Toshiba Uninterruptible Power System(UPS) G9 Series, RAS-S10CX, RAS-5115CX, RAS-10CX, RAC-S10CX Brochure & Specs

ADJUSTABLE SPEED DRIVES

G9 Series

POWERFUL...

TOSHIBA G9

POWERFUL... ADVANCED... VERSATILE...

The G9 adjustable speed drive is
the most advanced severe duty
drive ever offered by Toshiba. It is
a blend of a robust power platform
and a state-of-the-art control
scheme. With its 115% continuous
overload rating and its dual
32-bit processor controls, the G9
provides the ability to operate the
toughest of applications while
still maintaining a high level of
control.

POWERFUL

The G9 drive has the highest
overload capability available. It is
rated at 115% continuous current, 150% up to 120 seconds, and 280% instantaneous
current. The Motor-Over-Flux-Braking Technology allows the G9 to provide as much as
25% of its rated power for use in stopping a heavy or high inertia load without dynamic
braking resistors.

The G9 can operate in open or closed loop controls. Toshiba’s advanced vector control
algorithm offers speed regulation of 0.1% sensorless and 0.01% with motor or process

feedback. The G9 has the ability to switch on-the-y between speed, torque, or position

control modes. In feedback vector control mode, the G9 generates motor breakdown

torque to hold the commanded position even while the equipment is stopped.

G9 Family

ADVANCED...

ADVANCED

The G9’s removable LCD display allows the user to transfer parameter settings from one

drive to another. The encoder allows for quick access to a multitude of parameters and

monitoring information. The wide range of monitoring information makes troubleshooting
applications and start-up a snap. With the real-time clock fault recording ability, the user
can access up to 20 of the previous fault codes.

Toshiba’s “My Function” allows the user to access built-in PLC type logic. This allows
basic logic function programming of the drive without the use of a PLC.

Speed Search detects the direction and speed of a coasting motor. By matching the ASD
output to the direction and speed of the motor, the G9 smoothly restarts the motor and
accelerates to the commanded speed. This feature allows for switching between across­the-line power and ASD power without the added expense of brakes, timers, or other
stopping methods.

G9 LCD Display

VERSATILE...

VERSATILE

The built-in Proportional/Integral/Derivative (PID) control loop provides regulation of
processes without the need for external devices. Deviation limits, online switching, and delay

ltering functions are included to enhance the exibility and the reliability of PID process
control. The G9 also provides torque control and drooping control functions to allow precise
matching of motor torque for load sharing applications.

Toshiba’s G9 provides users with the most adaptable interface in the industry. With eight

congurable discrete inputs that can be set to 67 different functions, each discrete input

can provide normally open or normally closed operation, and its three multi-function analog
inputs have independently adjustable bias and gain.

The G9 drive has an array of stackable option boards
available. These boards allow the user to communicate
with almost any system. These options include Devicenet,

Probus, Modbus, 120 V discrete, and many others.

Designed with the End User in Mind

The G9 has been designed with needs of the end user
in mind. Toshiba provides Windows® programming
software at no additional cost, making set up and
documentation easy. Features such as NEC 2005 motor
overload retention (no external motor overloads required),
UL Type-1 out-of-the-box, integrated input fuses and
DC link (20 HP and larger), and the DBR transistor as
a standard item make it easy to add dynamic braking
resistors to maximize regeneration capabilities while in

the eld. Toshiba is setting a new industry standard by
providing isolated inputs out-of-the-box without requiring

any additional hardware.

G9 Assembly Unit

G9 Drive

G9 Specications

Model Range 1 to 150 HP 1 to 350 HP

Voltage Rating 200 to 240 V 380 to 480 V

Input Voltage Tolerance

Voltage Regulation Main Circuit Voltage Feedback Control (Automatic Regulation, ‘Fixed’ and ‘Control Off’ Selections)

PWM Carrier Frequency

Control System

V/f Pattern

Overload Current Rating 115% Continuous, 150% for Two Minutes up to 100 HP, Consult Factory for Ratings Above 100 HP

Frequency Setting

Frequency Precision

Output Frequency Range 0 to 299 Hz

Speed Regulation Closed Loop (Up to 0.01%, 1000:1 Speed Range), Open Loop (Up to 0.1%, 60:1 Speed Range)

Discrete Input Terminals

Analog Inputs

Discrete Output Contacts Three Output Contacts Programmable to 127 Functions

Analog Outputs One Programmable 4 to 20 mA or 0 to 10 V and One 4 to 20 mA Output

Control Board Communication Ports 2-Wire/4-Wire RS485

Power Terminals Input (L1, L2, L3); Output (T1, T2, T3); DCL(PO,PA); DBR (PA,PB); DC BUS (PA, PC)

PID (Set Point Control)

Retry ASD can clear some faults upon trip automatically.

Restart ASD will catch a coasting motor smoothly.

Ambient

Installation NEMA 1 Enclosure Type

Adjustable 0.5 to 15 kHz (ASD Specic, Consult Factory)

Sine Wave PWM System - Flux eld current vector control

Open Loop Vector, Closed Loop Vector, Constant Torque, Variable Torque, Auto Torque Boost, Manual Torque Boost,
5-Point V/f Custom Curve Setting

Rotary Encoder Integrated into EOI, 0 to 10 V,

Analog Input

Eight Discrete Input Terminals Programmable to 67 Functions; Number of Terminals may be Increased Using Optional
Hardware

One 4 to 20 mA, One 0 to 10 V, and One

Proportional Gain, Integral Gain, Feedback Settings Upper/Lower Deviation Limits, Feedback Source Delay Filter,
Feedback Settings Differential Gain

Operating Temperature: -10 to +40

±0.2% of the Maximum Output Frequency, Digital Input ±0.01% of the Maximum Output Frequency

±10% ±10%

±10 V, 4 to 20 mA, Binary Input, Motorized Potentiometer Input

±10 V

°C; 14 to 104°F Humidity: 95% Non-Condensing

Electronic Operation Interface (EOI)

LCD EOI (Liquid Crystal Display/
Electronic Operator Interface)

LED EOI Light Emitting Diode; Seven Segment Display

LED Indicators Run (Red)/Stop (Green), Local/Remote (Green), DC Bus Charge Indicator (Red)

Keys Local/Remote, ESC, Run, Mode, Stop/Reset

Rotary Encoder Encoder with Integrated Enter Key for Frequency and Parameter Adjustments

Monitoring

Selectable Display Units

EOI Communications Ports RS232/485 ports standard

Full English Back-Lit Display

Main Display Shows Two Monitored Items or can Display up to 17 User-Selected Scrolling Items Including: Output
Frequency, Output Current, Output Voltage, Input Power, Output Power, Motor Overload Ratio, DC Bus Voltage,
Compensation Frequency, PID Feedback, AM Output, FM Output, Motor Load, ASD Load, Run Time

Completely Congurable along with Scaling Factor Multiple; Current Display Selectable Between Amps or %; Voltage

Display Selectable Between Volts or %

G9 Dimensions

230 V 0.75 to 2 HP 3 to 5 HP 7.5 HP 10 HP 15 to 20 HP 25 to 30 HP NA 40 to 60 HP NA 75 HP 100 HP NA NA NA NA

460 V 1 to 3 HP 5 HP 7.5 to 10 HP 15 HP 20 to 25 HP 30 HP 40 to 50 HP

Height

Width

Depth

11.2 12.4 15 15.1 19.3 25.9 30.8 33.1 36.1 51.7 53.1 53.2 63.1 68.5 70

(in.)

(in.)

(in.)

5.2 6.1 6.9 8.3 9.1 11.1 11.1 14.3 14.3 14.6 14.8 15.7 15 18.9 25.6

6.1 6.6 6.6 7.6 7.6 13.2 14.3 15 15.3 17.6 17.6 17.6 17.6 17.6 17.6

NA 60 to 100 HP 125 HP NA 150 HP 200 HP 250 HP 300 to 350 HP

North American Headquarters & Manufacturing Facility (Houston, TX)

TOSHIBA — Quality by Design

Toshiba's culture and history are strongly rooted in quality. Our designs are
technologically innovative, and our products are manufactured from start to
end using only the highest quality domestic and foreign parts.

Medium Voltage Motor

G7 Drive

Product Warranty

Toshiba offers a comprehensive warranty program on its full line of industrial
products. Consult your salesperson or the factory for specific information.

Need to Know More?

Be sure to visit our website located at www.toshiba.com/ind for the latest
information on Toshiba products and services.

Customer Support Services

Toshiba offers 24-hour service nationwide. For assistance of any type
call: 1-800-231-1412.

ADJUSTABLE SPEED DRIVES MOTORS CONTROLS UPS INSTRUMENTATION PLC

INDUSTRIAL DIVISION

13131 West Little York Road, Houston, Texas 77041
Tel [phone] Fax [phone]
US 800/231-1412 Canada 800/872-2192 Mexico 01/800/527-1204
www.toshiba.com/ind
Copyright 6/2007

Available Through:

*ASDG9broct070618*