TOSHIBA TD62107P, TD62107BP, TD62107F Technical data
TD62107P/BP/F
TOSHIBA BIPOLAR DIGITAL INTEGRATED CIRCUIT SILICON MONOLITHIC
TD62107P,TD62107BP,TD62107F
4CH HIGH−CURRENT DARLINGTON SINK DRIVER
The TD62107P / BP / F are high−voltage, high−current darlington
drivers and enable inputs which can gate the outputs. All units
feature integral clamp diodes for switching inductive loads.
The TD62107P / BP / F have a wide supply voltage range and all
input are compatible with TTL and 5−V CMOS.
Application include relay, hammer, lamp and stepping moter
drivers.
Please observe the thermal condition for using.
FEATURES
l Output current (single output) 750mA (MAX)
l High sustaining voltage output 80 V MIN. (TD62107BP)
45 V MIN. (TD62107P)
35 V MIN. (TD62107F)
l Output clamp diodes
l Enable inputs E1, E2
l Wide supply voltage range VCC = 4.75~17 V
l Input compatible with TTL and 5−V CMOS
l GND terminal = heat sink
l Package type−P, BP : DIP−16pin
l Package type−F : HSOP−16pin
PIN CONNECTION
(TOP VIEW)
Weight
DIP16−P−300−2.54A : 1.11 g (Typ.)
HSOP16−P−300−1.00 : 0.50 g (Typ.)
TD62107P / TD62107BP TD62107F
1
2001-07-16
TD62107P/BP/F
SCHEMATICS
(EACH DRIVER)
TRUTH TABLE
E1 E2 I1 ~ I4 O1~O4
L L L or H Disable OFF
L H L or H Disable OFF
H L L or H Enable In
H H L or H Disable OFF
In = I1 ~ I4
INPUT EQUIVALENT CIRCUIT OUTPUT EQUIVALENT CIRCUIT
Note: The input and output parasitic diodes cannot be
used as clamp diodes.
MAXIMUM RATINGS
CHARACTERISTIC SYMBOL RATING UNIT
Supply Voltage VCC −0.5~17 V
Output Sustaining Voltage
Output Current I
Input Voltage VIN −0.5~V
Clamp Diode Reverse Voltage
Clamp Diode Forword Current
Power Dissipation
Operating Temperature T
Storage Temperature T
(Ta = 25°C)
P −0.5~45
BP −0.5~80
F
P 45
BP 80
F
P, F 500
BP
P, BP 2.7 (Note 1)
F
V
CE (SUS)
−0.5~35
OUT
VR
I
F
P
D
opr
−55~150 °C
stg
750 mA
+ 0.5 V
CC
35
750
1.4 (Note 2)
−40~85 °C
V
V
mA
W
Note 1: On Glass Epoxy PCB (50 × 50 × 1.6 mm Cu 50%)
Note 2: On Glass Epoxy PCB (60 × 30 × 1.6 mm Cu 30%)
2
2001-07-16
TD62107P/BP/F
RECOMMENDED OPERATING CONDITIONS
CHARACTERISTIC SYMBOL CONDITION MIN TYP. MAX UNIT
Supply Voltage V
P 0 ― 45
Output Sustaining
Voltage
BP 0 ― 80
F
P, F Tpw = 25ms, Duty = 75%, 1 Circuit 0 ― 500
Output Current
BP Tpw = 25ms, Duty = 10%, 4 Circuits 0 ― 750
P, BP Duty = 30% 0 ― 400
F
Input Voltage V
P ― ― 45
Clamp Diode
ReverseVoltage
BP ― ― 80
F
Clamp Diode
Forward Current
Power Dissipation
P, F ― ― 500
BP
B, BP ― ― 1.0
F
CC
V
CE (SUS)
I
OUT
V
I
P
Tpw = 25ms, 4 Circuits
IN
R
F
D
Ta = 85°C (Note) ― ― 0.7
(Ta = −40~85°C)
4.75 ― 15 V
Duty = 40% ― ― 300
0 ― VCCV
V
0 ― 35
mA
V
― ― 35
mA
― ― 750
W
Note: On Glass Epoxy PCB (60 × 30 × 1.6 mm Cu 30%)
3
2001-07-16
Loading...