TD62304,305P/AP/F/AF
TOSHIBA BIPOLAR DIGITAL INTEGRATED CIRCUIT SILICON MONOLITHIC
TD62304P,TD62304AP,TD62304F,TD62304AF
TD62305P,TD62305AP,TD62305F,TD62305AF
7CH LOW ACTIVE DARLINGTON SINK DRIVER
The TD62304P/AP/F/AF and TD62305P/AP/F/AF are
non−inverting transistor arrays, which are comprised of eight
NPN darlington buffer-transistor output stages and PNP input
stages.
These devices can be operated by source input voltage and are
suitable for operations with a 5-V general purposed logic IC such
as 5-V TTL, 5-V CMOS and 5-V Microprocessor which have sink
current output drivers.
Please observe the thermal condition for using.
FEATURES
l Output current (single output) 500 mA (Max.)
l High sustaining voltage 35 V (TD62304P/F, 62305P/F) 50 V
(TD62304AP/AF, 62305AP/AF) (Min.)
l Low level active input
l Input compatible with 5-V TTL and 5-V CMOS
l Package type-P, AP: DIP-16 pin
l Package type-F, AF: SOP-18 pin
PIN CONNECTION
(TOP VIEW)
Weight
DIP16−P−300−2.54A : 1.11 g (Typ.)
SOP16−P−225−1.27 : 0.16 g (Typ.)
SCHEMATICS
(EACH DRIVER)
TD62034P/AP/F/AF TD62305P/AP/F/AF
Note: The input and output parasitic diodes cannot be used as clamp diodes.
1
2001-07-16
TD62304,305P/AP/F/AF
MAXIMUM RATINGS
CHARACTERISTICS SYMBOL RATING UNIT
Supply Voltage V
Output Sustaining Voltage
Output Current I
Input Voltage V
Input Current I
Power Dissipation
Operating Temperature
Storage Temperature T
(Ta = 25°C)
P, F −0.5~35
AF −0.5~50
AP
P 1.0
AP 1.47
F, AF
P −30~75
CC
V
CE (SUS)
OUT
IN
IN
PD
T
opr
stg
Note 1: TD62305P / AP / F / AF
Note 2: On glass epoxy PCB (30 × 30 × 1.6 mm Cu 50%)
−0.5~7.0 V
V
−0.5~50
500 mA / ch
−22~VCC +0.5
−0.5~7 (Note 1)
−10 mA
0.625 (Note 2)
−40~85
−55~150
V
W
°C
°C
2
2001-07-16
RECOMMENDED OPERATING CONDITIONS
(Ta = −40~85°C and Ta = −30~75°C for only Type−P)
CHARACTERISTIC SYMBOL CONDITION MIN TYP. MAX UNIT
TD62304,305P/AP/F/AF
Supply Voltage V
P, F 0 ― 35
Output Sustaining Voltage
Output Current
Input Voltage
Power Dissipation
TD62304P / AP / F / AF −20 ― V
TD62305P / AP / F / AF
AF 0 ― 50
AP
DC 1 Circuit 0 ― 350
P
AP
P ― ― ― 0.44
AP ― ― ― 0.52
F, AF
CC
V
CE (SUS)
I
OUT
V
IN
P
D
Note 1: On glass epoxy PCB (30 × 30 × 1.6 mm Cu 50%)
ELECTRICAL CHARACTERISTICS
(Ta = 25°C)
T
= 25 ms, duty = 10%
pw
7 circuits
T
= 25 ms, duty = 10%
pw
7 circuits
T
= 25 ms, duty = 20%
pw
7 circuits
― 4.5 5.0 5.5 V
―
―
0 ― 50
0 ― 300
0 ― 350
0 ― 200
CC
0 ― 5.5
(Note 1) ― ― 0.325
V
mA / ch
V
W
CHARACTERISTIC SYMBOL
Output Leakage
Current
Output Saturation Voltage V
Input Current
Input Voltage
(Output On)
Supply Current
Turn−On Delay
Turn−Off Delay
P / F
(Output On) I
(Output Off) I
TD62304 ― ―
TD62305
(Output On) I
(Output Off) I
P, F
AP, AF
P, F
AP, AF
TEST
CIR−
CUIT
I
CEX
CE (sat)
IN (ON)
IN (OFF)
V
IN (ON)
CC (ON)
CC (OFF)
tON
t
OFF
1
2
3
4 ― ― ― −40 µA
5 ―
6 V
6 V
7
TEST CONDITION MIN TYP. MAX UNIT
= 35 V
V
OUT
V
CC
V
IN
V
CC
I
OUT
V
CC
V
CC
CC
CC
V
CC
C
L
= 5.5 V
= 0 V
= 4.5 V
= 350 mA
= 5.5 V, V
= 5.5 V, V
= 5.5 V, V
= V
IN
= 5 V,
= 15 pF
Ta = 75°C
= 50 V
V
OUT
Ta = 85°C
= V
V
IN
IN (ON)
MAX.
= 0.4 V ― −0.32 −0.45
IN
= −20 V ― ― −2.6
IN
= 0 V ― 17 22 mA
IN
= 5.5 V ― ― 100 µA
= 35 V
V
OUT
R
= 87.5 Ω
L
= 50 V
V
OUT
R
= 125 Ω
L
= 35 V
V
OUT
R
= 87.5 Ω
L
V
= 50 V
OUT
R
= 125 Ω
L
― ― −100 µA
― 1.4 2.0 V
― ―
― 0.1 ―
― 3 ―
V
CC
−2.8
V
CC
−3.7
mA
V
µs
3
2001-07-16
TEST CIRCUIT
TD62304,305P/AP/F/AF
1. I
3. I
5. V
2. hFE, V
CEX
IN (ON)
6. ICC
IN (ON)
4. I
CE (sat)
IN (OFF)
7. tON, t
Note 1: Pulse Width 50 µs, duty cycle 10%
Note 2: C
OFF
Output impedance 50 Ω, t
includes probe and jig capacitance.
L
r
≤ 10 ns, tf ≤ 5 ns
PRECAUTIONS for USING
This IC does not include built-in protection circuits for excess current or overvoltage.
If this IC is subjected to excess current or overvoltage, it may be destroyed.
Hence, the utmost care must be taken when systems which incorporate this IC are designed.Utmost care is
necessary in the design of the output line, V
between outputs, air contamination fault, or fault by improper grounding.
and GND line since IC may be destroyed due to short−circuit
CC
4
2001-07-16
TD62304,305P/AP/F/AF
5
2001-07-16
TD62304,305P/AP/F/AF
6
2001-07-16
TD62304,305P/AP/F/AF
PACKAGE DIMENSIONS
DIP16−P−300−2.54A Unit : mm
Weight: 1.11 g (Typ.)
7
2001-07-16
TD62304,305P/AP/F/AF
PACKAGE DIMENSIONS
SOP16−P−225−1.27 Unit : mm
Weight: 0.16 g (Typ.)
8
2001-07-16
TD62304,305P/AP/F/AF
A
RESTRICTIONS ON PRODUCT USE
· TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc..
· The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this
document shall be made at the customer’s own risk.
· The products described in this document are subject to the foreign exchange and foreign trade laws.
· The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other
rights of the third parties which may result from its use. No license is granted by implication or otherwise under
any intellectual property or other rights of TOSHIBA CORPORATION or others.
000707EB
· The information contained herein is subject to change without notice.
9
2001-07-16
Loading...