Toshiba satellite 1900 Service Manual
FIELD REPLACEABLE UNIT DOCUMENTATION
1900 Series
1900 Series
1900 Series
GENERAL INFORMATION
1900 Series
1900 Series
1900 Series
GENERAL INFORMATION
1900 Series
1900 Series
1900 Series
1900 Series
1900 Series
1900 Series
GENERAL INFORMATION
1900 Series
1900 Series
1900 Series
GENERAL INFORMATION
1900 Series
GENERAL INFORMATION
1900 Series
1900 Series
1900 Series
1900 Series
1900 Series
1900 Series
1900 Series
1900 Series
1900 Series
1900 Series
TM
Satellite
1900 Series
GENERAL INFORMATION
Tools Required for Proper
Disassembly and Reassembly:
Before attempting any of the following procedures,
make sure that the main battery and AC adaptor is
not connected to the unit and the environment in
which you are working on is protected from
Electro-Static Discharge(ESD).
1. Phillips Screwdrivers (Size 1&0)
2. 3mm Flat head Screwdriver
3. Security Torx (Size 6)
4. Case Separator
5. ESD Wrist Strap
6. ESD mat
7. Tweezers
TOSHIBA
Tough Enough for Today’s World
FIELD REPLACEABLE UNIT DOCUMENTATION
TM
Satellite
1900 Series
TABLE OF CONTENTS:
1. BATTERY PACK REMOVAL
2. OPTIONAL PC CARD REMOVAL
3. HDD REMOVAL
4. FDD REMOVAL
5. MEMORY MODULE REMOVAL
6. MINI PCI CARD REMOVAL
7. CD-R/W/DVD-ROM REMOVAL
8. CPU REMOVAL
9. KEYBOARD REMOVAL
10. TOP COVER REMOVAL
11. SYSTEM BOARD REMOVAL
12. MODEM BOARD REMOVAL
13. COOLING MODULE REMOVAL
14. LED BOARD REMOVAL
15. TOUCHPAD BOARD REMOVAL
16. SPEAKERS REMOVAL
17. 15’’ DISPLAY MASK REMOVAL
18. FL INVERTER AND 15’’ LCD REMOVAL
TOSHIBA
Tough Enough for Today’s World
FIELD REPLACEABLE UNIT DOCUMENTATION
TM
Satellite
1900 Series
BATTERY PACK REMOVAL OPTIONAL PC CARD REMOVAL
Battery
release lever
Battery pack
Eject button
PC Card
1. Turn the computer upside down as shown.
2. Slide the battery release lever in the direction of the
arrow.
3. Lift out the battery pack.
4. Separate the battery pack from the battery cover.
HDD REMOVAL
HDD cover
1. Turn the computer upside down.
2. Remove two M2.5x4 black screw securing
HDD assembly and lift it out.
.
M2.5x4 black screw
1. Press the eject button of the PC Card you want to
remove.
2. Press the extended eject button to pop the PC card
out slightly.
3. Grasp the PC Card and pull it out
NOTE: Before removing any PCMCIA device, make
make it is “STOPPED” in the PC Card Manager.
M3x3 silver screws
HDD plate
HDD interface
connector
M3x3 silver screws
HDD bracket
3. Remove the HDD interface connector.
4. Remove two M3x3 silver screws securing the HDD
plate and lift out the plate.
5. Remove four M3x3 silver screws securing the HDD
bracket and separate the HDD from the bracket..
TOSHIBA
Tough Enough for Today’s World
FIELD REPLACEABLE UNIT DOCUMENTATION
TM
Satellite
1900 Series
FDD REMOVAL
M2x3 black screws
Bezel
FDD cable
FDD assy
1. Remove one M2.5x4 black screw securing the FDD
assembly.
2. Disconnect the FDD cable from the system board.
3. Slide the FDD assembly to the right and lift it out.
M2.5x4 black screw
4. Remove two M2x3 black screws securing the
FDD bezel from the FDD and lift out the bezel.
5. Disconnect the FDD cable from the FDD.
FDD cable
MEMORY MODULE REMOVAL
M2.5x4 black screws
1. Turn the computer upside down.
2. Remove four M2.5x4 black screws securing the
memory cover.
3. Lift out the cover.
Memory module
Memory clips
4. Gently press out on the memory clips and pull the
memory module out of the connector on a 45 degree
angle.
TOSHIBA
Tough Enough for Today’s World
Loading...