Toshiba Satellite E40-A, /Satellite Pro E40-A User Manual

Download

Satellite®/Satellite Pro® E40-A Series

User’s Guide

If you need assistance: Technical support is available online at Toshiba’s Web site at

support.toshiba.com. At this Web site, you will find answers

for many commonly asked technical questions plus many downloadable software drivers, BIOS updates, and other downloads.

For more information, see “If Something Goes Wrong” on

page 111 in this guide.

GMAD00363010 07/13

Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling.

For the state of California only.

Model: Satellite®/Satellite Pro® E40-A Series

Recordable and/or ReWritable Drive(s) and Associated Software Warranty

The computer system you purchased may include Recordable and/ or ReWritable optical disc drive(s) and associated software, among the most advanced data storage technologies available. As with any new technology, you must read and follow all set-up and usage instructions in the applicable user guides and/or manuals enclosed or provided electronically. If you fail to do so, this product may not function properly and you may lose data or suffer other damage.

TOSHIBA AMERICA INFORMATION SYSTEMS, INC. (“TOSHIBA”), ITS AFFILIATES AND SUPPLIERS DO NOT WARRANT THAT OPERATION OF THE PRODUCT WILL BE UNINTERRUPTED OR ERROR FREE. YOU AGREE THAT TOSHIBA, ITS AFFILIATES AND SUPPLIERS SHALL HAVE NO RESPONSIBILITY FOR DAMAGE TO OR LOSS OF ANY BUSINESS, PROFITS, PROGRAMS, DATA, NETWORK SYSTEMS OR REMOVABLE STORAGE MEDIA ARISING OUT OF OR RESULTING FROM THE USE OF THE PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY THEREOF.

Protection of Stored Data

For your important data, please make periodic back-up copies of all the data stored on the hard disk or other storage devices as a precaution against possible failures, alteration, or loss of the data.

IF YOUR DATA IS ALTERED OR LOST DUE TO ANY TROUBLE, FAILURE OR MALFUNCTION OF THE HARD DISK DRIVE OR OTHER STORAGE DEVICES AND THE DATA CANNOT BE RECOVERED, TOSHIBA SHALL NOT BE LIABLE FOR ANY DAMAGE OR LOSS OF DATA, OR ANY OTHER DAMAGE RESULTING THEREFROM. WHEN COPYING OR TRANSFERRING YOUR DATA, PLEASE BE SURE TO CONFIRM WHETHER THE DATA HAS BEEN SUCCESSFULLY COPIED OR TRANSFERRED. TOSHIBA DISCLAIMS ANY LIABILITY FOR THE FAILURE TO COPY OR TRANSFER THE DATA CORRECTLY.

Critical Applications

The computer you have purchased is not designed for any “critical applications.” “Critical applications” means life support systems, medical applications, connections to implanted medical devices, commercial transportation, nuclear facilities or systems or any other applications where product failure could lead to injury to persons or loss of life or catastrophic property damage.

TOSHIBA, ITS AFFILIATES AND SUPPLIERS DISCLAIM ANY AND ALL LIABILITY ARISING OUT OF THE USE OF THE COMPUTER PRODUCTS IN ANY CRITICAL APPLICATIONS. IF YOU USE THE COMPUTER PRODUCTS IN A CRITICAL APPLICATION, YOU, AND NOT TOSHIBA, ASSUME FULL RESPONSIBILITY FOR SUCH USE.

ACCORDINGLY,

FCC Notice “Declaration of Conformity Information”

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

❖ Reorient or relocate the receiving antenna. ❖ Increase the separation between the equipment and receiver. ❖ Connect the equipment to an outlet on a circuit different from

that to which the receiver is connected.

❖ Consult the dealer or an experienced radio/TV technician for

help.

NOTE

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

Only Peripherals complying with the FCC Class B limits may be attached to this equipment. Operation with noncompliant peripherals or peripherals not recommended by Toshiba is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and the computer's ports. Changes or modifications made to this equipment not expressly approved by Toshiba or parties authorized by Toshiba could void the user's authority to operate the equipment.

❖ This device may not cause harmful interference. ❖ This device must accept any interference received, including

interference that may cause undesired operation.

Contact Toshiba’s Support Web site at support.toshiba.com.

Bluetooth® Wireless Technology

Interoperability

Bluetooth

with any product with Frequency Hopping Spread Spectrum (FHSS) radio technology, and is compliant to:

❖

❖ Logo certification with

Cards from TOSHIBA are designed to be interoperable

Bluetooth Bluetooth

defined by The

Specification as defined and approved by The Special Interest Group.

Bluetooth

wireless technology that is based on

Bluetooth

wireless technology as

Special Interest Group.

Bluetooth

more (up to a total of seven) TOSHIBA portable devices. Please contact TOSHIBA computer product support on Web site http://www.toshiba-europe.com/computers/tnt/ bluetooth.htm in Europe or support.toshiba.com in the United States for more information.

When you use a LAN devices, cause errors. If you detect certain interference while you use a

Bluetooth

device to the area outside of the interference range of 2.4 GHz Wireless LAN devices (40 meters/43.74 yards or more) or stop transmitting from your device. Please contact TOSHIBA computer product support on Web site http:// www.toshiba-europe.com/computers/tnt/bluetooth.htm in Europe or support.toshiba.com in the United States for more information.

Bluetooth

same radio frequency range and may interfere with one another. If you use simultaneously, you may occasionally experience a less than optimal network performance or even lose your network connection. If you should experience any such problem, immediately turn off either one of your LAN. Please contact Toshiba computer product support on Web site http://www.toshiba-europe.com/computers/tnt/ bluetooth.htm in Europe or support.toshiba.com in the United States for more information.

modules enable wireless networks over two or

Bluetooth

device, always change the frequency, move your

and Wireless LAN devices operate within the

module close to 2.4 GHz Wireless

transmissions might slow down or

Bluetooth

and Wireless LAN devices

Bluetooth

or Wireless

Bluetooth® Wireless Technology and Your

Health

The products with devices, emit radio frequency electromagnetic energy. The level of energy emitted by devices with however is much less than the electromagnetic energy emitted by wireless devices such as mobile phones.

Because products with the guidelines found in radio frequency safety standards and recommendations, TOSHIBA believes is safe for use by consumers. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature.

In some situations or environments, the use of technology may be restricted by the proprietor of the building or responsible representatives of the organization. These situations may for example include:

Bluetooth

❖ Using the equipment with

board airplanes, or

❖ In any other environment where the risk of interference to other

devices or services is perceived or identified as harmful.

If you are uncertain of the policy that applies on the use of wireless devices in a specific organization or environment (e.g. airports), you are encouraged to ask for authorization to use the device with

Bluetooth

wireless technology prior to turning on the equipment.

wireless technology, like other radio

Bluetooth

wireless technology operate within

wireless technology

Bluetooth

wireless technology

Bluetooth

wireless technology on

wireless

Exposure to Radio Frequency Radiation The radiated output power of the

TOSHIBA is far below the FCC radio frequency exposure limits. Nevertheless, the be used in such a manner that the potential for human contact during normal operation is minimized.

Bluetooth

Card from TOSHIBA shall

Card from

Wireless Interoperability

Wireless LAN products are designed to be interoperable with any wireless LAN product that is based on Direct Sequence Spread Spectrum (DSSS) radio technology, and is compliant to:

❖ The IEEE 802.11 Standard on Wireless LANs (Revision A/B/G),

as defined and approved by the Institute of Electrical and Electronics Engineers.

❖ The Wireless Fidelity (Wi-Fi

Alliance. The “Wi-Fi CERTIFIED” logo is a certification mark of the Wi-Fi Alliance.

) certification as defined by the Wi-Fi

NOTE

Bluetooth

same radio frequency range and may interfere with one another. If you use simultaneously, you may occasionally experience a less than optimal network performance or even lose your network connection.

If you should experience any such problem, immediately turn off your

Please contact Toshiba computer product support on Web site http://www.toshiba-europe.com/computers/tnt/ bluetooth.htm in Europe or support.toshiba.com in the United States for more information.

Radio Frequency Interference Requirements This device is restricted to indoor use due to its operation in

the 5.15 GHz to 5.25 GHz frequency range. FCC requires this product to be used indoors for frequency range 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co-channel Mobile Satellite systems.

Please note that high-power radars are allocated as primary users of the 5.25 GHz to 5.35 GHz and 5.65 GHz to 5.85 GHz bands. These radar stations can cause interference with and/or damage this device.

The above caution applies to products that operate with an

802.11a radio device.

and Wireless LAN devices operate within the

Bluetooth

or Wireless LAN device.

and Wireless LAN devices

Wireless LAN and Your Health

Wireless LAN products, like other radio devices, emit radio frequency electromagnetic energy. The level of energy emitted by Wireless LAN devices however is far much less than the electromagnetic energy emitted by wireless devices like for example mobile phones.

Because Wireless LAN products operate within the guidelines found in radio frequency safety standards and recommendations, TOSHIBA believes Wireless LAN is safe for use by consumers. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature.

In some situations or environments, the use of Wireless LAN may be restricted by the proprietor of the building or responsible representatives of the organization. These situations may for example include:

❖ Using the Wireless LAN equipment on board airplanes, or ❖ In any other environment where the risk of interference to other

devices or services is perceived or identified as harmful.

Exposure to Radio Frequency Radiation The radiated output power of Wireless LAN is far below the

FCC radio frequency exposure limits. Nevertheless, Wireless LAN shall be used in such a manner that the potential for human contact during normal operation is minimized. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Canada – Industry Canada (IC)

This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conformé à la norme

NMB-003 du Canada. This device complies with RSS 210 of Industry Canada.

The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF field in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada’s Web site www.hc-sc.gc.ca/rpb. The RF device shall not be co-located with any other transmitter that has not been tested with this device.

Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device.

L’ utilisation de ce dispositif est soumis aux deux conditions suivantes: (1) il ne doit pas produire de brouillage et (2) l’utilisateur du dispositif doit être prêt à accepter tout brouillage radioélectrique reçu, même s’il est susceptible de compromettre son fonctionnement.

The term “IC” before the equipment certification number only signifies that the Industry Canada technical specifications were met.

To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing.

Pour empecher que cet appareil cause du brouillage au service faisant l’objet d’une licence, il doit etre utilize a l’interieur et devrait etre place loin des fenetres afin de Fournier un ecram de blindage maximal. Si le matriel (ou son antenne d’emission) est installe a l’exterieur, il doit faire l’objet d’une licence.

This device is restricted to indoor use due to its operation in the 5.15 GHz to 5.25 GHz frequency range. Industry Canada requires this product to be used indoors for frequency range

5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co-channel Mobile Satellite systems.

Les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux.

Veuillez noter que les utilisateurs de radars de haute puissance sont désignés utilisateurs principaux (c.-à-d., qu’ils ont la priorité) pour les bandes 5250-5350 MHz et 5650-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL.

NOTE

The above caution applies to products that operate with an

802.11a radio device.

Regulatory statements

This product complies with any mandatory product specification in any country/region where the product is sold. In addition, the product complies with the following:

EU Declaration of Conformity

TOSHIBA declares that this product conforms to the following Standards:

Supplementary Information:

This product is carrying the CE-Mark in accordance with the related European Directives. The party responsible for CE-Marking is TOSHIBA Europe GmbH, Hammfelddamm 8, 41460 Neuss, Germany.

*The product complies with the requirements of the Low Voltage Directive 73/23/EEC, the EMC Directive 89/336/EEC and/or the R&TTE Directive 1999/5/EC.

Pb, Hg, Cd

The European Union WEEE (Waste from Electrical and Electronic Equipment) Directive Information

The European Union WEEE (Waste from Electrical and Electronic Equipment) Directive is intended to protect the quality of the environment and human health through the responsible use of natural resources and the adoption of waste management strategies that focus on recycling and reuse. This Directive requires producers of electrical and electronic products put on the market in European Union (EU) member countries after August 2005 to mark such products with a crossed-out wheeled bin with a black bar symbol. If the product’s battery or accumulator contains more than the specified values of lead (Pb), mercury (Hg), and/or cadmium (Cd) defined in the Battery Directive (2006/66/EC), then the chemical symbols for lead (Pb), mercury (Hg) and/or cadmium (Cd) will appear below the crossed out wheeled bin symbol on the battery.

In the European Union, these symbols indicate that when the last end user wishes to discard this product, it must be sent to appropriate facilities for recovery and recycling. This Directive applies to EU member countries only and does not apply to end users in other countries such as the United States.

Although the initial emphasis is in Europe, Toshiba is already working with design engineers, suppliers, and other partners to determine appropriate worldwide product life cycle planning and end-of-life strategies for our products. Please contact your local government for applicable laws and regulations governing the disposal of this product. For information on how to trade-in or recycle your product, visit www.reuse.toshiba.com.

Europe - Restrictions for use of 2.4 GHz Frequencies in European Community Countries

België/ Belgique:

Deutschland: License required for outdoor installations. Check with reseller

France: Restricted frequency band: only channels 1 to 7 (2400 MHz

Italia: License required for indoor use. Use with outdoor installations

Nederland: License required for outdoor installations. Check with reseller

For private usage outside buildings across public grounds over less than 300m no special registration with IBPT/BIPT is required. Registration to IBPT/BIPT is required for private usage outside buildings across public grounds over more than 300m. For registration and license please contact IBPT/BIPT.

Voor privé-gebruik buiten gebouw over publieke groud over afstand kleiner dan 300m geen registratie bij BIPT/IBPT nodig; voor gebruik over afstand groter dan 300m is wel registratie bij BIPT/IBPT nodig. Voor registratie of licentie kunt u contact opnemen met BIPT.

Dans le cas d’une utilisation privée, à l’extérieur d’un bâtiment, au-dessus d’un espace public, aucun enregistrement n’est nécessaire pour une distance de moins de 300m. Pour une distance supérieure à 300m un enregistrement auprès de l’IBPT est requise. Pour les enregistrements et licences, veuillez contacter l’IBPT.

for procedure to follow. Anmeldung im Outdoor-Bereich notwendig, aber nicht

genehmigungspflichtig. Bitte mit Händler die Vorgehensweise abstimmen.

and 2454 MHz respectively) may be used outdoors in France. Please contact A.R.T. (http://www.art-telecom.fr) for applicable procedures to follow.

Bande de fréquence restreinte: seuls les canaux 1- 7 (2400 et 2454 MHz respectivement) doivent être utilisés endroits extérieur en France. Vous pouvez contacter l’Autorité de Régulation des Télécommunications (http://www.arttelecom.fr) pour la procédure à suivre.

not allowed. È necessaria la concessione ministeriale anche per l’uso

interno. Verificare con i rivenditori la procedura da seguire.

for procedure to follow. Licentie verplicht voor gebruik met buitenantennes. Neem

contact op met verkoper voor juiste procedure.

Europe - Restrictions for Use of 5 GHz Frequencies in European Community Countries

European Community Countries

Austria O x x Belgium, France,

Switzerland/ Liechtenstein

Denmark, Finland, Germany, Greece, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Sweden, UK

Iceland, Spain O O O

O: allowed x: forbidden

5150-5250 MHz

Channels: 36, 40, 44, 48

Indoor Only

OOx

OOO

5250-5350 MHz

Channels: 52, 56, 60, 64

Indoor Only

❖ To remain in conformance with European spectrum usage laws

for Wireless LAN operation, the above 2.4 GHz and 5 GHz channel limitations apply. The user should use the wireless LAN utility to check the current channel of operation. If operation is occurring outside of the allowable frequencies as listed above, the user must cease operating the Wireless LAN at that location and consult the local technical support staff responsible for the wireless network.

❖ The 5 GHz Turbo mode feature is not allowed for operation in

any European Community country.

❖ This device must not be operated in ad-hoc mode using

channels in the 5 GHz bands in the European Community. Ad-hoc mode provides a direct communication between two client devices without a Wireless LAN Access Point.

❖ This device must be used with Access Points that have

employed and activated a radar detection feature required for European Community operation in the 5 GHz bands. This device will operate under the control of the Access Point in order to avoid operating on a channel occupied by any radar system in the area. The presence of nearby radar operation may result in temporary interruption of operation of this device.

5470-5725 MHz Channels: 100, 104,

108, 112, 116, 120, 124, 128, 132, 136, 140

Indoor/Outdoor

The Access Point’s radar detection feature will automatically restart operation on a channel free of radar. You may consult with the local technical support staff responsible for the wireless network to ensure the Access Point device(s) are properly configured for European Community operation.

Taiwan

Article 14 Unless approved, for any model accredited low power radio

frequency electric machinery, any company, trader or user shall not change the frequency, increase the power or change the features and functions of the original design.

Article 17 Any use of low power radio frequency electric machinery shall

not affect aviation safety and interfere with legal communications. In the event interference is caused, the use of such electric machinery shall be immediately discontinued. Operation of such products can be resumed only when they are modified and can no longer cause interference.

The legal communications mentioned in the above item refer to radio communications operated in accordance with telecommunication laws and regulations.

Low power radio frequency electric machinery shall resist against interference from legal communications or from industrial, scientific and medical radio emission electric machinery.

Using this Equipment in Japan

In Japan, the frequency bandwidth of 2,400 MHz to 2,483.5 MHz for second generation low-power data communication systems such as this equipment overlaps that of mobile object identification systems (premises radio station and specified low-power radio station).

1. Sticker Please put the following sticker on devices incorporating this

product.

The frequency bandwidth of this equipment may operate within the same range as industrial devices, scientific devices, medical devices, microwave ovens, licensed radio stations and non-licensed specified low-power radio stations for mobile object identification systems (RFID) used in factory product lines (Other Radio Stations).

1. Before using this equipment, ensure that it does not interfere with any of the equipment listed above.

2. If this equipment causes RF interference to other radio stations, promptly change the frequency being used, change the location of use, or turn off the source of emissions.

3. Contact TOSHIBA Direct PC if you have problems with interference caused by this product to Other Radio Stations.

2.4DSOF4

(1) (2)

(3)

2.4FH1

(3)

2. Indication The indication shown below appears on this equipment.

(4)

1 2.4: This equipment uses a frequency of 2.4 GHz. 2 DS: This equipment uses DS-SS modulation.

OF: This equipment uses OFDM modulation.

3 The interference range of this equipment is less than 40m. 4 This equipment uses a frequency bandwidth from

2,400 MHz to 2,483.5 MHz.

It is possible to avoid the band of mobile object identification

systems. The indication shown below appears on this equipment.

(1) (2)

(4)

1 2.4: This equipment uses a frequency of 2.4 GHz. 2 FH: This equipment uses FH-SS modulation. 3 The interference range of this equipment is less than 10m. 4 This equipment uses a frequency bandwidth from 2,400 MHz to

2,483.5 MHz.

3. TOSHIBA Direct PC Monday – Friday: 10:00 – 17:00 Toll Free Tel: 0120-15-1048 Direct Dial: 03-3457-4850 Fax: 03-3457-4868

VCCI Class B Information

Device Authorization

This device obtains the Technical Regulation Conformity Certification and the Technical Conditions Compliance Approval, and it belongs to the device class of radio equipment of low-power data communication system radio station stipulated in the Radio Law and the Telecommunications Business Law of Japan.

This guide is copyrighted by Toshiba America Information Systems, Inc. with all rights reserved. Under the copyright laws, this guide cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed, however, with respect to the use of the information contained herein.

Export Administration Regulation

This document contains technical data that may be controlled under the U.S. Export Administration Regulations, and may be subject to the approval of the U.S. Department of Commerce prior to export. Any export, directly or indirectly, in contravention of the U.S. Export Administration Regulations is prohibited.

Notice

The information contained in this manual, including but not limited to any product specifications, is subject to change without notice.

TOSHIBA CORPORATION AND TOSHIBA AMERICA INFORMATION SYSTEMS, INC. (TOSHIBA) PROVIDES NO WARRANTY WITH REGARD TO THIS MANUAL OR ANY OTHER INFORMATION CONTAINED HEREIN AND HEREBY EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE WITH REGARD TO ANY OF THE FOREGOING. TOSHIBA ASSUMES NO LIABILITY FOR ANY DAMAGES INCURRED DIRECTLY OR INDIRECTLY FROM ANY TECHNICAL OR TYPOGRAPHICAL ERRORS OR OMISSIONS CONTAINED HEREIN OR FOR DISCREPANCIES BETWEEN THE PRODUCT AND THE MANUAL. IN NO EVENT SHALL TOSHIBA BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, SPECIAL, OR EXEMPLARY DAMAGES, WHETHER BASED ON TORT, CONTRACT OR OTHERWISE, ARISING OUT OF OR IN CONNECTION WITH THIS MANUAL OR ANY OTHER INFORMATION CONTAINED HEREIN OR THE USE THEREOF.

Trademarks

Satellite, Satellite Pro, and eco Utility are either registered trademarks or trademarks of Toshiba America Information Systems, Inc. and/or Toshiba Corporation.

Adobe and Photoshop are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries.

Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Toshiba is under license. Other trademarks and trade names are those of their respective owners.

U.S. patents apply to this product. See http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are registered trademarks and DTS Premium Voice Pro is a trademark of DTS, Inc. ©DTS, Inc. All Rights Reserved.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

Intel, Intel Core, Celeron, Centrino and Pentium are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries.

Microsoft, Outlook, Windows, and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

MultiMediaCard and MMC are registered trademarks of MultiMediaCard Association.

Secure Digital and SD are trademarks of SD Card Association. Wi-Fi is a registered trademark of the Wi-Fi Alliance. All other brand and product names are trademarks or registered

trademarks of their respective companies.

Licenses

This Product is licensed under the AVC, the VC-1 and the MPEG-4 Part 2 Visual patent portfolio licenses for the personal and noncommercial use of a consumer to (i) encode video in compliance with the above standards (“Video Standards”) and/or (ii) decode AVC, VC-1 and MPEG-4 Part 2 Visual that was encoded by a consumer engaged in personal and non-commercial activity or was obtained from a video provider licensed to provide such video. None of the licenses extend to any other product regardless of whether such product is included with this product in a single article. No license is granted or shall be implied for any other use. Additional information may be obtained from MPEG LA, LLC. See www.mpegla.com.

Computer Recycling Information

As part of a commitment to people and the future, Toshiba promotes the efficient use of resources by working to achieve our zero-wasteto-landfill goal at all our production sites. In addition to our existing waste reduction and recycling policies, Toshiba is strongly committed to reducing electronic waste. In order to ensure efficient use of resources and appropriate treatment of hazardous substances, in accordance with recycling regulations in each state, country, and territory, Toshiba wants to make it easy for customers to recycle products at the end of the life cycle. To learn more about Toshiba's sustainability commitment, visit us.toshiba.com/green.

Reuse, Donation, Recycling

Functional computers can be donated to a local charity or resold easily through a Toshiba-branded program.

Non working Toshiba computers can be mailed-back for free recycling.

For additional details, please visit us.toshiba.com/recycle.

Chapter 1: Introduction...........................................24

This guide ............................................................ 26

Safety icons ......................................................... 27

Other icons used............................................ 27

Your computer’s features and

specifications ........................................... 28

Documentation .................................................... 28

Service options .................................................... 28

Chapter 2: Getting Started......................................29

Selecting a place to work .................................... 29

Setting up a work environment...................... 29

Keeping yourself comfortable........................ 30

Computer user comfort recommendations.... 30

Good Working Posture .................................. 30

Using the notebook with an external

keyboard, mouse or monitor.................... 31

Typing style.................................................... 32

Taking breaks and varying tasks ................... 33

Mobile computing tips ................................... 33

Transporting the notebook ............................ 33

Seeking additional help.................................. 34

Contents

Check list ....................................................... 34

Precautions .................................................... 35

Important information on your computer’s

cooling fan................................................ 37

Setting up your computer.................................... 37

Connecting to a power source ............................ 38

Charging the main battery ................................... 40

Using the computer for the first time................... 41

Initial setup..................................................... 41

Setting up your software................................ 42

Registering your computer with Toshiba............. 42

To Shut down your computer .............................. 43

To Restart your computer.................................... 43

To place your computer in Sleep mode............... 44

Adding optional external devices......................... 45

Adding memory (optional).................................... 45

Recovering the Internal Storage Drive................. 46

Creating recovery media................................ 47

Restoring from recovery media...................... 49

Refresh your PC (with user’s data) ................ 51

Reset your PC................................................ 53

Installing drivers and applications.................. 56

Using the touch pad ............................................ 57

Adjusting touch pad settings ......................... 59

Disabling or enabling the touch pad.............. 60

Connecting an external device ...................... 60

Using external display devices ............................ 61

Selecting video cables................................... 61

Connecting an HDMI™-compatible

television or display device ...................... 61

Connecting an external monitor or

projector................................................... 62

Directing the display output when you

turn on the computer ............................... 62

Adjusting the quality of the external

display...................................................... 63

Customizing your computer’s settings................ 64

Caring for your computer..................................... 64

Contents

Cleaning the computer................................... 64

Moving the computer..................................... 65

Chapter 3: Learning the Basics ..............................66

Computing tips .................................................... 66

Using the keyboard.............................................. 68

Function keys................................................. 68

Special Windows

Backlit keyboard .................................................. 69

Touch screen ....................................................... 69

Touch screen navigation................................ 69

Mouse properties................................................. 70

Starting an app .................................................... 71

Starting an app from the Start screen ........... 71

Saving your work ................................................. 72

Backing up your work.......................................... 72

Toshiba’s online resources .................................. 72

keys ................................ 68

Chapter 4: Mobile Computing ................................73

Toshiba’s energy-saver design............................ 73

Running the computer on battery power............. 73

Battery Notice ................................................ 74

Power management....................................... 75

Charging batteries ............................................... 75

Charging the main battery ............................. 75

Charging the RTC battery .............................. 76

Monitoring battery power..................................... 77

Determining remaining battery power............ 78

What to do when the main battery runs

low............................................................ 79

Setting battery notifications ........................... 79

Conserving battery power ............................. 80

Power Plans ................................................... 81

Using the eco power plan.................................... 82

Changing the main battery................................... 83

Taking care of your battery.................................. 83

Safety precautions ......................................... 83

Maintaining your battery ................................ 84

Disposing of your computer ................................ 84

Contents

Traveling tips........................................................ 84

Chapter 5: Exploring Your Computer’s Features.... 86

Exploring the Start screen ................................... 86

Charms........................................................... 87

Tiles................................................................ 88

Exploring the desktop.......................................... 88

Finding your way around the desktop ........... 88

Windows

Setting up for communications............................ 91

Connecting your computer to a network ....... 92

Exploring audio features...................................... 92

Recording sounds.......................................... 92

Using external speakers or headphones ....... 93

Using the Web Camera........................................ 94

Using the Memory card reader............................ 94

Inserting memory media ................................ 95

Removing memory media.............................. 95

Store................................................... 90

Chapter 6: Utilities.................................................. 97

eco Utility® .......................................................... 98

Password Utility................................................... 99

Using a supervisor password ........................ 99

Using a user password ................................ 101

Deleting a user password ............................ 103

System Settings................................................. 104

Sleep Utilities ..................................................... 105

USB Sleep and Charge................................ 105

Enabling/Disabling USB Sleep and

Charge.................................................... 107

Power supply mode settings ....................... 107

Function Key...................................................... 108

Recovery Media Creator.................................... 109

Service Station................................................... 109

TOSHIBA Application Installer ........................... 110

Chapter 7: If Something Goes Wrong .................. 111

Problems that are easy to fix ............................. 111

Problems when you turn on the computer ........ 112

The Windows

working ........................................................ 114

Using Startup options to fix problems......... 114

operating system is not

Contents

Internet problems......................................... 117

The Windows

help you.................................................. 117

Fixing a problem with Device Manager ............. 118

Checking device properties ......................... 118

Memory problems.............................................. 119

Power and the batteries..................................... 120

Keyboard problems ........................................... 121

Display problems ............................................... 121

Disk or storage drive problems.......................... 123

Error-checking ............................................. 123

Sound system problems.................................... 125

Printer problems ................................................ 126

Wireless networking problems........................... 127

Develop good computing habits........................ 128

Data and system configuration backup in

the Windows

If you need further assistance............................ 135

Contacting Toshiba...................................... 135

Other Toshiba Internet Web sites ...................... 135

Toshiba’s worldwide offices .............................. 136

operating system can

operating system............ 129

Appendix A: TOSHIBA Function Keys ..................137

Functions ........................................................... 137

Help file ........................................................ 138

Display brightness........................................ 138

Output (Display switch) ............................... 139

Disabling or enabling the touch pad ............ 140

Media buttons.............................................. 140

Volume Mute................................................ 140

Disabling or enabling wireless devices ........ 141

Keyboard Function keys .............................. 141

Zoom (Display resolution) ............................ 141

Appendix B: Power Cord/Cable Connectors........142

Glossary..........................................................143

Index ...............................................................158

Introduction

Welcome to the world of powerful, portable, multimedia computing. With your Toshiba computer, your work and entertainment can accompany you wherever you go.

Your computer is ENERGY STAR Toshiba is a partner in the Environmental Protection

Agency’s (EPA) ENERGY STAR this computer to meet the latest ENERGY STAR for energy efficiency. Your computer ships with the power management options preset to a configuration that will provide the most stable operating environment and optimum system performance for both AC power and battery modes.

To conserve energy, your computer ships with default power settings that will turn off the display or enter low-power Sleep mode after a specific amount of inactivity. We recommend that you leave this and other energy saving features active, so that your computer will operate at its maximum energy efficiency. You can wake the computer from Sleep mode by pressing the power button. See the “Mobile Computing” section of the Toshiba User’s Guide for more information on using power management settings to conserve computer energy.

qualified.

Program and has designed

guidelines

Introduction

When considering additions to your home office, purchase products that have earned the ENERGY STAR equipment needs, which can save you money, save energy, and help protect the climate.

Visit http://www.energystar.gov or

http://www.energystar.gov/powermanagement for more

information regarding the ENERGY STAR

NOTE

This computer is compatible with European Union Directive 2002/95/EC, Restriction of the use of certain Hazardous Substances in electrical and electronic equipment (RoHS), which restricts use of lead, cadmium, mercury, hexavalent chromium, PBB, and PBDE. Toshiba requires its computer component suppliers to meet RoHS requirements and verifies its suppliers’ commitment to meeting RoHS requirements by conducting component sampling inspections during the product design approval process.

Certain Microsoft® software product(s) included with this computer may use technological measures for copy protection. IN SUCH EVENT, YOU WILL NOT BE ABLE TO USE THE PRODUCT IF YOU DO NOT FULLY COMPLY WITH THE PRODUCT ACTIVATION PROCEDURES. Product activation procedures and Microsoft’s privacy policy will be detailed during initial launch of the product, or upon certain reinstallations of the software product(s) or reconfigurations of the computer, and may be completed by Internet or telephone (toll charges may apply).

Some software may differ from its retail version (if available), and may not include user manuals or all program functionality.

for all your

Program.

Introduction

This guide

NOTE

This guide

This guide introduces the computer's features as well as some basic procedures needed to perform tasks in Windows 8. You can:

❖ Read the entire guide from beginning to end. ❖ Skim through and stop when a topic interests you. ❖ Use the table of contents and the index to find specific

information.

The product specifications and configuration information are designed for a product Series. Your particular model may not have all the features and specifications listed or illustrated. For more detailed information about the features and specifications on your particular model, please visit Toshiba’s Web site at support.toshiba.com.

While Toshiba has made every effort at the time of publication to ensure the accuracy of the information provided herein, product specifications, configurations, prices, system/component/options availability are all subject to change without notice. For the most up-to-date product information about your computer, or to stay current with the various computer software or hardware options, visit Toshiba’s Web site at

support.toshiba.com.

Safety icons

This manual contains safety instructions that must be observed to avoid potential hazards that could result in personal injuries, damage to your equipment, or loss of data. These safety cautions have been classified according to the seriousness of the risk, and icons highlight these instructions as follows:

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, may result in property damage.

Introduction

Safety icons

NOTE

Provides important information.

Other icons used

Additional icons highlight other helpful or educational information:

TECHNICAL NOTE: This icon indicates technical information about the computer.

HINT: This icon indicates helpful hints and tips.

DEFINITION: This icon indicates the definition of a term used in the text.

Introduction

Documentation

Your computer’s features and specifications

Certain computer chassis are designed to accommodate all possible configurations for an entire product Series. Your select model may not have all the features and specifications corresponding to all of the icons or switches shown on the computer chassis, unless you have selected all those features.

This information applies to all the features and icons described in this guide.

Below are examples of some of the many possible icons used on your computer:

(Sample Illustration) System icons

Documentation

Your computer comes with the following documentation:

❖ An electronic version of the User’s Guide (this document) ❖ A Quick Start document ❖ It may also include other documentation

For accessory information, visit Toshiba’s Web site at

accessories.toshiba.com.

Service options

Toshiba offers a full line of service programs to complement its standard limited warranty. Toshiba’s standard limited warranty, extended warranty, and service upgrade terms and conditions are available at warranty.toshiba.com.

To stay current on the most recent software and hardware options for your computer, and for other product information, be sure to regularly check the Toshiba Web site at

support.toshiba.com.

If you have a problem or need to contact Toshiba, see “If

Something Goes Wrong” on page 111.

Chapter 1

Getting Started

This chapter provides tips for using your computer effectively, summarizes how to connect components, and explains what to do the first time you use your computer.

Please read the safety instruction information on the Quick Start document (that shipped with your computer) carefully and make sure you fully understand the instructions before you attempt to use your computer in order to avoid potential hazards that could cause bodily injury, property damage, or damage the computer.

Selecting a place to work

Your computer is portable and designed to be used in a variety of circumstances and locations.

Setting up a work environment

Place the computer on a hard flat surface that is large enough for the computer and any other items you are using, such as a printer. Leave enough space around the computer and other equipment to provide adequate ventilation. Otherwise, they may overheat.

To keep your computer in prime operating condition, protect your work area from:

❖ Dust, moisture, and direct sunlight.

Getting Started

Selecting a place to work

❖ Equipment that generates a strong electromagnetic field,

such as stereo speakers (other than speakers that are connected to the computer) or speakerphones.

❖ Rapid changes in temperature or humidity and sources

of temperature change such as air conditioner vents or heaters.

❖ Extreme heat, cold, or humidity. ❖ Liquids and corrosive chemicals.

Keeping yourself comfortable

This section provides information for setting up your work environment and tips for working comfortably throughout the day.

Computer user comfort recommendations

Good Working Posture

❖ Adjust your chair height: your feet should be flat on the

floor and the bottom of your thighs should be evenly supported by the seat. If your feet cannot reach the floor, use a foot rest. Avoid pressure points behind the knee or under the thigh.

❖ The space under your desk should be free of clutter so

that your legs and feet are not restricted, and you can get close enough to your notebook and other items that you use frequently.

❖ Adjust the chair back rest: it should match the curve of

your back and provide comfortable back support.

❖ Adjust the chair arm rests: they should be about the

same height as the keyboard and comfortably support your arms, allowing your shoulders to relax.

❖ When using the keyboard, it should be centered in front

of you.

❖ The keyboard and pointing device should be close to

your elbow level. The keyboard should be flat so that your wrists are straight when typing. However, if the notebook is on a work surface that is above your elbow height you may need to slope the notebook to keep your wrists straight.

❖ Work with relaxed shoulders.

Getting Started

Selecting a place to work

❖ When typing, keep your wrists straight and try not to rest

your wrists on the notebook. Support your arms on your forearm area. The forearms can be supported by the chair arm supports or the desk surface.

❖ The notebook display should be tilted so that the image

on the screen is clear.

❖ Avoid glare: position the notebook so that light sources

(lamps or windows) do not shine or reflect directly into your eyes. Place the notebook display away from bright light sources or reduce the light intensity from windows by using blinds. Glare on the notebook display may cause eye strain, eye fatigue or headaches.

❖ Certain notebook displays have a brightness

approaching that of a TV device. We recommend that you adjust the brightness of your notebook display to a comfortable level to prevent possible eye strain.

❖ Keep your head level, facing forward and balanced over

your torso.

❖ Adjust the font size of text on your screen to make

viewing comfortable.

❖ Rest your eyes periodically by focusing on objects that

are farther away.

Using the notebook with an external keyboard, mouse or monitor

(Sample Illustration) Correct posture

Getting Started

Selecting a place to work

❖ When using a notebook for long hours, it may be more

comfortable to dock the notebook and use an external keyboard, mouse and monitor.

❖ The keyboard and mouse (or trackball) should be close

to your elbow level.

❖ The mouse should be next to the keyboard to avoid a

reach. If you have to reach, the arm should be supported in the forearm area by the desk surface or the chair arm supports.

❖ Alternative keyboards, such as the split curved

keyboard, may improve shoulder and arm comfort.

❖ Select a mouse that is comfortable for you to use. ❖ Don’t rest your wrists on the edge of the keyboard or on

the work surface when typing.

❖ The monitor should be about an arm length away while

sitting back in the chair.

❖ The monitor should be centered in front of your body. ❖ The top of the monitor should be at or slightly below eye

level. A monitor that is too high or too low can cause awkward head and neck postures and may lead to discomfort in the neck muscles.

❖ If you use bifocals you may need to lower the monitor.

Alternatively, you might consider customized prescription computer glasses.

Typing s tyle

❖ Learn to touch type so that you don’t have to look down

at the keyboard.

❖ Type with straight wrists. ❖ Type lightly. ❖ Learn the keyboard shortcuts for your applications. You

will be more productive.

❖ Use the pointing device (e.g., touch pad, Accupoint

tablet pen whichever is available with your notebook computer, or other optional pointing devices like mouse or trackball) with a comfortable hand posture. Avoid awkward hand postures or high gripping force.

❖ It is helpful to change the type of pointing device that

you use on a regular basis to avoid working in just one hand posture.

, or

Getting Started

Selecting a place to work

Taking breaks and varying tasks

❖ Change the way you work so that you are not stuck in

the same posture for long periods of time. Some people find it comfortable to occasionally stand while using the notebook. To do this properly, the notebook needs to be on an elevated surface. Make sure you follow the Good Working Posture points mentioned above while working.

❖ Take short, strategically spaced rest breaks to avoid eye

strain and body fatigue. For example, stand up and walk around or stretch for a few minutes every hour.

❖ Taking regular breaks is especially important if you are

working long hours on your computer or working on a deadline.

❖ If stress at work is affecting your health, try to identify

the sources of the stress and evaluate ways to reduce the stress.

Mobile computing tips

❖ When using the notebook at airports, on airplanes or

trains, or at meetings, make sure that you take the time to consider the points just mentioned.

❖ When working on the road it may be difficult to set up

the notebook in an optimal position. In these situations it is important that you take frequent breaks and change your posture frequently to relieve the excess loads on your body.

❖ Be creative, when in a hotel room, use a rolled up

blanket or pillows to provide back support, or to provide arm support. To position the computer at a good height, remember to operate the computer on a hard flat stable surface. Using your computer on a carpet, blanket or other soft materials can block the air vents including those located at the base of the computer and possibly cause overheating of your computer.

Transporting the notebook

Although your notebook is light, carrying it for a long time may lead to shoulder and arm fatigue. If you carry your notebook with other items, consider using an ergonomicallydesigned computer case.

Getting Started

Selecting a place to work

Seeking additional help

Follow the advice from your employer’s company health and safety staff. Contact them if you need assistance making adjustment to your workstation or adjusting the lighting.

Again, if you experience persistent or recurrent pain, ache, numbness, burning, or stiffness you should promptly see a qualified health care provider. These sensations may be caused by serious medical conditions that can be treated.

For more specific recommendations on the safety and comfort of your computer environment, customers in the United States may visit the United States Department of Labor, Occupational Safety & Health Administration Web site at:

http://www.osha.gov/SLTC/etools/computerworkstations/

Check list

❏ Is your chair comfortable - does it support your back and

arms well?

❏ Are your feet flat on the ground? ❏ Is there adequate space under your desk for your legs? ❏ Are the keyboard and mouse at elbow level? ❏ Are your shoulders relaxed when using the keyboard? ❏ Are your shoulders relaxed when using a mouse or other

optional pointing device?

❏ Are your hands and wrists aligned in a comfortable,

straight posture?

❏ Are your arms supported in the forearm area (not at the

wrist)?

❏ Do you hold the mouse or trackball with a loose, relaxed

hand?

❏ Do you use a light touch when typing or using the

mouse?

❏ Do you clean your mouse or trackball regularly? ❏ Is the top of your monitor close to eye level? ❏ Is the monitor about an arm length away? ❏ Have you eliminated the glare on the monitor? ❏ Is the monitor tilted so that it is easy to read? ❏ Do you change postures regularly? ❏ Do you take breaks, at least once an hour?

Precautions

Your computer is designed to provide optimum safety and ease of use, and to withstand the rigors of travel. You should observe certain precautions to further reduce the risk of personal injury or damage to the computer.

❖ Avoid prolonged physical contact with the underside or

surface of the computer.

Getting Started

Selecting a place to work

Never allow any liquids to spill into any part of your computer, and never expose the computer to rain, water, seawater or moisture. Exposure to liquid or moisture can cause electric shock or fire, resulting in damage or serious injury. If any of these eventualities should accidentally occur, immediately:

1. Turn off the computer.

2. Disconnect the AC adaptor from the power plug socket and computer.

Failure to follow these instructions could result in serious injury or permanent damage to the computer.

Do not turn on the power again until you have taken the computer to an authorized service center.

❖ Avoid prolonged physical contact with the underside

or surface of the computer.

❖ Computer base and palm rest can become hot! Avoid

prolonged contact to prevent heat injury to skin.

Today’s performance computers generate heat under normal operating conditions, as a function of system activity. Avoid extended contact between the computer base or palm rest and your skin. Under certain operating conditions such prolonged contact between the computer base or palm rest and your skin may result in skin irritation and/or heat injury.

Getting Started

Selecting a place to work

Consider using a hard computer insulating pad or similarly suitable hard insulating material when using a computer on your lap.

Never place a heavy object on the computer and be careful not to drop a heavy object onto the computer. It could damage the computer or cause system failure.

❖ Never turn off the computer if a drive light indicates a drive is

active. Turning off the computer while it is reading from or

writing to a disk/disc or flash media may damage the disk/disc or flash media, the drive, or both.

❖ Keep the computer and disks away from objects that

generate strong magnetic fields, such as large stereo speakers.

Information on some disks is stored magnetically. Placing a magnet too close to a disk can erase important files.

Handle discs carefully. Avoid touching the surface of the disc. Grasp it by its center hole and edge. If you handle the disc incorrectly, you could damage the disc and possibly lose data.

❖ Scan all new files for viruses.

This precaution is especially important for files you receive via email or download from the Internet. Occasionally, even new programs you buy from a supplier may contain a computer virus. You need a special program to check for viruses.

Getting Started

Setting up your computer

Important information on your computer’s cooling fan

Your computer may have a CPU cooling fan that cools the CPU by drawing outside air into the computer.

Always make sure your computer and AC adaptor have adequate ventilation and are protected from overheating when the power is turned on or when an AC adaptor is connected to a power outlet (even if your computer is in Sleep mode). In this condition, observe the following:

Never cover your computer or AC adaptor with any object.

Never place your computer or AC adaptor near a heat source, such as an electric blanket or heater.

Never cover or block the air vents including those located at the underside of the computer.

Always operate your computer on a hard flat surface. Using your computer on a carpet or other soft material can block the vents located at the underside of the computer.

Overheating your computer or AC adaptor could cause system failure, computer or AC adaptor damage or a fire, possibly resulting in serious injury.

NOTE

The cooling fan location will vary depending on the computer.

Setting up your computer

TECHNICAL NOTE: You must complete all setup steps up to and including “Setting up your software” on

page 42 before adding external or internal components

to your computer. These components include, but are not limited to, a mouse, keyboard, and printer.

Your computer contains a rechargeable main battery that needs to be charged before you can use it.

To use external power or to charge the battery you must attach the AC adaptor. See “Connecting to a power source”

on page 38.

Getting Started

Connecting to a power source

NOTE

Please handle your computer carefully to avoid scratching or damaging the surface.

Connecting to a power source

Your computer requires power to operate. Use the power cord/cable and AC adaptor to connect the computer to a live electrical outlet, or to charge the computer’s battery.

Never pull on a power cord/cable to remove a plug from a socket. Always grasp the plug directly. Failure to follow this instruction may damage the cord/cable, and/or result in a fire or electric shock, possibly resulting in serious injury.

Always confirm that the power plug (and extension cable plug if used) has been fully inserted into the socket, to ensure a secure electrical connection. Failure to do so may result in a fire or electric shock, possibly resulting in serious injury.

Be careful if you use a multiple connector. An overload on one socket could cause a fire or electric shock, possibly resulting in serious injury.

Always use the TOSHIBA AC adaptor that was provided with your computer, or use AC adaptors specified by TOSHIBA to avoid any risk of fire or other damage to the computer. Use of an incompatible AC adaptor could cause fire or damage to the computer possibly resulting in serious injury. TOSHIBA assumes no liability for any damage caused by use of an incompatible adaptor.

Getting Started

Power cord/cable

AC adaptor

AC adaptor cord

Connecting to a power source

(Sample Illustration) Power cord/cable and AC adaptor

To connect AC power to the computer:

1 Connect the power cord/cable to the AC adaptor.

(Sample Illustration) Connecting the power cord/cable to the AC adaptor

Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm.

hands after handling.

Wash

2 Plug the AC adaptor cord into the DC-IN on the side of

the computer.

(Sample Illustration) Connecting the AC adaptor cord to the computer

Getting Started

Charging the main battery

3 Connect the power cord/cable to a live electrical outlet.

The AC power light on the indicator panel glows white.

Never attempt to connect or disconnect a power plug with wet hands. Failure to follow this instruction could result in an electric shock, possibly resulting in serious injury.

The computer’s main battery light gives you an indication of the main battery’s current charge:

❖ Glows amber while the main battery is being charged

(AC adaptor connected)

❖ Glows amber when the main battery is fully charged ❖ Is unlit when the main battery has discharged, the

battery is not charging, or the AC adaptor is not plugged into the computer or AC outlet

❖ Flashes amber when the main battery charge is low

and it is time to recharge the main battery or plug in the AC adaptor

NOTE

If the AC power light flashes amber during charging, either the main battery is malfunctioning, or it is not receiving correct input from the AC power supply.

Charging the main battery

NOTE

Before using the battery to power the computer, you must charge the battery.

To charge the battery, leave the computer plugged into an AC power source with the computer turned off until the battery light glows white. After that, the battery will be completely charged and ready to power the computer.

NOTE

The computer’s battery is not accessible by the user.

Battery life and charge time may vary depending on the applications power management settings, and features used.

Getting Started

Using the computer for the first time

The computer is now ready for you to turn it on and begin using it, see “Exploring Your Computer’s Features” on

page 86.

NOTE

Small bright dots may appear on your screen display when you turn on your computer. Your display contains an extremely large number of thin-film transistors (TFT) and is manufactured using high-precision technology. Any small bright dots that may appear on your display are an intrinsic characteristic of the TFT manufacturing technology. Over a period of time, and depending on the usage of the computer, the brightness of the screen will deteriorate. This is also an intrinsic characteristic of the screen technology. When the computer is operated on battery power, the screen will dim and you may not be able to increase the brightness of the screen while on battery power.

When opening or closing the display panel, place one hand on the palm rest to hold the computer in place and use the other hand to slowly open or close the display panel.

To avoid damaging the display panel, do not force it beyond the point where it moves easily and never lift the computer by the display panel.

Do not press or push on the display panel and be careful to remove any pens or other objects from the keyboard area before closing the display panel.

Initial setup

The Windows 8 Startup screen is the first screen displayed when you turn on your computer for the first time. Follow the on-screen instructions on each screen in order to properly install the operating system and begin using your computer.

Getting Started

Registering your computer with Toshiba

Setting up your software

When you turn on the computer for the first time, do not turn off the power again until the operating system has loaded completely.

NOTE

The first time you turn on your computer, the setup guides you through steps to set up your software. Follow the onscreen instructions.

The names of windows displayed, and the order in which windows appear, may vary according to your software setup choices.

Registering your computer with Toshiba

Product registration is strongly recommended, and allows Toshiba to send you periodic updates, announcements, and special offers applicable to your Product. Product registration can be completed by one of three methods:

1 From the Toshiba Web site at register.toshiba.com: Type

in the requested information and complete the registration process.

2 From the Start screen: Type

Start screen, locate and complete the registration process.

3 From the Desktop: Move your pointer to the upper-right

corner of the screen or swipe in from the right edge. When the Windows

Search ( ) charm and, in the Search field, type Registration. In the list that appears, click or touch Registration and complete the registration process.

Failure to complete Product Registration will not diminish your rights under the Toshiba Standard Limited Warranty.

charms appear, click or touch the

Registration while in the

NOTE

To register online, an Internet connection is required.

Getting Started

Power

Shut down option

To Shut down your computer

1 From the Start or Desktop screen, move your pointer to

the upper-right corner of the screen or swipe in from the right edge.

2 When the Windows

Settings ( ) charm.

charms appear, click or touch the

Pressing the power button before shutting down the Windows your work. Make sure the system indicator panel’s storage drive light and the drive in-use light are off. If you turn off the power while a disk/disc is being accessed, you may lose data or damage the disk/disc and/or drive.

3 In the lower right of the screen click or touch the

() icon.

operating system could cause you to lose

(Sample Image) Shut down

4 Highlight Shut down while holding the Shift key, and

then click or touch the Shut down option. The computer closes all open applications, shuts down

the operating system, and then turns off.

To Restart your computer

Power

1 From the Start or Desktop screen, move your pointer to

the upper-right corner of the screen or swipe in from the right edge.

2 When the Windows

Settings ( ) charm.

charms appear, click or touch the

Power

Restart option

Power

Sleep option

Getting Started

To place your computer in Sleep mode

3 In the lower right of the screen click or touch the Power

() icon.

(Sample Image) Restart

4 Highlight Restart, and then click or touch the Restart

option. The computer closes all open applications, and restarts

the operating system.

To place your computer in Sleep mode

1 From the Start or Desktop screen, move your pointer to

the upper-right corner of the screen or swipe in from the right edge.

2 When the Windows

Settings ( ) charm.

If you power down using the Sleep command and the battery discharges fully, your unsaved information will be lost. Be sure to save your work first.

3 In the lower right of the screen click or touch the

() icon.

charms appear, click or touch the

Power

(Sample Image) Sleep

Getting Started

Adding optional external devices

4 Highlight Sleep, and then click or touch the Sleep

option. Sleep mode saves the current state of the computer to

memory so that, when you restart the computer, you can continue working from where you left off.

Adding optional external devices

NOTE

After starting your computer for the first time you may want to:

❖ Add more memory (see “Adding memory (optional)” on

❖ Connect external devices (see “Connecting an external

❖ Connect an external monitor (see “Using external

Before adding external devices, Toshiba recommends setting up your software. See “Setting up your software”

on page 42.

page 45

device” on page 60)

display devices” on page 61)

Adding memory (optional)

Your computer comes with enough memory to run most of today’s popular applications. You may want to increase the computer’s memory if you use complex software or process large amounts of data. Contact the location you purchased the computer at for more information on adding memory to your computer. Toshiba will not be responsible for any product damage, data loss, service or part replacement made necessary by improper installation of a memory module.

Getting Started

Recovering the Internal Storage Drive

NOTE

Your computer includes recovery utilities to allow you to recover your internal storage drive if necessary.

The following internal storage drive recovery options are available:

Recovery option Description

Creating recovery media

Restoring from recovery media

Refresh your PC (with user’s data)

Reset your PC This option allows you to remove all data from your

To purchase an optional external writable optical disc drive, visit the Toshiba Web site at

accessories.toshiba.com.

This option allows you to create the recovery media you will use to restore your computer.

See “Creating recovery media” on page 47. This option allows you to restore your system from

the recovery media you created. See “Restoring from recovery media” on page 49.

This option allows you to refresh your system without losing your data.

See “Refresh your PC (with user’s data)” on

page 51.

system and reinstall Windows See “Reset your PC” on page 53.

A recovery image of your computer is stored on the internal storage drive, and the image can be restored by running the recovery utilities directly from your internal storage drive as described in the sections below. However, it is strongly recommended that you create recovery media. If the recovery files on your internal storage drive become corrupted or are deleted, you can restore your system from your recovery media. Also, if your original internal storage drive fails, you can restore your system to a new internal storage drive from your recovery media. It is strongly recommended that you create recovery media before using your system for the first time. See “Creating recovery media”

on page 47 and “Restoring from recovery media” on page 49.

Getting Started

Recovering the Internal Storage Drive

NOTE

❖ During the recovery process your computer must be

connected to an external power source via the AC adaptor.

❖ When you restore your system, only the operating

system files, applications, and drivers originally shipped with the computer are restored. Any files that you created are not restored during this process. Be sure to separately save the files you have created to external media using Windows program. For more information, see “Backing up your

work” on page 72.

Creating recovery media

It is strongly recommended that you create recovery media. If the recovery files on your internal storage drive become corrupted or are deleted, you can restore your system from your recovery media. Also, if your original internal storage drive fails, you can restore your system to a new internal storage drive from your recovery media.

NOTE

During the recovery process your computer must be connected to an external power source via the AC adaptor.

or another backup

NOTE

When you create recovery media, the system will prompt you to insert several blank DVDs or connect one or more USB flash drives of a certain minimum capacity to your computer. The amount of space required for storing the recovery files varies by computer model. Follow the procedure below to determine how much space you will need for storing your system’s recovery files.

When you create recovery media, only the operating system files, applications, and drivers originally shipped with the computer are backed up to the external media and can be restored from this media. Any files that you created are not backed up on the recovery media. You will need to separately back up the files you created; for more information, see “Backing up your work” on

page 72.

Getting Started

Recovering the Internal Storage Drive

To create recovery media:

1 From the Start screen begin typing

Creator and click or touch your selection. If you are in

the Desktop, move your pointer to the upper-right corner of the screen or swipe in from the right edge. When the Windows charm and, in the Search field, type

Creator

selection. The TOSHIBA Recovery Media Creator dialog box

displays.

charms appear click or touch the Search ()

. In the list that appears, click or touch your

Recovery Media

(Sample Image) TOSHIBA Recovery Media Creator dialog box

2 Select DVD or USB Flash from the drop-down list,

depending on the type of external media you want to use.

3 Check the “Information” area of the dialog box to

determine the number of DVDs you will need and/or the minimum amount of storage space required for copying your system’s recovery files to USB flash drive(s).

4 Do one of the following:

❖ If you are copying files to DVD, insert a blank DVD

into the optical disc drive.

❖ If you are copying files to a USB flash drive, connect

a USB flash drive of the required minimum capacity (as specified in the TOSHIBA Recovery Media Creator utility) to your computer.

Getting Started

Recovering the Internal Storage Drive

All information stored on your DVDs or USB flash drive(s) will be erased during the process of creating the recovery media. Be sure to save the information stored on your external media to another storage device before executing this procedure, or use blank media.

5 Click or touch the

Recovery Media Creator utility dialog box.

6 Follow the on-screen prompts to complete the copy

process.

NOTE

For information on using the Recovery media you have created with the preceding steps, see “Restoring from

recovery media” on page 49.

If you are copying the recovery files to DVDs, be sure to label each DVD in the set sequentially (for example, “1 of 3,” “2 of 3,” etc.), so that you will know in which order to insert the discs during recovery.

Create button in the TOSHIBA

Restoring from recovery media

The recovery process deletes information stored on the internal storage drive. Be sure to save your work to external media before executing the recovery (see

“Backing up your work” on page 72).

NOTE

During the recovery process your computer must be connected to an external power source via the AC adaptor.

If you have created recovery media for your system, you can restore your system from such media, if necessary. For example, if your original internal storage drive fails, you can restore your system to a new internal storage drive from your recovery media. For instructions on creating recovery media, see “Creating recovery media” on page 47.

Getting Started

Recovering the Internal Storage Drive

NOTE

When you restore your system, only the operating system files, applications, and drivers originally shipped with the computer are restored. Any files that you created are not restored during this process. Be sure to separately save the files you have created to external media using Windows

or another backup program. For more information, see “Backing up your work” on

page 72.

To recover your internal storage drive from recovery media:

1 Make sure your computer is turned off. 2 Do one of the following:

❖ If your recovery files are on DVDs, insert the first

recovery DVD into your optical disc drive.

❖ If your recovery files are on a USB flash drive,

connect the USB flash drive to your computer.

3 Turn on your computer while pressing the

F12 key on

your keyboard. The Boot menu displays.

4 Using the arrow keys, select the

option, depending on which type of media you are

Flash

using, and then press the

DVD option or the USB

ENTER key.

5 A warning screen appears, stating that when the

recovery is executed all data on your internal storage drive will be deleted and rewritten. Click or touch continue.

6 Follow the on-screen instructions to complete the

recovery process. When the process is complete, a message displays

indicating that the drive has been recovered.

7 Click or touch

Finish to restart the computer.

Yes to

Getting Started

Recovering the Internal Storage Drive

Refresh your PC (with user’s data)

Using “Refresh your PC” recovers your internal storage drive to factory default state and attempts to save your data. Toshiba does not guarantee successful data backup. Please make a complete back up of your data to external media before executing the recovery. For more information, see “Backing up your work” on page 72.

NOTE

You can recover the factory default software (refresh your PC), while the computer will attempt to back up your data using the utilities stored on your computer’s internal storage drive:

1 From the Start or Desktop screen, move your pointer to

2 When the Windows

During the recovery process your computer must be connected to an external power source via the AC adaptor.

TECHNICAL NOTE: Your data will be copied into the backup folder. All of the data will be moved to this folder during the recovery process, however the current directory structure will be retained.

the upper-right corner of the screen or swipe in from the right edge.

charms appear click or touch the

Settings ( ) charm.

Getting Started

Recovering the Internal Storage Drive

3 Click or touch Change PC Settings.

The PC settings window appears.

(Sample Image) PC settings screen

4 Click or touch General. 5 Scroll down to “Refresh your PC without affecting your

files,” and click or touch The “Refresh your PC” screen appears.

Get Started.

(Sample Image) Refresh your PC screen

Toshiba does not guarantee successful data back up. Be sure to save your work to external media before executing the recovery (see “Backing up your work” on

page 72).

Getting Started

Recovering the Internal Storage Drive

6 Click or touch the Next button to begin.

The “Ready to refresh your PC” screen appears.

(Sample Image) Ready to refresh your PC screen

You will be prompted to refresh your system.

7 Click or touch the 8 Your system will restart.

The “Refreshing your PC” window appears. When the

process is complete your system will reboot your

Windows

operating system.

Refresh button.

Reset your PC

The recovery process deletes information stored on the internal storage drive. Be sure to save your work to external media before executing the recovery (see

“Backing up your work” on page 72).

NOTE

1 From the Start or Desktop screen, move your pointer to

2 When the Windows

During the recovery process your computer be must connected to an external power source via the AC adaptor.

the upper-right corner of the screen or swipe in from the

right edge.

Settings ( ) charm.

charms appear click or touch the

Getting Started

Recovering the Internal Storage Drive

3 Click or touch Change PC Settings.

The PC settings window appears.

(Sample Image) PC settings screen

4 Click or touch General. 5 Scroll down to “Remove everything and reinstall

Windows,” and click or touch The “Reset your PC” screen appears.

Get Started.

(Sample Image) Reset your PC screen

Getting Started

Recovering the Internal Storage Drive

6 Click or touch the Next button.

The “Do you want to fully clean your drive?” screen

appears.

(Sample Image) Do you want to fully clean your drive? screen

7 Select one of the following options:

Just remove my files

❖

❖ Fully clean the drive

The “Ready to reset your PC” screen appears.

(Sample Image) Ready to reset your PC screen

8 Click or touch the Reset button.

The “Resetting your PC” window appears. When the

process is complete your system will reboot your

Windows

operating system.

Search field

Getting Started

Recovering the Internal Storage Drive

NOTE

Selecting the “Fully clean the drive” option may take several hours.

Installing drivers and applications

The TOSHIBA Application Installer allows you to reinstall the drivers and applications that were originally bundled with your computer.

To reinstall drivers and applications:

1 From the Start screen begin typing

Application Installer and click or touch your selection.

If you are in the Desktop, move your pointer to the upper-right corner of the screen or swipe in from the right edge. When the Windows touch the type appears, click or touch your selection.

Search ( ) charm and, in the Search field,

TOSHIBA Application Installer. In the list that

charms appear click or

TOSHIBA

(Sample Image) Installing drivers and applications

2 Click or touch Next. 3 Click or touch the item you want to install. 4 Click or touch 5 Follow the on-screen prompts to complete the

installation process, see “TOSHIBA Application Installer”

on page 110.

Install.

Using the touch pad

Touch pad

Secondary control buttonPrimary control button

Touch pad ON/OFF indicator

Getting Started

Using the touch pad

NOTE

You can use the touch pad (the small, touch-sensitive area in front of the keyboard) and the adjacent control buttons to:

❖ Move the pointer on the screen ❖ Select an item on the screen ❖ Open or activate an item on the screen ❖ Scroll through a document or information ❖ Zoom in for a close-up view ❖ Zoom out to see more information at once

Some of the touch pad operations described in this section are only supported in certain applications, and only on certain models.

(Sample Illustration) The touch pad and associated control buttons

Refer to the table below for specific instructions on performing each operation.

NOTE

The

pointer

is the icon (usually an arrow) that moves on the screen when you slide your finger across the touch pad or move a mouse connected to your computer.

Getting Started

Using the touch pad

To: Do the following: Example:

Move the onscreen pointer

Slide your finger across the touch pad in the direction you want to move the pointer.

To move the pointer a longer distance, slide your finger several times across the touch pad in the preferred direction.

Select an item 1 Move the pointer to the item

you want to select.

2 Do one of the following:

❖ Tap the touch pad once

❖ Press and release the

primary (left-hand) control button

Open or activate an item

1 Move the pointer to the item

you want to open/activate.

2 Do one of the following:

❖ Tap the touch pad twice

in rapid succession

❖ Press and release the

primary control button twice in rapid succession

(Sample Illustration) Pointer moves to the right

(Sample Illustration) Tap once to select

(Sample Illustration) Tap twice to open

Right-click an item

1 Move the pointer to the item

you want to right-click.

2 Press and release the

secondary control button.

This feature varies by program. Check your program documentation for specific instructions on right-clicking.

(Sample Illustration) Click the secondary (right-hand) control button

Getting Started

Using the touch pad

To: Do the following: Example:

Scroll vertically Slide two fingers along the right

edge of the touch pad in the direction you want to scroll. Repeat to scroll a longer distance.

(Sample Illustration) Vertical scrolling active area

Scroll horizontally

Slide two fingers along the bottom edge of the touch pad in the direction you want to scroll. Repeat to scroll a longer distance.

Zoom in/out To zoom in:

❖ Place two fingers close

together on the touch pad and then slide them apart.

To zoom out:

❖ Place two fingers

slightly apart on the touch pad and then slide them together.

(Sample Illustration) Horizontal scrolling active area

(Sample Illustration) Zooming in

(Sample Illustration) Zooming out

Getting Started

Using the touch pad

Adjusting touch pad settings

While you are typing, the on-screen pointer may seem to move or jump around “by itself” to random locations on the screen. The on-screen pointer may also seem to automatically select text, click buttons, and activate other user interface elements. For help with these problems, try one or more of the following:

❖ Try adjusting your typing technique to avoid accidental

contact with the touch pad. You may be inadvertently brushing the touch pad with the heel of your hand as you type. Also, accidental light touches or taps on the touch pad may select an item or text on the screen, and potentially the item or text may be replaced by the next character you type.

❖ Temporarily disable the touch pad, so that it does not

respond to touch or button presses while you type. See

“Disabling or enabling the touch pad” on page 60.

❖ Adjust the sensitivity of the touch pad, so that it is less

responsive to accidental light taps and lighter finger pressure.

NOTE

Touch pad setting options vary by computer model. The touch pad settings are accessible through the Mouse Properties option of the Windows Control Panel. For more information, please visit support.toshiba.com.

Disabling or enabling the touch pad

The touch pad is enabled by default. To enable/disable the touch pad, press F5. For more information, see “Disabling or

enabling the touch pad” on page 140.

Connecting an external device

NOTE

You can easily attach an external device your computer. To d o t h is :

1 Read the directions that came with the device to see if

Depending on your system, some models may include USB 3.0 port(s). To distinguish these ports, please look for the blue inset within the USB 3.0 port (if available).

you first need to install new software.

Getting Started

HDMI™ Out port*

*Available on certain models

Using external display devices

2 Connect the device’s video or USB cable to the port on

the computer and to the device.

3 Connect the device’s power cable to a live electrical

outlet (if applicable).

4 Turn on the external device (if applicable).

Your computer may automatically detect the external device.

Using external display devices

Your computer comes with a built-in display, however you can also connect an HDMI™-compatible external display device via the HDMI™ Out port*.

NOTE

To locate your HDMI™ port*, please refer to your Quick Start document.

(Sample Illustration) Video port on right side of computer

Selecting video cables

To connect a device to the HDMI™ Out port, you must purchase an HDMI™ cable.

Connecting an HDMI™-compatible television or display device

To connect an HDMI™-compatible television or display device to the computer:

❖ Connect one end of an HDMI™ cable (not included with

your computer) to the HDMI™ Out port on the side of your computer, and then connect the other end of the cable to your television or display device. Refer to the manual that came with the television or display device for more information.

Your computer should automatically detect the external display device.

Getting Started

Using external display devices

Connecting an external monitor or projector

You can easily attach an external monitor or projector to your computer if you need a larger screen.

To d o t h is :

1 Read the directions that came with the monitor to see if

you first need to install new software.

2 Connect the monitor’s video cable to the RGB (monitor)

port on the side of the computer.

3 Connect the device’s power cable to a live electrical

outlet.

4 Turn on the external device.

Your computer will automatically detect the external display device.

NOTE

You can change the display settings by pressing the () +

P keys, or by configuring the display properties

settings.

Directing the display output when you turn on the computer

Once you have connected an external display device, you can choose to use the internal display only, the external device only, or both simultaneously.

NOTE

The quickest way to change the display output settings is to use the ( ) +

Press the ( ) + takes effect. Briefly pause each time you press the ( ) + keys to allow time for the display to change.

Some modes are only available with the appropriate device attached and turned on.

P keys:

P keys repeatedly until the setting you want

Getting Started

Using external display devices

This cycles through the settings in the following order (the last two options are available if an external monitor is connected):

❖ PC screen only ❖ Duplicate ❖ Extend ❖ Second screen only

(Sample Image) Display options window

NOTE

The ( ) + P keys navigate through the options without activating a selection. Press selection.

You may also use the F4 key, and then press ENTER to activate a selection.

ENTER to activate a

Adjusting the quality of the external display

To obtain the best picture quality from your television (or other video display device), you may need to adjust the video settings. See the video device documentation for additional configuration steps.

Getting Started

Customizing your computer’s settings

There are several ways in which you can customize your computer to suit your particular requirements. You can go into your computer settings to make adjustments to your computer to suit your needs.

From the Start or Desktop screen, move your pointer to the upper-right corner of the screen or swipe in from the right edge. When the Windows

Settings ( ) charm, and then click or touch Change PC Settings

Refer to your operating system documentation or Help and Support for details.

You may also wish to customize your power usage settings. For more information, see “Power Plans” on page 81. There are additional custom settings you can choose. See

“Utilities” on page 97.

. Then choose a category you wish to change.

charms appear, click or touch the

Caring for your computer

This section gives tips on cleaning and moving your computer. For information about taking care of your computer’s battery, see “Taking care of your battery” on

page 83.

NOTE

Please handle your computer carefully to avoid scratching or damaging the surface.

Cleaning the computer

Keep liquids, including cleaning fluid, out of the computer’s keyboard, speaker, and other openings. Never spray cleaner directly onto the computer and/or display. Never use harsh or caustic chemical products to clean the computer.

To keep your computer clean, gently wipe the display panel and exterior case with a lightly dampened cloth.

Moving the computer

Before moving your computer, even across the room, make sure all drive activity has ended (the internal storage drive and optical disc drive indicator lights stop glowing) and all external peripheral cables are disconnected.

Do not pick up the computer by its display panel or by the back. Doing so could damage the system.

Getting Started

Caring for your computer

Chapter 2

Learning the Basics

This chapter gives some computing tips and provides important information about basic features.

Computing tips

❖ Save your work frequently.

Your work stays in the computer’s temporary memory until you save it to the internal storage drive. If the network you are using goes down and you must restart your computer to reconnect, or your battery runs out of charge while you are working, you will lose all work since you last saved.

See “Saving your work” on page 72 for further information.

HINT: Some programs have an automatic save feature that can be activated. This feature saves your file to the internal storage drive at preset intervals. See your software documentation for details.

Learning the Basics

Computing tips

❖ Back up your files to external media on a regular basis.

Label the backup copies clearly and store them in a safe place.

It is easy to put off backing up because it takes time. However, if your internal storage drive suddenly fails, you will lose all the data on it unless you have a separate backup copy. For more information, see “Data and

system configuration backup in the Windows system” on page 129.

❖ Use Error-checking and Disk Defragmenter regularly to

check and optimize disk space and improve performance.

❖ Scan all new files for viruses.

This precaution is especially important for files you receive via external media, email, or download from the Internet.

❖ Take frequent breaks to avoid repetitive-motion injuries

and eyestrain.

❖ Do not turn off the computer if a drive indicator light

indicates a drive is active. Turning off the computer while it is reading from or

writing to a disk may damage the disk, the drive, or both.

operating

NOTE

The Windows® operating system records information, such as your desktop setup, during its shutdown procedure. If you do not let the Windows system shut down normally, details such as new icon positions may be lost.

operating

Application key

Windows

key

Learning the Basics

Using the keyboard

Your computer’s keyboard contains character keys, control keys, function keys, and special Windows

(Sample Illustration) Keyboard

Function keys

The function keys (not to be confused with the Fn key) are the 12 keys at the top of the keyboard.

(Sample Illustration) Function keys

F1 through F12 are called function keys because they

execute programmed functions when pressed. Used in combination with the icons execute specific functions on the computer. For example, information, see “TOSHIBA Function Keys” on page 137.

keys.

Fn key, function keys marked with

F5 turns the touch pad ON/OFF. For more

Special Windows® keys

(Sample Illustration) Special Windows® keys

Your computer’s keyboard has one key and one button that have special functions in Windows

❖

Windows® key—Toggles between the Desktop screen

and the last app opened on the Start screen. For more information refer to Help & Support, or see “Exploring

the Start screen” on page 86

Learning the Basics

❖ Application key—Has a similar function as the

secondary mouse button

Backlit keyboard

(Available on certain models.)

Your keyboard may have a backlight illumination feature. If the keyboard backlight setting is set to Auto, the backlight turns on when you type on the keyboard and turns off after a certain interval when you stop typing. You can modify the time-out interval or change the keyboard backlight setting to always on or always off.

Touch screen

(Available on certain models.)

Your computer may come with a touch screen, enabling direct interaction with displayed apps and programs through simple or multi-touch gestures.

Touch screen navigation

Use your finger to manipulate the on-screen icons, buttons, menu items, and other items on the touch screen. You can also change the screen’s orientation.

Backlit keyboard

The screen is made of glass so avoid contact with sharp, rough, or abrasive objects or substances as screen may break or scratch if not handled properly. If you see a crack in the glass, discontinue use of the device to avoid injury.

Touch—Touch to activate items displayed on the screen,

such as app and setting icons or on-screen buttons. Touch to type using the keyboard.

Touch & hold—Touch and hold an item on the screen by

touching and holding the item in place until an action occurs.

Drag—Touch and hold an item for a moment and then,

without lifting your finger, move the item until you reach the target position. For example, drag items on any app screen to reposition them.

Swipe or slide—To swipe or slide, quickly move your finger

across the surface of the screen without pausing. For example, swipe your finger to the left from the right edge of the screen to display the Windows

charms.

Learning the Basics

Mouse properties

Double-tap—Tap quickly twice to zoom in. For example,

double-tap a section of a Web page to zoom in on that section. Double-tap again to zoom out.

Pinch—In some apps (such as Maps and Games), you can

zoom in and out by placing two fingers on the screen at once and pinching them together (to zoom out) or spreading them apart (to zoom in).

Rotate—Place two or more fingers on an item and rotate

your hand. The item rotates in the direction you turn your hand. (Not functional in all apps).

Mouse properties

Mouse properties allow you to change your pointing device or mouse settings.

To access Mouse properties:

1 Move your pointer to the upper-right corner of the screen

or swipe in from the right edge. When the Windows charms appear click or touch the click or touch

Mouse. In the list that appears, click or touch your

selection. The Mouse Properties screen appears. You may change some of the settings in the following

categories:

❖ Buttons ❖ Pointers ❖ Pointer Options ❖ Wheel ❖ Hardware ❖ Device Settings

You may see additional categories depending on your particular pointing device.

2 Adjust the settings as desired, and then click or touch

OK.

Settings and, in the Search field, type

Search ( ) charm,

Learning the Basics

Starting an app

To Start an app on the Start screen, move your pointer over the appropriate tile and click or touch to open.

To Start an app from the Desktop, move your pointer to the upper-right corner of the screen or swipe in from the right edge. When the Windows click or touch the

Start ( ) charm.

Starting an app from the Start screen

To Start an app on the Start screen, move your pointer over the appropriate tile and click or touch to open, or swipe your finger to the left from the right edge of the screen.

To Start an app using the Search function, move your pointer to the upper-right corner of the screen or swipe in from the right edge. When the Windows right, click or touch the appears with the available system apps to choose from or you can enter your search in the search field.

Below is an example using the Search field to start an app:

1 Move your pointer to the upper-right corner of the screen

or swipe in from the right edge. When the Windows charms appear click or touch the

charms slide out from the right,

charms slide out from the

Search ( ) charm. The apps screen

Search ( ) charm.

(Sample Image) Searching for apps

2 Start typing the app’s name in the Search field.

As you type, all matching files and apps are displayed.

3 Click or touch the app you wish to open.

Learning the Basics

Saving your work

Before you turn off the computer using the Shut down command, save your work on the internal storage drive, external media, flash media, or optical disc. This is one of the most important rules of computing.

Many applications offer a feature that saves documents at regular intervals. Check your program’s documentation to see if it has an automatic save feature.

Backing up your work

Back up all the files you create in case something happens to your computer. You can back up your files to different types of media such as CDs, DVDs, external storage media, or to a network, if available.

To back up several files at one time, use the Microsoft Windows computer’s internal storage drive. Also see “Backing up your

data or your entire computer with the Windows system” on page 131.

file recovery program preinstalled on the

HINT: Backing up all the files on your internal storage drive may take a considerable amount of time and multiple CDs/DVDs. You may prefer to use a highcapacity file recovery system, such as an external hard drive.

operating

Toshiba’s online resources

Toshiba maintains a number of online sites to which you can connect. These sites provide information about Toshiba products, give help with technical questions and keep you up to date with future upgrades. For more information, see

“Contacting Toshiba” on page 135.

Chapter 3

Mobile Computing

This chapter covers all aspects of using your computer while traveling.

Toshiba’s energy-saver design

Your computer enters a low-power suspension mode when it is not being used, thereby conserving energy and saving money in the process. It has a number of other features that enhance its energy efficiency.

Many of these energy-saving features have been preset by Toshiba. We recommend you leave these features active, allowing your computer to operate at its maximum energy efficiency, so that you can use it for longer periods while traveling.

Running the computer on battery power

The computer contains a Lithium-Ion (Li-Ion) battery that provides power when you are away from an AC outlet. You can recharge it many times.

Mobile Computing

Running the computer on battery power

Battery Notice

Battery life rating is for comparison purposes only, and does not indicate the battery life that will be obtained by any individual user. Actual battery life may vary considerably from specifications depending on product model, configuration, applications, power management settings and features utilized, as well as the natural performance variations produced by the design of individual components. The battery life rating is only achieved on the select models and configurations tested by Toshiba under the specific test settings at the time of publication and is not an estimate of a system’s battery life under any conditions other than the specific test settings.

Recharge time varies depending on usage. Battery may not charge while the computer is consuming full power. After a period of time, the battery will lose its ability to perform at maximum capacity and will need to be replaced. This is normal for all batteries.

To ensure that the battery maintains its maximum capacity, operate the computer on battery power at least once a month. The Lithium-Ion battery has no memory effect so it is not necessary to let the battery fully discharge each time. However, for better accuracy of the battery meter, it is helpful to fully discharge the battery periodically. Please see

“Maintaining your battery” on page 84 for procedures. If the

computer is continuously operated on AC power, either through an AC adaptor or a port replicator (if applicable to your system), for an extended period (more than a month), the battery may fail to retain a charge. This may shorten the life of the battery, and may cause the battery meter to be inaccurate.

NOTE

The computer also has an internal real-time-clock (RTC) battery.

For best performance when playing streaming media (especially streaming video), either power the computer from its AC adaptor, or set up a power plan that keeps the computer running at full performance even when powered from its battery. For more information about Windows® power plans, see “Power Plans” on page 81.

The RTC battery powers the RTC memory that stores your system configuration settings and the current time and date information. It maintains this information for up to a month while the computer is turned off.

TECHNICAL NOTE: Depending on your system, the RTC battery may only charge while the computer is turned on.

Power management

Your computer ships with the power management options preset to a configuration that will provide the most stable operating environment and optimum system performance for both AC power and battery modes.

Changes to these settings may result in system performance or stability issues. Users who are not completely familiar with the power management component of the system should use the preset configuration. For assistance with setup changes, contact Toshiba’s Customer Support Center.

Mobile Computing

Charging batteries

The battery needs to be charged before you can use it to power the computer.

Always use the AC adaptor specified by Toshiba. You can order a Toshiba AC adaptor from Toshiba’s Web site at accessories.toshiba.com.

NOTE

Charging the main battery

The battery needs to be charged before you can use it to power the computer.

To charge the main battery, plug the computer into a live electrical outlet. The battery charges whether the computer is on or off.

Battery charge time may vary depending on the applications, power management settings, and features used.

Mobile Computing

Charging batteries

TECHNICAL NOTE: The recharging of the battery may not occur when your computer is using all of the power provided by the AC adaptor to run applications, features, and devices. Your computer's Power Options utility can be used to select a power level setting that reduces the power required for system operation and will allow the battery to recharge.

The battery may not start charging immediately under the following conditions:

❖ The battery is extremely hot or cold.

To ensure that the battery charges to its full capacity, wait until it reaches room temperature (50 to 80 degrees Fahrenheit, 10 to 26 degrees Celsius).

❖ The battery is almost completely discharged.

Leave the power connected and the battery should begin charging after a few minutes.

HINT: Once the battery is fully charged, we recommend that you periodically operate your computer on battery power until the battery discharges completely.

Please make a complete back up of your data to external media before discharging the battery. For more information, see “Backing up your work” on page 72.

Charging the RTC battery

Your computer has an internal real-time clock (RTC) battery. The RTC battery powers the System Time Clock and BIOS memory used to store your computer’s configuration settings. When fully charged, it maintains this information for up to a month when the computer is powered off.

The RTC battery may have become completely discharged while your computer was shipped, resulting in a CMOS error message during startup. The error message may vary by computer model.

Mobile Computing

Monitoring battery power

NOTE

To recharge the RTC battery, plug the computer into a live electrical outlet and leave the computer powered on for 24 hours.

NOTE

The computer can be used while the RTC battery is being charged, although the charging status of the RTC battery cannot be monitored.

Depending on your system, the RTC battery may only charge while the computer is turned on.

It is seldom necessary to charge the RTC battery because it charges while the computer is on. If the RTC battery is low, the real-time clock and calendar may display the incorrect time and date or stop working.

When Hibernation mode is enabled and the RTC battery is completely discharged, a warning prompts you to reset the real-time clock.

Monitoring battery power

The computer’s main battery light gives you an indication of the main battery’s current charge.

❖ Glows amber while the main battery is being charged

(AC adaptor connected)

❖ Glows white when the main battery is fully charged

NOTE

❖ Flashes amber when the main battery charge is low and

NOTE

Battery life and charge time may vary, depending upon power management settings, applications and features used.

it is time to recharge the main battery or plug in the AC adaptor

If the AC power light flashes amber during charging, either a battery pack is malfunctioning, or it is not receiving correct input from the AC power supply.

AC power light/Battery light

System indicator lights

ON/OFF button/light

Wireless indicator light

Mobile Computing

Monitoring battery power

HINT: Be careful not to confuse the battery light ( )/power light ( ), and the power button light.

When the power light or power button light flashes amber, it indicates that the system is suspended (using the Windows® operating system Sleep command).

(Sample Illustration) Power and battery light locations

Determining remaining battery power

NOTE

Move the pointer over the power icon in the notification area, see “Finding your way around the desktop” on page 88 for more information on the notification area. A pop-up message displays the remaining battery power as a percentage.

With repeated discharges and recharges, the battery’s capacity gradually decreases. A frequently used older battery does not power the computer for as long as a new battery, even when both are fully charged.

Wait a few moments after turning on the computer before trying to monitor the remaining battery power. The computer needs this time to check the battery’s remaining capacity and perform its calculations.

Mobile Computing

Monitoring battery power

TECHNICAL NOTE: The computer drains the battery faster at low temperatures. Check your remaining charge frequently if you are working in temperatures below 50 degrees Fahrenheit.

The computer calculates the remaining battery charge based on your current rate of power use and other factors such as the age of the battery.

What to do when the main battery runs low

When the main battery runs low you can:

❖ Plug the computer into an external power source and

recharge the main battery

❖ Save your work and turn off the computer

If you do not manage to do any of these things before the main battery completely runs out of power, the computer automatically enters Hibernation mode and turns itself off. Hibernation mode keeps track of where you were, so that when you turn on the power again, you can continue where you left off.

Setting battery notifications

You can set two notifications. Each notification can be set to alert you when a specified percentage of remaining battery power has been reached. You can also set the computer to enter Sleep mode or Hibernation mode or to completely shut down when the notification goes off.

To change the default notification settings:

1 While on the desktop, click or touch the

icon in the notification area.

2 Click or touch

The Power Options window appears.

3 Click or touch

plan to be customized. The Edit Plan Settings window appears.

4 Click or touch

The Advanced settings tab of the Power Options window appears.

More power options.

Change plan settings under the power

Change advanced power settings.

Battery ()

Mobile Computing

Monitoring battery power

5 Double-click or touch Battery to display the battery

options.

(Sample Image) Advanced settings tab of Power Options screen

6 Configure the alarm settings to suit your needs.

Conserving battery power

How long a fully charged battery pack lasts when you are using the computer depends on a number of factors, such as:

❖ How the computer is configured ❖ How much you use the internal storage drive or other

optional devices

❖ Where you are working, since operating time decreases

at low temperatures

There are various ways in which you can conserve power and extend the operating time of your battery:

❖ Enable Sleep or Hibernation, which saves power when

you turn off the computer and turn it back on again

❖ Use the Windows

power-saving option plans

These power-saving options control the way in which the computer is configured. By using them, you can increase the length of time you can use the computer before you need to recharge the battery.

Microsoft Plans. Using one of these power plans lets you choose between maximum power savings and peak system performance. You may also set individual power-saving options to suit your own needs.

The following sections describe how to choose a Power Plan and discuss each power-saving option.

Power Plans

You can choose a predefined Power Plan or select your own combination of power options.

To d o t h is :

1 While on the desktop, click or touch the

icon in the notification area.

2 Click or touch

The Windows

Mobile Computing

Monitoring battery power

has combined these options into preset Power

Battery ()

More power options.

Power Options window appears.

(Sample Image) Windows® Power Options window

3 Select an appropriate plan for your work environment or

create your own custom plan.

4 Click or touch

set up a new plan.

Create a power plan in the left pane to

Mobile Computing

Using the eco power plan

NOTE

To edit a plan or to edit advanced settings, continue to the following steps.

5 Click or touch

Change plan settings to choose the

plan you want to edit. This screen allows you to change basic settings.

6 Click or touch

Change advanced power settings to

access settings for battery notification levels, internal storage drive power save time, etc.

You can click or touch the plus signs to expand each item and to see what settings are available for each item.

7 Click or touch

OK to save the plan changes you have

performed.

Depending on your model, the two power plans eco and Balanced are satisfactory for most people and do not need to be edited. The eco plan is the best used for maximum battery time. The Balanced plan is a compromise between battery time and performance.

Using the eco power plan

This computer is equipped with the eco power plan. Operating the computer with this power plan enabled reduces electrical power consumption by slightly lowering system performance. For example, when this power plan is enabled, the brightness of the display is reduced and the interval before Sleep mode takes effect is shortened. To enable or disable the eco power plan, see “Power Plans” on

page 81.

The eco Utility eco power plan by tracking real-time power consumption and accumulated savings over time. To learn how to access the utility, see “eco Utility

For more information on the eco power plan, see the Help file in the eco Utility

monitors your power savings from using the

” on page 98.

window.

Mobile Computing

Changing the main battery

NOTE

When your main battery has run out of power, plug in the AC adaptor.

If you find that a new battery is needed, contact the location you purchased the computer at for more information on replacing the battery. Toshiba will not be responsible for any product damage, data loss, service or part replacement made necessary by improper installation of a new battery.

The computer’s battery is not accessible by the user.

If the computer is leaking or its case is cracked, put on protective gloves to handle it.

Taking care of your battery

The following sections offer tips on how to take care of your battery and prolong its life.

Safety precautions

Always immediately turn the power off and disconnect the power cable/cord plug from the plug socket and stop using the computer if you observe any of the following conditions:

❖ Offensive or unusual odor ❖ Excessive heat ❖ Discoloration ❖ Deformation, cracks, or leaks ❖ Smoke ❖ Other unusual events during use, such as abnormal

sound

Do not expose the computer to fire. The battery could explode.

Do not turn on the computer’s power again until an authorized Toshiba service provider has checked it for safety. Continued use could cause a fire or rupture possibly resulting in serious injury or computer failure including but not limited to the loss of data.

Mobile Computing

Disposing of your computer

Maintaining your battery

Fully discharging your battery pack will allow better accuracy of the battery meter.

To fully discharge your battery pack, periodically, disconnect the computer from a power source and operate it on battery power until the battery pack fully discharges.

Disposing of your computer

Never attempt to dispose of a computer by burning or by throwing it into a fire, and never allow exposure to a heating apparatus (e.g., microwave oven). Heat can cause a computer to explode and/or release caustic liquid, both which may possibly cause serious injury.

Discard this computer in accordance with applicable laws and regulations.

Disposal of this product may be regulated due to environmental considerations. For disposal, reuse or recycling information, please contact your local government.

In addition, Toshiba’s recycling initiatives include recycling programs, events and consumer promotions. For details, please visit us.toshiba.com/green.

Notice regarding CR coin cell batteries, applicable to California, U.S.A. only:

Perchlorate Material - special handling may apply. See http://www.dtsc.ca.gov/hazardouswaste/perchlorate/

Traveling tips

The environmental precautions listed in “Selecting a place to

work” on page 29, also apply while traveling.

❖ Never leave your computer on a sunny ledge or in a

place where it could get wet or covered in dust.

❖ Always travel with the computer in a carrying case.

Toshiba offers a choice of carrying cases for the computer. They all provide plenty of extra space for manuals, power cords, and compact discs. Contact your authorized Toshiba representative for more information or visit Toshiba’s Web site at accessories.toshiba.com.

Mobile Computing

Traveling tips

TECHNICAL NOTE: When traveling by air, you may be required to pass your computer through airport security equipment. The X-ray equipment will not harm your computer.

NOTE

Before using your computer aboard an aircraft, make sure the Wireless antenna is OFF (Airplane mode is ON) if your computer has wireless LAN capability.

To enable or disable wireless communication, use the

F12 key. For more information see “TOSHIBA Function

Keys” on page 137.

Chapter 4

Exploring Your Computer’s Features

In this chapter, you will explore some of the special features of your computer.

Exploring the Start screen

The Start screen is the launching pad for everything you can do in the Windows easy ways to access everything from your favorite apps and Web sites to your contacts and other important information.

When you move your pointer to the upper-right corner of the screen or swipe in from the right edge, a list of Windows charms will slide out from the right. These Windows perform various commands, including basics tasks like turning off the power and advanced PC settings.

You can go to the Start screen by clicking or touching the

Start charm, see “Charms” on page 87. You can also use

the Windows screen to go to the Start screen. For detailed information, please refer to the Windows

By clicking on or touching the Desktop tile from the Start screen, you will find the Windows are most familiar with.

operating system, providing new and

key ( ) on your keyboard or on the LCD

Help and Support.

settings and features you

charms

Exploring Your Computer’s Features

App tiles

Exploring the Start screen

For detailed information on the new Windows 8 functionality, refer to the Windows

(Sample Image) Windows® Start screen

Charms

Use the Windows® charms to start apps, find documents, set up system components, and perform most other computing tasks.

By moving your pointer to the upper-right corner of the screen or swiping in from the right edge your screen, you will find a list of charms:

Settings. Search—This charm allows you to search for most anything

you need to locate on your computer. It can help you find apps, documents, photos, and your favorite music.

Share—This charm allows you to share music and photos

with your favorite social Web sites.

Start—This charm allows you to view all of the available

apps downloaded to your system.

Devices—This charm allows you to manage your hardware

devices.

Settings—This charm allows you to manage your system

settings.

Help and Support.

Search, Share, Start, Devices and

Ta s k b ar

Icons

Notification area

Notifications

Exploring Your Computer’s Features

Exploring the desktop

Tiles

Tiles can be accessed and launched from the Start screen. Typical Start screen tiles are the Desktop tile and Mail tile, as

well as tiles representing all other applications downloaded to your system.

Exploring the desktop

You can use its features to start applications, find documents, set up system components, and perform most other computing tasks.

HINT: The illustrated examples in this guide may appear slightly different from the screens displayed by your system. The differences are not significant and do not indicate any change in the functionality of your system.

Finding your way around the desktop

Your computer’s desktop includes several standard features: icons, taskbar, notification area, notifications, and background pattern.

(Sample Image) Windows® Desktop screen

Exploring Your Computer’s Features

Exploring the desktop

Icons

An icon represents a folder, file, or program that can be quickly activated by double-clicking or touching the icon.

You can create a new desktop icon for any folder, file, or program by dragging the element’s icon from its location in a window to the desktop area.

You may see various icons displayed on your system desktop, for example:

Recycle Bin—Holds files you have deleted. You may be able to retrieve these files until you empty the Recycle Bin.

❖ TECHNICAL NOTE: If you delete a large number of

files or very large files from the internal storage drive, there may be insufficient space available in the Recycle Bin to hold these files. In this case, Windows delete the file(s) or cancel the deletion.

❖ If you delete a file (of any size) from an external

media or flash media, it does not go into the Recycle Bin. The file is permanently deleted.

❖ Permanently deleted files cannot be recovered from

the Recycle Bin. For more information on the Recycle Bin, see Windows® online Help.

will prompt you to either permanently

NOTE

Your desktop may contain other icons depending on your configuration. See Windows information on each icon and how to use it, or see “Help file”

on page 138.

If you place the pointer over an icon, a popup description of the file contents appears.

online Help for more specific

Taskba r

Each time you open a program, a button associated with that program appears on the taskbar. With some programs, a button appears on the taskbar for each document or window you open. You can use these buttons to quickly switch between the programs or windows.

To make a program or window the currently active one, click or touch the associated taskbar button.

Exploring Your Computer’s Features

Windows® Store

Notification area

The notification area displays icons of tasks or programs that run continuously in the background and displays notifications. To learn more about each task, position the pointer over the icon for a few moments and a short description of the task appears.

Typical tasks in the notification area are Current time, Power usage mode, network connectivity status, and speaker volume.

To activate a specific task, click or touch the appropriate notification area icon.

Notifications

There are many types of notifications you can employ to help you with the many tasks you perform every day.

User experience notifications can be set for toast, tile, badge, and raw notifications.

Toast notifications—Designed for time-sensitive delivery

of personalized content, such as an instant message from a friend.

Tile notifications—Used by applications that are not

currently running with an at-a-glance characteristic, giving you a quick preview of the subject line of your latest email or the current weather conditions.

Badge notifications—A specialized type of tile notification

(shown on the Start screen tile) using glyphs to indicate the number of applications that have updates available or the status of a running application.

Raw notifications—These run a background task on behalf

of an application while that application is not running in order to make available the latest content, such as an online newspaper.

Windows® Store

Although many applications will be pre-installed or built-in to your computer, you will also have the ability to download many other applications with a touch or the click of your mouse.

In the Windows thousands of apps, all grouped into easy to find categories.

Store you can search for and browse

Exploring Your Computer’s Features

Setting up for communications

To connect to the Internet you need:

❖ A browser or communications program ❖ An Internet Service Provider (ISP) or online service if you

plan to use the Internet

❖ A way to connect to the ISP (for example

Connect to the Internet

Wi-Fi

/broadband connection, etc.)

NOTE

Wireless connectivity and some features may require you to purchase additional software, external hardware or services. Availability of public wireless LAN access points may be limited.

Follow the steps below to set up your Wireless connection.

1 Move your pointer to the upper-right corner of the screen

or swipe in from the right edge. When the Windows charms appear, click or touch the

2 Click or touch the

Wi-Fi () icon.

Settings ( ) charm.

The Networks screen appears.

3 Select your network. 4 Click or touch

Connect.

5 Enter the network security key (if applicable). 6 Click or touch

Next.

Your computer should then be connected.

NOTE

To enable or disable wireless communication, use the

F12 key. For more information see “TOSHIBA Function

Keys” on page 137.

NOTE

When Airplane mode is OFF, the wireless indicator light

will be lit.

For help with common Wi-Fi

networking problems, see

“Wireless networking problems” on page 127.

Start Recording/Stop Recording button

Exploring Your Computer’s Features

Exploring audio features

Connecting your computer to a network

You can connect your computer to a network to increase its capabilities and functionality.

Accessing a network

For specific information about connecting to the network, consult your network administrator. Many hotels, airports, and offices offer Wi-Fi

access.

Exploring audio features

You can use your computer to record sounds using the computer’s internal microphones (available on certain models) or an optional external microphone. You can listen to sound files or audio CDs using the built-in speakers, headphones, or external speakers.

Recording sounds

You may record sounds using the computer’s internal microphones (available on certain models) or by connecting an optional external microphone.

Using a microphone

1 If you want to use an external microphone, connect it to

the computer.

2 From the Start screen begin typing

and click or touch your selection. If you are in the Desktop, move your pointer to the upper-right corner of the screen or swipe in from the right edge. When the Windows charm and, in the Search field, type

charms appear click or touch the Search ()

Sound Recorder

Sound Recorder.

(Sample Image) Sound Recorder screen

3 Click or touch the Start Recording button. 4 Speak normally into the microphone.

Exploring Your Computer’s Features

Exploring audio features

5 When you have finished recording, click or touch the

Stop Recording button.

The

Save As dialog box appears.

6 To save the file, type a file name, and then click or touch

Save.

Using external speakers or headphones

Your computer is equipped with a full stereo sound system with internal speakers. Instead of using the internal speakers, you can connect headphones or a pair of external stereo speakers.

Before putting on headphones to listen, turn the volume down. Do not set the volume too high when using headphones. Continuous exposure to loud sound can harm your hearing.

TECHNICAL NOTE: When using amplified speakers, use speakers that require an external power source. Other types of speakers will be inadequate to produce sound from the computer.

To play back sound files through external speakers or headphones:

1 Locate the headphone jack on the computer. 2 Using any necessary adapters, plug the cable from the

headphones or external speakers into the headphone

jack.

The headphone jack requires a 16-ohm stereo mini

connector. To adjust the volume:

❖ For external speakers, use the volume controls on each

speaker.

❖ For headphones, use the computer’s volume control.

Exploring Your Computer’s Features

Using the Web Camera

Your computer may come with a built-in Web Camera. With this Web Camera you can do the following:

❖ Take pictures and record videos with your computer ❖ Chat with others and have them see you while using

instant messaging (IM) programs

❖ Have video conference calls

NOTE

Depending on your computer model, the process of sending email, taking pictures or recording video messages may vary.

To access the Web Camera, on the Start screen click or touch the glows when the Web Camera is active.

NOTE

To email, instant message or video conference, you must be connected to the Internet.

Camera tile. The Web Camera indicator light

When the Web camera is not active the indicator light is off.

Using the Memory card reader

The Memory card reader supports the use of Secure Digital™ (SD™), Mini SD™, Micro SD™, SDHC, SDXC, or MultiMediaCard with a variety of digital products: digital music players, cellular phones, PDAs, digital cameras, digital video camcorders, etc.

To use a micro or mini SD™ Card, an SD™ adapter is required.

(MMC®) media. These media can be used

The Memory card reader may also support other types of media.

NOTE

Do not use the Copy Disk function for this type of media. To copy data from one media to another, use the dragand-drop feature of the Windows® operating system.

Exploring Your Computer’s Features

Using the Memory card reader

Inserting memory media

NOTE

The following instructions apply to all types of supported media devices.

1 Turn the media so that the contacts (metal areas) are

2 Push the media into the adapter until it stops.

To locate your Memory card reader, please refer to your Quick Start document.

face down.

(Sample Illustration) Inserting memory media

When inserting memory media, do not touch the metal contacts. You could expose the storage area to static electricity, which can destroy data.

NOTE

Always remove memory media when not in use.

Removing memory media

1 If you are not currently on the Desktop, choose the

Desktop tile on the Start screen, otherwise skip to step 2.

2 Prepare the card for removal by clicking on or touching

the

Show hidden icons button ( ), if necessary, in the

notification area and then selecting the

Hardware and Eject Media icon.

Safely Remove

Exploring Your Computer’s Features

Using the Memory card reader

3 Highlight, and then click or touch the item you would like

to eject. If the system is unable to prepare the media for safe

removal, a message will tell you to try again later. If the media can be removed now, the system displays

to Remove Hardware.

If the computer has a spring-loaded adapter slot, see step 4; otherwise, skip to step 5.

4 Gently press the card inward to release it.

The card pops out slightly.

5 Grasp the card and pull it straight out.

Safe

(Sample Illustration) Removing memory media

Do not remove memory media while data is being written or read. Even when the Windows disappears, writing to the media might still be in progress and your data could be destroyed. Wait for the indicator light to go out.

message “copying...”

Chapter 5

Utilities

Your computer includes several utilities designed to help you to reconfigure your system to best meet your individual needs. Together, these allow you to ascertain certain system details, set additional options, or change default options. These utilities are described in this chapter.

NOTE

❖ eco Utility ❖ Supervisor password ❖ User password ❖ System Settings ❖ Sleep Utilities ❖ Function Key ❖ Recovery Media Creator ❖ Service Station ❖ TOSHIBA Application Installer

The utilities described in this chapter, and the icons shown in the sample images are applicable only if the related utility is available on your system.

Utilities

eco Utility

eco Utility®

The eco Utility® monitors your power savings from using the eco power plan by tracking real-time power consumption and accumulated savings over time.

To access the eco Utility

1 From the Start screen begin typing 2 Click or touch eco Utility.

The eco Utility

window appears.

eco Utility.

(Sample Image) eco Utility® window

3 To activate the eco power plan, select eco Mode on the

left side.

4 Click or touch the 5 Click or touch

eco Mode button.

Close.

For more information on the eco power plan and utility, click or touch the

Help button at the bottom of the window.

Password Utility

Setting a password lets you walk away from your computer while providing additional protection for your files. When you set a password, you must enter the password before you can work on your computer again.

TOSHIBA supports different types of passwords on your computer:

❖ A supervisor password—Prohibits unauthorized users

from accessing certain functions such as System Settings. This is useful if more than one person uses the computer.

❖ A user password—Prevents unauthorized users from

starting the computer.

When setting up passwords, keep the following in mind:

❖ The supervisor password must be set before the user

password, or the user password must be deleted and then re-entered after the supervisor password is set.

❖ The user password can be set up under the supervisor

password.

Utilities

Password Utility

Using a supervisor password

A supervisor password prevents other users from changing hardware configuration options.

Setting a supervisor password

If you choose to set a supervisor or user password, TOSHIBA strongly recommends that you save your password in a location where you can later access it should you not remember it.

TOSHIBA is not responsible for any losses that may occur to you, your organization or others as a result of the inability to access your computer.

100

Utilities

Password Utility

To set a supervisor password:

1 To access Supervisor Password from the Start screen

begin typing

2 Click or touch

Password Utility.

(Sample Image) Supervisor Password tab

3 Click or touch Supervisor Password. 4 Click or touch 5 Enter your password, and then enter it again to verify. 6 Click or touch

NOTE

7 Click or touch

NOTE

8 Click or touch 9 Click or touch

Under User Policy, this option may or may not ask for password verification.

Password Utility will suggest “memo.txt” for the text file name. If you have saved a password previously, using the same name may overwrite your password text file with the new password. By using a different name, you can prevent overwriting your previously stored passwords.

Set.

OK to save your password as a text file.

Save. OK.

Toshiba Satellite E40-A, /Satellite Pro E40-A User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

Contents

Introduction

This guide

Safety icons

Other icons used

Documentation

Your computer’s features and specifications

Service options

Selecting a place to work

Setting up a work environment

Keeping yourself comfortable

Computer user comfort recommendations

Good Working Posture

Using the notebook with an external keyboard, mouse or monitor

Typing s tyle

Taking breaks and varying tasks

Mobile computing tips

Transporting the notebook

Seeking additional help

Check list

Precautions

Setting up your computer

Important information on your computer’s cooling fan

Connecting to a power source

Charging the main battery

Using the computer for the first time

Initial setup

Registering your computer with Toshiba

Setting up your software

To Shut down your computer

To Restart your computer

To place your computer in Sleep mode

Adding optional external devices

Adding memory (optional)

Recovering the Internal Storage Drive

Creating recovery media

Restoring from recovery media

Refresh your PC (with user’s data)

Reset your PC

Installing drivers and applications

Using the touch pad

Adjusting touch pad settings

Disabling or enabling the touch pad

Connecting an external device

Using external display devices

Selecting video cables

Connecting an HDMI™-compatible television or display device

Connecting an external monitor or projector

Directing the display output when you turn on the computer

Adjusting the quality of the external display

Customizing your computer’s settings

Caring for your computer

Cleaning the computer

Moving the computer

Computing tips

Using the keyboard

Function keys

Special Windows® keys

Backlit keyboard

Touch screen

Touch screen navigation

Mouse properties

Starting an app

Starting an app from the Start screen

Saving your work

Backing up your work

Toshiba’s online resources

Toshiba’s energy-saver design

Running the computer on battery power

Battery Notice

Power management

Charging batteries

Charging the main battery

Charging the RTC battery

Monitoring battery power

Determining remaining battery power