Toshiba Satellite M110, Satellite Pro M110 User Manual
TOSHIBA
Satellite M110/
Satellite Pro M110
Portable Personal Computer
User’s Manual
ii
Copyright
© 2006 by TOSHIBA Corporation. All rights reserved. Under the copyright
laws, this manual cannot be reproduced in any form without the prior written
permission of TOSHIBA. No patent liability is assumed, with respect to the use
of the information contained herein.
TOSHIBA Satellite M110/Satellite Pro M110 Portable Personal Computer
User’s Manual
First edition September 2006
Copyright authority for music, movies, computer programs, data bases and other
intellectual property covered by copyright laws belongs to the author or to the
copyright owner. Copyrighted material can be reproduced only for personal use or
use within the home. Any other use beyond that stipulated above (including conversion to digital format, alteration, transfer of copied material and distribution on
a network) without the permission of the copyright owner is a violation of copyright or author’s rights and is subject to civil damages or criminal action. Please
comply with copyright laws in making any reproduction from this manual.
Disclaimer
This manual has been validated and reviewed for accuracy. The instructions and
descriptions it contains are accurate for the TOSHIBA Satellite M110/Satellite
Pro M110 Portable Personal Computer at the time of this manual’s production.
However, succeeding computers and manuals are subject to change without
notice. TOSHIBA assumes no liability for damages incurred directly or indirectly from errors, omissions or discrepancies between the computer and the
manual.
Trademarks
IBM is a registered trademark, and IBM PC and PS/2 are trademarks of International Business Machines Corporation.
Intel, Intel SpeedStep and Intel Core and Centrino are trademarks or registered
trademarks of Intel Corporation or its subsidiaries in the United States and other
countries/regions.
Windows and Microsoft are registered trademarks of Microsoft Corporation.
Photo CD is a trademark of Eastman Kodak.
Memory Stick is a registered trademark and i.LINK is a trademark of SonyCorporation.
TruSurround XT, WOW HD, Circle Surround Xtract, SRS and symbol are
trademarks of SRS Labs, Inc.
iii
TruSurround XT, WOW HD, Circle Surround Xtract, TruBass, SRS 3D, Definition and FOCUS technologies are incorporated under license from SRS Labs,
Inc.
InterVideo and WinDVD are registered trademarks of the InterVideo Inc.
WinDVD Creator is trademarks of the InterVideo Inc.
Other trademarks and registered trademarks not listed above may be used in this
manual.
Macrovision License of Notice
This product incorporates copyright protection technology that is protected by
methods and claims of certain U.S. patents and other intellectual rights owned by
Macrovision Corporation, and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended
for home and other limited viewing uses only unless authorized by Macrovision
Corporation. Reverse engineering of disassembly is prohibited.
Safety Instructions
Use the following safety guidelines to help protect yourself and your computer.
When using your computer
CAUTION: Do not operate your portable computer for an extended
period of time with the base resting directly on your body. With extended
operation, heat can potentially build up in the base. Allowing sustained
contact with the skin could cause discomfort or, eventually, a burn.
❑ Do not attempt to service the computer yourself. Always follow installation
instructions closely.
❑ Do not carry a battery in your pocket, purse, or other container where metal
objects (such as car keys) could short-circuit the battery terminals. The
resulting excessive current follow can cause extremely high temperatures
and may result in damage from burns.
❑ Be sure that noting rests on your AC adapter’s power cable and that the
cable is not located where it can be tripped over or stepped on.
❑ Place the AC adapter in a ventilated area, such as a desk top or on the floor,
when you use it to run the computer or to charge the battery. Do not cover
the AC adapter with papers or other items that will reduce cooling; also, do
not use the AC adapter while it is inside a carrying case.
iv
❑ Use only the AC adapter and batteries that are approved for use with this
computer. Use of another type of battery or AC adapter may risk fire or
explosion.
❑ Before you connect the computer to a power source, ensure that the voltage
rating of the AC adapter matches that of the available power source. 115 V/
60 Hz in most of North and South America and some Far Eastern countries
such as Taiwan. 100 V/50 Hz in eastern Japan and 100 V/60 Hz in western
Japan. 230 V/50 Hz in most of Europe, the Middle East, and the Far East.
❑ If you use an extension cable with your AC adapter, ensure that the total
ampere rating of the products plugged in to the extension cable does not
exceed the ampere rating of the extension cable.
❑ To remove power from the computer, turn it off, remove the battery, and dis-
connect the AC adapter from the electrical outlet.
❑ To help avoid the potential hazard of electric shock, do not connect or dis-
connect any cables or perform maintenance or reconfiguration of this product during an electrical storm.
❑ When setting up the computer for work, place it on a level surface.
FCC information
Product Name:Satellite M110/Satellite Pro M110
Model number:PSMB6X/PSMB7X
FCC notice “Declaration of Conformity Information”
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
❑ Reorient or relocate the receiving antenna.
❑ Increase the separation between the equipment and receiver.
v
❑ Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
❑ Consult the dealer or an experienced radio/TV technician for help.
WARNING: Only peripherals complying with the FCC class B limits may
be attached to this equipment. Operation with non-compliant peripherals
or peripherals not recommended by TOSHIBA is likely to result in interference to radio and TV reception. Shielded cables must be used between
the external devices and the computer’s external monitor port, USB port,
serial port, parallel port, PS/2 mouse/keyboard port and microphone
jack. Changes or modifications made to this equipment, not expressly
approved by TOSHIBA or parties authorized by TOSHIBA could void the
user’s authority to operate the equipment.
FCC conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference
that may cause undesired operation.
Contact
Address: TOSHIBA America Information Systems, Inc.
9740 Irvine Boulevard
Irvine, California 92618-1697
Telephone: (949) 583-3000
vi
BSMI Notice (Taiwan Only)
EU Declaration of Conformity
TOSHIBA declares, that the product: Satellite M110/Satellite Pro M110 conforms to the following Standards:
Supplementary Information: “The product complies with the requirements
of the Low Voltage Directive 73/23/EEC, the
EMC Directive 89/336/EEC and/or the
R&TTE Directive 1999/05/EEC.”
This product is carrying the CE-Mark in accordance with the related European
Directives. Responsible for CE-Marking is TOSHIBA Europe, Hammfelddamm
8, 41460 Neuss, Germany.
VCCI Class B Information
Canadian Regulatory Information
(Canada Only)
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the Radio Interference Regulation of the
Canadian Department of Communications.
Note that Canadian Department of Communications (DOC) regulations provide,
that changes or modifications not expressly approved by TOSHIBA Corporation
could void your authority to operate this equipment.
vii
This Class B digital apparatus meets all requirements of the Canadian Interference-Causng Equipment Regulations.
Cet appareil numérique de la class B respecte toutes les exgences du Règlement
sur le matériel brouileur du Canada.
Modem Warning Notice
Conformity Statement
The equipment has been approved to [Commission Decision “CTR21”] for panEuropean single terminal connection to the Public Switched Telephone Network
(PSTN).
However, due to differences between the individual PSTNs provided in different
countries/regions the approval does not, of itself, give an unconditional assurance of successful operation on every PSTN network termination point.
In the event of problems, you should contact your equipment supplier in the first
instance.
Network Compatibility Statement
This product is designed to work with, and is compatible with the following networks. It has been tested to and found to conform with the additional requirements conditional in EG 201 121.
Germany ATAAB AN005,AN006,AN007,AN009,AN010 and
DE03,04,05,08,09,12,14,17
Greece ATAAB AN005,AN006 and GR01,02,03,04
Portugal ATAAB AN001,005,006,007,011 and P03,04,08,10
Spain ATAAB AN005,007,012, and ES01
Switzerland ATAAB AN002
All other countries/region ATAAB AN003,004
Specific switch settings or software setup are required for each network, please
refer to the relevant sections of the user guide for more details.
The hookflash (timed break register recall) function is subject to separate
national type approvals. It has not been tested for conformity to national type
regulations, and no guarantee of successful operation of that specific function on
specific national networks can be given.
viii
Japan regulations
Region selection
If you are using the computer in Japan, technical regulations described in the
Telecommunications Business Law require that you select the Japan region
mode. It is illegal to use the modem in Japan with any other selection.
Redial
Up to two redial attempts can be made. If more than two redial attempts are
made, the modem will return
Black Listed
. If you are experiencing problems
with the Black Listed code, set the interval between redials at one minute or
longer.
Japan’s Telecommunications Business Law permits up to two redials on analogue telephones, but the redials must be made within a total of three minutes.
The internal modem is approved by Japan Approvals Institute for Telecommunications Equipment.
A05-0413001
Pursuant to FCC CFR 47, Part 68:
When you are ready to install or use the modem, call your local telephone company and give them the following information:
❑ The telephone number of the line to which you will connect the modem
❑ The registration number that is located on the device
The FCC registration number of the modem will be found on either the
device which is to be installed, or, if already installed, on the bottom of the
computer outside of the main system label.
❑ The Ringer Equivalence Number (REN) of the modem, which can vary. For
the REN of your modem, refer to your modem’s label.
The modem connects to the telephone line by means of a standard jack called the
US:AGSMD01BDELPHI.
Type of service
Your modem is designed to be used on standard-device telephone lines. Connection to telephone company-provided coin service (central office implemented
systems) is prohibited. Connection to party lines service is subject to state tariffs.
ix
If you have any questions about your telephone line, such as how many pieces of
equipment you can connect to it, the telephone company will provide this information upon request.
Telephone company procedures
The goal of the telephone company is to provide you with the best service it can.
In order to do this, it may occasionally be necessary for them to make changes in
their equipment, operations, or procedures. If these changes might affect your
service or the operation of your equipment, the telephone company will give you
notice in writing to allow you to make any changes necessary to maintain uninterrupted service.
If problems arise
If any of your telephone equipment is not operating properly, you should immediately remove it from your telephone line, as it may cause harm to the telephone
network. If the telephone company notes a problem, they may temporarily discontinue service. When practical, they will notify you in advance of this disconnection. If advance notice is not feasible, you will be notified as soon as possible.
When you are notified, you will be given the opportunity to correct the problem
and informed of your right to file a complaint with the FCC. In the event repairs
are ever needed on your modem, they should be performed by TOSHIBA Corporation or an authorized representative of TOSHIBA Corporation.
Disconnection
If you should ever decide to permanently disconnect your modem from its
present line, please call the telephone company and let them know of this change.
Fax branding
The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device to send any message via a telephone fax machine unless such message clearly contains in a margin at the top or
bottom of each transmitted page or on the first page of the transmission, the date
and time it is sent and an identification of the business, other entity or individual
sending the message and the telephone number of the sending machine or such
business, other entity or individual. In order to program this information into
your fax modem, you should complete the setup of your fax software before
sending messages.
x
Instructions for IC CS-03 certified equipment
1 The Industry Canada label identifies certified equipment. This certification
means that the equipment meets certain telecommunications network protective, operational and safety requirements as prescribed in the appropriate
Terminal Equipment Technical Requirements document(s). The Department
does not guarantee the equipment will operate to the user’s satisfaction.
Before installing this equipment, users should ensure that it is permissible to
be connected to the facilities of the local telecommunications company. The
equipment must also be installed using an acceptable method of connection.
The customer should be aware that compliance with the above conditions
may not prevent degradation of service in some situations. Repairs to certified equipment should be coordinated by a representative designated by the
supplier. Any repairs or alterations made by the user to this equipment, or
equipment malfunctions, may give the telecommunications company cause
to request the user to disconnect the equipment.
Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines and internal metallic water pipe
system, if present, are connected together. This precaution may be particularly important in rural areas.
CAUTION: Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection authority, or
electrician, as appropriate.
2 The user manual of analog equipment must contain the equipment’s Ringer
Equivalence Number (REN) and an explanation notice similar to the following:
The Ringer Equivalence Number (REN) of the modem, which can vary. For
the REN of your modem, refer to your modem’s label.
NOTICE: The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of the maximum number of terminals
allowed to be connected to a telephone interface. The termination on an
interface may consist of any combination of devices subject only to the
requirement that the sum of the Ringer Equivalence Numbers of all the
devices does not exceed 5.
3 The standard connecting arrangement (telephone jack type) for this equip-
ment is jack type(s): US:AGSMDO1BATHENS.
The IC registration number of the modem is shown below.
Canada: 4005B-DELPHI
xi
Notes for Users in Australia and New Zealand
Modem warning notice for Australia
Modems connected to the Australian telecoms network must have a valid Austel
permit. This modem has been designed to specifically configure to ensure compliance with Austel standards when the country/region selection is set to Australia. The use of other country/region setting while the modem is attached to the
Australian PSTN would result in you modem being operated in a non-compliant
manner. To verify that the country/region is correctly set, enter the command ATI
which displays the currently active setting.
To set the country/region permanently to Australia, enter the following command
sequence:
AT%TE=1
ATS133=1
AT &F
AT &W
AT%TE=0
AT Z
Failure to set the modem to the Australia country/region setting as shown above
will result in the modem being operated in a non-compliant manner. Consequently, there would be no permit in force for this equipment and the Telecoms
Act 1991 prescribes a penalty of $12,000 for the connection of non-permitted
equipment.
Notes for use of this device in New Zealand
❑ The grant of a Telepermit for a device in no way indicates Telecom accep-
tance of responsibility for the correct operation of that device under all operating conditions. In particular the higher speeds at which this modem is
capable of operating depend on a specific network implementation which is
only one of many ways of delivering high quality voice telephony to customers. Failure to operate should not be reported as a fault to Telecom.
❑ In addition to satisfactory line conditions a modem can only work properly
if:
(a) it is compatible with the modem at the other end of the call and
(b) the application using the modem is compatible with the application at
the other end of the call - e.g., accessing the Internet requires suitable
software in addition to a modem.
❑ This equipment shall not be used in any manner which could constitute a
nuisance to other Telecom customers.
xii
❑ Some parameters required for compliance with Telecom’s PTC Specifica-
tions are dependent on the equipment (PC) associated with this modem. The
associated equipment shall be set to operate within the following limits for
compliance with Telecom Specifications:
(a) There shall be no more than 10 call attempts to the same number within
any 30 minute period for any single manual call initiation, and
(b) The equipment shall go on-hook for a period of not less than 30 seconds
between the end of one attempt and the beginning of the next.
(c) Automatic calls to different numbers shall be not less than 5 seconds
apart.
❑ Immediately disconnect this equipment should it become physically dam-
aged, and arrange for its disposal or repair.
❑ The correct settings for use with this modem in New Zealand are as follows:
ATB0 (CCITT operation)
AT&G2 (1800 Hz guard tone)
AT&P1 (Decadic dialing make-break ratio = 33%/67%)
ATS0=0 (not auto answer)
ATS10=less than 150 (loss of carrier to hangup delay, factory default of 15
recommended)
ATS11=90 (DTMF dialing on/off duration=90 ms)
ATX2 (Dial tone detect, but not (U.S.A.) call progress detect)
❑ When used in the Auto Answer mode, the S0 register must be set with a
value of 3 or 4. This ensures:
(a) a person calling your modem will hear a short burst of ringing before
the modem answers. This confirms that the call has been successfully
switched through the network.
(b) caller identification information (which occurs between the first and
second ring cadences) is not destroyed.
❑ The preferred method of dialing is to use DTMF tones (ATDT...) as this is
faster and more reliable than pulse (decadic) dialing. If for some reason you
must use decadic dialing, your communications program must be set up to
record numbers using the following translation table as this modem does not
implement the New Zealand “Reverse Dialing” standard.
Number to be dialed: 0 1 2 3 4 5 6 7 8 9
Number to program into computer: 0 9 8 7 6 5 4 3 2 1
Note that where DTMF dialing is used, the numbers should be entered nor-
mally.
xiii
❑ The transmit level from this device is set at a fixed level and because of this
there may be circumstances where the performance is less than optimal.
Before reporting such occurrences as faults, please check the line with a
standard Telepermitted telephone, and only report a fault if the phone performance is impaired.
❑ It is recommended that this equipment be disconnected from the Telecom
line during electrical storms.
❑ When relocating the equipment, always disconnect the Telecom line connec-
tion before the power connection, and reconnect the power first.
❑ This equipment may not be compatible with Telecom Distinctive Alert
cadences and services such as FaxAbility.
NOTE THAT FAULT CALLOUTS CAUSED BY ANY OF THE
ABOVE CAUSES MAY INCUR A CHARGE FROM TELECOM
General conditions
As required by PTC 100, please ensure that this office is advised of any changes
to the specifications of these products which might affect compliance with the
relevant PTC Specifications.
The grant of this Telepermit is specific to the above products with the marketing
description as stated on the Telepermit label artwork. The Telepermit may not be
assigned to other parties or other products without Telecom approval.
A Telepermit artwork for each device is included from which you may prepare
any number of Telepermit labels subject to the general instructions on format,
size and colour on the attached sheet.
The Telepermit label must be displayed on the product at all times as proof to
purchasers and service personnel that the product is able to be legitimately connected to the Telecom network.
The Telepermit label may also be shown on the aging of the product and in the
sales literature, as required in PTC 100.
The charge for a Telepermit assessment is $337.50. An additional charge of
$337.50 is payable where an assessment is based on reports against non-Telecom
New Zealand Specifications. $112.50 is charged for each variation when submitted at the same time as the original.
An invoice for $NZ1237.50 will be sent under separate cover.
xiv
Following information is only for EU-member states:
The symbol indicates that this product may not be treated as
household waste. Please ensure this product is properly
disposed as inappropriate waste handling of this product may
cause potential hazards to the environment and human health.
For more detailed information about recycling of this product, please contact your local city office, your household
waste disposal service or the shop where you purchased the
product.
Optical disk drive standards
TOSHIBA Satellite M110/Satellite Pro M110 computer is shipped with one
of the following drives preinstalled: CD-RW/DVD-ROM, or DVD Super
Multi (+-R DL) drive.
The drive has one of the following labels:
CLASS 1 LASER PRODUCT
LASER KLASSE 1
LUOKAN 1 LASERLAITE
APPAREIL A LASER DE CLASSE1
KLASS 1 LASER APPARAT
Before it is shipped, the Class 1 Laser is certified to meet the United States
Chapter 21 Standards of the Department of Health and Human Services
(DHHS 21 CFR).
For any other country, the drive is certified to meet the Class 1 Laser standards of IEC825 and EN60825.
This symbol may not stick depending on the country and region where
you purchased.
xv
Important Notice
Copyrighted works including, but not limited to music, video, computer program, databases are protected by copyright laws. Unless specifically permitted
under applicable copyright laws, you cannot copy, modify, assign, transmit or
otherwise dispose of any copyrighted work with the consent of the owner of the
copyright. Please take notice that unauthorized copying, modification, assignment, transmission and disposition may be subject to claims for damages and
penalties.
❑ Avoid using a telephone (other than a cordless type) during an electrical
storm. There may be a remote risk of electric shock from lightning.
❑ Do not use the telephone to report a gas leak in the vicinity of the leak.
❑ Use only the power cord indicated in this manual.
❑ Replace only with the same or equivalent type battery recommended by the
manufacturer.
❑ Dispose of used batteries according to the manufacturer’s instructions.
CAUTION: Use only the battery pack that came with the computer or an
optional battery pack. Use of wrong battery could damage your computer.
TOSHIBA assumes no liability for any damage in such case.
xvi
CD-RW/DVD-ROM drive safety
instructions
CAUTIONS: 1. The drive employs a laser system. To ensure proper use
of this product, please read this instruction manual
carefully and retain for future reference.
Should the unit ever require maintenance, contact an
authorized service location.
2. Use of controls, adjustments or the performance of procedures other than those specified may result in hazardous radiation exposure.
3. To prevent direct exposure to the laser beam, do not try
to open the enclosure.
Matsushita UJDA770
Location of the required label
COMPLIES WITHFDA RADIATION
PERFORMANCE STANDARDS, 21
CFR SUBCHAPTER J.
MANUFACTURED:
Manufactured by
Panasonic Communications Co.,
LTD 1-62, 4-Chome, Minoshima,
Hakata-ku, Fukuoka, JAPAN
xvii
Toshiba Samsung TS-L462C
HLDS GCC-4244
Location of the required label
PRODUCT IS CERTIFIED BY THE
MANUFACTURER TO COMPLY WITH
DHHS RULES 21 CFR SUBCHAPTER
J APPLICABLE AT THE DATE OF
MANUFACTURE.
MANUFACTURED:
TOSHIBA SAMSUNG STORAGE
TECHNOLOGY CORPORATION 580,
HORIKAWA-CHO, SAIWAI-KU,
KAWASAKI-SHI, KANAGAWA, 2120013, JAPAN
Location of the required label
COMPLIES WITH FDA RADIATION
PERFORMACE STANDARS, 21C CFR
SUBCHAPTER J,
MANUFACTURED:
HITACHI-LG Data Storage
20, YOIDO-DONG, YOUNGDUNGPO-GU,
SEOUL, KOREA
xviii
TEAC DW-224E
DVD Super Multi (+-R DL) drive safety
instructions
CAUTIONS: 1. The drive employs a laser system. To ensure proper use
of this product, please read this instruction manual
carefully and retain for future reference.
Should the unit ever require maintenance, contact an
authorized service location.
2. Use of controls, adjustments or the performance of procedures other than those specified may result in hazardous radiation exposure.
3. To prevent direct exposure to the laser beam, do not try
to open the enclosure.
Location of the required label
CERTIFICATION TISH PRODUCT
COMPLIES WITH DHHS RULES21CFR
CHAPTER 1, SUBCHAPTER J APPLI-
CABLE DATE OF MANUFACTURE
MANUFACTURED:
TEAC CORPORATION
3-7-3 NAKA-CHO, MUSASHINO-SHI,
TOKYO, JAPAN
xix
Matsushita UJ-850U
HDLS GMA-4082N
COMPLIES WITH FDA RADIATION
PERFORMANCE STANDARDS 21 CFR
SUBCHAPTER J. 130KMT
MANUFACTURED:
Panasonic Communications Co. Ltd.
1-62 4-Chome Minoshima Hakata-Ku
Fukuoka, Japan
Location of the required label
Location of the required label
COMPLIES WITHFDA RADIATION
PERFORMANCE STANDARDS, 21
CFR SUBCHAPTER J.
MANUFACTURED:
Manufactured by
Panasonic Communications Co.,
LTD 1-62, 4-Chome, Minoshima,
Hakata-ku, Fukuoka, JAPAN
xx
NEC ND-7550A
Pioneer DVR-K16
Location of the required label
COMPLIES WITHFDA RADIATION
PERFORMANCE STANDARDS, 21
CFR SUBCHAPTER J.
MANUFACTURED:
Manufactured by
NEC SOLUTIONS
1-10, Nissnin-cho, Fuchu
TOKYO 183-8501, JAPAN
COMPLIES WITHFDA RADIATION
PERFORMANCE STANDARDS, 21
CFR SUBCHAPTER J.
MANUFACTURED:
Manufactured by
PIONEER CORPORATION 4-1.
Meguro 1-chome, Meguro-ku
TOKYO 153-8654, JAPAN
Location of the required label
xxi
CAUTION: This appliance contains a laser
system and is classified as a “CLASS 1 LASER
PRODUCT.” To use this model properly, read
the instruction manual carefully and keep this
manual for your future reference. In case of any
trouble with this model, please contact your
nearest “AUTHORIZED service station.” To
prevent direct exposure to the laser beam, do
not try to open the enclosure.
VORSICHT: Dieses Gerät enthält ein LaserSystem und ist als “LASERSCHUTZKLASSE 1
PRODUKT” klassifiziert. Für den richtigen
Gebrauch dieses Modells lesen Sie bitte die
Bedienungsanleitung sorgfältig durch und
bewahren diese bitte als Referenz auf. Falls
Probleme mit diesem Modell auftreten, benachrichtigen Sie bitte die nächste “autorisierte
Service-Vertretung”. Um einen direkten Kontakt mit dem Laserstrahl zu vermeiden darf das
Gerät nicht geöffnet werden.
ADVARSEL: Denne męrking er anbragt udv-
endigt på apparatet og indikerer, at apparatet
arbejder med laserstråler af klasse 1, hviket
betyder, at der anvendes laserstrlier afsvageste
klasse, og at man ikke på apparatets yderside
kan bilve udsat for utilladellg kraftig stråling.
APPARATET BOR KUN ÅBNES AF FAGFOLK
MED SĘRLIGT KENDSKAB TIL APPARATER
MED LASERSTRÅLER!
Indvendigt i apparatet er anbragt den her gengivne advarselsmękning, som advarer imod at
foretage sådanne indgreb i apparatet, at man
kan komme til at udsętte sig for laserstråling.
CLASS 1 LASTER PRODUCT
LASERSCHUTZKLASSE 1
PRODUKT
TO EN 60825
ADVERSEL: USYNLIG
LASERSTRÅLING VED ÅBNING,
NÅR SIKKERHEDSAF-BRYDER
ER UDE AF FUNKTION.
UNDGÅ UDSÆTTELSE FOR
STRÅLING
xxii
OBS! Apparaten innehåller laserkomponent som
avger laserstråining överstigande gränsen för
laserklass 1.
VAROITUS. Suojakoteloa si saa avata. Laite
sisältää laserdiodin, joka lähetää näkymätöntä
silmilie vaarallista lasersäteilyä.
CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED IN
THE OWNER’S MANUAL MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
VORSICHT: DIE VERWENDUNG VON
ANDEREN STEURUNGEN ODER EINSTELLUNGEN ODER DAS DURCHFÜHREN VON
ANDEREN VORGÄNGEN ALS IN DER BEDIENUNGSANLEITUNG BESCHRIEBEN KÖNNEN GEFÄHRLICHE
STRAHLENEXPOSITIONEN ZUR FOLGE
HABEN.
xxiii
Table of Contents
General Precautions
Stress injury ...................................................................xxxi
Heat injury ......................................................................xxxi
Pressure or impact damage..........................................xxxi
PC card overheating .....................................................xxxii
Mobile phone.................................................................xxxii
Preface
Manual contents...........................................................xxxiii
Conventions .................................................................xxxiv
Abbreviations..............................................................xxxiv
Icons ...........................................................................xxxiv
Keys............................................................................xxxiv
Key operation...............................................................xxxv
Display.........................................................................xxxv
Messages ....................................................................xxxv
Chapter 1 Introduction
Equipment checklist ........................................................1-1
Hardware .......................................................................1-1
Software.........................................................................1-2
Features ............................................................................1-3
Processor.......................................................................1-3
Memory..........................................................................1-3
Disks..............................................................................1-4
Special Features ............................................................1-10
Utilities ............................................................................1-12
Options ...........................................................................1-15
Chapter 2 The Grand Tour
Front with the display closed .........................................2-1
xxiv
Left side ............................................................................2-3
Right side..........................................................................2-5
Back side ..........................................................................2-6
Underside .........................................................................2-7
Front with the display open ............................................2-8
AV Buttons .....................................................................2-10
System indicators..........................................................2-11
USB diskette drive .........................................................2-13
Optical media drive........................................................2-14
Region codes for DVD drives and media.....................2-14
Writable discs ..............................................................2-14
CD-RW/DVD-ROM drive .............................................2-15
DVD Super Multi (+-R DL) drive ..................................2-15
Remote Controller........................................................2-16
AC adaptor......................................................................2-18
Chapter 3 Getting Started
Setting up your work space ............................................3-2
General conditions.........................................................3-2
Placement of computer..................................................3-3
Seating and posture.......................................................3-3
Lighting ..........................................................................3-4
Work habits....................................................................3-4
Connecting the AC adaptor ............................................3-5
Opening the display.........................................................3-6
Turning on the power ......................................................3-6
Starting up for the first time............................................3-7
Turning off the power ......................................................3-7
Shut Down mode (Boot mode) ......................................3-7
Hibernation mode ..........................................................3-7
Starting Hibernation.......................................................3-8
Automatic Hibernation ...................................................3-8
Standby mode................................................................3-9
Restarting the computer ...............................................3-10
Recovering Express Media Player Software ...............3-11
xxv
Using the Express Media Players Software BackUp CD
.........................................................................................3-12
Restoring the preinstalled software from the Product Re-
covery Media ..................................................................3-12
Chapter 4 Operating Basics
Using the Touch Pad .......................................................4-1
Using the Fingerprint Sensor(provided with some mod-
els).....................................................................................4-2
Points to note about the Fingerprint Sensor ..................4-2
Points to note about the Fingerprint Utility.....................4-5
Set Up Procedure ..........................................................4-5
Windows Logon via Fingerprint Authentication..............4-6
Fingerprint System Boot Authentication ........................4-7
Fingerprint Single Sign-On Feature...............................4-8
How to swipe the finger .................................................4-9
Using the USB diskette drive........................................4-11
Connecting the USB diskette drive..............................4-11
Disconnecting the USB diskette drive..........................4-12
Using optical media drive .............................................4-12
Loading a disc..............................................................4-13
Removing a disc ..........................................................4-15
AV Button functions .....................................................4-17
Remote Controller(provided with some models)........4-17
Using the remote controller..........................................4-17
Installing/Removing battery .........................................4-19
Installing/Removing remote controller .........................4-22
Express Media Player (provided with some models) 4-23
Notes for Express Media Player ..................................4-23
Express Media Player Settings....................................4-24
Writing CDs On CD-RW/DVD-ROM Drive.....................4-28
Important message (CD-RW/DVD-ROM drive) ...........4-28
Before writing or rewriting............................................4-28
When writing or rewriting .............................................4-29
Disclaimer (CD-RW/DVD-ROM drive) .........................4-30
Writing CD/DVDs On DVD Super Multi (+-R DL) Drive4-30
xxvi
Important message (DVD Super Multi (+-R DL) drive) 4-30
Before writing or rewriting............................................4-31
When writing or rewriting .............................................4-33
Disclaimer (DVD Super Multi (+-R DL) drive) ..............4-34
TOSHIBA Disc Creator................................................4-34
TOSHIBA Direct Disc Writer........................................4-35
Video............................................................................4-36
When using WinDVD Creator 2 Platinum: ...................4-36
Media Care......................................................................4-39
CD/DVDs .....................................................................4-39
Diskettes......................................................................4-40
Using The Microphone ..................................................4-40
Modem ............................................................................4-41
Region Selection..........................................................4-41
Properties menu ..........................................................4-42
Wireless Communications ............................................4-44
Wireless LAN...............................................................4-44
LAN(depending on the model you purchased) ...........4-46
Connecting LAN cable.................................................4-46
Disconnecting LAN cable.............................................4-47
Cleaning The Computer ................................................4-48
Moving The Computer ...................................................4-48
Heat Dispersal ................................................................4-49
Chapter 5 The Keyboard
Typewriter keys................................................................5-1
F1 ... F12 function keys ...................................................5-2
Soft keys: Fn key combinations .....................................5-2
Emulating keys on enhanced keyboard.........................5-2
Hot keys.........................................................................5-3
Fn Sticky key .................................................................5-7
Windows special keys .....................................................5-7
Keypad overlay ................................................................5-7
Turning on the overlays .................................................5-7
Arrow mode ...................................................................5-8
Numeric mode ...............................................................5-8
xxvii
Temporarily using normal keyboard (overlay on) ..........5-8
Temporarily using overlay (overlay off)..........................5-9
Temporarily changing modes ........................................5-9
Generating ASCII characters ..........................................5-9
Chapter 6 Power and Power-Up Modes
Power conditions .............................................................6-1
Power indicators ..............................................................6-3
Battery indicator.............................................................6-3
DC IN indicator ..............................................................6-3
Power indicator..............................................................6-4
Battery types ....................................................................6-4
Battery ...........................................................................6-4
Real time clock battery ..................................................6-5
Care and use of the battery pack ...................................6-5
Safety precautions.........................................................6-5
Charging the batteries ...................................................6-8
Monitoring battery capacity..........................................6-10
Maximizing battery operating time...............................6-11
Retaining data with power off ......................................6-12
Extending battery life ...................................................6-12
Replacing the battery pack ...........................................6-13
Removing the battery pack..........................................6-13
Installing the battery pack............................................6-16
Starting the computer by password.............................6-16
Power-up modes..........................................................6-17
Windows utilities ..........................................................6-17
Hot keys.......................................................................6-17
Panel power on/off.......................................................6-17
System Auto Off...........................................................6-17
Chapter 7 HW Setup and Passwords
HW Setup ..........................................................................7-1
Accessing HW Setup.....................................................7-1
HW Setup window .........................................................7-1
Chapter 8 Optional Devices
xxviii
Cards/memory ...............................................................8-1
Power devices ...............................................................8-1
Peripheral devices .........................................................8-1
Other..............................................................................8-1
PC card .............................................................................8-2
Installing the PC card.....................................................8-2
Removing the PC card...................................................8-3
Multiple Digital Media Card slot(Provided with some mod-
els).....................................................................................8-4
Installing the SD/SD-IO/MS/MS Pro/MMC/xD card .......8-4
Removing the SD/SD-IO/MS/MS Pro/MMC/xD card .....8-5
Memory expansion ..........................................................8-6
Installing memory module..............................................8-6
Removing memory module............................................8-7
Additional battery pack (6 Cell, 8 Cell, 9 Cell and 12 Cell)
...........................................................................................8-9
Additional AC adaptor .....................................................8-9
Battery charger ................................................................8-9
USB FDD Kit .....................................................................8-9
External monitor ............................................................8-10
Television .......................................................................8-11
i.LINK (IEEE1394) ...........................................................8-11
Precautions..................................................................8-11
Connecting...................................................................8-12
Disconnecting ..............................................................8-13
Security lock ................................................................8-13
Chapter 9 Troubleshooting
Problem solving process ................................................9-1
Preliminary checklist......................................................9-1
Analyzing the problem ...................................................9-2
Hardware and system checklist .....................................9-3
Hardware and system checklist(provided with some mod-
els).....................................................................................9-3
Self test..........................................................................9-4
Power.............................................................................9-4
xxix
Password.......................................................................9-7
Keyboard .......................................................................9-7
LCD panel......................................................................9-7
Hard disk drive...............................................................9-8
CD-RW/DVD-ROM drive ...............................................9-9
DVD Super Multi (+-R DL) drive ..................................9-10
Diskette drive...............................................................9-12
Infrared port .................................................................9-12
Pointing device ............................................................9-13
Touch Pad ...................................................................9-13
USB mouse..................................................................9-14
Fingerprint Sensor .......................................................9-16
PC card........................................................................9-17
SD/SD-IO/MS/MS Pro/MMC/xD card ..........................9-17
Monitor.........................................................................9-18
Sound system..............................................................9-19
TV output signal...........................................................9-19
USB .............................................................................9-20
Modem.........................................................................9-20
Standby/Hibernation ....................................................9-22
LAN..............................................................................9-22
Wireless LAN...............................................................9-22
Bluetooth......................................................................9-23
i.LINK (IEEE1394) .......................................................9-23
TOSHIBA support ..........................................................9-24
Before you call.............................................................9-24
Chapter 10 Disclaimers
CPU .................................................................................10-1
Main Memory disclaimer ...............................................10-2
Battery Life .....................................................................10-2
HDD drive capacity ........................................................10-2
LCD..................................................................................10-3
Graphics Processor Unit ("GPU") ................................10-3
Wireless LAN..................................................................10-3
Non-applicable icons.....................................................10-3
xxx
Copy protection .............................................................10-4
Images.............................................................................10-4
SRS..................................................................................10-4
Express Media Player(provided with some models) ..10-4
LCD brightness and eye strain .....................................10-4
Appendixes
Appendix A
Specifications.................................................................. A-1
Appendix B
Display Controller and Modes ....................................... B-1
Appendix C
AT Commands................................................................. C-1
Appendix D
S-registers ....................................................................... D-1
Appendix E
V.90/V.92 .......................................................................... E-1
Appendix F
Internal Modem Guide .................................................... F-1
Appendix G
Wireless LAN...................................................................G-1
Appendix H
AC Power Cord and Connectors ................................... H-1
Glossary
Abbreviations ..................................................... Glossary-1
Index
Loading...