Publish Date: 2000/11/17
.
.
BSI No.: SFB0035
Subject: Changing the Service Manual
Model: DP120F, DP125F, DP80F, DP85F
Category Field Application Unit
Modification/Correction of Service
Manual
Factory Application:
To be applied immediately Operator's Manual/Service
CONTENT
1. Document No.
DP120F/125F
For TABS: 31200001
For others: 31200003
.
.
.
.
Manual
DP80F/85F
For TABS: 31200002
For others: 31200004
2. Reason for change
Add the step for the firmware updating (RAM Clear) in the Service Manual.
DP120F/125F
Refer to page 11-81.
DP80F/85F
Refer to page 11-69.
Written by K. Takanashi
Attached Files
DP80F_85F SM P11-69.pdf DP120F_125F SM P11-81.pdf
(4) Turn on the power. Updating the firmware should start.
The progressing status is shown on the LCD.
appear one by one disappear one by one
- - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - -
→
- - - - - - - -
End of updating:
All the dots repeat turning on and off
(5) Turn off the power and remove the Recovery ROM PBA. Then mount the Right side
cover.
(6) Turn on the power while pressing the [ * ] and [ # ] keys., then turn off.
March 2000 © TOSHIBA TEC 11-69 DP80F/DP85F Troubleshooting