CONFIDENTIAL
Service Bulletin
18 Park Way, Upper Saddle River, NJ 07458
No. 006R1
Date:
_____________________________________________________________
Model: TA-RW255
Subject: No Sound output from Deck “B” after switching from Deck “A”.
Symptom: No Sound output from Deck “B” after switching from Deck “A”. The
symptom is the result of a programming error in the original Microprocessor.
Solution:
Microprocessor has been replaced add the letter “A” to the end of the units Serial
Number. Note: If version 1.00 is installed into a set that originally had version 1.01 the
following error will occur: After Deck A is switched to Deck B in Continuous tape
playback mode, sound will not be produced from Deck B.
Replace the Microprocessor with the improved version. After the
Parts:
FORMER NEW Ref #
Description Part Number Description Part
Q701 MPD78042FGF-
140-3B9
22242245R3 MPD78042FGF-
141-3B9
September 2, 2005
Number
22242284R3
______________________________________________________________________________________
This document and the information it contains is intended for the exclusive use of Authorized ONKYO Service Centers and their
employees. This document may contain information that is privileged, confidential and exempt from disclosure under applicable law
and terms of the ONKYO Service Agreement. Any dissemination, distribution or copying of this document and the information it
contains is strictly prohibited.
CONFIDENTIALITY NOTICE: