Toshiba S2 User Manual

User’s Manual

Tecra A3/S2

Choose freedom.Choose freedom.

computers.toshiba-europe.com

© 2005 by TOSHIBA Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of TOSHIBA. No patent liability is assumed, with respect to the use of the information contained herein.

TOSHIBA TECRA A3/S2 Series Portable Personal Computer User's Manual

First edition Jan. 2005 Ownership and copyright of music, video computer programs, databases,

etc. are protected by the copyright laws. These copyrighted materials may be copied for private use at home only. If, beyond the limitation above, you copy (including to transform data formats) or modify these materials, transfer them or distribute them via the Internet without approval of copyright owners, you may be subject to claims for compensation for damage and/or criminal penalities due to infringements of copyrights or personal rights. Please remember to observe the copyright laws when you use this product to copy the copyrighted works or perform other actions. Please note that you may infringe the owner's rights protected by the copyright laws if you use the screen mode switching functions (e.g.Wide mode, Wide Zoom mode, etc.) of this product to display enlarged images/video at coffee shops or hotels for the purposes of profits or providing these to the public.

Disclaimer

This manual has been validated and reviewed for accuracy. The instructions and descriptions it contains are accurate for the TECRA A3/S2 series Portable Personal Computers at the time of this manual’s production. However, succeeding computers and manuals are subject to change without notice. TOSHIBA assumes no liability for damages incurred directly or indirectly from errors, omissions or discrepancies between the computer and the manual.

Trademarks

IBM is a registered trademark and IBM PC, OS/2, and PS/2 are trademarks of International Business Machines Corporation. Celeron, Intel, Intel SpeedStep, and Pentium are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries.

MS-DOS, Microsoft, Windows and DirectX are registered trademarks of Microsoft Corporation.

Centronics is a registered trademark of Centronics Data Computer Corporation. Photo CD is a trademark of Eastman Kodak.

Bluetooth is a trademark owned by its proprietor and used by TOSHIBA under license.

iLINK is a trademark of Sony Corporation. Other trademarks and registered trademarks not listed above may be used

in this manual.

TECRA A3/S2 ii

Macrovision License of Notice

This product incorporates copyright protection technology that is protected by methods and claims of certain U.S. patents and other intellectual rights owned by Macrovision Corporation, and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended for home and other limited viewing uses only unless authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

Safety Instructions

Use the following safety guidelines to help protect yourself and your computer.

When Using Your Computer

Do not operate your portable computer for an extended period of time with the base resting directly on your body. With extended operation, heat can potentially build up in the base. Allowing sustained contact with the skin could cause discomfort or, eventually, a burn.

■ Do not attempt to service the computer yourself. Always flow installation

instructions closely.

■ Do not carry a battery in your pocket, purse, or other container where

metal objects (such as car keys) could short-circuit the battery terminals. The resulting excessive current follow can cause extremely high temperatures and may result in damage from burns.

■ Be sure that noting rests on your AC adapter's power cable and that the

cable is not located where it can be tripped over or stepped on.

■ Place the AC adapter in a ventilated area, such as a desk top or on the

floor, when you use it to run the computer or to charge the battery. Do not cover the AC adapter with papers or other items that will reduce cooling; also, do not use the AC adapter while it is inside a carrying case.

■ Use only the AC adapter and batteries that are approved for use with this

computer. Use of another type of battery or AC adapter may risk fire or explosion.

■ Before you connect the computer to a power source, ensure that the

voltage rating of the AC adapter matches that of the available power source.

115 V/60Hz in most of North and south America and some Far Eastern countries such as Taiwan.

100 V/50Hz in eastern Japan and 100 V/60Hz in western Japan. 230 V/50 Hz in most of Europe, the Middle East, and the Far East.

■ If you use an extension cable with your AC adapter, ensure that the total

ampere rating of the products plugged in to the extension cable does not exceed the ampere rating of the extension cable.

TECRA A3/S2 iii

■ To remove power from the computer, turn it off, remove the battery, and

disconnect the AC adapter from the electrical outlet.

■ To help avoid the potential hazard of electric shock, do not connect or

disconnect any cables or perform maintenance or reconfiguration of this product during an electrical storm.

■ When setting up the computer for work, place it on a level surface.

■ Do not dispose of batteries in a fire. They may explode. Check with local

authorities for disposal instructions.

■ When traveling, do not check the computer as baggage. You can put your

computer through an X-ray security machine, but never put your computer through a metal detector. If you have the computer checked by hand, be sure to have a charged battery available in case you are asked to turn on the computer.

■ When traveling with the hard drive removed from the computer, wrap the

drive in a non-conducting material, such as cloth or paper. If you have the drive checked by hand, be ready to install the drive in the computer. Your can put the hard drive through an X-ray security machine, but never, but the drive through a metal detector.

■ When traveling, do not place the computer in overhead storage

compartments where it could slide around. Do not drop your computer or subject it to other mechanical shocks.

■ Protect your computer, battery, and hard drive from environmental

hazards such as dirt, dust, food, liquids, temperature extremes, and overexposure to sunlight.

■ When you move your computer between environments with very different

temperature and/or humidity ranges, condensation may form on or within the computer. To avoid damaging the computer, allow sufficient time for the moisture to evaporate before using the computer.

When taking the computer from low-temperature conditions into a warmer environment or from high-temperature conditions into a cooler environments, allow the computer to acclimate to room temperature before turning or power.

■ When you disconnect a cable, pull on its connector or on its strain relief

loop, not on the cable itself. As you pull out the connector, keep it evenly aligned to avoid bending any connector pins. Also, before you connect a cable make sure both connectors are correctly oriented and aligned.

■ Before you clean your computer, turn if off, unplug it from its power source,

and remove the battery.

■ Handle components with care. Hold a component such as a memory

module by its edges, not its pins.

When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following:

TECRA A3/S2 iv

■ Do not use this product near water, for example, near a bathtub, washing

bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool.

■ Avoid using a telephone (other than a cordless type) during an electrical

storm. There may be a remote risk of electric shock from lightning.

■ Do not use the telephone to report a gas leak in the vicinity of the leak.

■ Use only the power cord indicated in this manual.

■ Replace only with the same or equivalent type battery recommended by

the manufacturer.

■ Dispose of used batteries according to the manufacturer's instructions.

Use only the battery pack that came with the computer or an optional battery pack. Use of wrong battery could damage your computer.

TOSHIBA assumes no liability for any damage in such case.

FCC information

Model Name: TECRA A3/S2

FCC notice "Declaration of Conformity Information"

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

■ Reorient or relocate the receiving antenna.

■ Increase the separation between the equipment and receiver.

■ Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

■ Consult the dealer or an experienced radio/TV technician for help.

Only peripherals complying with the FCC class B limits may be attached to this equipment. Operation with non-compliant peripherals or peripherals not recommended by TOSHIBA is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and the computer's or expansion unit's external monitor port, USB port and microphone jack. Changes or modifications made to this equipment, not expressly approved by TOSHIBA or parties authorized by TOSHIBA could void the user's authority to operate the equipment.

TECRA A3/S2 v

EMC Regulatory Information

Contact

Address: TOSHIBA America Information Systems, Inc.

9740 Irvine Boulevard Irvine, California 92618-1697

Telephone: (949)583-3000

EU Declaration of Conformity

This product is labelled with the CE Mark in accordance with the related European Directives, notably Electromagnetic Compatibility Directive 89/ 336/EEC for the notebook and the electronic accessories including the supplied power adapter, the Radio Equipment and Telecommunications Terminal Equipment Directive 99/5/EEC in case of implemented telecommunication accessories and the Low Voltage Directive 73/23/EEC for the supplied power adapter.

CE Marking is the responsibility of TOSHIBA EUROPE GmbH, Hammfelddamm 8, 41460 Neuss, Germany, phone +49-(0)-2131-158-01. For a copy of the related CE Declaration of Conformity please refer to the following website: http://epps.toshiba-teg.com

Canadian Regulatory Information (Canada Only)

This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the Radio Interference Regulation of the Canadian Department of Communications.

Note that Canadian Department of Communications (DOC) regulations provide, that changes or modifications not expressly approved by TOSHIBA Corporation could void your authority to operate this equipment.

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

Cet appareil numérique de la class B respecte toutes les exgences du Règlement sur le matériel brouilleur du Canada.

BSMI Notice (Taiwan Only)

ᤞܫࠌش ; ຍԬᣊᇷಛข঴Δڇၲ࣋ᛩቼխࠌشழΔױ౨ᄎທګྤᒵሽեឫΔ

ຍጟൣݮՀΔࠌشᄎ๯૞ޣආ࠷ࠄᔞᅝኙ࿜Θ

TECRA A3/S2 vi

Optical Disc Drive Safety Instruction

■ Be sure to check the international precautions at the end of this section.

The optical drive that is used in this computer is equipped with laser. The classification label with the following sentence is affixed to the surface of the drive.

CLASS 1 LASER PRODUCT LASER KLASSE 1 LUOKAN 1 LASERLAITE APPAREIL A LASER DE CLASSE 1 KLASS 1 LASER APPARAT

The drive with the above label is certified by the manufacturer that the drive complies with the requirement for laser product on the date of manufacturing pursuant to article 21 of Code of Federal Regulations by the United States of America, Department of Health & Human Services, Food and Drug Administration.

In other countries, the drive is certified to comply with the requirement pursant to IEC 825 and EN60825 on class 1 laser product.

This computer is equipped with one of the optical drive in the following list according to the model.

Manufacturer Type

TOSHIBA Samsung DVD-ROM SD-C2712

TOSHIBA Samsung CD-RW/DVD-ROM TS-L462A

TOSHIBA Samsung DVD Super Multi TS-L632A

Matsushita CD-RW/DVD-ROM UJDA760

Matsushita DVD Super Multi UJ-830B

Matsushita DVD Super Multi UJ-831B

TEAC CD-ROM CD-224E

TEAC CD-RW/DVD-ROM DW-224E

TEAC DVD Super Multi DV-W28E

Pioneer DVD Dual DVR-K15TBT

TECRA A3/S2 vii

International precautions

■ This drive employs a laser system. To ensure proper use of this product,

please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location.

■ Use of controls, adjustments or the performance of procedures other

than those specified may result in hazardous radiation exposure.

■ To prevent direct exposure to the laser beam, do not try to open the

enclosure.

Location of the required label

Sample shown below. Location of the label on the drive and manufacturing information may vary.

CAUTION: This appliance contains a laser system and is classified as a "CLASS 1 LASER PRODUCT." To use this model properly, read the instruction manual carefully and keep this manual for your future reference. In case of any trouble with this model, please contact your nearest "AUTHORIZED service station." To prevent direct exposure to the laser beam, do not try to open the enclosure.

TECRA A3/S2 viii

VORSICHT: Dieses Gerät enthält ein Laser-

System und ist als "LASERSCHUTZKLASSE 1 PRODUKT" klassifiziert. Für den richtigen Gebrauch dieses Modells lesen Sie bitte die Bedienungsanleitung sorgfältig durch und bewahren diese bitte als Referenz auf. Falls Probleme mit diesem Modell auftreten, benachrichtigen Sie bitte die nächste "autorisierte Service-Vertretung". Um einen direkten Kontakt mit dem Laserstrahl zu vermeiden darf das Gerät nicht geöffnet werden.

ADVARSEL: Denne mærking er anbragt udvendigt på apparatet og indikerer, at apparatet arbejder med laserstråler af klasse 1, hviket betyder, at der anvendes laserstrlier af svageste klasse, og at man ikke på apparatets yderside kan bilve udsat for utilladellg kraftig stråling.

APPARATET BOR KUN ÅBNES AF FAGFOLK MED SÆRLIGT KENDSKAB TIL APPARATER MED LASERSTRÅLER!

Indvendigt i apparatet er anbragt den her gengivne advarselsmækning, som advarer imod at foretage sådanne indgreb i apparatet, at man kan komme til at udsætte sig for laserstråling.

OBS! Apparaten innehåller laserkomponent som avger laserstråining överstigande gränsen för laserklass 1.

VAROITUS. Suojakoteloa si saa avata. Laite sisältää laserdiodin, joka lähetää näkymätöntä silmilie vaarallista lasersäteilyä.

CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED IN THE OWNER'S MANUAL MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

VORSICHT: DIE VERWENDUNG VON ANDEREN STEURUNGEN ODER EINSTELLUNGEN ODER DAS DURCHFÜHREN VON ANDEREN VORGÄNGEN ALS IN DER BEDIENUNGSANLEITUNG BESCHRIEBEN KÖNNEN GEFÄHRLICHE STRAHLENEXPOSITIONEN ZUR FOLGE HABEN.

TECRA A3/S2 ix

Modem warning notice

Conformity Statement

The equipment has been approved to [Commission Decision "CTR21"] for pan- European single terminal connection to the Public Switched Telephone Network (PSTN).

However, due to differences between the individual PSTNs provided in different countries/regions the approval does not, of itself, give an unconditional assurance of successful operation on every PSTN network termination point.

In the event of problems, you should contact your equipment supplier in the first instance.

Network Compatibility Statement

This product is designed to work with, and is compatible with the following networks. It has been tested to and found to confirm with the additional requirements conditional in EG 201 121.

Germany ATAAB AN005,AN006,AN007,AN009,AN010

Greece ATAAB AN005,AN006 and GR01,02,03,04

Portugal ATAAB AN001,005,006,007,011 and

Spain ATAAB AN005,007,012, and ES01

Switzerland ATAAB AN002

All other countries/regions ATAAB AN003,004

Specific switch settings or software setup are required for each network, please refer to the relevant sections of the user guide for more details.

The hookflash (timed break register recall) function is subject to separate national type approvals. It has not been tested for conformity to national type regulations, and no guarantee of successful operation of that specific function on specific national networks can be given.

and DE03,04,05,08,09,12,14,17

P03,04,08,10

Japan regulations

Region selection

If you are using the computer in Japan, technical regulations described in the Telecommunications Business Law require that you select the Japan country mode.

It is illegal to use the modem in Japan with any other selection.

TECRA A3/S2 x

Redial

Up to two redial attempts can be made. If more than two redial attempts are made, the modem will return Black Listed. If you are experiencing problems with the Black Listed code, set the interval between redials at one minute or longer.

Japan's Telecommunications Business Law permits up to two redials on analogue telephones, but the redials must be made within a total of three minutes.

The internal modem is approved by Japan Approvals Institute for Telecommunications Equipment.

Pursuant to FCC CFR 47, Part 68:

When you are ready to install or use the modem, call your local telephone company and give them the following information:

■ The telephone number of the line to which you will connect the modem

■ The registration number that is located on the device

The FCC registration number of the modem will be found on either the device which is to be installed, or, if already installed, on the bottom of the computer outside of the main system label.

■ The Ringer Equivalence Number (REN) of the modem, which can vary.

For the REN of your modem, refer to your computer's user's guide.

The modem connects to the telephone line by means of a standard jack called the USOCRJ11C.

Type of service

Your modem is designed to be used on standard-device telephone lines. Connection to telephone company-provided coin service (central office implemented systems) is prohibited. Connection to party lines service is subject to state tariffs. If you have any questions about your telephone line, such as how many pieces of equipment you can connect to it, the telephone company will provide this information upon request.

Telephone company procedures

The goal of the telephone company is to provide you with the best service it can. In order to do this, it may occasionally be necessary for them to make changes in their equipment, operations, or procedures. If these changes might affect your service or the operation of your equipment, the telephone company will give you notice in writing to allow you to make any changes necessary to maintain uninterrupted service.

TECRA A3/S2 xi

If problems arise

If any of your telephone equipment is not operating properly, you should immediately remove it from your telephone line, as it may cause harm to the telephone network. If the telephone company notes a problem, they may temporarily discontinue service. When practical, they will notify you in advance of this disconnection.

If advance notice is not feasible, you will be notified as soon as possible. When you are notified, you will be given the opportunity to correct the problem and informed of your right to file a complaint with the FCC. In the event repairs are ever needed on your modem, they should be performed by TOSHIBA Corporation or an authorized representative of TOSHIBA Corporation.

Disconnection

If you should ever decide to permanently disconnect your modem from its present line, please call the telephone company and let them know of this change.

Fax branding

The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device to send any message via a telephone fax machine unless such message clearly contains in a margin at the top or bottom of each transmitted page or on the first page of the transmission, the date and time it is sent and an identification of the business, other entity or individual sending the message and the telephone number of the sending machine or such business, other entity or individual. In order to program this information into your fax modem, you should complete the setup of your fax software before sending messages.

TECRA A3/S2 xii

Instructions for IC CS-03 certified equipment

1. NOTICE: The Industry Canada label identifies certified equipment. This certification means that the equipment meets certain telecommunications network protective, operational and safety requirements as prescribed in the appropriate Terminal Equipment Technical Requirements document(s). The Department does not guarantee the equipment will operate to the user's satisfaction.

Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment must also be installed using an acceptable method of connection.

The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations. Repairs to certified equipment should be coordinated by a representative designated by the supplier. Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the telecommunications company cause to request the user to disconnect the equipment.

Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas.

Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection authority, or electrician, as appropriate.

2. The user manual of analog equipment must contain the equipment's Ringer Equivalence Number (REN) and an explanation notice similar to the following: The Ringer Equivalence Number (REN) of the modem, which can vary. For the REN of your modem, refer to your computer's user's guide.

The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed 5.

3. The standard connecting arrangement (telephone jack type) for this equipment is jack type(s): USOC RJ11C.

The IC registration number of the modem is shown below. Canada: 1353-11026A

TECRA A3/S2 xiii

Notes for Users in Australia and New Zealand

Modem warning notice for Australia

Modems connected to the Australian telecoms network must have a valid Austel permit. This modem has been designed to specifically configure to ensure compliance with Austel standards when the country/region selection is set to Australia.

The use of other country/region setting while the modem is attached to the Australian PSTN would result in your modem being operated in a noncompliant manner. To verify that the country/region is correctly set, enter the command ATI which displays the currently active setting.

To set the country/region permanently to Australia, enter the following command sequence:

■ AT% TE=1

■ ATS133=1

■ AT& F

■ AT& W

■ AT% TE=0

■ ATZ

Failure to set the modem to the Australia country/region setting as shown above will result in the modem being operated in a non-compliant manner. Consequently, there would be no permit in force for this equipment and the Telecoms Act 1991 prescribes a penalty of $12,000 for the connection of non-permitted equipment.

TECRA A3/S2 xiv

Notes for use of this device in New Zealand

■ The grant of a Telepermit for a device in no way indicates Telecom

acceptance of responsibility for the correct operation of that device under all operating conditions. In particular the higher speeds at which this modem is capable of operating depend on a specific network implementation which is only one of many ways of delivering high quality voice telephony to customers. Failure to operate should not be reported as a fault to Telecom.

■ In addition to satisfactory line conditions a modem can only work properly

if: a/ it is compatible with the modem at the other end of the call and b/ the application using the modem is compatible with the application at

the other end of the call - e.g., accessing the Internet requires suitable software in addition to a modem.

■ This equipment shall not be used in any manner which could constitute

a nuisance to other Telecom customers.

■ Some parameters required for compliance with Telecom's PTC

Specifications are dependent on the equipment (PC) associated with this modem. The associated equipment shall be set to operate within the following limits for compliance with Telecom Specifications:

a/ There shall be no more than 10 call attempts to the same number within any 30 minute period for any single manual call initiation, and

b/ The equipment shall go on-hook for a period of not less than 30 seconds between the end of one attempt and the beginning of the next.

c/ Automatic calls to different numbers shall be not less than 5 seconds apart.

■ Immediately disconnect this equipment should it become physically

damaged, and arrange for its disposal or repair.

■ The correct settings for use with this modem in New Zealand are as

follows: ATB0 (CCITT operation) AT&G2 (1800 Hz guard tone) AT&P1 (Decadic dialing make-break ratio =33%/67% ATS0=0 (not auto answer) ATS10=less than 150 (loss of carrier to hangup delay, factory default of

15 recommended) ATS11=90 (DTMF dialing on/off duration=90 ms) ATX2 (Dial tone detect, but not (U.S.A.) call progress detect)

■ When used in the Auto Answer mode, the S0 register must be set with a

value of 3 or 4. This ensures: (a) a person calling your modem will hear a short burst of ringing before

the modem answers. This confirms that the call has been successfully switched through the network.

(b) caller identification information (which occurs between the first and second ring cadences) is not destroyed.

TECRA A3/S2 xv

■ The preferred method of dialing is to use DTMF tones (ATDT...) as this

is faster and more reliable than pulse (decadic) dialing. If for some reason you must use decadic dialing, your communications program must be set up to record numbers using the following translation table as this modem does not implement the New Zealand "Reverse Dialing" standard.

Number to be dialed: 0 1 2 3 4 5 6 7 8 9 Number to program into computer: 0 9 8 7 6 5 4 3 2 1 Note that where DTMF dialing is used, the numbers should be entered

normally.

■ The transmit level from this device is set at a fixed level and because of

this there may be circumstances where the performance is less than optimal. Before reporting such occurrences as faults, please check the line with a standard Telepermitted telephone, and only report a fault if the phone performance is impaired.

■ It is recommended that this equipment be disconnected from the Telecom

line during electrical storms.

■ When relocating the equipment, always disconnect the Telecom line

connection before the power connection, and reconnect the power first.

■ This equipment may not be compatible with Telecom Distinctive Alert

cadences and services such as FaxAbility. ( NOTE THAT FAULT CALL OUT CAUSED BY ANY OF THE ABOVE

CAUSES MAY INCUR A CHARGE FROM TELECOM )

General conditions

As required by PTC 100, please ensure that this office is advised of any changes to the specifications of these products which might affect compliance with the relevant PTC Specifications.

The grant of this Telepermit is specific to the above products with the marketing description as stated on the Telepermit label artwork. The Telepermit may not be assigned to other parties or other products without Telecom approval.

A Telepermit artwork for each device is included from which you may prepare any number of Telepermit labels subject to the general instructions on format, size and colour on the attached sheet.

The Telepermit label must be displayed on the product at all times as proof to purchasers and service personnel that the product is able to be legitimately connected to the Telecom network.

The Telepermit label may also be shown on the packaging of the product and in the sales literature, as required in PTC 100.

The charge for a Telepermit assessment is $337.50. An additional charge of $337.50 is payable where an assessment is based on reports against nonTelecom New Zealand Specifications. $112.50 is charged for each variation when submitted at the same time as the original.

An invoice for $NZ1237.50 will be sent under separate cover.

TECRA A3/S2 xvi

Important Notice

Copyrighted works including, but not limited to music, video, computer program, databases are protected by copyright laws. Unless specifically permitted under applicable copyright laws, you cannot copy, modify, assign, transmit or otherwise dispose of any copyrighted work with the consent of the owner of the copyright.

Please take notice that unauthorized copying, modification, assignment, transmission and disposition may be subject to claims for damages and penalties.

General Precautions

TOSHIBA computers are designed to optimize safety, minimize strain and withstand the rigors of portability. However, certain precautions should be observed to further reduce the risk of personal injury or damage to the computer.

Be certain to read the general precautions below and to note the cautions included in the text of the manual.

Stress injury

Carefully read the Safety Instruction Manual. It contains information on prevention of stress injuries to your hands and wrists that can be caused by extensive keyboard use. Chapter 3, Getting Started, also includes information on work space design, posture and lighting that can help reduce physical stress.

Heat injury

■ Avoid prolonged physical contact with the bottom of the computer. If the

computer is used for long periods, its surface can become very warm. While the temperature will not feel hot to the touch, if you maintain physical contact with the computer for a long time (if you rest the computer on your lap, for example) your skin might suffer low-heat injury.

■ If the computer has been used for a long time, avoid direct contact with

the metal plate supporting the I/O ports. It can become hot.

■ The surface of the AC adaptor can become hot when in use. This

condition does not indicate a malfunction. If you need to transport the AC adaptor, disconnect it and let it cool before moving it.

■ Do not lay the AC adaptor on a material that is sensitive to heat. The

material could be damaged.

Pressure or impact damage

Do not apply heavy pressure to the computer or subject it to strong impact. Excessive pressure or impact can damage computer components or

otherwise cause malfunctions.

TECRA A3/S2 xvii

PC Card overheating

Some PC cards can become hot with prolonged use. Overheating of a PC Card can result in errors or instability in the PC Card operation. Also be careful when you remove a PC Card that has been used for a long time.

Mobile phone

Use of mobile phones can interfere with the audio system. Computer operation is not impaired but it is recommended that a distance of 30cm be maintained between the computer and a mobile phone in use.

LCD

Over a period of time, and depending on the usage of the computer, the brightness of the LCD screen will deteriorate. This is an intrinsic characteristic of LCD technology.

Maximum brightness is only available when operating in AC power mode. Screen will dim when the computer is operated on battery power and you may not be able to increase the brightness of the screen.

Central Processing Unit (“CPU”) Performance Disclaimer:

CPU performance in your computer product may vary from specifications under the following conditions:

■ use of certain external peripheral products

■ use of battery power instead of AC power

■ use of certain multimedia, computer generated graphics or video

applications

■ use of standard telephone lines or low speed network connections

■ use of complex modeling software, such as high end computer aided

design applications

■ use of several applications or functionalities simultaneously

■ use of computer in areas with low air pressure (high altitude > 1,000

meters or > 3,280 feet above sea level)

■ use of computer at temperatures outside the range of 5 ºC to 30 ºC (41ºF

to 86 ºF) or > 25 ºC (77 ºF) at high altitude (all temperature references are approximate and may vary depending on the specific computer model-please refer to your PC documentation or visit the Toshiba website for detail at www.pcsupport.toshiba.com).

CPU performance may also vary from specifications due to design configuration.

Under some conditions, your computer product may automatically shutdown.

This is a normal protective feature designed to reduce the risk of lost data or damage to the product when used outside recommended conditions.

TECRA A3/S2 xviii

To avoid risk of lost data, always make back-up copies of data by periodically storing it on an external storage medium. For optimum performance, use your computer product only under recommended conditions. Read additional restrictions under “Environmental Conditions” in your PC documentation. Contact Toshiba Technical Service and Support for more information.

Copy Protection

Copy protection technology included in certain media may prevent or limit recording or viewing of the media.

Hard Disk Drive Capacity

1 Gigabyte (GB) means 1000 x 1000 x 1000 = 1,000,000,000 bytes using powers of 10. The computer operating system, however, reports storage capacity using powers of 2 for the definition of 1 GB = 1024 x 1024 x 1024 = 1,073,741,824 bytes, and therefore may show less storage capacity. Available storage capacity will also be less if the product includes one or more pre-installed operating systems, such as Microsoft Operating System and/or pre-installed software applications, or media content. Actual formatted capacity may vary.

Non-applicable Icons

Certain notebook chassis are designed to accommodate all possible configurations for an entire product series. Your selected model may not have all the features and specifications corresponding to all of the icons or switches shown on the notebook chassis, unless you have selected all those features.

Wireless LAN/Atheros

The transmission speed over the wireless LAN and the distance over which wireless LAN can reach may vary depending on surrounding electromagnetic environment, obstacles, access point design and configuration, and client design and software/hardware configurations. The actural transmission speed will be lower than the theoretical maximum speed.

To use the Atheros SuperAG point must support the corresponding feature. Performance of these functions may vary depending on the format of data transmitted.

or SuperGTM function, your client and access

Images

All images are simulated for purposes of illustration.

Express Media Player

The Express Media Player is not a Windows based application. Battery life will be less than when using similar applications in the Windows Operating System.

TECRA A3/S2 xix

LCD Brightness and Eye Strain

Your LCD display has a brightness approaching that of a TV device. We recommend that you adjust the brightness of your LCD to a comfortable level to prevent possible strain on your eyes.

CE compliance

This product and the original options are designed to observe the related EMC (Electromagnetic Compatibility) and safety standards. However, TOSHIBA cannot guarantee that this product still observes these EMC standards if options or cables not produced by TOSHIBA are connected or implemented. In this case the persons who have connected / implemented those options / cables have to provide assurance that the system (PC plus options / cables) still fulfils the required standards. To avoid general EMC problems, the following guidance should be noted:

■ Only CE marked options should be connected / implemented

■ Only best shielded cables should be connected

Working environment

This product was designed to fulfill the EMC (Electromagnetic Compatibility) requirements to be observed for so-called "Residential, commercial and light industry environments".

TOSHIBA do not approve the use of this product in working environments other than the above mentioned "Residential, commercial and light industry environments".

For example, the following environments are not approved:

■ Industrial Environments (environments with a mains voltage >230V~)

■ Medical Environments

■ Automotive Environments

■ Aircraft Environments

If this product is supplied with a network port, please refer to the paragraph "Network connection".

Any consequences resulting from the use of this product in working environments that are not approved are not the responsibility of TOSHIBA Europe GmbH.

The consequences of the use of this product in non-approved working environments may be:

■ Interference with other devices or machines in the near surrounding area

■ Malfunction of, or data loss from, this product caused by disturbances

generated by other devices or machines in the near surrounding area

Therefore TOSHIBA strongly recommend that the electromagnetic compatibility of this product should be suitably tested in all non-approved working environments before use. In the case of automobiles or aircraft, the manufacturer or airline respectively should be asked for permission before use of this product.

TECRA A3/S2 xx

Furthermore, for general safety reasons, the use of this product in environments with explosive atmospheres is not permitted.

Network connection (Class A warning)

If this product has networking capabilities and will be connected to a network, Class A radiation limits will be observed (in accordance with technical conventions). This means that if the product will be used in a domestic environment, other devices in the near surrounding area may suffer interference. Consequently, please do not use this product in such environments (for example a living room), otherwise you could be held responsible for any ensuing interference.

Information on the secure writing of optical media

Even if your software gives no indication that any problems have occurred, you should always check to ensure that information has been successfully stored on recordable optical media (CD-R, CD-RW and so forth).

Wireless LAN and your Health

Wireless LAN products, like other radio devices, emit radio frequency electromagnetic energy. The level of energy emitted by Wireless LAN devices however is far less than the electromagnetic energy emitted by other wireless devices such as mobile phones.

Because Wireless LAN products operate within the guidelines found in radio frequency safety standards and recommendations, TOSHIBA believes Wireless LAN is safe for use by consumers. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature.

In some situations or environments, the use of Wireless LAN may be restricted by the proprietor of the building or responsible representatives of the organisation. These situations may for example include:

■ Using the Wireless LAN equipment on board of aeroplanes

■ In any other environment where the risk of interference to other devices

or services is perceived or identified as harmful.

If you are uncertain of the policy that applies on the use of wireless devices in a specific organisation or environment (e.g. airports), you are encouraged to ask for authorisation to use the Wireless LAN device prior to turning on the equipment.

Safety Instruction for Wireless Products

If your computer has a wireless function, all safety instructions must be read carefully and must be fully understood, before you attempt to use it. This manual contains the safety instructions that must be observed in order to avoid potential hazards that could result in personal injuries or could damage your Wireless Products.

TECRA A3/S2 xxi

Limitation of Liability

For damage occurring due to an earthquake or thunder, fire beyond our responsibility, action by third party, other accident, intentional or accidental mistakes by a user, misuse, use under abnormal conditions, we do not take any responsibility.

For incidental damage (loss of business profit, business interruption, etc.) occurring due to use or disability of the product, we do not take any responsibility.

For damage occurring due to non observance of the contents described in the instruction manual, we do not take any responsibility.

For damage occurring due to erroneous operation or hang up caused by use in combination with products not related to our company, we do not take any responsibility.

Usage Restrictions

Do not use the Wireless Products for controlling the following equipment:

■ Equipment directly linked with human life corresponding to the following.

■ Medical equipment such as life support systems, equipment used in

operations, etc.

■ Exhaust systems for gases such as poisonous gas etc. and exhaust

systems for smoke.

■ Equipment that must be set up in compliance with various laws such

as the Fire Services Act, the Construction Standard Act, etc.

■ Equipment corresponding to that mentioned above.

■ Equipment linked with human safety or having a serious influence on the

safe maintenance of public function, etc., because it is not designed or manufactured for this type of use.

■ Traffic control equipment for air, railroad, road, marine transport, etc.

■ Equipment used in atomic power plants etc.

■ Equipment corresponding to that mentioned above.

TECRA A3/S2 xxii

Warning

Turn OFF the Wireless Communication switch of Wireless Products in a congested place, such as a crowded commuter train.

Keep this product away from a cardiac pacemaker at least 22cm. Radio waves can potentially affect cardiac pacemaker operation, thereby

causing respiratory troubles. Turn OFF the Wireless communication switch inside a medical facility or

near medical electric equipment. Do not bring medical electric equipment close to the product.

Radio waves can potentially affect medical electric equipment, thereby causing an accident due to malfunction.

Turn OFF the Wireless communication switch near an automatic door, fire alarm or other automatic control equipment.

Radio waves can potentially affect automatic control equipment, thereby causing an accident due to malfunction.

Do not turn ON the Wireless Communication switch in aircraft or in places that generate or can generate radio interference.

Radio waves can potentially affect them, causing an accident due to malfunction.

Monitor possible radio interference or other troubles to other equipment while the product is used. If any effect is caused, turn OFF the Wireless Communication switch.

Otherwise, radio waves can potentially affect other equipment, thereby causing an accident due to malfunction.

When using the product in a car, check with the automobile dealer if the car has an adequate electromagnetic compatibility (EMC).

Radio waves of the product can potentially hamper safe driving. Depending on car model, the product can rarely affect car electronic

equipment if it is used in a car.

Note

Do not use this product in the following places: Near a microwave oven or other environment which generates a magnetic

field. Near any place or equipment that generates static electricity or radio

interference. Depending on the environment, in a place where radio waves cannot reach

the product.

TECRA A3/S2 xxiii

TECRA A3/S2

Preface

Manual contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxxi

Conventions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .xxxii

Abbreviations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxxii

Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxxii

Keys. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxxii

Key operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxxii

Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxxii

Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .xxxiii

Equipment checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxxiv

Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .xxxiv

Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .xxxiv

Chapter 1: TECRA A3/S2 Features

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

Special features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-10

Utilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-12

Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-14

Chapter 2: The Grand Tour

Front with the display closed. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

Left side . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4

Right side . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6

Back side . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7

Underside. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8

Front with the display open . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-10

Keyboard Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12

Optical Media drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12

Region codes for DVD drives and media. . . . . . . . . . . . . . . . . . . . . 2-12

Writable discs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-13

CDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-13

User’s Manual xxiv

DVDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-13

Formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-13

CD-RW/DVD-ROM drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-13

DVD-ROM drive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-14

DVD±R/±RW (DVD Dual) drive supporting Double Layer . . . . . . . . 2-14

DVD Super Multi drive supporting Double Layer . . . . . . . . . . . . . . . 2-15

DVD Super Multi drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-15

Chapter 3: Getting Started

Setting up your work space . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

General conditions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2

Placement of computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2

Seating and posture. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3

Lighting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3

Work habits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4

Connecting the AC adaptor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5

Opening the display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6

Turning on the power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6

Starting up for the first time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7

Turning off the power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7

Shut Down mode (Boot mode) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7

Hibernation mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8

Standby mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-10

Restarting the computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-11

Restoring the preinstalled software. . . . . . . . . . . . . . . . . . . . . . . . . . 3-12

Restoring from the Product Recovery Media. . . . . . . . . . . . . . . . . . 3-12

Restoring from Recovery HDD . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-13

Chapter 4: Operating Basics

Using the TouchPad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1

TOSHIBA Dual Pointing Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2

Using the TouchPad. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2

Using the AccuPointII Pointing device . . . . . . . . . . . . . . . . . . . . . . . . 4-3

AccuPointII Pointing device precautions . . . . . . . . . . . . . . . . . . . . . . 4-3

Replacing the cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4

Using the internal modem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4

IMPORTANT SAFETY INSTRUCTIONS. . . . . . . . . . . . . . . . . . . . . . 4-5

Region selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5

Properties menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5

Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6

Modem Selection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6

Connecting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6

Disconnecting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7

TECRA A3/S2 xxv

LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8

Connecting LAN cable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8

Disconnecting LAN cable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9

Wireless LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9

Wireless LAN disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9

Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9

Wireless communication switch. . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-10

Wireless communication LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-10

Changing Slim Select Bay modules . . . . . . . . . . . . . . . . . . . . . . . . . 4-10

Removing a module. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-10

Inserting a module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-11

Using optical media drives. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-12

Loading compact discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-13

Removing compact discs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-15

Writing CDs on a CD-RW/DVD-ROM drive . . . . . . . . . . . . . . . . . . . . 4-16

Important message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-16

Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-16

Before writing or rewriting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-16

When writing or rewriting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-17

Writing CD/DVDs on a DVD±R/±RW drive supporting

Double Layer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-18

Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-18

Before writing or rewriting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-18

When writing or rewriting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-20

Writing CD/DVDs on a DVD Super Multi drive and a DVD Super

Multi drive supporting Double Layer. . . . . . . . . . . . . . . . . . . . . . . . . 4-21

Important message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-21

Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-21

Before writing or rewriting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-21

When writing or rewriting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-23

RecordNow! Basic for TOSHIBA . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-24

Data Verification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-25

DLA for TOSHIBA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-25

Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-25

Installing InterVideo WinDVD Creator Platinum . . . . . . . . . . . . . . . . 4-25

When using WinDVD Creator Platinum 2 . . . . . . . . . . . . . . . . . . . . 4-26

How to make a DVD-Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-26

How to learn more about InterVideo WinDVD Creator Platinum 2 . 4-26

Important information for use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-27

Media Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-28

CD/DVDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-28

Diskettes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-29

TV-Out. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-29

TECRA A3/S2 xxvi

Setting up more than one display . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-30

Buttons. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-31

Cleaning the computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-32

Moving the computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-32

Chapter 5: The Keyboard

Typewriter keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1

F1 ... F12 function keys. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2

Soft keys: Fn key combinations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2

Emulation keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2

Hotkeys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3

Windows special keys. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4

Keypad overlay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5

Turning on the overlays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5

Temporarily using normal keyboard (overlay on). . . . . . . . . . . . . . . . 5-6

Temporarily using overlay (overlay off) . . . . . . . . . . . . . . . . . . . . . . . 5-6

Chapter 6: Power System

Power conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1

Power indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2

Battery indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2

DC IN indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3

Power indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3

Battery types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3

Battery pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3

Real Time Clock battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4

Care and use of the battery pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-5

Safety precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-5

Charging the batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7

Monitoring battery capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-9

Maximizing battery operating time . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-9

Retaining data with power off (standby mode). . . . . . . . . . . . . . . . . 6-10

Extending battery life . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-10

Replacing the battery pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-10

Removing the battery pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-10

Installing the battery pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-12

Power-up modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-12

Panel power off/on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-13

System automatic Standby/Hibernation . . . . . . . . . . . . . . . . . . . . . . 6-13

Chapter 7: HW Setup

Accessing HW Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1

HW Setup Window. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1

TECRA A3/S2 xxvii

Chapter 8: Optional Devices

PC cards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2

Installing a PC card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2

Removing a PC card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-3

SD/MMC/SM/MS/MS Pro/xD Memory Cards . . . . . . . . . . . . . . . . . . . . 8-4

Installing a Memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-4

Removing a Memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-5

Memory card care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-5

Memory expansion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-6

Installing memory module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-6

Removing memory module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-8

Additional battery pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-9

Additional AC adaptor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-9

Expansion port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-10

External monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-10

Television . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-10

i.LINK (IEEE1394) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-11

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-11

Connecting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-11

Disconnecting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-12

Security lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-12

Advanced Port Replicator III. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-13

Slim Select Bay HDD adaptor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-13

Chapter 9: Troubleshooting

Problem solving process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1

Preliminary checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-2

Analyzing the problem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-2

Hardware and system checklist. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-3

System start-up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-4

Self test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-4

Power. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-5

Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-7

LCD panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-7

Hard disk drive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-8

CD-RW/DVD-ROM drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-9

DVD±R/±RW drive (DVD Dual Drive) . . . . . . . . . . . . . . . . . . . . . . . 9-10

DVD Super Multi drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-11

Diskette drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-12

Sound system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-12

PC Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-13

Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-13

Memory cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-13

TECRA A3/S2 xxviii

Pointing device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-14

USB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-15

Standby/Hibernation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-15

Real Time Clock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-16

Memory expansion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-16

Modem. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-17

LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-17

Wireless LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-18

Monitor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-18

Docking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-18

i.LINK (IEEE1394) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-19

TOSHIBA support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-19

Before you call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-19

Where to write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-19

Appendix A: Specifications

Appendix B: Display Modes

Appendix C: AC Power Cord and Connectors

Appendix D: If your computer is stolen

Glossary

TECRA A3/S2 xxix

TECRA A3/S2

Preface

Congratulations on your purchase of the TECRA A3/S2 computer. This powerful notebook computer provides excellent expansion capability, including multimedia devices, and it is designed to provide years of reliable, high-performance computing.

This manual tells how to set up and begin using your TECRA A3/S2 computer. It also provides detailed information on configuring your computer, basic operations and care, using optional devices and troubleshooting.

If you are a new user of computers or if you're new to portable computing, first read over the TECRA A3/S2 Features and The Grand Tour chapters to familiarize yourself with the computer's features, components and accessory devices. Then read Getting Started for step-by-step instructions on setting up your computer.

If you are an experienced computer user, please continue reading the preface to learn how this manual is organized, then become acquainted with this manual by browsing through its pages. Be sure to look over the Special features section of the Chapter 1 TECRA A3/S2 Features, to learn about features that are uncommon or unique to the computer.

User’s Manual xxx

Manual contents

This manual has nine chapters, four appendixes and a glossary. Here is a brief introduction to preview the details of each chapter. Chapter 1, TECRA A3/S2 Features, is an overview of the computer's special

features, utilities, and options. Chapter 2, The Grand Tour, identifies the components of the computer and

briefly explains how they function. Chapter 3, Getting Started, provides a quick overview of how to begin

operating your computer and gives tips on safety and designing your work area. Be sure to read the sections on setting up the operating system and on restoring the preinstalled software.

Chapter 4, Operating Basics, includes instructions on using the following devices: The internal modem, LAN, wireless LAN,optical media drives, and TV-Out function. It also provides tips on care of the computer, diskettes and DVD/CD-ROMs.

Chapter 5, The Keyboard, describes touchpad and special keyboard functions including the keypad overlay and hotkeys.

Chapter 6, Power System, gives details on the computer's power resources. Chapter 7, HW Setup, introduces you to the TOSHIBA Hard Ware Setup

program. Chapter 8, Optional Devices, describes the optional hardware available. Chapter 9, Troubleshooting, provides helpful information on how to perform

some diagnostic tests, and suggests courses of action if the computer doesn't seem to be working properly.

The Appendixes provide technical information about your computer. The Glossary defines general computer terminology and includes a list of

acronyms used in the text.

Preface

TECRA A3/S2 xxxi

Conventions

This manual uses the following formats to describe, identify, and highlight terms and operating procedures.

Abbreviations

On first appearance, and whenever necessary for clarity, abbreviations are enclosed in parentheses following their definition. For example: Read Only Memory (ROM). Acronyms are also defined in the Glossary.

Icons

Icons identify ports, dials, and other parts of your computer. The indicator panel also uses icons to identify the components it is providing information on.

Keys

The keyboard keys are used in the text to describe many computer operations. A distinctive typeface identifies the key top symbols as they appear on the keyboard. For example, Enter identifies the Enter key.

Key operation

Some operations require you to simultaneously use two or more keys. We identify such operations by the key top symbols separated by a plus sign (+). For example, Ctrl + C means you must hold down Ctrl and at the same time press C. If three keys are used, hold down the first two and at the same time press the tddhird.

Preface

DISKCOPY A: B: When procedures require an action such as

clicking an icon or entering text, the icon's name or the text you are to type in is represented in the type face you see to the left.

Display

ABC

TECRA A3/S2 xxxii

Names of windows or icons or text generated by the computer that appears on its display screen is presented in the type face you see to the left.

Messages

Messages are used in this manual to bring important information to your attention. Each type of message is identified as shown below.

Pay attention! A caution informs you that improper use of equipment or failure to follow instructions may cause data loss or damage your equipment.

Please read. A note is a hint or advice that helps you make best use of your equipment.

Preface

TECRA A3/S2 xxxiii

Equipment checklist

Carefully unpack your computer. Save the box and packing materials for future use. Check to make sure you have all the following items:

Hardware

■ TECRA A3/S2 Series Portable Personal Computer

■ Universal AC adaptor and power cord

■ AccuPoint cap (pointing device) cap *

■ Slim Select Bay weight saver module *

■ Modular cable for modem *

* indicates an optional part that is dependant on the model purchased.

Software

Microsoft® Windows® XP Home Edition/Professional Service Pack 2

■ The following software preinstalled on your hard disk:

■ Microsoft

■ DVD Video Player

■ TOSHIBA Power Saver

■ TOSHIBA Assist

■ TOSHIBA Controls

■ TOSHIBA PC Diagnostic Tool

■ TOSHIBA TouchPad On/Off Utility *

■ TOSHIBA Zooming Utility

■ TOSHIBA SD Memory Card Format

■ TOSHIBA Acoustic Silencer

■ TOSHIBA Hotkey Utility

■ TOSHIBA Accessibility Utility

■ TOSHIBA HW Setup

■ TOSHIBA Bay Service *

■ TOSHIBA Mobile Extension3 (for APRIII)

■ TOSHIBA Dual Point Device *

■ Online manual

■ Display Driver

■ Either TouchPad driver or Dual Point Device driver

■ Sound driver

Windows® XP Home Edition/Professional

Preface

TECRA A3/S2 xxxiv

Preface

■ Miscellaneous drivers (depending on the model you purchased:

Modem, LAN, Memory Media, Wireless LAN, Multiple Digital Media Card Slot)

■ Online help

Other software may pre-installed dependant on the model purchased.

The system may not function properly if you use drivers that are not preinstalled or distributed by TOSHIBA

Documentation

■ TECRA A3/S2 Series User's Manual

■ TECRA A3/S2 Quickstart

■ Safety Instruction Manual

■ Warranty information

Backup Media and Additional Software

■ Product Recovery Disc *

■ Additional Software CD *

■ Express Media Player Recovery CD *

* indicates an optional part that is dependant on the model purchased.

If any of the items are missing or damaged, contact your dealer immediately.

TECRA A3/S2 xxxv

TECRA A3/S2

Chapter 1

TECRA A3/S2 Features

This chapter provides the information of computer's features, utilities, and options.

Some of the features described in this manual may not function properly if you use an operating system that was not preinstalled by TOSHIBA.

Features

The TECRA A3/S2 series computer uses TOSHIBA's advanced Large Scale Integration (LSI), Complementary Metal-Oxide Semiconductor (CMOS) technology extensively to provide compact size, minimum weight, low power usage, and high reliability. This computer incorporates the following features and benefits:

Processor

Depending on the model you purchased: Mobile Intel Intel® Pentium® M Processor 730/740/750/760/

770

Celeron® M Processor 350/360/370

Chip Set

Mobile Intel Chipset

ENE KB910 for Keyboard Controller, Battery management Unit, and RTC.

ALC250 for AC97 CODEC. TI PCI7411/7421 for Multiple Digital Media Card

and IEEE 1394 controller. Marvell 8036/8053 on board LAN.

User’s Manual 1-1

915PM/915GM/910GML Express

TECRA A3/S2 Features

Memory

Slot Two SODIMM with 256MB/512MB/1GB

Max. upgrade to 2GB with 2 SODIMM sockets

L2 Cache 1MB L2 Cache (Intel

2MB L2 Cache (Intel® Pentium® M Processor)

Video Controller Depending on the model you purchased:

Mobile Intel® 915GM Express Chipset Mobile Intel® 910GML Express Chipset ATI : MOBILITY

128MB MOBILITY

or 128MB. NVIDIA: GeForceTM Go 6600GPU with 64MB or 128MB

GeForce

Go 6200 GPU with Turbo Cache with

32MB or 64MB for local cache

Video RAM Depending on the model you purchased:

Intel Graphic model, Video RAM up to128MB.integrated solution and

share with main memory for Intel 915GM/ 910GML.

NVIDIA and ATI Graphic model, external 32/64/128MB VGA DDR RAM for VGA

chip.

Celeron® M Processor)

RADEON® X600 with 64MB or

RADEON® X300 with 32MB, 64MB,

BIOS

1024KB Flash ROM for system BIOS. Suspend to RAM/Disk. Password protection (System). Various hot key for system control. Refreshable Complete ACPI 1.0b Function

TECRA A3/S2 1-2

Power

TECRA A3/S2 Features

Battery Pack 12-cell Li-Ion smart battery pack with

RTC Battery The computer has an internal battery to back up

AC adaptor The universal AC adaptor provides power to the

10.8V*8600mAh capacity or 6-cell Li-Ion smart battery pack with 10.8V*4300mAh capacity (depending on the model you purchased)

Approximately 12 hours or longer charging time to 100% battery capacity (system on).

Approximately 4 hours charge time to 100% battery capacity (system off)

Approximately 2 days discharge time in standby mode for 12-cell battery and 1 days for 6-cell battery.

Discharge time in shutdown mode is approximately 1 month.

the internal Real Time Clock (RTC) and calender. It is good with no external power source for 1 month on average.

system and recharges the batteries when they are low. It comes with a detachable power cord.

FDD Device

Optional External USB FDD

TouchPad

The control buttons and TouchPad or Dual Point device in the palm rest enable control of the onscreen pointer.

TECRA A3/S2 1-3

TECRA A3/S2 Features

Display

15.0" TFT screen with a resolution of 1600 horizontal x1200 vertical pixels UXGA

15.0" TFT screen with a resolution of 1400 horizontal x1050 vertical pixels SXGA+

15.0" TFT screen with a resolution of 1024 horizontal x768 vertical pixels XGA

15.0" TFT screen with a resolution of 1024 horizontal x768 vertical pixels XGA (CSV)

15.0" TFT screen with a resolution of 1024 horizontal x768 vertical pixels XGA (HCSV)

14.1" TFT screen with a resolution of 1024 horizontal x768 vertical pixels XGA

14.1" TFT screen with a resolution of 1400 horizontal x1050 vertical pixels SXGA+

Mobile Intel®910GML Express Chipset does not support UXGA panel.

TECRA A3/S2 1-4

Disks

Fixed hard disk Either one –

30.0 billion bytes (27.94GB)

40.0 billion bytes (37.26GB)

60.0 billion bytes (55.88GB)

80.0 billion bytes (74.52GB)

100.0 billion bytes (93.16GB)

120.0 billion bytes (111.78 GB) Bus Master IDE

9.5m/m 2.5" HDD Support Ultra DMA 100

CD-RW/DVD-ROM drive

Some models are equipped with a full- size CD-RW/DVD-ROM module that lets you record data to rewritable CD/CD-RWs as well as run either 12 cm (4.72") or 8 cm (3.15") CD/DVDs without using an adaptor. It reads DVD-ROMs at maximum 8 speed and CD-ROMs at maximum 24 speed. It writes CD-R at up to 24 speed, CD-RW at up to 24 speed. This drive supports the same formats as the DVD-ROM drive.

■ DVD-ROM ■ DVD-Video

■ DVD-R ■ DVD-RW

■ CD-DA ■ CD-Text

■ DVD-RAM

■ Photo CD (single/multi-session)

■ CD-ROM Mode1, Mode2

■ CD-ROMXA Mode2 (Form1, Form2)

■ Enhanced CD (CD-EXTRA)

TECRA A3/S2 Features

TECRA A3/S2 1-5

TECRA A3/S2 Features

DVD±R/±RW (DVD Dual) drive supporting Double Layer

DVD Super Multi drive supporting Double Layer

Some models are equipped with a full- size DVD Dual module that lets you record data to rewritable CD/DVDs as well as run either 12 cm (4.72") or 8 cm (3.15") CD/DVDs without using an adaptor. It reads DVD-ROMs at maximum 8 speed and CD-ROMs at maximum 24 speed. It writes CD-R at up to 24 speed, CD-RW at up to 24 speed, DVD-R at maximum 8 speed, DVD-RW at maximum 4 speed, DVD+R at maximum 8 speed, DVD+RW at maximum 4 speed, and DVD+R (Double Layer) at maximum 2.4 speed. This drive supports the same formats as the DVD-ROM drive.

■ DVD-ROM ■ DVD-Video

■ DVD-R ■ DVD-RW

■ DVD+R ■ DVD+RW

■ CD-DA ■ CD-Text

■ DVD+R (Double Layer)

■ Photo CD (single/multi-session)

■ CD-ROM Mode1, Mode2

■ CD-ROMXA Mode2 (Form1, Form2)

■ Enhanced CD (CD-EXTRA)

Some models are equipped with a full-size DVD Super Multi drive module that lets you record data to rewritable CD/DVDs as well as run either 12cm(4.72") or 8cm(3.15") CD/DVDs without using an adaptor. It reads DVD-ROMs at maximum 8 speed and CD-ROMs at maximum 24 speed. It writes CD-R at up to 24 speed, CD-RW at up to 10 speed, DVD-R at maximum 8 speed, DVD-RW at maximum 4 speed, DVD-RAM at maximum 3 speed, DVD+RWat maximum 4 speed, DVD+R at maximum 8 speed, and DVD+R (Double Layer) at maximum 2.4 speed. This drive supports the same formats as the DVD-ROM drive.

■ DVD-ROM ■ DVD-Video

■ DVD-R ■ DVD-RW

■ DVD+R ■ DVD+RW

■ DVD-RAM ■ DVD+R (Double Layer)

■ CD-R ■ CD-RW

■ CD-DA ■ CD-Text

■ Photo CD (single/multi-session)

■ CD-ROM Mode1, Mode2

■ CD-ROMXA Mode2 (Form1, Form2)

■ Enhanced CD (CD-EXTRA)

TECRA A3/S2 1-6

TECRA A3/S2 Features

DVD Super Multi drive

Some models are equipped with a full- size DVD Dual module that lets you record data to rewritable CD/DVDs as well as run either 12 cm (4.72") or 8 cm (3.15") CD/DVDs without using an adaptor. It reads DVD-ROMs at maximum 8 speed and CDROMs at maximum 24 speed. It writes CD-R at up to 24 speed, CD-RW at up to 10 speed, DVD-R at maximum 8 speed, DVD-RW at maximum 4 speed, DVD+R at maximum 8 speed, and DVD+RW at maximum 4 speed. This drive supports the same formats as the DVD-ROM drive.

■ DVD-ROM ■ DVD-Video

■ DVD-R ■ DVD-RW

■ DVD+R ■ DVD+RW

■ CD-DA ■ CD-Text

■ Photo CD(single/multi-session)

■ CD-ROM Mode1, Mode2

■ CD-ROMXA Mode2(Form1, Form2)

■ Enhanced CD(CD-EXTRA)

DVD-ROM drive Some models are equipped with a full- size DVD

ROM module. It reads DVD-ROMs at maximum 8 speed and CD-ROMs at maximum 24 speed. This drive supports the formats as follows.

■ DVD-ROM ■ DVD-Video

■ DVD-R ■ DVD-RW

■ CD-DA ■ CD-Text

■ Photo CD (single/multi-session)

■ CD-ROM Mode1, Mode2

■ CD-ROMXA Mode2 (Form1, Form2)

■ Enhanced CD (CD-EXTRA)

Computers in this series can be configured with multiple types of optical media drive. For more information on the optical media drives available, talk to your dealer. More information on using the optical media drive can be found in Chapter 4, Operating Basics.

TECRA A3/S2 1-7

Slots (depending on configuration)

TECRA A3/S2 Features

PC Card Accommodate one type II device or two type II

Multiple Digital Media Card (SD/MMC/SM/ MS/MS Pro/xD)

devices/one type III device.

This slot lets you easily transfer data from devices, such as digital cameras and Personal Digital Assistants, that use flash-memory.

You can use memory module in this slot.

Ports (depending on configuration)

Docking Special port for connecting an optional Port

Replicator.

External monitor 15-pin analog VGA port supports VESA DDC2B

compatible functions.

Parallel This port is used to connect a parallel printer or

other parallel device.

Universal Serial Bus The computer provides Universal Serial Bus

(USB) ports that comply with the USB 2.0 standard, which enables data transfer speeds more than 40 times faster than USB 1.1 (which this computer also supports.) The USB drives may be used to transfer data at Low, Full, and High speeds.

Serial This port lets you connect the computer to a serial

i.LINK (IEEE1394) This port enables high-speed data transfer directly

TV Out

port devices.

from external devices, such as digital video cameras.

The 4-pin S-Video port is compatible with PAL or NTSC TV standard, supporting Macrovision copy protection.

Multimedia

Sound system Windows sound system compatible sound system

provides internal speakers and an internal microphone as well as jacks for an external microphone and headphones.

Headphone jack A standard 3.5 mm headphone jack.

Microphone jack A standard 3.5 mm mini microphone jack enables

TECRA A3/S2 1-8

connection of monaural microphone input.

TECRA A3/S2 Features

Communications (depending on configuration)

Modem An internal modem provides capability for data

LAN The computer has built-in support for Ethernet

Wireless LAN A wireless LAN mini-PCI card that is compatible

Bluetooth Bluetooth is a short-range wireless technology

and fax communication. It supports V.90 or V.92 depending on the region. The speed of data transfer and fax depends on analog telephone line conditions. It has a modem jack for connecting to a telephone line.

LAN (10Mbps, 10BASE-T), Fast Ethernet LAN (100Mbps, 100BASE-TX), or Gigabit Ethernet LAN (1000Mbps, 1000BASE-T).

with other LAN systems that support the following:

802.11a+g wireless LAN module/802.11g wire less LAN module. It has a Frequency Channel Selection (2.4 or 5 GHz) and allows roaming over multiple channels.

used to create PANs (Personal Area Networks) among your devices, and with other nearby devices like mobile computers, mobile phones, and digital cameras.

Security

Boot-up password protection. Two level password architecture.

Security Lock Slot

Receives an optional security lock in order to anchor the computer to a desk or other large, heavy object.

TECRA A3/S2 1-9

Special features

The following features are either unique to TOSHIBA computers or are advanced features, which make the computer more convenient to use.

Hotkeys Key combinations let you quickly modify the

TECRA A3/S2 Features

system configuration directly from the keyboard without running a system configuration program.

Display Automatic Power off

Hard Disk Drive Automatic Power off

System Automatic Standby/Hibernation

Power-on Password Two levels of password security are available:

Battery Save Mode This feature lets you save battery power. You can

Instant Security A hotkey function blanks the screen providing

Panel Power Off/On In AC mode, this feature turns power to the

This feature automatically cuts off power to the internal display when there is no input from the keyboard or pointing device for a time specified. Power is restored when any key is pressed or when there is input from a pointing device. You can specify the time in the TOSHIBA Power Saver utility.

This feature automatically cuts off power to the hard disk drive when it is not accessed for a time specified. Power is restored when the hard disk is accessed. You can specify the time in the TOSHIBA Power Saver utility.

This feature automatically brings the system to Standby mode or Hibernation mode when there is no input or hardware access for a time specified. You can specify the time and select either System Standby or System Hibernate in the TOSHIBA Power Saver utility.

supervisor and user. This feature prevents unauthorized access to your computer.

specify the Power Save Mode in the Profile item in TOSHIBA Power Saver.

quick and easy data security.

computer off when the display panel is closed and turns it back on when the panel is opened.

In Battery mode, the Hibernation feature turns power to the computer off when the display panel is closed and cannot turn it back on when the panel is opened. The Standby feature turns power to the computer off when the display panel is closed and turns it back on when the panel is opened.

You can specify the setting in the TOSHIBA

Power Saver utility.

TECRA A3/S2 1-10

TECRA A3/S2 Features

Low Battery Automatic Hibernation

When battery power is exhausted to the point that computer operation cannot be continued, the system automatically enters Hibernation and shuts down. You can specify the setting in the

TOSHIBA Power Saver utility.

Hibernation This feature lets you turn off the power without

exiting from your software. The contents of main memory are saved to the hard disk. When you turn on the power again, you can continue working right where you left off.

Standby In Standby mode, power to the system remains on,

but the CPU and all other devices are in sleep mode. When the computer is in standby mode, the Power LED flashes in amber. The computer enters Standby mode regardless of the Hibernate setting.

■ Before entering Standby mode, be sure to save your data.

■ Do not install or remove a memory module while the computer is in

Standby mode. The computer or the module could be damaged.

■ Do not remove the battery pack while the computer is in Standby mode.

Data in memory will be lost.

TECRA A3/S2 1-11

Utilities

TECRA A3/S2 Features

This section describes preinstalled utilities and tells how to start them. For details on operations, refer to each utility's online manual, help files or readme files.

TOSHIBA Power Saver

TOSHIBA Controls This utility allows you to assign functions on your

DVD Player The DVD Video Player is used to play DVD-Video.

ConfigFree ConfigFree is a suite of utilities to allow easy

TOSHIBA Touchpad On/Off Utility

RecordNow! Basic for TOSHIBA

There are two ways to display the Windows XP Control Panel. The default is Category View.

TOSHIBA Power Saver utility is under the Performance and Maintenance item.

computer:

■ TOSHIBA Assist button

There are some items in the pull down menu list. The default value of TOSHIBA Assist button is TOSHIBA Assist.

■ TOSHIBA Presentation button

There are some items in the pull down menu list. The default value of TOSHIBA Presentation button is ‘same Image (1024x768)’.

It has an on-screen interface and functions. Click

Start, point to All Programs, point to InterVideo WinDVD Creator 2 then click Inter Video WinDVD Creator.

control of communication device and network connections. ConfigFree also allows you to find communication problems and create profiles for easy switching between location and communication networks.

To start ConfigFree, click the Windows start button, point to All Programs, point to TOSHIBA, point to Networking and click ConfigFree.

Depending on the model you purchased: Pressing Fn+F9 in the Windows environment

enables or disables the TouchPad function. When you press these hot keys, the current setting will be changed and be displayed as an icon.

You can create CD/DVDs in several formats including audio CDs that can be played on a standard stereo CD player and data CD/DVDs to store the files and folders on your hard disk drive. This software can be used on a model with DVD-ROM&CD-R/RW drive, DVD-R/-RW drive, DVD+-R/+-RW drive and DVD Super Multi drive.

TECRA A3/S2 1-12

TECRA A3/S2 Features

DLA for TOSHIBA DLA (Drive Letter Access) is the packet writing

software which provides the function which writes files and/or folders to DVD+RW, DVD-RW or CDRW disc via a drive letter like a floppy disk or other removable disks.

TOSHIBA Zooming Utility

This utility allows you to enlarge or reduce the icon size on the desktop or the application window.

TOSHIBA HW Setup This program lets you customize your hardware

settings according to the way you work with your computer and the peripherals you use. To start the utility, To access this utility, click Start, click

Control Panel, click Other Control Panel Options and select the TOSHIBA HW Setup icon.

TOSHIBA Accessibility

This utility lets you make the Fn key sticky, that is, you can press it once, release it, and then press an "F number" key. The Fn key remains active until another key is pressed.

TOSHIBA Dual Pointing Device Utility

Depending on the model you purchased: This utility has the function to disable/enable the

Toshiba Dual Pointing Device by pressing the Fn+F9 keys. To custom the functions of TOSHIBA Dual Pointing Device easily.

TOSHIBA Assist TOSHIBA Assist is a graphical user interface that

provides easy access to help and services.

CD/DVD Drive Acoustic Silencer

This utility has the function to set up the speed (read) of CD/DVD drive.

You can set up one of the modes: [Normal Mode] can read data early, and [Quiet Mode] can lessen noise.

TOSHIBA Bay Service

Depending on the model you purchased: TOSHIBA Bay Service Utility supports the warm

swap function in slim select bay.

TOSHIBA Mobile Extension 3

Depending on the model you purchased: Toshiba Mobile Extension 3 allows you to connect

your notebook PCs to a docking device.

TECRA A3/S2 1-13

Options

TECRA A3/S2 Features

You can add a number of options to make your computer even more powerful and convenient to use. The following options are available:

Memory Modules Two memory modules can be installed in the

computer

The computer comes with at least one memory module pre-installed.

Use only PC2700 compatible DDR memory modules. See your TOSHIBA dealer for details

Battery Pack An additional battery pack can be purchased from

AC Adaptor If you use your computer at more than one site

USB FDD Kit Lets you attach a floppy diskette device to your

Wireless LAN A wireless LAN mini-PCI card that is compatible

Bluetooth Bluetooth wireless technology eliminates the need

Slim Selectable Bay Expand the functionality of your system with a 2nd

Advanced Port Replicator III

your TOSHIBA dealer. Use it as a spare to increase your computer operating time.

frequently, it may be convenient to purchase an additional AC adaptor for each site so you will not have to carry the adaptor with you.

computer by means of a USB cable.

with other LAN systems. Supports 802.11a+g wireless LAN module or 802.11g wireless LAN module.

for cables between electronic devices, such as computers and printers. Bluetooth provides fast, reliable, and secure wireless communication in a small space.

hard drive, DVD super multi drive, CD-RW/DVDROM drive, DVD Multi drive, DVD+R/+RW drive, or DVD-R/-RW drive.

User can easy to swap it at any time.

The TOSHIBA Advanced Port Replicator III is an adjustable port replicator designed to work with your notebook PC form factors and port configurations. While providing fast access to your desktop environment, it eliminates the hassle of connecting multiple cables time after time. This saves wear-and-tear both on notebook ports, as well as, the cable plugs themselves.

TECRA A3/S2 1-14

TECRA A3/S2

Chapter 2

The Grand Tour

This chapter identifies the various components of your computer. Become familiar with each component before you operate the computer.

Front with the display closed

The following figure shows the computer front with its display panel in the closed position.

1 2

4 5

1. DC-IN LED

2. P

OWER LED

3. B

ATTERY LED

4. O

PTICAL MEDIA D RIVE LED *

5. H

ARD DISK DRIVE LED

* available depending on the model you purchased

Front of the computer with display closed

User’s Manual 2-1

NFRARED PORT *

6. I

7. W

IRELESS COMMUNICATION SWITCH AND LED *

8. M

ICROPHONE JACK

9. HEADPHONE JACK

10. I

NTERNAL MICROPHONE *

11. V

OLUME CONTROL

The Grand Tour

DC-In LED The DC-IN LED indicates the computer is

connected to the AC adapter and it is plugged into an AC power source.

Off On

Power LED The Power LED flashes amber while the system

is in Standby mode. The LED turns off when the computer is turned off or in Hibernation mode. In normal operating mode, the LED is green.

Battery LED The Battery LED indicates the battery's current

charge/discharge status. It lights green when the battery is fully charged. It lights amber while the battery is being charged from the AC adapter. It flashes amber when the battery capacity is low.

Hard Disk Drive LED The Hard Disk Drive LED glows green when the

computer is accessing the hard disk.

Infrared port This Infrared port is compatible with Infrared Data

Association (IrDA) Fast InfraRed (FIR) standards. It enables cableless 4 Mbps data transfer with IrDA

1.1 compatible external devices.This only applies the infrared model of the computer. Not all versions have this feature.

(This function is available depending on the model you purchased.)

Wireless Communication LED

The Wireless Communication LED lights up when he wireless LAN is on.

(This function is available depending on the model you purchased.)

Wireless Communication Switch

The Wireless Communication Switch turns on the wireless networking transceiver.

(This function is available depending on the model you purchased.)

Headphone Jack The Headphone Jack lets you connect stereo

headphones or other audio-output devices, such as external speakers. Connecting headphones or other devices to this jack automatically disables the internal speakers.

Microphone Jack A standard 3.5 mm mini microphone jack enables

connection of a three conductive type mini-jack for a monaural microphone.

TECRA A3/S2 2-2

Internal Microphone Built-in Internal Microphone.

(This function is available depending on the model you purchased.)

The Grand Tour

Volume Control Use this dial to adjust the volume of the stereo

speakers. The audio speakers. Volume can be controlled

either with the volume dial on the front side of the computer, or with the Volume setting in Windows XP.

TECRA A3/S2 2-3

Left side

The Grand Tour

The following figure shows the computer left side

IDEO PORT

The left side of the computer

ULTIPLE DIGITAL MEDIA CARD SLOT *

5. M

6. M

ULTIPLE DIGITAL MEDIA CARD SLOT ACCESS LED *

I.LINK PORT *

1. PARALLEL PORT *

2. S-V

3. FAN VENT

4. PC CARD SLOT *

* available depending on the model you purchased

Parallel Port This Centronics-compatible 25-pin parallel port is

used to connect a parallel printer or other parallel device. This port supports Extended Capabilities Port (ECP) standard.

(This function is available depending on the model you purchased.)

S-Video Port Plug a 4-pin S-video cable into this connector for

output of NTSC or PAL signal.

FAN Vent FAN Vent helps CPU keep from overheating.

To prevent possible over heating of the CPU, never block the fan vent.

PC card Slot A PC card slot can accommodate two 5 mm PC

cards (Type II) or one 10.5 mm PC card (Type III). You can install any industry standard PC card, such as a SCSI adaptor, Ethernet adaptor or flash memory card.

Depending on the model you purchased it is provides one type II or two type II or one type III pc card slot

Multiple Digital Media Card Slot

The Multiple Digital Media Card Slot allows you to use in digital still cameras and various forms of portable information equipment.

(This function is available depending on the model you purchased.)

TECRA A3/S2 2-4

The Grand Tour

Multiple Digital Media Card Slot Access LED

i.LINK (IEEE1394) Port

The Multiple Digital Media Card Slot Access LED lights up when the Multiple Digital Media Card is accessed.

(This function is available depending on the model you purchased.)

Connect an external device, such as a digital video camera to this port for high-speed data transfer. This only applies the i.LINK model of the computer.

(This function is available depending on the model you purchased.)

TECRA A3/S2 2-5

Right side

The following figure shows the computer right side

The Grand Tour

1. UNIVERSAL SERIAL BUS (USB) PORTS

PTICAL MEDIA DRIVE

2. O

3. U

NIVERSAL SERIAL BUS (USB) PORT OR SERIAL PORT *

* available depending on the model you purchased. Some models have no port

The right side of the computer

Universal Serial Bus (USB) Ports

The Universal Serial Bus (USB 2.0 and 1.1) port enables USB-equipped devices (such as

keyboards, mice, hard drives, scanners, and printers).

Optical Media Drive The computer is configured with a full-size optical

media drive module that lets you run either 12 cm (4.72") or 8 cm (3.15") discs without using an adaptor.

Universal Serial Bus (USB) Ports or Serial Port

This port supports the Universal Serial Bus (USB

2.0 and 1.1) port or Serial port. (This function is available depending on the model

you purchased.)

TECRA A3/S2 2-6

Back side

The following figure shows the computer back panel.

Security Lock A security cabel attaches to this port. The optional

1. SECURITY LOCK

2. MODEM JACK *

ACK *

3. LAN J

4. RGB (M

5. DC IN 15V JACK

* available depending on the model you purchased.

ONITOR) PORT

The back side of the computer

security cable anchors your computer to a desk or other large object to deter theft.

The Grand Tour

Modem Jack In areas where an internal modem is installed as

standard equipment, there is a modem jack that lets you use a modular cable to connect the modem directly to a telephone line.

(This function is available depending on the model you purchased.)

LAN Jack This jack lets you connect to a LAN. The adaptor

has built-in support for Ethernet LAN (10 megabits per second, 10BASE-T), Fast Ethernet LAN (100 megabits per second, 100BASE-TX), or Gigabit Ethernet LAN (1000 megabits per second, 1000BASE-T).

(This function is available depending on the model you purchased.)

RGB (Monitor) Port This 15-pin port lets you connect an external video

display to the computer.

DC IN 15V Jack The DC-IN socket is where you plug in the AC

adapter.

TECRA A3/S2 2-7

Underside

The following figure shows the underside of the computer. Make sure the display is closed before turning over your computer.

1. BATTERY PACK

ATTERY PACK LOCK

2. B

ATTERY PACK RELEASE LATCH

3. B

4. DOCKING PORT

The Grand Tour

5. EXPANSION MEMORY SOCKET

6. SLIM SELECT BAY LATCH *

7. S

LIM SELECT BAY LOCK *

OCKING HOLE

8. D

9. FAN VENT

* available depending on the model you purchased.

The underside of the computer

Battery Pack This is the battery pack, which powers the

computer when the AC adaptor is not connected. For detailed information on the battery pack, refer to Chapter 6, Power System.

Battery Pack Lock There are two battery latches that secure the

battery pack. To remove the battery pack, first slide the battery pack lock.

Battery Pack Release Latch

Second, hold and slide the battery pack release latch to left to remove the battery pack.

Docking Port Use this port to connect an optional Port

Replicator.

Keep foreign objects out of the docking port. A pin or similar object can damage the computer's circuitry.

TECRA A3/S2 2-8

The Grand Tour

Expansion Memory Socket

Use this socket to install a memory module to increase your computer's memory. Refer to the Memory Expansion section in Chapter 8, Optional Devices.

Slim Select Bay Latch

Slide this latch to remove the Select Bay. (This function is available depending on the model

you purchased.)

Slim Select Bay Lock To secure the Slim Select Bay.

(This function is available depending on the model you purchased.)

Docking Holes These holes ensure a proper connection between

the computer and an optional Port Replicator.

FAN Vent FAN Vent helps CPU keep from overheating.

To prevent possible over heating of the CPU, never block the fan vent.

TECRA A3/S2 2-9

Front with the display open

The following figure shows the front of the computer with the display open. To open the display, slide the display latch on the front of the display and lift up. Position the display at a comfortable viewing angle.

5 6

The Grand Tour

3 4

7 8

1. DISPLAY SCREEN

2. POWER BUTTON

3. TOSHIBA ASSIST BUTTON *

4. TOSHIBA P

5. A

CCUPOINTII POINTING DEVICE * CCUPOINTII CONTROL BUTTONS *

6. A

OUCHPAD

7. T

8. TOUCHPAD CONTROL BUTTONS

* available depending on the model you purchased.

The front with the display open

TECRA A3/S2 2-10

RESENTATION BUTTON *

The Grand Tour

Display Screen The LCD displays high-contrast text and graphics.

Refer to Appendix B. When the computer operates on the AC adaptor the display screen's image will be somewhat brighter than when it operates on battery power. The brightness level is intended to save battery power.

Power Button Press the power button to turn the computer's

power on and off. There is one LED inside of power button. The power button will shinning blue when the system is accessed.

TOSHIBA Assist Button

You can associate an application to this button for automatic launch.

(This function is available depending on the model you purchased.)

TOSHIBA Presentation Button

This button allows the user to switch between the LCD and LCD/CRT (or projector).

(This function is available depending on the model you purchased.)

AccuPointII Pointing Device

Lets you to move the cursor and to select items on the screen.

(This function is available depending on the model you purchased.)

AccuPointII Control Button

The AccuPointII control button performs the same function as the left button on a mouse.

(This function is available depending on the model you purchased.)

TouchPad A pointer control device located in the center of the

palm rest is used to control the on-screen pointer.

TouchPad Control Buttons

Control buttons below the TouchPad let you select menu items or manipulate text and graphics designated by the on-screen pointer.

TECRA A3/S2 2-11

Keyboard Indicators

ARROW MODE NUMERIC MODE CAPS LOCK

Arrow Mode When the Arrow mode icon lights green, you can

The Grand Tour

use the keypad overlay (light gray labeled keys) as cursor keys. Refer to the Keypad Overlay section in Chapter 5, The Keyboard.

Numeric Mode You can use the keypad overlay (light gray labeled

Caps Lock The Caps Lock LED lights when you press the

keys) for numeric input when the Numeric mode icon lights green. Refer to the Keypad Overlay section in Chapter 5, The Keyboard.

Caps Lock key. When this light is on, pressing a letter key on the keyboard produces an uppercase (capital) letter.

Optical Media drive

One of the following optical media drives is installed in the computer: CD-RW/ DVD-ROM drive, DVD-ROM drive, DVD-R/-RW drive, DVD±R/±RW drive, DVD Super Multi drive. An ATAPI interface controller is used for CD/DVDROM operation. When the computer is accessing a CD/DVD, an indicator on the drive glows.

Region codes for DVD drives and media

CD-RW/DVD-ROM, DVD-ROM, DVD-R/-RW, DVD±R/±RW drive, DVD Super Multi drive and media are manufactured according to the specifications of six marketing regions. When you purchase DVD-Video, make sure it matches your drive, otherwise it will not play properly.

Code Region

1 Canada, United States

2 Japan, Europe, South Africa, Middle East

3 Southeast Asia, East Asia

4 Australia, New Zealand, Pacific Islands, Central

TECRA A3/S2 2-12

America, South America, Caribbean

5 Russia, Indian Subcontinent, Africa, North Korea,

Mongolia

6 China

Writable discs

This section describes the types of writable CD/DVD discs. Check the specifications for your drive to for the type of discs it can write. Use Record Now! to write compact discs. Refer to Chapter 4, Operating Basics.

CDs

■ CD-R discs can be written only once. The recorded data cannot be erased

or changed.

■ CD-RW discs can be recorded more than once. Use either 1, 2, or 4 multi

speed CD-RW discs or high-speed 4- to 10-speed discs. The write speed of the ultra-speed CD-RW discs (Ultra-speed is CD-RW/DVD-ROM drive only) is maximum 24-speed.

DVDs

■ DVD-R and DVD+R discs can be written only once. The recorded data

cannot be erased or changed.

■ DVD-RW, DVD+RW and DVD-RAM discs can be recorded more than

once.

The Grand Tour

Formats

The drives support the following formats:

■ DVD-ROM ■ DVD-Video

■ CD-DA ■ CD-Text

■ Photo CD™ (single/multi-session) ■ CD-ROM Mode 1, Mode 2

■ CD-ROM XA Mode 2 (Form1, Form2) ■ Enhanced CD (CD-EXTRA)

CD-RW/DVD-ROM drive

The full- size CD-RW/DVD-ROM drive module lets you record data to rewritable CD/ DVDs as well as run either 12 cm (4.72") or 8 cm (3.15") CD/ DVDs without using an adaptor.

The read speed is slower at the center of a disc and faster at the other edge.

DVD read 8 speed (maximum) CD read 24 speed (maximum) CD-R write 24 speed (maximum) CD-RW write 24 speed (maximum, ultra-speed media)

This drive can not use ultra-speed+ CD-RW media.

TECRA A3/S2 2-13

The Grand Tour

DVD-ROM drive

The full-size DVD-ROM drive module lets you run either 12 cm (4.72") or 8 cm (3.15") CD/DVDs without using an adaptor.

The read speed is slower at the center of a disc and faster at the other edge.

DVD read 8 speed (maximum) DVD read 24 speed (maximum)

DVD±R/±RW (DVD Dual) drive supporting Double Layer

The full- size DVD±R/±RW drive module lets you record data to rewritable CD/ DVDs as well as run either 12 cm (4.72") or 8 cm (3.15") CD/DVDs without using an adaptor.

The read speed is slower at the center of a disc and faster at the other edge.

DVD read 8 speed (maximum) DVD-R write 8 speed (maximum) DVD-RW write 4 speed (maximum) DVD+R write 8 speed (maximum) DVD+RW write 4 speed (maximum) CD read 24 speed (maximum) CD-R write 24 speed (maximum) DVD+R(DL) write 2.4 speed (maximum) CD-RW write 24 speed (maximum, ultra-speed media)

This drive can not use discs that allow writing faster than 8 speed (DVD-R, DVD+R with Single Layer), 4 speed (DVD-RW, DVD+RW), 2.4 speed (DVD+R with Double Layer), or ultra-speed+ (CD-RW).

TECRA A3/S2 2-14

DVD Super Multi drive supporting Double Layer

The full-siza DVD super multi drive module lets you record data to rewritable CD/DVDs as well as run either 12cm(4.72") or 8cm(3.15") CD/DVDs without using an adaptor.

The read speed is slower at the center of a disc and faster at the other edge.

DVD read 8 speed (maximum) DVD-R write 8 speed (maximum) DVD-RW write 4 speed (maximum) DVD+R write 8 speed (maximum) DVD+RW write 4 speed (maximum) DVD-RAM write 3 speed (maximum) CD read 24 speed (maximum) CD-R write 24 speed (maximum) CD-RW write 10 speed (maximum, ultra-speed media) DVD-R (DL) write 2.4 speed (maximum)

This drive can not use discs that allow writing faster than 8 speed(DVD-R, DVD+R with Single Layer), 4 speed(DVD-RW, DVD+RW), 3 speed(DVDRAM), 2.4 speed(DVD+R with Double Layer), or ultra-speed+(CD-RW).

DVD Super Multi drive

The full-siza DVD super multi drive module lets you record data to rewritable CD/DVDs as well as run either 12cm(4.72") or 8cm(3.15") CD/DVDs without using an adaptor.

The Grand Tour

The read speed is slower at the center of a disc and faster at the other edge.

This drive can not use discs that allow writing faster than 8 or more speed(DVD-R, DVD+R with Single Layer), 4 or more speed(DVD-RW, DVD+RW), 3 speed(DVD-RAM), or ultra-speed+(CD-RW).

TECRA A3/S2 2-15

AC adaptor

The AC adaptor converts AC power to DC power and reduces the voltage supplied to the computer. It can automatically adjust to any voltage from 100 to 240 volts and to a frequency of either 50 or 60 hertz, enabling you to use the computer in almost any country/region.

To recharge the battery, simply connect the AC adaptor to a power source and the computer. See Chapter 6, Power System, for details.

Use of the wrong adaptor could damage your computer. TOSHIBA assumes no liability for any damage in such case. The output rating for the computer is 15 volts DC.

The Grand Tour

The AC adaptor

Please use only the AC Adapter supplied with the computer or an AC adapter certified by TOSHIBA.

TECRA A3/S2 2-16

TECRA A3/S2

Getting Started

This chapter provides basic information to get you started using your computer. It covers the following topics:

■ Setting up your work space – for your health and safety

■ Connecting the AC adaptor

■ Opening the display

■ Turning on the power

■ Starting up for the first time

■ Turning off the power

■ Restarting the computer

■ Restoring the preinstalled software from the Product recovery disc.

All users should be sure to carefully read the section Starting up for the first time, which describe actions to take when you turn on the power for the first time.

Chapter 3

Setting up your work space

Establishing a comfortable work site is important for you and your computer. A poor work environment or stressful work habits can result in discomfort or serious injury from repetitive strain to your hands, wrists or other joints. Proper ambient conditions should also be maintained for the computer's operation. This section discusses the following topics:

■ General conditions

■ Placement of computer

■ Seating and posture

■ Lighting

■ Work habits

User’s Manual 3-1

General conditions

In general, if you are comfortable, so is your computer, but read the following to make sure your work site provides a proper environment.

■ TOSHIBA Power Saver make sure there is adequate space around the

computer for proper ventilation.

■ Make sure the AC power cord connects to an outlet that is close to the

computer and easily accessible.

■ The temperature should be 5 to 35 degrees Centigrade (41 to 95 degrees

Fahrenheit) and the relative humidity should be 20 to 80 percent.

■ Avoid areas where rapid or extreme changes in temperature or humidity

may occur.

■ Keep the computer free of dust, moisture, and exposure to direct sunlight.

■ Keep the computer away from heat sources, such as electric heaters.

■ Do not use the computer near liquids or corrosive chemicals.

■ Some components in the computer, including data storage media, can

be damaged by magnets. Do not place the computer near magnetic objects or bring magnetic objects close to the computer. Be careful of objects, such as stereo speakers, that produce strong magnetic fields during operation. Also, be careful with metal objects, such as bracelets, which can be inadvertently magnetized.

■ Do not operate the computer in close proximity to a mobile phone.

■ Leave ample ventilation room for the fan. Ensure that there are no

obstructions around any of the system inlets or exhaust vents.

Getting Started

Placement of computer

Position the computer and peripheral devices to provide comfort and safety.

■ Set the computer on a flat surface at a comfortable height and distance.

The display should be no higher than eye level to avoid eye strain.

■ Place the computer so that it is directly in front of you when you work and

make sure you have adequate space to easily operate other devices.

■ Allow adequate space behind the computer to let you freely adjust the

display. The display should be angled to reduce glare and maximize visibility.

■ If you use a paper holder, set it at about the same height and distance

as the computer.

TECRA A3/S2 3-2

Seating and posture

The height of your chair in relation to the computer and keyboard as well as the support it gives your body are primary factors in reducing work strain.

BELOW EYE

LEVEL

FOOT REST

Posture and positioning of the computer

■ Place your chair so that the keyboard is at or slightly below the level of

your elbow. You should be able to type comfortably with your shoulders relaxed.

■ Your knees should be slightly higher than your hips. If necessary, use a

foot rest to raise the level of your knees to ease pressure on the back of your thighs.

■ Adjust the back of your chair so it supports the lower curve of your spine.

■ Sit straight so that your knees, hips and elbows form approximately 90

degree angles when you work. Do not slump forward or lean back too far.

Getting Started

90°ANGLES

Lighting

Proper lighting can improve legibility of the display and reduce eye strain.

■ Position the computer so that sunlight or bright indoor lighting does not

reflect off the screen. Use tinted windows, shades or other screen to eliminate sun glare.

■ Avoid placing the computer in front of bright light that could shine directly

in your eyes.

■ If possible, use soft, indirect lighting in your computer work area. Use a

lamp to illuminate your documents or desk, but be sure to position the lamp so that it does not reflect off the display or shine in your eyes.

TECRA A3/S2 3-3

Work habits

A key to avoiding discomfort or injury from repetitive strain is to vary your activities.

If possible, schedule a variety of tasks into your work day. If you must spend long periods at the computer, finding ways to break up the routine can reduce stress and improve your efficiency.

■ Sit in a relaxed posture. Good positioning of your chair and equipment

as described earlier can reduce tension in your shoulders or neck and ease back strain.

■ Vary your posture frequently.

■ Occasionally stand up and stretch or exercise briefly.

■ Exercise and stretch your wrists and hands a number of times during the

day.

■ Frequently, look away from the computer and focus your eyes on a distant

object for several seconds, for example 30 seconds every 15 minutes.

■ Take frequent short breaks instead of one or two long breaks, for

example, two or three minutes every half hour.

■ Have your eyes examined regularly and visit a doctor promptly, if you

suspect you might be suffering from a repetitive strain injury.

■ Please check every couple of months to ensure the fan inlets or exhaust

vents are unobstructed. Clean them if necessary.

A number of books are available on ergonomics and repetitive strain injury or repetitive stress syndrome. For more information on these topics or for pointers on exercises for such stress points as hands and wrists, please check with your library or book vendor.

Getting Started

TECRA A3/S2 3-4

Connecting the AC adaptor

Attach the AC adaptor when you need to charge the battery or you want to operate from AC power. It is also the fastest way to get started, because the battery pack will need to be charged before you can operate from battery power. The AC adaptor can be connected to any power source supplying from 100 to 240 volts and 50 or 60 hertz. For details on using the AC adaptor to charge the battery pack, refer to Chapter 6, Power System.

Use of the wrong adaptor could damage your computer. TOSHIBA assumes no liability for any damage in such case. The output rating for the computer is 15 volts DC.

1. Connect the power cord to the AC adaptor.

Connecting the power cord to the AC adaptor

2. Connect the AC adaptor to the DC output plug to the DC IN input port on the back of the computer.

Getting Started

Connecting the adaptor to the computer

3. Plug the power cord into alive wall outlet. The Battery and DC IN indicators on the front of the computer should glow.

TECRA A3/S2 3-5

Opening the display

The display panel can be rotated in a wide range of angles for optimal viewing.

1. Slide the display latch on the front of the computer to the right to unlatch the display panel.

2. Lift the panel up and adjust it to the best viewing angle for you.

Use reasonable care when opening and closing the display panel. Opening it vigorously or slamming it shut could damage the computer.

Turning on the power

Getting Started

Opening the display

This section describes how to turn on the power.

After you turn on the power for the first time, do not turn it off until you have set up the operating system. Refer to the section Starting up for the first time in this chapter.

1. Make sure the diskette drive is empty. If a diskette is in the drive, press the eject button and remove the diskette.

2. Open the display panel.

3. Press the computer's power button and release.

TECRA A3/S2 3-6

Turning on the power

Starting up for the first time

Getting Started

When you first turn on the power, the computer's initial screen is the Microsoft

directions for each screen. During setup, you can click the Back button to return to the previous screen.

Be sure to read the Windows End User License Agreement display carefully.

Windows XP Startup Screen Logo. Follow the on-screen

Turning off the power

The power can be turned off in one of the following modes: Shut down (Boot), Hibernation or Standby mode.

Shut Down mode (Boot mode)

When you turn off the power in Shut Down mode no data is saved and the computer will boot to the operating system's main screen.

1. If you have entered data, save it to the hard disk or to a diskette.

2. Make sure all disk activity has stopped, then remove the CD/DVD-ROM or diskette.

TECRA A3/S2 3-7

Make sure the Built-in Hard Disk Drive and optical media drive are off. If you turn off the power while a disk is being accessed, you can lose data or damage the disk.

3. Click start and click Turn Off Computer. From the Turn Off Computer window click Tur n O f f .

4. Turn off the power to any peripheral devices.

Do not turn the computer or devices back on immediately. Wait a moment to let all capacitors fully discharge.

Hibernation mode

The hibernation feature saves the contents of memory to the hard disk when the computer is turned off. The next time the computer is turned on, the previous state is restored. The hibernation feature does not save the status of peripheral devices.

1. While entering Hibernation mode, the computer saves the contents of memory to the hard disk drive. Data will be lost if you remove the battery or disconnect the AC adaptor before the save is completed. Wait for the Built-in Hard Disk Drive indicator to go out.

2. Do not install or remove a memory module while the computer is in hibernation mode. Data will be lost.

Benefits of Hibernation

The hibernation feature provides the following benefits:

■ Saves data to the hard disk when the computer automatically shuts down

because of a low battery.

Getting Started

For the computer to shut down in Hibernation mode, the Hibernation feature must be enabled in two places: the Hibernate tab in Power Options and Setup Action in TOSHIBA Power Saver.

Otherwise, the computer will shut down in Standby mode. If battery power becomes depleted, data saved in Standby will be lost.

■ You can return to your previous working environment immediately when

you turn on the computer.

■ Saves power by shutting down the system when the computer receives

no input or hardware access for the duration set by the System Hibernate feature.

■ You can use the panel power off feature.

TECRA A3/S2 3-8

Getting Started

Starting Hibernation

You can also enable Hibernation by pressing Fn + F4. See Chapter 5, The Keyboard, for details.

To enter Hibernation mode, follow the steps below.

1. Click Start.

2. Select Turn Off Computer.

3. Open the Turn Off Computer dialog box. Hibernate is not displayed.

4. Press the Shift key. The Standby item will change to Hibernate.

5. Select Hibernate.

Automatic Hibernation

The computer will enter Hibernate mode automatically when you press the power button or close the lid. First, however, make the appropriate settings according to the steps below.

1. Open the Control Panel.

2. Open Performance and Maintenance and open Power Options.

3. Select the Hibernation tab.

4. Select Enable Hibernate, then click OK button.

5. Open Toshiba Power Saver.

6. Select Setup Action tab.

7. Enable the desired Hibernation settings for When I press the power button and When I close the lid of my portable computer.

8. Click the OK button.

Data save in Hibernation mode

When you turn off the power in hibernation mode, the computer takes a moment to save current memory data to the hard disk. During this time, the Built-in Hard Disk Drive indicator will light.

After you turn off the computer and memory is saved to the hard disk, turn off the power to any peripheral devices.

Do not turn the computer or devices back on immediately. Wait a moment to let all capacitors fully discharge.

TECRA A3/S2 3-9

Standby mode

In standby mode the power remains on, but the CPU and all other devices are in sleep mode.

■ If the computer is not used or accessed in any way, including receipt of

e-mail, for 15 or 30 minutes when the AC adaptor is connected, the computer will automatically enter Standby mode (TOSHIBA Power Saver default).

■ To restore operation, press the power button.

■ If the computer automatically enters Standby mode while a network

application is active, the application might not be restored when the computer wakes up from Standby.

■ To prevent the computer from automatically entering Standby mode,

disable Standby in TOSHIBA Power Saver. That action, however, will nullify the computer's Energy Star compliance.

Standby precautions

■ Before entering Standby mode, be sure to save your data.

■ Do not remove/install memory or remove power components:

■ Do not remove/install the memory module. The computer or the

module could be damaged.

■ Do not remove the Battery Pack.

In any of the above cases, the standby configuration will not be saved.

■ If you carry the computer on board an aircraft or into a hospital, be sure

to shut down the computer in hibernation mode or in shutdown mode to avoid radio signal interference.

Getting Started

Benefits of Standby

The standby feature provides the following benefits:

■ Restores the previous working environment more rapidly than does

Hibernation.

■ Saves power by shutting down the system when the computer receives

no input or hardware access for the duration set by the System Standby feature.

■ You can use the panel power off feature.

TECRA A3/S2 3-10

Getting Started

Executing Standby

You can also enable Standby by pressing Fn + F3. See Chapter 5, The Keyboard, for details.

You can enter standby mode in one of three ways:

1. Click start, click Turn Off Computer and click Stand by.

2. Close the display panel. This feature must be enabled. Refer to the Setup Action tab in TOSHIBA Power Saver Utility described in the Control Panel.

Open Performance and Maintenance and open TOSHIBA Power Saver.

3. Press the power button. This feature must be enabled. Refer to the Setup Action tab in TOSHIBA Power Saver Utility described in the Control Panel.

When you turn the power back on, you can continue where you left when you shut down the computer.

■ When the computer is shut down in Standby mode, the power indicator

glows amber.

■ If you are operating the computer on battery power, you can lengthen

the operating time by shutting down in hibernation mode. Standby mode consumes more power.

Standby limitations

Standby will not function under the following conditions:

■ Power is turned back on immediately after shutting down.

■ Memory circuits are exposed to static electricity or electrical noise.

Restarting the computer

Certain conditions require that you restart the computer system. For example, if:

■ You change certain computer settings.

■ An error occurs and the computer does not respond to your keyboard

commands.

There are three ways to reset the computer system:

1. Select Restart from the Turn Off Computer window in the start box.

2. If the computer is already on, press Ctrl + Alt + Del.

3. Press the power button to turn the computer off, then press it a second to time in order to restart.

Only use step 3 if the operating system freezes or locks up due to a crash. Performing step 3 should only ever be a last resort as you will lose all unsaved data and could potentially damage critical files.

TECRA A3/S2 3-11

Restoring the preinstalled software

Some models in this series are prepared for Hard Disk Recovery. These models will come without a Product Recovery optical media and a Tools & Utilities CD-ROM. You can restore the preinstalled software depending on the model you purchased.

Restoring from the Product Recovery Media

For models only with bundled Product Recovery optical media.

Restoring the complete system

To restore the operating system and all preinstalled software, follow the steps below.

When you reinstall the Windows operating system, the hard disk will be reformatted and all data will be lost. Make sure you have a backup copy of

your data, before you perform a complete system recovery.

1. Load the Product Recovery disk in the optical media drive and turn off the computer’s power.

2. Hold down the F12 key and turn on the power. When In Touch with Tomorrow TOSHIBA appears, release the F12 key.

3. Use cursor keys to select the CD-ROM/DVD-ROM icon in the display menu. For details, refer to the Boot Priority section in Chapter 7, HW Setup.

4. Follow the on-screen instructions.

5. If your computer came with additonal software installed, this software can not be recovered from the Product Recovery disk. Re-install these applications (e.g. Works Suite, DVD Player, Games, etc.) separately from other media.

Getting Started

Restoring TOSHIBA utilities and drivers

If Windows is working properly, individual drivers or applications can be separately restored. The TOSHIBA Tools & Utilities folder (C:\TOOLSCD) contains drivers and applications, which are included with your computer system. If your system drivers or applications have become damaged in some way, you can reinstall most of the components from this folder. Create a copy of this folder to an external media for more convenience.

TECRA A3/S2 3-12

Restoring from Recovery HDD

For models only with HDD Recovery installed.

If preinstalled files are damaged, use the HDD Recovery installation to restore them.

When you reinstall the Windows operating system, the hard disk will be reformatted and all data will be lost.Make sure you have a backup copy of

your data, before you perform a complete system recovery.

Create Optical Recovery Discs

A recovery image of your computer is stored on the hard disk. You may use this image to create CD or DVD recovery discs using the following steps:

1. Select either blank CDs or DVD media.

2. The application will allow you to choose a type of media to create recovery CDs/DVD including: CD-R, CD-RW, DVD-R, DVD-RW, DVD+R, and DVD+RW.

Some media may not be compatible with the Optical Drive of your computer. Please verify your Optical Drive supports the blank media you choose.

3. Turn on your computer to open Windows XP.

4. Insert the (first) blank media into the tray of the Optical Drive.

5. Double click the Recovery Disc Creator Launcher icon on the Windows XP desktop, or select the application from start Menu.

6. After Recovery Disc Creator starts, select the type of media and the title you wish to copy to the media then click the Burn button.

Getting Started

If your Optical Drive can only write to CDs, select "CD" as the "Type" on Recovery Disc Creator. If your Optical Drive of your computer can write to either CD or DVDs, select the one you are using as the "Type" on Recovery Disc Creator.

Restoring the preinstalled software from the Recovery HDD

About 2.5 GB of hard disk space is reserved for recovery partition. When re-setting up your hard disk, do not change, delete or add partitions

in a manner other than specified in the manual. Otherwise, space for software may be destroyed.

In addition, if you use a third-party partitioning program to reconfigure partitions on your hard disk, it may become impossible to re-setup your computer.

1. Turn off your computer.

2. While holding down 0 (zero) key on the keyboard, turn on your computer.

TECRA A3/S2 3-13

Getting Started

3. A menu appears. Press the "1" key on the keyboard to restore the original configuration as purchased. Press the "2" key to keep your current partitions intact and restore. Press the "3" key to specify partitions and restore.

4. Follow the on-screen instructions.

Restoring from your created Recovery Media

If preinstalled files are damaged, use the your created Recovery Media to restore them. To restore the operating system and all preinstalled software, follow the steps below.

When you reinstall the Windows operating system, the hard disk will be reformatted and all data will be lost.

1. Load the Recovery Media in the optional optical media drive and turn off the computer's power.

2. Hold down the F12 key and turn on the power. When In Touch with Tomorrow TOSHIBA appears, release the F12 key.

3. Use the cursor key to select the CD-ROM/DVD-ROM icon in the display menu. For details, refer to the Boot Priority section in Chapter 7, HW

Setup.

4. A menu appears. Press the "1" key on the keyboard to restore all hard disk. Press the "2" key to restore drive C:. Press the "3" key to restore Recovery tool.

5. Follow the on-screen instructions.

TECRA A3/S2 3-14

TECRA A3/S2

Operating Basics

This chapter gives information on using the TouchPad, internal modem, LAN, wireless LAN, optical media drives, and TV-Out function. It also provides tips on caring for your computer and on heat dispersal.

Using the TouchPad

To use the TouchPad, simply move your finger tip across it in the direction you want the on-screen pointer to go.

Chapter 4

1. TOUCH PAD CONTROL BUTTONS

2. TOUCH PAD

TouchPad and control buttons

Two control buttons below the keyboard are used like the buttons on a mouse pointer. Press the left button to select a menu item or to manipulate text or graphics designated by the pointer. Press the right button to display a menu or other function depending on the software you are using.

Do not press on the TouchPad too hard or press a sharp object such as a ball point pen against the TouchPad. The TouchPad could be damaged.

User’s Manual 4-1

The TouchPad has similar functions to a two-button mouse with a scroll wheel. For some functions, you can tap the TouchPad instead of pressing a control button.

You can customize pointing device actions in Mouse Properties. Open the Control Panel, select the Mouse icon and press Enter to open the Mouse Properties window.

Click Click the left control button or tap the TouchPad one time. Double-click Click the left control button twice or tap the TouchPad

twice.

Scroll Vertical: Move your finger up or down the right edge of the

TouchPad. Horizontal: Move your finger left or right along the bottom

edge of the TouchPad.

TOSHIBA Dual Pointing Device

Depending on the model you purchased, the computer is equipped with a dual point system: a TouchPad and an AccuPointII pointing stick.

Using the TouchPad

To use the TouchPad, simply touch and move your fingertip across it in the direction you want the on-screen pointer to go.

Operating Basics

3 2

1. TOUCHPAD CONTROL BUTTONS

2. TOUCHPAD

3. ACCUPOINTII CONTROL BUTTON *

4. A

CCUPOINTII CONTROL BUTTON *

5. A

CCUPOINTII POINTING DEVICE *

* available depending on the model you purchased

TouchPad and control buttons

TECRA A3/S2 4-2

Two buttons below the TouchPad are used like the buttons on a mouse pointer. Press the left button to select a menu item or to manipulate text or graphics designated by the pointer. Press the right button to display a menu or other function depending on the software you are using.

You can also tap the TouchPad to perform functions similar to those of the left button.

Click Tap once Double-click Tap twice Drag and drop Tap to select the material you want to move. Leave your

finger on the TouchPad after the second tap and move the material.

Using the AccuPointII Pointing device

To use the AccuPointII Pointing device, simply push it with your finger tip in the direction you want to move the on-screen pointer.

Two buttons above the TouchPad work in the same way with the AccuPointII pointing device as they do with the TouchPad.

AccuPointII Pointing device precautions

Certain conditions can affect the on-screen pointer when using AccuPointII Pointing device. For example, the pointer may travel contrary to AccuPoint operation or an error message may appear, if

■ You touch the AccuPoint during power-up.

■ You apply constant, soft pressure during power-up.

■ There is a sudden temperature change.

■ Strong stress is applied to the AccuPoint.

If an error message apears, reboot the computer. If an error message does not appear, wait a moment for the pointer to stop, then continue operation.

Operating Basics

TECRA A3/S2 4-3

Replacing the cap

The AccuPointII cap is an expendable item that should be replaced after prolonged use. A AccuPoint cap is supplied with the computer, depend on the model you purchased.

1. To remove the AccuPoint cap, firmly pinch the cap and pull it straight up.

2. Position a new cap on the peg and press it into place.

The peg is square, so be careful to align the cap's square hole with the peg.

Operating Basics

Using the internal modem

This section describes how to make settings and connect the modem. Refer to the computer's online help files for more information. Refer also to the online help files for your modem software.

The internal modem does not support the voice functions described in the help files. All data and fax functions are supported.

■ In case of a lightning storm, unplug the modem cable from the telephone

jack.

■ Do not connect the modem to a digital telephone line. A digital line will

damage the modem.

TECRA A3/S2 4-4

IMPORTANT SAFETY INSTRUCTIONS

When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following:

1. Do not use this product near water, for example, near a bathtub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool.

2. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning.

3. Do not use the telephone to report a gas leak in the vicinity of the leak.

4. Use only the power cord indicated in this manual.

Region selection

Telecommunication regulations vary from one country/region to another, so you will need to make sure the internal modem's settings are correct for the country/region in which it will be used.

1. Point to "All Programs", point to "TOSHIBA", point to "Networking" and click "Modem Region Select".

Do not use the Country/Region Select function in the Modem setup utility in the Control Panel if the function is available. If you change the Country/ Region in the Control Panel, the change may not take effect.

2. The Region Selection icon will appear in the Windows Task Bar.

Operating Basics

The Region Selection icon

3. Click the icon with the primary mouse button to display a list of regions that the modem supports. A sub menu for telephony location information will also be displayed. A check will appear next to the currently selected region and telephony location.

4. Select a region from the region menu or a telephony location from the submenu.

■ When you click a region it becomes the modem's region selection,

and the New Location for telephony will be set automatically.

■ When you select a telephony location, the corresponding region is

automatically selected and it becomes the modem's current region setting.

Properties menu

Click the icon with the secondary mouse button to display the following menu.

TECRA A3/S2 4-5

The properties menu

Setting

You can enable or disable the following settings:

AutoRun Mode

Region Select Utility starts automatically when you start up the operating system.

Open the Dialing Properties dialog box after selecting region.

The dialing properties dialog box will be displayed automatically after you select the region.

Location list for region selection.

A submenu appears displaying location information for telephony.

Operating Basics

Open dialog box, if the modem and Telephony Current Location region code do not match.

A warning dialog box is displayed if current settings for region code and telephony location are incorrect.

Modem Selection

If the computer cannot recognize the internal modem, a dialog box is displayed. Select the COM port for your modem to use.Dialing Properties

Select this item to display the dialing properties.

If you are using the computer in Japan, technical regulations described in the Telecommunications Business Law require that you select Japan region mode. It is illegal to use the modem in Japan with any other selection.

Connecting

To connect the internal modem cable, follow the steps below.

TECRA A3/S2 4-6

Operating Basics

■ In case of a lightning storm, unplug the modem cable from the telephone

jack.

■ Do not connect the modem to a digital telephone line. A digital line will

damage the modem.

1. Plug one end of the modular cable into the modem jack.

2. Plug the other end of the modular cable into a telephone jack

Connecting the internal modem

Do not pull on the cable or move the computer while the cable is connected.

If you use a storage device such as a DVD-ROM drive or HDD connected to a 16-bit PC card, modem speed might be slow or communication might be interrupted.

If modem speed is low or communication is interrupted when you are using modem, please check and set CPU speed to Maximum by TOSHIBA Power Saver utility.

Disconnecting

To disconnect the internal modem cable, follow the steps below.

1. Pinch the lever on the connector in the telephone jack and pull out the connector.

2. Disconnect the cable from the computer in the same manner.

TECRA A3/S2 4-7

LAN

The computer is equipped with LAN circuits that support Ethernet LAN (10 megabits per second, 10BASE-T), Fast Ethernet LAN (100 megabits per second, 100BASE-TX), or Gigabit Ethernet LAN (1000 megabits per second, 1000BASE-T). This section describes how to connect/disconnect to a LAN.

Do not install or remove an optional memory module while Wake-up on LAN is enabled.

Wake-up on LAN does not work without the AC adaptor. Leave it connected, if you are using this feature.

Connecting LAN cable

The computer must be configured properly before connecting to a LAN. Logging onto a LAN using the computer's default settings could cause a malfunction in LAN operation. Check with your LAN administrator regarding set-up procedures.

If you are using 100BASE-TX Fast Ethernet, be sure to connect with CAT5 cable.

If you are using 1000BASE-T Fast Ethernet, be sure to connect with CAT5e or CAT6 cable.

To connect the LAN cable, follow the steps below.

1. Turn off the power to the computer and to all external devices connected to the computer.

2. Plug one end of the cable into the LAN jack. Press gently until you hear the latch click into place.

Operating Basics

Connecting the LAN cable

3. Plug the other end of the cable into a LAN hub connector. Check with your LAN administrator before connecting to a hub.

TECRA A3/S2 4-8

Disconnecting LAN cable

To disconnect the LAN cable, follow the steps below.

1. Pinch the lever on the connector in the computer's LAN jack and pull out the connector.

2. Disconnect the cable from the LAN hub in the same manner. Check with your LAN administrator before disconnecting from the hub.

Wireless LAN

The wireless LAN is compatible with other LAN systems that comply with the IEEE 802.11a+g and 802.11g wireless LAN standards.

It supports the following:

■ Automatic Transmit Rate Select mechanism in the transmit range of 54,

11, 5.5, 2 and 1 Mbit/s. Advanced Encryption Standard (AES) data encryption, based on 128bit encryption algorithm. (Revision G, A/G combo type.)

Wake-up on LAN does not function on a Wireless LAN.

■ Frequency Channel Selection (5GHz and 2.4 GHz)

■ Roaming over multiple channels

■ Card Power Management

■ Wired Equivalent Privacy (WEP) data encryption. Wake-up on LAN does

not function on a wireless LAN.

Operating Basics

Wireless LAN disclaimer

The transmission speed over the wireless LAN and the distance over which wireless LAN can reach may vary depending on surrounding electromagnetic environment, obstacles, access point design and configuration, and client design and software/hardware configurations. The actual transmission speed will be lower than the theoretical maximum speed.

To use the Atheros SuperAG point must support the corresponding feature. Performance of these functions may vary depending on the format of data transmitted.

or SuperGTM function, your client and access

Security

1. Be sure to enable WEP(encryption) function. Otherwise you computer will allow the illegal access by outside through Wireless LAN to cause illegal intrusion, eavesdropping, and loss or destruction of stored data. TOSHIBA strongly recommend the customer to enable the WEP function.

2. TOSHIBA is not liable for the eavesdropping of data due to the use of Wireless LAN and the damage thereof.

TECRA A3/S2 4-9

Wireless communication switch

You can enable or disable wireless LAN function, with the on/off switch. No transmissions are sent or received when the switch is off. Slide the switch forward to turn it on and backward to turn it off.

Turn the switch off in airplanes and hospitals. Check the LED. It stops glowing when the wireless communication function is off.

Wireless communication LED

The LED indicates the status of the wireless communication functions.

LED status Indication

LED off Wireless communication switch is set to off

LED glows Wireless communication switch is on

Changing Slim Select Bay modules

The Slim Select Bay is available depening on the model you purchased.

This section explains how to change modules in the Slim Select Bay. The illustrations below show replacement of the DVD-ROM drive with the Slim Select Bay HDD adaptor. Therefore, the text refers to those modules. However, the procedures are the same for any of the modules: CD-ROM drive, DVD-ROM drive, DVD-ROM&CD-R/RW drive, DVD±R/±RW drive, DVD Super Multi drive, HDD adaptor, or weight saver.

Operating Basics

To avoid injury, do not put your hand into the Slim Select Bay slot.

The TOSHIBA Bay Service is preinstalled to support hot swapping under Windows.

Removing a module

Remove the DVD-ROM drive as described below.

1. You can confirm that the disks are not operating with indicators. If all indicators are off, it means that no disks are operating currently.

2. Turn the computer upside down.

Wait for all disk indicators to go out before you turn over the computer and do not lay the computer down gently. Shock can damage the Hard disk drive or other components.

3. Remove the lock screw near the icon securing the Slim Select Bay.

4. Make sure the screw in the Slim Select Bay lock is set in the hole for the unlock position.

TECRA A3/S2 4-10

5. Slide the Slim Select Bay latch to the unlock position.

6. Grasp the DVD-ROM drive and slide it out.

The DVD-ROM drive and other Slim Select Bay modules can become hot with use. Be careful when removing the module.

LOCK SCREW

SLIM SELECT BAY

LATCH

DVD-ROMDRIVE

Removing the DVD-ROM drive

Inserting a module

Insert the Slim Select Bay Hard disk drive adaptor as described below.

1. Insert the Slim Select Bay Hard disk drive adaptor in the computer as shown below and press until the ejector clicks.

2. If you want to lock the Slim Select Bay Hard disk drive adaptor, set the Slim Select bay lock screw in the hole for the lock position screw is inserted in the unlock position

at the time of purchasing.

➀

Operating Basics

. The lock

➁

LOCK SCREW

DVD-ROM DRIVE

Inserting the Slim Select Bay HDD adaptor

TECRA A3/S2 4-11

Using optical media drives

The illustrations in this section might differ slightly from your drive, but operation is the same for all optical media drives. The full-size drive provides high-performance execution of CD/DVD-ROM-based programs. You can run either 12 cm (4.72") or 8 cm (3.15") CD/DVDs without an adaptor. An ATAPI interface controller is used for CD/DVD-ROM operation. When the computer is accessing a CD/DVD, an indicator on the drive glows.

Use the WinDVD 5 application to view DVD-Video discs.

If you have a CD-RW/DVD-ROM drive, refer also to the Writing CDs on CD-RW/DVD-ROM drive section for precautions on writing to CDs.

If you have a DVD±R/±RW drive, refer also to the Writing CD/DVDs on DVD±R/±RW drive section for precautions on writing to CDs.

If you have a DVD Super Multi drive, refer also to the Writing CD/DVDs on DVD Super Multi drive section for precautions on writing to CDs.

If you have a DVD-ROM drive, you only can read DVD and CD from your driver but no write capability to writable DVD or CD format.

Operating Basics

TECRA A3/S2 4-12

Loading compact discs

To load a DVD/CD, follow the steps below.

1. Turn on the power.

2. a. Press the eject button to open the drawer slightly.

Pressing the eject button

b. Pressing the eject button will not open the drawer when the

computer's power is off. If the power is off, you can open the drawer by inserting a slender object (about 15 mm) such as a straightened paper clip into the eject hole just to the right of the eject button.

Operating Basics

EJECT BUTTON

Manual release with the eject hole

3. Grasp the drawer gently and pull until it is fully opened.

Pulling the drawer open

TECRA A3/S2 4-13

Operating Basics

4. Lay the DVD/CD, label side up, in the drawer.

Inserting a DVD/CD

Be careful not to touch the lens or the area around it. Doing so could cause the drive to malfunction.

5. Press gently at the center of the DVD/CD until you feel it click into place. The DVD/CD should lie below the top of the spindle, flush with its base.

6. Push the center of the drawer to close it. Press gently until it locks in place.

If the DVD/CD is not seated properly when the drawer is closed, it might be damaged. Also, the drawer might not open fully when you press the eject button.

Closing the DVD-ROM drawer

TECRA A3/S2 4-14

Removing compact discs

To remove the DVD/CD, follow the steps below.

Do not press the eject button while the computer is accessing the DVD drive. Wait for the Diskette/Optical Media indicator to go out before you open the drawer. Also, if the disc is spinning when you open it, wait for it to stop before you remove it.

1. To pop the drawer partially open, press the eject button. Gently pull the drawer out until it is fully opened.

■ When the drawer pops open slightly, wait a moment to make sure the

DVD/CD has stopped spinning before pulling the drawer fully open.

■ Turn off the power before you use the eject hole. If the DVD/CD is

spinning when you open the drawer, it could fly off the spindlend cause injury.

2. The DVD/CD extends slightly over the sides of the drawer so you can grasp it. Hold the it gently and lift it out.

Operating Basics

Removing a DVD/CD

3. Push the center of the drawer to close it. Press gently until it locks into place.

TECRA A3/S2 4-15

Writing CDs on a CD-RW/DVD-ROM drive

You can use the CD-RW/DVD-ROM drive to write data to CD-R/RW discs. The following applications for writing are preinstalled: Record Now!/DLA, licensed by Sonic Solutions.

Important message

Before you write or rewrite to CD-R/RW disc, read and follow all setup and operating instructions in this section. If you fail to do so, the CD-RW/DVDROM drive may not function properly, and you may fail to write or rewrite, lose data or incur other damage.

Disclaimer

TOSHIBA does not bear responsibility for the following:

■ Damage to any CD-R/RW disc that may be caused by writing or rewriting

with this product.

■ Any change or loss of the recorded contents of CD-R/RW disc that may

be caused by writing or rewriting with this product, or for any business profit loss or business interruption that may be caused by the change or loss of the recorded contents.

■ Damage that may be caused by using third party equipment or software.

Given the technological limitations of current optical disc writing drives, you may experience unexpected writing or rewriting errors due to disc quality or problems with hardware devices. Also, it is a good idea to make two or more copies of important data, in case of undesired change or loss of the recorded contents.

Operating Basics

CD-R discs can be written to only once. CD-RW discs can be rewritten many times.

Before writing or rewriting

Please observe the following points when you write or rewrite the data.

■ We recommend the following manufacturers of CD-R and CD-RW media.

Media quality can affect write or rewrite success rates.

CD-R: TAIYOYUDEN CO., LTD.

CD-RW: MITSUBISHI CHEMICAL CORPORATION

TECRA A3/S2 4-16

MITSUBISHI CHEMICAL CORPORATION RICOH Co., Ltd. Hitachi Maxell Ltd.

RICOH Co., Ltd.

TOSHIBA has confirmed the operation of CD-R and CD-RW media of the manufacturers above. Operation of other media cannot be guaranteed.

■ CD-RW can generally be rewritten about 1,000 times. However, the

actual number of rewrites is affected by the quality of the media and the way it is used.

■ Be sure to connect the universal AC adaptor when you write or rewrite.

■ Be sure to close all other software programs except the writing software.

■ Do not run software such as a screen saver which can put a heavy load

on the CPU.

■ Operate the computer at full power. Do not use power-saving features.

■ Do not write while virus check software is running. Wait for it to finish,

then disable virus detection programs including any software that checks files automatically in the background.

■ Do not use hard disk utilities, including those intended to enhance HDD

access speed. They may cause unstable operation and damage data.

■ Write from the computer's HDD to the CD. Do not try to write from shared

devices such as a LAN server or any other network device.

■ Writing with software other than Sonic RecordNow! has not been

confirmed. Therefore, operation with other software cannot be guaranteed."

When writing or rewriting

Note the following when you write or rewrite a CD-R or CD-RW.

■ Always copy data from the Hard disk drive to the CD. Do not use cut-and-

paste. The original data will be lost if there is a write error.

■ Do not perform any of the following actions:

■ Change users in the Windows XP operating system.

■ Operate the computer for any other function, including use of a mouse

or TouchPad, closing/opening the LCD panel.

■ Start a communication application, such as a modem.

■ Apply impact or vibration to the PC.

■ Install, remove or connect external drives, including the following: PC

card, USB devices, external display, i.LINK devices, optical digital devices.

■ Open the optical media drive.

■ Remove the optical media drive from the Slim Select Bay (TECRA

S2 series only).

■ If the media is poor in quality, dirty or damaged, writing or rewriting errors

may occur.

■ Set the computer on a level surface and avoid places subject to vibration,

such as airplanes, trains, or cars. Do not use an unstable surface, such as a stand.

■ Keep mobile phones and other wireless communication devices away

from the computer.

Operating Basics

TECRA A3/S2 4-17

Writing CD/DVDs on a DVD±R/±RW drive supporting Double Layer

You can use the DVD±R/±RW drive to write data to either CD-R/RW or DVDR/-RW/+R/+RW discs. The following applications for writing are preinstalled: Record Now!/DLA, licensed by Sonic Solutions. InterVideo WinDVD Creator 2 Platinum, which is a product of InterVideo, Inc.

Important message Before you write or rewrite to CD-R/RW or DVD-R/-RW/+R/+RW disc, read

and follow all setup and operating instructions in this section. If you fail to do so, the DVD±R/±RW drive may not function properly, and you may fail to write or rewrite, lose data or incur other damage.

Disclaimer

TOSHIBA does not bear responsibility for the following:

■ Damage to any CD-R/RW or DVD-R/-RW/+R/+RW disc that may be

caused by writing or rewriting with this product.

■ Any change or loss of the recorded contents of CD-R/RW or DVD-R/-

RW/ +R/+RW disc that may be caused by writing or rewriting with thisproduct, or for any business profit loss or business interruption that may be caused by the change or loss of the recorded contents.

■ Damage that may be caused by using third party equipment or software.

Operating Basics

Before writing or rewriting

Please observe the following points when you write or rewrite data.

■ Based on TOSHIBA's limited compatibility testing, we suggest the

following manufacturers of CD-R/RW or DVD-R/-RW/+R/+RW disc. However, in no event does TOSHIBA guarantee the operation, quality or performance of any disc. Disc quality can affect write or rewrite success rates.

CD-R: TAIYOYUDEN CO., LTD.

CD-RW: MITSUBISHI CHEMICAL CORPORATION

TECRA A3/S2 4-18

MITSUBISHI CHEMICAL CORPORATION RICOH Co., Ltd. Hitachi Maxell Ltd.

RICOH Co., Ltd.

Operating Basics

DVD-R: DVD Specifications for Recordable Disc for

General Version 2.0

TAIYOYUDEN CO., LTD. PIONEER VIDEO CORPORATION MITSUBISHI CHEMICAL CORPORATION

DVD-RW: DVD Specifications for Re-recordable Disc for

Version 1.0 or Version 1.1, Version 1.2

VICTOR COMPANY OF JAPAN, LIMITED TDK Corporation

DVD+R: MITSUBISHI CHEMICAL CORPORATION

RICOH Co., Ltd.

DVD+RW: MITSUBISHI CHEMICAL CORPORATION

RICOH Co., Ltd.

DVD+R

MITSUBISHI CHEMICAL CORPORATION

(Double Layer)

■ If the disc is poor in quality, dirty or damaged, writing or rewriting errors

may occur. Be careful to check the disc for dirt or damage before you use it.

■ The actual number of rewrites to CD-RW or DVD-RW/+RW is affected

by the quality of the disc and the way it is used.

■ There are two types of DVD-R: authoring and general use discs. Do not

use authoring discs. Only general use discs can be written to by a computer drive.

■ Other DVD-ROM drives for computers or other DVD players may not be

able to read DVD-R/+R/-RW/+RW discs.

■ Data written to a CD-R/DVD-R/+R disc cannot be deleted either in whole

or in part.

■ Data deleted (erased) from a CD-RW and DVD-RW/+RW disc cannot be

recovered. Check the content of the disc carefully before you delete it. If multiple drives that can write data to discs are connected, be careful not to delete data from the wrong drive.

■ In writing to a DVD-R/+R/-RW/+RW disc, some disc space is required for

file management, so you may not be able to write the full capacity of the disc.

■ Since the disc is based on the DVD-R/-RW standard, it will be filled with

dummy data if the written data is less than about 1 GB. Even if you write only a small amount of data, it might take time to fill in the dummy data.

■ Two types of DVD-R/+R/-RW/+RW discs are on the market: data and

video. Use a video disc to store video data. You can use video discs on a DVD recorder as well as on your computer's DVD-ROM drive. You cannot use data discs on a DVD recorder..

■ When multiple drives that can write data to discs are connected, be

careful not to write to the wrong drive.

■ Be sure to connect the universal AC adaptor before you write or rewrite.

TECRA A3/S2 4-19

■ Be sure to close all other software programs except the writing software.

■ Do not run software such as a screen saver, which can put a heavy load

on the CPU.

■ Operate the computer in the full-power mode. Do not use power-saving

features.

■ Do not write while virus check software is running. Wait for it to finish,

then disable virus detection programs including any software that checks files automatically in the background.

■ Do not use hard disk utilities, including those intended to enhance HDD

access speed. They may cause unstable operation and data damage.

■ Write from the computer's HDD to the CD/DVD. Do not try to write from

shared devices such as a LAN server or any other network device.

■ Writing with software other than Sonic RecordNow! has not been

confirmed. Therefore, operation with other software cannot be guaranteed.

When writing or rewriting

Please observe/consider the following when you write or rewrite to a CD-R/ RW, DVD-R/-RW or DVD+R/+RW disc.

■ Do not perform any of the following actions:

■ Change users in the Windows XP operating system.

■ Operate the computer for any other function, including use of a mouse

or TouchPad, closing/opening the LCD panel.

■ Start a communication application, such as a modem.

■ Apply impact or vibration to the PC.

■ Install, remove or connect external drives, including the following: PC

card, USB devices, external display, i.LINK devices, optical digital devices.

■ Use the Audio/Video control button to reproduce music or voice.

■ Open the CD-RW, DVD-ROM, DVD-R/-RW,or DVD+-R/+-RW drive.

■ Remove the optical media drive from the Slim Select Bay (TECRA

S2 series only).

■ Make sure writing or rewriting is completed before going into standby/

hibernation. Writiing is completed if you can open the CD-RW, DVD-ROM, DVD-R/-RW,or DVD+-R/+-RW drive tray.

■ Set the computer on a level surface and avoid places subject to vibration,

such as airplanes, trains, or cars. Do not use an unstable surface, such as a stand.

■ Keep mobile phones and other wireless communication devices away

from the computer.

Operating Basics

TECRA A3/S2 4-20

Operating Basics

Writing CD/DVDs on a DVD Super Multi drive and a DVD Super Multi drive supporting Double Layer

You can use the DVD Super Multi drive to write data to either CD-R/RW or DVD-R/-RW/+R/+RW/-RAM discs. The following applications for writing are preinstalled: Record Now!/DLA, licensed by Sonic Solutions. InterVideo WinDVD Creator 2 Platinum, which is a product of InterVideo, Inc.

Important message

Before you write or rewrite to CD-R/RW or DVD-R/-RW/+R/+RW/-RAM disc, read and follow all set-up and operating instructions in this section. If you fail to do so, the DVD Super Multi drive may not function properly, and you may fail to write or rewrite, lose data or incur other damage.

Disclaimer

TOSHIBA does not bear responsibility for the following:

■ Damage to any CD-R/RW or DVD-R/-RW/+R/+RW/-RAM disc that may

be caused by writing or rewriting with this product.

■ Any change or loss of the recorded contents of CD-R/RW or DVD-R/-

RW/ +R/+RW /-RAM disc that may be caused by writing or rewriting with this product, or for any business profit loss or business interruption that may be caused by the change or loss of the recorded contents.

■ Damage that may be caused by using third party equipment or software.

Before writing or rewriting

Please observe the following points when you write or rewrite data.

■ Based on TOSHIBA's limited compatibility testing, we suggest the

following manufacturers of CD-R/RW and DVD-R/+R/-RW/+RW/-RAM disc. However, in no event does TOSHIBA guarantee the operation, quality or performance of any disc. Disc quality can affect write or rewrite success rates.

CD-R: TAIYOYUDEN CO., LTD.

MITSUBISHI CHEMICAL CORPORATION RICOH Co., Ltd. Hitachi Maxell Ltd.

CD-RW: MITSUBISHI CHEMICAL CORPORATION

RICOH Co., Ltd.

TECRA A3/S2 4-21

Toshiba S2 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

Table of Contents

Preface

Manual contents

Conventions

Equipment checklist

Features

Special features

Utilities

Options

Front with the display closed

Left side

Right side

Back side

Underside

Front with the display open

Keyboard Indicators

Optical Media drive

Region codes for DVD drives and media

Writable discs

DVDs

Formats

CD-RW/DVD-ROM drive

DVD-ROM drive

DVD±R/±RW (DVD Dual) drive supporting Double Layer

DVD Super Multi drive supporting Double Layer

DVD Super Multi drive

AC adaptor

Setting up your work space

General conditions

Placement of computer

Seating and posture

Lighting

Work habits

Connecting the AC adaptor

Opening the display

Turning on the power

Starting up for the first time

Turning off the power

Shut Down mode (Boot mode)

Hibernation mode

Standby mode

Restarting the computer

Restoring the preinstalled software

Restoring from the Product Recovery Media

Restoring from Recovery HDD

Using the TouchPad

TOSHIBA Dual Pointing Device

Using the TouchPad

Using the AccuPointII Pointing device

AccuPointII Pointing device precautions

Replacing the cap

Using the internal modem

IMPORTANT SAFETY INSTRUCTIONS

Region selection

Properties menu

Setting

Modem Selection

Connecting

Disconnecting

Connecting LAN cable

Disconnecting LAN cable

Wireless LAN

Wireless LAN disclaimer

Security

Wireless communication switch

Wireless communication LED

Changing Slim Select Bay modules

Removing a module

Inserting a module

Using optical media drives

Loading compact discs

Removing compact discs

Writing CDs on a CD-RW/DVD-ROM drive

Important message

Disclaimer

Before writing or rewriting