Toshiba SD-6100KU2, SD-K980KU, SD-6100, SD-K980, SD-6100KU Owner's Manual
DVD PLAYER
SD-6100KU
SD-K980KU
DIGITAL VIDEO
2
11
16
19
29
36
Introduction
Connections
Basic playback
Advanced playback
Function setup
Others
®
© 2008 Toshiba Corporation
Owner’s Record
The model number and serial number are on the back of
your DVD Player. Record these numbers in the spaces
below. Refer to these numbers whenev er you communicate
with your Toshiba dealer about this DVD Play er.
Model number:
Serial number:
OWNER’S MANUAL
2
Introduction
SAFETY PRECAUTIONS
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN
OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT
OPEN THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.
CAUT ION : TO PREVENT ELECTRIC SHOCK, MA TCH WIDE BLADE OF PLUG T O WIDE SLOT OF AC PO WER OUTLET ,
THEN FULL Y INSERT .
WARNING: The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquid, such as
vases, shall be placed on the apparatus.
CAUTION: This Digital Video Disc Player employs a Laser System.
To ensure proper use of this product, please read this owner’s manual carefully and retain for future
reference. Should the unit require maintenance, contact an authorized service location.
Use of controls or adjustments or performance of procedures other than those specified herein may result
in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try to open the enclosure.
Visible and invisible laser radiation when open and interlocks defeated.
DO NOT STARE INTO BEAM.
FCC NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
WARNING: Changes or modifications to this unit not expressly approved by Toshiba, or parties authorized by Toshiba,
could void the user authority to operate the equipment.
The lightning flash with an arrowhead symbol, within the
equilateral triangle, is intended to alert the user to the presence
of uninsulated "dangerous voltage" within the product's
enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within the equilateral triangle is intended
to alert the user to the presence of important operating and
maintenance (servicing) instructions in this owner’s manual.
CLASS 1
LASER PRODUCT
Warnings: • The main plug is used as disconnect device and it should remain readily operable during intended used.
In order to disconnect the apparatus from the mains completely, the main plug should be disconnected
from the mains socket outlet completely.
• Minimum 10 cm (4 inches) distances around the apparatus for sufficient ventilations.
• The ventilation should not be impeded by covering the ventilation openings with items such as newspaper,
table-cloths, curtains, etc.
• No naked flame sources such as lighted candles should be placed on the apparatus.
• The use of apparatus in moderate climates.
The symbol for Class (Double lnsulation)
CAUTION:VISIBLE LASER RADIATION WHEN
OPEN. DO NOT STARE INTO BEAM.
AVIS
WARNING:TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICINGTO QUALIFIED SERVICE PERSONNEL.
3
Introduction
IMPORT ANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any of the ventilation openings. Install in accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers)
that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider
than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is
provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tr ipod, bracket, or table specified by the manufacturer, or
sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any
way, such as the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Portable Cart Warning
15. Do not overload wall outlets; extension cords, or integral convenience receptacles as this can result in a risk of fire or
electric shock.
16. Never expose the apparatus to dripping or splashing or place items such as vases, aquariums, any other item filled with
liquid, or candles on top of the unit.
17. Keep your fingers well clear of the disc tray as it is closing. Neglecting to do so may cause serious personal injury.
18. Do not place anything on top of this unit.
19. Do not place the apparatus on amplifiers or equipment that may produce heat.
20. Never block or cover the slots or openings in the unit.
Never place the unit:
• on a bed, sofa, rug or similar surface;
• too close to drapes, curtains, or walls; or
• in a confined space such as a bookcase, buit-in cabinet, or any other place with poor ventilation.
The slots and openings are provided to protect the unit from overheating and to help maintain reliable operation.
21. Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious personal injury
and apparatus malfunction.
22. If the apparatus should emit smoke or an unusual odor, immediately disconnect the power cord from the wall outlet. Wait
until the smoke or smell stops, then ask your dealer for a check and repair. Neglecting to do so may cause fire.
23. During thunderstorms, do not touch the connecting cables or the apparatus.
24. Warning: To prevent spread of fire, keep candles or other open flames away from this product at all times.
ADDITIONAL SAFETY INSTRUCTIONS
Location of the required label
The rating plate and the safety caution are
on the rear of the unit.
4
Introduction
Precautions
Notes on moisture condensation
Moisture condensation damages the DVD player. Please
read the following carefully.
Moisture condensation occurs, for example, when you pour
a cold drink into a glass on a warm day. Drops of water
form on the outside of the glass. In the same w ay , moisture
may condense on the optical pick-up lens inside this unit,
one of the most crucial internal parts of the DVD player.
Moisture condensation occurs during the following
cases.
When you bring the DVD player directly from a cold
place to a warm place.
When you use the DVD player in a room where you
just turned on the heater, or a place where the cold
wind from the air conditioner directly hits the unit.
In summer, when you use the DVD player in a hot and
humid place just after you move the unit from an air
conditioned room.
When you use the DVD player in a humid place.
Do not use the DVD play er when moisture condensation
may occur.
If you use the DVD player in such a situation, it may
damage discs and internal parts. Remove the disc,
connect the power cord of the DVD player to the wall
outlet, turn on the DVD player, and leave it for two or
three hours. After two or three hours, the DVD player
will have warmed up and evapor ated any moisture. Keep
the DVD player connected to the wall outlet and
moisture condensation will seldom occur.
Notes on handling
When shipping the DVD player, the original shipping
carton and packing materials come in handy. For
maximum protection, repack the unit as it was originally
packed at the factory. Take care not to give it a shock
or shake when carrying.
Do not use volatile liquids, such as insect spray, near
the DVD play er . Do not lea ve rubber or plastic products
in contact with the DVD play er for a long time . They will
leave marks on the finish.
The top and rear panels of the DVD pla yer may become
warm after a long period of use. This is not a
malfunction.
When the DVD player is not in use, be sure to remove
the disc and turn off the power.
If you do not use the DVD player for a long period, the
unit may not function properly in the future. Turn on
and use the DVD player occasionally.
Notes on locating
Place the DVD player on a level surface. Do not use it
on a shaky or unstable surface such as a wobbling
table or inclined stand. The loaded disc may come off
the proper position and cause damage to the DVD
player.
When you place this DVD player near a TV, radio, or
VCR, the playback picture may become poor and the
sound may be distorted. In this case, place the DVD
player away from the TV, radio, or VCR.
Notes on cleaning
Use a soft, dry cloth for cleaning.
For stubborn dirt, soak the cloth in a weak detergent
solution, wring well and wipe. Use a dry cloth to wipe it
dry.
Do not use any type of solvent, such as thinners and
benzene, as they may damage the surface of the DVD
player.
If you use a chemical saturated cloth to clean the unit,
follow that product’s instructions.
Inspection and Maintenance
This DVD player is a high technology, precision device. If
the optical pick-up lens and disc drive parts become dirty
or worn down, the picture quality may be reduced. To
avoid reduction in picture quality, it is recommended that
regular inspection and maintenance (cleaning or parts
replacement) be performed every 1,000 hours of use. For
further details, contact your nearest consumer electronics
dealer.
5
Introduction
Notes on Discs
Playback side
DVD
Title 1 Title 2
Chapter 1 Chapter 2 Chapter 1 Chapter 2 Chapter 3
Structure of disc contents
Normally, DVDs are divided into titles, and the titles are
sub-divided into chapters. VIDEO CDs and audio CDs are
divided into tracks.
DVD
VIDEO CD/audio CD
Each title, chapter or track is assigned a number, which is
called “title number”, “chapter number” or “track number”
respectively.
There may be discs that do not have these numbers.
Notes on copyright
The unauthorized recording, use, distribution, or revision
of copyrighted materials including, without limitation,
television programs, videotapes, and DVDs, is prohibited
under the Copyright Laws of the United States and other
countries, and may subject you to civil and criminal liability .
This product incorporates copyright protection technology
that is protected by method claims of certain U.S. patents
and other intellectual property rights owned by
Macrovision Corporation and other rights owners. Use of
this copyright protection technology must be authorized
by Macrovision Corporation, and is intended for home
and other limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
On handling discs
Do not touch the playback side of the disc.
Do not attach paper or tape to discs.
On cleaning discs
Fingerprints and dust on the disc cause picture and
sound deterioration. Wipe the disc from the center
outwards with a soft cloth. Always keep the disc clean.
If you cannot wipe off the dust with a soft cloth, wipe
the disc lightly with a slightly moistened soft cloth and
finish with a dry cloth.
Do not use any type of solvent such as thinner, benzine ,
commercially available cleaners or antistatic spray for
vinyl LPs. It may damage the disc.
On storing discs
Do not store discs in a place subject to direct sunlight
or near heat sources.
Do not store discs in places subject to moisture and
dust such as a bathroom or near a humidifier.
Store discs vertically in a case. Stacking or placing
objects on discs outside of their case may cause
warping.
Track 1 Track 2 Track 3 Track 4 Track 5
VIDEO CD/audio CD
6
Introduction
DIGITALVIDEO
SUPER VIDEO
• You cannot play discs other than those listed abo v e .
• You cannot pla y DVD-RAM discs or non-standardized discs ,
etc., even if they may be labeled as above.
• This DVD player uses the NTSC color system, and cannot
play DVDs recorded in any other color system (PAL, SECAM,
etc.).
Because of problems and errors that can occur during the
creation of DVD and CD software and/or the manufacture of
DVD and CD discs, T oshiba cannot assure that this D VD pla yer
will successfully play every disc bearing the D VD and CD logos.
If you happen to experience any difficulty playing a DVD and/
or CD disc on this DVD play er, please contact T oshiba Customer
Service.
is a trademark of DVD Format/Logo Licensing Corporation.
Notes on Discs (continued)
DVDs
Disc Mark
Contents
Disc
Size
Maximum
playback time
VIDEO
CDs
Approx. 4 hours
(single sided disc)
Approx. 8 hours
(double sided disc)
Approx. 80 minutes
(single sided disc)
Approx. 160 minutes
(double sided disc)
Approx. 74 minutes
Approx. 20 minutes
8 cm
12 cm
8 cm
12 cm
Audio
+
video
(moving
pictures)
Audio
+
video
(moving
pictures)
Audio
CDs
Approx. 74 minutes
Approx. 20 minutes
8 cm
(CD
single)
12 cm
Audio
The following discs are also available.
DVD±R/±R W and DVD-ROM discs of DVD format
CD-R/CD-RW discs of CD-DA, Video CD, MP3, WMA or
JPEG format
Official DivX® Certified product
Plays all versions of DivX® video (including DivX® 6) with
standard playback of DivX
®
media files
Some of these discs may be incompatible.
SUPER
VIDEO
CDs
DivX
®
35 min.
10 min.
8 cm
12 cm
Audio
+
video
(moving
pictures)
Audio
+
video
(moving
pictures)
It depends on DivX
®
quality
8 cm
12 cm
About this owner’s manual
This owner’s manual e xplains the basic instructions of this
DVD player. Some DVDs are produced in a manner that
allows specific or limited operation during playback. As
such, the DVD player may not respond to all operating
commands. This is not a defect in the DVD player. Refer
to instruction notes of discs.
“
” may appear on the TV screen during operation.
A “
” means that the operation is not permitted by the
DVD player or the disc.
Notes on region numbers
The region number of this DVD player is 1. If region
numbers, which stand for their playable area, are printed
on your DVD and you do not find
or , disc
playback will not be allowed by the player. (In this case,
the DVD player will display a message on-screen).
On VIDEO CDs
This DVD player supports VIDEO CDs equipped with the
PBC (Version 2.0) function. (PBC is the abbreviation of
Playback Control.) Y ou can enjoy two playback variations
depending on types of discs.
• VIDEO CD not equipped with PBC function (Version 1.1)
Sound and movie can be played on this DVD player in
the same way as an audio CD.
• VIDEO CD equipped with PBC function (Version 2.0)
In addition to operation of a VIDEO CD not equipped
with the PBC function, you can enjoy playback of
interactive software with search function by using the
menu displayed on the TV screen (Menu Playback).
Some of the functions described in this owner’s manual
may not work with some discs.
Playable discs
This DVD player can play the following discs.
7
Introduction
Table of Contents
Introduction
SAFETY PRECAUTIONS........................... 2
IMPORTANT SAFETY INSTRUCTIONS .... 3
Precautions ............................................... 4
Notes on Discs .......................................... 5
Notes on region numbers ................................... 6
Table of Contents...................................... 7
Identification of Controls ......................... 8
Front panel .......................................................... 8
Rear panel .......................................................... 8
DVD display ........................................................ 8
Remote control.................................................... 9
Loading batteries ............................................... 10
Operating with the remote control ...................... 10
Connections
Connecting to a TV .................................. 11
Connecting to a TV............................................. 11
Connecting to a TV (Using the component video
jacks)................................................................. 11
Connecting to a display (Using a HDMITM cable).........
12
Connecting to Optional Equipment ....... 13
Connecting to an amplifier equipped with a
Dolby
®
Digital decoder ......................................... 14
Connecting to an amplifier equipped with
Dolby Surround Pro Logic .............................. 14
Connecting to an amplifier equipped with a
DTS
®
decoder.................................................. 15
Connecting to an amplifier equipped with an MPEG2
audio decoder .................................................. 15
Connecting to an amplifier equipped with a
digital audio input ........................................... 15
Basic playback
Playing a Disc.......................................... 16
Basic playback ................................................ 16
Variable Speed Playback......................... 17
Playing in fast reverse or fast forward
directi on s ...................................................... 17
Playing frame by frame ................................... 17
Playing in slow-motion .................................... 17
Resuming playback from the same location .. 17
Locating a Desired Section ..................... 18
Locating a title using the top menu.................. 18
Locating a specific chapter or track ................ 18
Advanced playback
Accessing a Specific Location Directly ...........
19
Locating a specific title/chapter/time ................... 19
Repeating a Specific Segment................. 20
Repeating a specific segment ............................ 20
Playing in a Varied Order......................... 20
Playing titles, chapters or tracks in a varied
order .................................................................. 20
Playing in a Favorite Order ...................... 21
Setting titles, chapters or tracks in a favorite
order .................................................................. 21
Zooming a Picture..................................... 22
Zooming a picture ............................................. 22
Selecting the Sound Enhancement
(E.A.M.) ...................................................... 22
Selecting the sound enhancement ................... 22
Selecting the Picture Enhancement
(E.P.M.) ....................................................... 23
Selecting the picture enhancement .................. 2 3
Selecting Subtitles .................................... 23
Selecting a subtitle language ........................... 23
Selecting the Camera Angle...................... 24
Changing the camera angle ............................. 2 4
Selecting a Language................................ 24
Selecting a playback audio setting ................... 24
On-screen Display Operation .................... 25
On-screen display operation ............................ 25
Playing MP3/WMA Files ........................... 26
Playing MP3/WMA files ...................................... 26
Viewing JPEG Files .................................. 27
Viewing JPEG files ............................................ 27
Viewing a thumbnail view ................................... 27
Playing DivX®/MPEG-4 Files .................... 28
Playing DivX®/MPEG-4 files............................... 28
Function setup
Customizing the Function Settings ........ 29
Setting procedure ............................................... 29
Setting details..................................................... 29
Tab le of Languages................................... 35
Others
Before Calling Service Personnel ........... 36
Specifications ........................................... 37
Limited Warranty ...................................... 38
8
Introduction
Identification of Controls
See the page in for details.
16
16
16
10
16
8
12
HDMI indicator
16
HDMI SELECT
12
Front panel
12
HDMI OUT
jack
11
11
11
11
14
S-VIDEO
S-VIDEO OUT
jack
15
Power Cord
Rear panel
Chapter/T rack number Indicator
The indicators vary depending on the kinds of discs you
play.
Multifunctional indicator (indicates
operating status or messages, etc.)
Bad disc
• During playback:
Example
• During playback:
Example
• During playback:
Example
Some discs may only
display chapter numbers.
Some discs may only
display track numbers.
Some discs may only
display track numbers.
LOAD/CLOSE
No disc
OPENAudio CDVIDEO CDDVD VIDEO
DVD display
9
Introduction
* MENU button
Use the MENU button to display the menu included on
many DVDs. To operate a menu, follow the instructions
in “Locating a title using the top menu.”
18
* RETURN button
Return to menu display for VCD (2.0) discs with menu.
16
HDMI button
19
22
23
24
17
18
17
18
18
20
19
21
29
12
16
19
17
23
24
16
16
18
17
18
25
16
25
16
16
20
22
12
Remote control
The instructions in this manual describe the functions on the remote control. See the page in for details.
10
Introduction
Open the cover .
Insert batteries (R03/AAA size).
Make sure to match the + and – on the batteries
to the marks inside the battery compartment.
Caution
• Never throw batteries into a fire.
Notes
• Be sure to use R03/AAA size batteries.
• Dispose of batteries in a designated disposal area.
• Attention should be drawn to the environmental aspects of
battery disposal.
• Do not mix different battery types or combine used batteries
with new ones.
• If the remote control does not operate correctly, or if the
operating range becomes reduced, replace both batteries
with new ones.
• If the batteries are dead or if you will not be using the remote
control for a long time, remove the batteries to prevent
battery acid from leaking into the battery compartment.
Operating with the remote control
Point the remote control at the remote
sensor and press the buttons.
Distance: About 7 m (23 feet) from the front of the remote
sensor
Angle: About 30° in each direction of the front of
the remote sensor
* Do not expose the remote sensor of the D VD pla yer
to a strong light source such as direct sunlight or
other illumination. If you do so, you may not be able
to operate the DVD player via the remote control.
Notes on the remote control
• Direct the remote control at the remote sensor of the DVD
player.
• When using the remote control, press the buttons at intervals
of about 1 second to ensure the correct mode of operation.
• Do not drop or give the remote control a shock.
• Do not leave the remote control near an extremely hot or
humid place.
• Do not spill water or put anything wet on the remote control.
• Do not open the remote control.
• If the remote control is not going to be used for a long
time, remove the battery to avoid damage caused by
battery leakage corrosion.
2
Loading batteries
1
CAUTIONS:
• Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
• Batteries shall not be exposed to excessive heat such as
sunshine, fire or the like.
• Do not dispose of battery in fire; battery may explode or leak.
• When discarding batteries, environmental problems must be
considered and local rules or laws governing the disposal of
these batteries must be strictly followed.
Identification of Controls (continued)
11
Connections
Connections
Connecting to a TV
Connect the DVD player to y our TV.
Notes
• Refer to the owner’s manual of the connected TV as well.
• When you connect the DVD player to your TV, be sure to turn off the power and unplug both units from the wall outlet before making any
connections.
• If your television set has one audio input, connect the left and right audio outputs of the DVD player to a Y cable adapter (not supplied) and
then connect to your TV .
• Connect the DVD player directly to your TV . If you connect the DVD player to a VCR, TV/VCR combination or video selector , the playback
picture may be distorted as DVDs are copy protected.
• Analog audio out will not have sound if DTS playback is selected.
Audio/Video cables (supplied)
S-Video cable (not supplied)
To 2ch AUDIO OUT
(R: red, L: white)
ToVIDEO
OUT
(yellow)
Normal TV
To video
input
(yellow)
To audio
input
If the TV has a S-video input, connect the DVD pla yer
with an S-video cable. When using an S-video cab le,
do not connect the yellow video cable and component
video cables (Y/P
B/PR).
Connecting to a TV
Connecting to a TV (Using the component video jacks)
Audio cable
To audio input
ToY video
input
ToP
B
video
input
To PRvideo
input
To2ch AUDIO OUT
(R:red, L:white)
Connections
• Make the following setting.
On-screen display
Select:
Page
“Off”,
“PCM” or
“Raw”
“Digital Output”
“Video Output”
S-VIDEO
Component
P-Scan
HDMI
31
32
Interlaced outputs (ColorStream®)
Some TVs or monitors are equipped with component video inputs.
Connecting to these inputs allows you to enjoy higher quality
picture playback.
Actual labels for component video inputs may vary depending on
the TV manufacturer. (ex. Y, R-Y, B-Y or Y, CB, CB)
In some TVs or monitors, the color levels of the playback picture
may be reduced slightly or the tint may change. In such a case,
adjust the TV or monitor for optimum performance.
Progressive outputs (ColorStream Pro®)
Some TVs or monitors are equipped with component video inputs
that are capable of reproducing a progressively scanned video
signal. Connecting to these inputs allows you to view the highest
quality pictures with less flicker.
Consumers should note that not all high definition television sets
are fully compatible with this product and may cause artifacts to
be displayed in the picture. In case of 480 progressive scan picture
problems, it is recommended that the user switch the connection to
the “standard definition” output. If there are questions regarding our
TV set compatibility with this model 480p DVD play er, please contact
our Customer Service Center.
12
Connections
About HDMI
HDMI (High Definition Multimedia Interface) supports both video
and audio on a single digital connection for use with DVD pla yers,
DTV, set-top bo xe s, and other A V devices. HDMI was developed
to provide the technologies of High Bandwidth Digital Content
Protection (HDCP) as well as Digital Visual Interface (DVI) in
one specification. HDCP is used to protect digital content
transmitted and received by DVI-compliant or HDMI-compliant
displays.
HDMI has the capability to support standard, enhanced, or highdefinition video plus standard to multi-channel surround-sound
audio. HDMI features included uncompressed digital video, a
bandwidth of up to 2.2 gigabytes per second (with HDTV) signals),
one connector (instead of several cables and connectors), and
communication between the AV source and AV devices such as
DTVs.
HDMI, the HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI licensing LLC.
Switching the output signal (interlaced / progressive)
using the remote control
Y ou can temporarily switch the output signal for better picture quality .
Press PROGRESSIVE button repeatedly on the remote control to
select Video Output to P-Scan mode during stop.
If your TV does not support the progressive scan format, the picture
will appear scrambled or blank. To return to normal picture, press
PROGRESSIVE button repeatedly to select the Component mode.
• Make the following setting.
On-screen display
Select:
Page
Notes
• Refer to the owner’s manual of the connected equipment as well.
• When you connect the DVD player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet
before making any connections.
• If you place the DVD player near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the D VD player a way from
the tuner and radio.
• The output sound of the DVD player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level.
Otherwise, high volume sound may damage your hearing as well as the speakers.
• Turn off the amplifier before you connect or disconnect the D VD pla yer’ s power cord. If you leav e the amplifier power on, the speakers ma y
be damaged.
• Analog audio out will not have sound if DTS playback is selected.
• ColorStream
®
and ColorStream Pro® are registered trademarks of T oshiba America Cousumer Products L.L.C.
“PCM” or
“Raw”
“Digital Output”
Component
*P-Scan
(Progressive)
“Video Output”
* Only for TV equipped with component video
input jacks which support the progressive scan.
31
32
480p, 720p, 1080i and 1080p are signals created with this
DVD Player from original 480i signal. The resolution of the
picture may not be increased even if they are selected.
HDMI indicator Video output signal
illuminates “ • 1080i”
1080i (interlaced)
illuminates “ • 720p” 720p (progressive)
illuminates “ • 480p”
480p (progressive)
Press
Press
Press
• Make the following setting.
On-screen display
Select:
Page
“PCM”
“Digital Output”
HDMI
“Video Output”
HDMI-compatible
display
HDMI Cable
To HDMI
Output
Available output signals are below:
• Auto
• 480p (progressive)
• 720p (progressive)
• 1080i (interlaced)
• 1080p (progressive)
Switching the video quality (HDMI mode) using HDMI
button on the remote control or HDMI SELECT button
on the front panel.
Press HDMI button on the remote control or HDMI SELECT button
on the front panel to receive a suitable video quality in STOP mode.
The video quality is required to match your TV having HDMI f eature
and suitable quality. Please also check your TV owner’s manual.
Press this button to change the output signals as below. See the
HDMI indicator and select the appropriate output signal.
illuminates “ • 1080p”
1080p (progressive)
31
32
Connecting to a display (Using a HDMITM cable)
Press
illuminates “ • 480p, • 720p,
• 1080i and • 1080p”
Auto
Press
Loading...