Toshiba Satellite A660 Series, Satellite A660D Series, Satellite Pro A660D Series, Satellite Pro A660 Series User Manual

User’s Manual

Satellite A660/A660D
Satellite Pro A660/A660D Series

Table of Contents

Copyright. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi

Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi

Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi

FCC information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii

EU Declaration of Conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii

REACH - Compliance Statement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix

Following information is only for Turkey: . . . . . . . . . . . . . . . . . . . . . . ix

Canadian regulatory information (Canada only) . . . . . . . . . . . . . . . . . . x

Modem warning notice. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x

Japan regulations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi

Instructions for IC CS-03 certified equipment . . . . . . . . . . . . . . . . . . xiii

Notes for Users in Australia and New Zealand . . . . . . . . . . . . . . . . . xiv

Following information is only valid for EU-member States:. . . . . . . xvii

Disposing of the computer and the computer's batteries . . . . . . . xviii

Optical disc drive safety instructions. . . . . . . . . . . . . . . . . . . . . . . . . xix

International precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxi

Preface

Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxii

General Precautions

Provide adequate ventilation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxv

Creating a computer-friendly environment . . . . . . . . . . . . . . . . . . . xxvi

Stress injury . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxvi

Heat injury . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxvi

Pressure or impact damage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxvii

ExpressCard overheating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxvii

Mobile phones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxvii

Instruction Manual for Safety and Comfort . . . . . . . . . . . . . . . . . . . xxvii

Chapter 1 Getting Started

Equipment checklist. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3

System Recovery Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-13

User’s Manual ii

Satellite A660/A660D, Satellite Pro A660/A660D Series

System Recovery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-14

Chapter 2 The Grand Tour

Front with the display closed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

Right side . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

Left side. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4

Back . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6

Underside . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7

Front with the display open. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9

Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12

Optical disc drives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-14

Remote Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-18

Using the Remote Controller. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-24

Installing/Removing batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-25

AC adaptor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-30

Chapter 3 Hardware, Utilities and Options

Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

Special features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9

TOSHIBA Value Added Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-12

Utilities and Applications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-14

Optional devices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-19

Bridge media slot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-21

Optional accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-41

Chapter 4 Operating Basics

Using the Touch Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1

Touch Pad Gesture. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2

Using the Fingerprint Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2

Web Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9

Using TOSHIBA Web Camera Application . . . . . . . . . . . . . . . . . . . . 4-10

Using the TOSHIBA Face Recognition . . . . . . . . . . . . . . . . . . . . . . . 4-11

Using optical disc drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-14

Writing CD/DVD/BD on DVD Super Multi drive or

BD-Writer drive or BD-Combo drive . . . . . . . . . . . . . . . . . . . . . . . . . 4-20

Using WinDVD BD for TOSHIBA . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-33

Media care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-34

Sound System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-36

Realtek HD Audio Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-36

Modem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-39

Wireless communications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-42

LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-45

Computer Handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-47

Using the Hard Disk Drive (HDD) Protection . . . . . . . . . . . . . . . . . . 4-48

Using the TOSHIBA Sleep Utility. . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-50

Heat dispersal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-53

User’s Manual iii

Satellite A660/A660D, Satellite Pro A660/A660D Series

Chapter 5 The Keyboard

Typewriter keys. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1

Function keys: F1 … F12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2

Soft keys: FN key combinations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2

Hot keys. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3

Windows special keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5

Generating ASCII characters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5

Chapter 6 Power and Power-Up Modes

Power conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1

Monitoring of power condition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2

Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3

TOSHIBA Password Utility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-12

Power-up modes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-13

Panel power on/off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-13

System automatic Sleep/Hibernation . . . . . . . . . . . . . . . . . . . . . . . . 6-14

Chapter 7 HW Setup

Accessing HW Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1

HW Setup window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1

Chapter 8 Troubleshooting

Problem solving process. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1

Hardware and system checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-3

TOSHIBA support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-26

Appendix A Specifications

Physical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1

Environmental Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1

Appendix B Display Controller and Video mode

Display controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-1

Video mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-1

Appendix C Wireless LAN

Card Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-1

Radio Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-2

Supported Frequency Sub-bands. . . . . . . . . . . . . . . . . . . . . . . . . . . . C-3

Appendix D Bluetooth wireless technology Interoperability

Bluetooth wireless technology and your Health . . . . . . . . . . . . . . . . D-2

Regulatory statements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-3

Using Bluetooth Adaptor from TOSHIBA equipment in Japan . . . . D-4

Appendix E AC Power Cord and Connectors

Certification agencies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-1

Appendix F TOSHIBA PC Health Monitor

Starting the TOSHIBA PC Health Monitor. . . . . . . . . . . . . . . . . . . . . . F-2

User’s Manual iv

Appendix G Legal Footnotes

Non-applicable Icons*1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-1

CPU*2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-1

Memory (Main System)*3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-2

Battery Life*4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-3

Hard Disk Drive (HDD) Capacity*5 . . . . . . . . . . . . . . . . . . . . . . . . . . . G-3

LCD*6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-3

Graphics Processor Unit ("GPU")*7 . . . . . . . . . . . . . . . . . . . . . . . . . . G-3

Wireless LAN*8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-4

Copy Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-4

Glossary

Index

Satellite A660/A660D, Satellite Pro A660/A660D Series

User’s Manual v

Copyright

Satellite A660/A660D, Satellite Pro A660/A660D Series

© 2010 by TOSHIBA Corporation. All rights reserved. Under the copyright
laws, this manual cannot be reproduced in any form without the prior
written permission of TOSHIBA. No patent liability is assumed, with respect
to the use of the information contained herein.

TOSHIBA Satellite A660/A660D, Satellite Pro A660/A660D Series Portable
Personal Computer User’s Manual

First edition June 2010
Copyright authority for music, movies, computer programs, databases and

other intellectual property covered by copyright laws belongs to the author
or to the copyright owner. Copyrighted material can be reproduced only for
personal use or use within the home. Any other use beyond that stipulated
above (including conversion to digital format, alteration, transfer of copied
material and distribution on a network) without the permission of the
copyright owner is a violation of copyright or author's rights and is subject to
civil damages or criminal action. Please comply with copyright laws in
making any reproduction from this manual.

Disclaimer

This manual has been validated and reviewed for accuracy. The
instructions and descriptions it contains are accurate for the TOSHIBA
Satellite A660/A660D, Satellite Pro A660/A660D Series Portable Personal
Computer at the time of this manual’s production. However, succeeding
computers and manuals are subject to change without notice. TOSHIBA
assumes no liability for damages incurred directly or indirectly from errors,
omissions or discrepancies between the computer and the manual.

Trademarks

IBM is a registered trademark and IBM PC is a trademark of International
Business Machines Corporation.

Intel, Intel SpeedStep, Intel Core and Centrino are trademarks or registered
trademarks of Intel Corporation.

Windows, Microsoft and Windows logo are registered trademarks of
Microsoft Corporation.

Bluetooth is a trademark owned by its proprietor and used by TOSHIBA
under license.

Photo CD is a trademark of Eastman Kodak Company.
Memory Stick, Memory Stick PRO, Memory Stick PRO Duo and i.LINK are

trademarks or registered trademarks of Sony Corporation.
ConfigFree is a trademark of Toshiba Corporation.
Wi-Fi is a registered trademark of the Wi-Fi Alliance.
Secure Digital and SD are trademarks of SD Card Association.
MultiMediaCard and MMC are trademarks of MultiMediaCard Association.

User’s Manual vi

xD-Picture Card is a trademark of FUJIFILM Corporation.
Manufactured under license from Dolby Laboratories. Dolby and the

double-D symbol are trademarks of Dolby Laboratories.
Labelflash is a trademark of YAMAHA CORPORATION.
Other trademarks and registered trademarks not listed above may be used

in this manual.

FCC information

FCC notice "Declaration of Conformity Information"

This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

Satellite A660/A660D, Satellite Pro A660/A660D Series

■ Reorient or relocate the receiving antenna.

■ Increase the separation between the equipment and receiver.

■ Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

■ Consult the dealer or an experienced radio/TV technician for help.

Only peripherals complying with the FCC class B limits may be attached to
this equipment. Operation with non-compliant peripherals or peripherals
not recommended by TOSHIBA is likely to result in interference to radio
and TV reception. Shielded cables must be used between the external
devices and the computer’s external monitor port, Universal Serial Bus
(USB 2.0) ports, eSATA/USB combo port, Mini DisplayPort, serial port and
microphone jack. Changes or modifications made to this equipment, not
expressly approved by TOSHIBA or parties authorized by TOSHIBA could
void the user’s authority to operate the equipment.

FCC conditions

This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including
interference that may cause undesired operation.

User’s Manual vii

Satellite A660/A660D, Satellite Pro A660/A660D Series

Contact

Address: TOSHIBA America Information Systems, Inc.

9740 Irvine Boulevard
Irvine, California 92618-1697

Telephone: [phone]

EU Declaration of Conformity

This product is carrying the CE-Mark in accordance with the related
European Directives. Responsible for CE-Marking is TOSHIBA Europe
GmbH, Hammfelddamm 8, 41460 Neuss, Germany. The complete and
official EU Declaration of Conformity can be found on TOSHIBA’s web site
http://epps.toshiba-teg.com on the Internet.

CE compliance

This product is labelled with the CE Mark in accordance with the related
European Directives, notably Electromagnetic Compatibility Directive
2004/108/EC for the notebook and the electronic accessories including the
supplied power adapter, the Radio Equipment and Telecommunications
Terminal Equipment Directive 1999/5/EC in case of implemented
telecommunication accessories and the Low Voltage Directive 2006/95/EC
for the supplied power adapter. Furthermore the product complies with the
Ecodesign Directive 2009/125/EC (ErP) and its related implementing
measures.

This product and the original options are designed to observe the related
EMC (Electromagnetic Compatibility) and safety standards. However,
TOSHIBA cannot guarantee that this product still observes these EMC
standards if options or cables not produced by TOSHIBA are connected or
implemented. In this case the persons who have connected/implemented
those options/cables have to provide assurance that the system (PC plus
options/cables) still fulfils the required standards. To avoid general EMC
problems, the following guidance should be noted:

■ Only CE marked options should be connected/implemented

■ Only best shielded cables should be connected

Working environment

This product was designed to fulfil the EMC (Electromagnetic Compatibility)
requirements to be observed for so-called "Residential, commercial and
light industry environments". TOSHIBA do not approve the use of this
product in working environments other than the above mentioned
"Residential, commercial and light industry environments".

User’s Manual viii

Satellite A660/A660D, Satellite Pro A660/A660D Series

For example, the following environments are not approved:

■ Industrial Environments (e.g. environments where a mains voltage of

380 V three-phase is used)

■ Medical Environments

■ Automotive Environments

■ Aircraft Environments

Any consequences resulting from the use of this product in working
environments that are not approved are not the responsibility of TOSHIBA.

The consequences of the use of this product in non-approved working
environments may be:

■ Interference with other devices or machines in the near surrounding

area.

■ Malfunction of, or data loss from, this product caused by disturbances

generated by other devices or machines in the near surrounding area.

Therefore TOSHIBA strongly recommend that the electromagnetic
compatibility of this product should be suitably tested in all non-approved
working environments before use. In the case of automobiles or aircraft, the
manufacturer or airline respectively should be asked for permission before
use of this product.

Furthermore, for general safety reasons, the use of this product in
environments with explosive atmospheres is not permitted.

REACH - Compliance Statement

The new European Union (EU) chemical regulation, REACH (Registration,
Evaluation, Authorization and Restriction of Chemicals), entered into force
on 1 June 2007. Toshiba will meet all REACH requirements and is
committed to provide our customers with information about the chemical
substances in our products according to REACH regulation. Please consult
the following website www.toshiba-europe.com/computers/info/reach
information about the presence in our articles of substances included on
the candidate list according to article 59(1) of Regulation (EC) No
1907/2006 ("REACH") in a concentration above 0.1 % weight by weight.

Following information is only for Turkey:

■ Compliant with EEE Regulations: Toshiba meets all requirements of

Turkish regulation 26891 "Restriction of the use of certain hazardous
substances in electrical and electronic equipment".

for

■ The number of possible pixel failures of your display is defined

according to ISO 13406-2 standards. If the number of pixel failures is
less than this standard, they will not be counted as defect or failure.

■ Battery is a consumption product, since the battery time depends on the

usage of your computer. If the battery can not be charged at all, then it
is a defect or failure. The changes in battery time is not a defect or
failure.

User’s Manual ix

Satellite A660/A660D, Satellite Pro A660/A660D Series

Canadian regulatory information (Canada only)

This digital apparatus does not exceed the Class B limits for radio noise
emissions from digital apparatus as set out in the Radio Interference
Regulation of the Canadian Department of Communications.

Note that Canadian Department of Communications (DOC) regulations
provide, that changes or modifications not expressly approved by
TOSHIBA Corporation could void your authority to operate this equipment.

This Class B digital apparatus meets all requirements of the Canadian
Interference-Causng Equipment Regulations.

Cet appareil numérique de la class B respecte toutes les exgences du
Règlement sur le matériel brouileur du Canada.

Modem warning notice

This information is applicable to the models equipped with a built-in
modem.

Conformity Statement

The equipment has been approved to [Commission Decision "CTR21"] for
pan-European single terminal connection to the Public Switched Telephone
Network (PSTN).

However, due to differences between the individual PSTNs provided in
different countries/regions the approval does not, of itself, give an
unconditional assurance of successful operation on every PSTN network
termination point.

In the event of problems, you should contact your equipment supplier in the
first instance.

Network Compatibility Statement

This product is designed to work with, and is compatible with the following
networks. It has been tested to and found to conform with the additional
requirements conditional in EG 201 121.

Germany ATAAB AN005,AN006,AN007,AN009,AN010

and DE03,04,05,08,09,12,14,17
Greece ATAAB AN005,AN006 and GR01,02,03,04
Portugal ATAAB AN001,005,006,007,011 and

P03,04,08,10
Spain ATAAB AN005,007,012, and ES01
Switzerland ATAAB AN002
All other countries/regions ATAAB AN003,004

Specific switch settings or software setup are required for each network,
please refer to the relevant sections of the user guide for more details.

User’s Manual x

The hookflash (timed break register recall) function is subject to separate
national type approvals. It has not been tested for conformity to national
type regulations, and no guarantee of successful operation of that specific
function on specific national networks can be given.

Japan regulations

Region selection

If you are using the computer in Japan, technical regulations described in
the Telecommunications Business Law require that you select the Japan
region mode. It is illegal to use the modem in Japan with any other
selection.

Redial

Up to two redial attempts can be made. If more than two redial attempts are
made, the modem will return Black Listed. If you are experiencing
problems with the Black Listed code, set the interval between redials at one
minute or longer.

Satellite A660/A660D, Satellite Pro A660/A660D Series

Japan’s Telecommunications Business Law permits up to two redials on
analogue telephones, but the redials must be made within a total of three
minutes.

The internal modem is approved by Japan Approvals Institute for
Telecommunications Equipment.

A05-0413001
A05-5016201

This label is located on the module.

User’s Manual xi

Satellite A660/A660D, Satellite Pro A660/A660D Series

Pursuant to FCC CFR 47, Part 68:

When you are ready to install or use the modem, call your local telephone
company and give them the following information:

■ The telephone number of the line to which you will connect the modem

■ The registration number that is located on the device

US: AGSMD01BDELPHI
CXSMM01BRD02D330
The FCC registration number of the modem will be found on either the

device which is to be installed, or, if already installed, on the bottom of
the computer outside of the main system label.

■ The Ringer Equivalence Number (REN) of the modem, which can vary.

For the REN of your modem, refer to your modem’s label.

The modem connects to the telephone line by means of a standard jack
called the USOC RJ11C.

Type of service

Your modem is designed to be used on standard-device telephone lines.
Connection to telephone company-provided coin service (central office
implemented systems) is prohibited. Connection to party lines service is
subject to state tariffs. If you have any questions about your telephone line,
such as how many pieces of equipment you can connect to it, the
telephone company will provide this information upon request.

Telephone company procedures

The goal of the telephone company is to provide you with the best service it
can. In order to do this, it may occasionally be necessary for them to make
changes in their equipment, operations, or procedures. If these changes
might affect your service or the operation of your equipment, the telephone
company will give you notice in writing to allow you to make any changes
necessary to maintain uninterrupted service.

If problems arise

If any of your telephone equipment is not operating properly, you should
immediately remove it from your telephone line, as it may cause harm to
the telephone network. If the telephone company notes a problem, they
may temporarily discontinue service. When practical, they will notify you in
advance of this disconnection. If advance notice is not feasible, you will be
notified as soon as possible. When you are notified, you will be given the
opportunity to correct the problem and informed of your right to file a
complaint with the FCC. In the event repairs are ever needed on your
modem, they should be performed by TOSHIBA Corporation or an
authorized representative of TOSHIBA Corporation.

User’s Manual xii

Disconnection

If you should ever decide to permanently disconnect your modem from its
present line, please call the telephone company and let them know of this
change.

Fax branding

The Telephone Consumer Protection Act of 1991 makes it unlawful for any
person to use a computer or other electronic device to send any message
via a telephone fax machine unless such message clearly contains in a
margin at the top or bottom of each transmitted page or on the first page of
the transmission, the date and time it is sent and an identification of the
business, other entity or individual sending the message and the telephone
number of the sending machine or such business, other entity or individual.
In order to program this information into your fax modem, you should
complete the setup of your fax software before sending messages.

Use only No. 26AWG or larger modular cable.

Satellite A660/A660D, Satellite Pro A660/A660D Series

Instructions for IC CS-03 certified equipment

1. The Industry Canada label identifies certified equipment. This

certification means that the equipment meets certain
telecommunications network protective, operational and safety
requirements as prescribed in the appropriate Terminal Equipment
Technical Requirements document(s). The Department does not
guarantee the equipment will operate to the user’s satisfaction.

Before installing this equipment, users should ensure that it is
permissible to be connected to the facilities of the local
telecommunications company. The equipment must also be installed
using an acceptable method of connection.

The customer should be aware that compliance with the above
conditions may not prevent degradation of service in some situations.
Repairs to certified equipment should be coordinated by a
representative designated by the supplier. Any repairs or alterations
made by the user to this equipment, or equipment malfunctions, may
give the telecommunications company cause to request the user to
disconnect the equipment.

Users should ensure for their own protection that the electrical ground
connections of the power utility, telephone lines and internal metallic
water pipe systems, if present, are connected together. This precaution
may be particularly important in rural areas.

Users should not attempt to make such connections themselves, but
should contact the appropriate electric inspection authority, or electrician,
as appropriate.

User’s Manual xiii

Satellite A660/A660D, Satellite Pro A660/A660D Series

2. The user manual of analog equipment must contain the equipment’s

Ringer Equivalence Number (REN) and an explanation notice similar to
the following:

The Ringer Equivalence Number (REN) of the modem, which can vary.
For the REN of your modem, refer to your modem’s label.

The Ringer Equivalence Number (REN) assigned to each terminal device
provides an indication of the maximum number of terminals allowed to be
connected to a telephone interface. The termination on an interface may
consist of any combination of devices subject only to the requirement that
the sum of the Ringer Equivalence Numbers of all the devices does not
exceed 5.

3. The standard connecting arrangement (telephone jack type) for this

equipment is jack type(s): USOC RJ11C.
The IC registration number of the modem is shown below.

Canada: 4005B-DELPHI

3652B-RD02D330

Notes for Users in Australia and New Zealand

Modem warning notice for Australia

Modems connected to the Australian telecoms network must have a valid
Austel permit. This modem has been designed to specifically configure to
ensure compliance with Austel standards when the country/region selection
is set to Australia. The use of other country/region setting while the modem
is attached to the Australian PSTN would result in you modem being
operated in a non-compliant manner. To verify that the country/region is
correctly set, enter the command ATI which displays the currently active
setting.

To set the country/region permanently to Australia, enter the following
command sequence:

AT%TE=1
ATS133=1
AT&F
AT&W
AT%TE=0
ATZ

Failure to set the modem to the Australia country/region setting as shown
above will result in the modem being operated in a non-compliant manner.
Consequently, there would be no permit in force for this equipment and the
Telecoms Act 1991 prescribes a penalty of $12,000 for the connection of
non-permitted equipment.

User’s Manual xiv

Satellite A660/A660D, Satellite Pro A660/A660D Series

Notes for use of this device in New Zealand

■ The grant of a Telepermit for a device in no way indicates Telecom

acceptance of responsibility for the correct operation of that device
under all operating conditions. In particular the higher speeds at which
this modem is capable of operating depend on a specific network
implementation which is only one of many ways of delivering high
quality voice telephony to customers. Failure to operate should not be
reported as a fault to Telecom.

■ In addition to satisfactory line conditions a modem can only work

properly if:
a/ it is compatible with the modem at the other end of the call and.
b/ the application using the modem is compatible with the application

at the other end of the call - e.g., accessing the Internet requires
suitable software in addition to a modem.

■ This equipment shall not be used in any manner which could constitute

a nuisance to other Telecom customers.

■ Some parameters required for compliance with Telecom’s PTC

Specifications are dependent on the equipment (PC) associated with
this modem. The associated equipment shall be set to operate within
the following limits for compliance with Telecom Specifications:

a/ There shall be no more than 10 call attempts to the same number

within any 30 minute period for any single manual call initiation, and

b/ The equipment shall go on-hook for a period of not less than 30

seconds between the end of one attempt and the beginning of the
next.

c/ Automatic calls to different numbers shall be not less than 5

seconds apart.

■ Immediately disconnect this equipment should it become physically

damaged, and arrange for its disposal or repair.

■ The correct settings for use with this modem in New Zealand are as

follows:

ATB0 (CCITT operation)
AT&G2 (1800 Hz guard tone)
AT&P1 (Decadic dialing make-break ratio =33%/67%)
ATS0=0 (not auto answer)
ATS6=4 (Blind dial delay)
ATS7=less than 90 (Time to wait to carrier after dialing)
ATS10=less than 150 (loss of carrier to hangup delay, factory

default of 15 recommended)
ATS11=90 (DTMF dialing on/off duration=90 ms)
ATX2 (Dial tone detect, but not (U.S.A.) call progress detect)

User’s Manual xv

Satellite A660/A660D, Satellite Pro A660/A660D Series

■ When used in the Auto Answer mode, the S0 register must be set with a

value of 3 or 4. This ensures:
a/ A person calling your modem will hear a short burst of ringing before

the modem answers. This confirms that the call has been
successfully switched through the network.

b/ Caller identification information (which occurs between the first and

second ring cadences) is not destroyed.

■ The preferred method of dialing is to use DTMF tones (ATDT...) as this

is faster and more reliable than pulse (decadic) dialing. If for some
reason you must use decadic dialing, your communications program
must be set up to record numbers using the following translation table
as this modem does not implement the New Zealand “Reverse Dialing”
standard.

Number to be dialed: 0 1 2 3 4 5 6 7 8 9
Number to program into computer: 0 9 8 7 6 5 4 3 2 1
Note that where DTMF dialing is used, the numbers should be

entered normally.

■ The transmit level from this device is set at a fixed level and because of

this there may be circumstances where the performance is less than
optimal. Before reporting such occurrences as faults, please check the
line with a standard Telepermitted telephone, and only report a fault if
the phone performance is impaired.

■ It is recommended that this equipment be disconnected from the

Telecom line during electrical storms.

■ When relocating the equipment, always disconnect the Telecom line

connection before the power connection, and reconnect the power first.

■ This equipment may not be compatible with Telecom Distinctive Alert

cadences and services such as FaxAbility.

NOTE THAT FAULT CALLOUTS CAUSED BY ANY OF THE ABOVE
CAUSES MAY INCUR A CHARGE FROM TELECOM

General conditions

As required by PTC 100, please ensure that this office is advised of any
changes to the specifications of these products which might affect
compliance with the relevant PTC Specifications.

The grant of this Telepermit is specific to the above products with the
marketing description as stated on the Telepermit label artwork. The
Telepermit may not be assigned to other parties or other products without
Telecom approval.

A Telepermit artwork for each device is included from which you may
prepare any number of Telepermit labels subject to the general instructions
on format, size and color on the attached sheet.

The Telepermit label must be displayed on the product at all times as proof
to purchasers and service personnel that the product is able to be
legitimately connected to the Telecom network.

The Telepermit label may also be shown on the packaging of the product
and in the sales literature, as required in PTC 100.

User’s Manual xvi

Satellite A660/A660D, Satellite Pro A660/A660D Series

The charge for a Telepermit assessment is $337.50. An additional charge
of $337.50 is payable where an assessment is based on reports against
non-Telecom New Zealand Specifications. $112.50 is charged for each
variation when submitted at the same time as the original.

An invoice for $NZ1237.50 will be sent under separate cover.

Following information is only valid for EU-member States:

Disposal of products

The crossed out wheeled dust bin symbol indicates that products must be
collected and disposed of separately from household waste. Integrated
batteries and accumulators can be disposed of with the product. They will
be separated at the recycling centres.

The black bar indicates that the product was placed on the market after
August 13, 2005.

By participating in separate collection of products and batteries, you will
help to assure the proper disposal of products and batteries and thus help
to prevent potential negative consequences for the environment and
human health.

For more detailed information about the collection and recycling
programmes available in your country, please visit our website
(http://eu.computers.toshiba-europe.com) or contact your local city office or
the shop where you purchased the product.

Disposal of batteries and/or accumulators

The crossed out wheeled dust bin symbol indicates that batteries and/or
accumulators must be collected and disposed of separately from
household waste.

If the battery or accumulator contains more than the specified values of
lead (Pb), mercury (Hg), and/or cadmium (Cd) defined in the Battery
Directive (2006/66/EC), then the chemical symbols for lead (Pb), mercury
(Hg) and/or cadmium (Cd) will appear below the crossed out wheeled dust
bin symbol.

By participating in separate collection of batteries, you will help to assure
the proper disposal of products and batteries and thus help to prevent
potential negative consequences for the environment and human health.

For more detailed information about the collection and recycling
programmes available in your country, please visit our website
(http://eu.computers.toshiba-europe.com) or contact your local city office or
the shop where you purchased the product.

These symbols may not stick depending on the country and region where
you purchased.

User’s Manual xvii

Satellite A660/A660D, Satellite Pro A660/A660D Series

Disposing of the computer and the computer's batteries

■ Discard this computer in accordance with applicable laws and

regulations. For further information, contact your local government.

■ This computer contains rechargeable batteries. After repeated use, the

batteries will finally lose their ability to hold a charge and you will need
to replace them. Under certain applicable laws and regulation, it may be
illegal to dispose of old batteries by placing them in the trash.

■ Please be kind to our shared environment. Check with your local

government authority for details regarding where to recycle old batteries
or how to dispose of them properly. Disposal of this material may be
regulated due to environmental considerations. For disposal, reuse or
recycling information, please contact your local government.

User’s Manual xviii

Satellite A660/A660D, Satellite Pro A660/A660D Series

Optical disc drive safety instructions

TEAC

DVD Super Multi with Double Layer Recording DV-W28S

■ The DVD Super Multi drive model employs a laser system. To ensure

proper use of this product, please read this instruction manual carefully
and retain for future reference. Should the unit ever require
maintenance, contact an authorized service location.

■ Use of controls, adjustments or the performance of procedures other

than those specified may result in hazardous radiation exposure.

■ To prevent direct exposure to the laser beam, do not try to open the

enclosure.

User’s Manual xix

Satellite A660/A660D, Satellite Pro A660/A660D Series

Panasonic System Networks

■ DVD Super Multi UJ890

■ BD-Combo UJ141

■ BD-Writer UJ240

Panasonic System Networks Co., Ltd.

HITACHI-LG Data Storage, Inc.

■ DVD Super Multi GT30N/GT30F

Hitachi-LG Data Storage, Inc.
22-23,KAIGAN 3-CHOME,
MINATO-KU,TOKYO,108-0022
JAPAN

User’s Manual xx

International precautions

Satellite A660/A660D, Satellite Pro A660/A660D Series

CAUTION: This appliance contains a
laser system and is classified as a
“CLASS 1 LASER PRODUCT.” To use
this model properly, read the instruction
manual carefully and keep this manual
for your future reference. In case of any
trouble with this model, please contact
your nearest “AUTHORIZED service
station.” To prevent direct exposure to the
laser beam, do not try to open the
enclosure.

VORSICHT: Dieses Gerät enthält ein
Laser-System und ist als
“LASERSCHUTZKLASSE 1 PRODUKT”
klassifiziert. Für den richtigen Gebrauch
dieses Modells lesen Sie bitte die
Bedienungsanleitung sorgfältig durch
und bewahren diese bitte als Referenz
auf. Falls Probleme mit diesem Modell
auftreten, benachrichtigen Sie bitte die
nächste “autorisierte Service-Vertretung”.
Um einen direkten Kontakt mit dem
Laserstrahl zu vermeiden darf das Gerät
nicht geöffnet werden.

ADVARSEL: Denne mærking er anbragt
udvendigt på apparatet og indikerer, at
apparatet arbejder med laserstråler af
klasse 1, hviket betyder, at der anvendes
laserstrlier af svageste klasse, og at man
ikke på apparatets yderside kan bilve
udsat for utilladellg kraftig stråling.

APPARATET BOR KUN ÅBNES AF
FAGFOLK MED SÆRLIGT KENDSKAB
TIL APPARATER MED
LASERSTRÅLER!

Indvendigt i apparatet er anbragt den her
gengivne advarselsmækning, som
advarer imod at foretage sådanne
indgreb i apparatet, at man kan komme til
at udsatte sig for laserstråling.

User’s Manual xxi

Satellite A660/A660D, Satellite Pro A660/A660D Series

OBS! Apparaten innehåller
laserkomponent som avger laserstråining
överstigande gränsen för laserklass 1.

VAROITUS. Suojakoteloa si saa avata.
Laite sisältää laserdiodin, joka lähetää
näkymätöntä silmilie vaarallista
lasersäteilyä.

CAUTION: USE OF CONTROLS OR
ADJUSTMENTS OR PERFORMANCE
OF PROCEDURES OTHER THAN
THOSE SPECIFIED IN THE OWNER’S
MANUAL MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.

VORSICHT: DIE VERWENDUNG VON
ANDEREN STEURUNGEN ODER
EINSTELLUNGEN ODER DAS
DURCHFÜHREN VON ANDEREN
VORGÄNGEN ALS IN DER
BEDIENUNGSANLEITUNG
BESCHRIEBEN KÖNNEN
GEFÄHRLICHE
STRAHLENEXPOSITIONEN ZUR
FOLGE HABEN.

User’s Manual xxii

Preface

Congratulations on your purchase of the Satellite A660/Pro A660/
A660D/Pro A660D Series computer. This powerful notebook computer
provides excellent expansion capability, includes multimedia functionality,
and is designed to provide years of reliable, high-performance computing.

This manual tells how to set up and begin using your Satellite A660/A660D,
Satellite Pro A660/A660D Series computer. It also provides detailed
information on configuring your computer, basic operations and care, using
optional devices and troubleshooting.

If you are a new user of computers or if you’re new to portable computing,
first read over the Chapter 1, Getting Started and Chapter 3, Hardware,

Utilities and Options chapters to familiarize yourself with the computer’s

features, components and accessory devices. Then read Chapter 1,

Getting Started for step-by-step instructions on setting up your computer.

If you are an experienced computer user, please continue reading the
preface to learn how this manual is organized, then become acquainted
with this manual by browsing through its pages. Be sure to read the Special

features section in Chapter 3, Hardware, Utilities and Options to learn

about features that are uncommon or unique to this computer, as well as
the section on Chapter 7, HW Setup, to understand how to setup and
configure these features.

Read Chapter 3, Hardware, Utilities and Options if connecting optional
products or external devices.

Conventions

This manual uses the following formats to describe, identify, and highlight
terms and operating procedures.

Abbreviations

On first appearance, and whenever necessary for clarity, abbreviations are
enclosed in parentheses following their definition. For example: Read Only
Memory (ROM). Acronyms are also defined in the Glossary.

User’s Manual xxii

Icons

Icons identify ports, dials, and other parts of your computer. The indicator
panel also uses icons to identify the components it is providing information
on.

Keys

The keyboard keys are used in the text to describe many computer
operations. A distinctive typeface identifies the key top symbols as they
appear on the keyboard. For example, ENTER identifies the ENTER key.

Key operation

Some operations require you to simultaneously use two or more keys. We
identify such operations by the key top symbols separated by a plus sign
(+). For example, CTRL + C means you must hold down CTRL and at the
same time press C. If three keys are used, hold down the first two and at
the same time press the third.

Satellite A660/A660D, Satellite Pro A660/A660D Series

Display

S ABC

Messages

Messages are used in this manual to bring important information to your
attention. Each type of message is identified as shown below.

Pay attention! A caution informs you that improper use of equipment or
failure to follow instructions may cause data loss or damage your
equipment.

Please read. A note is a hint or advice that helps you make best use of
your equipment.

ABC

When procedures require an action such as
clicking an icon or entering text, the icon's name
or the text you are to type in is represented in the
typeface you see to the left.

Names of windows or icons or text generated by
the computer that appear on its display screen
are presented in the type face you see to the left.

Indicates a potentially hazardous situation, which could result in death or
serious injury, if you do not follow instructions.

User’s Manual xxiii

Terminology

This term is defined in this document as follows:

Start The word "Start" refers to the " " button in

Satellite A660/A660D, Satellite Pro A660/A660D Series

Windows 7.

HDD or Hard disk
drive

Some models are equipped with a "Solid State
Drive (SSD)" instead of a hard disk drive.

In this manual, the word "HDD" or "Hard disk
drive" also refers to the SSD unless otherwise
stated.

User’s Manual xxiv

General Precautions

TOSHIBA computers are designed to optimize safety, minimize strain and
withstand the rigors of portability. However, certain precautions should be
observed to further reduce the risk of personal injury or damage to the
computer.

Be certain to read the general precautions below and to note the cautions
included in the text of the manual.

Provide adequate ventilation

■ Always make sure your computer and AC adaptor have adequate

ventilation and are protected from overheating when the power is
turned on or when an AC adaptor is connected to a power outlet (even if
your computer is in Sleep Mode). In this condition, observe the
following:

■ Never cover your computer or AC adaptor with any object.

■ Never place your computer or AC adaptor near a heat source, such

as anelectric blanket or heater.

■ Never cover or block the air vents including those located at the

base of the computer.

■ Always operate your computer on a hard flat surface. Using your

computer on a carpet or other soft material can block the vents.

■ Always provide sufficient space around the computer.

■ Overheating your computer or AC adaptor could cause system failure,

computer or AC adaptor damage or a fire, possibly resulting in serious
injury.

User’s Manual xxv

Satellite A660/A660D, Satellite Pro A660/A660D Series

Creating a computer-friendly environment

Place the computer on a flat surface that is large enough for the computer
and any other items you are using, such as a printer.

Leave enough space around the computer and other equipment to provide
adequate ventilation. Otherwise, they may overheat.

To keep your computer in prime operating condition, protect your work area
from:

■ Dust, moisture, and direct sunlight.

■ Equipment that generates a strong electromagnetic field, such as

stereo speakers (other than speakers that are connected to the
computer) or speakerphones.

■ Rapid changes in temperature or humidity and sources of temperature

change such as air conditioner vents or heaters.

■ Extreme heat, cold, or humidity.

■ Liquids and corrosive chemicals.

Stress injury

Carefully read the Instruction Manual for Safety and Comfort. It contains
information on the prevention of stress injuries to your hands and wrists
that can be caused by extensive keyboard use. Instruction Manual for
Safety and Comfort also includes information on work space design,
posture and lighting that can help reduce physical stress.

Heat injury

■ Avoid prolonged physical contact with the computer. If the computer is

used for long periods, its surface can become very warm. While the
temperature will not feel hot to the touch, if you maintain physical
contact with the computer for a long time, for example if you rest the
computer on your lap or if you keep your hands on the palm rest, your
skin might suffer a low-heat injury.

■ If the computer has been used for a long time, avoid direct contact with

the metal plate supporting the various interface ports as this can
become hot.

■ The surface of the AC adaptor can become hot when in use but this

condition does not indicate a malfunction. If you need to transport the
AC adaptor, you should disconnect it and let it cool before moving it.

■ Do not lay the AC adaptor on a material that is sensitive to heat as the

material could become damaged.

User’s Manual xxvi

Pressure or impact damage

Do not apply heavy pressure to the computer or subject it to any form of
strong impact as this can damage the computer's components or otherwise
cause it to malfunction.

ExpressCard overheating

Some ExpressCards can become hot during prolonged use which may
result in errors or instability in the operation of the device in question. In
addition, you should also be careful when you remove an ExpressCard that
has been used for a long time.

Mobile phones

Please be aware that the use of mobile phones can interfere with the audio
system. The operation of the computer will not be impaired in any way, but
it is recommended that a minimum distance of 30cm is maintained between
the computer and a mobile phone that is in use.

Satellite A660/A660D, Satellite Pro A660/A660D Series

Instruction Manual for Safety and Comfort

All important information on the safe and proper use of this computer is
described in the enclosed Instruction Manual for Safety and Comfort. Be
sure to read it before using the computer.

User’s Manual xxvii

Getting Started

This chapter provides an equipment checklist, and basic information to start
using your computer.

Some of the features described in this manual may not function properly if
you use an operating system that was not pre-installed by TOSHIBA.

Equipment checklist

Carefully unpack your computer, taking care to save the box and packaging
materials for future use.

Chapter 1

Hardware

Check to make sure you have all the following items:

■ Satellite A660/A660D, Satellite Pro A660/A660D Series Portable

Personal Computer

■ AC adaptor and power cord (2-pin plug or 3-pin plug)

■ Battery pack

Documentation

■ Satellite A660/A660D, Satellite Pro A660/A660D Series User

Information Guide

■ Instruction Manual for Safety and Comfort

If any of the items are missing or damaged, contact your dealer
immediately.

User’s Manual 1-1

Software

The following Windows® operating system and utility software are pre­installed.

Getting Started

■ Windows 7

■ TOSHIBA Value Added Package

■ TOSHIBA Hardware Setup

■ TOSHIBA Flash Cards Support Utility

■ TOSHIBA Supervisor Password

■ TOSHIBA Recovery Media Creator

■ TOSHIBA DVD PLAYER

■ Corel Label@Once (preinstalled with some models)

■ Corel DVD MovieFactory for TOSHIBA (preinstalled with some

models)

■ WinDVD BD for TOSHIBA (preinstalled with some models)

■ TOSHIBA Assist

■ TOSHIBA ConfigFree™

■ TOSHIBA HDD Protection

■ TOSHIBA Disc Creator

■ TOSHIBA Face Recognition

■ TOSHIBA eco Utility

■ TOSHIBA PC Health Monitor

■ TOSHIBA Sleep Utility

■ TOSHIBA Fingerprint Utility

■ Online Manual

■ Satellite A660/A660D, Satellite Pro A660/A660D Series User's

Manual (This manual)

* You may not have all the softwares listed above depending on the

model you purchased.

User’s Manual 1-2

Getting Started

■ All users should be sure to read the section Starting up for the first time.

■ Be sure to read the enclosed Instruction Manual for Safety and Comfort

for information on the safe and proper use of this computer. It is
intended to help you be more comfortable and productive while using a
notebook computer. By following the recommendations in it you may
reduce your chance of developing a painful or disabling injury to your
hand, arms, shoulders or neck.

This section provides basic information to start using your computer. It
covers the following topics:

■ Connecting the AC adaptor

■ Opening the display

■ Turning on the power

■ Starting up for the first time

■ Turning off the power

Getting Started

■ Restarting the computer

■ System Recovery Options

■ Creating Recovery Media

■ Restoring the pre-installed software from the Recovery hard disk drive

■ Restoring the pre-installed software from your created Recovery Media

■ Use a virus-check program and make sure it is updated regularly.

■ Never format storage media without checking its content - formatting

destroys all stored data.

■ It is a good idea to periodically back up the internal hard disk drive or

other main storage device to external media. General storage media is
not durable or stable over long periods of time and under certain
conditions may result in data loss.

■ Before you install a device or application, save any data in memory to

the hard disk drive or other storage media. Failure to do so may result
in the loss of data.

User’s Manual 1-3

Connecting the AC adaptor

Attach the AC adaptor when you need to charge the battery or you want to
operate from AC power. It is also the fastest way to get started, because
the battery pack will need to be charged before you can operate from
battery power.

The AC adaptor can be connected to any power source supplying from 100
to 240 volts and 50 or 60 hertz. For details on using the AC adaptor to
charge the battery pack, refer to Chapter 6, Power and Power-Up Modes.

■ Always use the TOSHIBA AC adaptor that was included with your

computer, or use AC adaptors specified by TOSHIBA to avoid any risk
of fire or other damage to the computer. Use of an incompatible AC
adaptor could cause fire or damage to the computer possibly resulting
in serious injury. TOSHIBA assumes no liability for any damage caused
by use of an incompatible adaptor.

■ Never plug the AC adaptor into a power source that does not

correspond to both the voltage and the frequency specified on the
regulatory label of the unit. Failure to do so could result in a fire or
electric shock, possibly resulting in serious injury.

Getting Started

■ Always use or purchase power cables that comply with the legal

voltage and frequency specifications and requirements in the country of
use. Failure to do so could result in a fire or electric shock, possibly
resulting in serious injury.

■ The supplied power cord conforms to safety rules and regulations in

the region the product is bought and should not be used outside this
region. For use in other regions, please buy power cords that conform
to safety rules and regulations in the particular region.

■ Do not use a 3-pin to 2-pin conversion plug.

■ When you connect the AC adaptor to the computer, always follow the

steps in the exact order as described in the User’s Manual. Connecting
the power cable to a live electrical outlet should be the last step
otherwise the adaptor DC output plug could hold an electrical charge
and cause an electrical shock or minor bodily injury when touched. As
a general safety precaution, avoid touching any metal parts.

■ Never place your computer or AC adaptor on a wooden surface,

furniture, or any other surface that could be marred by exposure to heat
since the computer base and AC adaptor's surface increase in
temperature during normal use.

■ Always place your computer or AC adaptor on a flat and hard surface

that is resistant to heat damage.

Refer to the enclosed Instruction Manual for Safety and Comfort for
detailed precautions and handling instructions.

User’s Manual 1-4

1. Connect the power cord to the AC adaptor.

Figure 1-1 Connecting the power cord to the AC adaptor (2-pin plug)

Getting Started

Figure 1-2 Connecting the power cord to the AC adaptor (3-pin plug)

Either a 2-pin or 3-pin adaptor/cord will be included with the computer
depending on the model.

2. Connect the AC adaptor’s DC output plug to the DC IN 19V jack on the

right of the computer.

1

2

1. DC IN 19V jack

User’s Manual 1-5

2. DC output plug

Figure 1-3 Connecting the DC output plug to the computer

3. Plug the power cord into a live wall outlet - the Battery and DC IN

indicators on the front of the computer should glow.

Opening the display

The display panel can be opened to a wide range of angles for optimal
viewing.

While holding down the palm rest with one hand so that the main body of
the computer is not raised, slowly lift the display panel - this will allow the
angle of the display panel to be adjusted to provide optimum clarity.

Getting Started

1

1. Display panel

Figure 1-4 Opening the display panel

Use reasonable care when opening and closing the display panel. Opening
it vigorously or slamming it shut could damage the computer.

User’s Manual 1-6

Getting Started

■ Be careful not to open the display panel too far as this could put stress

on the display panel’s hinges and cause damage.

■ Do not press or push on the display panel.

■ Do not lift the computer by the display panel.

■ Do not close the display panel with pens or any other objects left in

between the display panel and the keyboard.

■ When opening or closing the display panel, place one hand on the

palm rest to hold the computer in place and use the other hand to
slowly open or close the display panel (Do not use excessive force
when opening or closing the display panel).

Turning on the power

This section describes how to turn on the power - the Power indicator will
then indicate the status. Please refer to the Monitoring of power condition
section in Chapter 6, Power and Power-Up Modes for more information.

■ After you turn on the power for the first time, do not turn it off until you

have set up the operating system. Please refer to the section Starting

up for the first time for more information.

■ Volume cannot be adjusted during Windows Setup.

1. Open the display panel.

2. Press and hold the computer's power button for one or two seconds.

User’s Manual 1-7

1

1. Power button

Getting Started

Figure 1-5 Turning on the power

Starting up for the first time

The Windows 7 Startup Screen will be the first screen displayed when you
turn on the power. Follow the on-screen instructions on each screen in
order to properly install the operating system.

When it is displayed, be sure to read the Software License Terms
carefully.

Turning off the power

The power can be turned off in one of three modes, either Shut Down
Mode, Hibernation Mode or Sleep Mode.

Shut Down Mode

When you turn off the power in Shut Down Mode no data will be saved and
the computer will boot to the operating system's main screen the next time
it is turned on.

1. If you have entered data, either save it to the hard disk drive or to other

storage media.

2. Make sure all disk/disc activity has stopped before removing the

CD/DVD or floppy diskette.

User’s Manual 1-8

Getting Started

■ Make sure the Hard Disk Drive/Optical Disc Drive indicators are off.

If you turn off the power while a disk (disc) is being accessed, you may
lose data or damage the disk.

■ Never turn off the power while an application is running. Doing so could

cause loss of data.

■ Never turn off the power, disconnect an external storage device or

remove storage media during data read/write. Doing so can cause data
loss.

3. Click Start.

4. Click the Shut down button ( ).

5. Turn off any peripheral devices connected to your computer.

Do not turn the computer or peripheral devices back on immediately - wait
a short period to avoid any potential damage.

Sleep Mode

If you have to interrupt your work, you are able to turn off the power without
exiting from your software by placing the computer into Sleep Mode. In this
mode data is maintained in the computer's main memory so that when you
turn on the power again, you can continue working right where you left off.

When you have to turn off your computer aboard an aircraft or in places
where electronic devices are regulated or controlled, always completely
shut down the computer. This includes turning off any wireless
communication functionalities and canceling settings that reactivate the
computer automatically, such as a timer recording function. Failure to
completely shut down the computer in this way could allow the operating
system to reactivate and run pre-programmed tasks or preserve unsaved
data, which could interfere with aviation or other systems, possibly causing
serious injury.

■ Before entering Sleep Mode, be sure to save your data.

■ Do not install or remove a memory module while the computer is in

Sleep Mode. The computer or the memory module could be damaged.

■ Do not remove the battery pack while the computer is in Sleep Mode

(unless the computer is connected to an AC power source). Data in
memory could be lost.

User’s Manual 1-9

Getting Started

■ When the AC adaptor is connected, the computer will go into Sleep

Mode according to the settings in the Power Options (to access it, Start

→

Control Panel → System and Security → Power Options).

■ To restore the operation of the computer from Sleep Mode, press and

hold the power button or any key on the keyboard for a short amount of
time. Please note that keyboard keys can only be used if the Wake-up
on Keyboard option is enabled within the HW Setup utility.

■ If the computer enters Sleep Mode while a network application is

active, the application might not be restored when the computer is next
turned on and the system returns from Sleep Mode.

■ To prevent the computer from automatically entering Sleep Mode,

disable Sleep Mode within the Power Options (to access it, Start

→

Control Panel

System and Security → Power Options).

→

■ To use the Hybrid Sleep function, configure it in the Power Options.

Benefits of Sleep Mode

The Sleep Mode feature provides the following benefits:

■ Restores the previous working environment more rapidly than does the

Hibernation Mode feature.

■ Saves power by shutting down the system when the computer receives

no input or hardware access for the time period set by the System
Sleep Mode feature.

■ Allows the use of the panel power off feature.

Executing Sleep Mode

You can also enable Sleep Mode by pressing FN + F3 - please refer to
Chapter 5, The Keyboard, for further details.

You can enter Sleep Mode in one of three ways:

■ Click Start, point to the arrow icon ( ) and then select

Sleep from the menu.

■ Close the display panel. Please note that this feature must be enabled

within the Power Options (to access it, click Start → Control Panel →
System and Security → Power Options).

■ Press the power button. Please note that this feature must be enabled

within the Power Options (to access it, click Start → Control Panel →
System and Security → Power Options).

When you turn the power back on, you can continue where you left when
you shut down the computer.

■ When the computer is in Sleep Mode, the power indicator will blink amber.

■ If you are operating the computer on battery power, you can lengthen

the overall operating time by turning it off into Hibernation Mode - Sleep
Mode will consume more power while the computer is off.

User’s Manual 1-10

Getting Started

Sleep Mode limitations

Sleep Mode will not function under the following conditions:

■ Power is turned back on immediately after shutting down.

■ Memory circuits are exposed to static electricity or electrical noise.

Hibernation Mode

The Hibernation Mode feature saves the contents of memory to the hard
disk drive when the computer is turned off so that, the next time it is turned
on, the previous state is restored. Please note that the Hibernation Mode
feature does not save the status of any peripheral devices connected to the
computer.

■ Save your data. While entering Hibernation Mode, the computer saves

the contents of memory to the hard disk drive. However, for safety
sake, it is best to save your data manually.

■ Data will be lost if you remove the battery or disconnect the AC adaptor

before the save is completed. Wait for the Hard Disk Drive indicator to
go out.

■ Do not install or remove a memory module while the computer is in

Hibernation Mode. Data will be lost.

Benefits of Hibernation Mode

The Hibernation Mode feature provides the following benefits:

■ Saves data to the hard disk drive when the computer automatically

shuts down because of a low battery condition.

■ You can return to your previous working environment immediately when

you turn on the computer.

■ Saves power by shutting down the system when the computer receives

no input or hardware access for the time period set by the System
Hibernate feature.

■ Allows the use of the panel power off feature.

Starting Hibernation Mode

You can also enable Hibernation Mode by pressing FN + F4 - please refer
to Chapter 5, The Keyboard, for further details.

To enter Hibernation Mode, follow the steps below.

1. Click Start.

2. Point to the arrow icon ( ) and then select Hibernate
from the menu.

User’s Manual 1-11

Getting Started

Automatic Hibernation Mode

The computer can be configured to enter Hibernation Mode automatically
when you press the power button or close the lid. In order to define these
settings, you can follow the steps as described below:

1. Click Start and click the Control Panel.

2. Click System and Security and click Power Options.

3. Click Choose what the power button does or Choose what closing
the lid does.

4. Enable the desired Hibernation Mode settings for When I press the
power button and When I close the lid.

5. Click the Save changes button.

Data save in Hibernation Mode

When you turn off the power in Hibernation Mode, the computer will take a
moment to save the current data in memory to the hard disk drive. During
this time, the Hard Disk Drive indicator will glow.

After you turn off the computer, and the content of memory has been saved
to the hard disk drive, turn off the power to any peripheral devices.

Do not turn the computer or devices back on immediately. Wait a moment
to let all capacitors fully discharge.

Restarting the computer

Certain conditions require that you reset the computer, for example if:

■ You change certain computer settings.

■ An error occurs and the computer does not respond to your keyboard

commands.

If you need to restart the computer, there are three ways this can be
achieved:

■ Click Start, point to the arrow icon ( ) and then select

Restart from the menu.

■ Press CTRL, ALT and DEL simultaneously (once) to display the menu

window, then select Restart from the Shut down options.

■ Press the power button and hold it down for four seconds. Once the

computer has turned itself off, wait between ten and fifteen seconds
before turning the power on again by pressing the power button.

User’s Manual 1-12

System Recovery Options

There is a hidden partition allocated on the hard disk drive for the System
Recovery Options.

This partition stores files which can be used to repair the system in the
event of a problem.

The System Recovery Options feature will be unusable if this partition is
deleted.

System Recovery Options

The System Recovery Options feature is installed on the hard disk when
shipped from the factory. The System Recovery Options menu includes
tools to repair startup problems, run diagnostics or restore the system.

See the Windows Help and Support content for more information about
Startup Repair.

The System Recovery Options can also be run manually to repair
problems.

Getting Started

The procedure is as follows. Follow the instructions shown on the on­screen menu.

1. Turn off the computer.

2. While holding the F8 key, turn on the computer.

3. The Advanced Boot Options menu will be displayed.
Use the arrow keys to select Repair Your Computer and press
ENTER.

4. Follow the on-screen instructions.

Check your Windows® manual for more information on backing up your
system (including the system image backup feature).

User’s Manual 1-13

System Recovery

This section describes the creation of Recovery Media and their use.

Creating Recovery Media

This section describes how to create Recovery Media.

■ Be sure to connect the AC adaptor when you create Recovery Media.

■ Be sure to close all other software programs except the Recovery

Media Creator.

■ Do not run software such as screen savers which can put a heavy load

on the CPU.

■ Operate the computer at full power.

■ Do not use power-saving features.

■ Do not write to the media when the virus check software is running.

Wait for it to finish, then disable virus detection programs including any
software that checks files automatically in the background.

Getting Started

■ Do not use utilities, including those intended to enhance hard disk drive

access speed. They may cause unstable operation and damage data.

■ Do not shut down/log off or Sleep/Hibernate while writing or rewriting

the media.

■ Set the computer on a level surface and avoid places subjected to

vibrations such as airplanes, trains, or cars.

■ Do not use on an unstable surface such as a stand.

A recovery image of the software on your computer is stored on the hard
disk drive, and can be copied to either DVD or USB Flash Memory by using
the following steps:

1. Select either blank DVD or USB Flash Memory.
The application will allow you to choose from a variety of different media

onto which the recovery image can be copied including DVD-R,
DVD-R DL, DVD-RW, DVD+R, DVD+R DL, DVD+RW and USB Flash
Memory.

■ Please note that some of the above media may not be compatible with

the optical disc drive installed into your computer. You should therefore
verify the optical disc drive supports the blank media you have chosen
before proceeding.

■ USB Flash Memory will be formatted and all the data in the USB Flash

Memory will be lost when proceeding.

2. Turn on your computer and allow it to load the Windows 7 operating
system from the hard disk drive as normal.

3. Insert the media into the computer.

■ Insert the first blank disc into the optical disc drive tray, or

Insert the USB Flash Memory into one available USB port

User’s Manual 1-14

Getting Started

4. Double click the Recovery Media Creator icon on the Windows 7
desktop, or select the application from Start Menu.

5. After Recovery Media Creator starts, select the type of media and the
title you wish to copy, and then click the Create button.

Restoring the pre-installed software from the Recovery hard disk
drive

A portion of the total hard disk drive space is configured as a hidden
recovery partition. This partition stores files which can be used to restore
pre-installed software in the event of a problem.

If you subsequently set up your hard disk drive again, do not change,
delete or add partitions in a manner other than specified in the manual,
otherwise you may find that space for the required software is not available.

In addition, if you use a third-party partitioning program to reconfigure the
partitions on your hard disk drive, you may find that it becomes impossible
to setup your computer.

When the sound mute feature has been activated by pressing the FN +
ESC key, be sure to disable this to allow sounds to be heard before starting

the restore process. Please refer to Chapter 5, The Keyboard, for further
details.

You can not use System Recovery Options if restoring the pre-installed
software without System Recovery Options.

When you reinstall the Windows operating system, the hard disk will be
reformatted and all data will be lost.

1. Turn off your computer.

2. While holding down 0 (zero) key on the keyboard, turn on your
computer.

3. A menu will be displayed from which you should follow the on-screen
instructions.

User’s Manual 1-15

Getting Started

Restoring the pre-installed software from your created Recovery
Media

If the pre-installed files are damaged, you are able to either use the
Recovery Media you have created or the hard disk drive recovery process
to restore the computer to the state it was in when you originally received it.
To perform this restoration, follow the steps below:

When the sound mute feature has been activated by pressing the FN +
ESC key, be sure to disable this to allow sounds to be heard before starting

the restore process. Please refer to Chapter 5, The Keyboard, for further
details.

You can not use System Recovery Options if restoring the pre-installed
software without System Recovery Options.

When you reinstall the Windows operating system, the hard disk will be
reformatted and all data will be lost.

1. Load the Recovery Media into the computer and turn off the computer's
power.

2. While holding down F12 key on the keyboard, turn on your computer ­when the TOSHIBA Leading Innovation >>> logo screen
appears, release the F12 key.

3. Use the up and down cursor key to select the appropriate option from
the menu according to your actual recovery media. Please refer to the

Boot Priority section in Chapter 7, HW Setup for further information.

4. A menu will be displayed from which you should follow the on-screen
instructions.

When drivers/utilities are installed, you can setup the respective
drivers/utilities from the following place. To open the setup files, Click Start

→

All Programs → TOSHIBA → Applications and Drivers.

User’s Manual 1-16

The Grand Tour

This chapter identifies the various components of the computer - it is
recommended that you become familiar with each before you operate the
computer.

Legal Footnote (Non-applicable Icons)*1

For more information regarding Non-applicable Icons, please refer to the
Legal Footnotes section in Appendix G or click the *1 above.

Please handle your computer carefully to avoid scratching or damaging the
surface.

Chapter 2

Front with the display closed

The following figure shows the computer’s front with its display panel in the
closed position.

1 3

1. Infrared Receiver Window* 2. Bridge media slot

3. System indicators

* Provided with some models.
Product appearance depends on the model you purchased.

Figure 2-1 Front of the computer with display panel closed

2

User’s Manual 2-1

The Grand Tour

Infrared Receiver
Window

This is a sensor window that receives signals
from the remote control which is provided with
your computer.

Bridge media slot This slot lets you insert an

SD™/SDHC™/SDXC™ memory card, Memory
Stick® (PRO™), xD-Picture Card™ and
MultiMediaCard™. Refer to the Optional devices
section in Chapter 3, Hardware, Utilities and

Options.

Keep foreign metal objects, such as screws, staples and paper clips, out of
the Bridge media slot. Foreign metal objects can create a short circuit,
which can cause damage and fire, possibly resulting in serious injury.

System indicators The LED system indicators for specific computer

operations glow when those operations are in
progress.

User’s Manual 2-2

Right side

The Grand Tour

The following figure shows the computer’s right side.

3 5

1 2 4 6

1. Headphone jack 4. Optical Disk Drive

2. Microphone jack 5. DC IN 19V jack

3. USB 2.0 ports (x2) 6. Security lock slot

Product appearance depends on the model you purchased.

Figure 2-2 The right side of the computer

Headphone jack This jack lets you connect digital speakers or a

stereo headphone (16 ohm minimum). The
internal speaker is automatically disabled when
digital speakers or headphones are connected.

Microphone jack A 3.5mm mini microphone jack enables

connection of a three-conductor mini jack for
stereo microphone input, and connection of a
stereo device for audio input.

The jack with the icon ( ) has Sleep and Music
function.

Universal Serial Bus
(USB 2.0) ports

Two Universal Serial Bus ports, which comply to
the USB 2.0 standard, are provided on the right
hand side of the computer.

Keep foreign metal objects, such as screws, staples and paper clips, out of
the USB connectors. Foreign metal objects can create a short circuit,
which can cause damage and fire, possibly resulting in serious injury.

Please note that it is not possible to confirm the operation of all functions of
all USB devices that are available. In view of this it may be noted that some
functions associated with a specific device might not operate properly.

User’s Manual 2-3

Left side

The Grand Tour

Optical Disk Drive The computer may be configured with a BD-

Writer, BD-Combo or DVD Super Multi drive.

DC IN 19V jack The AC adaptor connects to this jack in order to

power the computer and charge its internal
batteries. Please note that you should only use
the model of AC adaptor supplied with the
computer at the time of purchase - using the
wrong AC adaptor can cause damage to the
computer.

Security Lock Slot A security cable can be attached to this slot and

then connected to a desk or other large object in
order to deter theft of the computer.

The following figure shows the computer’s left side.

8

1 3 4 5 6 7 9

2

1. TV Tuner jack* 6. HDMI out port*

2. Modem jack* 7. eSATA/USB combo port

3. Cooling vents 8. ExpressCard slot

4. External monitor port 9. Universal Serial Bus (USB 2.0) port

5. LAN jack

* Provided with some models.
Product appearance depends on the model you purchased.

Figure 2-3 The left side of the computer

User’s Manual 2-4

The Grand Tour

TV Tuner jack TV Tuner enables watching and recording TV

programs. Some models are equipped with the
TV Tuner.

Modem jack The modem jack allows you use to attach a

modular cable in order to connect the internal
modem directly to a telephone line. Some
models are equipped with a built-in modem.

■ Connection to any communication line other than an analog phone line

could cause a PC system failure.

■ Connect the built-in modem only to ordinary analog phone lines.

■ Never connect the built-in modem to a digital line (ISDN).

■ Never connect the built-in modem to the digital connector on a

public telephone or to a digital private branch exchange (PBX).

■ Never connect the built-in modem to a key telephone system for

residences or offices.

■ Avoid using your computer modem with the telephone cable connected

during an electrical storm. There may be a remote risk of electric shock
from lightning.

Cooling vents The cooling vents allow air into the system to

help keep the processor and other components
from overheating.

Do not block the cooling vents. Keep foreign metal objects, such as
screws, staples and paper clips, out of the cooling vents. Foreign metal
objects can create a short circuit, which can cause damage and fire,
possibly resulting in serious injury.

External Monitor
port

This port allows you to connect an external
monitor to the computer.

LAN jack This jack lets you connect to a LAN. The adaptor

has built-in support for Ethernet LAN (10
megabits per second, 10BASE-T), Fast Ethernet
LAN (100 megabits per second, 100BASE-TX)
and Gigabit Ethernet LAN (1000 megabits per
second, 1000BASE-T). The LAN has two
indicators. Refer to Chapter 4, Operating Basics,
for details.

■ Do not connect any cable other than a LAN cable to the LAN jack. It

could cause damage or malfunction.

■ Do not connect the LAN cable to a power supply. It could cause

damage or malfunction.

User’s Manual 2-5

The Grand Tour

HDMI out port HDMI out port can connect with Type A

connector HDMI cable. HDMI cable can send
video and audio signals. In addition to this, it can
send and receive control signals.

eSATA/USB combo
port

This Universal Serial Bus port, which complies to
the USB 2.0 standard, is provided on the right
hand side of the computer. The ports with the
icon ( ) has USB Sleep and Charge function.
This port has eSATA (External Serial ATA)
function.

Keep foreign metal objects, such as screws, staples and paper clips, out of
the eSATA/USB combo port. Foreign metal objects can create a short
circuit, which can cause damage and fire, possibly resulting in serious
injury.

ExpressCard slot This slot allows you to install a single

ExpressCard device.

Universal Serial Bus
(USB 2.0) port

One Universal Serial Bus port, which complies to
the USB 2.0 standard, is provided on the left
hand side of the computer. The ports with the
icon ( ) has Sleep and Charge.

Back

Please note that it is not possible to confirm the operation of all functions of
all USB devices that are available. In view of this it may be noted that some
functions associated with a specific device might not operate properly.

The following figure shows the computer’s back.

Figure 2-4 The back of the computer

User’s Manual 2-6

Underside

The following figure shows the underside of the computer. You should
ensure that the display is closed before the computer is turned over to
avoid causing any damage.

The Grand Tour

1 2 3

5

4

1. Battery lock 4. Cooling vents

2. Battery pack 5. Memory module slot

3. Battery release latch

Product appearance depends on the model you purchased.

Figure 2-5 The underside of the computer

Battery lock Slide the battery lock to release the battery pack

ready for removal.

Battery pack The battery pack provides power to the computer

when the AC adaptor is not connected. For more
detailed information on the use and operation of
the battery pack please refer to Chapter 6, Power

and Power-Up Modes.

Battery release latch Slide and hold this latch into its 'Unlock' position

in order to release the battery pack for removal.
For more detailed information on removing the
battery pack please refer to Chapter 6, Power

and Power-Up Modes.

Cooling vents The cooling vents help keep the processor from

overheating.

User’s Manual 2-7

The Grand Tour

Do not block the cooling vents. Keep foreign metal objects, such as
screws, staples and paper clips, out of the cooling vents. Foreign metal
objects can create a short circuit, which can cause damage and
fire,possibly resulting in serious injury

Memory module slot The memory module slot allows for the

installation, replacement and removal of
additional memory module. Refer to the

Additional memory module section in Chapter 3,
Hardware, Utilities and Options.

User’s Manual 2-8

Front with the display open

This section shows the computer with the display panel open. In order to
open the display, lift the display panel up and position it at a comfortable
viewing angle for you.

The Grand Tour

15

14

13

1

2

3

4

5

6
7

9

10

6

11

7

12

8

1. Web Camera* 9. Touch Pad

2. Web Camera LED* 10. Fingerprint Sensor*

3. Microphone* 11. Touch Pad control buttons

4. Wireless LAN and Wireless WAN antennas

(not shown)*

5. Display screen 13. Power button

6. Display hinges 14. Ambient Light Sensor*

7. Stereo speakers 15. Function buttons

8. Keyboard

* Provided with some models.
Product appearance depends on the model you purchased.

Figure 2-6 The front of the computer with the display panel open

12. Touch Pad Enable/Disable button

User’s Manual 2-9

The Grand Tour

Web Camera Web Camera is a device that allows you to

record video or take photographs with your
computer. You can use it for video chatting or
video conferences using a communication tool
such as Windows Live Messenger. TOSHIBA
Web Camera Application will help you to add
various video effects to your video or photograph.

Enables the transmission of video and use of
video chat via the internet using specialized
applications.

Some models are equipped with a Web Camera.
Please refer to the Web Camera section in

Chapter 4, Operating Basics.

Web Camera LED

The Web Camera LED glows when the Web
Camera is operating.

Microphone A built-in microphone allows you to import and

record sounds for your application - please refer
to the Sound System section in Chapter 4,

Operating Basics for more information. Some

models are equipped with a microphone.

Wireless LAN
antennas

Wireless WAN
antennas

Some computers in this series are equipped with
the Wireless LAN antennas.

Some computers in this series are equipped with
the Wireless WAN antennas.

Display screen Please be aware that, when the computer is

operating on the AC adaptor, the image
displayed on the internal screen will be
somewhat brighter than when it operates on
battery power. This difference in brightness
levels is intended to save power when operating
on batteries. For more information on the
computer's display, please refer to the Display

Controller and Video mode section in Appendix

B.

Display hinges The display hinges allow the display panel to be

Stereo speakers The speakers emit sound generated by your

User’s Manual 2-10

position at a variety of easy-to-view angles.

software as well as audio alarms, such as low
battery condition, generated by the system.
Some models are equipped with Harman/Kardon
speakers.

The Grand Tour

Keyboard Your computer may intergrated with two kinds of

keyboards: A4 size keyboard which provides the
embedded numeric overlay keys, dedicated
cursor control overlay keys, and and
Keys; full size keyboard which provides
dedicated numeric keys, dedicated cursor control
keys, and and Keys. The keyboard is

®

compatible with the IBM

enhanced keyboard.

Refer to Chapter 5, The Keyboard, for details.

Touch Pad The Touch Pad located in the palm rest is used to

control the movement of the on-screen pointer.
For more information, please refer to the Using

the Touch Pad section in Chapter 4, Operating

Basics.

Fingerprint Sensor This sensor enables you to enroll and recognize

a fingerprint.
For detailed information on Fingerprint Sensor,

refer to Chapter 4, Using the Fingerprint Sensor.
Some models are equipped with a Fingerprint

Sensor.

Touch Pad control
buttons

The control buttons located below the Touch Pad
allow you to select menu items or manipulate text
and graphics as designated by the on-screen
pointer.

Touchpad
Enable/Disable
button

The Touchpad Enable/Disable button below the
spacebar allows you to turn off the touchpad.
Press the button again to enable the touchpad.

Power button Press this button to turn the computer's power on

and off.

Ambient Light
Sensor

Automatically adjusts picture brightness to
deliver the most viewable image under any room
lighting conditions. By utilizing up to 8 different
brightness settings, you will see the best picture
possible in any room environment.

Function Buttons Seven buttons are available for use:

These buttons allow you to manage audio/video,
run applications and access utilities.

User’s Manual 2-11

Indicators

This section explains indicator functions.

System indicators

LED system indicators below their respective icons, glow when specific
computer operations are in progress.

DC IN The DC IN indicator normally glows white when

The Grand Tour

Figure 2-7 System indicators

power is being correctly supplied from the AC
power adaptor. However, If the output voltage
from the adaptor is abnormal, or if the computer's
power supply malfunctions, this indicator will
flash amber.

Power The Power indicator normally glows white when

the computer is turned on. However, if you turn
the computer off into Sleep Mode, this indicator
will flash amber - approximately two second on,
two seconds off - both while the system is
shutting down and while it remains turned off.

Battery The Battery indicator shows the condition of the

battery's charge - white indicates the battery is
fully charged, amber indicates the battery is
charging, and flashing amber indicates a low
battery condition. Please refer to Chapter 6,

Power and Power-Up Modes for more

information on this feature.

Hard Disk Drive/
Optical Disc Drive

Bridge media slot The Bridge media slot indicator glows white

The Hard Disk Drive/Optical Disc Drive
indicator glows white whenever the computer is
accessing the built-in hard disk drive, optical disc
drive or eSATA device.

when the computer is accessing the Bridge
media slot.

Wireless indicators

Wireless indicators below their respective icons, glow when specific
computer operations are in progress.

User’s Manual 2-12

Figure 2-8 Wireless indicators

The Grand Tour

Wireless
communication

Wireless WAN The Wireless WAN indicator glows or blinks blue

Keyboard indicators

Full size keyboard

The following figure shows the positions of the CAPS LOCK indicator and
the NUM LOCK indicator, which show the following conditions:

The Wireless communication indicator blinks
amber when the Bluetooth, Wireless LAN and
Wireless WAN functions are turned on.

Only some models are equipped with Bluetooth
and Wireless LAN functions.

when the Wireless WAN function is on.
The indicator will glow or blink in order to indicate

the connection status of the Wireless WAN
function.

A Wireless WAN module must be installed to use
this function. Some models are equipped with a
Wireless WAN module.

■ When the CAPS LOCK indicator glows, the keyboard will produce

capitals when any letter is typed.

■ When the NUM LOCK indicator glows, the ten key allows you to enter

numbers.

2

1

1. CAPS LOCK indicator 2. NUM LOCK indicator

User’s Manual 2-13

Figure 2-9 Keypad indicators

CAPS LOCK This indicator glows green when letter keys are

NUM LOCK When the NUM LOCK indicator glows, you can

Optical disc drives

The computer is configured with a DVD Super Multi drive or BD-Writer or
BD-Combo drive. A Serial ATA interface controller is used for 12cm(4.72")
and 8cm(3.15") (Tray ODD) and 12cm(4.72") (Slot ODD) CD/DVD/BD
operation. For further information on loading and unloading discs, please
refer to the Writing CD/DVD/BD on DVD Super Multi drive or BD-Writer

drive or BD-Combo drive section in Chapter 4, Operating Basics.

Region codes for BD media

The Grand Tour

locked into their uppercase format.

use the number keys on the keyboard for number
entry.

BD is manufactured according to the specifications of three marketing
regions. When you purchase BD-Video (BDMV), make sure it matches your
player, otherwise it will not play properly.

Code Region

A Canada, United States, Japan, Southeast Asia,

East Asia, Central America, South America

B Europe, Australia, New Zealand, Middle East,

Africa

C China, India, Russia, Mongolia, Indian

Subcontinent

User’s Manual 2-14

Region codes for DVD drives and media

DVD Super Multi drives and their associated media are manufactured
according to the specifications of six marketing regions. When you
purchase DVD-Video, make sure it matches your drive, otherwise it will not
play properly.

Code Region

1 Canada, United States

2 Japan, Europe, South Africa, Middle East

3 South East Asia, East Asia

4 Australia, New Zealand, Pacific Islands, Central

America, South America, Caribbean

5 Russia, Indian Subcontinent, Africa, North Korea,

Mongolia

The Grand Tour

Writable discs

This section describes the types of writable CD/DVD/BD discs. Check the
specifications of your drive to see the types of discs it can write. Use
TOSHIBA Disc Creator to write compact discs. Please refer to Chapter 4,

Operating Basics for further information.

CDs

■ CD-R discs can be written only once. The recorded data cannot be

erased or changed.

■ CD-RW discs including multi speed CD-RW discs, high-speed CD-RW

discs and ultra-speed CD-RW discs can be recorded more than once.

DVDs

■ DVD-R, DVD+R, DVD-R (Dual Layer) and DVD+R (Double Layer) discs

can be written only once. The recorded data cannot be erased or
changed.

■ DVD-RW, DVD+RW and DVD-RAM discs can be recorded more than

once.

6 China

Some types and formats of DVD-R (Dual Layer) and DVD+R (Double
Layer) discs may be unreadable.

User’s Manual 2-15

BDs

■ BD-R, BD-R(DL) discs can be written only once. The recorded

data cannot be erased or changed.

■ BD-RE, BD-RE(DL) discs can be recorded more than once.

BD-Writer drive

The full-size BD-Writer drive module lets you record data to writable
CD/DVD/BD discs as well as run either 12 cm (4.72") or 8 cm (3.15") for
Tray type CD/DVD/BDs without using an adaptor.

The read speed is slower at the centre of a disc and faster at the outer
edge.

BD-ROM read 6 speed (maximum)
DVD ROM read 8 speed (maximum)
CD-ROM read 24 speed (maximum)
BD-R write 6 speed (maximum)
BD-R(DL) write 4 speed (maximum)
BD-RE write 2 speed (maximum)
BD-RE(DL) write 2 speed (maximum)
DVD-R write 8 speed (maximum)
DVD-RW write 6 speed (maximum)
DVD+R write 8 speed (maximum)
DVD+RW write 8 speed (maximum)
DVD-R DL write 4 speed (maximum)
DVD+R DL write 4 speed (maximum)
DVD-RAM write 5 speed (maximum)
CD-R write 24 speed (maximum)
CD-RW write 16 speed (maximum, Ultra-speed media)

The Grand Tour

User’s Manual 2-16

BD-Combo drive

The full-size BD-Combo drive module lets you record data to writable
CD/DVDs as well as run either 12 cm (4.72") or 8 cm (3.15") for Tray type
CD/DVD/BDs without using an adaptor.

The read speed is slower at the centre of a disc and faster at the outer
edge.

BD-ROM read 6 speed (maximum)
DVD-ROM read 8 speed (maximum)
CD-ROM read 24 speed (maximum)
DVD-R write 8 speed (maximum)
DVD-RW write 6 speed (maximum)
DVD+R write 8 speed (maximum)
DVD+RW write 4 speed (maximum)
DVD-R DL write 4 speed (maximum)
DVD+R DL write 4 speed (maximum)
DVD-RAM write 5 speed (maximum)
CD-R write 24 speed (maximum)
CD-RW write 16 speed (maximum, Ultra-speed media)

The Grand Tour

DVD Super Multi drive

The full-size DVD Super Multi drive module allows you to record data to
recordable CD's and DVD's as well as run 12cm(4.72") and 8cm(3.15") (for
Tray type) or 12cm (4.72") (for Slot type) CD's and DVD's without using an
adaptor.

The speed is slower at the center of a disc and faster at the outer edge.

DVD ROM read 8 speed (maximum)
CD-ROM read 24 speed (maximum)
DVD-R write 8 speed (maximum)
DVD-R DL write 6 speed (maximum)
DVD-RW write 6 speed (maximum)
DVD+R write 8 speed (maximum)
DVD+R DL write 6 speed (maximum)
DVD+RW write 8 speed (maximum)
DVD-RAM write 5 speed (maximum)
CD-R write 24 speed (maximum)
CD-RW write 24 speed (maximum,

Ultra-speed media)

Use only round standard (12cm) discs with this slot-loading optical drive.
Any other size or shape disc may not be able to be removed from the slot
and may damage the system as well as the disc.

User’s Manual 2-17

Remote Controller

A remote controller, which is provided with some models, enables you to
perform some functions of your computer from a distant location.

There are two different types of remote controllers:

■ Full size remote controller

■ Slim size remote controller

■ Some models are included with either a Full size remote controller or

Slim size remote controller.

■ Models which include the Slim size remote controller do not have a TV

tuner installed and so do not allow viewing of TV programs.

The following figure shows the buttons on the Remote Controller.
You can use your Remote Controller with Media Center to play CDs, DVDs,

BDs and videos, and view pictures. The Remote Controller helps you
navigate through Media Center just as a cable TV remote control navigates
cable TV options or controls the playback of a movie in a VCR or DVD
player.

The Grand Tour

Using the Remote Controller, you can:

■ Navigate and control all Media Center windows.

■ Control the video display.

■ Place the computer in and out of Sleep Mode.

Refer to the Using the Remote Controller section in this chapter for
information on how to use the Remote Controller as well as how to install
and remove its batteries.

User’s Manual 2-18

Full Size Remote Controller

e
c

The Grand Tour

b
a

d

g

i

k

m

o

s
t

h
f
j

l
q

n

p

r
u

v

w

z

x

1. Power

2. Access indicator

3. Record

4. Stop

5. Pause

6. Play

7. REW (Rewind)

8. FWD (Fast Forward)

9. Replay

10. Skip

11.Back

12.More Info

13. Arrows

Figure 2-10 Full Size Remote Controller

User’s Manual 2-19

14. OK

15. Volume Control

16. Channel/Page Control

17. Start

18. Mute

19. Recorded TV

20. Guide

21. Live TV

22. DVD Menu

23. Numbers

24. Clear

25. Enter

26. Teletext

y

The Grand Tour

Power Starts or terminates the operating system.

This button functions like the Power button of
your computer. By default, the Sleep Mode is
equivalent to the Power Off state of your
computer. To change the setting, click Start,
select Control panel → System and Security →
Power Options. When pressing the Sleep
button, the following three options are available:
Do nothing, Sleep and Hibernation.

Access indicator This indicator will glow while the Remote

Controller is sending signals to the computer.
Please note that this indicator will not light after
the battery has been completely discharged.

Record Records the selected television program and

stores it on your hand disk drive.

Stop Stops the media currently playing.

Pause Pauses an audio or video track, and live or

recorded TV programs.

Play Plays the selected media.

REW (Rewind) Moves the media (video, DVD, music, and so

on) backwards.

FWD (Fast Forward) Moves the media (video, DVD, music, and so

on) forwards.

Replay Moves media backward (seven seconds for

videos and live TV, one music track or one DVD
chapter at a time).

Skip Moves media forward (30 seconds for videos

and live TV, one music track or one DVD
chapter).

Back Displays the previous window.

More Info The button provides more details on a TV

Arrows Moves the cursor to navigate within Media

User’s Manual 2-20

program than is listed in the Guide.

Center windows.

The Grand Tour

OK Selects the desired action or window option. It

acts like the ENTER Key. If watching TV in full
screen mode, pressing OK switches back to the
previous viewed channel. Press again to toggle
back. It acts the same way as a Jump button on
some TV remote controls.

Volume + Increases the volume while watching TV,

viewing DVD's or replaying CD's.

Volume - Decreases the volume while watching TV,

viewing DVD's or replaying CD's.

Start Opens Media Center to the main window.

Channel/Page up (+)
and down (-)

Changes the TV channel or moves a page up
and down, depending on the available options.

Mute Turns your computer sound on/off.

Recorded TV Allows you to start recording of TV programs.

The Recorded TV feature of Media Center will
be activated.

Guide Opens the Television Program Guide to display

available TV channels and programs to watch
and record.

Live TV A shortcut to the full screen view. It also takes

you to the current point in a live TV program after
pausing live TV.

DVD Menu Opens the main menu on a DVD movie, if

available.

Numbers Allows you to select a channel or chapter

number while watching TV, or CD/DVD/BD
replay.

Clear Deletes entered numbers, letters or symbols.

Enter The OK button on the Remote Controller has the

User’s Manual 2-21

Numbers, letters or symbols can be entered.
To select a channel or chapter number of two or

more digits, press the buttons sequentially. For
example, press the "1" button and then the "0"
button to select the number 10.

same functions.

The Grand Tour

Red, Green, Yellow
and Blue buttons

Teletext Starts or terminates the Teletext mode.

Slim Size Remote Controller

1 3

4
5

7
8

It jumps to a registration link.
These buttons are not provided with some

models.

This button is not provided with some models.

2

6

9

10
11

11
13

14 15
11

16
17

1. DVD Menu

2. Start

3. Power

4. REW (Rewind)

5. Play/Pause

6. FWD (Fast Forward)

7. Replay

8. Stop

9. Skip

Figure 2-11 Slim Size Remote Controller

12

11

18

10. Back

11. Arro ws

12. More Info

13. OK

14. Volume +

15. Brightness up

16. Volume -

17. Mute

18. Brightness down

User’s Manual 2-22

The Grand Tour

DVD Menu Opens the main menu on a DVD movie, if

available.

Start Opens Media Center to the main window.

Power Starts or terminates the operating system.

This button functions like the Power button of
your computer. By default, the Sleep Mode is
equivalent to the Power Off state of your
computer. To change the setting, click Start,
select Control panel → System and Security →
Power Options. The following four options are
available: Do nothing, Sleep, Hibernate and Shut
down

REW (Rewind) Moves the media (video, DVD, music, and so

on) backwards.

Play/Pause Plays the selected media. Pauses an audio or

video track.

FWD (Fast Forward) Moves the media (video, DVD, music, and so

on) forwards.

Replay Moves media backward (seven seconds for

videos, one music track or one DVD chapter at a
time).

Stop Stops the media currently playing.

Skip Moves media forward (30 seconds for videos,

one music track or one DVD chapter).

Back Displays the previous window.

Arrows Moves the cursor to navigate within Media

Center windows.

More Info This button has the same function as the

secondary (right) mouse button. Use it to display
more executable options.

OK Selects the desired action or window option. It

Volume + Increases the volume while viewing DVD/BD or

Brightness up Increases the computer's display panel

User’s Manual 2-23

acts like the ENTER Key.

replaying CD.

brightness in individual steps.

Volume - Decreases the volume while viewing DVD/BD or

replaying CD.

Mute Turns your computer sound on/off.

Brightness down Decreases the computer's display panel

brightness in individual steps.

Using the Remote Controller

Some computers include a remote control unit, which allows you to control
some of your computer’s functions from a distant location.

■ The Remote Controller is designed specifically for this computer.

■ Some application programs may not support remote control functions.

Operational range of the Remote Controller

The Grand Tour

Point the Remote controller at your computer and press a button. The
operational angle and distance are described below.

Distance Within 5 m from the infrared receiver window.

Angle Within a 30 degree horizontal and 15 degree

vertical range of the infrared receiver window.

User’s Manual 2-24

The Grand Tour

30˚

30˚

Figure 2-12 Operational range of the remote control

5m

15˚

15˚

* The appearance of the provided Remote Controller may vary from model
to model.

Even if the remote controller is within the effective range as described
above, it may malfunction or not work correctly in the following cases.

■ When an obstacle stands between the infrared receiver window of your

computer and the Remote Controller.

■ When direct sunlight or strong fluorescent light strikes the infrared

receiver window.

■ When the infrared receiver window or the infrared emission part of the

Remote Controller is dirty.

■ When other computers which use an infrared remote controller are

used near to your computer.

■ When a low battery condition is present.

Installing/Removing batteries

Be sure to install the provided CR2016 type batteries before using the
remote controller.

User’s Manual 2-25

The Grand Tour

Store the battery for the remote control beyond the reach of children.
If a child swallows a battery, this might result in choking. If it happens,

contact a doctor immediately.

Observe the following precautions when using the battery of the Remote
Controller.

■ Do not use batteries other than those specified.

■ Ensure that you insert the batteries with their polarities correctly

aligned (+ or -).

■ Do not recharge, heat, disassemble or short the battery, or put it into a

fire or flame.

■ Do not use a battery whose 'recommended expiration date' has been

reached, or which is completely discharged.

■ Do not use different types of batteries or old and new batteries at the

same time.

■ Do not carry the battery together with metal necklaces, hairpins or

other metal accessories.

■ When storing or disposing of used batteries, make sure to put some

insulation tape on their terminals (+ and -) to avoid short-circuits.

If these precautions are not followed, heating, fluid leakage or explosion
may occur. This may cause burns or personal injury. If battery fluid gets on
your skin or clothes, wash immediately with clean water. If battery fluid
gets in your eyes, rinse your eyes with clean water immediately and see a
doctor. Do not touch the battery fluid on instruments or devices with bare
hands. Wipe off with a cloth or paper towel.

Type of battery that can be used for the Full Size Remote Controller

When the batteries shipped with the Remote Controller are discharged,
replace them with commercially available AA manganese batteries or AA
alkaline batteries. Other types or battery should not be used.

Installing the batteries

1. Open the battery cover on the back of the Remote Controller. Slide the
cover in the direction of the arrow to remove the cover.

User’s Manual 2-26

Figure 2-13 Opening the battery cover

The Grand Tour

2. Insert the batteries in place.
Be sure to place the batteries with their polarities (+ and -) in the correct
position.

Figure 2-14 Inserting the batteries

3. Close the battery cover.
Close the cover securely until it clicks.

Replacing the batteries

When the batteries in the Remote Controller reach the end of their life, the
Remote Controller may not operate correctly or work only within a short
distance from your computer. In this instance, you should purchase new
batteries and replace the discharged ones.

1. Open the battery cover on the back of the Remote Controller.

2. Replace the batteries.
Be sure to place the batteries with their polarities (+ and -) in the correct
position.

Figure 2-15 Closing the battery cover

Figure 2-16 Removing the batteries

3. Close the battery cover until it clicks.

User’s Manual 2-27

The Grand Tour

Type of battery that can be used for the Slim Size Remote Controller

When the batteries shipped with the Remote Controller are discharged,
replace them with commercially available CR2016 Lithium batteries. Other
types or battery should not be used.

Installing the battery

1. Open the battery cover on the back side of the remote controller.

Figure 2-17 Opening the battery cover

2. Be sure to place the battery with correct polarities. Press the battery
down to the stopper then push it forward to fit into the battery case.

1

1. Stopper

3. Close the battery cover. Close the cover securely until it clicks.

Replacing the battery

2

2. Battery

Figure 2-18 Inserting the battery

Figure 2-19 Closing the battery cover

1. Open the battery cover on the back side of the remote controller.

2. Hold down the stopper and slide the battery out of battery case.

User’s Manual 2-28

Figure 2-20 Removing the batteries

3. Insert the battery in place. Be sure to place the batteries with correct
polarities. Press the battery down to the stopper then push it forward to
fit into the battery case.

4. Close the battery cover. Close the cover securely until it clicks.

Placing Slim size remote controller

Inserting a Slim size remote controller

The Grand Tour

To insert a Slim size remote controller, follow the steps as detailed below:

1. Make sure the ExpressCard slot is empty.

2. Set the front side upward and insert a Slim size remote controller.

Figure 2-21 Inserting a Slim size remote controller

3. Press a Slim size remote controller gently to ensure a firm connection is
made.

Removing a Slim size remote controller

To remove a Slim size remote controller, follow the steps as detailed below:

1. Press a Slim size remote controller slightly to make it stretch out.

2. Grasp a Slim size remote controller and pull it out from the slot.

User’s Manual 2-29

AC adaptor

The Grand Tour

Figure 2-22 Removing a Slim size remote controller

The AC adaptor can automatically adjust to any voltage ranging from 100 to
240 volts and to a frequency of either 50 or 60 hertz, enabling you to use
this computer in almost all country/region. The adaptor converts AC power
to DC power and reduces the voltage supplied to this computer.

To recharge the battery, simply connect the AC adaptor to a power source
and to the computer. Please refer to Chapter 6, Power and Power-Up

Modes for further information.

Figure 2-23 The AC adaptor (2-pin plug)

User’s Manual 2-30

Figure 2-24 The AC adaptor (3-pin plug)

The Grand Tour

■ Depending on the model in question, either a 2-pin or 3-pin

adaptor/power lead will be bundled with the computer.

■ Do not use a 3-pin to 2-pin conversion plug.

■ The supplied power cord conforms to safety rules and regulations in

the region the product is bought and should not be used outside of this
region. In order to use the adaptor/computer in other regions, you
should please buy a power cord that conforms to the safety rules and
regulations in that particular region.

Always use the TOSHIBA AC adaptor that was included with your
computer, or use AC adaptors specified by TOSHIBA to avoid any risk of
fire or other damage to the computer. Use of an incompatible AC adaptor
could cause fire or damage to the computer possibly resulting in serious
injury. TOSHIBA assumes no liability for any damage caused by use of an
incompatible adaptor.

User’s Manual 2-31

Chapter 3

Hardware, Utilities and Options

Hardware

This section describes the hardware of your computer.
The actual specifications may vary depending on the model you

purchased.

Processor

CPU Your computer is equipped with one processor

and processor type varies depending on model.
To check which type of processor is included in

your model, open the TOSHIBA PC Diagnostic
Tool Utility by clicking Start → All Programs →
TOSHIBA → Utilities → PC Diagnostic Tool.

Legal Footnote (CPU)*2

For more information on the CPU, please refer to the Legal Footnotes
section in Appendix G or Click the *2 above.

User’s Manual 3-1

Hardware, Utilities and Options

Memory

Memory slots 1 GB, 2 GB or 4 GB memory modules can be

installed in the computer's two memory slots for a
maximum of 8,192MB system memory.

This computer can be equipped with memory
modules of a maximum size of 8,192MB. The
actual amount of useable system memory will be
less than the installed memory modules.

Video RAM The memory in a computer's graphics adaptor,

used to store the image displayed on a bitmap
display.

The amount of Video RAM available is
dependent on the computer's system memory.

Start → Control Panel → Appearance and
Personalization → Display → Adjust
resolution.

The amount of Video RAM can be verified by
clicking the Advanced Settings button in the
Screen Resolution window.

If your computer is configured with more than 3 GB memory, the memory
might be displayed as approximately 3 GB only (depending on the
computer’s hardware specifications).

This is correct because the operating system usually displays the available
memory instead of the physical memory (RAM) built into the computer.

Various system components (like the video adapter’s GPU and PCI
devices like Wireless LAN, etc.) require their own memory space. Since a
32-bit operating system cannot address more than 4 GB of memory, these
system resources overlap the physical memory. It is a technical limitation
that the overlapped memory is not available to the operating system. Even
though some tools might display the actual physical memory built into your
computer, the memory available to the operating system will still be
approximately 3 GB only.

Computers configured with a 64-bit operating system can address 4 GB or
more of system memory.

Legal Footnote (Memory (Main System))*3

For more information regarding Memory (Main System), please refer to the
Legal Footnotes section in Appendix G or click the *3 above.

Power

Battery pack The computer is powered by one rechargeable

User’s Manual 3-2

lithium-ion battery pack.

Hardware, Utilities and Options

Legal Footnote (Battery Life)*4

For more information regarding Battery Life, please refer to the Legal
Footnotes section in Appendix G or click the *4 above.

RTC battery The internal RTC battery backs up the Real Time

Clock (RTC) and calendar.

AC adaptor The AC adaptor provides power to the system

and recharges the batteries when they are low. It
comes with a detachable power cord which will
either have a 2-pin or 3-pin plug enclosure.

As the AC adaptor is universal, it can receive a
range of AC voltages from 100 to 240 volts,
however you should note that the output current
varies among different models. Using the wrong
adaptor can damage your computer. Refer to the

AC adaptor section in Chapter 2, The Grand

Tou r.

Disks

Hard disk drive or
Solid state drive

■ In this manual, the word "HDD" or "Hard disk drive" also refers to the

SSD unless otherwise stated.

■ SSD is a large-capacity storage media which uses Solid-State Memory

in place of a magnetic disk of the hard disk.

Under certain unusual conditions of prolonged non-use and/or exposure to
high temperatures, the SSD may be vulnerable to data retention errors.

This computer is equipped with one of the
following hard disk drive (HDD) types. The
capacity of each hard disk drive model is
different.

Please note that part of the hard disk drive's
overall capacity is reserved as administration
space. Additional HDD/SSD drive sizes may be
introduced.

Legal Footnote (Hard Disk Drive (HDD) Capacity)*5

For more information regarding Hard Disk Drive (HDD) Capacity, please
refer to the Legal Footnotes section in Appendix G or click the *5 above.

User’s Manual 3-3

Hardware, Utilities and Options

Optical disc drive

Drive The following optical disc drive may be pre-

installed in this computer.

■ DVD Super Multi drive Double Layer

■ DVD Super Multi drive with Labelflash

■ BD-Writer drive

■ BD-Combo drive

Display

The computer's internal display panel supports high-resolution video
graphics and can be set to a wide range of viewing angles for maximum
comfort and readability.

Display panel

40.6cm (16.0") or 39.6cm (15.6") TFT LCD
screen, 262K colors, with the following resolution:

■ HD, 1366 horizontal x 768 vertical pixels

Display Power Saving Technology

Intel chipset model may include the Display Power Saving Technology
feature that can save the computer's power consumption by optimizing
picture contrast on the internal LCD. This feature can be used if the
computer is:

■ configured with Intel

■ running under battery mode

■ using the internal LCD display only

The Display Power Saving Technology feature can be enabled in the Intel®
Graphics and Media Control Panel.

You can access this control panel in one of the following ways:

■ Click Start → Control Panel. Select Large icons or Small icons in

View by, and then click Intel(R) Graphics and Media.

■ Right-click on the desktop and click Graphics Properties...

In this control panel,

®

HM55 or HM57 Express Chipset

1. Click Power and then click Power Features.

2. Select On battery from the drop-down menu in Graphics Power Plan
Settings and then select the Display Power Saving Technology
check box.

If you want to improve the picture quality under the conditions mentioned
above, adjust the setting towards Maximum Quality or disable this feature.

*Please visit your region's web site or refer to the catalog for the
configuration details of the model that you have purchased.

User’s Manual 3-4

Hardware, Utilities and Options

AMD® Vari-Bright™

AMD chipset model may include the AMD® Vari-Bright™ feature that can
save the computer's power consumption by optimizing picture contrast on
the internal LCD. This feature can be used if the computer is:

■ running under battery mode

■ using the internal LCD display only

The Vari-Bright™ feature can be enabled in the Catalyst Control Center.
To access this center, go to
Start → All Programs → Catalyst Control Center → CCC - Advanced

In this control center,

1. Click Graphics at the upper left, and then select PowerPlay™ from the
drop-down menu.

2. Select the Enable PowerPlay™ check box, and then select the Enable
Vari-Bright™ check box.

If you want to improve the picture quality under the conditions mentioned
above, adjust the setting towards Maximize Quality or disable this feature.

Legal Footnote (LCD)*6

For more information regarding the LCD, please refer to the Legal
Footnotes section in Appendix G or click the *6 above.

Graphics controller The graphics controller maximizes display

performance. Refer to Display Controller and

Video mode section in Appendix B for more

information.

Graphics Control

Some NVIDIA graphics models may include NVIDIA® OptimusTM technology
feature.

This section describes how to configure 3D settings for NVIDIA® OptimusTM
technology in the NVIDIA Control Panel.

®

NVIDIA
performance by seamlessly switching between a discrete NVIDIA GPU for
great graphics performance and an Intel integrated graphics chip for
sustained battery life. Switching is automatic and does not require the user
to reboot the notebook.

OptimusTM technology intelligently optimizes notebook

In the Manage 3D Settings menu of NVIDIA Control Panel, you can change
the global 3D settings and create overrides for specific programs. The
overrides will be used automatically each time the specified programs are
launched.

User’s Manual 3-5

Hardware, Utilities and Options

■ Please use the default setting for NVIDIA Optimus technology.

■ If the program does not run normally after the setting has been

changed, please restore the program to the default setting.

■ If the program does not run normally, please restore the preferred

graphics processor to the default setting.

3D Global Settings

1. Click Start → Control Panel → NVIDIA Control Panel.

2. Expand the 3D Settings category and select Manage 3D settings.

3. In the Global Settings tab, select the preferred graphics processor
from the drop-down list. For programs that require a specific graphics
processor, this setting can not be changed.

4. Configure the global settings for the preferred graphics processor.

■ To view a description for an option and its typical usage scenario,

move the cursor over an option.

■ To view detailed instructions, select Help from the menu bar and

then NVIDIA Control Panel Help.

■ To restore the default settings for an option, click the option and then

click Restore.

User’s Manual 3-6

Hardware, Utilities and Options

3D Program Override Settings

1. Click Start → Control Panel → NVIDIA Control Panel.

2. Expand the 3D Settings category and select Manage 3D settings.

3. In the Program Settings tab, select a program to customize from the
drop-down list.

■ To add a program to the list, click Add and then select the desired

program.

■ To remove a program from the list, click the program you wish to

remove and then click Remove.

■ To restore default settings for a program, click the program and then

click Restore.

4. Select the preferred graphics processor for this program. For programs
that require a specific graphics processor, this setting can not be
changed.

■ High-performance NVIDIA processor: Please select this setting for

the program which needs great graphics performance like as 3D
game.

■ Integrated graphics: Please select this setting for the program which

doesn't need great graphics performance like as 2D game.

5. Configure the override settings for the program selected.

■ To view a description for an option and its typical usage scenario,

move the cursor over an option.

■ To view detailed instructions, select Help from the menu bar and

then NVIDIA Control Panel Help.

Legal Footnote (Graphics Processor Unit ("GPU"))*7

For more information regarding the Graphics Processor Unit ("GPU"),
please refer to the Legal Footnotes section in Appendix G or click the *7
above.

User’s Manual 3-7

Hardware, Utilities and Options

Sound

Sound system The integrated sound system provides support

for the computer's internal speakers and
microphone, as allowing an external microphone
and headphones to be connected via the
appropriate jacks.

Multimedia

Web Camera Web Camera is a device that allows you to

record video or take photographs with your
computer. You can use it for video chatting or
video conferences using a communication tool
such as Windows Live Messenger. TOSHIBA
Web Camera Application will help you to add
various video effects to your video or photograph.

Please refer to the Web Camera section in
Chapter 4, Operating Basics.

Communications

Modem The integrated modem provides capability for

data and fax communications that support the
V.90 (V.92) standards and includes a modem
jack for connection to the telephone line. Please
note that both the V.90 and V.92 standards are
only supported in the USA, Canada, United
Kingdom, France, Germany and Australia - only
the V.90 standard is supported in other regions.
You should also be aware that the speed of data
and fax transfer will depend on the analog
telephone line conditions.

Some models are equipped with the integrated
modem.

LAN The computer has built-in support for Ethernet

LAN (10 megabits per second, 10BASE-T), Fast
Ethernet LAN (100 megabits per second,
100BASE-TX) and Gigabit Ethernet LAN (1000
megabits per second, 1000BASE-T).

Bluetooth Some computers in this series have Bluetooth

wireless communication function which
eliminates the need for cables between
electronic devices such as computers, printers
and mobile phones. When it is enabled,
Bluetooth provides the wireless personal area
network environment which is safe and
trustworthy, that is quick and easy.

User’s Manual 3-8

Wireless LAN Some computers in this series are equipped with

Legal Footnote (Wireless LAN)*8

For more information regarding Wireless LAN, please refer to the Legal
Footnotes section in Appendix G or click the *8 above.

Special features

The following features are either unique to TOSHIBA computers or are
advanced features which make the computer more convenient to use.

Access each function using the following procedures.

Hardware, Utilities and Options

a Wireless LAN module that is compatible with
other LAN systems based on Direct Sequence
Spread Spectrum/Orthogonal Frequency Division
Multiplexing radio technology that complies with
the IEEE 802.11 Standard.

*1 To access the Power Options, click Start → Control Panel → System

and Security → Power Options.

eco button Press this button to launch the TOSHBIA eco

Utility. This button changes "On" and "Off" of eco
Mode. When eco Mode is "On", the icon turns
green. When eco Mode is "Off", the icon turns
gray.

Programmable
button

The configuration of this button may vary,
depending on the model you purchased and the
region you are in.

Hot keys Hot keys are specific key combinations that let

you quickly change the system configuration
directly from the keyboard without running a
system program.

Display automatic
power off

*1

This feature automatically cuts off power to the
computer's display panel when there is no
keyboard input for a specified time, with power
being restored the next time a key is pressed.
This can be specified in the Power Options.

HDD automatic
power off

User’s Manual 3-9

*1

This feature automatically cuts off power to the
hard disk drive when it is not accessed for a
specified time, with power being restored when
the hard disk drive is next accessed. This can be
specified in the Power Options.

Hardware, Utilities and Options

System automatic
Sleep/Hibernation

Mode

*1

This feature automatically shuts down the system
into either Sleep Mode or Hibernation Mode when
there is no input or hardware access for a
specified time. This can be specified in the Power
Options.

Power on password Two levels of password security, supervisor and

user, are available to prevent unauthorized
access to your computer.

Instant security A specific hot key function automatically locks the

system providing data security.

Intelligent power
supply

*1

A microprocessor in the computer's intelligent
power supply detects the battery's charge,
automatically calculates the remaining battery
capacity and protects electronic components
from abnormal conditions such as a voltage
overload from the AC adaptor. This can be
specified in the Power Options.

*1

Battery save mode

This feature lets you configure the computer in
order to save battery power. This can be
specified in the Power Options.

Panel power on/off

*1

Low battery
automatic

Hibernation Mode

Heat dispersal

*1

This feature automatically turns power to the
computer off when the display panel is closed,
and turns it back on when the display panel is
opened. This can be specified in the Power
Options.

When battery power is exhausted to the point that
computer operation cannot be continued, the

*1

system automatically enters Hibernation Mode
and shuts itself down. This can be specified in the
Power Options.

To protect from overheating, the CPU has an
internal temperature sensor. If the computer’s
internal temperature rises to a certain level, the
cooling fan is turned on or the processing speed
is lowered. This can be specified in the Power
Options.

Maximum Turns on the fan first, then
Performance lowers the CPU processing

speed if necessary.

Battery Lowers the CPU processing
Optimized speed first, then turns on the

fan if necessary.

User’s Manual 3-10

Hardware, Utilities and Options

If the processor's temperature reaches an unacceptably high level with
either setting, the computer will automatically shut down to prevent any
damage - in this instance any unsaved data in memory will be lost.

TOSHIBA HDD
Protection

This feature uses the acceleration sensor built in
the computer to detect vibration and shocks, and
automatically moves the hard disk drive's
read/write head to a safe position in order to
reduce the risk of damage that could be caused
by head-to-disk contact. Refer to the Using the

Hard Disk Drive (HDD) Protection section in

Chapter 4, Operating Basics, for more details.

■ The TOSHIBA HDD Protection function does not guarantee that the

hard disk drive will not be damaged.

■ TOSHIBA HDD Protection cannot be used in models that are equipped

with SSD.

Hibernation Mode This feature lets you turn off the power to the

computer without exiting from your software. The
contents of main memory are automatically
saved to the hard disk drive so that when you
next turn the power on again, you can continue
working right where you left off. Refer to the

Turning off the power section in Chapter 1,

Getting Started, for more details.

Sleep Mode If you have to interrupt your work, you can use

this feature to allow you to turn off power to the
computer without exiting from your software.
Data is maintained in the computer's main
memory so that when you next turn on the power,
you can continue working right where you left off.

Sleep and Charge
function

This feature allows you to charge USB­compatible external devices such as mobile
phones or portable digital music players via the
USB port when your computer is in Sleep Mode,
Hibernation Mode or in the shutdown state.

This function is worked by the TOSHIBA Sleep
Utility. For more information, please refer to the

Using the TOSHIBA Sleep Utility section in

Chapter 4, Operating Basics.

User’s Manual 3-11

Hardware, Utilities and Options

Sleep and Music
function

USB Wakeup
function

TOSHIBA PC Health
Monitor

This new audio feature allows you to play audio
sounds from compatible external devices such as
digital music players on the computer's internal
speakers via the microphone jack when your
computer is in Sleep Mode, Hibernation Mode or
in the shutdown state.

This function is worked by the TOSHIBA Sleep
Utility. For more information, please refer to the

Using the TOSHIBA Sleep Utility section in

Chapter 4, Operating Basics.

This function restores the computer from Sleep
Mode depending on the external devices
connected to the USB ports.

For example, if a mouse or USB keyboard is
connected to a USB port, moving the
mouse/keyboard will wakeup the computer.

The "USB Wakeup function" operates under
Windows 7 operating system and it works for all
USB ports.

The TOSHIBA PC Health Monitor application
proactively monitors a number of system
functions such as power consumption, battery
health and system cooling, informing you of
significant system conditions. This application
recognizes the system and individual component
serial numbers and will track specific activities
related to their usage.

Refer to Appendix F, TOSHIBA PC Health

Monitor.

TOSHIBA Value Added Package

This section describes the TOSHIBA Component features pre-installed on
the computer.

TOSHIBA Power
Saver

TOSHIBA Button
Support

TOSHIBA Power Saver provides you with the
features of more various power supply
managements.

This utility controls the following computer button
functions.

■ eco button

■ Programmable button

The starting application from the button can be
changed.

User’s Manual 3-12

Hardware, Utilities and Options

TOSHIBA Button Support cannot be used in models that are not equipped
with eco button and Programmable button.

TOSHIBA Zooming
Utility

This utility allows you to enlarge or reduce the
icon size on the Windows Desktop, or the zoom
factor associated with specific supported
applications.

TOSHIBA PC
Diagnostic Tool

The TOSHIBA PC Diagnostic Tool will display
basic system configuration information and allow
the functionality of some of the computer's built­in hardware devices to be tested.

TOSHIBA Password
Utility

The TOSHIBA Password utility allows you to set
a password in order to restrict access to the
computer.

TOSHIBA Flash
Cards

The TOSHIBA Flash Cards provide a quick way
to modify selected system functions and to
launch applications.

■ Hot key function

■ TOSHIBA utility launcher function

HW Setup This utility allows you to customize your

hardware settings according to the way you work
with the computer and the peripherals you use.

TOSHIBA
Accessibility

The TOSHIBA Accessibility utility provides
support to movement impaired users when they
need to use the TOSHIBA Hot-key functions. In
use, the utility allows you to make the FN key
'sticky', that is you can press it once, release it,
and they press one of the 'Function' keys in
order to access its specific function. When set,
the FN key will remain active until another key is
pressed.

User’s Manual 3-13

Utilities and Applications

This section describes the pre-installed utilities that come with the
computer and details how to start them. For further information on their
operation, please refer to each utility's online manual, help files or
README.TXT file.

Depending on the model you purchased, you may not have all the utilities
or applications listed below.

Fingerprint Utility This product has a fingerprint utility installed for

Hardware, Utilities and Options

the purpose of enrolling and recognizing
fingerprints which can then be linked to a
username and password in order to remove the
need to input these details from the keyboard.
Just by swiping an enrolled finger against the
fingerprint sensor, the following functions will be
enabled:

■ Logon to Windows and access a security

enabled homepage through Internet Explorer.

■ Files and folders can be encrypted/decrypted

and third party access to them is prevented.

■ Disable the password-protected screen-saver

when returning from a power-saving mode
such as Sleep Mode.

■ Authentication of the User Password (and, if

applicable, the HDD(Hard Disk Drive)
Password) when booting up the computer
(Power-on Security).

■ Single Sign-on feature

Fingerprint security cannot be used in models that do not have a fingerprint
module installed.

TOSHIBA Face
Recognition

TOSHIBA Face Recognition uses a face
verification library to verify the face data of users
when they log in to Windows. If the verification is
successful, the user will be logged into Windows
automatically. The user can thus avoid having to
enter a password or the like, which makes the
login process easier.

TOSHIBA DVD
PLAYER

User’s Manual 3-14

This software is provided for playback of DVD­Video.

It has an on-screen interface and functions. Click

Start → All Programs → TOSHIBA DVD
PLAYER → TOSHIBA DVD PLAYER.

For details on how to use TOSHIBA DVD
PLAYER, see the help file.

Hardware, Utilities and Options

■ Frame dropping, audio skipping or out of synch audio and video may

occur during playback of some DVD-Video Disc titles.

■ Make sure to connect the computer's AC adaptor when playing a DVD-

Video. Power-saving features may interfere with smooth playback.

■ If you see the screen blinking while playing DVD with subtitle on at

Media Player, please use TOSHIBA DVD PLAYER or Media Center to
play DVD.

Bluetooth Stack for
Windows by Toshiba

This software enables communication between
the computer and external Bluetooth devices
such as printers and mobile phones.

Bluetooth functions cannot be used in models that do not have a Bluetooth
module installed.

TOSHIBA Assist TOSHIBA Assist is a graphical user interface that

provides access to specific tools, utilities and
applications that make the use and configuration
of the computer easier.

TOSHIBA ConfigFree TOSHIBA ConfigFree is a suite of utilities that

improve the ease and control of communication
devices and network connections, help in the
identification of communication problems and
allow the creation of profiles if you need to switch
between different locations and communication
networks. To access this utility, click Start → All

Programs → TOSHIBA → ConfigFree.

TOSHIBA eco Utility This PC is equipped with "eco mode". This mode

slightly lowers performance of some devices to
reduce electric power consumption. You can
realize measurable power savings by using it
continuously. TOSHIBA eco Utility helps you
monitor your power savings by showing
approximate real time power consumption.
Furthermore, it shows approximate accumulated
power consumption and approximate
accumulated power savings when using eco
mode daily, weekly, and monthly. You can track
power savings by using eco mode continuously.

User’s Manual 3-15

Hardware, Utilities and Options

TOSHIBA Disc
Creator

TOSHIBA DVD-RAM
Utility

Corel DVD
MovieFactory for
TOSHIBA

You can create CD's and DVD's in a number of
formats including audio CD's that can be played
on a standard CD player, and data CD's/DVD's
which can store copies of the files and folders on
your computer's hard disk drive. This software
can be used on models with a DVD Super Multi
drive.

To start this utility, click Start → All Programs →

TOSHIBA → CD&DVD Applications → Disc
Creator.

This utility has the function of Physical Format
and Write-Protect to DVD-RAM. This utility is
contained the setup module of TOSHIBA Disc
Creator. To start this utility, click Start → All

Programs → TOSHIBA → CD&DVD
Applications → DVD-RAM Utility.

Corel DVD MovieFactory for TOSHIBA allows
users to instantly create Blu-ray disc movie,
DVD-Video or slideshow discs via a user-friendly
wizard interface with specific task oriented
features.

The Labelflash

TM

feature is also supported which
allows text and images to be printed on the label
surface of Labelflash compatible media without
using a printer. Some models supports the
Labelflash function.

This application may not be installed depending
on the model which you purchased.

Corel Label@Once Label@Once allows users to design and print the

label of discs.
The LabelflashTM feature is also supported which

allows text and images to be printed on the label
surface of Labelflash compatible media without
using a printer.

This application is the feature of DVD
MovieFactory in some models.

For more information, please refer to the When

Using Corel DVD MovieFactory for TOSHIBA

section in Chapter 4, Operating Basics.

User’s Manual 3-16

Hardware, Utilities and Options

The Labelflash™ features cannot be used in models that do not have a
DVD Super Multi /BD-Combo/BD-Writer drive with Labelflash.

In order to determine if the optical disc drive installed in your computer
supports Labelflash follow the steps as detailed below:

1. Launch Corel Label@Once (the operation varies depending on the
models you purchased):

■ Click Start → All Programs → DVD MovieFactory for TOSHIBA

→ DVD MovieFactory Launcher. Click Create Disc Label.

■ Click Start → All Programs → Corel Label@Once → Corel

Label@Once.

2. Click the General tab.

3. Choose optical disc drive for Printer.

If the drive name is displayed in Step 3, your computer's optical disc drive
supports Labelflash.

TOSHIBA Bulletin
Board

Bulletin Board is a convenient place to pin things
to visually organize in a fun and creative way.

Simply drag and drop your favorite pictures, files
or notes to pin them on the Board. You can use it
to create thumbnail shortcuts, reminders, to-do
list and so on according to your personal style.

To access this utility, click Start → All Programs

→ TOSHIBA → TOSHIBA Bulletin Board.

TOSHIBA ReelTime This application is a graphical history/indexing

tool that enables you to view recently accessed
files in a fun and easy-to-use format. View and
scroll through your history of opened or imported
files via thumbnails in an intuitive user interface.

To access this utility, click Start → All Programs

→ TOSHIBA → TOSHIBA ReelTime.

TOSHIBA Media
Controller

This application allows you to control your music,
pictures and videos by streaming content to any
compatible device in your home.

To access this utility, click Start → All Programs

→ TOSHIBA → TOSHIBA Media Controller →
TOSHIBA Media Controller.

User’s Manual 3-17

For more information, please refer to the
TOSHIBA Media Controller Help.

Hardware, Utilities and Options

TOSHIBA Speech
System

WinDVD BD for
TOSHIBA

TOSHIBA HDD/SSD
Alert Utility

The TOSHIBA Speech System consists of a
voice-composition application (text-to-speech)
that analyzes documents and reads them aloud,
and a speech-recognition application that
recognizes the words you speak into a
microphone. This allows you to control and
operate various Windows programs by voice
command rather than using the keyboard or a
mouse.

To access this utility, click Start → All Programs
→ TOSHIBA → Speech System.

For more information, please refer to the
TOSHIBA Speech System Help.

This software is provided for playback of Blu-ray
Disc. It has an on-screen interface and functions.
Click Start → All Programs → Corel → Corel
WinDVD BD.

This utility includes wizard functions to monitor
the Disk Drive operating status and execute the
system backup.

TOSHIBA Service
Station

TOSHIBA Sleep
Utility

To access the utility, click Start → All Programs
→ TOSHIBA → Utilities → HDD SSD Alert.

This application allows your computer to
automatically search for TOSHIBA software
updates or other alerts from TOSHIBA that are
specific to your computer system and its
programs. When enabled, this application
periodically transmits to our servers a limited
amount of system information, which will be
treated in strict accordance with the rules and
regulations as well as applicable data protection
law.

To access this utility, click Start → All Programs
→ TOSHIBA → Utilities → Service Station

.

This utility is able to either enable or disable the
Sleep and Charge and the Sleep and Music
functions.

To start this utility, click Start → All Programs →
TOSHIBA → Utilities → Sleep Utilities.

User’s Manual 3-18

Optional devices

Optional devices can expand the computer's capabilities and its versatility.
This section describes the connection or installation of the following
devices:

Cards/memory

■ ExpressCard

■ Bridge media slot

■ Secure Digital™ (SD) Card (SD memory card, SDHC memory card,

SDXC memory card, miniSD Card, microSD Card)

■ Memory Stick (Memory Stick, Memory Stick PRO, Memory Stick

Duo, Memory Stick PRO Duo, Memory Stick Micro)

■ xD picture card

■ MultiMediaCard

■ Additional memory module

Peripheral devices

Hardware, Utilities and Options

■ Hard disk drive pack

■ External monitor

■ Television via HDMI

■ USB FDD Kit

eSATA

Other

■ Security lock

ExpressCard

The computer is equipped with a single ExpressCard slot into which any
ExpressCard device that meets industry standards, either manufactured by
TOSHIBA or another vendor, can be installed. The slot supports hot plug
connection and utilizes the PCI Express interface that supports the reading
and writing of data at a theoretical maximum rate of 2.5Gbps.

Inserting an ExpressCard

The Windows hot-install feature allows you to insert ExpressCards while
the computer is turned on.

Do not insert an ExpressCard while the computer is in Sleep Mode or
Hibernation Mode as you may find that some cards do not work properly.

To insert an ExpressCard, follow the steps as detailed below:

1. Press the Dummy card in order to eject the Dummy card partially out of
the computer.

2. Grasp the Dummy card and draw it.

User’s Manual 3-19

Hardware, Utilities and Options

3. Insert the ExpressCard into the ExpressCard slot on the side of the
computer.

4. Press the ExpressCard gently to ensure a firm connection is made.

1

2

1. ExpressCard slot

Figure 3-1 Inserting the ExpressCard

2. ExpressCard

5. After inserting the ExpressCard you should refer to its documentation
and also check the configuration in Windows in order to ensure that it is
correct.

Removing an ExpressCard

To remove an ExpressCard, follow the steps as detailed below.

1. Open the Safely Remove Hardware and Eject Media icon on the
Windows Taskbar.

2. Point to ExpressCard and click the left Touch Pad control button.

3. Press the ExpressCard in order to eject the ExpressCard partially out of
the computer.

4. Grasp the ExpressCard and remove it.

1. ExpressCard

5. Insert the Dummy card into the ExpressCard slot.

When you do not use an ExpressCard, please be sure to insert a Dummy
card.

User’s Manual 3-20

1

Figure 3-2 Removing the ExpressCard

Bridge media slot

The computer is equipped with a Bridge media slot that can accommodate
some kinds of memory media with various memory capacities so that you
can easily transfer data from devices, such as digital cameras and
Personal Digital Assistants.

■ Keep foreign objects out of the Bridge media slot. Never allow metal

objects, such as screws, staples and paper clips, to enter the computer
or Keyboard. Foreign metal objects can create a short circuit, which
can cause computer damage and fire, possibly resulting in serious
injury.

■ Memory Stick Duo is not compatible with the Bridge media slot. Do not

insert Memory Stick Duo into the slot or you may not be able to remove
it. Data may be lost or damaged if you use any memory media other
than those supported.

■ This Bridge media slot supports the following memory media.

Hardware, Utilities and Options

■ Secure Digital (SD) Card (SD memory card, SDHC memory card,

SDXC memory card, miniSD Card, microSD Card)

■ Memory Stick (Memory Stick, Memory Stick PRO, Memory Stick

Duo, Memory Stick PRO Duo, Memory Stick Micro)

■ xD picture card

■ MultiMediaCard (MMC™)

■ Please note that an adaptor is required to use miniSD/microSD Card.

■ Please note that an adaptor is required to use Memory Stick PRO Duo.

■ Please note that not all memory media have been tested and verified to

work correctly. Therefore, it is not possible to guarantee that all
memory media will operate properly.

■ The slot does not support CF or SmartMedia cards, or Magic Gate

functions.

Secure Digital (SD) Card

microSD card adaptor and microSD card

Memory Stick

User’s Manual 3-21

xD picture card

Figure 3-3 Examples of memory media

MultiMediaCard
(MMC)

Memory media

This section provides the important safety precautions in order to handle
your memory media.

Points to note about the SD/SDHC/SDXC memory card

SD/SDHC/SDXC memory cards comply with SDMI (Secure Digital Music
Initiative), which is a technology adopted to prevent unlawful copy or
playback of digital music. For this reason, you cannot copy or playback
protected material on another computer or other device, and you may not
reproduce any copyrighted material except for your personal enjoyment.

Below is a simple explanation for distinguishing SD memory cards from
SDHC and SDXC memory cards.

■ SD, SDHC and SDXC memory cards appear the same externally.

However, the logo on SD, SDHC and SDXC memory cards is different,
so pay careful attention to the logo when purchasing.

■ The SD memory card logo is ( ).

Hardware, Utilities and Options

■ The SDHC memory card logo is ( ).

■ The SDXC memory card logo is ( ).

■ The maximum capacity of SD memory cards is 2GB. The maximum

capacity of SDHC memory cards is 32GB.

Card Type Capacities

SD 8MB, 16MB, 32MB, 64MB, 128MB, 256MB,

512MB, 1GB, 2GB

SDHC 4GB, 8GB, 16GB, 32GB

SDXC 64GB

Memory media format

New media cards are formatted according to specific standards. If you wish
to reformat a media card, be sure to do so with a device that uses media
cards.

Formatting an SD/SDHC/SDXC memory card

SD/SDHC/SDXC memory cards are sold already formatted in conformity to
specific standards. If you reformat an SD/SDHC/SDXC memory card, be
sure to reformat it with a device such as digital camera or digital audio
player that uses the SD/SDHC/SDXC memory cards, not with the format
command provided within Windows.

Should you need to format all areas of the memory card,including the
protected area,you will need to obtain an appropriate application that
applies the copy protection system.

User’s Manual 3-22

Media care

Observe the following precautions when handling the card.

Card care

■ Do not twist or bend cards.

■ Do not expose cards to liquids or store in humid areas or lay media

close to containers of liquid.

■ Do not touch the metal part of a card or expose it to liquids or let it get

dirty.

■ After using card, return it to its case.

■ The card is designed so that it can be inserted only one way. Do not try

to force the card into the slot.

■ Do not leave a card partially inserted in the slot. Press the card until you

hear it click into place.

Memory card care

■ Set the write-protect switch to the lock position, if you do not want to

record data.

Hardware, Utilities and Options

■ Memory cards have a limited lifespan, so it is important to backup

important data.

■ Do not write to a card if the battery power is low. Low power could affect

writing accuracy.

■ Do not remove a card while read/write is in progress.

For more details on using memory cards, see manuals accompanying the
cards.

About the write-protect

The following memory media have a function for protect.

■ SD Card (SD memory card, SDHC memory card, SDXC memory card)

■ Memory Stick (Memory Stick, Memory Stick PRO, Memory Stick Duo,

Memory Stick PRO Duo, Memory Stick Micro)

■ MultiMediaCard (MMC)

Set the write-protect switch to the lock position, if you do not want to record
data.

Inserting a memory media

The following instructions apply to all types of supported media devices. To
insert a memory media, follow the steps as detailed below:

1. Turn the memory media so that the contacts (metal areas) are face
down.

2. Insert the memory media into the Bridge media slot on the front of the
computer.

User’s Manual 3-23

Hardware, Utilities and Options

3. Press the memory media gently to ensure a firm connection is made.

1

2

1. Bridge media slot

Figure 3-4 Inserting a memory media

■ Make sure memory media is oriented properly before you insert it. If

you insert the media in wrong direction, you may not be able to remove
it.

■ When inserting memory media, do not touch the metal contacts. You

could expose the storage area to static electricity, which can destroy
data.

■ Do not turn the computer off or switch to Sleep Mode or Hibernation

Mode while files are being copied - doing so may cause data to be lost.

Removing a memory media

The following instructions apply to all types of supported media devices. To
remove a memory media, follow the steps as detailed below:

1. Open the Safely Remove Hardware and Eject Media icon on the
Windows Taskbar.

2. Point to memory media and click the left Touch Pad control button.

3. Press the memory media to partially extend it out of the computer.

2. Memory media

4. Grasp the media and remove it.

1. Bridge media slot

User’s Manual 3-24

1

2

2. Memory media

Figure 3-5 Removing memory media

■ Make sure the Bridge Media slot indicator is out before you remove

the memory media or turn off the computer’s power. If you remove the
memory media or turn off the power while the computer is accessing
the memory media, you may lose data or damage the media.

■ Do not remove the memory media while the computer is in Sleep or

Hibernation Mode. The computer could become unstable or data in the
memory media could be lost.

■ Do not remove only the miniSD/microSD Card while leaving the

adaptor in the Bridge Media slot.

Additional memory module

You can install additional memory into the computer in order to increase the
amount of system memory that is available. This section describes how to
install and remove optional memory modules.

■ You should place a mat beneath the computer in order to prevent the

computer's lid from becoming scratched or damaged when you are
installing/replacing the memory module. In this instance you should
avoid mats that are made of materials that hold or generate static
electricity.

Hardware, Utilities and Options

■ When installing or removing a memory module, you must ensure that

you do not touch any other internal areas of the computer.

■ Insert the two memory modules into Slot A and Slot B respectively. The

computer will operate in dual channel mode.
You can access the inserted memory modules efficiently in dual
channel.

■ Use only memory modules approved by TOSHIBA.

■ Do not try to install or remove a memory module under the following

conditions.
a. The computer is turned on.
b. The computer was shut down in either Sleep or Hibernation Mode.
c. Wake-up on LAN is enabled.
d. The wireless communication switch is turned on.

■ Be careful not to let screws or other foreign matter fall into the

computer. It could cause malfunction or electric shock.

■ Additional memory module is a precision electronic component that

may be fatally damaged by static electricity. Since the human body can
carry static electricity, it is important that you discharge yourself before
touching or installing any additional memory modules. To discharge
your body’s static electricity, simply touch any metal close to you with
bare hands.

User’s Manual 3-25