Toshiba T5435-48 User Manual

Download

ON-LINE MANUAL

48T543*DG

LED Backlight LCD TV

During the life of your TV rmware updates will be made available to

ensure that your TV maintains optimum performance.

You can download the latest version of rmware from

www.toshiba-om.net/rmware.php

Some features listed in this document are limited due to local legislation

and may not be available in all countries.

Contents

Safety Precautions ................................................. 4

English

Air Circulation ..................................................... 4

Heat Damage...................................................... 4

Mains Supply ...................................................... 4

Warning .............................................................. 4

Do ....................................................................... 4

Do not ................................................................. 4

Installation and Important Information .................... 5

EXCLUSION CLAUSE........................................ 5

Important safety information ................................... 6

Fitting or Removing the pedestal stand .................. 7

The Remote Control ............................................... 8

Inserting Batteries and Effective Range of the

Remote Control................................................... 8

Connecting External Equipment ............................. 9

Connecting an HDMI® or DVI Device to the HDMI

Input...................................................................... 10

To Connect an HDMI Device ............................ 10

To Connect a DVI Device.................................. 10

Connecting a Computer.........................................11

To Connect a Computer .....................................11

Connecting to a DVD Player via YPbPr .............11

Connecting a USB Memory ...................................11

To Connect a USB Flash Drive ..........................11

Connecting a home network ................................. 12

Power Save Mode ................................................ 13

Environmental Information ............................... 13

Controlling the TV ................................................. 14

Switching on ..................................................... 14

Using the Remote Control ................................ 14

Using the Controls on the TV ............................ 14

Initial Installation ................................................... 15

Auto Tuning .......................................................... 17

Auto Tuning....................................................... 17

Auto Channel Scan Menu Operation ................ 17

Manual Tuning, Analogue Fine Tuning ................. 18

Digital Aerial Manual Search............................. 18

Digital Cable Manual Search ............................ 18

Analogue Manual Search ................................. 18

Analogue Fine Tune.......................................... 18

Clear Service List (*) ......................................... 18

General Operation ................................................ 19

Stereo and Bilingual Transmissions.................. 19

Displaying Subtitles .......................................... 19

Viewing Main Menu .......................................... 19

Controlling Volume and Muting Sound ............. 19

Selecting Programme Positions........................ 19

Standby Notications ........................................ 19

Channel List, Sorting Programmes, Programme

Locking ................................................................. 20

Viewing Channel List ........................................ 20

Moving a Channel ............................................. 20

Deleting a Channel ........................................... 20

Renaming a Channel ........................................ 20

Locking a Channel ............................................ 20

Viewing Info Banner, Electronic Programme

Guide .................................................................... 21

Viewing Info Banner .......................................... 21

Electronic Programme Guide............................ 21

Language Selection .............................................. 22

Language Settings ............................................ 22

Preferred ....................................................... 22

Current .......................................................... 22

Digital Settings - Parental Control, Menu Lock, Set

PIN........................................................................ 23

Viewing Parental Control Menu ........................ 23

Menu Lock ........................................................ 23

Maturity Lock .................................................... 23

Child Lock ......................................................... 23

Set PIN ............................................................. 23

Conguring Picture Settings ................................. 24

Conguring Picture Settings ............................. 24

Operating Picture Settings Menu Items ............ 24

3D Settings ....................................................... 24

Mode ................................................................. 24

Contrast ............................................................ 24

Brightness ......................................................... 24

Sharpness......................................................... 24

Colour ............................................................... 24

Power Save Mode ............................................ 24

Backlight ........................................................... 24

Noise Reduction ............................................... 24

Advanced Settings ........................................ 24

Reset ................................................................ 25

Changing Picture Format...................................... 26

Conguring PC Picture Settings ........................... 27

PC Picture Settings (*) ...................................... 27

PC Picture controls ........................................... 27

PC Position ....................................................... 27

Autoposition ...................................................... 27

H Position ......................................................... 27

V Position.......................................................... 27

Dot Clock .......................................................... 27

Phase................................................................ 27

Conguring Sound Settings .................................. 28

Conguring Sound Settings .............................. 28

Operating Sound Settings Menu Items ............. 28

Volume .............................................................. 28

Equalizer (Only for speaker) ............................. 28

Balance (Only for speaker) ............................... 28

Headphone ....................................................... 28

Sound Mode ..................................................... 28

AVL ................................................................... 28

Headphone/Lineout .......................................... 28

Dynamic Bass ................................................... 28

Surround Sound................................................ 28

Digital Out ......................................................... 28

Settings Menu Operation, Conditional Access ..... 29

Conguring Your TV’s Settings ......................... 29

English - 2 -

Contents

Viewing Settings Menu ..................................... 29

Using a Conditional Access Module ................. 29

Viewing Conditional Access Menu (*) ............... 29

Setting Timers....................................................... 30

Timers ............................................................... 30

Setting Sleep Timer .......................................... 30

Setting Programme Timers ............................... 30

Adding a Timer.................................................. 30

Editing a Timer .................................................. 30

Deleting a Timer................................................ 30

Recording Conguration ....................................... 31

Recording Conguration ................................... 31

Setting Date/Time ................................................. 32

Conguring Date/Time Settings ........................ 32

Conguring Source Settings ............................. 32

Input Selection .................................................. 32

Other Controls ...................................................... 33

Conguring Other Settings - General ............... 33

Operation .......................................................... 33

Menu Timeout ................................................... 33

Scan Encrypted Channels ............................... 33

Hbb TV .............................................................. 33

Blue Background .............................................. 33

Software Upgrade ............................................. 33

Application Version ........................................... 33

Hard of Hearing ................................................ 33

Audio Description.............................................. 33

Auto TV Off ....................................................... 34

Standby Search (optional) ............................... 34

Store Mode ....................................................... 34

Media Renderer ................................................ 34

Power Up Mode ................................................ 34

Virtual Remote .................................................. 34

CEC .................................................................. 34

CEC Auto Power On ......................................... 34

Network Settings, Portal, Internet Browser and

YouTube ............................................................... 35

Conguring Network Settings ........................... 35

First enter to Toshiba Portal .............................. 35

Using the Toshiba Portal ................................... 35

Using the Internet Browser ............................... 35

Using YouTubeTM .............................................. 36

Using 3D Feature ................................................. 37

Operating the 3D Mode “3D” ......................... 37

LITHIUM BATTERY CAUTION ......................... 37

Using the 3D Eyewear ...................................... 37

Viewing 3D images ........................................... 37

Changing 3D format from the Quick menu ....... 37

Watching 3D images in 2D format .................... 37

Watching 2D images in 3D format .................... 37

Switching left and right images ......................... 37

3D Settings ....................................................... 38

3D Viewing Information ..................................... 38

USB Record Feature ............................................ 40

Instant Recording.............................................. 40

English - 3 -

Timeshift Recording .......................................... 40

Watching Recorded Programmes .................... 40

Slow Forward .................................................... 40

About the USB Record Feature ........................ 40

Using Media Browser ........................................... 41

Manual Start ..................................................... 41

Auto Start .......................................................... 41

Playing MP3 Files ............................................. 42

Viewing JPEG Files .......................................... 42

Slideshow Feature ............................................ 43

Video Playback ................................................. 43

Recordings........................................................ 44

Media Browser Settings .................................... 44

Using MENU button in Media Browser Mode ... 45

To Close the Media Player ................................ 45

Analogue Only Text Services ................................ 46

Analogue Text Services .................................... 46

Using Text Button -TEXT .................................. 46

Acessing Sub-Pages ........................................ 46

Revealing Concealed Text ................................ 46

Holding a Page ................................................. 46

To display an initial page................................... 46

Appendix A: PC Input Typical Display Modes ....... 47

Appendix B: AV and HDMI Signal Compatibility

(Input Signal Types) .............................................. 48

Appendix C: PIN Information ................................ 49

Appendix D: Supported File Formats for USB

Mode..................................................................... 50

Cautions for 3D..................................................... 51

Important information for 3D viewing ................ 51

Cautions and Other Information for 3D................. 52

Notes on watching the TV ................................. 52

Specications and Accessories ............................ 53

License Information .............................................. 54

Q & A Section ....................................................... 55

English

Safety Precautions

This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment,

English

care must be taken to obtain the best results and for safety to be assured. Please read the points below for your own safety. They are of a general nature, intended to help with all electronic consumer products.

Air Circulation

Leave more than 10cm around all edges when wall mounting the television to allow adequate ventilation. This will prevent overheating and possible damage to the television. Dusty places should also be avoided.

Heat Damage

Damage may occur if the television is left in direct sunlight or near a heater. Avoid places subject to extremely high temperatures or humidity, or locations where the temperature is likely to fall below 5°C (41°F).

Mains Supply

The set should be operated only from a 220-240 V AC 50 Hz outlet. DO ensure that the television is not standing on the mains lead. DO NOT cut off the mains plug from this equipment, this incorporates a special Radio Interference Filter, the removal of which will impair its performance. It should only be replaced by a correctly rated and approved type. IF IN DOUBT PLEASE CONSULT A COMPETENT ELECTRICIAN.

Warning

To prevent the spread of re, keep candles or other open ames away from this product at all times.

Do not

DON’T remove any xed cover as this may expose dangerous voltages.

DON’T obstruct the ventilation openings of the equipment with items such as newspapers, tablecloths, curtains, etc. Overheating will cause damage.

DON’T allow electrical equipment to be exposed to dripping or splashing or objects lled with liquids.

DON’T place hot objects or naked ame sources, such as lighted candles or nightlights on, or close to equipment. High temperatures can melt plastic and lead to res.

DON’T use makeshift stands and use the stand manufacturers supplied screws.

DON’T leave equipment switched on when it is unattended, unless it is specically stated that it is designed for unattended operation or has a standby mode. Switch off by withdrawing the plug, make sure your family know how to do this. Special arrangements may need to be made for people with disabilities.

DON’T continue to operate the equipment if you are in any doubt about it working normally, or it is damaged in any way

- switch off, withdraw the mains plug and consult your dealer.

WARNING - excessive sound pressure from earphones or headphones can cause hearing loss.

ABOVE ALL - NEVER let anyone, especially children, push or hit the screen, push anything into holes, slots or any other openings in the case.

NEVER guess or take chances with electrical equipment of any kind - it is better to be safe than sorry.

THE MAINS PLUG IS USED AS A DISCONNECTING DEVICE AND THEREFORE SHOULD BE READILY OPERABLE.

DO read these operating instructions before you attempt to

use the equipment.

DO ensure that all electrical connections (including the mains plug, extension leads and inter connections between pieces of equipment) are properly made and in accordance with the manufacturers’ instructions. Switch off and withdraw the mains plug before making or changing connections.

DO consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment.

DO be careful with any glass panels or doors on equipment.

English - 4 -

Note: Interactive video games that involve shooting a “gun” type of joystick at the on-screen target may not work with this TV.

The illustrations and the OSD in this operation manual are for explanation purposes and may vary slightly from the actual operations.

Installation and Important Information

Where to install

* Button and stand style is dependent on model.

Locate the television away from direct sunlight and strong lights. Soft, indirect lighting is recommended for comfortable viewing. Use curtains or blinds to prevent direct sunlight falling on the screen.

Place the TV on a stable, level surface that can support the weight of the TV. In order to maintain stability and prevent it falling over, its recommended to secure the TV to a wall using a sturdy tie on the back of the stand. The LCD display panels are manufactured using an extremely high level of precision technology; however, sometimes some parts of the screen may be missing picture elements or have luminous spots. This is not a sign of a malfunction. Make sure the television is located in a position where it cannot be pushed or hit by objects, as pressure will break or

Please take note

The digital reception function of this television is only effective in the countries listed in the “Country” section during the rst time installation menu. Depending on country/area, some of this television’s functions may not be available. Reception of future additional or modied services cannot be guaranteed with this television.

If stationary images generated by 4:3 broadcasts, text services, channel identication logos, computer displays, video games, on screen menus, etc. are left on the television screen for any length of time, they could become conspicuous. It is always advisable to reduce both the brightness and contrast settings.

Very long, continuous use of the 4:3 picture on a 16:9 screen may result in some retention of the image at the 4:3 outlines. This is not a defect of the LCD TV and is not covered under the manufacturer’s warranty. Regular use of other size modes will prevent permanent retention.

EXCLUSION CLAUSE

Toshiba shall under no circumstances be liable for loss and/or damage to the product caused by:

i) re;

ii) earthquake;

iii) accidental damage;

iv) intentional misuse of the product;

v) use of the product in improper conditions;

vi) loss and/or damage caused to the product whilst in the possession of a third party;

vii) any damage or loss caused as a result of the owner ’s failure and/or neglect to follow the instructions set out in the

owner’s manual;

viii) any loss or damage caused directly as a result of misuse or malfunction of the product when used simultaneously with

associated equipment;

Furthermore, under no circumstances shall Toshiba be liable for any consequential loss and/or damage including but not limited to the following, loss of prot, interruption of business, the loss of recorded data whether caused during normal operation or misuse of the product.

damage the screen. Also, please ensure that small items are not inserted into slots or openings in the case.

Avoid using chemicals (such as air refreshers, cleaning agents, etc.) on or near the TV pedestal.

Studies indicate that plastics may weaken and crack over time from the combination effects of chemical agents and mechanical stress (such as weight of TV). Failure to follow these instructions could result in serious injury and/or permanent damage to TV and TV pedestal. Cleaning the screen and cabinet… Turn off the power, and clean the screen and cabinet with a soft, dry cloth. We recommend that you do not use any proprietary polishes or solvents on the screen or cabinet as this may cause damage.

English

English - 5 -

Important safety information

• Any function related to the digital television (with the DVB logo) is available only within the country or area

English

where such signals are transmitted. Verify with the salesperson if it is possible to receive a DVB - T/C signal in the area where you live.

• Even if the television conforms to the required DVB - T/C specications, the compatibility with future digital DVB - T/C transmissions is not guaranteed.

• Some digital television functions may not be available in certain countries.

• The DVB - T/C system present in this device, allows reception of both FTA (Free To Air) and Encrypted channels.

• Note; Encrypted channels require a specic encryption system to view, which may not be available in certain countries.

• DVB is a registered trademark of the DVB Project. The DVB logo indicates that the product is compliant with European Digital Broadcasting.

IMPORTANT INFORMATION

TV Installation

• Do not stand the televisions on cloth or other materials placed between the television and supporting furniture.

• Educating children about the dangers of climbing on furniture to reach the television or its controls.

• Always hold the plug when disconnecting the unit from the socket outlet. Do not pull on ex. The ex can become damaged and cause a short circuit.

• Use a soft, dry cloth to clean the unit.

• Set up unit so that no one will trip over the ex.

• If you intend to wall mount the unit, contact the shop where you purchased the unit for advice, and leave the installation work to professionals. Improper installation can cause damage and/or injuries.

• To protect the unit during a thunder storm, unplug the AC power cord and disconnect the aerial, cable and satellite decoder/systems etc.

Caution: Do not touch the aerial connector.

• The unit becomes warm when in operation. Do not place any covers or blankets on the unit in order to prevent overheating.

• The ventilation holes should not be blocked. Do not set up near radiators. Do not place in direct sunshine.

• Moisture condensation occurs in the following situations:

- When you move the unit from a cold place to a warm place.

- When you use the unit in a room where the heater was just turned on.

- When you use the unit in an area where cold air from an air conditioner directly hits the unit.

- When you use the unit in a humid place.

• Never use the unit when moisture condensation could occur.

• Using the unit when moisture condensation exists may damage its own internal parts. Allow two or three hours, the unit will warm up and moisture will be evaporated before switching on.

English - 6 -

Fitting or Removing the pedestal stand

(1) Carefully lay the front of the unit face down on a at, cushioned surface with the stand hanging over the edge.

(2) To t the stand use the screws supplied.

(3) Remove the screws xing the pedestal stand (4) After the screws are removed, hold the pedestal stand in place, then remove the pedestal stand and the

plastic moulding from the TV.

Note: Extreme care should always be used when removing the pedestal stand to avoid damage to the LCD panel.

For 48T543*DG model

When using a Wall Bracket

Please use a wall bracket appropriate for the size and weight of the LCD TV and two people are required for the installation.

(1) Unplug and remove any cables and/or other component connectors from the rear of the TV. (2) Carefully lay the front of the unit face down on a at, cushioned surface such as a quilt or blanket. (3) Follow the instructions provided with your wall bracket. Before proceeding, make sure the appropriate

bracket(s) are attached to the wall and the back of the TV as described in the instructions provided with the wall bracket.

English

English - 7 -

English

The Remote Control

Simple at-a-glance reference of the remote control. The supplied type is model dependant.

1. Standby

2. Numeric buttons

3. 3D Settings

4. Mute

5. Volume Up / Down

6. Menu on-off

7. Navigation buttons

(Up/Down/Left/Right)

8. Okay (Conrm) / Hold (in

TXT mode) / Channel List

9. Return / Index page (in

TXT mode)

10. Media Browser

11. Quick Menu

12. My button 1(*)

13. Coloured buttons

14. Mono/Stereo - Dual I-II /

Current Language

(in DVB channels)

15. Rapid reverse

16. Programme recording

17. Pause / Timeshift recording

18. Play

19. Subtitle on-off (in Media

Browser mode and in DVB channels)

20. Stop

21. Rapid advance

22. Image size

23. My button 2(*)

24. Teletext / Mix (in TXT

mode)

25. Electronic programme

guide(in DVB channels)

26. Exit

27. Internet portal

28. Info / Reveal (in TXT

mode)

29. Programme Down /

Page up - Programme Up / Page down

30. Previous programme

31. AV / Source selection

(*) MY BUTTON 1 & MY BUTTON 2

These buttons may have default functions depending on the model. However you can set a special function to these buttons by pressing on them for ve seconds when on a desired source or channel. A conrmation message will be displayed on the screen. Now the selected MY BUTTON is associated with the selected function.

Note that if you perform rst time installation, MY BUTTON 1&2 will return to their default function.

Inserting Batteries and Effective Range of the Remote Control

Remove the back cover to reveal the battery compartment and make sure the batteries are inserted the right way round. Suitable battery types for this

remote are AAA, IEC R03 1.5V.

Do not combine a used, old battery with a new one or mix battery types. Remove exhausted batteries immediately to prevent acid from leaking into the battery compartment. Dispose of them in a designated disposal area.

Warning: Batteries must not be exposed to excessive heat such as sunshine, re or the like.

The performance of the remote control will deteriorate beyond a distance of ve metres or outside an angle of 30 degrees from the IR receiver. If the operating range becomes reduced the batteries may need replacing.

English - 8 -

Connecting External Equipment

Side View

COMMON INTERFACE

The Common Interface is for a Conditional Access Module (CAM).

YPbPr Video Inputs

Headphone

SIDE AV

Side HDMI Input (*)

USB Input (*)

RGB/PC

Input

SCART Sockets

Digital Audio

Socket (optical)

LAN Input

HDMI Input Sockets (*)

Aerial Input

Audio Inputs Subwoofer

Out

HDMI 4

Before connecting any external equipment, remove the mains plug from the wall socket.

English

(*) Number of these inputs may change according to the model of your TV.

Aerial cable:................................................................

Connect the aerial to the ANT. socket on the rear of the TV.

SCART lead:..............................................................

If you use a decoder* or a media recorder, it is essential that the scart cable is connected to the TV.

Before running rst time installation, any connected devices need to be set to standby mode.

The DIGITAL AUDIO socket enables the connection of a suitable surround sound system.

HDMI

(High-Denition Multimedia Interface) is for using with a DVD decoder or other equipment with digital audio and video output. It is designed for best performance with 1080i and 1080p high-denition video signals but will also accept and display VGA, 480i, 480p, 576i, 576p and 720p signals. PC format signals will also be displayed.

Note: Although this TV is able to connect to HDMI equipment, it is possible that some equipment may not operate correctly.

When connecting a device via the Side AV input, you must use the supplied connection cable to enable connection.

When connecting a device via YPbPr input, you must use a proper connection cable(not supplied) to enable connection.

English - 9 -

LAN Input is used to connect the TV to your home network.

You can use Subwoofer Out for connecting an external, active subwoofer to the set to give a much deeper bass effect.

A wide variety of external equipment can be connected to the TV; therefore, the relevant owner’s manuals for all additional equipment must be referred to for exact instructions.

If the TV automatically switches over to monitor external equipment, return to normal TV by pressing the desired programme position button. To recall external equipment, press “SOURCE - ” button repeatedly to switch between sources.

Regardless of source’s property, audio output from the DIGITAL AUDIO socket cannot be copied.

Connecting an HDMI® or DVI Device to the HDMI Input

HDMI Input Socket (Back)

Colours

English

The HDMI inputs on your TV receive digital audio and uncompressed digital video from an HDMI source device or uncompressed digital video from a DVI (Digital Visual Interface) source device.

These inputs are designed to accept HDCP (High-Bandwidth Digital-Content Protection) programme material in digital form from EIA/CEA-861-D–compliant [1] consumer electronic devices (such as a set-top box or DVD player with HDMI or DVI output).

NOTE:

• Some early HDMI equipment may not work properly with your latest HDMI TV.

• Supported Audio format: Linear PCM, sampling rate 32/44.1/48kHz.

To Connect an HDMI Device

Connect an HDMI cable (type A connector) to the HDMI terminal. For proper operation, it is recommended that you use an HDMI cable with the HDMI Logo ( ).

• If your HDMI connection is capable of 1080p and/or your TV is capable of refresh rates greater than 50Hz, you will need a Category 2 cable. Conventional HDMI/DVI cable may not work properly with this mode.

• HDMI cable transfers both video and audio. Separate analogue audio cables are not required (see illustration).

• To view the HDMI device video, press “SOURCE - ” button to select the appropriate HDMI input.

CEC

CEC operation is available if a CEC device is present. This feature is limited to Toshiba disc players that support CEC.

The CEC osd menu is accessed through the “QUICK” button on the remote the osd CEC menu will only be displayed if a

CEC product is connected.

To Connect a DVI Device

Connect an HDMI-to-DVI cable (HDMI type A connector) to the HDMI input socket and audio cables to the RED and WHITE SIDE AV AUDIO inputs on the Audio/Video connection cable supplied (see illustration).

• The maximum recommended HDMI-to-DVI cable length is 6.6 ft (2m).

• An HDMI-to-DVI cable transfers video only. Separate analogue audio cables are required.

SIDE AV Input

Side Audio/Video

Connection Cable

Match

(supplied)

HDMI Input

Audio Transfer

Audio Cable

(not supplied)

Sockets

* Number of these

inputs may change according to the model of your TV.

Video Transfer

HDMI to DVI Cable (not supplied)

* Number of

these inputs may change according to the model of your TV.

HDMI device

NOTE:

To ensure that the HDMI or DVI device is reset properly, it is recommended that you follow these procedures:

• When turning on your electronic components, turn on the TV rst, and then the HDMI or DVI device.

• When turning off your electronic components, turn off the HDMI or DVI device rst, and then the TV.

English - 10 -

Connecting a Computer

Video Connection

Colours

Connecting a DVD Player

English

To Connect a Computer

With either an RGB/PC or an HDMI connection, you can watch your computer’s display on the TV and hear the sound from the TV’s speakers.

When connecting a PC to the RGB/PC input on TV, use an analogue RGB (15-pin) computer cable and use the SIDE AV socket with a PC audio cable (not supplied) for audio connection, using the supplied Side AV connection cable’s RED and WHITE inputs (see illustration).

To use a PC, set the monitor output resolution on the PC before connecting it to the TV. To display the optimum picture, use the PC setting feature.

NOTE:

• Some PC models cannot be connected to this TV. An adaptor is not needed for computers with a compatible mini D-sub15-pin terminal.

• Depending on the DVD’s title and the specications of the PC on which you are playing the DVD-Video, some scenes may be skipped or you may not be able to pause during

multiangle scenes.

Connecting to a DVD Player via YPbPr

Some DVD players are connected through COMPONENT SOCKETS (YPbPr). In this case, you must use the Component YPbPr video connection cable (not supplied) for enabling connection. First, plug the cable to the TV’s YPbPr sockets (back). Afterwards, insert your YPbPr cable’s (not supplied) connectors into the DVD players YPbPr sockets (see illustration below). Colours of the connected jacks should match.

To enable audio connection, use an audio cable cable (not supplied). First, plug the audio cable’s connectors into the audio inputs of the TV (back). Afterwards, insert the audio cable’s single jack into the DVD players audio socket (see illustration below). Colours of the connected jacks should match.

YPbPr V eo id Cable

(N t supp ed) o li

To RED & WHITE inputs

Audio Cable

(Not supplied)

DVD Player

Audio Connection

Match

Colours

Connecting a USB Memory

To Connect a USB Flash Drive

• You can connect a USB Flash Drive to your TV by using the USB input/inputs on the TV. This feature allows you to display/play music, photo or video les stored in a USB stick.

• It is possible that certain types of USB devices (e.g. MP3 Players) may not be compatible with this TV.

• You may back up your les before making any connections to the TV set in order to avoid any possible data loss. Note that manufacturer will not be responsible for any le damage or data loss.

• Do not pull out USB module while playing a le.

CAUTION: Quickly plugging and unplugging USB devices may cause damage to the USB device.

English - 11 -

English

Connecting a home network

Connectivity feature allows the TV to connect to the home network wired or wirelessly. You can use this networking system to connect to the Toshiba Portal or to access photo, video and audio les that are stored on a media server connected to the network and play/ display them on the TV.

Wired connection

Connect the TV to the modem/router via a LAN cable (not supplied). Select Network Type as Wired

Device in Network Settings menu and then highlight Network. Press Left or Right buttons and set as Enabled to connect.

LAN input on the TV

LAN Cable

modem/router

access point

LAN Cable

Wireless connection

To connect the TV to the home network wirelessly just select Network Type as Wireless Device in Network Settings menu and then highlight Network. Press Left or Right buttons and set as Enabled to connect. The TV will search for available networks. Select the desired network and press OK. The TV has a built-in WLAN system and has no need for additional devices to connect to a wireless network.

TV (Built-In WLAN system)

wireless modem/router

access point

LAN Cable

Broadband

ISP connection

Broadband

ISP connection

Performance depends on many factors, conditions

and variables, including distance from acces point(AP), volume of network trafc, building materials and construction, operating system used, mix of wireless products used, interference and other adverse conditions.

Please refer to Network Settings section to congure a wired or a wireless connection, if more detailed information is needed.

English - 12 -

Power Save Mode

Environmental Information

This television is designed to be environment friendly. You not only help to save the environment but also you can save money by reducing electricity bills thanks to the energy efciency feauture of this TV. To reduce energy consumption, you should take the following steps:

You can use Power Save Mode setting, located in the Picture Settings menu. If you set Power Save Mode as Eco, the TV will switch to energy-saving mode and luminance level of TV set will be decreased to optimum level. Note that some picture settings will be unavailable to be changed when the TV is in Power Save Mode.

If pressed Right button, “Screen will be off in 15 seconds.” message will be displayed on the screen. Select Proceed and press OK to turn the screen off immediately. If you don’t press any button, the screen will be off in 15 seconds. Press any button on the remote or on the TV to turn the screen on again. If you disable Power Save Mode, picture mode will be automatically set to Dynamic.

It is highly recommended to activate Power Save Mode to reduce your annual power consumption. And also it is recommended to disconnect the TV from the mains plug to save more energy when you are not going to use it for a long period of time.

Repair Information

Please refer all servicing to qualied personnel. Only qualied personnel must repair the TV. Please contact your local dealer, where you have purchased this TV for further information.

English

English - 13 -

Controlling the TV

A wide variety of external equipment can be connected via the sockets located on the side and back of the

English

TV. Whilst all the necessary adjustments and controls for the TV are made using the remote control, the

buttons on the Back of the TV may be used for some functions.

Switching on

If the standby LED is unlit, check that the mains plug is connected to the power and press the button on the back side of the television or button on the remote control to switch the television on.

To put the television into Standby, press button on the remote control or button on the TV. To view the television, press again. The picture may take a few seconds to appear.

Note: The active Standby LED colour will turn to red in a few moments when the TV is switched into Standby.

For energy saving:

Turning the TV off at its mains supply, or un-plugging it, will cut energy use to nearly zero for all TV’s. This is recommended when the TV is not being used for a long time, e.g. when on holiday.

Reducing the brightness of the screen will reduce energy use.

Note: Putting the TV into standby mode, will reduce energy consumption, but will still draw some power.

Using the Remote Control

Press the MENU button on the remote control to see the menus.

The main menu appears as a group of icons each for a menu option. Press the Left or Right button to select a topic.

In sub menu screen mode the menu appears as a list. Press the Up or Down button to select a topic.

To use the options press the Up and Down buttons on the remote control to move up and down through them and OK, Left or Right buttons to select the required choice. Follow the on screen instructions. The functions of each menu are described in detail throughout the manual.

Using the Controls on the TV

Using the control buttons on the Back of the TV:

• To alter the volume press or .

• To alter the programme position press buttons

on the Back of the TV.

• Press buttons at the same to view main menu

and use buttons to navigate and to change value.

To select an external input, press button until the appropriate input source is selected.

Please always refer to the owner’s manual of the equipment to be connected for full details.

English - 14 -

Initial Installation

Before switching on the TV, put your decoder and media recorder to Standby if they are connected and

ensure the aerial/cable is connected to your TV. To set up the TV, use the buttons on the remote control as

detailed on The Remote Control page.

English

IMPORTANT: Ensure that the aerial/cab le is connected and a Common Interface module is not inserted before

switching on the TV for the rst time installation.

1. Connect the mains plug and switch the TV on

using the button. If the TV does not switch on, press any numbered or button on the remote control, then the language selection menu will be displayed. This screen will appear the rst time that the TV is switched on and each time the TV is reset.

2. By pressing Up or Down button, highlight the language you want to set and press OK button. The following screen will be displayed next:

Note: Depending on the Country selection you may be asked

to set and conrm a PIN at this point. The selected PIN cannot

be 0000. You have to enter it if you are asked to enter a PIN for any menu operation later.

5. The following message will be displayed next on

the screen:

Select Store mode if the TV will be placed in a

store to exhibit. This option will congure your TV’s settings for best display quality and the supported features of the TV will be displayed on the top of the screen as a info banner. If Store mode is selected, a conrmation screen will be displayed. Select YES to proceed. For home use select Home Mode.

This option will be available in Other Settings

menu and can be turned off/on later.

6. Press OK button on the remote control to continue

and a message will be displayed asking wheter you want to do network settings. Select Yes and the Network Settings menu will be displayed. Please refer to Connecting a Home Network and Network Settings sections to congure a wired or a wireless connection. After the settings are completed press OK button to continue.

7. Afterwards, the following OSD will be displayed

on the screen:

3. By pressing Left or Right button, select the country you want to set and press Down button to highlight the Search Type option. Use Left or Right to set the desired search type. Available search types are Digital only, Analogue TV only and Full.

4. When set, press Down button to highlight

Teletext Language. Use Left or Right button to select desired language region. Highlight Scan Encryted Channels and enable/disable this option by using Left or Right buttons. Press OK to continue.

English - 15 -

8. If you select Cable option, a conrmation screen

will be displayed. If you want to search for available networks, select YES to proceed. The following screen will be displayed:

English

Initial Installation - continued

You can select Network, Frequency, Network

ID and Search Step from this screen. For

highlighting lines you see, use Up or Down button. You can set Search Step as 8000 kHz or 1000 kHz. If you select 1000 kHz, the TV will perform search process in a detailed way. Searching duration will thus increase accordingly. When finished, press OK button to start automatic search.

If you select NO, the following screen will be

displayed:

You can set Start - Stop Frequencies and Search

Step as desired. When nished, press OK button to start the search.

9. If you select Aerial option from the Search Type

screen, the television will search for broadcasts.

10. The Auto tuning screen will appear and the

television will start to search for available stations. The progress bar will move along the line. You must allow the television to complete the search.

Note: You can press MENU button to cancel.

While the search continues a message will appear, asking whether you want to sort channels according to the LCN(*). Select Yes and press OK to conrm.

(*) LCN is the Logical Channel Number system that organizes available broadcasts in accordance with a recognizable

channel sequence (if available).

After the available stations are stored, Edit Channel List will be displayed on the screen.

Press OK button to quit channel list and watch TV.

Note: Do not turn off the TV while initializing first time

installation.

English - 16 -

Auto Tuning

English

Auto Tuning

As new services are broadcast, it will be necessary to retune the television in order to view them.

• It is recommended to run Auto Tuning periodically

to ensure that all new services are added. Please be aware that Auto Tuning will completely retune the television and all current channels and settings will be lost.

• Press MENU button on the remote control and select

Install and Retune by using Left or Right button. Press OK button and the following menu screen will be displayed.

• Select Automatic Channel Scan (Retune) by using

Up or Down button and press OK button. Automatic Channel Scan options will be displayed. You can select options by using Up or Down and OK buttons.

Auto Channel Scan Menu Operation

Digital Aerial: Searches and stores aerial DVB stations.

Digital Cable: Searches and stores cable DVB stations.

Analogue: Searches and stores analogue stations.

Digital Aerial & Analogue: Searches and stores

aerial DVB and analogue stations.

Digital Cable & Analogue: Searches and stores cable DVB and analogue stations.

• Whenever you select an automatic search type and

press OK button, a conrmation screen will appear on the screen. To start installation process, select Yes, to cancel select No by using Left or Right and OK button.

• After auto channel scan type is set and selected

and conrmed, installation process will start and progress bar will move along. The television will search for all available stations. You must allow the television to complete the search. Press MENU button to cancel the process. In such a case, located channels are not stored.

English - 17 -

Note: Menu list of available features may change depending on the model.

English

Manual Tuning, Analogue Fine Tuning

The television can be tuned-in manually using Manual Search feature.

Digital Aerial Manual Search

The feature is available for service engineers or can be used for direct channel entry if the multiplex channel is known.

• Select Manual channel scan from the Install and Retune menu and press OK.

After selecting search type as Digital Aerial, you can enter the multiplex or frequency number using the numeric buttons and press OK button to search.

• Enter the multiplex number using the numeric buttons. The television will automatically search for that multiplex. When the multiplex is found any channels not currently on the programme list will be added and the programme information at the top of the screen will be updated.

• Repeat as necessary.

Digital Cable Manual Search

• In cable manual scan, you can enter frequency, modulation, symbol rate and network channel scan options. After selecting search type as Digital Cable, you can set the desired options and press OK button to search.

Analogue Manual Search

The television can be tuned-in manually. For example: if the television cannot be connected to a media recorder/decoder with a SCART lead or to tune-in a station on another System.

To allocate a programme position on the television for a decoder and media recorder: turn the decoder on, insert a pre-recorded lm into the media recorder and press PLAY, then manually tune.

After selecting search type as Analogue, you can use Up or Down button to highlight an item and then press Left or Right button to set an option.

Enter the channel number or frequency using the numeric buttons. You can then press OK button to search. When the channel is located, any new channels that are not on the list will be stored.

Analogue Fine Tune

• Select Analogue Fine Tune from the Install and Retune menu by using Up or Down and OK

buttons. Analogue ne tune screen will be displayed. Analogue Fine Tune feature will not be available if

there are no analogue channels stored.

• Use Left or Right button to set Fine Tune. When nished, press OK button.

Clear Service List (*)

(*) This setting is visible only when the Country option is set

to Denmark, Sweden, Norway or Finland.

• Select Clear Service List from the Install and Retune menu by using Up or Down and OK buttons.

A conrmation message will be displayed. If you want to delete all channels, select Ye s and press

OK. Use this setting to clear channels stored.

English - 18 -

General Operation

English

Stereo and Bilingual Transmissions

If stereo or dual language broadcasts are transmitted, the word Stereo or Dual will appear on the screen each time positions are changed, disappearing after a few seconds. If the broadcast is not in stereo, the word Mono will appear.

Stereo… Press “LANG - ” to select Stereo or Mono.

Bilingual… Bilingual transmissions are rare. If they are

transmitted, the word Dual will be displayed. Choose the required programme number, and if the word Dual appears, press “LANG - ” to select Dual I, Dual II or Mono.

For DTV broadcasts

To view current language and for changing to an alternative language (if available), press “LANG -

” button. Available options will be listed.

Displaying Subtitles

In digital broadcasts, this feature will show subtitles on the screen in the selected language provided they are being broadcast.

Press SUBTITLE button to turn the subtitles on. Press

SUBTITLE button again to turn the subtitles off.

Viewing Main Menu

Press or buttons on the TV at the same time to view main menu.

Press MENU button on the remote control to view main menu.

Controlling Volume and Muting Sound

Volume

Press + or - button on the remote control to adjust the volume.

Sound Mute

Press “ ” button once to turn the sound off and again to cancel.

Selecting Programme Positions

To select a programme position use the numeric buttons on the remote control. Programme positions can also be selected using P or P buttons. Press “INFO - ” button to display the on-screen information i.e. programme position, stereo/mono signal and picture format.

Standby Notications

If the TV switches off while in No Signal mode, the following on-screen message will be displayed on the next switch-on:

When the Auto TV OFF timeout is reached, the following message will be displayed on the screen. Select Yes to shut down the TV. Select No to cancel. The TV will switch off as well, if you do not make a selection on this screen.

If the TV switches off owing to the auto power down feature, the following on-screen message will be displayed on the next switch-on:

English - 19 -

Channel List, Sorting Programmes, Programme Locking

English

You can view stored channels and sort them by using the Channel List feature.

Viewing Channel List

The channel order may be changed to suit your personal preference.

• Select Channel List from the main menu and press OK button. The following menu will be displayed:

• Select Edit Channel List to manage all stored channels. Use Up or Down and OK buttons to select Edit Channel List.

• Press Up or Down button for selecting a channel. You can press P or P button to move page up or page down.

• To watch a specic channel, highlight it by using Up or Down button. Afterwards press OK button.

• Press BLUE button to view ltering options.

• Press MENU or EXIT button to exit.

Note: The channels listed are mixed at the channel list. Channel types can be differentiated by the icons next to them: DTV (digital tv), HD (HD TV) , ATV (Analogue TV) ,TV (TV), Radio symbol (Radio), encrypted, lock, and FAV symbols (for channels in the favourite list). Listed channels can also be

sorted by using the active channel list lter.

Moving a Channel

• Highlight the desired channel by using Up or Down button.

• Select Move option in the channel list by using Left or Right button and press OK button.

• Edit Number screen will be displayed. Enter the desired channel number by using the numeric buttons on the remote control and press OK. If there is a previously stored channel on that number, a warning screen will be displayed. Select Yes if you want to move the channel and press OK.

• Selected channel is now moved.

English - 20 -

Deleting a Channel

You can press GREEN button to tag/untag all channels; YELLOW button to tag/untag channel.

• Select the channel that you want to delete and select

Delete option by using Left or Right button. Press OK button to continue.

• A warning screen will appear. Select Yes to delete, select No to cancel. Press OK button to continue.

Renaming a Channel

• Select the channel that you want to rename and select Edit Name option by using Left or Right

button. Press OK button to continue.

• Pressing Left or Right button moves to the previous/ next character. Pressing Up or Down button changes the current character. Pressing the numeric buttons ‘0...9’ replaces the highlighted character with the characters printed above the button one by one as the button is pressed.

• When nished, press OK button to save. Press

MENU or BACK to cancel.

Locking a Channel

You can press GREEN button to tag/untag all channels; YELLOW button to tag/untag a single channel.

• Select the channel that you want to lock by using Up or Down button.

• Select Lock option by using Left or Right button. Press OK button to continue.

• You will be asked to enter parental control PIN. Enter the PIN number.

Note: Default PIN can be set to 0000 or 1234. If you have dened the PIN(is requested depending on the country

selection) during the First Time Installation or changed the

default PIN later from the Set PIN option under the Parental Settings menu, use the PIN that you have dened.

• Press OK button when the desired channel is highlighted to lock/unlock the channel. Lock symbol will be displayed next to the selected channel.

Viewing Info Banner, Electronic Programme Guide

English

Viewing Info Banner

• Press“INFO - ” button. The information screen will

appear giving details of the channel and programme currently being viewed.

• Whenever you change channel, the TV displays the broadcast picture along with an information banner at the bottom of the screen. This will remain on the screen for a few seconds.

• If the selected channel is locked, you must enter the correct four numeric code to view the channel. “Enter PIN” will be displayed on the screen in such a case:

• Enter the 4-digit PIN number to continue.

Note: Default PIN can be set to 0000 or 1234. If you have dened the PIN(is requested depending on the country

selection) during the First Time Installation or changed the

default PIN later from the Set PIN option under the Parental Settings menu, use the PIN that you have dened.

Electronic Programme Guide

• Select the on-screen guide by pressing GUIDE button, the guide screen will appear highlighting details of the channel and programme currently being viewed. This may take a few moments to appear.

• For details of other programmes currently available, press navigation buttons to scroll up and down or scroll left/right through the list. As channels are selected, details of the programme currently being broadcast will appear.

• Press RED button to view the previous day.

English - 21 -

• Press GREEN button to view the next day.

• Press YELLOW button for zooming to a programme.

• Press BLUE button to display ltering options.

• Press SUBTITLE button to sort channels by a genre.

• For information on a highlighted programme, press

“INFO - ” button.

• Use numeric buttons for quickly selecting a

broadcast.

• Use the navigation buttons to highlight a programme

and press OK button to display Event Options menu. The following options are available.

Select Channel: Using this option, you can switch

to the selected channel.

Record / Delete Record Timer: Select Record

option and press the OK button. If the programme is going to be broadcasted at a future time, it will be added to Timers list to be recorded. If the selected programme is being broadcasted at the moment, recording will start immediately.

To cancel an already set recording, highlight that

programme and press the OK button and select the option Delete Rec. Timer. The recording will be cancelled.

Note: You cannot switch to any other channel or source

while there is an active recording on the current channel.

Set Timer on Event / Delete Timer: You can set

a timer for future programmes using this option. To cancel an already set reminder, highlight that programme and press the OK button. Then select Delete Timer option. The timer will be cancelled.

Note: It is not possible to record or set timer for two or more

individual events at the same time interval.

• Press TEXT button to display searching options.

• Press “SWAP- ” button for displaying current

programmes.

• Press REC button to start recording the selected

programme. If the programme is going to be broadcasted at a future time, it will be marked with a red frame and added to Timers list to be recorded. If you select and press REC button again, the programme will be removed from the list.

Language Selection

English

Language Settings

Using this menu you can adjust the preferred language settings. Some features may not be available.

• Press MENU button and select Settings by using Left or Right button.

• Select Language and press OK to view this menu. Select the desired language by using Left or Right button. Press the MENU button on the remote control to exit.

Preferred

These settings will be used if available. Otherwise the current settings will be used.

Audio: By pressing Left or Right button change the audio language.

Subtitle: Alter the subtitle language with Left or Right button. The chosen language will be seen in subtitles.

Teletext: Changes the preferred teletext language.

Guide: By pressing Left or Right button change the

guide language.

Current

Audio: If audio language is supported, change the audio language by pressing Left or Right button.

Subtitle: If subtitle is backed up, alter the subtitle

language with Left or Right button. The chosen language will be seen in subtitles.

English - 22 -

Digital Settings - Parental Control, Menu Lock, Set PIN

You can view or set parental preferences of your TV.

English

Viewing Parental Control Menu

Press MENU button and select the Settings by using Left or Right button. Press OK button to view Settings

menu. Use Up or Down button to highlight Parental and press OK to continue:

• A dialogue box asking for the lock key will be

displayed.

• If it is incorrect, “Wrong PIN” OSD will be displayed.

If it is correct, the Parental Control menu will be displayed:

Note: Default PIN can be set to 0000 or 1234. If you have dened the PIN(is requested depending on the country selection) during the First Time Installation use the PIN

that you have dened.

Menu Lock

In Menu lock you can set locking for All menus, or the Installation menu to restrict access to these menus.

If the menu lock is disabled, there will be free access to the menu system.

• Use Up or Down buttons to go to Menu Lock

option. Use Left or Right buttons to choose Menu Lock Mode.

OFF: All menus are unlocked.

ALL MENUS: All Menus are accessible only with

the correct lock key. So the user cannot add, delete, rename, channels or set timers.

INSTALLATION MENU: Installation menu is locked. So the user can’t add channels.

Maturity Lock

When set, this option gets the maturity information from the broadcast and if this maturity level is disabled, disables access to the broadcast.

English - 23 -

Note: Maturity Lock is not available in all countries.

Child Lock

Child Lock disables the buttons on the television. All buttons on the remote control can still be used.

Set PIN

• Use Up or Down buttons to select Set PIN option. Press OK to display the Set PIN window.

• Use numeric buttons to enter new pin number. You will need to input your new pin a second time for verication purposes.

• After typing correct PIN numbers, PIN number will be changed.

Note: If you change the pin number make sure you write it down and keep it safe.

English

Conguring Picture Settings

You can congure picture settings of your TV by using Picture Settings menu.

Conguring Picture Settings

You can use different picture settings in detail. You

can customize current picture mode settings as

desired. For example, you can change items such as, Brightness, Contrast, Colour and Sharpness.

Press MENU button and select Picture by using Left or Right button. Press OK button to view Picture

Settings menu.

Operating Picture Settings Menu Items

• Press Up or Down button to highlight a menu item.

• Use Left or Right button to set an item.

• Press MENU button to exit.

3D Settings

The 3D feature of your TV enables you to view 3D content.

Refer to the Using 3D Feature section in this manual for detailed explanations on how to use the 3D Settings menu items.

Mode

This TV offers the choice of personalising the picture style. Natural, Cinema, Game, Sports and Dynamic are preset options and affect settings within the TV. Press Left or Right button to select the picture mode you prefer.

Note: Some options may be inactive depending on the selected mode.

Contrast

Sets the lightness and darkness values of the screen. Press Left or Right button to adjust the contrast.

Brightness

Sets the brightness value for the screen. Press Left or Right button to adjust the brightness.

Sharpness

Sets the sharpness value for the objects displayed on the screen. Press Left or Right button to adjust the sharpness.

Colour

Sets the colour value, adjusting the colours. Press

Left or Right button to adjust the colour.

Power Save Mode

Enables or disables the power save mode. Press Left or Right button to set as Disabled, Eco or to turn the screen off. See the section Environmental

Information in this manual for further information on Power Save Mode.

Note: Picture mode will be set to Dynamic automatically if the Power Save Mode is set to Disabled.

Backlight

This setting controls the backlight level and it can be set to Auto, Low, Medium and High.

Note: The backlight function will be inactive if Power Save Mode is set to Eco or picture mode is set to Game.

Noise Reduction

Sometimes some words or picture elements may become distorted or pixelated. Using the Noise Reduction feature reduces this effect by smoothing out the edges. Press Left or Right button to set noise reduction level.

Advanced Settings

Some additional controls in the picture menu are grouped under the title Advanced Settings. To view or change, rst highlight Advance Settings and press OK button to view. Advanced Settings menu controls are as the following:

Dynamic Contrast: You can change contrast rate by using dynamic contrast function. Dynamic contrast can be set to one of these options: Low, Medium,

High or Off.

Colour Temp: Colour Temperature increases the

‘warmth’ or ‘coolness’ of the picture by increasing the red or blue tint. Colour temperature can be set to one of these options: Normal, Warm or Cool.

English - 24 -

Conguring Picture Settings - continued

Picture Zoom: Sets the picture size to Auto, Full, 16:9, Subtitle, 14:9, 14:9 Zoom, 4:3 or Cinema. Press Left or Right button to change the setting.

Movie Sense: Press left/right buttons to set as Low, Medium, High or Off. While Movie Sense is active,

it will optimize the TV’s video settings for motional images to acquire a better quality and readability.

When Movie Sense option is set to Low, Medium or High, demo option will be available. If one of these

options is selected and if you press OK button, then the demo mode starts. While demo mode is active, the screen will be divided into two sections, one displaying the movie sense activity, the other displaying the normal settings for TV screen.

Film Mode (optional): Films are recorded at a different number of frames per second to normal television programmes. Press Left or Right button to set this feature to Auto or Off. Turn this feature to Auto when you are watching lms to see the fast motion scenes clearly.

Skin Tone: Adjust the desired skin tone.

Colour Shift: Adjust the desired colour tone.

RGB Gain: Press OK button to edit RGB gain. You

can congure the colour temperature values using the RGB Gain feature.

HDMI True Black (optional): While watching from HDMI source, this feature will be visible in the Advanced Settings menu.

You can use this feature to enhance blackness in the picture. Set this feature to On to activate.

Note: HDMI True Black On/Off feature functions only when the HDMI device output is set to RGB.

Reset

This feature allows you to reset the current picture settings to the default values. Press MENU button and select Picture by using Left or Right button. Press Up or Down button to select Reset and press OK button.

Note: The reset function does not reset the settings for Mode, Noise Reduction, Colour Temp, Picture Zoom and HDMI

True Black.

English

English - 25 -

Changing Picture Format

Press “SCREEN - ” button repeatedly to select between Auto(*), Full(**), 16:9, Subtitle, 14:9, 14:9 Zoom,

English

4:3 or Cinema.

Using the special functions to change the size of the displayed image (i.e. changing the height/width ratio) for the purposes of public display or commercial gain may infringe on copyright laws.

You can shift to screen up or down by pressing “ ”/“ ” buttons while picture zoom is selected as 14:9 Zoom, Cinema or Subtitle.

(*) When Auto is selected, the aspect ratio of the screen is adjusted by the information provided by the selected source (if available). The format being displayed in Auto mode is completely independent of WSS information which could be included in the broadcast signal or the signal from an external device.

Note: Auto mode will only be available in SCART, HDMI, YPbPr and DTV.

(**) Full mode is only available on HD channels.

Use this setting when watching a

widescreen DVD, widescreen video

16:9

Subtitle

14:9

tape or a 16:9 broadcast (when

available). Due to the range of widescreen formats (16:9, 14:9 etc.) black bars may be visible on the top

and bottom of the screen.

When subtitles are included on a

letterbox format broadcast, this

setting will raise the picture to ensure

that all the text is displayed.

This zooms up the wide picture (14:9 aspect ratio) to the upper and lower limits of the screen

14:9 Zoom

4:3

Cinema

This option zooms to the 14:9 picture.

Use this setting to view a true 4:3

This zooms up the wide picture

(16:9 aspect ratio) to the full

broadcast

screen.

English - 26 -

Conguring PC Picture Settings

English

PC Picture Settings (*)

(*) While in VGA/PC mode, some items in Picture menu will be unavailable. Instead, VGA mode settings will be added to the Picture Settings while in VGA/ PC mode.

PC Picture controls

Contrast, Brightness and Colour adjustments in

this menu are identical to adjustments dened in TV picture menu.

Select Reset and press OK button to reset the adjustments.

Note:

For switching to VGA/PC source, press “SOURCE -

” button on your remote control and select VGA/

PC input.

Note that VGA/PC mode menu settings are available

only while the TV is in PC source.

PC Position

Select this to display PC position menu items.

Press Left or Right button to adjust the value.

Dot Clock

Dot Clock adjustment corrects the interference that appear as vertical banding in dot intensive presentations like spreadsheets or paragraphs or text in smaller fonts.

Press Down button until Dot Clock is highlighted.

Press Left or Right button to adjust the value.

Phase

Depending on the resolution and scan frequency that

you input to the TV Set, you may see a hazy or noisy

picture on the screen. In such a case you can use this item to get a clear picture by trial and error method.

Press Down button until Phase is highlighted.

Press Left or Right button to adjust the value.

Autoposition

If you shift the picture horizontally or vertically to an

unwanted position, use this item to put the picture into correct place automatically.

Highlight Autoposition and then press the OK button.

H Position

H (Horizontal) Position shifts the image horizontally to

right hand side or left hand side of the screen.

Press Down button until H Position is highlighted.

Press Left or Right button to adjust the value.

V Position

V (Vertical) Position shifts the image vertically towards the top or bottom of the screen.

Press Down button until V Position is highlighted.

English - 27 -

English

Conguring Sound Settings

You can congure sound settings of your TV by using Sound Settings menu.

Conguring Sound Settings

Sound settings can be congured according to your

personal preferences.

Press MENU button and select Sound by using Left or Right button. Press OK button to view Sound Settings menu.

Operating Sound Settings Menu Items

• Press Up or Down button to highlight a menu item.

• Use Left or Right button to set an item.

• Press MENU button to exit.

Volume

Select Volume using Up or Down button and then use Left or Right button to set volume level.

Equalizer (Only for speaker)

You can customize current sound mode settings. Select

the appropriate mode in accordance with the installation

location of the TV and adjust the equalizer on-screen as desired. Press OK button to view equalizer submenu.

In equalizer menu, the preset can be changed to Music, Movie, Speech, Flat, Classic and User. Press the MENU button to return to the previous menu.

Note: Equalizer menu settings can be changed manually only when the Equalizer Mode is in User.

English - 28 -

Balance (Only for speaker)

This setting is used for emphasizing left or right speaker

balance.

• Press Left or Right button to change the level of the balance. Balance level can be adjusted between -31 and +31.

Headphone

This setting is used to set the sound output when headphones are connected.

• Press Up or Down button to select Headphone.

• Press Right button to increase headphone volume level. Press Left button to decrease headphone volume level. Headphone volume level can be adjusted between 0 and 63.

Sound Mode

This setting is used to set the Sound Mode. Higlight Sound Mode by using Up or Down button. Press Left

or Right button to set. You can select Mono, Stereo, Dual I or Dual II mode, only if the selected channel supports that mode.

AVL

Sometimes there can be large changes in volume when switching from a DTV 5.1ch to a DTV 2ch, an ATV channel, or an external input. Using the AVL feature reduces these volume differences.

• Press Up or Down to highlight AVL. Press Left or Right button to set AVL as On or Off.

Headphone/Lineout

Set this option as Lineout, when an external amplier is connected to the TV using the headphone jack. If headphones are connected to the TV, set this option as Headphone.

Dynamic Bass

Dynamic Bass is used to increase bass effect of the

TV set. Select Dynamic Bass using Up or Down buttons and press Left or Right button to set.

Surround Sound

In the Sound menu, press Up or Down to highlight Surround Sound. Press Left or Right button to set Surround Sound as On or Off.

Digital Out

This setting enables you to set Digital Out preference as Compressed or PCM. You should set this feature in accordance with the received broadcast’s content. Select Digital Out using Up or Down button and then use Left or Right button to set.

Settings Menu Operation, Conditional Access

English

Conguring Your TV’s Settings

Detailed settings can be configured to suit your personal preferences.

Viewing Settings Menu

Press MENU button and select Settings by using Left or Right button. Press OK button to view Settings

menu.

Press Up or Down button to highlight a menu item. Press OK button to select an item. Press MENU button to exit.

Conditional Access: This setting controls conditional access modules when available. Use Up or Down button to highlight Conditional Access. Press OK button to continue.

Language: Congures language settings.

Parental: Congures parental settings.

Timers: Sets timers for selected programmes.

Recording Conguration: Displays the recording

conguration menu.

Date/Time: You can congure date/time preferences by using this menu screen.

Sources: Enables or disables selected source options.

Network Settings: Congures network settings.

Other Settings: Displays other setting options of

the TV set.

Using a Conditional Access Module

The Common Interface Slot, situated on the side of the television, enables the insertion of a CAM (Conditional Access Module) and card. These are purchased from a service provider and allow additional subscription broadcasts to be viewed. For more information, see a service provider.

IMPORTANT: Insert or remove the CAM only when

the TV is SWITCHED OFF.

• In order to watch certain digital channels, a conditional

access module (CAM) is necessary. This module must be inserted in the CI slot of your TV.

• Obtain the Conditional Access Module (CAM) and

the viewing card by subscribing to a pay channel company, then insert those to the TV using the following procedure.

• Insert the CAM and then the viewing card to the slot that

is located in the terminal cover at the rear side of the TV.

• The CAM should be correctly inserted, it is impossible

to insert fully if reversed. The CAM or the TV terminal

may be damaged if the CAM is forcefully inserted. Connect the TV to the mains supply, switch on and then wait for few moments until the card is activated.

• When no module is inserted, “No common interface

module detected.” message appears on the screen.

• Refer to the module instruction manual for details of

the settings.

Viewing Conditional Access Menu (*)

(*) These menu settings may change depending on the service provider.

Press MENU button and select Settings by using Left or Right button. Press OK button to view Settings menu. Use Up or Down button to highlight Conditional Access and press OK to view menu

items.

English - 29 -

English

Setting Timers

Timers

To view Timers menu, press MENU button and select Settings by using Left or Right button. Press OK button to view Settings menu. Use Up or Down button to highlight Timers and press OK to continue:

Setting Sleep Timer

The television can be set to turn itself off after a certain length of time.

• Highlight Sleep Timer by using Up or Down button.

• Use Left or Right button to set. The timer can be set to Off or between 30 minutes and 2 hours (120 minutes) in steps of 30 minutes.

Setting Programme Timers

This feature will set the television to go to a specic

channel at a certain time. It can be used to view a particular programme or can be used to view a series of programmes by setting the Repeat option to Daily, Weekly or Weekdays.

Press Down button to highlight a timer on an event. Programme timer function buttons will be displayed on the screen.

Note: This feature will be available only when a timer has been programmed.

Adding a Timer

Press YELLOW button on the remote control to add a timer. The Add timer menu appears on the screen:

Network Type: Set the network type to lter the channels that will be listed in the Channel option.

Timer Type: You can select timer type as Record or Timer.

Channel: Changes channel by using Left or Right.

Record Type: This feature is unavailable to be set.

Date: Enter a date using the numeric buttons.

Start: Enter a starting time using the numeric buttons.

End: Enter an ending time using the numeric buttons.

Duration: Displays duration between the starting

and ending time.

Repeat: Sets a timer to be repeated as Once, Daily, Weekly or Weekdays.

Change/Delete: There are two options available, Allowed and Disallowed. If this option is set as Disallowed, a PIN(*) is required to change or delete

the programmed timer.

Playback: Controls the permission for the playback of the programme that will be recorded. There are three options available, Use parental settings, Disallowed and Allowed. To set this option as Allowed, user should enter a PIN(*). This option is only available if the Timer Type is set to Record.

(*) Default PIN can be set to 0000 or 1234. If you have dened the PIN(is requested depending on the country selection) during the First Time Installation use the PIN that you have dened.

Press OK button to save the timer. Press RET/BACK button to cancel.

Editing a Timer

• Select the timer you want to edit by pressing Up or Down button.

• Press GREEN button to edit.

• When nished with editing, press OK button to save. You can press RET/BACK button to cancel.

Deleting a Timer

• Select the timer you want to delete by pressing Up or Down button.

• Press RED button.

• Select Yes by using Left or Right button and press

OK to delete the timer. Select No to cancel.

English - 30 -

Recording Conguration

This feature is not available in all countries. For the countries where this feature is available a USB

connected storage device will be required.

English

Recording Conguration

You can congure recording preferences using this menu. Press MENU button and select Settings by using Left or Right button. Then select Recording Conguration item in the sub-menu and press OK button. The following menu will be displayed.

Start early: You can set recording timer’s starting time to start earlier by using this setting.

End late: You can set recording timer’s end time to end later by using this settings.

Max Timeshift: This setting allows you to set the maximum time allowed for timeshifting. Duration options are approximate and can change accordingly, depending on the broadcast received.

Auto Discard: You can set the Discard type as None, Oldest, Longest or Shortest. If the Discard type is not set to None, you can set the Unplayed option as Included or Excluded.

Hard disk information: You can view detailed

information about the USB storage device connected to your TV.

Format Disk: If you want to delete all les on the connected USB storage device and convert the disk format to FAT32, you can use this option.

Press OK button while the Format Disk option is highlighted. A menu will appear on the screen, requiring you to enter the PIN(*). After you enter the PIN, a conrmation message will be displayed.Select YES and press OK to start formatting the USB storage device. Select NO and press OK to cancel.

(*) Default PIN can be set to 0000 or 1234. If you have dened the PIN(is requested depending on the country selection)

English - 31 -

during the First Time Installation use the PIN that you have dened.

IMPORTANT:

Note 1: ALL the data stored on the USB storage

device will be lost and then the disk format will be converted to FAT32 if you activate this feature. Ensure that you backed up important recordings or data in the device before you format it.

Note 2: The USB storage device will not work on other media players if formatted on the TV

English

Setting Date/Time

Source Settings

Conguring Date/Time Settings

You can congure date/time preferences by using

this menu screen.

• Select Date/Time in the Settings menu to congure Date/Time settings. Press OK button.

Use Up or Down button to highlight the Time Settings

Mode. It can be set to Auto or Manual.

When Auto is selected, Date, Time and Time Zone

options will not be available to be set. If Manual option is selected as the Time Zone can be altered:

Press Up or Down button to select Time Zone.

Use Left or Right button to change the Time Zone between GMT-12 or GMT+12. Date/Time on the top of the menu list will then change according to the selected Time Zone.

Note: For countries without Digital channels, only the Date and Time option will be displayed.

Conguring Source Settings

You can enable or disable selected source options. The TV will not switch to the disabled source options when the

“SOURCE - ” button is pressed.

• Select Sources in the Settings menu and press OK button.

• Press Up or Down buttons to select a source.

• Use Left or Right button to enable or disable the selected source. Changes are automatically stored.

Input Selection

Use the Input Selection window if the television does not switch over to a connected source automatically.

Press “SOURCE - ” button on your remote control for directly changing sources. Use the Up or Down button to highlight an input and press Right or OK button to select.

English - 32 -

Other Controls

English

Conguring Other Settings - General

You can congure the settings of your TV. Select

Settings from main menu and press OK to view the Settings menu. Press the MENU button on the remote control to exit.

To view general conguration preferences, select Other Settings in the Settings menu and press OK button.

Operation

• Press Up or Down button to select an item.

• Use Left or Right button to set an option or press

OK button to view a sub-menu.

Menu Timeout

To set a specic display timeout for menu screens,

set a value for this option.

In the Other Settings menu, select Menu Timeout and choose 15 sec, 30 sec, 60 sec or Off using Left

or Right button.

Scan Encrypted Channels

When this setting is set as Yes, search process will locate the encrypted channels as well. If it is set as No manually, encrypted channels will not be located while in automatic search or manual search. Scan Encrypted Channel feature will always be Yes after

performing rst time installation.

• In the Other Settings menu, use Up or Down button to select Scan Encrypted Channels.

• Press Left or Right button to set this function as

Yes or No.

English - 33 -

Hbb TV

If you set this option to On, HbbTV services such as catch-up services, video-on-demand, EPG, games will be available if the broadcast supports. You can disable this feature by setting this option to Off.

Blue Background

If the signal is weak or absent, the TV will automatically change to a blue screen. To enable this, set Blue Background to On.

• In the Other Settings menu, select Blue Background and choose On or Off using Left or Right button.

Software Upgrade

This feature helps to keep your TV updated. It works automatically and searches for new information when available.

You can enable or disable automatic upgrade by setting the Automatic Scanning option.

You can manually start searching for new software by selecting Scan for upgrade and pressing OK button.

Press RET/BACK or MENU button to cancel the process.

Application Version

Displays the current software version.

Hard of Hearing

If the broadcaster enables any special signal concerning the audio, you can set this setting as On to receive such signals.

• Use Up or Down button to select Hard of Hearing and then press Left or Right button to set this setting as On or Off.

Audio Description

Audio description refers to an additional narration track for blind and visually impaired viewers of visual media, including television and movies. The description narrator talks through the presentation, describing what is happening on the screen during the natural pauses in the audio (and sometimes during dialogue, if deemed necessary). You can use this feature, only if the broadcaster supports that additional narration track.

English

Other Controls - continued

• Highlight Audio Description by pressing Up or Down button.

• Press OK button to enter Audio Description submenu.

• Use Up or Down button to select Audio Description setup and then press Left or Right button to set this setting.

Auto TV Off

You can set the timeout value of auto off feature. After the timeout value is reached and the TV is not operated for selected time, the TV will go off. Press MENU button and select Settings by using Left or Right button. Press

OK button to continue. Use Up or Down button to select Other Settings and then press OK button. Select Auto TV Off using Up or Down button.

Standby Search (optional)

If the Standby Search is set to On and the TV is in standby mode, the TV will look for any changes in the saved channels. Press MENU button and select Settings by using Left or Right button. Press OK button to continue. Use Up or Down button to select

Other Settings and then press OK button. Select Standby Search using Up or Down button and use Left or Right button to set.

Store Mode

If you set Store Mode to Enabled, your TV’s features will be illustrated on the top of the screen. To deactivate this feature, set to Disabled.

Media Renderer

This feature allows to share/play files stored in a compatible mobile device on the TV. Install an appropriate software on your device and read instructions of the sharing software for more information. Highlight Media Renderer and press

Left or Right button to enable or disable.

Power Up Mode

This setting congures the power up mode preference.

Standby: The TV always powers up in Standby mode. Last State: The TV always switches on with the last

selected channel/source.

Virtual Remote

This function allows to control the TV via a wireless handheld device. Enable the Virtual Remote feature by pressing Left or Right button.

• Download a virtual remote controller application from the server of your mobile device application provider.

English - 34 -

• Connect the TV and the mobile device to the same

network. Refer to the Network Settings section to make the connection properly.

This feature may not be supported on all mobile devices.

CEC

This function allows to control the connected HDMICEC compatible devices with the remote control of the TV. Press Left or Right button to enable the feature.

Select the HDMI input of the connected device from the source menu. The TV remote is automatically able to control most functions of the device (navigate menus, change channels, launch the disc etc.).

To terminate this operation and control the TV via the remote again, press QUICK button on the remote, highlight the CEC RC Passthrough and set as Off by pressing Left or Right button. To control the CEC device again set the CEC RC Passthrough option as On. It is also possible to disable this feature in the conguration menu of the connected HDMI device. Refer to the operating instructions of the related device.

CEC operation is available if a CEC device is present. The CEC osd menu is accessed through the QUICK button on the remote. The CEC osd menu will only be displayed if a CEC product is connected.

CEC Auto Power On

This function allows the connected HDMI-CEC compatible device to turn on the TV and switch to its input source automatically.

Press Left or Right button to enable or disable the feature.

Note: The audio device should support System Audio Control feature and CEC option should be set as Enabled.

Network Settings, Portal, Internet Browser and YouTube

English

Conguring Network Settings

Press the MENU button to open the main TV menu. Highlight Settings by pressing Left or Right buttons and press OK to enter. Highlight Network Settings and press OK. While Network Type is highlighted, press Left or Right buttons to select connection type. Then highlight Network. Press Left or Right buttons and set as Enabled to enable the connection.

If you are going to make a wireless connection for the rst time, press YELLOW button to search for available networks. If there is no presaved wireless prole on the TV, the TV will also search for available networks when set as Enabled. Choose a network from the list and press OK. You may have to enter a password if the selected network is passwordprotected. Enter the password and choose OK on the virtual keyboard and press OK.

Wait a while and Conguration Status will change to Connected. IP address and Network name will appear, which means that the connection is done.

First enter to Toshiba Portal

At rst time the “ ” button is pressed, the TV downloads and installs the latest version of the portal if available. Then the introduction page of the portal setup wizard will be displayed. Press OK to proceed.

Next step is End User License Agreement(EULA). The user have to scroll the whole text down to the end and check the box next to Agree by highlighting it and pressing the OK button. This means that the user accepts the agreement. Now, the user can highlight Next and proceed by pressing OK.

The user can skip the rest and portal page will be displayed. Account and profile settings can be configured later from the Settings menu on the portal.

Using the Toshiba Portal

You need to congure a home network before using

this feature.

Toshiba Portal is a service, where content (web sites, applications, online services etc.) can be viewed across the web through a simple user interface.

Press “ ” button on the remote. Select the desired application using the navigation buttons. Press OK to launch the application or go to related link. This can

take up to a minute or two to connect.

From the portal page, the user can also access to the media les stored on USB storage devices connected to the TV or on the media servers in the same network.

NOTES:

• Some applications may require an always-on broadband internet connection, rmware update and/or additional bandwidth dedicated to this product.

• Third party internet services may change, be discontinued or restricted at any time.

• Use of third party internet services may require registration by a computer and if needed payment of charges and membership.

• Service content and the interface may be changed at any time without prior notice.

Toshiba makes no warranties about the content, availability or functionality of third-party content or services.

Using the Internet Browser

To use the internet browser, enter the portal rst. Then launch the Internet application on the portal.

Predened web sites and logos will be displayed on the browser’s opening page to provide quick access. The user can add desired websites to the quick access page. To add a new quick access item, point the cursor to “ ” whilst on the website and press OK. A submenu will be opened. Then point the cursor to “ ” and press OK. On the next window, point the cursor to one of the quick access items and press OK to replace it with the new one.

To visit a web site move the cursor to the adress bar using the navigation buttons on the remote and press OK. The virtual keyboard will be opened in a new window.

Enter the URL in the adress bar. Point the cursor to “ ” button and press OK.

To make a search on internet, enter a keyword in the adress bar. Point the cursor to “ ” button and

press OK.

Press the BACK button to close the virtual keyboard or to go to previous page in the browser.

Press the “ ” button to turn back to portal home page.

English - 35 -

Network Settings, Portal, Internet Browser and YouTube -

English

Press the EXIT button to close the portal and watch TV again.

NOTES:

• The virtual keyboard or numeric buttons on the remote, which are assosiated with the letters of the alphabet, can be used for entries.

• The browser does not support multiple tabs.

• Some internet pages include ash content. These are not supported by the browser.

• The TV does not support any download processes from the web browser.

Using YouTube

You need to congure a home network before using

this feature.

This TV allows you to view Youtube content.

Press “Mybutton1 - ” to connect YouTube directly. You can also press “ ” button on the remote and launch the YouTube application on the portal to access YouTube.

NOTES:

• Depending on the network environment and use case, you may experience difculty viewing the content.

• It may take time for the TV to load and begin playing back the content.

• Service content and the interface may be changed at any time without prior notice.

continued

English - 36 -

Using 3D Feature

Side By Side

(SBS)

English

IMPORTANT: Before using the 3D feature of your TV, read the Cautions for 3D section in the back of the manual.

Operating the 3D Mode “3D”

Press the MENU button on the remote and select the Picture icon using the Left or Right buttons. Press OK button to view Picture Settings menu. Use Up

or Down buttons to select 3D Settings and press OK to view. For quick acces to 3D Settings menu just press the 3D button on the remote.

Notes:

• You should select suitable 3D Mode before viewing.

If appropriate mode is not selected, 3D image can not be correctly displayed.

• The 3D picture may not be visible or become

distorted when watching under intense light conditions.

• If you experience screen ickering when watching

3D images in poor light conditions, you should turn the lamp off or dim the light.

• To view 3D contents or programmes in 3D mode

you should wear the active 3D shutter eyewear that supports Bluetooth™ wireless technology. Note that this TV’s 3D feature works only with its specic 3D eyewear.

• Use the 3D eyewear where there is no interference

from other Bluetooth™ or Wireless LAN devices.

LITHIUM BATTERY CAUTION

Danger of explosion if battery is incorrectly replaced. Replace with the same or equivalent type.

Using the 3D Eyewear

Refer to the manual of the 3D eyewear before use for detailed information and instructions on usage.

Before using you should pair the eyewear with your TV. Press the power button on the eyewear to turn it on. You can enjoy viewing 3D images now by wearing the 3D eyewear. Turn off the eyewear after using it. The 3D eyewear may not operate correctly at the outside of the viewing range. Use the 3D eyewear within the viewing range. The range may be shortened depending on the obstacles between the TV and the 3D eyewear, or the surrounding environment.

Cleaning and maintenance of the 3D eyewear

• Do not apply spray cleaners directly onto the surface

of the 3D eyewear.This may result in discoloration and cracks and may cause the screen display to peel off.

• Make sure the cleaning cloth is soft and does not

contain any foreign material or dust. Using a dirty cloth will damage your 3D eyewear.

• Do not drop or bend the 3D eyewear.

Incoming video signals can either be in 2D or 3D format. A 2D signal can be viewed in either 2D or 3D, and 3D can be viewed in either 2D or 3D. If the 3D Mode option in the 3D Settings menu is set to Auto, the TV can detect the 3D signal and change to 3D mode automatically. Otherwise you can change the viewing mode from the 3D Settings menu. Press the

3D button on the remote for quick access to the 3D Settings menu.

The format of the 3D signal can be either Side By Side (SBS) or Top Bottom (TB). You may have to choose the correct format using the 3D Settings menu if the TV can not detect it automatically. Moreover, when viewing in 2D, you can change 2D images to 3D images by enabling the Virtual 3D option in the 3D Settings menu.

3D format Description

Top Bottom (TB)

Changing 3D format from the Quick menu

Press the QUICK button on the remote to open the quick menu. Press Up or Down buttons to select 3D

Mode option. Press Left or Right buttons to set the 3D Mode.

First off all the TV should be in 3D mode. This means the TV should receive 3D image and 3D Mode shouldn’t be set to Off or Game. Press the 3D button on the remote to open 3D Settings menu quickly. Select 2D Only option using the Up or Down buttons. Press Left or Right buttons to set 2D mode as Left, Right or Off.

Press the 3D button on the remote to open 3D Settings menu quickly. Select Virtual 3D option using the Up or Down buttons. Press Left or Right buttons to set as Low, Medium, High or Off.

The left and right eye shutter timing of the glasses can be swapped. If 3D images look blurred, switch the left and right sides of the 3D image. Press the 3D button on the remote to open 3D Settings menu quickly. Select Left/Right Swap option using the Up or Down buttons. Press Left or Right buttons to set as Left/Right or Right/Left.

English - 37 -

Viewing 3D images

Images for the left and right eyes are positioned side-by-side.

Images for the left and right eyes are positioned at the top and bottom of the screen.

Watching 3D images in 2D format

Watching 2D images in 3D format

Switching left and right images

English

Using 3D Feature - continued

3D Settings

3D Important Info

Highlight 3D Important Info and press OK button on the remote to display safety precautions for 3D viewing.

3D Mode

You can customize the 3D mode settings to provide the best viewing experience. Select one of the following modes to experience 3D image viewing:

Auto: Automatically switches to 3D mode if 3D information is detected from a digital broadcast or a HDMI source.

Side by Side: Displays 3D content which is originally in a form of side by side.

Top bottom: Displays 3D content which is originally in a form of top and bottom.

Game: When playing 1:1 games on your TV, each player can enjoy the game with a full screen using this feature. To do this, the game you want to play has to support Dual Play. And you need to put on the proper Dual Play glasses(sold separately). If a problem occurs by using Game mode, turn off/on the connected game console rst and try again. Even if the game doesn’t support dual play, in certain splitscreen games it is possible to use dual play feature by setting the TV’s 3D Mode to Side by Side or Top Bottom according to the split screen type that the game includes.

Off: 3D function mode is turned off.

2D Only

If content is 3D but you want to watch it in 2D, you can switch to 2D Only mode. There are 2 options (LEFT and RIGHT) to select which side of the content you want to watch in 2D.

Virtual 3D

Conversion from 2D to 3D. You can enable or disable this feature by setting as Low, Medium, High or Off.

Left/Right Swap

You can use this setting to shift the phase of the 3D left/right broadcast.

3D Depth Sense

This setting enables the control of 3D depth.

3D Viewing Information

Refer to the size/distance guidelines below to experience 3D in the best possible way.

Viewing Distance

Size

22 26 32 37 40 42 46 47 48 55

(inch)

Viewing

distance

0,8 0,95 1,2 1,35 1,45 1,55 1,7 1,75 1,8 2

(m)

Horizontal Viewing Angle

Vertical Viewing Angle

It is strongly recommended that the eye level of the viewer should be same height as the center of the TV. In case that is not possible, tilt the TV accordingly in its stand or wall mount. The picture may not be visible or may look dark if you do not stay within the viewing angle.

English - 38 -

Using 3D Feature - continued

MBV

DTV

Supported 3D Content Resolutions

HDMI,

1080p@24 FP

720p@50 FP

720p@60 FP

1080p FC

720p FC

1080i FC

OTHER

Supported Not Supported Not Supported

SBS, TB SBS, TB SBS, TB

SBS SBS SBS

Not Supported (*) Not Supported

Please note that if you apply 720p FC TB input; the picture will be scaled smaller than the original

size in the middle of the screen.

SBS: Side By Side

TB: Top Bottom

MBP: Media Browser Picture

MBV: Media Browser Video

FC: Frame Compatible

FP: Frame Pack

in MBP: Supported only when, the image’s height

is multiples of 2 and the image’s width is multiples of 16 and if the image width is equal to the panel width or wider.

in DTV: Supported only when, the image’s height is between 1700 and 1900 and the image’s width is equal to 1280 or 720.

(*): Not supported if the image provides 1080i resolution.

MBP,

OTHER

English

English - 39 -

USB Record Feature

This feature is not available in all countries. For the countries where this feature is available a USB

English

connected storage device will be required.

This feature allows you to record and play back digital broadcast contents stored on a USB storage device. Before you use this function, connect a USB storage device to the TV rst while the TV is switched off. You should then switch on the TV to enable the recording feature.

Instant Recording

Press REC button to start recording an event instantly while watching a programme. When “Press record to add more events” message is displayed on the screen, you can press REC button on the remote control again to add the next event on the Programme Guide to Timers list to be recorded.

In this case, an OSD will be displayed, indicating the programmed events for recording. Press Stop button to cancel instant recording.

You can not switch broadcasts or view the Media Browser menu during the recording mode. While recording a programme or during the timeshifting, a warning message appears on the screen if your USB device speed is not sufcient.

Timeshift Recording

Press Pause button while watching a broadcast to activate timeshifting mode. In timeshifting mode, the programme is paused and simultaneously recorded to the connected USB storage device.

Press Play button again to resume the paused programme from where you stopped. Press the Stop button to stop timeshift recording and return to the live broadcast.

Timeshift cannot be used while in radio mode.

Watching Recorded Programmes

Select the Recordings from the Media Browser menu. Select an item from the list (if previously recorded). Press the OK button to view the Play options menu. Select an option then press OK button.

Press the Stop button to stop a playback and return to the Recordings menu.

Note: Viewing main menu and menu items will not be available during the playback.

Slow Forward

If you press Pause button while watching recorded programmes, the slow forward feature will be available. You can use “Rapid advance - ” button to slow forward. Pressing this button consecutively will change slow forwarding speed.

About the USB Record Feature

• Recorded programmes are saved into the connected USB storage device. If desired, you can store/copy recordings onto a computer; however, these les will not be available to be played on a computer. You can play the recordings only via your TV.

• The TV supports only FAT32 formatted USB storage devices for recording functions. If this is not the case, the USB storage device should be formatted rst using the Format Disk option in the Settings/Recording Conguration menu.

• To use recording feature your USB storage device should have at least 2 GB free space and be USB

2.0 compatible. If the USB storage device is not compatible an error message will be displayed.

• If the writing speed of the connected USB storage device is not sufcient, the recording may fail and the timeshifting feature may not be available.

• It is recommended to use USB storage devices with high storage capacities for recording HD programmes.

• Lip Sync delay may occur during the timeshifting. Radio record is supported. The TV can record programmes up to ten hours.

• Recorded programmes are split into 4GB partitions.

• Do not plug out the USB storage device during a recording. This may harm the connected USB storage device.

• Multipartition support is available. A maximum of two different partitions are supported. The rst partition of the USB storage device is used for PVR ready features. It also must be formatted as the primary partition to be used for the PVR ready features. It is recommended to use a non-partitioned usb storage device.

• Some stream packets may not be recorded because of signal problems, as a result sometimes the picture may freeze during playback.

• Record, Play, Pause, Display (for PlayListDialog) keys can not be used when teletext is ON. If a recording starts from timer when teletext is ON, teletext is automatically turned off. Also teletext usage is disabled when there is an ongoing recording or playback.

English - 40 -

Using Media Browser

This TV allows you to enjoy photo, music or video les stored on a USB device or media server.

English

Manual Start

To display Media Browser window, press the “

” button on the remote control. The Media Browser menu is also accessable from the main menu. Press

the MENU button on the remote. Select Media Browser by pressing Left or Right button and press OK.

Select the media type to be listed and press OK.

If there is more than one media source available, a list of devices and servers will be displayed. Highlight the device or server from the list and press OK.

Auto Start

When you plug a USB storage device, the following menu will be displayed.

You can play or view music, video and picture les from an USB storage device connected to the USB port.

Moreover you can also play or view music, video and picture les from a media server on the same network.

To display the les with folders, select Settings tab and change View Style to Folder. So the selected type of les in the selected folder will be displayed. Additionally the All tab will be added to the main Media Browser menu. To list all available music, video and picture les in the selected folder at once, select All tab and press OK button.

If View Style is set to Flat, all selected type of les will be listed. If for instance, Video is selected in the main Media Browser menu, TV will search the source for all video les and list them.

Note:

Some USB compliant devices may not be supported.

If the USB storage device is not recognized after power off/on or First Time Installation, plug the USB device out and power off/on the TV set. Then plug it in again.

English - 41 -

• Do not use a USB Hub.

• You must obtain any required permission from

Toshiba cannot and does not grant such permission.

• Depending on the le size and amount in your USB

storage device or media server, it may take some time for loading to view. A message will be displayed on the screen when loading les from the USB device or media server.

• Only limited types of USB devices are supported.

Therefore, it is suggested not to use USB for playing Media Player.

• Non-supported characters will be replaced with a

square (□).

English

Using Media Browser - continued

This TV allows you to enjoy photo, music or video les stored on a USB device or media server.

Playing MP3 Files

To play mp3 les from a USB memory or media server,

you can use this menu screen.

• / : Navigate menu.

• Play ( button): Start to play all files listed

beginning with the selected one.

• Stop ( button): Stop the playback.

• Pause ( button): Pause/Resume the playback.

• Red button: Sort les by Title, Artist or Album.

Note: If the Viewing Style in Media Browser Settings menu is set to Folder, the les will be displayed as

sorted and there is no need to sort les again by

pressing the RED button. In that case the RED button will not function anyway.

• Loop/Shufe (Green button): Press once to enable Loop. Press again to enable both Loop and Shufe. Press once more to disable Loop. Press again to disable Shufe. You can follow the disabled and enabled functions with the change of the icons.

• Jump (Numeric buttons): Type the le number using the numeric buttons on your remote to jump to a le directly. The le with the typed number will be only highlighted and will not be played.

• Play This (OK button): Play the selected le.

• Previous/Next (Left/Right buttons): Jump to

previous or next le and play.

• Yellow button: Change viewing style.

• Blue button: Change media type.

• Swap button: Open the Device Selection menu.

This option appears only when more than one media source is detected.

Viewing JPEG Files

To view photo les from a USB Memory or media

server, you can use this menu screen. When you select Photos in the main Media Browser menu,

available image les will be ltered and listed on this

screen.

• / : Navigate menu.

• Jump (Numeric buttons): Type the le number

using the numeric buttons on your remote to jump to a le directly.

• OK: View the selected image in full-screen.

• Slideshow ( button): Start the slideshow to view

all the images automatically.

• Green button: View the images in thumbnails. Press

again to turn back to previous layout.

• Red button: Sort les by date.

• Yellow button: Change viewing style.

• Blue button: Change media type.

• Swap button: Open the Device Selection menu.

This option appears only when more than one media source is detected.

English - 42 -

Using Media Browser - continued

This TV allows you to enjoy photo, music or video les stored on a USB device or media server.

English

Slideshow Feature

You can use this feature to display all images automatically on your USB device or media server.

• Pause ( button): Pause the slideshow.

• Continue ( button): Continue the slideshow.

• Loop/Shufe (Green button): Press once to enable

Loop. Press again to enable both Loop and Shufe. Press once more to disable Loop. Press again to disable Shufe. You can follow the disabled and enabled functions with the change of the icons.

• Previous/Next (Left/Right buttons): Jumps to

previous or next le on slideshow. When pressed, the slideshow pauses.

• Rotate (Up/Down buttons): Rotate the image using

up/down buttons. When pressed, the slideshow pauses.

• Return/Back: Back to le list.

• Info button: Display info bar.

• 3D Settings (3D button): Press to view 3D Settings.

Video Playback

When you select Videos from Media Browser menu,

available video les will be ltered and listed on this

screen. You can use Up or Down button to select a video le and press OK button to play a video.

/ : Navigate menu.

LANG - (Play Preview): Display selected le in

a small preview screen. Press again to stop preview.

Red button: Sort les by name. Play ( button): Start to play all les listed beginning

with the selected one.

Yellow Button: Change viewing style. Loop/Shufe (Green button): Press once to enable

Loop. Press again to enable both Loop and Shufe. Press once more to disable Loop. Press again to disable Shufe. You can follow the disabled and enabled functions with the change of the icons.

Blue: Change media type.

Swap button: Open the Device Selection menu.

This option appears only when more than one media source is detected.

Play ( button): Start the video playback.

Stop ( button): Stop the video playback.

Pause ( button) : Pause the video playback.

Rewind ( button): Goes backward.

Forward ( button): Goes forward.

3D Settings (3D button): Press to view 3D Settings.

Previous/Next (Left/Right buttons): Plays the

previous/next le.

Subtitle/Audio (LANG - button): Set Subtitle/ Audio.

Green: Jumps to the selected time.

Ret/Back: Back to le list.

Yellow: Open subtitle time correction menu.

Note: If you select a subtitle le and press OK button, you can select or deselect that subtitle le.

Jump (Numeric buttons): Type the le number using the numeric buttons on your remote to jump to a le directly. The le with the typed number will be only highlighted and will not be played.

Play This (OK button): Play the selected le.

English - 43 -

Press OK to conm.

Press BLUE button to clear.

Press RET/BACK button to switch back to previous menu.

Using Media Browser - continued

English

This TV allows you to enjoy photo, music or video les stored on a USB device or media server.

Note:

You can set subtitles by using “LANG - ” button during the playback. Selected subtitles may not be displayed correctly in some cases.

In order to display movie subtitles correctly, you should set a subtitle language. See the section, Media Browser Settings for selecting movie subtitle language.

Recordings

You can play back, edit or delete previously recorded programmes stored on the USB storage device using Recordings menu.

To display Recordings menu, Press the MENU button on the remote. Select Media Browser by pressing Left or Right button and press OK. Select Recordings and press OK. Recordings menu will then be displayed with available recordings.

IMPORTANT: To view the previously recorded programmes in the Recordings window, you should

rst connect the USB storage device to your TV in

which the programmes are stored.

• Play from start: Plays the selected recording from

the beginning.

• Resume: Recommences the selected recording.

• Play from offset: Species a playing point for the

selected recording.

Resume ( button): Recommences the recording. Details (INFO - button): Displays information on

the selected recording.

Media Browser Settings

All the recordings are kept in a list. Select an item from the list by using Up or Down button.

Red button: Erases the selected recording.

Green button: Makes changes on the Delete and Playback options of the selected recording .

Blue button: Changes the order of the recordings.

You can select from a wide range of sorting options.

OK button: Opens the Play options menu. Select an option by using Up or Down and press OK.

English - 44 -

You can set your Media Browser preferences by using the Settings dialogue. Press Up or Down button to highlight an item and use Left or Right button to set.

View Style: Set default browsing mode. Set as Flat to list all selected type of les stored in the USB device or media server. Set as Folder to list all selected type of les in the selected folder.

Slideshow Interval: Set slide show interval time.

Show Subtitle: Set subtitle enabling preference.

Subtitle Language: Set supported subtitle language.

Subtitle Position: Set subtitle position as Up or Down.

Subtitle Font Size: Set subtitle font size.

Using Media Browser - continued

This TV allows you to enjoy photo, music or video les stored on a USB device or media server.

Using MENU button in Media Browser Mode

Pressing MENU button while in Media Browser mode displays the following menu screen:

You can access Picture, Sound and Settings menu options using this screen. Press MENU again to exit from this screen.

To Close the Media Player

• Press EXIT button on the remote control.

English

English - 45 -

English

Analogue Only Text Services

This television has a multi-page text memory, which takes a few moments to load.

Analogue Text Services

Before using the text services, the required language region must be chosen.

• Select Language from the Settings menu.

• Highlight Teletext in the Language Settings menu and press Left or Right button to choose the

required language region.

After the Teletext language is selected, press MENU button to exit.

Using Text Button -TEXT

• To view text services press TEXT. Press TEXT again to superimpose text over a normal broadcast picture.

• Press TEXT again to return to normal viewing.

• Programmes cannot be changed until text is cancelled.

• The rst text page shown will be the initial page.

• Any text page can be accessed by entering the 3 digit page number using the numbered buttons. Press P / or Up/Down buttons to go to the next/ previous page.

• Four coloured titles will appear at the base of the screen. To access one of the four given subjects, press the relevant coloured button on the remote control.

• For further information on your particular text system(s), see the broadcast text index page or, consult your local Toshiba dealer.

Below is a guide to the functions of the remote control text buttons.

Acessing Sub-Pages

If a text page has sub-pages, press Left/Right buttons or enter the sub-page number 0001, 0002, 0003 etc. to access.

Revealing Concealed Text

To discover the solutions on quiz and joke pages press the “INFO - ” button.

Holding a Page

At times it is convenient to hold a page of text. Press OK and “HOLD” will appear in the top left of the screen. The page will be held on screen until the button is pressed again.

To display an initial page

Press RET/BACK to access an initial page. The one displayed is dependant on the broadcaster.

English - 46 -

Appendix A: PC Input Typical Display Modes

The following table is an illustration of some of the typical video display modes. Some, due to the display native resolution, are scaled automatically to enable correct image to be displayed.

Your TV may not support different resolutions. Supported resolution modes are listed below.

If you switch your PC to an unsupported mode, a warning OSD will appear on the screen.

English

Index Resolution Frequency

1 640x400 70Hz

2 640x350 85Hz

3 640x400 85Hz

4 640x480 60Hz

5 640x480 66Hz

6 640x480 72Hz

7 640x480 75Hz

8 640x480 85Hz

9 800x600 56Hz

10 800x600 60Hz

11 800x600 70Hz

12 800x600 72Hz

13 800x600 75Hz

14 800x600 85Hz

15 832x624 75Hz

16 1024x768 60Hz

17 1024x768 66Hz

18 1024x768 70Hz

19 1024x768 72Hz

20 1024x768 75Hz

21 1024x768 85Hz

22 1152x864 60Hz

23 1152x864 70Hz

Index Resolution Frequency

24 1152x864 75Hz

25 1152x864 85Hz

26 1152x870 75Hz

27 1280x768 60Hz

28 1360x768 60Hz

29 1280x768 75Hz

30 1280x768 85Hz

31 1280x960 60Hz

32 1280x960 75Hz

33 1280x960 85Hz

34 1280x1024 60Hz

35 1280x1024 75Hz

36 1280x1024 85Hz

37 1400x1050 60Hz

38 1400x1050 75Hz

39 1400x1050 85Hz

40 1440x900 60Hz

41 1440x900 75Hz

42 1600x1200 60Hz

43 1680x1050 60Hz

44 1920x1080 60Hz

45 1920x1200 60Hz

English - 47 -

Appendix B: AV and HDMI Signal Compatibility (Input Signal Types)

Signals

English

Source

EXT

(SCART)

Side AV

YPbPr

HDMI

Supported

PAL O

NTSC 60 O

RGB 50/60 O

SECAM O

PAL 50/60 O

NTSC 60 O

SECAM O

480I 60Hz O

480P 60Hz O

576I 50Hz O

576P 50Hz O

720P 50Hz O

720P 60Hz O

1080I 50Hz O

1080I 60Hz O

480I 60Hz O

480P 60Hz O

576I 50Hz O

576P 50Hz O

720P 50Hz O

720P 60Hz O

1080I 50Hz O

1080I 60Hz O

24Hz

1080P

25Hz

30Hz

50Hz

60Hz

Available

Note: In some cases a signal on the LCD TV may not be displayed properly. The problem may be an inconsistency with standards from the source equipment (DVD, Set-top box, etc.). If you do experience such a problem please contact your dealer and also the manufacturer of the source equipment.

English - 48 -

Appendix C: PIN Information

Before connecting any external equipment, turn off all main power switches. If there is no switch, remove the mains plug from the wall socket.

Signal information for Mini D-sub 15 pin connector

Pin No. Signal name Pin No. Signal name Pin No. Signal name

1 R 6 Ground 11 NC

2 G 7 Ground 12 NC

B 8 Ground 13 H-sync

NC* 9 NC 14 V-sync

NC 10 Ground 15 NC

* NC = not connected

English

English - 49 -

Appendix D: Supported File Formats for USB Mode

English

Media Extension Format Notes

Video Audio

Movie .dat, .mpg,

Music .mp3

Photo

Subtitle

.mpeg

.ts, .trp, .tp, .m2ts

.vob MPEG2 MPEG1/2 Layer 1/2/3,

.mkv MPEG1,2,4, XviD,

.mp4, .mov MPEG1/2 Layer 3, AAC/

.avi MPEG1,2,4

.a, .v H.264,

.3gp MPEG4, H.264 1920x1080@30P 20Mbit/sec

.asf, .wmv MPEG2,4, XviD, H.264,

.wav LPCM

.WMA/ASF WMA, WMA Pro

.m4a/ .aac AAC, HEAAC

.jpg, .jpeg

.png

.bmp

.sub - - Sub1, Sub2, Sub3

.srt - -

Mpeg1,2 MPEG1/2 Layer 1/2/3,

MPEG2 ,H.264, VC1, AVS,

MVC

H.264,

VC1,WMV3,

Motion JPEG

Xvid

H.264,

VC1,WMV3,

Sorenson H.263

Motion JPEG

Sorenson H.263

VC1,WMV3

AAC/HEAAC, AC3/EAC3, LPCM/ADPCM

MPEG1/2 Layer 1/2/3, AAC/HEAAC, AC3/EAC3, LPCM/ADPCM

AC3, LPCM

MPEG1/2 Layer 1/2/3, AAC/HEAAC,

AC3/EAC3, LPCM

HEAAC, AC3/EAC3, LPCM/ADPCM

MPEG1/2 Layer 1/2/3, AAC/HEAAC, AC3/EAC3, LPCM/ADPCM, WMA

MPEG1/2 Layer 3, AAC/ HEAAC, LPCM/ADPCM

MPEG1/2 Layer 1/2/3, AAC/HEAAC, AC3/EAC3,

LPCM, WMA

MPEG1/2 Layer 1/2/3 (MP3)

Baseline MAX WxH = 14592x12288

Progressive

non-interlace

interlace

1080P@30fps 50Mbit/sec

H.264:1080Px2@ 25fps 1080P@50fps MVC: 1080P@24fps Other: 1080P@30fps 50Mbit/sec

1080P@ 30fps 50Mbit/sec

H.264:1080Px2@25fps 1080P@50fps 1080P@30fps 50Mbit/sec

H.264: 1080Px2@25fps 1080P@ 50fps Other: 1080P@30fps 50Mbit/sec

H.264: 1080Px2@25fps 1080P@50fps 1080P@30fps 50Mbit/sec

H.264: 1080Px2@25fps 1080P@ 50fps 1080P@30fps 40Mbit/sec

1080P@ 30fps 50Mbit/sec

Up to 8 MegaByte

English - 50 -

Cautions for 3D

English

Important information for 3D viewing

CAUTION

• The 3D function has been designed for private

use and entertainment in your home environment. Please note that any commercial use of the 3D function could lead to copyright infringement of authors’ rights. Toshiba asks you to respect the intellectual property rights of third parties.

About handling the 3D glasses

• Do not leave the 3D glasses or the accessories

within the reach of small children. Inhaling or

swallowing them may cause suffocation or lesions in the stomach wall. If swallowed, consult a doctor immediately.

• Do not repair, modify, or disassemble the 3D

glasses by yourself. Doing so may cause you to

become indisposed while viewing 3D images.

• Do not expose the glasses to excessive heat

such as sunshine, re, or the like.

About the 3D glasses

• Do not use the 3D glasses if they are not working

properly or broken. Continuing to use them in such

a state may cause injury, eye strain, or indisposition. Do not use the 3D glasses if they are broken or have any cracks.

• Do not stand or walk while wearing 3D glasses.

You may lose your balance which could result in falls or other accidents.

• Do not wear the 3D glasses for any purpose other

than viewing 3D programming. 3D glasses do not

function as sunglasses.

• Do not drop, exert pressure on, or step on the 3D

glasses. Doing so may damage the glass section,

which may result in injury. Exposing the 3D glasses to liquid or excessive heat may damage the function.

• If your nose or temple turns red, or you feel

pain or discomfort, stop using the 3D glasses.

Such symptoms as above may occur if you keep wearing them for a long time, which may also cause indisposition.

Cautions on watching 3D images

• Some viewers may experience a seizure or

blackout when exposed to certain flashing images or lights contained in certain 3D television pictures or video games. Anyone who

has had a seizure, loss of awareness, or other

English - 51 -

symptoms linked to an epileptic condition, or has a family history of epilepsy, should contact a health care provider before using the 3D function.

• Avoid use of the 3D function when under the inuence of alcohol.

• If you are ill or feel ill, you should refrain from

viewing 3D images, and consult your health care provider as may be appropriate.

• If you experience any of the following symptoms

when viewing 3D video images, stop viewing and contact your health care provider: Convulsions,

eye or muscle twitching, loss of awareness, altered vision, involuntary movements, disorientation, eye strain, nausea/vomiting, dizziness, headaches.

• If you feel eye fatigue or other discomfort

from viewing 3D video images, remove the 3D glasses and discontinue use until the condition is eliminated.

• Viewing in 3D may cause dizziness and/or

disorientation for some viewers. Therefore,

to avoid injury do not place your TV near open stairwells, balconies, or wires. Also do not sit near objects that could be broken if accidentally hit.

• When viewing 3D images, always wear 3D

glasses. Watching 3D images without 3D glasses

may cause eye strain. Use specied 3D glasses.

• Do not wear 3D glasses or watch 3D images from

steep angles or while lying down. The 3D effect

is lost in these conditions and eye strain may result.

• Use the 3D glasses at the proper viewing angle

and distance. It is recommended that the viewer’s

eyes and 3D glasses are level with the screen.

• If you have prescription eye glasses or contact

lenses, wear the 3D glasses over them. Watching

3D images without appropriate eyewear may cause eye strain.

• If 3D images often appear in double or if you

cannot see the images in 3D, stop viewing.

Continuous viewing may cause eye strain.

• Due to the possible impact on vision

development, viewers of 3D video images should be age 6 or above. Children and teenagers may be

more susceptible to health effects from viewing 3D images and should be closely supervised.

English

Cautions and Other Information for 3D

• For optimal 3D effect and to avoid eye fatigue it is important that you properly select your viewing position. The best viewing position is with your

eyes at the same level as the center of the display

IMPORTANT: If you see a double image, your eyes are either too high or too low in relation to the horizontal center of the screen.

Adjust your position so that it is closer to the center to avoid eye fatigue and to enjoy optimum 3D effects.

• Watching TV while sitting too close to the screen for an extended period of time may cause eye strain. The ideal viewing distance should be at least

three times the screen height.

• Switching left and right images. The left and right eye shutter timing of the glasses can be swapped. If 3D images look blurred, switch the left and right sides of the 3D image.

Notes on watching the TV

• 3D effect and image quality may vary depending

upon content quality and display device capability/

functionality/settings.

• If you use any device, such as a mobile phone or

mobile wireless device, near the 3D glasses, the 3D glasses may not work correctly.

• Use the product in the following temperature

range; otherwise, the quality of the 3D image or the reliability of the product cannot be guaranteed.

– 3D glasses: 0 °C - 50 °C

– TV: 5 °C - 35 °C (41 °F - 94 °F)

• If you use a fluorescent light, it may flicker depending on the frequency of the light. In this

case, reduce the brightness of the uorescent

light, or use another light. (It is not recommended to watch the TV in a dark room, especially for children.)

• Wear the 3D glasses properly, otherwise you may not see the correct 3D image.

• When not viewing 3D images on this unit, take off the 3D glasses; otherwise, it may be difcult

to see the display on other products such as PC, digital clock or calculator, etc.

• To active the 2D to 3D conversion function set the Virtual 3D option in the 3D Settings menu as On.

• The 2D to 3D conversion function is meant for enjoyment of 2D home video, and other 2D content you create, in 3D according to your personal preferences.

Note: The effect you may see depends on Picture content.

• The 2D to 3D conversion function is not intended for use with pre-recorded 2D copyrighted content owned by a third-party unless the copyright owner has given direct or indirect permission, or unless applicable law permits such use.

About the connecting cable

• Use a high-speed and high-quality HDMI cable when you connect a device such as 3D compatible BD player or PC to the TV. When you use a standard HDMI cable, 3D images may not be shown.

English - 52 -

Specications and Accessories

48” T

Broadcast Systems/Channels

DVB-T MPEG2, DVB-T MPEG4 HD, DVB-C MPEG2, DVB-C MPEG4

Video Input PAL, SECAM, NTSC 4.43 Stereo Nicam

External Connections 1-SCART 1 Input 21-pin SCART RGB, A/V 2-SCART-2 Input 21-pin SCART RGB, A/V, S-Video 3-SIDE AV Input Side AV Cable input Video + Audio L + R 4-HDMI Input Type A 5-PC Input Mini D-Sub 15-Pin Analogue RGB Signal 6-Digital Audio Output S/PDIF (Optical) 7-YPbPr Input Y+Pb+Pr Video RCA 8-Audio In Input RCA Audio L + R 9-LAN port RJ-45 10-Subwoofer Output RCA Audio USB Ports Media Browser Interface Version: USB 2.0

USB Class: Mass Storage File System: FAT32

For sets with built in wireless unit the Home network with a wireless router must be compatible with; IEEE 80211 a/b/g/n

Security Protocols WEP 64/128, WPA, WPA2, TKIP, AES, WAPi.

Headphone Socket 3.5mm stereo Operating Conditions Temperature 5°C - 35°C (41°F - 94°F)

Humidity 20 - 80% (non-condensing) Supplied Accessories Remote Control 2 batteries (AAA,IEC R03 1.5V) Four screws Side AV cable Stand xing cover P Clip 2 Active Shutter 3D Glasses

English

Energy Efciency Class A ++

Visible Screen Size (approx.) 121 cm / 48”

On Mode Power Consumption (approx.) (*) 44 W

Annual Power Consumption (approx.) (**) 64 kWh

Standby Power Consumption (approx.) < 0.50 W

Screen Resolution (pixels) 1920 x 1080

Display 16:9

Sound Output (at 10% distortion) 2 x 8

Power Consumption Model (approx.) 90 W

Weight TV with stand 18.5 kg

Gross weight 24.0 kg

TV without stand 15.5 kg

(*) Tested in accordance with IEC 62087-BD in default settings.

(**) Energy consumption 64 kWh per year, based on the power consumption of the television operating 4 hours per day for 365 days. The actual energy consumption will depend on how the television is used.

Unit Dimensions (Approximate)

Specication is subject to change without notice.

48T543*DG 1092.2 643.5 250.1 105.4 697.7 400.0 400.0

A (mm) B (mm) C (mm) D (mm) E (mm) F (mm) G (mm)

English - 53 -

License Information

• The terms HDMI and High-Denition Multimedia Interface, and the HDMI Logo are trademarks or registered

English

trademarks of HDMI Licensing LLC in the United States and other countries.

• DVB is a registered trademark of the DVB Project.

• [1] EIA/CEA-861-D compliance covers the transmission of uncompressed digital video with high-bandwidth digital content protection, which is being standardized for reception of high-denition video signals. Because this is an evolving technology, it is possible that some devices may not operate properly with the television.

• YouTube and the YouTube logo are trademarks of Google Inc.

MP3 licence letter

MPEG Layer-3 audio coding technology licensed from Fraunhofer LLS and Thomson.

MP4 licence letter

THIS PRODUCT IS LICENSED UNDER THE MPEG-4 VISUAL PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER FOR (I) ENCODING VIDEO IN COMPLIANCE WITH THE MPEG-4 VISUAL STANDARD (MPEG-4 VIDEO) AND/OR (II) DECODING MPEG-4 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED BY MPEG LA TO PROVIDE MPEG-4 VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION INCLUDING THAT

RELATING TO PROMOTIONAL, INTERNAL AND COMMERCIAL USES AND LICENSING MAY BE OBTAINED

FROM MPEG LA,L.L.C. SEE HTTP://WWW.MPEGLA.COM

AVC licence letter

THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND

NON-COMMERCIAL USE OF A CONSUMER TO (I) ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD (“AVC VIDEO”) AND/OR (II) DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA,L.L.C. SEE HTTP://WWW.MPEGLA.COM

Licence Notication

TRADEMARK ACKNOWLEDGMENT

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

Disposal...

The following information is only for EU-member states:

Disposal of products

The crossed out wheeIed dust bin symbol indicates that products must be collected and disposed of separately from household waste. Integrated batteries and accumulators can be disposed of with the product. They will be separated at the recycling centres. The black bar indicates that the product was placed on the market after August 13, 2005. By participating in separate collection of products and batteries, you will help to assure the proper disposal of products and batteries and thus help to prevent potential negative consequences for the environment and human health. For more detailed information about the collection and recycling programmes available in your country, please visit our website (www.toshiba.eu/recycling) or contact your local city ofce or the shop where you purchased the product.

Disposal of batteries and/or accumulators

The crossed out wheeled dust bin symboI indicates that batteries and/or accumulators must be collected and disposed of separately from household waste. If the battery or accumulator contains more than the specied values of lead (Pb), mercury (Hg), and/or cadmium (Cd) dened in the European Battery Directive, then the chemical symbols for lead (Pb), mercury (Hg) and/or cadmium (Cd) will appear below the crossed out wheeled dust bin symbol. By participating in separate collection of batteries, you will help to assure the proper disposal of products and batteries and thus help to prevent potential negative consequences for the environment and human health. For more detailed information about the coIIection and recycling programmes available in your country, please visit our website (www.toshiba.eu/recycling) or contact your local city ofce or the shop where you purchased the product.

English - 54 -

Q & A Section

Question

Answer

Why is there no sound or picture?

Why is there a picture but no sound?

Sound

Picture

General

Why does the sound come only from one speaker when stereo sound is selected?

Why is the soundtrack in English when a different audio language has been selected?

What can cause a poor picture? Interference or a weak signal. Try a different TV station

Why isn't the video / DVD being played shown on screen?

Why is the Blu-ray / DVD player in black and white?

Why are there horizontal stripes and/ or blurred images on the screen when in PC mode?

Why doesn't the remote control work?

Why doesn't the Media browser feature operate?

Why digital subtitles are not shown on screen when they are selected?

Why is the digital channel locked? Parental control is activated. Check parental settings

Why are some encrypted digital channels unavailable?

Why does the active standby LED sometimes take longer to go out?

Why don’t the controls of the TV work?

What is DVB-T? Digital Video Broadcast via an aerial / antenna

What is DVB-C? Digital Video Broadcast via a cable system

How are radio channels selected? You can select them via Channel list

What can be done if the PIN is forgotten?

Why don't the networked devices work?

Why doesn’t the recording function work?

Why “USB is too slow” message is displayed on the screen while starting a recording?

English

Check if the TV is not in standby mode Check the mains plug and all mains connections

Check if the volume has not been turned off or sound mute has not been selected

Check the balance in the SOUND menu if it has been set to one side or not

The programme is currently being broadcast with an English soundtrack only

Make sure the Blu-ray or DVD player is connected to the TV as illustrated in the beginning chapters, then select the correct input

by pressing the SOURCE - button on the remote

Check if the correct input has been chosen or not

The phase may need adjusting. Select PC settings and highlight Phase and adjust until the picture is clear

Check if the batteries are exhausted or inserted incorrectly

Make sure the USB stick / HDD is connected correctly. Incorrect operation may occur from a USB Hub connection. Check your network setup if using a media server

Subtitles are not currently being transmitted by the broadcaster

Your subscription needs upgrading. Contact your service provider

When in active standby, the TV's active standby will automatically search all available channels for updates, provided automatic update is enabled. The required time to do this may vary. Led blinks as red and green in this mode

Check if CHILD LOCK is selected or not

You can reset the TV and perform the First Time Installation again. Ensure that no one else is aware of this procedure by securely storing the Owner’s Manual If you are asked to enter a PIN to perform the First Time Installation consult your authorized retailer

Check the LAN cables if they are connected properly or not. If it is wireless connection, make sure the wireless network settings are done accordingly

Try switching off the TV and then re-inserting the USB device while the TV is switched off

Try restarting the recording. If you still get the same error, it is possible that your USB disk does not meet the speed requirements. Try connecting another USB disk

English - 55 -

English

REACH information

The European Union (EU) chemical regulation, REACH (Registration, Evaluation, Authorization and Restriction of Chemicals), entered into force on 1 June 2007, with phased deadlines to 2018.

Toshiba will meet all REACH requirements and is committed to provide our customers with information about the presence in our articles of substances included on the candidate list according to REACH regulation.

Please consult the following website www.toshiba.eu/reach for information about the presence in our articles of substances included on the candidate list according to REACH in a concentration above 0.1 % weight by weight.

Toshiba herby declares that this product with an integrated Wireless Function is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

EU Conformity Statement

This product is carrying the CE-Mark in accordance with the related European Directives.

Responsible for CE-Marking is TOSHIBA, 23 Davy Road, Plymouth, PL6 8BY UK.

This product is labeled with the CE Mark in accordance with the related European Directives, notably Low Voltage Directive 2006/95/EC, Electromagnetic Compatibility Directive 2004/108/EC and RoHS Directive 2011/65/EU. Furthermore the product complies with the Ecodesign Directive 2005/32/EC (EuP) and 2009/125/EC (ErP) and its related implementing measures.

If this product has an integrated Wireless LAN feature, the Radio Equipment and Telecommunications Terminal Equipment Directive 1999/5/EC is also applicable.

Reproduction in whole or part without written permission is strictly prohibited.

This equipment corresponds to requirements of the Technical Regulation on limitation of usage of certain

dangerous substances in electrical and electronic equipment.

English - 56 -

Toshiba T5435-48 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual