal
•Turn off the power of both devices before connecting.
• The figure is a sample connection. This does not mean that all of these devices can or
must be connected simultaneously. (Dotted lines mean items can be exchanged.)
To
RS-232C
terminal
Computer
(for control)
p.89
Control cable
Computer
To audio
output
Audio cable
(not supplied)
To RGB
Audio cable
output
(not supplied)
RGB cable
(supplied)
To audio
output
p.87
Computer
, etc.
To RGB
output
RGB cable
(not supplied)
Video recorder,
DVD player, etc.
To audio
output
White (L)/
Red (R)
Audio cable
(not supplied)
To S-video
output
S-video cable
(not supplied)
Notes
• The COMPUTER 1 IN terminal functions identically to the COMPUTER 2 IN terminal.
• The MONITOR OUT terminal outputs signals from the COMPUTER 1 IN terminal or the
COMPUTER 2 IN terminal, or outputs Y/P
input is selected, the MONITOR OUT terminal outputs the input signals last selected for
each input terminal
• Signals are output from MONITOR OUT terminal even in standby mode.
However, from AUDIO OUT terminal, no audio signal is output.
•A computer monitor cannot accept Y/P
• The AUDIO IN terminal doubles for devices connected to COMPUTER terminals 1 and 2.
• When an AUDIO OUT terminal is connected, sound is not output from the projector
speaker.
• Output volume of AUDIO OUT terminal can be adjusted by the VOL button.
•Moving pictures played back on computers using DVD software may appear unnatural if it
is projected with this projector, but it is not a malfunction.
B/PR as selected with the INPUT button. If no
B/PR signals correctly.
Preparations
Audio cable
(not supplied)
Audio cable
(not supplied)
To audio
To audio input
White (L)/Red (R)
Audio amplifier, etc. DVD video recorder, etc.
output
Monitor cable Mini
D-sub 15P-BNC
(not supplied)
To Y/CB/CR
output
Green (Y)/Blue
(C
B)/Red (CR)
Conversion
adapter BNC-pin
(not supplied)
To audio output
White (L)/Red (R)
Video recorder, etc.
AV cable
(not supplied)
To video
output
2322
Operations
Turning the power on and off
■ Connecting the power cord
Insert the power cord connector into
1
the AC IN socket of the projector.
Insert the power cord plug into a
2
wall or other power outlet.
The ON/STANDBY indicator will
change to orange, indicating standby
mode.
Power cord connector
(Supplied)
■ Removing the lens cover
Be sure to remove the lens cover when the power is
turned on. If it is left on, it could become deformed due
to heat.
■ Turning the power on
Press the ON/STANDBY
Control panel
Remote
Control
Start-up screen
button.
The power turns on, and the following
3 green indicators light: ON/STANDBY,
LAMP, and FAN. After a moment, the
start-up screen appears.
CAUTION
• Do not look into the lens while the lamp is on. The strong light from the lamp may cause
damage to your eyes or sight.
• Do not block the air intake or exhaust. Doing so could cause a fire due to internal overheating.
• Do not place your hands, face, or other objects near the air exhaust. Doing so could cause
burns, deform/break the object.
Notes
• The start-up screen will disappear after a moment. You can dismiss the start-up screen
before this by performing any operation. You can also configure the start-up screen not to
appear via the Display setting menu
• The first time you use the projector after purchase, after the start-up screen disappears,
the start menu is displayed
• When [Key lock] is [On], the operation buttons of the projector do not work
• When [Password] is [On], enter password then the start-up screen is displayed after the
Passw ord entry screen disappears
p.26
p.38
.
.
p.33
.
p.43
.
■ Turning the power off
Press the ON/STANDBY button.
1
A message appears on the screen, confirming that you wish to shut off the power. This
message will disappear after a moment. (This operation is no longer valid after the
message disappears.)
Press the ON/STANDBY button again.
2
The screen turns off, but the internal cooling fan continues to operate for a short while.
Then, the projector goes into standby mode.
When cooling lamp During internal cooling After cooling complete
A B C
During cooling, the LAMP indicator flashes. In this state, the power cannot be
A
turned back on.
If you are in a hurry, there is no problem with unplugging the power cord in this
state.
After the LAMP indicator goes off, the FAN indicator keeps lighted and the
B
cooling fan continues to operate for a short while, in order to expel excess
internal heat.
In standby mode
C
Note
• The projector consumes about 9W of power in standby. We recommend that you unplug
the power cord if you will not be using the projector for an extended period.
(When [Wireless standby] is [On], it consumes about 12W during standby.)
PRECAUTION
• If the power cord is unplugged before cooling is complete, give the lamp time (about 5
minutes) to cool before plugging it back in. If the lamp overheats, it may fail to light.
Operations
24
25
Basic operations
Turn on the power.
1
Turn on the power by following the instructions in “Turning the power on”
The Easy setup function works to automatically adjust the screen focus and correct the
keystone distortion. If RGB signals are input, auto-setting is also made. This operation
does not take place when [Easy setup] in the Default setting menu is [Off]
2
Select the language and the lamp power (When using the
first time).
When the projector is used for the first time after purchase, the start menu for language (to display the menus and messages on the screen) and lamp power selection
and configuration is displayed in English. (If the screen is out of focus, adjust it
according to the step
q Use the or button to select the
desired language and press the
Message for setup confirmation is displayed in a
selected language.
Then, the menu for lamp power selection and
configuration is displayed. It is automatically set as
Standard. T o change the setting, follow the step w.
w Use the or button to select the lamp
power and press the
The lamp power, if selected, will be toggled without
pressing the
disappears in a few seconds.
Notes
• When the projector is turned on the next time, the start menu does not appear upon
startup. However, if [Reset all] is executed from the Default setting menu
start menu will be displayed the next time when the power is turned on.
• The language can also be set via the Display setting menu
via the Default setting menu
• This owner’s manual assumes that English has been selected.
Activate the connected device.
3
Turn on and start the connected device such as a computer.
Press the INPUT button.
4
An image of the connected equipment is projected.
Each time you press the INPUT button, it switches to the input of the connected
equipment that is outputting video signals.
Notes
• When [Auto input search] is set to [Off] in the Default setting menu
setting is [On]), the Input select menu appears if you press the INPUT button
• If no signal is being output from the connected equipment, pressing the INPUT button
does not change the input and “There is no other input signal.” will appear.
.)
6
button.
button.
button. The display automatically
p.41
.
26
p.38
p.24
.
p.41
.
English
French
German
Italian
Spanish
Portuguese
Russian
Swedish
Turkish
Polish
Japanese
Chinese (simplified)
Chinese (traditional)
Korean
p.41
and Lamp power
p.41
(factory
p.42
.
, the
5
Projector placement angle adjustments
The placement angle and the height of the projected image can be adjusted by the foot
adjuster.
q Lift up the front of the projector to
1
the desired angle, then press the
foot adjuster release button.
The foot adjuster extends. Release the
button to lock the position.
w To fine adjust the angle, twist the
3
foot adjuster.
e To adjust the horizontal angle, use
the right and left tilt adjusters.
•To stow the foot adjuster, hold up the projector while pressing the foot adjuster
release button, then slowly lower the projector.
Adjusting the screen size and focus
6
q
Use the ZOOM button to adjust the screen size.
w
Use the FOCUS button to adjust the screen focus.
Adjusting the volume with the
7
3
Control panel
2
Remote
Control
buttons
The speaker volume can be adjusted when an audio signal is being input.
Notes
• While a text entry screen (e.g., the Password entry screen) is displayed, the remote
control’s FOCUS and ZOOM buttons function as numeric keys, and therefore cannot be
used to adjust the screen size or focus. In such a case, use the FOCUS and ZOOM
buttons on the projector to make adjustment or retry after quitting the text entry screen.
• Note that lamp characteristics may rarely cause the brightness to fluctuate slightly.
•A lamp is consumable item. If used for extended periods, images will appear dark, and
the lamp could burn out. This is characteristic of a lamp, and is not malfunction. (The
lifetime of the lamp depends on conditions of use.)
• The DMD
(pixels that do not light) or bright spots (pixels that are constantly lit) on the panel. Please
note that these are not malfunctions.
• Although this projector supports a wide range of RGB signals
supported by this projector (XGA) will be expanded or shrunk, which will affect image
quality slightly. To view high-quality images, it is recommended that the computer’s
external output should be set to XGA resolution.
• With some models of computer having LCD displays or the like, displaying images
simultaneously on the projector and the monitor’s display may prevent the images from
displaying properly. If this happens, turn off the computer’s LCD display. For information
on how to turn off the LCD display, see the owner’s manual of your computer.
• If no signal is being input from the connected equipment or signal input is stopped while
projecting, the “No signal” will appear.
• If a signal not supported by the projector is input, the “Unsupport signal” will appear.
• If an unavailable operation button is pressed, the
TM
is made using extremely advanced technology, but there may be black spots
p.87
, any resolutions not
icon will appear.
27
Operations
Loading...