Toshiba RL953-40, RL953-32 User Manual
RL93* Digital
Series
RL95* Digital
Series
Register your TV online at
www.toshiba.co.uk/registration
Contents
English
INSTALLING YOUR TV
Safety Precautions ............................................................................. 4
Installation and important information ..................................... 5
The remote control (CT-90404) .................................................... 7
Inserting batteries and effective range ............................ 7
The remote control (CT-90420) .................................................... 8
Inserting batteries and effective range ............................ 8
CONNECTING YOUR TV
Connecting external equipment .................................................. 9
Connecting an HDMI® device ......................................................10
To connect an HDMI device ...............................................10
HDMI’s ARC (Audio Return Channel) feature ...............10
REGZA-LINK connection ................................................................11
Connecting a computer ................................................................12
To connect a PC to the RGB/PC terminal .......................12
To connect a PC to the HDMI terminal ...........................12
Connecting a home network ......................................................13
To connect the TV to a home network - Wired ...........13
To connect the TV to a home network
with an internet connection - Wireless ......................13
To connect the TV to the
Intel® Wireless Display ready PC ...................................13
Controls and input connections .................................................14
Switching on ............................................................................14
Using the menu system .......................................................14
Using the TV controls and connections .........................14
MENU structure ................................................................................15
SETTING UP YOUR TV
Startup Application .........................................................................16
Quick Setup ..............................................................................16
Ant/Cable In (if available) ....................................................18
Auto Tuning .............................................................................19
ATV Manual Tuning .........................................................................20
Tuning ........................................................................................20
Skip ..............................................................................................21
Sorting positions ....................................................................22
DTV Manual Tuning ........................................................................22
Manual Tuning ........................................................................22
Manual Tuning for DVB-C ...................................................23
DTV Settings ......................................................................................23
Channels ...................................................................................23
Standby Channel Update ....................................................24
Location setting ......................................................................24
Analogue switch-off ............................................................24
CONTROLS AND FEATURES
General controls ............................................................................... 25
Quick Menu ..............................................................................25
Selecting channels ................................................................25
The Time Display – analogue only .................................25
Stereo and Bilingual transmissions .................................25
Sound controls .................................................................................26
Volume controls and sound mute ...................................26
Dual ............................................................................................. 26
Balance ......................................................................................26
Bass, Treble .............................................................................. 26
Voice Enhancement .............................................................. 26
Dynamic Bass Boost ..............................................................26
Stable Sound® .........................................................................26
Dynamic Range Control ......................................................26
Audio Level Offset .................................................................27
TV Speakers On/Off ............................................................... 27
Headphone Settings .............................................................27
Audio Description ................................................................. 27
Widescreen viewing ....................................................................... 28
Picture controls ................................................................................ 30
Picture Mode ...........................................................................30
Picture preferences ...............................................................30
Reset ...........................................................................................30
ColourMaster ...........................................................................30
Base Colour Adjustment .....................................................31
Colour Temperature .............................................................31
Auto Brightness Sensor .......................................................31
Active Backlight Control ...................................................... 31
Black/White Level ..................................................................31
MPEG NR – Noise Reduction ..............................................31
Cinema Mode .......................................................................... 32
Resetting the advanced picture settings ......................32
Automatic Format (Widescreen) ......................................32
4:3 Stretch ................................................................................ 32
DNR – Digital Noise Reduction .........................................32
Blue Screen .............................................................................. 32
Picture Position ...................................................................... 32
Picture still ................................................................................ 32
Using your home network ...........................................................33
Setting up the Network ................................................................. 34
Wireless Setup ........................................................................ 34
Advanced Network Setup .................................................. 36
DNS Setup ................................................................................ 37
Network Connection Test ................................................... 37
Using the software keyboard ............................................38
Network Device Setup ................................................................... 38
External Control Setup ......................................................... 38
Device Name Setup .............................................................. 39
USB HDD Record Function ........................................................... 40
Setting up the USB HDD for recording ..........................40
To record DTV programmes
(One Touch Recording) .................................................... 40
How to set recordings via the Programme Guide .....41
To check, edit or delete scheduling information .......42
To view a recorded programme ....................................... 43
Operations from the Library screen ................................ 43
Recording Setup .................................................................... 44
Scheduling priority ............................................................... 46
Using Toshiba Places ...................................................................... 47
Using Hybrid TV Standard (if available) ...................................47
Using Intel® Wireless Display .......................................................48
Intel® Wireless Display Device Name ..............................48
PC List ......................................................................................... 48
Using the Media Player .................................................................. 49
Basic operation ....................................................................... 49
2
Viewing photo files
(on a DLNA CERTIFIED™ Server or USB device) .......50
Viewing movie files
(on a DLNA CERTIFIED™ Server or USB device) .......52
Playing music files
(on a DLNA CERTIFIED™ Server or USB device) .......55
Other features ................................................................................... 56
Panel Lock .................................................................................56
The timers ...........................................................................................56
Programme Timers – digital only ...................................56
On Timer ....................................................................................57
Sleep Timer ..............................................................................57
Energy Saving Settings ..................................................................58
Automatic Power Down ......................................................58
No Signal Power Down ........................................................58
Digital on-screen information .....................................................58
Information ..............................................................................58
Using EPG (Electronic Programme Guide) ..............................59
Using Broadcast Guide ........................................................59
Genre selection/searching ..................................................60
Using MediaGuide .................................................................60
MediaGuide screen ............................................................... 60
Primary Navigation menu ...................................................60
Digital settings – parental control ............................................61
Parental PIN Setup .................................................................61
Parental Setup .........................................................................62
Network Lock .......................................................................... 62
Digital settings – Channel Options ..........................................62
Selecting favourite channels .............................................62
Favourite Channel Lists .......................................................62
Skip channels ...........................................................................63
Locking channels ...................................................................63
Digital settings – other settings ................................................63
Subtitles .....................................................................................63
Audio languages ....................................................................63
Common Interface ................................................................64
Software Upgrade and Licences ................................................64
Searching for New Software ..............................................64
Network Upgrade ..................................................................64
Software Licences .................................................................. 64
System Information and Reset TV ............................................. 65
System Information ..............................................................65
Reset TV ..................................................................................... 65
PC Settings ......................................................................................... 65
Horizontal and Vertical Position .......................................65
Clock Phase .............................................................................. 65
Reset ...........................................................................................66
Sampling Clock .......................................................................66
Input selection and AV connections ........................................ 66
Input selection ........................................................................ 66
Digital Audio Output ............................................................67
Labeling video input sources ............................................67
Using REGZA-LINK ........................................................................... 68
Enable REGZA-LINK ............................................................... 68
TV Auto Power ........................................................................68
Auto Standby ..........................................................................68
Amplifier Control ................................................................... 68
Initial Speaker Setting ..........................................................68
REGZA-LINK input source selection ................................68
REGZA-LINK one touch play .............................................. 69
REGZA-LINK system standby .............................................69
TEXT SERVICES
Text services ......................................................................................70
Selecting modes ....................................................................70
Text information ....................................................................70
Navigating pages using Auto ............................................70
Navigating pages using LIST .............................................70
Control buttons ......................................................................71
PROBLEM SOLVING
Questions and Answers ............................................................... 72
INFORMATION
License Information ........................................................................ 75
Information ........................................................................................ 77
Specifications and accessories ................................................... 81
English
During the life of your TV firmware updates will be made available to ensure that your TV maintains optimum performance:
USB HDD Recording is supported on this TV, if this functionality is not implemented at time of purchase it will be made available via
*Please note the USB HDD recording feature will not be available in all countries.
Intel® Wireless Display (Intel® WiDi) is supported on this TV, if this functionality is not implemented at time of purchase it will be
If your TV is connected to the internet, firmware will be automatically made available.
If your TV is not connected to the internet, you can download the latest version of firmware from
*Some features are limited due to local legislation and may not be available in all countries
firmware update in mid 2012.
made available via firmware update in mid 2012.
www.toshiba-om.net/firmware.php
3
INSTALLING YOUR TV
Safety Precautions
English
This equipment has been designed and
manufactured to meet international safety standards
but, like any electrical equipment, care must be taken
to obtain the best results and for safety to be assured.
Please read the points below for your own safety.
They are of a general nature, intended to help with all
electronic consumer products, and some points may
not apply to the goods you have just purchased.
Air Circulation
Leave more than 10cm clearance around the
television to allow adequate ventilation. This will
prevent overheating and possible damage to the
television. Dusty places should also be avoided.
Heat Damage
Damage may occur if the television is left in direct
sunlight or near a heater. Avoid places subject to
extremely high temperatures or humidity. Place in a
location where the temperature remains between
5°C min. and 35°C max.
Mains Supply
The mains supply required for this equipment is 220240v AC 50/60Hz. Never connect to a DC supply or any
other power source. DO ensure that the television is
not standing on the mains lead. Use only the supplied
lead.
DO NOT cut off the mains plug from this equipment,
this incorporates a special Radio Interference Filter,
the removal of which will impair its performance.
In the UK, the fuse fitted in the plug is approved by
ASTA or BSI to BS1 362. It sh ould on ly be r eplace d by a
correctly rated and approved type and the fuse cover
must be refitted.
IF IN DOUBT, PLEASE CONSULT A COMPETENT
ELECTRICIAN.
Do
DO read the operating instructions before you
attempt to use the equipment.
DO ensure that all electrical connections (including
the mains plug, extension leads and i nter-connections
between pieces of equipment) are properly made and
in accordance with the manufacturers’ instructions.
Switch off and withdraw the mains plug before
making or changing connections.
DO consult your dealer if you are ever in doubt about
the installation, operation or safety of your equipment.
WARNING: To prevent injury, this apparatus must be
securely attached to the floor/wall in accordance with
the installation instructions. See page 5.
DO be careful with glass panels or doors on
equipment.
DO NOT REMOVE ANY FIXED COVERS AS THIS WILL
EXPOSE DANGEROUS AND ‘LIVE’ PARTS.
THE MAINS PLUG IS USED AS A DISCONNECTING DEVICE
AND THEREFORE SHOULD BE READILY OPERABLE.
Do not
DO NOT obstruct the ventilation openings of the
equipment with items such as newspapers,
tablecloths, curtains, etc. Overheating will cause
damage and shorten the life of the equipment.
DO NOT allow electrical equipment to be exposed to
dripping or splashing or objects filled with liquids,
such as vases, to be placed on the equipment.
DO NOT place hot objects or naked flame sources,
such as lighted candles or nightlights on, or close to
equipment. High temperatures can melt plastic and
lead to fires.
WARNING: To prevent the spread of
fire, keep candles or other open
flames away from this product at all
times.
DO NOT use makeshift stands and NEVER fix legs with
wood screws. To ensure complete safety, always fit
the manufacturer’s approved stand, bracket or legs
with the fixings provided according to the
instructions.
DO NOT leave equipment switched on when it is
unattended, unless it is specifically stated that it is
designed for unattended operation or has a standby
mode. Switch off by withdrawing the plug, and make
sure your family knows how to do this. Special
arrangements may need to be made for people with
disabilities.
DO NOT continue to operate the equipment if you
are in any doubt about it working normally, or it is
damaged in any way – switch off, withdraw the mains
plug and consult your dealer.
WARNING: Excessive sound pressure from earphones
or headphones can cause hearing loss.
ABOVE ALL - NEVER let anyone, especially
children, push or hit the screen and cabinet back,
or push anything into holes, slots or any other
openings in the case. These actions will damage
screen or internal parts.
NEVER guess or take chances with electrical
equipment of any kind - it is better to be safe than
sorry.
4
INSTALLING YOUR TV
Sturdy tie (as short as possible)
Stand clip
Fixing strap
Screw
(supplied)
Fixing strap
‘P’ Clip
Stand style is dependent on model
CAUTION: The diameter and length of the screws
differ depending on wall bracket model. Use of screws
other than the screws specified may result in internal
damage to the TV set or cause it to fall, etc.
Place four spacers (supplied).
Screw
Spacer (supplied)
TV back panel
Wall bracket
28–42mm (23RL)
28–32mm (32/40RL)
M4 (23RL)
M6 (32RL)
M8 (40RL)
32/40RL 23RL
Installation and important information
Where to install
Locate the television away from direct sunlight and strong
lights. Soft, indirect lighting is recommended for
comfortable viewing. Use curtains or blinds to prevent
direct sunlight falling on the screen.
Place the TV on a stable, level surface that can support
the weight of the TV. In order to prevent injury and
maintain stability of this apparatus, secure the TV to
the level surface using the strap if fitted, or to a wall
using a sturdy tie to the P clips provided. Otherwise
secure the TV on the level surface using the supplied
mounting screw.
The LCD display panels are manufactured using an
extremely high level of precision technology; however,
sometimes some parts of the screen may be missing
picture elements or have luminous spots. This is not a sign
of a malfunction.
Make sure the television is located in a position where it
cannot be pushed or hit by objects, as pressure will break
or damage the screen. Also, please be certain that small
items cannot be inserted into slots or openings in the case.
Avoid using chemicals (such as air refreshers, cleaning agents, etc.) on or near the TV pedestal. Studies
agents and mechanical stress (such as weight of TV). Failure to follow these instructions could result in serious
injury and/or permanent damage to TV and TV pedestal.
Please use a wall bracket appropriate for the size and weight
of the LCD TV.
• Two people are required for installation.
• To install a wall-mount from another manufacturer, use the
1 Unplug and remove any cables and/or other component
2 Carefully lay the front of the unit face down on a flat,
3 Follow the instructions provided with your wall bracket.
4 Make sure to place the spacers supplied between the
5 Always use the screws supplied or recommended by the
indicate that plastics may weaken and crack over time from the combination effects of chemical
When using a Wall Bracket
Removing the Pedestal Stand:
1 Carefully lay the front of the unit face down on a flat,
cushioned surface such as a quilt or blanket. Leave the
SPACERS (supplied).
connectors from the rear of the TV.
cushioned surface such as a quilt or blanket.
Before proceeding, make sure the appropriate bracket(s)
are attached to the wall and the back of the TV as
described in the instructions provided with the wall
bracket.
bracket and the back of the TV.
wall mount manufacturer.
stand protruding over the edge of the surface.
NOTE: Extreme care should always be used when
removing the pedestal stand to avoid damage to the LCD
panel.
2 Remove the four screws.
3 Once you have removed all four screws holding the
pedestal stand in place, remove the pedestal stand from
the TV by sliding the pedestal stand away from the TV.
English
5
INSTALLING YOUR TV
English
The digital reception function of this television is only effective in the countries listed in the “Country” section of
the “System Seup” menu. Depending on country/area, some of this television's functions may not be available.
Reception of future additional or modified services can not be guaranteed with this television.
If stationary images generated by 4:3 broadcasts, text services, channel identification logos, computer displays,
video games, on-screen menus, etc. are left on the television screen for any length of time, they could become
conspicuous. It is always advisable to reduce both the brightness and contrast settings.
Very long, co ntinuous use of the 4:3 picture on a 16:9 screen may result in some re tention of th e image at the 4:3
outlines. This is not a defect of the LCD TV and is not covered under the manufacturer’s warranty. Regular use of
other size modes (e.g.: Super Live) will prevent permanent retention.
Please take note
EXCLUSION CLAUSE
Toshiba shall under no circumstances be liable for loss and/or damage to the product caused by:
i) Fire;
ii) Earthquake;
iii) Accidental damage;
iv) Intentional misuse of the product;
v) Use of the product in improper conditions;
vi) Loss and/or damage caused to the product whilst in the possession of a third party;
vii) Any damage or loss caused as a result of the owner’s failure and/or neglect to follow the instructions set out in the owner’s
manual;
viii) Any loss or damage caused directly as a result of misuse or malfunction of the product when used simultaneously with
associated equipment;
Furthermore, under no circumstances shall Toshiba be liable for any consequential loss and/or damage including but not
limited to the following: loss of profit, interruption of business, the loss of recorded data whether caused during normal
operation or misuse of the product.
When Using a USB HDD
• The recording function has been designed for
private use and entertainment in your home
environment. Please note that any commercial
use of the recording function could lead to
copyright infringement of authors’ rights.
Toshiba asks you to respect the intellectual
property rights of third parties.
• Before recording to a device connected to the TV,
make a test recording and check the recording
performance.
• Programmes that are prohibited from copying
due to copyright protection cannot be recorded.
• Toshiba shall not be liable for compensation or
incidental damages of any kind whatsoever
resulting from content that was not properly
recorded on the recording device or that was
modified or lost.
• Toshiba shall not be liable for damages of any
kind whatsoever (breakdown of the recording
device, modification or loss of the recorded
content, etc.) resulting from malfunction,
operating failure or incorrect operation due to
combining with another connected device.
• If you connect a USB HDD that has been used
with a PC or another TV, only programmes which
are recorded using this TV can be playback.
• Turn off the TV power supply before if you
disconnect USB HDD.
Not doing so may result in loss of the recorded data
or malfunction of the USB HDD.
• Please note that recording on the USB HDD is no
longer playable after the TV’s main-board is
exchanged during service.
6
The remote control (CT-90404)
CT-90404
1
2
5
4
8
9
20
17
16
22
11
24
27
26
25
23
21
18
14
19
15
13
12
10
3
6
7
28 29
Simple at-a-glance reference of your remote control.
1 For On/Standby mode
2 To select external input sources
3 To select TV Mode (DTV Ant/DTV Cable/ATV)
4 Selectable Picture
5 Widescreen viewing
s Stereo/bilingual transmissions
6
7 Digital Subtitles or Analogue TEXT Subtitle pages if available
8 Number buttons
9 Switch the Audio Description On/Off
10 To return to previous channel
11 To alter the TV volume
12 To display on-screen information
To access the index page in Text mode
13 To mute the TV sound
14 To access Quick Menu
15 To change programme positions
To change TEXT pages
INSTALLING YOUR TV
16 To access the “TOSHIBA PLACES” Top Page
When network is not connected, an error message will be
displayed.
17 To access Media Player Menu
18 To call up text services
19 To access the analogue or digital Channel List
20 On-screen Menus
21 To display the digital on-screen Programme Guide
22 To page up, down, left or right
23 When using menus, the arrows move the cursor on the screen
up, down, left or right. Press OK to confirm your selection
24 To return to previous Menu
25 To exit menus and applications
26 When in TV mode:
D Analogue time
display
When using Programme
Guide:
Z –24 hours
z +24 hours
CC –1 page
cc +1 page
27 Colour buttons: Text and interactive service control buttons
28 Picture still
29 To record DTV programmes
When in Text mode:
A To reveal concealed
text
B To hold a wanted
page
C To enlarge text
display size
D To select a page
while viewing a
normal picture
During Playback:
c To PLAY
v To STOP
W/w To PAUSE/STEP
Z To SKIP-BACK
CC To REWIND
cc To FAST FORWARD
z To SKIP-FORWARD
Inserting batteries and effective range
Remove the back cover to
reveal the battery
compartment and make sure
the batteries are inserted the
proper way. Suitable battery
types for this remote are AA,
IEC R6 1.5V.
Do not combine a used, old
battery types. Remove dead batteries immediately to preven t
acid from leaking into the battery compartment. Dispose of
them in accordance with instructions on page 76 of this
manual.
Warning: Batteries must not be exposed to excessive heat
such as sunshine, fire or the like.
The performance of the remote control will deteriorate
beyond a distance of five metres or outside an angle of 30
degrees from the centre of the television. If the operating
range becomes reduced, the batteries may need replacing.
battery with a new one or mix
English
7
INSTALLING YOUR TV
7
The remote control (CT-90420)
English
Simple at-a-glance reference of your remote control.
2
3
7
10
12
16
17
22
24
25
1
4
5
86
9
11
14
13
15
18
19
2120
23
2
26
15 To mute the TV sound
16 To access Quick Menu
17 On-screen Menus
18 To display the digital on-screen Programme Guide
19 When using menus, the arrows move the cursor on the screen
up, down, left or right. Press OK to confirm your selection
20 To return to previous Menu
21 To exit menus and applications
22 Colour buttons: Text and interactive service control buttons
23 When in TV mode:
D Analogue time
display
When using Programme
Guide:
Z –24 hours
z +24 hours
CC –1 page
cc +1 page
24 To record DTV programmes
25 Picture still
26 To call up text services
27 Digital Subtitles or Analogue TEXT Subtitle pages if available
When in Text mode:
A To reveal concealed
text
B To hold a wanted
page
C To enlarge text
display size
D To select a page
while viewing a
normal picture
During Playback:
c To PLAY
v To STOP
W/w To PAUSE/STEP
Z To SKIP-BACK
CC To REWIND
cc To FAST FORWARD
z To SKIP-FORWARD
1 For On/Standby mode
2 To select external input sources
3 Selectable Picture
4 Widescreen viewing
s Stereo/bilingual transmissions
5
6 To access the “TOSHIBA PLACES” Top Page
When network is not connected, an error message will be
displayed.
7 To select TV Mode (DTV Ant/DTV Cable/ATV)
8 To access the analogue or digital Channel List
9 Number buttons
10 Switch the Audio Description On/Off
11 To return to previous channel
12 To alter the TV volume
13 To change programme positions
To change TEXT pages
14 To display on-screen information
To access the index page in Text mode
Inserting batteries and effective range
Remove the back cover to
reveal the battery
compartment and make sure
the batteries are inserted the
proper way. Suitable battery
types for this remote are AAA,
IEC R03 1.5V.
Do not combine a used, old
battery types. Remove dead batteries immediately to preven t
acid from leaking into the battery compartment. Dispose of
them in accordance with instructions on page 76 of this
manual.
Warning: Batteries must not be exposed to excessive heat
such as sunshine, fire or the like.
The performance of the remote control will deteriorate
beyond a distance of five metres or outside an angle of 30
degrees from the centre of the television. If the operating
range becomes reduced, the batteries may need replacing.
battery with a new one or mix
8
CONNECTING YOUR TV
LAN port
SCART (EXT 1)
DIGITAL AUDIO OUTPUT
(OPTICAL)
HDMI 3 INPUT
HEADPHONE jack
HDMI 1/2 INPUTS
COMPONENT VIDEO/AUDIO INPUT
VIDEO/AUDIO INPUT (Y/L/R)
(EXT 2)
RGB/PC INPUT
Media Recorder
Aerial Cable
Power cord
ILLUSTRATION SHOWS 40RL933.
Connecting external equipment
Before connecting any external equipment, turn off all main power switches. If there is no switch,
remove the mains plug from the wall socket.
English
Aerial cables: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connect the aerial to the socket on the rear of the television.
If you use a decoder and/or a media recorder, it is essential
that the aerial cable is connected through the decoder and/o r
through the media recorder to the television.
SCART leads: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connect the media recorder IN/OUT socket to the television.
Connect the decoder TV socket to the television.
Before running Auto Tuning, put your decoder and media
recorder to Standby.
The RCA sockets alongside the COMPONENT VIDEO INPUT
sockets will accept L and R audio signals.
When connecting the VIDEO/AUDIO devices, connect those
cables to Y/L/R sockets.
The Digital Audio Output socket enables the connection of a
suitable surround sound system.
NOTE: This output is always active.
HDMI® (High-Definition Multimedia Interface) is for use with
a DVD decoder or electrical equipment with digital audio and
video output. For acceptable video or PC signal formats
through the HDMI terminals, see page 78.
NOTE: Although this television is able to connect to HDMI
equipment, it is possible that some equipment may not
operate correctly.
LAN port is used to connect the TV to your home network.
This TV can play digital content stored on a DLNA CERTIFIED™
product with server function.
A wide variety of external equipment can be connected to
the back of the television; therefore, the relevant owner’s
manuals for all additional equipment must be referred to
for exact instructions.
If the television automatically switches over to monitor
external equipment, return to normal television by pressing
the desired programme position button. To recall external
equipment, press
HDMI 1, HDMI 2, HDMI 3 or PC.
When the external input mode is s elected while viewing DTV
mode, the SCART socket does not output video/audio signals.
o to select between TV, EXT 1, EXT 2,
9
CONNECTING YOUR TV
HDMI cable
HDMI device
the back of your television
Connecting an HDMI® device
English
The HDMI input on your television receives digital
audio and uncompressed digital video from an
HDMI source device.
This input is designed to accept HDCP (High-Bandwidth
Digital-Content Protection) programme material in digital
form from EIA/CEA-861-D–compliant consumer electronic
devices (such as a set-top box or DVD player with HDMI
output). For acceptable video signal formats, see page 78.
NOTE: Supported Audio format: Linear PCM, Dolby Digital
(AC-3), sampling rate 32/44.1/48kHz.
To connect an HDMI device
Connect an HDMI cable (type A connector) to the HDMI
terminal.
For proper operation, it is recommended that you use an
HDMI cable with the HDMI Logo ( ).
• If your HDMI connection is capable of 1080p and/or your
television is capable of refresh rates greater than 50Hz, you
will need a Category 2 cable. Conventional HDMI/DVI cable
may not work properly with this model.
• HDMI cable transfers both video and audio. Separate
analogue audio cables are not required (see illustration).
HDMI’s ARC (Audio Return Channel)
feature
This feature enables the audio signal of the TV to
be sent to the AV amplifier via the HDMI cable. It
will not be necessary to connect a cable from the
audio output of the TV to the audio input of the AV
amplifier to reproduce the audio received from the
tuner of the TV through the AV amplifier.
the back of your television
AV amplifier that supports ARC
HDMI cable
To view the HDMI device video, press the
HDMI 1, HDMI 2 or HDMI 3 mode.
o button to select
10
CONNECTING YOUR TV
AV amplifier Playback device
Playback device
the back of your television
REGZA-LINK connection
You can control the basic functions of connected audio/video devices using the television’s remote
control if you connect a REGZA-LINK compatible AV amplifier or playback device. For an explanation of
setup and operations, see pages 68–69.
English
For the setup shown above, you will need three HDMI cables.
NOTE:
• If several devices are connected, the REGZA-LINK feature
may not operate properly.
• For proper operation, it is recommended that you use HDMI
cables with the HDMI Logo ( ).
• This function is available when one PC and one AV amplifier
are connected separately. However, it may not operate
properly if the PC is connected via the AV amplifier.
Before controlling the device(s):
• After completing the above connections, set the REGZALINK Setup menu as you desire (see page 68).
• The connected devices must also be set. For details, see the
operation manual for each device.
• The REGZA-LINK feature uses CEC technology as regulated
by the HDMI standard.
• This feature is limited to models incorporating Toshiba’s
REGZA-LINK. However, Toshiba is not liable for those
operations. Refer to individual instruction manuals for
compatibility information.
11
CONNECTING YOUR TV
Connecting a computer
English
With either an RGB/PC or an HDMI connection, you
can watch your computer’s display on the
television.
To connect a PC to the RGB/PC terminal
When connecting a PC to the RGB/PC terminal on the
television, use an analogue RGB (15-pin) computer cable.
the back of your television
Mini D-sub
15 pin connector
Computer
RGB PC cable (not
supplied)
Conversion adaptor
if required
(not supplied)
To use a PC, set the monitor output resolution on the PC
before connecting it to the television. For acceptable PC
signal formats, see page 77.
To display the optimum picture, use the PC setting feature
(see page 65).
NOTE:
• Some PC models cannot be connected to this television.
• An adaptor is not needed for computers with a compatible
mini D-sub15-pin terminal.
• Depending on the DVD’s title and the specifications of the
PC on which you are playing the DVD-Video, some scenes
may be skipped or you may not be able to pause during
multi-angle scenes.
• A ban d m ay a ppe ar at t he e dg es o f th e s cre en o r p art s of th e
picture may be obscured. This is due to scaling of the
picture by the set, it is not a malfunction.
• When PC input mode is selected, some of the television’s
features will be unavailable e.g. Colour System in the
System Setup menu.
• Some PC models may output unique signals that the
television may be unable to detect (see page 77).
• If connecting a certain PC model with a unique PC signal,
the PC signal may not be detected correctly.
To connect a PC to the HDMI terminal
When connecting a PC to the HDMI terminal on th e television,
use an HDMI-to-DVI adaptor cable.
If connecting a PC with an HDMI terminal, use an HDMI cable
(type A connector).
the back of your television
Computer
HDMI-to-DVI
adaptor cable
For acceptable PC and video signal formats, see page 78.
NOTE:
• The edges of the images may be hidden.
• If connecting a certain PC model with a unique PC signal,
the PC signal may not be detected correctly.
12
CONNECTING YOUR TV
Modem (if available)
Server PC
Router with Hub
the back of your television
Cable or Phone jack
[1] [2]
[2]
[3][2]
Access point (AP)
Wireless LAN router
Modem
TOSHIBA Dual
Band WLAN
adaptor
the back of your television
Computer
Intel® Wireless Display
ready PC
TOSHIBA Dual
Band WLAN
adaptor
Intel® WiDi
English
Connecting a home network
The LAN port allows your Toshiba TV to connect to
your home network. You can use this revolutionary
home entertainment networking system to access
photo, video and audio files that are stored on a
DL NA CER TIF IED ™ s erv er a nd pla y/d isp la y th em o n
your TV.
NOTE:
• If you connect to a shared network outside your home, it is
advisable to use a router. Always use DLNA CERTIFIED™
products in private network environments. Con nect this TV
to the same router as other DLNA CERTIFIED™ products
(server).
• If you use a hub or switch to connect the TV to your home
network, you may not be able to use the automatic setup
and will have to manually set up the network address. See
page 36.
• If you use a router with built-in DHCP functionality, use the
automatic setup. Manual setup may not work.
• If you connect the TV and PC directly, use a crossover LAN
cable.
• Please ask PC manufacturer about details of PC settings.
• Wireless appliances may interfere with WiDi function and
DTVdisplay.
To connect the TV to a home network -
Wired
To connect the TV to a home network
with an internet connection - Wireless
Please refer to “Wireless Setup” section on page 34.
How to use this Dual Band Wireless LAN Adaptor
• If this device is going to be operated in the frequency ran ge
of 5.15 GHz to 5.35 GHz, it is restricted to indoor use.
• If this device is going to be operated for 802.11 b/g/n
function in the frequency range of 2.454 GHz to 2.4835 GHz
in France, it is restricted to indoor use.
• A general authorization is required for using this device
outdoors or in public places in Italy.
• This device is NOT ALLOWED to be used in the geographical
area wit hin a radius of 20km from the cen tre of Ny-Alesu nd
in Norway.
To connect the TV to the Intel® Wireless
Display ready PC
[1] Coaxial or telephone cable (depending on your modem typ e)
[2] Standard LAN cable
[3] Do NOT connect a phone jack directly to the TV’s LAN port.
13
CONNECTING YOUR TV
40RL933.ILLUSTRATION SHOWS
COMMON INTERFACE
The Common Interface is for a Conditional Access
Module (CAM).
Contact a service provider.
The software updating of CI Plus CAM may be
automatically executed. At this time, your
Recording/Reminder programming will be canceled.
Ambient
Light Sensor
RED LED – Standby
GREEN LED – Power on
ORANGE LED – Programme
timer set (digital only)
RED LED – Recording
USB port
Media Player/Wireless LAN adaptor ready for a home
network
USB HDD connection ready
Control panel
Controls and input connections
English
A wide variety of external equipment can be connected to the input sockets on the side of the television.
While all the necessary adjustments and controls for the television are made using the remote control, the
buttons on the television may be used for some functions.
Switching on
If the RED LED is not lit, check that the mains plug is
connected to the power supply and press
control; it may take a few moments. The GREEN LED will be lit.
To put the television into Standby, press
control. To view the television, press
take a few seconds to appear.
For energy saving:
We recommend that you use the television with the factory
settings. The factory settings are for energy saving.
Unplugging the mains plug will cut energy use to zero for
all televisions. This is recommended when the television is
not being used for a long time, e.g. when on holiday.
Reducing the brightness of the screen will reduce energy use.
Energy efficiency cuts energy consumption and thus saves
money by reducing electricity bills.
NOTE: Putting the television into standby mode will reduce
energy consumption, but will still draw some power.
Press MENU on the remote control to display the menu.
The menu appears as a list of five topics. As each symbol is
selected by pressing
respective options will appear above.
NOTE: The same menu is displayed in DTV (Digital TV) and
ATV (Analogue TV) modes; however, where some items are
not available in a mode, they will appear grayed out.
Using the menu system
C or c on the remote control, its
1 on the remote
1 again. The picture may
1 on the remote
To use the option, press
move up and down and press
setting.
B and b on the remote control to
C or c to select your desired
Using the TV controls and connections
• To turn on or off the TV, press
• To alter the volume, press + or – .
+ and – buttons operate as volume up/down as default.
• To alter the programme position, press
u
or U.
press
• To select an external input, press and hold
Inputs window appears, and then press
appropriate input source.
The Media Player feature provides access to photo, movie and
music files stored on a USB storage device that is connected
via the USB port or on a network device.
The USB port also has to be used with the “TOSHIBA Dual Band
WLAN Adaptor WLM-20U2” in order to access a wireless
network.
You must use the TOSHIBA Wireless LAN device to ensure
correct operation of this feature. This feature is available only
when the “TOSHIBA Dual Band WLAN Adaptor“ is used.
Please always refer to the owner’s manual of the equipment to be
connected for full details.
NOTE:
• The USB socket has limited functionality and Toshiba can
take no responsibility for damage to other connected
equipment.
• Interactive video games that involve shooting a “gun” at an
on-screen target may not work with this TV.
14
!.
p / o once and
p / o until the
u
or U to select the
MENU structure
TV Programmes
Media Player
Connected TV
Setup
Function
Genre Search
Guide
Programme
Timers
Library
To open the main menu (illustration below) , press MENU on the remote control.
1st Layer 2nd Layer 3rd Layer
Press MENU. Press
TV Programmes
C c / B. Press C c.Press OK. Press BbC c.
CONNECTING YOUR TV
English
Media Player
Connected TV
Function
Setup
Guide
Genre Search
Programme Timers
Library
USB Media Player
Network Media Player
Toshiba Places
On Timer
Sleep Timer
Intel® Wireless Display
Picture
Sound
Preferences
System Setup
Jump to Programme Guide (EPG)
Jump to Genre Search
Jump to Programme Timers
Jump to Library
USB Media Player Menu
Network Media Player Menu
Jump to Toshiba Places
NOTE: This menu item is subject to
change without notice.
On Timer Menu
Sleep Timer Menu
Jump to Intel® Wireless Display
Picture Menu
Sound Menu
Preferences Menu
System Setup Menu
15
SETTING UP YOUR TV
Quick Setup
Country
UK
Primary Subtitle Language
German
English
English
English
Secondary Subtitle Language
Primary Audio Language
Secondary Audio Language
Network Setup
Yes
Do you want to configure network setup?
Network Type
Wired
Please select a network type.
Wireless Setup
Assisted Setup
Please select a kind of wireless network.
Startup Application
English
Before switching on the TV, make sure your
decoder/media recorder, if applicable, is in
standby. To set up the television, use the buttons
on the remote control as detailed on page 7.
Quick Setup
a Press the 1 button. The Menu Language screen will
appear. This screen will appear the first time that the
television is switched on and each time Reset TV is
selected.
b Press BbCc to select the menu language and
press OK.
c Highlight Country and press C or c to select. The
television is now set to tune the stations for your
country.
NOTE:
• The following display menus will differ slightly
according to the country you selected.
• If there is not a country that you want to select in the
list, select Others.
d Press OK, and the Location screen will appear.
Location
To use the TV for displaying in a store showroom,
please select [Store]. [Home] mode is
recommended for normal use.
Home
e Press C or c to select Home or Store. For normal
home use, select Home.
f Press OK, and the AutoView screen will appear, press
C or c to select Yes or No.
AutoView
AutoView mode automatically adjusts picture
settings to suit ambient light conditions. Do you
wish to enable AutoView mode?
No
g Press OK, and the Network Setup screen will appear.
Press
C or c to select Yes or No.
• When you select No, skip to step 15.
h Press OK, and the Network Type screen will appear.
Press
C or c to select Wired or Wireless.
• When you select Wired (LAN cable connection),
skip to step 12.
• When you select Wireless (USB WLAN adaptor
connection), follow step 9.
NOTE: If the USB WLAN adaptor is not connected,
Network Type screen does not display and skip to
step 12.
i Press OK, and the Wireless Setup screen will appear.
Press
C or c to select the Wireless Setup type.
• Assisted Setup - follow step 10.
Input the Security Key only.
• Manual Setup, skip to step 11.
Input the all settings.
NOTE: EXIT is available during settings.
j In step 9, when you select Assisted Setup;
Press OK, and the Assisted Setup screen will appear.
Press
B or b to select the desired AP and press OK.
NOTE: Check the MAC address on the label of the AP
or in the manual, and select your AP.
B or b to select Security Key and press OK.
Press
The Software Keyboard window will appear (page 38).
Input the Security Key by using the Software
Keyboard. To save your setting, press the BLUE
button.
NOTE:
• The Security Key must adhere to these conditions:
- TKIP/AES: 8-63 ASCII or 64 Hex characters
- WEP: 5 or 13 ASCII or 10 or 26 Hex characters
• There is only one key ID to set for WEP encryption.
B or b to highlight Done and press OK.
Press
NOTE:
• If Network Name is not displayed, see Manual Setup
below to set Network Name before pressing Done.
•If BACK is pressed before Done is selected, settings
are not saved.
When the message “Wireless configuration is
complete.” appears on screen, press OK.
The screen will skip to step 12.
16
SETTING UP YOUR TV
IP Address Setup
Auto Setup
Default Gateway
Subnet Mask
IP Address
On
On
00:11:22:33:44:55
DNS Setup
Auto Setup
Secondary DNS Address
MAC Address
Primary DNS Address
Next
XXX . XXX . XXX . XXX
XXX . XXX . XXX . XXX
XXX . XXX . XXX . XXX
XXX . XXX . XXX . XXX
XXX . XXX . XXX . XXX
Advanced Network Setup
English
k In step 9, when you select Manual Setup;
Press OK, and the Manual Setup screen will appear.
Press
B or b to select Network Name and press OK.
The Software Keyboard window will appear (page 38).
Input the Network Name by using the Software
Keyboard. To save your setting, press the BLUE
button.
Press
B or b to select Authentication and then press
C or c to select Open System, Shared Key, WPA-
PSK or WPA2-PSK.
B or b to select Encryption, and then press C
Press
or
c to select None, WEP, TKIP or AES.
NOTE:
• Certain encryption types are only compatible with
specific authentication types.
- When Authentication is Open System, only WEP
or None is compatible.
- When Authentication is Shared Key, only WEP is
compatible.
- When Authentication is WPA-PSK or WPA2-PSK,
only TKIP or AES is compatible.
• When incompatible Authentication/Encryption
pairings are detected, a warning message will be
displayed, and no connection attempt will be made
until the incompatibility is resolved.
• There is only one key ID to set for WEP encryption.
B or b to select Security Key and press OK.
Press
Input the Security Key by using the Software
Keyboard (page 38).
To save your setting, press the BLUE button.
This item is grayed out when Encryption is None.
When Encryption is WEP, Key ID setting is available.
Press
B or b to select Key ID and press C or c to
select 1(default), 2, 3 or 4.
Press
B or b to select Done and press OK.
When the message “Wireless configuration is
complete.” appears on screen, press OK.
NOTE: Settings are not saved if BACK is pressed
before Done is selected.
l The Advanced Network Setup screen will appear.
When the DHCP function of the router connected
with this TV is On, you can set Auto Setup to On or
Off. (This should usually be set to On.)
Whe n the DH CP fun ction o f the r outer i s Off, set Auto
Setup to Off, and set the IP Address DNS address(es)
manually.
You can view the fixed MAC address for the TV and for
the Dual Band WLAN Adaptor, if one is installed.
Press
B or b to select Next.
m Press OK, and Network Connection Test will start.
A message will appear to indicate if the connection
was successful or it could not be completed.
Network connection was completed successfully.
OK
NOTE: The result of Network Connection Test does
not always guarantee the connection.
To cancel the Network Connection Test:
Press BACK while searching for the Internet
connection.
17
SETTING UP YOUR TV
Ant/Cable In
Cable
Next
Antenna
Auto Tuning - Antenna
Progress Found
ATV Tune Waiting...
: C7Channel
DTV Tune 3 % 2
PLEASE NOTE
The Quick Setup menu c an also be acc essed at any
time from the Setup / System Setup menu.
Auto Tuning - Cable
DTV and ATVTuning Mode
DTV
OthersOperator Selection
Quick ScanScan Type
AutoStart Frequency
AutoEnd Frequency
AutoModulation
AutoSymbol Rate
AutoNetwork ID
Start Scan
n Press OK. If your country supports Network Guide,
English
The Guide Type screen will appear.
Guide Type
Please select Guide Type.
Broadcast Guide
C or c to select Broadcast Guide or
Press
MediaGuide.
NOTE: If you select MediaGuide, it may take time to
access the Guide screen depending on active channel
numbers.
o Press OK. If the Ant/Cable In screen appears, press B
or
b to select Antenna or Cable, and then press OK
to check ( ).
p Select Next and press OK. The Auto Tuning start up
screen will appear with the option to select between
DTV and ATV, DTV or ATV if available. Use
select the appropriate mode.
C or c to
q Press B or b to highlight Start Scan, and then press
OK.
The television will start to search for available DTV
and/or ATV channels. The progress bar will indicate
the scan status.
You must allow the television to comp lete the
search.
r Press C or c to view the DTV (digital channel) or ATV
(analogue channel) lists.
s Use B or b to move through the list to select a
channel, and then press OK to view.
In ATV mode, some areas may receive duplicate
stations. There may not be a clear picture or the signal
may be weak, so the station order can be changed
using ATV Manual Tuning.
REMEMBER: Press TV at any time to select between
ATV and DTV modes.
NOTE: The time will be set automatically by
transmission but can be advanced or decreased by
using Local Time Setting in the DTV Settings screen.
Ant/Cable In (if available)
From this menu, you can set the RF input configuration.
a Press MENU / C c to highlight Setup icon.
b Press B / C c to highlight System Setup icon and
press OK.
c Press b to select Ant/Cable In and press C or c to
select Antenna or Cable.
NOTE: When you attempt to change the Ant/Cable
In setting, a warning message will appear followed by
PIN entry (if PIN has been set) and a prompt for Auto
Tuning.
When the search is complete, the television will
automatically select channel one.
The Auto Tuning screen will display the total number
of services found.
d When Ant/Cable In is set to Cable, the following
setting options will be provided in the Auto Tuning
screen.
Press
B or b to select an item and press C or c to
select your desired option.
18
With the exception of DTV Scan Type and DTV Modulation
items, all of the following items will have 2 operating modes.
The first is Auto where the values for each item are preset by
the system. The second is an Input mode where you will be
able to enter a single value in place of the pre-set value. If no
channel is currently tuned and the Input state is chosen, a
system default value will be shown. However, if a channel is
currently tuned when the item is accessed, the value of the
current channel will be displayed.
Operator Selection:
You can choose the Cable operator depending on the
Country you set.
DTV Scan Type:
This item determines whether a Quick Scan or a Full Scan will
be executed.
The Quick Scan is a simplified version of the Full Scan that is
designed to complete in less time.
DTV Start Frequency:
This sets the frequency from which the scan will begin.
DTV End Frequency:
This sets the frequency at which the scan will end.
DTV Modulation:
You can choose from five QAM modulation settings.
DTV Symbol Rate:
This is the baud rate (KS/s) of the scan.
DTV Network ID:
This is the Network ID to be utilized for the scan. This item is
grayed out when DTV Scan Type is set to “Full Scan”.
Auto Tuning
NOTE: As new services are broadcast, it will be necessary to
re-tune the television in order to view them.
Auto Tuning will completely re-tune the television and can be
used to update the channel list. It is recommended that Auto
Tuning is run periodically to ensure that all new services are
added. All current channels and settings, i.e. locked channels,
will be lost.
a Press MENU / C c to highlight Setup icon.
SETTING UP YOUR TV
c Press B or b to select Auto Tuning and press OK.
System Setup
Menu Language
Country
Ant/Cable In
Auto Tuning
ATV Manual Tuning
DTV Manual Tuning
DTV Settings
Quick Setup
English
Germany
d Press C or c to select Yes and press OK.
Auto Tuning - Antenna
DTV and ATVTuning Mode
Start Scan
C or c to select DTV and ATV, DTV or ATV, if
Press
available, then highlight Start Scan and press OK to
continue with the Auto Tuning.
NOTE: If you have selected “Others” for the Country
field in the System Setup menu, and selected a
tuning mode other than “DTV” , choose the optimum
ATV broadcasting system (B/G, I, D/K or L).
The television will start to search for all available DTV
and/or ATV services.
You must allow the television to complete the
search.
When the search is complete, the Auto Tuning screen
will display the services found.
e Press B or b to move through the list to select a
channel and press OK to view.
English
b Press B / C c to highlight System Setup icon and
press OK.
19
SETTING UP YOUR TV
System Setup
Menu Language
English
Country
Ant/Cable In
ATV Manual Tuning
DTV Manual Tuning
Quick Setup
DTV Settings
Auto Tuning
Germany
Pos. Channel Station
ATV Manual Tuning
1
2
3
4
6
7
8
C2
C7
S10
S40
C22
5
C25
C28
C30
ATV Manual Tuning
System
I
A
1
C
2
0
ATV Manual Tuning
Search
I
A
1
C
2
0
ATV Manual Tuning
English
Tuning
The television can be tuned-in manually using ATV Manual
Tuning. For example, you might use the feature if the television
cannot be connected to a media recorder/decoder with a SCART
lead or when you want to tune-in a station on another System.
C and c to move across the screen and select any of the
Use
ATV Manual Tuning options. Then use
settings.
ATV Manual Tuning
System
1
I
A
2
C
123 4 65 7 8 9
1 Position
The number to be pressed on the remote control to tune
the channel.
2 System
Specific to certain areas.
3 Colour System
Factory set to Auto, should only be changed if problems
are experienced, i.e. NTSC input from external source.
4 Skip
Set Skip to On (
See page 21.
5 Signal Class
The channel classification.
6 Channel
The channel number on which a station is being
broadcast.
7 Search
Search up and down for a signal.
8 Manual Fine Tuning
Only used if interference/weak signal is experienced. See
page 72.
9 Station
Station identification. Use the
enter up to seven characters.
To allocate a position on the television for a decoder and
media recorder: turn the decoder on, insert a pre-recorded
film in the media recorder, press PLAY and manually tune.
8) or Off (() for the selected channel.
B or b to adjust the
CVR
0
B b and C c buttons to
a In the System Setup menu, press b to select ATV
Manual Tuning and press OK.
b Use B or b to select the desired position. We suggest
Pos. 0 for a media recorder.
Different Channel numbers may be displayed.
c Press OK to select. If the channel chosen for the media
recorder is set to skip, Skip should be removed before
storing.
d Press c to select System and press B or b to change
if required.
e Then press c to select Search.
f Press B or b to begin the search. The search symbol
will flash.
20
SETTING UP YOUR TV
PLEASE NOTE
ATV Manual Tuning
Station
I
A
1
C
2
0
CVR
Pos. Channel Station
ATV Manual Tuning
1
2
3
4
6
7
8
C2
C7
S10
S40
C22
ABC1
ABC1
5
C25
C28
C30
ATV Manual Tuning
Skip: On
I
A
1
C
2
0
English
g Each signal will show on the television. If it is not your
media recorder, press
search.
B or b again to restart the
h When your media rec order si gnal is fo und, pres s c to
move along to Station. Use
the required characters, e.g. VCR.
B, b, C and c to put in
i Press OK to save.
j Repeat for each position you want to tune.
k Press EXIT when you have finished.
This television has direct channel entry if the
channel numbers are known.
Select the ATV Manual Tuning screen in Step 3.
Enter the Position number, the System, then C for
standard (terrestrial) channels or S for cable
channels and the Channel number. Press OK to
save.
Skip
To prevent certain channels from being viewed, positions can be
skipped.
a Select ATV Manual Tuning from the System Setup
menu.
b Use B or b to highlight the position to be skipped
and press OK to select.
c Press c to select Skip.
d Use B or b to turn Skip on.
Press OK.
8 on the screen indicates a skipped position.
e Press EXIT and repeat steps 1 through 4 to set other
positions if necessary.
Each position has to be individually selected. To turn
Skip off, repeat the procedure for each position.
Skipped positions cannot be selected by P
or by the controls on the television but can still be
accessed by the number buttons on the remote
control.
21
U and Pu
SETTING UP YOUR TV
Pos. Channel Station
ATV Manual Tuning
1
2
3
4
6
7
8
C2
C7
S10
S40
C22
ABC1
ABC1
5
C25
C28
C30
DTV Manual Tuning - Antenna
WEAK
Signal Strength
Quality
Channel
GOOD
STRONGAVERAGE
67
Frequency
842.0 MHz
Bandwidth
Start Scan
8 MHz
Pos.New TypeName
ABC ONE
0 New Channels - Total 6
ABC TWO
ABC THREE
ABC NEWS 24
DTV Manual Tuning - Antenna
2
1
7
40
ABCi
51
English
Channels may be moved and saved to the position of your
Sorting positions
choice.
a Select ATV Manual Tuning from the System Setup
menu.
b With the list of channels showing, use B or b to
highlight the channel you want to move and press
c Use B or b to move through the list to your preferred
position. As you do so, the other channels will move
to make room.
d Press C to save your move.
Repeat as necessary and press EXIT.
DTV Manual Tuning
NOTE: This feature varies depending on the Ant/Cable In
setting.
Manual Tuning
This feature is available for service engineers or can be used for
c.
direct channel entr y if the multiplex channel is known.
a Select DTV Manual Tuning from the System Setup
menu and press OK.
b Enter the multiplex number using the number
buttons or use
down.
C or c to adjust the number up or
c Highlight Start Scan and press OK. The television will
automatically search for that multiplex.
When the multiplex is found, any channels that are
not currently in the channel list will be added and the
channel information at the top of the screen will be
updated.
d Repeat as necessary. Press EXIT to finish.
22
SETTING UP YOUR TV
DTV Settings
Channels
Parental PIN Setup
Subtitle and Audio
Parental Control
Local Time Setting
Standby Channel Update
Common Interface
ABC ONE
Pos. Name
English
Manual Tuning for DVB-C
When Ant/Cable In is set to Cable, DTV Manual Tuning
items are as follows:
Frequency – input a specific frequency to be scanned
Modulation – choose from one of five QAM modulation
options
Symbol Rate – input a specific baud rate (KS/s) to be used for
the manual scan
DTV Settings
Channels
The channel order may be changed to suit your personal
a Select DTV Settings from the System Setup menu
and press OK.
b Select Channels and press OK.
c For your convenience, you can jump to specific places
in the list by one of two methods.
Channels Antenna TV
Line No. 1/10
Pos. Name
1ABC ONE
2 ABC TWO
7 ABC THREE
30 CABC Channel
40 ABC NEWS 24
51 ABCi
822 AA
823 AC
preference.
Line Number Jump —Use the number buttons
(0-9) to input the line number you want to select and
press OK.
It is also possible to change the Position number of a
particular channel.
Renumber —Press the RED button to renumber
the highlighted channel. Edit the channel number
using the number buttons and press OK. If the
position number you input already exists, a
confirmation window will appear.
23
SETTING UP YOUR TV
Channels Antenna TV
1 ABC ONE
2 ABC TWO
Pos. Name
7 ABC THREE
30 CABC Channel
40 ABC NEWS 24
51 ABCi
822 AA
823 AC
Line No. 1/10
Your existing channel order will be lost. Do you
wish to continue?
Yes
English
Move feature. Press the
channel you wish to move and press OK to check.
If you wish to move multiple channels at once, select
another channel and check in the same way. Repeat
as necessary.
Once all desired channels have been checked, press
the
B or b buttons to place the focus at the position
to which you wish to move the channels. The
channels will be inserted above the highlighted
channel. Press the GREEN button to execute the
move.
B or b buttons to select the
This is a digital tel evisi on whic h is in tegrat ed to al low th e use
of both digital and analogue services. However, during the
lifetime of this set it is very likely that analogue services will
be switched off to allow for more new digital services.
This ‘switch-off’ will happen in a number of phases, which will
be adve rti sed in y our a rea wel l in adva nce . It is r ecom men ded
that at each phase the television is re-tuned to ensure that
existing and new digital services can be viewed without
disruption.
Move — Press the GREEN button to activate the
Analogue switch-off
Position No. Sort — Press the YELLOW button. A
confirmation window will appear. Press
select Yes and press OK.
C or c to
Standby Channel Update
If the Standby Channel Update is set to On, when the TV is in
standby mode, Digital Tuning is automatically executed and any
new channels are saved.
a Select DTV Settings from the System Setup menu
and press OK.
b Press b to select Standby Channel Update and
press
C or c to select On.
Location setting
You can select either Home or Store mode. Home is
recommended for normal home use. Select Store when using
a Select Location from the System Setup menu.
b Press C or c to select Home or Store.
the television for displaying in a shop, etc.
24
CONTROLS AND FEATURES
Quick Menu
Picture Size
Picture Mode AutoView
Super Live
Sleep Timer
More Information
Channel Options
Wireless Information
Headphone Level
50
00:00
Speakers
TV Speakers
English
General controls
Quick Menu
Quick Menu helps you access some options quickly, such as
Picture Mode, Picture Size, More Information, Sleep Timer
etc.
Press QUICK to display the Quick Menu and use
select the option.
NOTE: Quick Menu items are different depending on the
current mode.
Quick menu item example
Mode Quick menu item Description
When viewing a TV
programme or
pictures from the
external input
When using EPG Genre Colour See page 60.
USB Media Player
(Photo Single View,
Slide Show)
Picture Mode See page 30.
Picture Size See page 28.
More Information See page 59.
Channel Options See page 62.
Sleep Timer See page 57.
Speakers See page 68.
Headphone Level See page 27.
Wireless Information See page 35.
Picture See page 30.
Sound See page 26.
Interval Time See page 51.
Repeat See page 51.
Background Music See page 51.
Play List See page 52.
Sleep Timer See page 57.
Speakers See page 68.
Headphone Level See page 27.
B or b to
Selecting channels
To select a channel, use the numbered buttons on the remote
control.
Channels can also be selected using P
To display on-screen information such as channel, input mode
or stereo/mono signal, press . Press again to cancel.
U and Pu.
The Time Display – analogue only
The time display facility allows the current (text service) time to
Press
to see the time display from the broadcaster. It will remain on
screen for about 5 seconds.
NOTE: This display may not be available in some cases.
be seen on the television screen.
D whilst watching a normal television broadcast
Stereo and Bilingual transmissions
For DTV programmes
For ste reo or d ual m ono bro adc asts , pr ess s and use C or
c to select settings.
Mode Display Pressing c
Stereo Stereo S Left S Right
Dual mono Dual 1
Mono –
Multichannel –
For multi-audio track broadcasts, press
change the audio language (see “Audio languages” on page 63).
For ATV programmes
If stereo or dual language broadcasts are transmitted, the
word Stereo or Dual will appear on the screen each time
channels are changed, disappearing after a few seconds. If the
broadcast is not in stereo, the word Mono will appear.
Stereo… Press
Bilingual… Bilingual transmissions are rare. If they are
transmitted, the word Dual will be displayed. Choose the
required programme number, and if the word Dual appears,
press
s to select Stereo or Mono.
s to select Dual 1, Dual 2 or Mono.
S Dual 2 S Dual
s repeatedly to
25
Loading...