Toshiba PSU4RU011006, PSU4RU, PSU4SU00S002, PSU4SU User Manual

Satellite®/Satellite Pro® U800 Series User’s Guide

If you need assistance:
Technical support is available online at Toshiba’s Web site at

support.toshiba.com. At this Web site, you will find answers for

many commonly asked technical questions plus many
downloadable software drivers, BIOS updates, and other
downloads.

For more information, see “If Something Goes Wrong” on

page 117 in this guide.

GMAD00304011
05/12

2

Handling the cord on this product will expose you to lead, a
chemical known to the State of California to cause birth defects or
other reproductive harm. Wash hands after handling.

Model: Satellite®/Satellite Pro® U800 Series

Recordable and/or ReWritable Drive(s) and
Associated Software Warranty

The computer system you purchased may include Recordable and/or
ReWritable optical disc drive(s) and associated software, among the most
advanced data storage technologies available. As with any new technology,
you must read and follow all set-up and usage instructions in the applicable
user guides and/or manuals enclosed or provided electronically. If you fail
to do so, this product may not function properly and you may lose data or
suffer other damage. TOSHIBA AMERICA INFORMATION SYSTEMS,
INC. (“TOSHIBA”), ITS AFFILIATES AND SUPPLIERS DO NOT
WARRANT THAT OPERATION OF THE PRODUCT WILL BE
UNINTERRUPTED OR ERROR FREE. YOU AGREE THAT TOSHIBA,
ITS AFFILIATES AND SUPPLIERS SHALL HAVE NO
RESPONSIBILITY FOR DAMAGE TO OR LOSS OF ANY BUSINESS,
PROFITS, PROGRAMS, DATA, NETWORK SYSTEMS OR
REMOVABLE STORAGE MEDIA ARISING OUT OF OR RESULTING
FROM THE USE OF THE PRODUCT, EVEN IF ADVISED OF THE
POSSIBILITY THEREOF.

Protection of Stored Data

For your important data, please make periodic back-up copies of all the data
stored on the hard disk or other storage devices as a precaution against possible
failures, alteration, or loss of the data. IF YOUR DATA IS ALTERED OR

LOST DUE TO ANY TROUBLE, FAILURE OR MALFUNCTION OF
THE HARD DISK DRIVE OR OTHER STORAGE DEVICES AND THE
DATA CANNOT BE RECOVERED, TOSHIBA SHALL NOT BE
LIABLE FOR ANY DAMAGE OR LOSS OF DATA, OR ANY OTHER
DAMAGE RESULTING THEREFROM. WHEN COPYING OR
TRANSFERRING YOUR DATA, PLEASE BE SURE TO CONFIRM
WHETHER THE DATA HAS BEEN SUCCESSFULLY COPIED OR
TRANSFERRED. TOSHIBA DISCLAIMS ANY LIABILITY FOR THE
FAILURE TO COPY OR TRANSFER THE DATA CORRECTLY.

Critical Applications

The computer you have purchased is not designed for any “critical applications.”
“Critical applications” means life support systems, medical applications,
connections to implanted medical devices, commercial transportation, nuclear
facilities or systems or any other applications where product failure could lead to
injury to persons or loss of life or catastrophic property damage.

ACCORDINGLY, TOSHIBA, ITS AFFILIATES AND SUPPLIERS
DISCLAIM ANY AND ALL LIABILITY ARISING OUT OF THE USE
OF THE COMPUTER PRODUCTS IN ANY CRITICAL
APPLICATIONS. IF YOU USE THE COMPUTER PRODUCTS IN A
CRITICAL APPLICATION, YOU, AND NOT TOSHIBA, ASSUME
FULL RESPONSIBILITY FOR SUCH USE.

FCC Notice “Declaration of Conformity Information”

This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation.

This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, it may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:

❖ Reorient or relocate the receiving antenna.
❖ Increase the separation between the equipment and receiver.
❖ Connect the equipment to an outlet on a circuit different from that to which

the receiver is connected.

❖ Consult the dealer or an experienced radio/TV technician for help.

3

NOTE

Only Peripherals complying with the FCC Class B limits may be attached to this
equipment. Operation with noncompliant peripherals or peripherals not
recommended by Toshiba is likely to result in interference to radio and TV reception.
Shielded cables must be used between the external devices and the computer's
ports. Changes or modifications made to this equipment not expressly approved by
Toshiba or parties authorized by Toshiba could void the user's authority to operate
the equipment.

4

This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:

❖ This device may not cause harmful interference.
❖ This device must accept any interference received, including interference

that may cause undesired operation.

Contact Toshiba’s Support Web site at support.toshiba.com.

Industry Canada Requirement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conformé à la norme NMB-003 du
Canada.

Wireless Interoperability

The TOSHIBA Wireless LAN Mini PCI Card products are designed to be
interoperable with any wireless LAN product that is based on Direct Sequence
Spread Spectrum (DSSS) radio technology, and is compliant to:

❖ The IEEE 802.11 Standard on Wireless LANs (Revision A/B/G), as defined

and approved by the Institute of Electrical and Electronics Engineers.

❖ The Wireless Fidelity (Wi-Fi

The “Wi-Fi CERTIFIED” logo is a certification mark of the Wi-Fi Alliance.

®

) certification as defined by the Wi-Fi Alliance.

Bluetooth® and Wireless LAN devices operate within the same radio

frequency range and may interfere with one another. If you use Bluetooth and
Wireless LAN devices simultaneously, you may occasionally experience a
less than optimal network performance or even lose your network
connection.

If you should experience any such problem, immediately turn off your
Bluetooth or Wireless LAN device.

Please contact Toshiba computer product support on Web site
http://www.toshiba-europe.com/computers/tnt/bluetooth.htm in Europe or
support.toshiba.com in the United States for more information.

5

Radio Frequency Interference Requirements

This device is restricted to indoor use due to its operation in the 5.15 GHz to

5.25 GHz frequency range. FCC requires this product to be used indoors for
frequency range 5.15 GHz to 5.25 GHz to reduce the potential for harmful
interference to co-channel Mobile Satellite systems.

High power radars are allocated as primary users of the 5.25 GHz to 5.35
GHz and 5.65 GHz to 5.85 GHz bands. These radar stations can cause
interference with and/or damage this device.

NOTE

The above caution applies to products that operate with an 802.11a radio
device.

Wireless LAN and Your Health

Wireless LAN products, like other radio devices, emit radio frequency
electromagnetic energy. The level of energy emitted by Wireless LAN devices
however is far much less than the electromagnetic energy emitted by wireless
devices like for example mobile phones.

Because Wireless LAN products operate within the guidelines found in radio
frequency safety standards and recommendations, TOSHIBA believes Wireless
LAN is safe for use by consumers. These standards and recommendations reflect
the consensus of the scientific community and result from deliberations of panels
and committees of scientists who continually review and interpret the extensive
research literature.

In some situations or environments, the use of Wireless LAN may be restricted
by the proprietor of the building or responsible representatives of the
organization. These situations may for example include:

❖ Using the Wireless LAN equipment on board airplanes, or
❖ In any other environment where the risk of interference to other devices or

services is perceived or identified as harmful.

If you are uncertain of the policy that applies on the use of wireless devices in a
specific organization or environment (e.g. airports), you are encouraged to ask for
authorization to use the Wireless LAN device prior to turning on the equipment.

6

Exposure to Radio Frequency Radiation

The radiated output power of the TOSHIBA Wireless LAN Mini PCI Card is
far below the FCC radio frequency exposure limits. Nevertheless, the
TOSHIBA Wireless LAN Mini PCI Card shall be used in such a manner that
the potential for human contact during normal operation is minimized. The
antenna(s) used for this transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.

Canada – Industry Canada (IC)

This device complies with RSS 210 of Industry Canada.

The installer of this radio equipment must ensure that the antenna is located
or pointed such that it does not emit RF field in excess of Health Canada
limits for the general population; consult Safety Code 6, obtainable from
Health Canada’s Web site www.hc-sc.gc.ca/rpb. The RF device shall not be
co-located with any other transmitter that has not been tested with this
device.

Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of this device.

L’ utilisation de ce dispositif est soumis aux deux conditions suivantes: (1) il ne
doit pas produire de brouillage et (2) l’utilisateur du dispositif doit être prêt à
accepter tout brouillage radioélectrique reçu, même s’il est susceptible de
compromettre son fonctionnement.

The term “IC” before the equipment certification number only signifies that the
Industry Canada technical specifications were met.

To prevent radio interference to the licensed service, this device is intended to be
operated indoors and away from windows to provide maximum shielding.
Equipment (or its transmit antenna) that is installed outdoors is subject to
licensing.

Pour empecher que cet appareil cause du brouillage au service faisant l’objet
d’une licence, il doit etre utilize a l’interieur et devrait etre place loin des fenetres
afin de Fournier un ecram de blindage maximal. Si le matriel (ou son antenne
d’emission) est installe a l’exterieur, il doit faire l’objet d’une licence.

7

This device is restricted to indoor use due to its operation in the 5.15 GHz to

5.25 GHz frequency range. Industry Canada requires this product to be used
indoors for frequency range 5.15 GHz to 5.25 GHz to reduce the potential for
harmful interference to co-channel Mobile Satellite systems.

High power radars are allocated as primary users of the 5.25 GHz to 5.35
GHz and 5.65 GHz to 5.85 GHz bands. These radar stations can cause
interference with and/or damage this device.

NOTE

The above caution applies to products that operate with an 802.11a radio
device.

EU Declaration of Conformity

TOSHIBA declares that this product conforms to the following Standards:

Supplementary
Information:

This product is carrying the CE-Mark in accordance with the related European
Directives. The party responsible for CE-Marking is TOSHIBA Europe GmbH,
Hammfelddamm 8, 41460 Neuss, Germany.

*The product complies with the
requirements of the Low Voltage
Directive 73/23/EEC, the EMC Directive
89/336/EEC and/or the R&TTE Directive
1999/5/EC.

The European Union WEEE (Waste from Electrical and
Electronic Equipment) Directive Information

The European Union WEEE (Waste from Electrical and Electronic Equipment)
Directive is intended to protect the quality of the environment and human health
through the responsible use of natural resources and the adoption of waste
management strategies that focus on recycling and reuse. This Directive requires
producers of electrical and electronic products put on the market in European
Union (EU) member countries after August 2005 to mark such products with a
crossed-out wheeled bin with a black bar symbol. If the product’s battery or
accumulator contains more than the specified values of lead (Pb), mercury (Hg),
and/or cadmium (Cd) defined in the Battery Directive (2006/66/EC), then the

8

Pb, Hg, Cd

chemical symbols for lead (Pb), mercury (Hg) and/or cadmium (Cd) will appear
below the crossed out wheeled bin symbol on the battery.

In the European Union, these symbols indicate that when the last end user wishes
to discard this product, it must be sent to appropriate facilities for recovery and
recycling. This Directive applies to EU member countries only and does not
apply to end users in other countries such as the United States.

Although the initial emphasis is in Europe, Toshiba is already working with
design engineers, suppliers, and other partners to determine appropriate
worldwide product life cycle planning and end-of-life strategies for our products.
Please contact your local government for applicable laws and regulations
governing the disposal of this product. For information on how to trade-in or
recycle your product, visit www.reuse.toshiba.com.

VCCI Class B Information

Taiwa n

Article 14 Unless approved, for any model accredited low power radio frequency

electric machinery, any company, trader or user shall not change the
frequency, increase the power or change the features and functions of the
original design.

Article 17 Any use of low power radio frequency electric machinery shall not affect

aviation safety and interfere with legal communications. In the event
interference is caused, the use of such electric machinery shall be
immediately discontinued. Operation of such products can be resumed
only when they are modified and can no longer cause interference.

The legal communications mentioned in the above item refer to radio
communications operated in accordance with telecommunication laws and
regulations.

Low power radio frequency electric machinery shall resist against interference

2.4DSOF4

(1) (2)

(3)

from legal communications or from industrial, scientific and medical radio
emission electric machinery.

Using this Equipment in Japan

In Japan, the frequency bandwidth of 2,400 MHz to 2,483.5 MHz for second
generation low-power data communication systems such as this equipment
overlaps that of mobile object identification systems (premises radio station and
specified low-power radio station).

1. Sticker
Please put the following sticker on devices incorporating this product.

The frequency bandwidth of this equipment may operate within the
same range as industrial devices, scientific devices, medical
devices, microwave ovens, licensed radio stations and non-licensed
specified low-power radio stations for mobile object identification
systems (RFID) used in factory product lines (Other Radio Stations).

1. Before using this equipment, ensure that it does not interfere with
any of the equipment listed above.

2. If this equipment causes RF interference to other radio stations,
promptly change the frequency being used, change the location
of use, or turn off the source of emissions.

3. Contact TOSHIBA Direct PC if you have problems with interference
caused by this product to Other Radio Stations.

2. Indication
The indication shown below appears on this equipment.

9

(4)

1 2.4: This equipment uses a frequency of 2.4 GHz.
2 DS: This equipment uses DS-SS modulation.

OF: This equipment uses OFDM modulation.

3 The interference range of this equipment is less than 40m.
4 This equipment uses a frequency bandwidth from

2,400 MHz to 2,483.5 MHz.
It is possible to avoid the band of mobile object identification systems.

10

2.4FH1

(3)

(4)

The indication shown below appears on this equipment.

(1) (2)

1 2.4: This equipment uses a frequency of 2.4 GHz.
2 FH: This equipment uses FH-SS modulation.
3 The interference range of this equipment is less than 10m.
4 This equipment uses a frequency bandwidth from 2,400 MHz to

2,483.5 MHz.

3. TOSHIBA Direct PC
Monday – Friday: 10:00 – 17:00
Toll Free Tel: [phone]
Direct Dial: 03-3457-4850
Fax: [phone]

Device Authorization

This device obtains the Technical Regulation Conformity Certification and
the Technical Conditions Compliance Approval, and it belongs to the
device class of radio equipment of low-power data communication system
radio station stipulated in the Radio Law and the Telecommunications
Business Law of Japan.

België/
Belgique:

Europe - Restrictions for use of 2.4 GHz Frequencies in
European Community Countries

For private usage outside buildings across public grounds over less than
300m no special registration with IBPT/BIPT is required. Registration to
IBPT/BIPT is required for private usage outside buildings across public
grounds over more than 300m. For registration and license please
contact IBPT/BIPT.

Voor privé-gebruik buiten gebouw over publieke groud over afstand
kleiner dan 300m geen registratie bij BIPT/IBPT nodig; voor gebruik
over afstand groter dan 300m is wel registratie bij BIPT/IBPT nodig.
Voor registratie of licentie kunt u contact opnemen met BIPT.

Dans le cas d’une utilisation privée, à l’extérieur d’un bâtiment, au­dessus d’un espace public, aucun enregistrement n’est nécessaire pour
une distance de moins de 300m. Pour une distance supérieure à 300m un
enregistrement auprès de l’IBPT est requise. Pour les enregistrements et
licences, veuillez contacter l’IBPT.

11

Deutschland: License required for outdoor installations. Check with reseller for

procedure to follow.
Anmeldung im Outdoor-Bereich notwendig, aber nicht

genehmigungspflichtig. Bitte mit Händler die Vorgehensweise
abstimmen.

France: Restricted frequency band: only channels 1 to 7 (2400 MHz and 2454

MHz respectively) may be used outdoors in France. Please contact
A.R.T. (http://www.art-telecom.fr) for applicable procedures to follow.

Bande de fréquence restreinte: seuls les canaux 1- 7 (2400 et 2454 MHz
respectivement) doivent être utilisés endroits extérieur en France. Vous
pouvez contacter l’Autorité de Régulation des Télécommunications
(http://www.art-telecom.fr) pour la procédure à suivre.

Italia: License required for indoor use. Use with outdoor installations not

allowed.
È necessaria la concessione ministeriale anche per l’uso interno.

Verificare con i rivenditori la procedura da seguire.

Nederland: License required for outdoor installations. Check with reseller for

procedure to follow.
Licentie verplicht voor gebruik met buitenantennes. Neem contact op

met verkoper voor juiste procedure.

Europe - Restrictions for Use of 5 GHz Frequencies in
European Community Countries

European Community
Countries

Austria O x x
Belgium, France,

Switzerland/Liechtenstein
Denmark, Finland,

Germany, Greece,
Ireland, Italy,
Luxembourg,
Netherlands, Norway,
Portugal, Sweden, UK

Iceland, Spain O O O

O: allowed x: forbidden

5150-5250 MHz

Channels: 36, 40, 44,

48

Indoor Only

OO x

OO O

5250-5350 MHz

Channels: 52, 56, 60,

64

Indoor Only

5470-5725 MHz

Channels: 100, 104, 108, 112,

116, 120, 124, 128, 132, 136, 140

Indoor/Outdoor

❖ To remain in conformance with European spectrum usage laws for Wireless

LAN operation, the above 2.4 GHz and 5 GHz channel limitations apply.
The user should use the wireless LAN utility to check the current channel of

12

operation. If operation is occurring outside of the allowable frequencies as
listed above, the user must cease operating the Wireless LAN at that
location and consult the local technical support staff responsible for the
wireless network.

❖ The 5 GHz Turbo mode feature is not allowed for operation in any

European Community country.

❖ This device must not be operated in ad-hoc mode using channels in the

5 GHz bands in the European Community. Ad-hoc mode provides a direct
communication between two client devices without a Wireless LAN Access
Point.

❖ This device must be used with Access Points that have employed and

activated a radar detection feature required for European Community
operation in the 5 GHz bands. This device will operate under the control of
the Access Point in order to avoid operating on a channel occupied by any
radar system in the area. The presence of nearby radar operation may result
in temporary interruption of operation of this device. The Access Point’s
radar detection feature will automatically restart operation on a channel free
of radar. You may consult with the local technical support staff responsible
for the wireless network to ensure the Access Point device(s) are properly
configured for European Community operation.

Bluetooth® Wireless Technology Interoperability

Bluetooth® Cards from TOSHIBA are designed to be interoperable with any

product with Bluetooth wireless technology that is based on Frequency Hopping
Spread Spectrum (FHSS) radio technology, and is compliant to:

❖ Bluetooth Specification as defined and approved by The Bluetooth Special

Interest Group.

❖ Logo certification with Bluetooth wireless technology as defined by The

Bluetooth Special Interest Group.

Always use Bluetooth cards from TOSHIBA in order to enable wireless
networks over two or more (up to a total of seven) TOSHIBA portable
computers using these cards. Please contact TOSHIBA computer product
support on Web site http://www.toshiba-europe.com/computers/tnt/
bluetooth.htm in Europe or support.toshiba.com in the United States for
more information.

When you use Bluetooth cards from TOSHIBA close to 2.4 GHz Wireless
LAN devices, Bluetooth transmissions might slow down or cause errors. If
you detect certain interference while you use Bluetooth cards from TOSHIBA,
always change the frequency, move your computer to the area outside of the
interference range of 2.4 GHz Wireless LAN devices (40 meters/43.74 yards
or more) or stop transmitting from your computer. Please contact TOSHIBA
computer product support on Web site http://www.toshiba-europe.com/

computers/tnt/bluetooth.htm in Europe or support.toshiba.com in the United
States for more information.

Bluetooth and Wireless LAN devices operate within the same radio frequency
range and may interfere with one another. If you use Bluetooth and Wireless
LAN devices simultaneously, you may occasionally experience a less than
optimal network performance or even lose your network connection. If you
should experience any such problem, immediately turn off either one of your
Bluetooth or Wireless LAN. Please contact Toshiba computer product
support on Web site http://www.toshiba-europe.com/computers/tnt/
bluetooth.htm in Europe or support.toshiba.com in the United States for
more information.

Bluetooth® Wireless Technology and Your Health

The products with Bluetooth® wireless technology, like other radio devices, emit
radio frequency electromagnetic energy. The level of energy emitted by devices
with Bluetooth wireless technology however is much less than the
electromagnetic energy emitted by wireless devices such as mobile phones.

Because products with Bluetooth wireless technology operate within the
guidelines found in radio frequency safety standards and recommendations,
TOSHIBA believes Bluetooth wireless technology is safe for use by consumers.
These standards and recommendations reflect the consensus of the scientific
community and result from deliberations of panels and committees of scientists
who continually review and interpret the extensive research literature.

In some situations or environments, the use of Bluetooth wireless technology
may be restricted by the proprietor of the building or responsible representatives
of the organization. These situations may for example include:

❖ Using the equipment with Bluetooth wireless technology on board

airplanes, or

❖ In any other environment where the risk of interference to other devices or

services is perceived or identified as harmful.

If you are uncertain of the policy that applies on the use of wireless devices in a
specific organization or environment (e.g. airports), you are encouraged to ask for
authorization to use the device with Bluetooth wireless technology prior to
turning on the equipment.

13

Exposure to Radio Frequency Radiation

The radiated output power of the Bluetooth Card from TOSHIBA is far below
the FCC radio frequency exposure limits. Nevertheless, the Bluetooth Card
from TOSHIBA shall be used in such a manner that the potential for human
contact during normal operation is minimized.

14

Regulatory statements

This product complies with any mandatory product specification in any country/
region where the product is sold. In addition, the product complies with the
following:

European Union (EU) and EFTA

This equipment complies with the R&TTE directive 1999/5/EC and has been
provided with the CE mark accordingly.

Canada — Industry Canada (IC)

This device complies with RSS 210 of Industry Canada.

Taiwa n

Article 14 Unless approved, for any model accredited low power radio frequency

electric machinery, any company, trader or user shall not change the
frequency, increase the power or change the features and functions of the
original design.

Article 17 Any use of low power radio frequency electric machinery shall not affect

aviation safety and interfere with legal communications. In the event
interference is caused, the use of such electric machinery shall be
immediately discontinued. Operation of such products can be resumed
only when they are modified and can no longer cause interference.

The legal communications mentioned in the above item refer to radio
communications operated in accordance with telecommunication laws and
regulations.

Low power radio frequency electric machinery shall resist against interference
from legal communications or from industrial, scientific and medical radio
emission electric machinery.

Copyright

This guide is copyrighted by Toshiba America Information Systems, Inc. with all
rights reserved. Under the copyright laws, this guide cannot be reproduced in any
form without the prior written permission of Toshiba. No patent liability is
assumed, however, with respect to the use of the information contained herein.

©2012 by Toshiba America Information Systems, Inc. All rights reserved.

Export Administration Regulation

This document contains technical data that may be controlled under the U.S.
Export Administration Regulations, and may be subject to the approval of the
U.S. Department of Commerce prior to export. Any export, directly or indirectly,
in contravention of the U.S. Export Administration Regulations is prohibited.

Notice

The information contained in this manual, including but not limited to any
product specifications, is subject to change without notice.

TOSHIBA CORPORATION AND TOSHIBA AMERICA
INFORMATION SYSTEMS, INC. (TOSHIBA) PROVIDES NO
WARRANTY WITH REGARD TO THIS MANUAL OR ANY
OTHER INFORMATION CONTAINED HEREIN AND HEREBY
EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR
PURPOSE WITH REGARD TO ANY OF THE FOREGOING.
TOSHIBA ASSUMES NO LIABILITY FOR ANY DAMAGES
INCURRED DIRECTLY OR INDIRECTLY FROM ANY
TECHNICAL OR TYPOGRAPHICAL ERRORS OR OMISSIONS
CONTAINED HEREIN OR FOR DISCREPANCIES BETWEEN
THE PRODUCT AND THE MANUAL. IN NO EVENT SHALL
TOSHIBA BE LIABLE FOR ANY INCIDENTAL,
CONSEQUENTIAL, SPECIAL, OR EXEMPLARY DAMAGES,
WHETHER BASED ON TORT, CONTRACT OR OTHERWISE,
ARISING OUT OF OR IN CONNECTION WITH THIS MANUAL
OR ANY OTHER INFORMATION CONTAINED HEREIN OR THE
USE THEREOF.

15

Trademarks

Satellite, Satellite Pro, and eco Utility are either registered trademarks or
trademarks of Toshiba America Information Systems Inc. and/or Toshiba
Corporation.

Adobe and Photoshop are either registered trademarks or trademarks of Adobe
Systems Incorporated in the United States and/or other countries.

Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any
use of such marks by Toshiba is under license. Other trademarks and trade names
are those of their respective owners.

HDMI, the HDMI Logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing, LLC.

Intel, Intel Core, Celeron, Centrino and Pentium are trademarks or registered
trademarks of Intel Corporation or its subsidiaries in the United States and other
countries.

16

Memory Stick and Memory Stick PRO are trademarks or registered trademarks
of Sony Corporation.

Microsoft, Outlook, Windows, and Windows Media are either registered
trademarks or trademarks of Microsoft Corporation in the United States and/or
other countries.

Secure Digital and SD are trademarks of SD Card Association.
Wi-Fi is a registered trademark of the Wi-Fi Alliance.

All other brand and product names are trademarks or registered trademarks of
their respective companies.

Licenses

This Product is licensed under the AVC, the VC-1 and the MPEG-4 Part 2 Visual
patent portfolio licenses for the personal and non-commercial use of a consumer
to (i) encode video in compliance with the above standards (“Video Standards”)
and/or (ii) decode AVC, VC-1 and MPEG-4 Part 2 Visual that was encoded by a
consumer engaged in personal and non-commercial activity or was obtained
from a video provider licensed to provide such video. None of the licenses extend
to any other product regardless of whether such product is included with this
product in a single article. No license is granted or shall be implied for any other
use. Additional information may be obtained from MPEG LA, LLC.
See www.mpegla.com.

Computer Recycling Information

As part of a commitment to people and the future, Toshiba promotes the efficient
use of resources by working to achieve our zero-waste-to-landfill goal at all our
production sites. In addition to our existing waste reduction and recycling
policies, Toshiba is strongly committed to reducing electronic waste. In order to
ensure efficient use of resources and appropriate treatment of hazardous
substances, in accordance with recycling regulations in each state, country, and
territory, Toshiba wants to make it easy for customers to recycle products at the
end of the life cycle. To learn more about Toshiba's sustainability commitment,
visit us.toshiba.com/green.

Reuse, Donation, Recycling

Functional computers can be donated to a local charity or resold easily through a
Toshiba-branded program.

Non working Toshiba computers can be mailed-back for free recycling.
For additional details, please visit us.toshiba.com/recycle.

Contents

Introduction................................................................................ 23

This guide ...............................................................25

Safety icons ............................................................26

Other icons used...............................................26

Your computer’s features and specifications......27

Other documentation ..............................................27

Service options .......................................................27

Chapter 1: Getting Started......................................................... 28

Selecting a place to work ........................................28

Setting up a work environment .........................28

Keeping yourself comfortable ...........................29

Computer user comfort recommendations .......29

Good Working Posture .....................................29

Using the notebook with an external keyboard,

mouse or monitor .......................................30

Typing style ......................................................31

Taking breaks and varying tasks .......................31

Mobile computing tips ......................................32

Transporting the notebook................................32

17

18

Contents

Seeking additional help .....................................32

Check list ..........................................................33

Precautions.......................................................33

Important information on your computer’s

cooling fan ..................................................35

Setting up your computer .......................................36

Connecting to a power source ................................36

Charging the main battery.......................................38

Using the computer for the first time......................39

Setting up your software...................................39

Registering your computer with Toshiba ................40

Adding optional external devices.............................40

Adding memory (optional)......................................40

Recovering the Internal Storage Drive ....................41

Recovering to out-of-box state (recommended

recovery method)........................................42

Recovering of factory default software with

user’s data ..................................................45

Recovering without changing the internal

storage drive partitions ...............................48

Recovering to a custom size partition...............50

Creating recovery media ...................................53

Restoring from recovery media.........................55

Erasing the Internal Storage Drive ..........................57

Checking the internal storage drive operating

status................................................................59

Installing drivers and applications.....................59

Using the touch pad................................................60

Adjusting touch pad settings ............................62

Disabling or enabling the touch pad..................63

Connecting an external device.................................63

Using external display devices ................................64

Selecting video cables.......................................64

Connecting an HDMI®-compatible television

or display device .........................................64

Contents

Directing the display output when you turn

on the computer .........................................65

Adjusting the quality of the external display......65

Customizing your computer’s settings....................66

Caring for your computer........................................66

Cleaning the computer......................................66

Moving the computer........................................66

Using a computer lock ......................................66

19

Chapter 2: Learning the Basics................................................. 68

Computing tips .......................................................68

Using the keyboard .................................................69

Character keys .................................................70

Function keys....................................................70

Special Windows® keys ...................................70

Backlit keyboard................................................70

Starting a program..................................................71

Starting a program using the Search

programs and files field ..............................71

Starting a program from the Start menu...........71

Saving your work....................................................72

Backing up your work .............................................72

Restoring your work .........................................73

Toshiba’s online resources .....................................73

Chapter 3: Mobile Computing................................................... 74

Toshiba’s energy-saver design................................74

Running the computer on battery power ................74

Battery Notice ...................................................74

Power management ..........................................75

Charging batteries...................................................76

Charging the main battery.................................76

Charging the RTC battery..................................77

Monitoring main battery power...............................77

Determining remaining battery power...............79

What to do when the main battery runs low .....79

20

Contents

Setting battery notifications ..............................79

Conserving battery power ................................80

Power Plans......................................................81

Using the TOSHIBA eco power plan........................82

Changing the main battery ......................................82

Taking care of your battery .....................................83

Safety precautions ..................................................83

Maintaining your battery ...................................84

Disposing of your computer ...................................84

Traveling tips ..........................................................85

Chapter 4: Exploring Your Computer’s Features..................... 86

Exploring the desktop .............................................86

Finding your way around the desktop ...............87

Setting up for communications...............................89

Connecting your computer to a network...........90

Exploring audio features .........................................90

Recording sounds.............................................90

Using external speakers or headphones............91

Using the Web Camera ...........................................92

Using the Memory card reader................................92

Inserting memory media...................................92

Removing memory media.................................93

Chapter 5: Utilities...................................................................... 94

TOSHIBA Assist ......................................................95

Connect.............................................................96

Secure...............................................................97

Protect & Fix .....................................................98

Optimize............................................................99

TOSHIBA Recovery Media Creator ........................100

TOSHIBA Application Installer...............................100

Setting passwords ................................................101

Using an instant password..............................102

Using a supervisor password..........................102

Using a user password ...................................104

Contents

Deleting a user password................................104

TOSHIBA Face Recognition Utility.........................105

TOSHIBA PC Diagnostic Tool Utility......................106

Mouse Utility ........................................................107

TOSHIBA Hardware Setup.....................................108

TOSHIBA Sleep Utility ...........................................110

Starting the TOSHIBA Sleep Utility..................110

USB Sleep and Charge ....................................110

Enabling/Disabling USB Sleep and Charge......112

Power supply mode settings...........................112

TOSHIBA Accessibility ..........................................113

TOSHIBA eco Utility™ ...........................................114

TOSHIBA Service Station ......................................115

TOSHIBA PC Health Monitor.................................115

21

Chapter 6: If Something Goes Wrong ................................... 117

Problems that are easy to fix ................................117

Problems when you turn on the computer............118

The Windows® operating system is not working......120

Using Startup options to fix problems ............120

Internet problems ...........................................121

The Windows® operating system can help

you............................................................122

Fixing a problem with Device Manager .................122

Checking device properties .............................122

Power and the batteries ........................................123

Keyboard problems...............................................124

Display problems ..................................................125

Disk or storage drive problems.............................126

Error-checking ................................................127

Sound system problems .......................................127

Wireless networking problems..............................128

Develop good computing habits ...........................129

Data and system configuration backup in

the Windows

®

operating system...............130

22

Contents

If you need further assistance...............................135

Contacting Toshiba .........................................135

Other Toshiba Internet Web sites..........................135

Toshiba’s worldwide offices..................................136

Appendix A: Hot Keys/TOSHIBA Cards..................................137

Hot Key Cards .......................................................137

Using the Hot Key Cards .................................138

Hot key functions..................................................138

Help ................................................................138

Display brightness ..........................................138

Output (Display switch) .................................139

Disabling or enabling the touch pad................140

Keyboard hot key functions ...........................141

Disabling or enabling wireless devices............142

Zoom (Display resolution) ..............................143

Appendix B: Power Cord/Cable Connectors.......................... 144

Glossary.................................................................................... 145

Index..........................................................................................160

Introduction

Welcome to the world of powerful, portable, multimedia
computing. With your Toshiba computer, your work and
entertainment can accompany you wherever you go.

Your computer is ENERGY STAR
Toshiba is a partner in the Environmental Protection Agency’s

(EPA) ENERGY STAR
to meet the latest ENERGY STAR
efficiency. Your computer ships with the power management
options preset to a configuration that will provide the most stable
operating environment and optimum system performance for both
AC power and battery modes.

To conserve energy, your computer is set to dim the display after 10
minutes of inactivity, and enter the low-power Sleep mode which
shuts down the system after 15 minutes of inactivity in AC power
mode. We recommend that you leave this and other energy saving
features active, so that your computer will operate at its maximum
energy efficiency. You can wake the computer from Sleep mode by
pressing the power button. See the “Mobile Computing” section of
the Toshiba User’s Guide for more information on using power
management settings to conserve computer energy.

®

qualified.

®

Program and has designed this computer

®

guidelines for energy

23

24

Introduction

When considering additions to your home office, purchase products
that have earned the ENERGY STAR
needs, which can save you money, save energy, and help protect the
climate.

Visit http://www.energystar.gov or

http://www.energystar.gov/powermanagement for more

information regarding the ENERGY STAR

NOTE

NOTE

This computer is compatible with European Union Directive
2002/95/EC, Restriction of the use of certain Hazardous Substances
in electrical and electronic equipment (RoHS), which restricts use of
lead, cadmium, mercury, hexavalent chromium, PBB, and PBDE.
Toshiba requires its computer component suppliers to meet RoHS
requirements and verifies its suppliers’ commitment to meeting
RoHS requirements by conducting component sampling inspections
during the product design approval process.

Certain Microsoft® software product(s) included with this computer
may use technological measures for copy protection. IN SUCH
EVENT, YOU WILL NOT BE ABLE TO USE THE PRODUCT IF YOU DO
NOT FULLY COMPLY WITH THE PRODUCT ACTIVATION
PROCEDURES. Product activation procedures and Microsoft’s
privacy policy will be detailed during initial launch of the product, or
upon certain reinstallations of the software product(s) or
reconfigurations of the computer, and may be completed by Internet
or telephone (toll charges may apply).

Some software may differ from its retail version (if available), and
may not include user manuals or all program functionality.

®

for all your equipment

®

Program.

Introduction

This guide

25

NOTE

This guide

This guide introduces the computer's features as well as some basic
procedures needed to perform tasks in Windows

❖ Read the entire guide from beginning to end.
❖ Skim through and stop when a topic interests you.
❖ Use the table of contents and the index to find specific

The product specifications and configuration information are
designed for a product Series. Your particular model may not have
all the features and specifications listed or illustrated. For more
detailed information about the features and specifications on your
particular model, please visit Toshiba’s Web site at

support.toshiba.com.

While Toshiba has made every effort at the time of publication to
ensure the accuracy of the information provided herein, product
specifications, configurations, prices, system/component/options
availability are all subject to change without notice. For the most
up-to-date product information about your computer, or to stay
current with the various computer software or hardware options, visit
Toshiba’s Web site at support.toshiba.com.

®

7. You can:

information.

26

Safety icons

This manual contains safety instructions that must be observed to
avoid potential hazards that could result in personal injuries,
damage to your equipment, or loss of data. These safety cautions
have been classified according to the seriousness of the risk, and
icons highlight these instructions as follows:

Introduction

Safety icons

Indicates an imminently hazardous situation which, if not avoided,
will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may
result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, may
result in property damage.

NOTE

Other icons used

Additional icons highlight other helpful or educational information:

Provides important information.

TECHNICAL NOTE: This icon indicates technical information about
the computer.

HINT: This icon indicates helpful hints and tips.

DEFINITION: This icon indicates the definition of a term used in the
text.

Other documentation

Your computer’s features and specifications

Certain computer chassis are designed to accommodate all possible
configurations for an entire product Series. Your select model may
not have all the features and specifications corresponding to all of
the icons or switches shown on the computer chassis, unless you
have selected all those features.

This information applies to all the features and icons described in
this guide.

Below are examples of some of the many possible icons used on
your computer:

(Sample Illustration) System icons

Other documentation

Your computer comes with the following documentation:

❖ An electronic version of the User’s Guide (this document)
❖ A Quick Start document
❖ It may also contain guides for other programs that may come

with your system.

For accessory information, visit Toshiba’s Web site at

accessories.toshiba.com.

Introduction

27

Service options

Toshiba offers a full line of optional service programs to
complement its standard limited warranty. Toshiba’s standard
limited warranty, extended warranty, and service upgrade terms and
conditions are available at warranty.toshiba.com.

To stay current on the most recent software and hardware options
for your computer, and for other product information, be sure to
regularly check the Toshiba Web site at support.toshiba.com.

If you have a problem or need to contact Toshiba, see “If Something

Goes Wrong” on page 117.

Chapter 1

Getting Started

This chapter provides tips for using your computer effectively,
summarizes how to connect components, and explains what to do
the first time you use your computer.

Please read the safety instruction information on the Quick Start
document (that shipped with your computer) carefully and make
sure you fully understand the instructions before you attempt to use
your computer in order to avoid potential hazards that could cause
bodily injury, property damage, or damage the computer.

Selecting a place to work

Your computer is portable and designed to be used in a variety of
circumstances and locations.

Setting up a work environment

Place the computer on a hard flat surface that is large enough for the
computer and any other items you are using, such as a printer.
Leave enough space around the computer and other equipment to
provide adequate ventilation. Otherwise, they may overheat.

To keep your computer in prime operating condition, protect your
work area from:

❖ Dust, moisture, and direct sunlight.

28

Selecting a place to work

❖ Equipment that generates a strong electromagnetic field, such

as stereo speakers (other than speakers that are connected to
the computer) or speakerphones.

❖ Rapid changes in temperature or humidity and sources of

temperature change such as air conditioner vents or heaters.

❖ Extreme heat, cold, or humidity.
❖ Liquids and corrosive chemicals.

Keeping yourself comfortable

This section provides information for setting up your work
environment and tips for working comfortably throughout the day.

Computer user comfort recommendations

Good Working Posture

❖ Adjust your chair height: your feet should be flat on the floor

and the bottom of your thighs should be evenly supported by
the seat. If your feet cannot reach the floor, use a foot rest.
Avoid pressure points behind the knee or under the thigh.

❖ The space under your desk should be free of clutter so that your

legs and feet are not restricted, and you can get close enough to
your notebook and other items that you use frequently.

❖ Adjust the chair back rest: it should match the curve of your

back and provide comfortable back support.

❖ Adjust the chair arm rests: they should be about the same

height as the keyboard and comfortably support your arms,
allowing your shoulders to relax.

❖ When using the keyboard, it should be centered in front of you.
❖ The keyboard and pointing device should be close to your

elbow level. The keyboard should be flat so that your wrists are
straight when typing. However, if the notebook is on a work
surface that is above your elbow height you may need to slope
the notebook to keep your wrists straight.

❖ Work with relaxed shoulders.
❖ When typing, keep your wrists straight and try not to rest your

wrists on the notebook. Support your arms on your forearm
area. The forearms can be supported by the chair arm supports
or the desk surface.

❖ The notebook display should be tilted so that the image on the

screen is clear.

Getting Started

29

30

Getting Started

Selecting a place to work

❖ Avoid glare: position the notebook so that light sources (lamps

or windows) do not shine or reflect directly into your eyes.
Place the notebook display away from bright light sources or
reduce the light intensity from windows by using blinds. Glare
on the notebook display may cause eye strain, eye fatigue or
headaches.

❖ Certain notebook displays have a brightness approaching that

of a TV device. We recommend that you adjust the brightness
of your notebook display to a comfortable level to prevent
possible eye strain.

❖ Keep your head level, facing forward and balanced over your

torso.

❖ Adjust the font size of text on your screen to make viewing

comfortable.

❖ Rest your eyes periodically by focusing on objects that are

farther away.

Using the notebook with an external keyboard, mouse or monitor

(Sample Illustration) Correct posture

❖ When using a notebook for long hours, it may be more

comfortable to dock the notebook and use an external
keyboard, mouse and monitor.

❖ The keyboard and mouse (or trackball) should be close to your

elbow level.

❖ The mouse should be next to the keyboard to avoid a reach. If

you have to reach, the arm should be supported in the forearm
area by the desk surface or the chair arm supports.

❖ Alternative keyboards, such as the split curved keyboard, may

❖ Select a mouse that is comfortable for you to use.
❖ Don’t rest your wrists on the edge of the keyboard or on the

❖ The monitor should be about an arm length away while sitting

❖ The monitor should be centered in front of your body.
❖ The top of the monitor should be at or slightly below eye level.

❖ If you use bifocals you may need to lower the monitor.

Typing style

❖ Learn to touch type so that you don’t have to look down at the

❖ Type with straight wrists.
❖ Type lightly.
❖ Learn the keyboard shortcuts for your applications. You will be

❖ Use the pointing device (e.g., touch pad, Accupoint

❖ It is helpful to change the type of pointing device that you use

Getting Started

Selecting a place to work

improve shoulder and arm comfort.

work surface when typing.

back in the chair.

A monitor that is too high or too low can cause awkward head
and neck postures and may lead to discomfort in the neck
muscles.

Alternatively, you might consider customized prescription
computer glasses.

keyboard.

more productive.

pen whichever is available with your notebook computer, or
other optional pointing devices like mouse or trackball) with a
comfortable hand posture. Avoid awkward hand postures or
high gripping force.

on a regular basis to avoid working in just one hand posture.

31

®

, or tablet

Taking breaks and varying tasks

❖ Change they way you work so that you are not stuck in the

same posture for long periods of time. Some people find it
comfortable to occasionally stand while using the notebook. To
do this properly, the notebook needs to be on an elevated
surface. Make sure you follow the Good Working Posture
points mentioned above while working.

32

Getting Started

Selecting a place to work

❖ Take short, strategically spaced rest breaks to avoid eye strain

and body fatigue. For example, stand up and walk around or
stretch for a few minutes every hour.

❖ Taking regular breaks is especially important if you are

working long hours on your computer or working on a
deadline.

❖ If stress at work is affecting your health, try to identify the

sources of the stress and evaluate ways to reduce the stress.

Mobile computing tips

❖ When using the notebook at airports, on airplanes or trains, or

at meetings, make sure that you take the time to consider the
points just mentioned.

❖ When working on the road it may be difficult to set up the

notebook in an optimal position. In these situations it is
important that you take frequent breaks and change your
posture frequently to relieve the excess loads on your body.

❖ Be creative, when in a hotel room, use a rolled up blanket or

pillows to provide back support, or to provide arm support. To
position the computer at a good height, remember to operate
the computer on a hard flat stable surface. Using your
computer on a carpet, blanket or other soft materials can block
the air vents including those located at the base of the computer
and possibly cause overheating of your computer.

Transporting the notebook

Although your notebook is light, carrying it for a long time may
lead to shoulder and arm fatigue. If you carry your notebook with
other items, consider using an ergonomically-designed computer
case.

Seeking additional help

Follow the advice from your employer’s company health and safety
staff. Contact them if you need assistance making adjustment to
your workstation or adjusting the lighting.

Again, if you experience persistent or recurrent pain, ache,
numbness, burning, or stiffness you should promptly see a qualified
health care provider. These sensations may be caused by serious
medical conditions that can be treated.

Check list

Getting Started

Selecting a place to work

For more specific recommendations on the safety and comfort of
your computer environment, customers in the United States may
visit the United States Department of Labor, Occupational Safety &
Health Administration Web site at:

http://www.osha.gov/SLTC/etools/computerworkstations/

❏ Is your chair comfortable - does it support your back and arms

well?

❏ Are your feet flat on the ground?
❏ Is there adequate space under your desk for your legs?
❏ Are the keyboard and mouse at elbow level?
❏ Are your shoulders relaxed when using the keyboard?
❏ Are your shoulders relaxed when using a mouse or other

optional pointing device?

❏ Are your hands and wrists aligned in a comfortable, straight

posture?

❏ Are your arms supported in the forearm area (not at the wrist)?
❏ Do you hold the mouse or trackball with a loose, relaxed hand?
❏ Do you use a light touch when typing or using the mouse?
❏ Do you clean your mouse or trackball regularly?
❏ Is the top of your monitor close to eye level?
❏ Is the monitor about an arm length away?
❏ Have you eliminated the glare on the monitor?
❏ Is the monitor tilted so that it is easy to read?
❏ Do you change postures regularly?
❏ Do you take breaks, at least once an hour?

33

Precautions

Your computer is designed to provide optimum safety and ease of
use, and to withstand the rigors of travel. You should observe
certain precautions to further reduce the risk of personal injury or
damage to the computer.

Avoid prolonged physical contact with the underside or surface of
the computer.

34

Getting Started

Selecting a place to work

Never allow any liquids to spill into any part of your computer, and
never expose the computer to rain, water, seawater or moisture.
Exposure to liquid or moisture can cause electric shock or fire,
resulting in damage or serious injury. If any of these eventualities
should accidentally occur, immediately:

1. Turn off the computer.

2. Disconnect the AC adaptor from the power plug socket and
computer.

Failure to follow these instructions could result in serious injury or
permanent damage to the computer.

Do not turn on the power again until you have taken the computer to
an authorized service center.

❖ Avoid prolonged physical contact with the underside or surface

of the computer.

❖ Computer base and palm rest can become hot! Avoid prolonged

contact to prevent heat injury to skin.

Today’s performance computers generate heat under normal
operating conditions, as a function of system activity. Avoid
extended contact between the computer base or palm rest and your
skin. Under certain operating conditions such prolonged contact
between the computer base or palm rest and your skin may result in
skin irritation and/or heat injury.

Consider using a hard computer insulating pad or similarly suitable
hard insulating material when using a computer on your lap.

Never place a heavy object on the computer and be careful not to
drop a heavy object onto the computer. It could damage the
computer or cause system failure.

❖ Never turn off the computer if a drive light indicates a drive is active.

Turning off the computer while it is reading from or writing to
a disk/disc or flash media may damage the disk/disc or flash
media, the drive, or both.

❖ Keep the computer and disks away from objects that generate

strong magnetic fields, such as large stereo speakers.
Information on some disks is stored magnetically. Placing a

magnet too close to a disk can erase important files.

Getting Started

Selecting a place to work

Handle discs carefully. Avoid touching the surface of the disc. Grasp
it by its center hole and edge. If you handle the disc incorrectly, you
could damage the disc and possibly lose data.

❖ Scan all new files for viruses.

This precaution is especially important for files you receive via
email or download from the Internet. Occasionally, even new
programs you buy from a supplier may contain a computer
virus. You need a special program to check for viruses.

Important information on your computer’s cooling fan

Your computer may have a CPU cooling fan that cools the CPU by
drawing outside air into the computer.

Always make sure your computer and AC adaptor have adequate
ventilation and are protected from overheating when the power is turned
on or when an AC adaptor is connected to a power outlet (even if your
computer is in Sleep mode). In this condition, observe the following:

❖ Never cover your computer or AC adaptor with any object.
❖ Never place your computer or AC adaptor near a heat source,

such as an electric blanket or heater.

❖ Never cover or block the air vents including those located at the

underside of the computer.

❖ Always operate your computer on a hard flat surface. Using your

computer on a carpet or other soft material can block the vents
located at the underside of the computer.

Overheating your computer or AC adaptor could cause system
failure, computer or AC adaptor damage or a fire, possibly resulting
in serious injury.

35

NOTE

The cooling fan location will vary depending on the computer.

36

Getting Started

Setting up your computer

Setting up your computer

TECHNICAL NOTE: You must complete all setup steps up to and
including “Setting up your software” on page 39 before adding
external or internal components to your computer. These
components include, but are not limited to, a mouse, keyboard,
printer, and memory.

Your computer contains a rechargeable main battery that needs to
be charged before you can use it.

To use external power or to charge the battery you must attach the
AC adaptor. See “Connecting to a power source” on page 36.

NOTE

Please handle your computer carefully to avoid scratching or
damaging the surface.

Connecting to a power source

Your computer requires power to operate. Use the power cord/cable
and AC adaptor to connect the computer to a live electrical outlet,
or to charge the computer’s battery.

Never pull on a power cord/cable to remove a plug from a socket.
Always grasp the plug directly. Failure to follow this instruction may
damage the cord/cable, and/or result in a fire or electric shock,
possibly resulting in serious injury.

Always confirm that the power plug (and extension cable plug if
used) has been fully inserted into the socket, to ensure a secure
electrical connection. Failure to do so may result in a fire or electric
shock, possibly resulting in serious injury.

Be careful if you use a multiple connector. An overload on one socket
could cause a fire or electric shock, possibly resulting in serious
injury.

Getting Started

Power cord/cable

AC adaptor

AC adaptor cord

Connecting to a power source

Always use the TOSHIBA AC adaptor that was provided with your
computer, or use AC adaptors specified by TOSHIBA to avoid any
risk of fire or other damage to the computer. Use of an incompatible
AC adaptor could cause fire or damage to the computer possibly
resulting in serious injury. TOSHIBA assumes no liability for any
damage caused by use of an incompatible adaptor.

(Sample Illustration) Power cord/cable and AC adaptor

To connect AC power to the computer:

1 Connect the power cord/cable to the AC adaptor.

37

(Sample Illustration) Connecting the power cord/cable to the AC
adaptor

Handling the cord on this product will expose you to lead, a
chemical known to the State of California to cause birth defects or
other reproductive harm. Wash hands after handling.

38

_

+

Getting Started

Charging the main battery

2 Plug the AC adaptor cord into the DC-IN on the side of the

computer.

(Sample Illustration) Connecting the AC adaptor cord to the
computer

3 Connect the power cord/cable to a live electrical outlet.

The AC power light on the indicator panel glows white.

Never attempt to connect or disconnect a power plug with wet hands.
Failure to follow this instruction could result in an electric shock,
possibly resulting in serious injury.

The computer’s main battery light gives you an indication of
the main battery’s current charge:

❖ Glows amber while the main battery is being charged

(AC adaptor connected)

❖ Glows white when the main battery is fully charged
❖ Is unlit when the main battery has discharged, the battery

is not charging, or the AC adaptor is not plugged into the
computer or AC outlet

❖ Flashes amber when the main battery charge is low and it

is time to recharge the main battery or plug in the AC
adaptor

NOTE

If the AC power light flashes amber during charging, either the main
battery is malfunctioning, or it is not receiving correct input from the
AC power supply.

Charging the main battery

NOTE

The computer battery is not accessible by the user.

Getting Started

Using the computer for the first time

Before using the battery to power the computer, you must charge
the battery.

To charge the battery, leave the computer plugged into an AC power
source with the computer turned off until the battery light glows
white. After that, the battery will be completely charged and ready
to power the computer.

39

NOTE

Battery life and charge time may vary depending on the
applications, power management settings, and features used.

Using the computer for the first time

The computer is now ready for you to turn it on and begin using it.

NOTE

Small bright dots may appear on your screen display when you
turn on your computer. Your display contains an extremely large
number of thin-film transistors (TFT) and is manufactured using
high-precision technology. Any small bright dots that may appear
on your display are an intrinsic characteristic of the TFT
manufacturing technology. Over a period of time, and depending on
the usage of the computer, the brightness of the screen will
deteriorate. This is also an intrinsic characteristic of the screen
technology. When the computer is operated on battery power, the
screen will dim and you may not be able to increase the brightness
of the screen while on battery power.

When opening or closing the display panel, place one hand on the
palm rest to hold the computer in place and use the other hand to
slowly open or close the display panel.

To avoid damaging the display panel, do not force it beyond the point
where it moves easily and never lift the computer by the display
panel.

Do not press or push on the display panel and be careful to remove
any pens or other objects from the keyboard area before closing the
display panel.

Setting up your software

When you turn on the computer for the first time, do not turn off the
power again until the operating system has loaded completely.

40

Getting Started

Registering your computer with Toshiba

NOTE

The first time you turn on your computer, the Setup Wizard guides
you through steps to set up your software. Follow the on-screen
instructions.

The names of windows displayed, and the order in which windows
appear, may vary according to your software setup choices.

Registering your computer with Toshiba

Product registration is strongly recommended, and allows Toshiba
to send you periodic updates, announcements, and special offers
applicable to your product. Product registration can be completed
by either visiting the Toshiba Web site at register.toshiba.com, or by
clicking the Start button, and then in the Search field, typing
Registration. In the list that appears above, click on your selection.
Failure to complete Product Registration will not diminish
Customer rights under the Toshiba standard limited Warranty.

NOTE

To register online, an Internet connection is required.

Adding optional external devices

NOTE

Before adding external devices or memory, Toshiba recommends
setting up your software. See “Setting up your software” on page 39.

After starting your computer for the first time, you may want to:

❖ Connect external devices (see “Connecting an external device”

on page 63)

❖ Connect an external monitor (see “Using external display

devices” on page 64)

Adding memory (optional)

Your computer comes with enough memory to run most of today’s
popular applications. You may want to increase the computer’s
memory if you use complex software or process large amounts of
data. Contact the location you purchased the computer at for more
information on adding memory to your computer. Toshiba will not
be responsible for any product damage, data loss, service or part
replacement made necessary by improper installation of a memory
module.

Recovering the Internal Storage Drive

Recovering the Internal Storage Drive

Getting Started

41

NOTE

Your computer includes recovery utilities to allow you to recover
your internal storage drive if necessary.

The following internal storage drive recovery options are available:

To purchase an optional external writable optical disc drive or a USB
Flash drive, visit the Toshiba Web site at accessories.toshiba.com.

Recovery option Description

Recover to out-of-box
state

Recovery of factory
default software with
user’s data

Recover without
changing the internal
storage drive partitions

Recover to a custom
size partition

This option restores the original factory image to your
internal storage drive, returning your computer to its
out-of-box state. (Recommended recovery method)

See “Recovering to out-of-box state (recommended

recovery method)” on page 42.

This option recovers the factory default software, while
the computer attempts to back up all data from C:\Users.

See “Recovering of factory default software with user’s

data” on page 45.

This option recovers just your C: drive, leaving any other
partitions you may have created (for example, a D: drive)
intact.

See “Recovering without changing the internal storage

drive partitions” on page 48.

This option allows you to specify a custom size for
the C: partition and then restores your C: drive to its
out-of-box state. Note: With this option, any changes you
made to the C: drive and any other drive partitions you
may have created are deleted.

See “Recovering to a custom size partition” on page 50.

A recovery image of your computer is stored on the internal storage
drive, and the image can be restored by running the recovery
utilities directly from your internal storage drive as described in the
sections below. However, it is strongly recommended that you
create recovery media. If the recovery files on your internal storage
drive become corrupted or are deleted, you can restore your system
from your recovery media. Also, if your original internal storage
drive fails, you can restore your system to a new internal storage
drive from your recovery media. It is strongly recommended that
you create recovery media before using your system for the first

42

Getting Started

Recovering the Internal Storage Drive

time. See “Creating recovery media” on page 53 and “Restoring

from recovery media” on page 55.

NOTE

❖ During the internal storage drive recovery process it is strongly

recommended that your computer be connected to an external
power source via the AC adaptor.

❖ The Toshiba Recovery Wizard also provides the option of erasing

your internal storage drive, without restoring the information on
the drive. See “Erasing the Internal Storage Drive” on page 57 for
more information.

❖ When you restore your system, only the operating system files,

applications, and drivers originally shipped with the computer
are restored. Any files that you created are not restored during
this process. Be sure to separately save the files you have
created to external media using Windows
backup program. For more information, see “Backing up your

work” on page 72.

®

Backup or another

Recovering to out-of-box state (recommended recovery method)

Recovering an internal storage drive to its out-of-box state deletes all
partitions on the drive and all information stored in those partitions.
Be sure to save your work to external media before executing the
recovery. For more information, see “Backing up your work” on

page 72.

NOTE

You can recover the original factory image (returning the computer
to its out-of-box state) using the utilities stored on your computer’s
internal storage drive or using recovery media, if you have created
such media. To recover using the first method, follow the procedure
below. To recover using the second method, see “Restoring from

recovery media” on page 55.

During the recovery process it is strongly recommended that your
computer be connected to an external power source via the AC
adaptor.

Getting Started

Recovering the Internal Storage Drive

To recover the original factory image using the utilities on your
computer’s internal storage drive:

1 Make sure the computer is turned off.
2 While powering on your computer, press the

initial TOSHIBA screen displays.
The Boot menu appears.

3 Using the arrow keys to scroll down, select the HDD Recovery

option, and then press the

4 If your system offers a choice of Windows

operating system, select one at this time. If not, skip to step 5.

5 A warning screen appears, stating that when the recovery is

executed all data will be deleted and rewritten. Click Ye s to
continue.

Enter key.

F12 key when the

®

7 32-bit or 64-bit

43

(Sample Image) Warning screen

44

Getting Started

Recovering the Internal Storage Drive

6 When the Toshiba Recovery Wizard opens and the Selecting a

process screen displays, select Recovery of Factory Default
Software and then click Next.

(Sample Image) Selecting a Process screen

7 The Recovery of Factory Default Software screen appears.

Select Recover to out-of-box state.

(Sample Image) Recovery of Factory Default Software screen

8 Click Next.

A confirmation message displays reminding you that all data
will be lost during the recovery process. Be sure to save your
work to external media before proceeding (see “Backing up

your work” on page 72).

Getting Started

Recovering the Internal Storage Drive

9 Click Next to begin the recovery.

When the recovery process is complete, a message displays
indicating that the internal storage drive has been recovered.

10 Click Finish to restart the computer.

Recovering of factory default software with user’s data

Using “Recovery of Factory Default Software with user’s data”
recovers your internal storage drive to factory default state and
attempts to save C:\Users data to C:\Backup. Toshiba does not
guarantee successful data back-up. Please make a complete back up
of your data to external media before executing the recovery. For
more information, see “Backing up your work” on page 72.

45

NOTE

You can recover the factory default software, while the computer
will attempt to back up all of the data from the C:\Users using the
utilities stored on your computer’s internal storage drive:

1 Make sure the computer is turned off.
2 While powering on your computer, press the

3 Using the arrow keys to scroll down, select the HDD Recovery

4 If your system offers a choice of Windows

5 A warning screen appears, stating that when the recovery is

During the recovery process it is strongly recommended that your
computer be connected to an external power source via the AC
adaptor.

TECHNICAL NOTE: The data from C:\Users will be copied into the
C:\backup%current date% folder. The directory structure will be
retained, however all of the data will be moved to this folder during
the recovery process. As a result, any user can access the folders
under C:\backup%current date%. To return the data to your private
account, you will need to recreate a new account, and drag and drop
the data into your personal folders.

F12 key when the

initial TOSHIBA screen displays.
The Boot menu appears.

option, and then press the

operating system, select one at this time. If not, skip to step 5.

executed, all data will be deleted and rewritten unless the

Enter key.

®

7 32-bit or 64-bit

46

Getting Started

Recovering the Internal Storage Drive

“Recovery of Factory Default Software with user’s data”
option is selected in the next step. Click Ye s to continue.

(Sample Image) Warning screen

6 When the Toshiba Recovery Wizard opens and the “Selecting a

process” screen displays, select Recovery of Factory Default
Software with user’s data, and then click Next.

(Sample Image) Selecting a process screen

7 A warning screen appears, stating the Toshiba Recovery

Wizard will “attempt” to save all data. There is a risk that the
Toshiba Recovery Wizard may not be able to save all data
during the recovery process.

Getting Started

Recovering the Internal Storage Drive

Toshiba does not guarantee successful data back up. Be sure to save
your work to external media before executing the recovery
(see “Backing up your work” on page 72).

8 Click Yes to continue.

(Sample Image) Warning screen

9 When the recovery process is complete, the “Recovery of

Factory Default Software” screen appears, indicating that the
recovery process is complete. Click Finish to restart the
computer.

47

(Sample Image) Recovery of Factory Default Software - Recovery complete

48

Getting Started

Recovering the Internal Storage Drive

Recovering without changing the internal storage drive partitions

Recovering without changing the internal storage drive partitions
deletes all information stored on the C: drive. Be sure to save your
work to external media before executing the recovery (see “Backing

up your work” on page 72). If you have created other partitions

(for example, a D: drive), those partitions will remain intact and any
information on them will not be affected.

NOTE

You can recover the C: drive without affecting other partitions by
either using the utilities stored on your computer’s internal storage
drive or by using recovery media, if you have created such media.
To recover using the first method, follow the procedure below. To
recover using the second method, see “Restoring from recovery

media” on page 55.

To recover using the utilities on your computer’s internal storage
drive:

1 Make sure the computer is turned off.
2 While powering on your computer, press the

3 Using the arrow keys to scroll down, select the HDD Recovery

4 If your system offers a choice of Windows

During the internal storage drive recovery process it is strongly
recommended that your computer be connected to an external power
source via the AC adaptor.

F12 key when the

initial TOSHIBA screen displays.
The Boot menu appears.

option, and then press the

operating system, select one at this time. If not, skip to step 5.

Enter key.

®

7 32-bit or 64-bit

Getting Started

Recovering the Internal Storage Drive

5 A warning screen appears stating that when the recovery is

executed all data will be deleted and rewritten. Click Ye s to
continue.

(Sample Image) Warning screen

6 When the Toshiba Recovery Wizard opens and the Selecting a

process screen displays, select Recovery of Factory Default
Software and then click Next.

49

(Sample Image) Selecting a Process screen

50

Getting Started

Recovering the Internal Storage Drive

7 The Recovery of Factory Default Software screen appears.

Select Recover without changing the hard drive partitions.

(Sample Image) Recovery of Factory Default Software screen

8 Click Next.

A confirmation message displays reminding you that all data
on the C: drive will be lost during the recovery process. Be sure
to save your work to external media before proceeding (see

“Backing up your work” on page 72).

9 Click Next to begin the recovery.

When the recovery process is complete, a message displays,
indicating that the C: drive has been recovered.

10 Click Finish to restart the computer.

Recovering to a custom size partition

Recovering to a custom size partition deletes all partitions on the
drive and all information stored in those partitions. Be sure to save
your work to external media before executing the recovery. For more
information, see “Backing up your work” on page 72.

NOTE

The “Recover to a custom size partition” option restores your C:
drive to its out-of-box state, and allows you to specify the size for
the C: partition. You can resize and recover the C: drive using the

During the recovery process it is strongly recommended that your
computer be connected to an external power source via the AC
adaptor.

Getting Started

Recovering the Internal Storage Drive

utilities stored on your computer’s internal storage drive or using
recovery media, if you have created such media. To recover using
the first method, follow the procedure below. To recover using the
second method, see “Restoring from recovery media” on page 55.

To resize and recover the C: drive using the utilities on your
computer’s internal storage drive:

1 Make sure the computer is turned off.
2 While powering on your computer, press the

initial TOSHIBA screen displays.
The Boot menu appears.

3 Using the arrow keys to scroll down, select the HDD Recovery

option, and then press the

4 If your system offers a choice of Windows

operating system, select one at this time. If not, skip to step 5.

5 A warning screen appears, stating that when the recovery is

executed all data will be deleted and rewritten. Click Ye s to
continue.

Enter key.

F12 key when the

®

7 32-bit or 64-bit

51

(Sample Image) Warning screen

52

Getting Started

Recovering the Internal Storage Drive

6 When the Toshiba Recovery Wizard opens and the Selecting a

process screen displays, select Recovery of Factory Default
Software and then click Next.

(Sample Image) Selecting a Process screen

7 The Recovery of Factory Default Software screen appears.

Select Recover to a custom size partition.

(Sample Image) Recovery of Factory Default Software screen

8 Use the on-screen arrow buttons in The size of drive C: field

to set the partition size.

9 Click Next.

A confirmation message displays reminding you that all data
will be lost during the recovery process. Be sure to save your
work to external media before proceeding (see “Backing up

your work” on page 72).

10 Click Next to begin the recovery.

When the recovery process is complete, a message displays
indicating that the C: drive has been recovered.

11 Click Finish to restart the computer.

Creating recovery media

Getting Started

Recovering the Internal Storage Drive

53

NOTE

It is strongly recommended that you create recovery media. If the
recovery files on your internal storage drive become corrupted or
are deleted, you can restore your system from your recovery media.
Also, if your original internal storage drive fails, you can restore
your system to a new internal storage drive from your recovery
media.

NOTE

When you create recovery media, the system will prompt you to
insert several blank DVDs or connect one or more USB flash drives
of a certain minimum capacity to your computer. The amount of
space required for storing the recovery files varies by computer
model. Follow the procedure below to determine how much space
you will need for storing your system’s recovery files.

To create recovery media, you will need an optional external
writable optical disc drive and blank DVDs or a USB flash drive.

To purchase an optional external writable optical disc drive for
creating recovery DVDs, please visit the Toshiba Web site at

accessories.toshiba.com.

When you create recovery media, only the operating system files,
applications, and drivers originally shipped with the computer are
backed up to the external media and can be restored from this media.
Any files that you created are not backed up on the recovery media.
You will need to separately back up the files you created; for more
information, see “Backing up your work” on page 72.

54

Getting Started

Recovering the Internal Storage Drive

To create recovery media:

1 Click the Start button, and then in the Search field, type

Recovery Media Creator. In the list that appears above, click

your selection.
The TOSHIBA Recovery Media Creator dialog box displays.

(Sample Image) TOSHIBA Recovery Media Creator dialog box

2 Select DVD or USB Flash from the drop-down list, depending

on the type of external media you want to use.

NOTE

3 Check the Information area of the dialog box to determine the

4 Do one of the following:

If an external optical disc drive is attached, the DVD option becomes
available in the dialog box.

number of DVDs you will need and/or the minimum amount of
storage space required for copying your system’s recovery files
to USB flash drive(s).

❖ If you are copying files to DVD, connect an optional

external writable optical disc drive to your computer and
insert a blank DVD into the drive.

❖ If you are copying files to a USB flash drive, connect a

USB flash drive of the required minimum capacity (as
specified in the TOSHIBA Recovery Media Creator
utility) to your computer.

Getting Started

Recovering the Internal Storage Drive

All information stored on your DVDs or USB flash drive(s) will be
erased during the process of creating the recovery media. Be sure to
save the information stored on your external media to another
storage device before executing this procedure, or use blank media.

5 Click the Create button in the TOSHIBA Recovery Media

Creator utility dialog box.

6 Follow the on-screen prompts to complete the copy process.

55

NOTE

For information on using the Recovery media you have created with
the preceding steps, see “Restoring from recovery media” on

page 55.

If you are copying the recovery files to DVDs, be sure to label each
DVD in the set sequentially (for example, “1 of 3,” “2 of 3,” etc.), so
that you will know in which order to insert the discs during recovery.

Restoring from recovery media

The recovery process deletes information stored on the internal
storage drive. Be sure to save your work to external media before
executing the recovery (see “Backing up your work” on page 72).

NOTE

If you have created recovery media for your system, you can restore
your system from such media, if necessary. For example, if your
original internal storage drive fails, you can restore your system to a
new internal storage drive from your recovery media. For
instructions on creating recovery media, see “Creating recovery

media” on page 53.

With recovery media, you can:

❖ Recover to out-of-box state (recommended recovery method)
❖ Recovery of factory default software with user’s data
❖ Recover without changing the internal storage drive partitions
❖ Recover to a custom size partition

During the internal storage drive recovery process it is strongly
recommended that your computer be connected to an external power
source via the AC adaptor.

56

Getting Started

Recovering the Internal Storage Drive

For more information on these options, see “Recovering the

Internal Storage Drive” on page 41.

NOTE

To recover your internal storage drive from recovery media:

1 Make sure your computer is turned off.
2 Do one of the following:

3 Turn on your computer. When the initial TOSHIBA screen

4 Using the arrow keys, select the DVD option or the USB Flash

5 A warning screen appears, stating that when the recovery is

6 When the Toshiba Recovery Wizard opens and the Selecting a

7 Select one of the following options:

When you restore your system, only the operating system files,
applications, and drivers originally shipped with the computer are
restored. Any files that you created are not restored during this
process. Be sure to separately save the files you have created to
external media using Windows
For more information, see “Backing up your work” on page 72.

❖ If your recovery files are on DVDs, insert the first recovery

DVD into your optional external writable optical disc
drive. Consult the documentation that came with your
optical disc drive to learn how to load the DVD while the
computer is powered off.

❖ If your recovery files are on a USB flash drive, connect the

USB flash drive to your computer.

displays, press the
The Boot menu displays.

option, depending on which type of media you are using, and
then press the

executed all data on your internal storage drive will be deleted
and rewritten. Click Ye s to continue.

Process screen displays, select Recovery of Factory Default
Software and then click Next.

❖ Recover to out-of-box state (recommended recovery

method)—If you want to recover the original factory
image

❖ Recovery of factory default software with user’s data—If

you want to the recovery the factory default software, while the
computer attempts to back up all data from C:\Users

F12 key on your keyboard.

Enter key.

®

Backup or another backup program.

Erasing the Internal Storage Drive

❖ Recover without changing the hard drive partitions—If

you want to recover the C: partition only, leaving other
partitions you have created intact

❖ Recover to a custom size partition—If you want to

recover the C: drive to its out-of-box state and specify a
custom size for the C: drive. Note: This option deletes all
other partitions from the drive.

8 Follow the on-screen instructions to complete the recovery

process.
When the process is complete, a message displays indicating

that the drive has been recovered.

9 Click Finish to restart the computer.

Erasing the Internal Storage Drive

Erasing the internal storage drive will delete all data on the drive,
including the partitions. Be sure to create recovery media and back
up your data to external media before erasing the internal storage
drive.

Getting Started

57

NOTE

To delete all data and partitions from the internal storage drive:

1 Access the Toshiba Recovery Wizard on your internal storage

If you want to restore the internal storage drive, use one of the
recovery options instead of erasing the drive. For more information,
see “Recovering the Internal Storage Drive” on page 41.

drive or on your recovery media.

❖ To access the Recovery Wizard on your internal

storage drive: While powering on your computer, press
the

F12 key when the initial TOSHIBA screen displays.

The Boot menu appears. Using the arrow keys to scroll
down, select the HDD Recovery option, and then press
the

Enter key. Read the Warning screen that displays, and

then click Ye s to continue.

❖ To access the Recovery Wizard on your recovery

media: Turn off your computer. Insert the first recovery
DVD into your optional external writable optical disc
drive or connect the USB flash drive containing your
recovery files to your computer, and then power on the
computer. When the initial TOSHIBA screen displays,
press

F12. Using the arrow keys, select the DVD or USB

58

Getting Started

Erasing the Internal Storage Drive

Flash option on the Boot menu, depending on which type
of media you are using, and then press the

Toshiba Recovery Wizard, and then click Next.

2 Select Erase the hard disk and then click Next.
3 Choose one of the following options on the Erase the hard disk

screen:

❖ Delete all data and partitions from the hard disk—This

option deletes all of the data on the internal storage drive

without overwriting the drive.

❖ Delete all partitions and overwrite all sectors on the

hard disk—This option deletes all data and then

overwrites the entire internal storage drive for security

purposes. This process may take several hours, depending

on the size of your internal storage drive.

Enter key. Select

(Sample Image) Erase the hard disk screen

4 Click Next.

A confirmation message displays reminding you that all data
on the internal storage drive will be lost. Be sure you have
saved your work to external media (see “Backing up your

work” on page 72) and created recovery media (see “Creating
recovery media” on page 53) before proceeding.

5 Click Next to begin erasing the internal storage drive.

When the process is complete, a message displays, indicating
that the internal storage drive has been erased.

6 Click Finish to restart the computer.

Getting Started

Search field

Start button

Checking the internal storage drive operating status

Checking the internal storage drive operating status

After restoring your internal storage drive, you can check its status
as follows:

1 Click the Start button, and then in the Search field, type

Computer Management. In the list that appears above, click

your selection.

2 Select Manage.
3 Click Disk Management.

Installing drivers and applications

The TOSHIBA Application Installer allows you to reinstall the
drivers and applications that were originally bundled with your
computer.

To reinstall drivers and applications:

1 Click the Start button, and then in the Search field, type

TOSHIBA Application Installer. In the list that appears

above, click your selection.

59

(Sample Image) Search programs and files field in Start menu

2 Click Next.
3 Click the item you want to install.
4 Click Install.
5 Follow the on-screen prompts to complete the installation

process.

60

Touch pad

Secondary control buttonPrimary control button

Getting Started

Using the touch pad

Using the touch pad

NOTE

You can use the touch pad (the small, touch-sensitive area in front
of the keyboard) and the adjacent control buttons to:

❖ Move the pointer on the screen
❖ Select an item on the screen
❖ Open or activate an item on the screen
❖ Scroll through a document or information
❖ Zoom in for a close-up view
❖ Zoom out to see more information at once

(Sample Illustration) The touch pad and associated control buttons

Refer to the table below for specific instructions on performing
each operation.

Some of the touch pad operations described in this section are only
supported in certain applications.

NOTE

To: Do the following: Example:

Move the on-screen
pointer

The pointer is the icon (usually an arrow) that moves on the screen
when you slide your finger across the touch pad or move a mouse
connected to your computer.

Slide your finger across the touch pad in the
direction you want to move the pointer.

To move the pointer a longer distance, slide
your finger several times across the touch
pad in the preferred direction.

(Sample Illustration)
Pointer moves to the right

Getting Started

Using the touch pad

To: Do the following: Example:

61

Select an item

Open or activate an
item

Right-click an item

1 Move the pointer to the item you want to

select.

2 Do one of the following:

❖ Tap the touch pad once

OR

Press and release the primary

❖

(left-hand) control button

1 Move the pointer to the item you want to

open/activate.

2 Do one of the following:

❖ Tap the touch pad twice in rapid

succession

OR

❖ Press and release the primary

control button twice in rapid
succession

1 Move the pointer to the item you want to

right-click.

2 Press and release the secondary control

button.

This feature varies by program. Check your
program documentation for specific
instructions on right-clicking.

(Sample Illustration)
Tap once to select

(Sample Illustration)
Tap twice to open

(Sample Illustration)
Click the secondary
(right-hand) control
button

Scroll vertically

Scroll horizontally

Slide your finger along the right edge of the
touch pad in the direction you want to scroll.
Repeat to scroll a longer distance.

(Sample Illustration)
Vertical scrolling active
area

Slide your finger along the bottom edge of
the touch pad in the direction you want to
scroll. Repeat to scroll a longer distance.

(Sample Illustration)
Horizontal scrolling
active area

62

Getting Started

Using the touch pad

To: Do the following: Example:

Scroll continuously
(Circular scrolling)

1 Begin scrolling vertically or horizontally

by sliding your finger along the right or
bottom edge of the touch pad as
described above.

2 Without lifting your finger from the

touch pad, start moving your finger in a
circular motion on the touch pad.

3 To scroll in the opposite direction,

reverse the direction of the circular
motion.

4 To stop scrolling, lift your finger off of

the touch pad.

To enable circular scrolling, click on the
Mouse icon in the Optimize tab of Toshiba
Assist. Click the Device Settings tab and then
click on Settings. Double-click on
and then double-click on

Scrolling. Enable Chiral Motion scrolling

and click OK.

Zoom in/out To zoom in:

Place two fingers close together on

❖

the touch pad and then slide them
apart.

Scrolling

One-Finger

(Sample Illustration)
Circular scrolling
(vertically)

(Sample Illustration)
Circular scrolling
(horizontally)

(Sample Illustration)
Zooming in

To zoom out:

Place two fingers slightly apart on

❖

the touch pad and then slide them
together.

Adjusting touch pad settings

While you are typing, the on-screen pointer may seem to move or
jump around “by itself” to random locations on the screen. The
on-screen pointer may also seem to automatically select text, click
buttons, and activate other user interface elements. For help with
these problems, try one or more of the following:

(Sample Illustration)
Zooming out

Getting Started

Connecting an external device

❖ Try adjusting your typing technique to avoid accidental contact

with the touch pad. You may be inadvertently brushing the
touch pad with the heel of your hand as you type. Also,
accidental light touches or taps on the touch pad may select an
item or text on the screen, and potentially the item or text may
be replaced by the next character you type.

❖ Temporarily disable the touch pad, so that it does not respond

to touch or button presses while you type. See “Disabling or

enabling the touch pad” on page 63.

❖ Disable the tapping feature. If you disable tapping only, you

can still use the touch pad’s control buttons and move the
pointer by sliding your finger on the touch pad.

❖ Adjust the sensitivity of the touch pad, so that it is less

responsive to accidental light taps and lighter finger pressure.

63

NOTE

Touch pad setting options vary by computer model. The touch pad
settings are accessible through the Mouse Properties option of the
Windows Control Panel. For more information, please visit

support.toshiba.com.

Disabling or enabling the touch pad

The touch pad is enabled by default. To enable/disable the touch
pad, press

touch pad” on page 140.

NOTE

F5. For more information, see “Disabling or enabling the

Alternately, you can disable only the tapping feature. If you disable
tapping only, you can still use the touch pad’s control buttons and
move the pointer by sliding your finger on the touch pad. To disable
tapping only, use the Mouse Properties option in the Windows
Control Panel.

Connecting an external device

You can easily attach an external device your computer.
To do this:

1 Read the directions that came with the device to see if you first

need to install new software.

2 Connect the device’s video or USB cable to the port on the

computer and to the device.

®

64

HDMI® Out port

Getting Started

Using external display devices

3 Connect the device’s power cable to a live electrical outlet

(if applicable).

4 Turn on the external device (if applicable).

Your computer may automatically detect the external device.

Using external display devices

Your computer comes with a built-in display, but you can also
connect an HDMI
via the HDMI

®

-compatible television or external display device

®

Out port.

NOTE

To locate your HDMI port, please refer to your Quick Start document.

(Sample Illustration) Video port

Selecting video cables

To connect a device to the HDMI® Out port, you must purchase an

®

HDMI

cable.

Connecting an HDMI®-compatible television or display device

To connect an HDMI®-compatible television or display device to
the computer:

❖ Connect one end of an HDMI

computer) to the HDMI
computer, and then connect the other end of the cable to your
television or display device. Refer to the manual that came
with the television or display device for more information.

Your computer will automatically detect the external display
device.

®

cable (not included with your

®

Out port on the side of your

NOTE

In the future you can change the display settings by pressing F4, or
by configuring the display properties settings.

Getting Started

Using external display devices

Directing the display output when you turn on the computer

Once you have connected an external display device, you can
choose to use the internal display only, the external device only, or
both simultaneously.

65

NOTE

The quickest way to change the display output settings is to use the
display hot key (

Press
pause each time you press the
change.

This hot key cycles through the settings in the following order (the
last two options are available if an external monitor is connected):

Some modes are only available with the appropriate device attached
and turned on.

F4):

F4 repeatedly until the setting you want takes effect. Briefly

F4 key to allow time for the display to

❖ Built-in display only
❖ Built-in display and external monitor simultaneously
❖ External monitor only
❖ Built-in display and external monitor (extended desktop)
❖ Swap-Switch primary display between internal display

and external monitor when using extended desktop

(Sample Image) Display options window

Adjusting the quality of the external display

To obtain the best picture quality from your television (or other
video display device), you may need to adjust the video settings.
See the video device documentation for additional configuration
steps.

66

Getting Started

Customizing your computer’s settings

Customizing your computer’s settings

There are several ways in which you can customize your computer
to suit your particular requirements. Refer to your operating system
documentation or Help and Support for details.

You may also wish to customize your power usage settings. For
more information, see “Power Plans” on page 81. There are
additional custom settings you can choose. See “Utilities” on

page 94.

Caring for your computer

This section gives tips on cleaning and moving your computer. For
information about taking care of your computer’s battery, see

“Taking care of your battery” on page 83.

NOTE

Please handle your computer carefully to avoid scratching or
damaging the surface.

Cleaning the computer

Keep liquids, including cleaning fluid, out of the computer’s
keyboard, speaker, and other openings. Never spray cleaner directly
onto the computer and/or display. Never use harsh or caustic
chemical products to clean the computer.

To keep your computer clean, gently wipe the display panel and
exterior case with a lightly dampened cloth.

Moving the computer

Before moving your computer, even across the room, make sure all
drive activity has ended (the internal storage drive light stops
glowing) and all external peripheral cables are disconnected.

Do not pick up the computer by its display panel or by the back.
Doing so could damage the system.

Using a computer lock

You may want to secure your computer to a heavy object such as
your desk. The easiest way to do this is to purchase an optional
computer lock cable. For more information on purchasing a cable
lock, visit accessories.toshiba.com.

(Sample Illustration) Computer lock cable

To secure the computer:

1 Wrap the cable through or around some part of a heavy object.

Make sure there is no way for a potential thief to slip the cable
off the object.

2 Pass the locking end through the loop.
3 Insert the cable’s locking end into the security lock slot on your

computer, then engage the locking device.
The computer is now securely locked.

Getting Started

Caring for your computer

67

(Sample Illustration) Attaching security lock cable

Chapter 2

Learning the Basics

This chapter gives some computing tips and provides important
information about basic features.

Computing tips

❖ Save your work frequently.

Your work stays in the computer’s temporary memory until
you save it to the internal storage drive. If the network you are
using goes down and you must restart your computer to
reconnect, or your battery runs out of charge while you are
working, you will lose all work since you last saved.

See “Saving your work” on page 72 for further information.

68

HINT: Some programs have an automatic save feature that can be
activated. This feature saves your file to the internal storage drive at
preset intervals. See your software documentation for details.

Learning the Basics

Using the keyboard

❖ Back up your files to external media on a regular basis. Label

the backup copies clearly and store them in a safe place.
It is easy to put off backing up because it takes time. However,

if your internal storage drive suddenly fails, you will lose all
the data on it unless you have a separate backup copy. For more
information, see “Data and system configuration backup in the

Windows

❖ Use Error-checking and Disk Defragmenter regularly to check

and optimize disk space and improve performance.

❖ Scan all new files for viruses.

This precaution is especially important for files you receive via
external media, email, or download from the Internet.

❖ Take frequent breaks to avoid repetitive-motion injuries and

eyestrain.

❖ Do not turn off the computer if a drive indicator light indicates

a drive is active.
Turning off the computer while it is reading from or writing to

a disk may damage the disk, the drive, or both.

®

operating system” on page 130.

69

NOTE

The Windows® operating system records information, such as your
desktop setup, during its shutdown procedure. If you do not let the
Windows
new icon positions may be lost.

Using the keyboard

Your computer’s keyboard contains character keys, control keys,
function keys, and special Windows® keys, providing all the
functionality of a full-size keyboard.

(Sample Illustration) Keyboard

®

operating system shut down normally, details such as

70

Application key

Windows

®

key

Learning the Basics

Using the keyboard

Character keys

Typing with the character keys is very much like typing on a
typewriter, except that:

❖ The space bar creates a space character instead of just passing

over an area of the page.

❖ The lowercase letter l (el) and the number 1 are not

interchangeable.

❖ The uppercase letter O and the number 0 are not

interchangeable.

Function keys

The function keys (not to be confused with the Fn key) are the 12
keys at the top of the keyboard.

(Sample Illustration) Function keys

F1 through F12 are called function keys because they execute

programmed functions when pressed. Used in combination with the

Fn key, function keys marked with icons execute specific functions

on the computer.

Special Windows® keys

(Sample Illustration) Special Windows® keys

Your computer’s keyboard has one key and one button that have
special functions in Windows

❖ Windows
❖ Application key—Has a similar function as the secondary

mouse button

®

key—Opens the Start menu

Backlit keyboard

Your keyboard may have a backlight illumination feature. If the
keyboard backlight setting is set to Auto, the backlight turns on
when you type on the keyboard and turns off after a certain interval
when you stop typing. You can modify the time-out interval or
change the keyboard backlight setting to always on or always off
using the

Fn + Z keys.

®

:

Learning the Basics

Search programs
and files field

Starting a program

Starting a program

The easiest way to start a program is to double-click the name of
the file that contains the information you want to work on. To find
the file, use the Start menu or Windows

If you prefer to open the program first, you have three options. You can:

❖ Use the Search programs and files field in the Start menu
❖ Double-click the icon for the program on your desktop
❖ Use the Start Menu

The next two sections explain how to start a program from the Start
menu and the Search programs and files field.

Starting a program using the Search programs and files field

This example uses the Start menu’s Search programs and files field
to start WordPad:

1 Click Start to display the Start menu.

The Search programs and files field appears at the bottom of
the Start menu.

®

Explorer.

71

Starting a program from the Start menu

(Sample Image) Search programs and files field in Start menu

2 Start typing the program’s name (

programs and files field.
As you type, all matching files and programs are displayed in a

separate window.

3 In the search results window, click Word Pad under Programs.

When you install a program, the operating system usually puts an
icon in the All Programs menu. To start a program that has an icon

wordpad) in the Search

72

Learning the Basics

Saving your work

in the All Programs menu, follow these steps, which use the
Windows

1 Click Start, and then All Programs.

NOTE

2 Click the program group, in this example, Accessories.

3 Click the program, in this example, WordPad.

®

WordPad program as an example:

The Windows
menu, which lists programs and program groups. If your
program is listed, go to step 3, otherwise, continue with step 2.

If you pause with your mouse on All Programs, it will open it up. You
may need to scroll up or down to see the complete list.

The Accessories menu is displayed.

WordPad opens.
To close the program, click the Close button in the upper-right

corner of the program’s window.

Saving your work

Before you turn off the computer using the Shut down command,
save your work on the internal storage drive, external media, flash
media, or optical disc. This is one of the most important rules of
computing.

When you turn off the computer using the Sleep or Hibernate
commands, your work should be there when you resume.

Many programs offer a feature that saves documents at regular
intervals. Check your program’s documentation to see if it has an
automatic save feature.

®

operating system displays the All Programs

Backing up your work

Back up all the files you create in case something happens to your
computer. You can back up your files to different types of media
such as CDs, DVDs, external storage media, or to a network, if
available.

To back up several files at one time, use the Microsoft
Backup program preinstalled on the computer’s internal storage
drive. Also see “Backing up your data or your entire computer with

the Windows

®

operating system” on page 132.

®

Windows®

HINT: Backing up all the files on your internal storage drive may take
a considerable amount of time and multiple CDs/DVDs. You may
prefer to use a high-capacity backup system, such as an external
hard drive.

Restoring your work

To restore information from your backup media to your internal
storage drive, use the Restore option in the Windows
Restore program. Look in the online Help or your operating system
documentation for information on restoring files.

Learning the Basics

Toshiba’s online resources

®

Backup and

73

(Sample Image) Backup and Restore screen

TECHNICAL NOTE: When restoring files, the backup program
prompts you if you try to overwrite a file that already exists on the
internal storage drive. Make sure the backup version is the one you
want before overwriting the existing file.

Toshiba’s online resources

Toshiba maintains a number of online sites to which you can
connect. These sites provide information about Toshiba products,
give help with technical questions and keep you up to date with
future upgrades. For more information, see “Contacting Toshiba”

on page 135.

Chapter 3

Mobile Computing

This chapter covers all aspects of using your computer while
traveling.

Toshiba’s energy-saver design

Your computer enters a low-power suspension mode when it is not
being used, thereby conserving energy and saving money in the
process. It has a number of other features that enhance its energy
efficiency.

Many of these energy-saving features have been preset by Toshiba.
We recommend you leave these features active, allowing your
computer to operate at its maximum energy efficiency, so that you
can use it for longer periods while traveling.

Running the computer on battery power

The computer contains a Lithium-Ion (Li-Ion) battery that provides
power when you are away from an AC outlet. You can recharge it
many times.

Battery Notice

Battery life rating is for comparison purposes only, and does not
indicate the battery life that will be obtained by any individual user.
Actual battery life may vary considerably from specifications
depending on product model, configuration, applications, power

74

Mobile Computing

Running the computer on battery power

management settings and features utilized, as well as the natural
performance variations produced by the design of individual
components. The battery life rating is only achieved on the select
models and configurations tested by Toshiba under the specific test
settings at the time of publication and is not an estimate of a
system’s battery life under any conditions other than the specific
test settings.

Recharge time varies depending on usage. Battery may not charge
while the computer is consuming full power. After a period of time,
the battery will lose its ability to perform at maximum capacity and
will need to be replaced. This is normal for all batteries.

To ensure that the battery maintains its maximum capacity,
operate the computer on battery power at least once a month. The
Lithium-Ion battery has no memory effect so it is not necessary to
let the battery fully discharge each time. However, for better
accuracy of the battery meter, it is helpful to fully discharge the
battery periodically. Please see “Maintaining your battery” on

page 84 for procedures. If the computer is continuously operated on

AC power, either through an AC adaptor or a port replicator (if
applicable to your system), for an extended period (more than a
month), the battery may fail to retain a charge. This may shorten the
life of the battery, and may cause the battery meter to be inaccurate.

75

NOTE

The computer also has an internal real-time-clock (RTC) battery.
The RTC battery powers the RTC memory that stores your system

configuration settings and the current time and date information. It
maintains this information for up to a month while the computer is
turned off.

For optimum optical media performance, it is recommended that you
play DVDs while running the computer on AC power. For more
information about Windows

page 81.

TECHNICAL NOTE: Depending on your system, the RTC battery may
only charge while the computer is turned on.

Power management

Your computer ships with the power management options preset
to a configuration that will provide the most stable operating
environment and optimum system performance for both AC power
and battery modes.

®

power plans, see “Power Plans” on

76

Mobile Computing

Charging batteries

Changes to these settings may result in system performance or
stability issues. Users who are not completely familiar with the power
management component of the system should use the preset
configuration. For assistance with setup changes, contact Toshiba’s
Customer Support Center.

Charging batteries

The battery needs to be charged before you can use it to power the
computer.

Always use the AC adaptor specified by Toshiba. You can
order a Toshiba AC adaptor from Toshiba’s Web site at

accessories.toshiba.com.

NOTE

Battery charge time may vary depending on the applications, power
management settings, and features used.

Charging the main battery

To charge the main battery, plug the computer into a live electrical
outlet. The battery charges whether the computer is on or off.

The battery may not start charging immediately under the following
conditions:

❖ The battery is extremely hot or cold.

To ensure that the battery charges to its full capacity, wait until
it reaches room temperature (50 to 80 degrees Fahrenheit, 10 to
26 degrees Celsius).

❖ The battery is almost completely discharged.

Leave the power connected and the battery should begin
charging after a few minutes.

HINT: Once the battery is fully charged, we recommend that you
operate your computer on battery power until the battery discharges
completely. Doing this extends battery life and helps ensure accurate
monitoring of battery capacity.

Please make a complete back up of your data to external media
before discharging the battery. For more information, see “Backing

up your work” on page 72.

Charging the RTC battery

Your computer has an internal real-time clock (RTC) battery. The
RTC battery powers the System Time Clock and BIOS memory
used to store your computer’s configuration settings. When fully
charged, it maintains this information for up to a month when the
computer is powered off.

The RTC battery may have become completely discharged while
your computer was shipped, resulting in a CMOS error message
during startup. The error message may vary by computer model.

Mobile Computing

Monitoring main battery power

77

NOTE

To recharge the RTC battery, plug the computer into a live electrical
outlet and leave the computer powered on for 24 hours.

NOTE

The computer can be used while the RTC battery is being charged,
although the charging status of the RTC battery cannot be
monitored.

Depending on your system, the RTC battery may only charge while
the computer is turned on.

It is seldom necessary to charge the RTC battery because it charges
while the computer is on. If the RTC battery is low, the real-time
clock and calendar may display the incorrect time and date or stop
working.

When Hibernation mode is enabled and the RTC battery is
completely discharged, a warning prompts you to reset the real-time
clock.

Monitoring main battery power

The computer’s main battery light gives you an indication of the
main battery’s current charge.

❖ Glows amber while the main battery is being charged

(AC adaptor connected)

❖ Glows white when the main battery is fully charged

78

System indicator lights

AC power light/Battery light

Wireless indicator light

ON/OFF light

Mobile Computing

Monitoring main battery power

❖ Is unlit when the battery has discharged, the battery is not

charging, or the AC adaptor is not plugged into the computer or
AC outlet

NOTE

❖ Flashes amber when the main battery charge is low and it is

NOTE

Battery life and charge time may vary, depending upon power
management settings, applications and features used.

time to recharge the main battery or plug in the AC adaptor

If the AC power light flashes amber during charging, either a battery
pack is malfunctioning, or it is not receiving correct input from the
AC power supply.

HINT: Be careful not to confuse the battery light ( ), the ON/OFF
light ( ), and the power button light.

When the ON/OFF light or power button light flashes amber, it
indicates that the system is suspended (using the Windows
operating system Sleep command).

®

(Sample Illustration) Power and battery light locations

Monitoring main battery power

Determining remaining battery power

Mobile Computing

79

NOTE

Move the pointer over the power icon in the notification area, see

“Finding your way around the desktop” on page 87 for more

information on the notification area. A pop-up message displays the
remaining battery power as a percentage.

With repeated discharges and recharges, the battery’s capacity
gradually decreases. A frequently used older battery does not power
the computer for as long as a new battery, even when both are fully
charged.

Wait a few moments after turning on the computer before trying to
monitor the remaining battery power. The computer needs this time
to check the battery’s remaining capacity and perform its
calculations.

TECHNICAL NOTE: The computer drains the battery faster at low
temperatures. Check your remaining charge frequently if you are
working in temperatures below 50 degrees Fahrenheit.

The computer calculates the remaining battery charge based on your
current rate of power use and other factors such as the age of the
battery.

What to do when the main battery runs low

When the main battery runs low you can:

❖ Plug the computer into an external power source and recharge

the main battery

❖ Save your work and turn off the computer

If you do not manage to do any of these things before the main
battery completely runs out of power, the computer automatically
enters Hibernation mode and turns itself off. Hibernation mode
keeps track of where you were, so that when you turn on the power
again, you can continue where you left off.

If you have Hibernation mode enabled (the default), the computer
copies the details of your open programs and files to the internal
storage drive before shutting down.

Setting battery notifications

You can set two notifications. Each notification can be set to alert
you when a specified percentage of remaining battery power has

80

Mobile Computing

Monitoring main battery power

been reached. You can also set the computer to enter Sleep mode or
Hibernation mode or to completely power down when the
notification goes off.

To change the default notification settings:

1 Click the Start button, and then in the Search field, type

Power Options. In the list that appears above, click your

selection.
The Power Options window appears.

2 Click Change plan settings under the power plan to be

customized.
The Edit Plan Settings window appears.

3 Click Change advanced power settings.

The Advanced settings tab of the Power Options window
appears.

4 Double-click Battery to display the battery options.

(Sample Image) Advanced settings tab of Power Options screen

5 Configure the alarm settings to suit your needs.

Conserving battery power

How long a fully charged battery pack lasts when you are using the
computer depends on a number of factors, such as:

❖ How the computer is configured
❖ How much you use the internal storage drive or other optional

devices

❖ Where you are working, since operating time decreases at low

There are various ways in which you can conserve power and
extend the operating time of your battery:

❖ Enable Sleep or Hibernation, which saves power when you turn

❖ Use the Windows

These power-saving options control the way in which the computer
is configured. By using them, you can increase the length of time
you can use the computer before you need to recharge the battery.

Microsoft
Using one of these power plans lets you choose between maximum
power savings and peak system performance. You may also set
individual power-saving options to suit your own needs.

The following sections describe how to choose a Power Plan and
discuss each power-saving option.

Power Plans

You can choose a predefined Power Plan or select your own
combination of power options. To do this:

1 Click the Start button, and then in the Search field, type

Mobile Computing

Monitoring main battery power

temperatures

off the computer and turn it back on again

®

power-saving option plans

®

has combined these options into preset Power Plans.

Power Options. In the list that appears above, click your
selection.

The Windows

®

Power Options window appears.

81

(Sample Image) Windows

®

Power Options window

82

Mobile Computing

Using the TOSHIBA eco power plan

2 Select an appropriate plan for your work environment or create

your own custom plan.

3 Click Create a power plan in the left pane to set up a new

plan.

NOTE

4 Click Change plan settings to choose the plan you want to

5 Click Change advanced power settings to access settings for

6 Click OK to save the plan changes you have performed.

By default the two power plans eco and Balanced are satisfactory
for most people and do not need to be edited. The eco plan is the
best used for maximum battery time. The Balanced plan is a
compromise between battery time and performance.

To edit a plan or to edit advanced settings, continue to the following
steps.

edit.
This screen allows you to change basic settings.

battery notification levels, internal storage drive power save
time, etc.

You can click on the plus signs to expand each item and to see
what settings are available for each item.

Using the TOSHIBA eco power plan

This computer is equipped with the TOSHIBA eco power plan.
Operating the computer with this power plan enabled reduces
electrical power consumption by slightly lowering system
performance. For example, when this power plan is enabled, the
brightness of the display is reduced and the interval before Sleep
mode takes effect is shortened. To enable or disable the TOSHIBA
eco power plan, see “Power Plans” on page 81.

The TOSHIBA eco Utility™ monitors your power savings from
using the eco power plan by tracking real-time power consumption
and accumulated savings over time. To learn how to access the
utility, see “TOSHIBA eco Utility™” on page 114.

For more information on the TOSHIBA eco power plan, see the
Help file in the TOSHIBA eco Utility™ window.

Changing the main battery

When your main battery has run out of power, plug in the AC
adaptor.

If you find that a new battery is needed, contact the location where
you purchased the computer for more information on replacing the
battery. Toshiba will not be responsible for any product damage,
data loss, service or part replacement made necessary by improper
installation of a new battery.

If the battery is leaking or its case is cracked, put on protective
gloves to handle it.

Taking care of your battery

The following sections offer tips on how to take care of your battery
and prolong its life.

Safety precautions

Computer warning indicators

❖ Always immediately turn the power off and disconnect the power

cable/cord plug from the plug socket and stop using the
computer if you observe any of the following conditions:

❖ Offensive or unusual odor
❖ Excessive heat
❖ Discoloration
❖ Deformation, cracks, or leaks
❖ Smoke
❖ Other unusual event during use, such as abnormal sound
❖ Do not expose the computer to fire. The battery could explode.

Do not turn on the computer’s power again until an authorized
Toshiba service provider has checked it for safety. Continued use
could cause a fire or rupture possibly resulting in serious injury or
computer failure including but not limited to the loss of data.

Mobile Computing

Taking care of your battery

83

84

Mobile Computing

Disposing of your computer

Maintaining your battery

Fully discharging your battery pack will allow better accuracy of
the battery meter.

To fully discharge your battery pack:

❖ Periodically, disconnect the computer from a power source and

operate it on battery power until the battery pack fully
discharges. Before doing so, follow the steps below:

1 Turn off the computer’s power.
2 Disconnect the AC adaptor and turn on the computer’s

power. If it does not turn on, go to step 4.

3 Operate the computer on battery power for five minutes. If

the battery pack has at least five minutes of operating time,

continue operating until the battery pack is fully

discharged. If the battery light flashes or there is some

other warning to indicate a low battery, go to step 4.

4 Connect the AC adaptor to the computer and the

power cord/cable to a power outlet. The DC-IN or AC

power-light should glow white, and the battery light

should glow amber to indicate that the battery pack is

being charged. If the DC-IN or AC power-light indicator

does not glow, power is not being supplied. Check the

connections for the AC adaptor and power cord/cable.

5 Charge the battery pack until the battery light glows white.

If you are not going to use the computer for more than eight hours,
disconnect the AC adaptor.

Disposing of your computer

Never attempt to dispose of a computer by burning or by
throwing it into a fire, and never allow exposure to a heating
apparatus (e.g., microwave oven). Heat can cause a computer to
explode and/or release caustic liquid, both which may possibly
cause serious injury.

Discard this computer in accordance with applicable laws and
regulations.

Disposal of this product may be regulated due to environmental
considerations. For disposal, reuse or recycling information, please
contact your local government.

In addition, Toshiba’s recycling initiatives include recycling
programs, events and consumer promotions. For details, please visit

us.toshiba.com/green.

Notice regarding CR coin cell batteries, applicable to California,
U.S.A. only:

Perchlorate Material - special handling may apply.
See dtsc.ca.gov/hazardouswaste/perchlorate/

Traveling tips

The environmental precautions listed in “Selecting a place to work”

on page 28, also apply while traveling.

❖ Never leave your computer on a sunny ledge or in a place

where it could get wet or covered in dust.

❖ Always travel with the computer in a carrying case. Toshiba

offers a choice of carrying cases for the computer. They all
provide plenty of extra space for manuals, power cords, and
compact discs. Contact your authorized Toshiba representative
for more information or visit Toshiba’s Web site at

accessories.toshiba.com.

Mobile Computing

Traveling tips

TECHNICAL NOTE: When traveling by air, you may be required to
pass your computer through airport security equipment. The X-ray
equipment will not harm your computer.

85

NOTE

NOTE

Before using your computer aboard an aircraft, make sure the
Wireless antenna is OFF if your computer has wireless LAN
capability.

To enable or disable wireless communication, use the Hot Key F12.
For more information see “Disabling or enabling wireless devices”

on page 142.

Chapter 4

Exploring Your Computer’s
Features

In this chapter, you will explore some of the special features of your
computer.

Exploring the desktop

The desktop is the launching pad for everything you can do in the
Windows
programs, find documents, set up system components, and perform
most other computing tasks.

®

operating system. You can use its features to start

86

HINT: The illustrated examples in this guide may appear slightly
different from the screens displayed by your system. The differences
are not significant and do not indicate any change in the functionality
of your system.

Exploring Your Computer’s Features

Start button

Ta sk ba r

Icons

Notification area

Finding your way around the desktop

Your computer’s desktop includes several standard features: icons,
Start button, taskbar, notification area, and background pattern.

Exploring the desktop

87

(Sample Image) Windows

®

operating system desktop

Icons

An icon represents a folder, file, or program that can be quickly
activated by double-clicking the icon.

You can create a new desktop icon for any folder, file, or program
by dragging the element’s icon from its location in a window to the
desktop area.

You may see various icons displayed on your system desktop, for
example:

Recycle Bin—Holds files you have deleted. You may be able to
retrieve these files until you empty the Recycle Bin.

88

Exploring Your Computer’s Features

Exploring the desktop

❖ TECHNICAL NOTE: If you delete a large number of files or very

large files from the internal storage drive, there may be
insufficient space available in the Recycle Bin to hold these files.
In this case, Windows
delete the file(s) or cancel the deletion.

❖ If you delete a file (of any size) from an external media or flash

media, it does not go into the Recycle Bin. The file is
permanently deleted.

❖ Permanently deleted files cannot be recovered from the Recycle

Bin.
For more information on the Recycle Bin, see Windows
Help.

®

will prompt you to either permanently

®

online

NOTE

If you place the pointer over an icon, a popup description of the file
contents appears.

Your desktop may contain other icons depending on your
configuration. See Windows

®

online Help for more specific

information on each icon and how to use it.

Start button

You use the Start button to:

❖ Start programs
❖ Open documents
❖ Adjust system settings
❖ Find files
❖ Access Windows
❖ Suspend system activity and shut down the computer

NOTE

Whenever a procedure in this User’s Guide instructs you to click
Start, it means that you should click the Start button.

®

Help and Support

Exploring Your Computer’s Features

Setting up for communications

Taskbar

Each time you open a program, a button associated with that
program appears on the taskbar. With some programs, a button
appears on the taskbar for each document or window you open. You
can use these buttons to quickly switch between the programs or
windows.

To make a program or window the currently active one, click the
associated taskbar button.

Notification area

The notification area displays icons of tasks or programs that run
continuously in the background and displays notifications. To learn
more about each task, position the pointer over the icon for a few
moments and a short description of the task appears.

Typical tasks in the notification area are Current time, Power usage
mode, network connectivity status, and speaker volume.

To activate a specific task, click the appropriate notification area
icon.

Setting up for communications

To connect to the Internet, use an online service, or communicate
across the telephone lines with another computer, you need:

❖ A browser or communications program
❖ An Internet Service Provider (ISP) or online service if you plan

to use the Internet

❖ A way to connect to the ISP (for example Wi-Fi

broadband connection, etc.)

®

/LAN/

89

Using Wireless LAN connectivity

NOTE

Your system may come with an optional wireless LAN module.
This is a technology that expands wireless communication beyond
networking equipment, and can connect many different kinds of
electronic devices without the need for cables.

Wireless connectivity and some features may require you to
purchase additional software, external hardware or services.
Availability of public wireless LAN access points may be limited.

90

Exploring Your Computer’s Features

Exploring audio features

For information on how to set up a wireless connection, refer to
your wireless networking device documentation or your network
administrator.

NOTE

NOTE

For help with common Wi-Fi

networking problems” on page 128.

To enable or disable wireless communication, use the Hot Key F12.
For more information see “Disabling or enabling wireless devices”

on page 142.

When the Wireless antenna is ON, the wireless indicator light will
be lit.

®

networking problems, see “Wireless

Connecting your computer to a network

You can connect your computer to a network to increase its
capabilities and functionality using one of its communication ports.

Accessing a network

To access a network, connect an Ethernet cable to the Network port
(RJ45) on your computer. For specific information about
connecting to the network, consult your network administrator.
Many hotels, airports, and offices offer Wi-Fi
computer has Wi-Fi
network.

®

, ask for help when connecting to a Wi-Fi®

Exploring audio features

You can use your computer to record sounds using the computer’s
internal microphone (available on certain models) or an optional
external microphone. You can listen to sound files or audio CDs
using the built-in speakers, headphones, or external speakers.

®

access. If your

Recording sounds

You may record sounds using the computer’s internal microphone
(available on certain models) or by connecting an optional external
microphone.

Using a microphone

1 If you want to use an external microphone, connect it to the

computer.

Exploring Your Computer’s Features

Start Recording/Stop Recording button

Exploring audio features

2 Click the Start button, and then in the Search field, type

Sound Recorder. In the list that appears above, click your

selection.

(Sample Image) Sound Recorder screen

3 Click the Start Recording button.
4 Speak normally into the microphone.
5 When you have finished recording, click the Stop Recording

button.
The Save As dialog box appears.

6 To save the file, type a file name, and then click Save.

Using external speakers or headphones

Your computer is equipped with a full stereo sound system with
internal speakers. Instead of using the internal speakers, you can
connect headphones or a pair of external stereo speakers.

91

Before putting on headphones to listen, turn the volume down. Do
not set the volume too high when using headphones. Continuous
exposure to loud sound can harm your hearing.

TECHNICAL NOTE: When using amplified speakers, use speakers
that require an external power source. Other types of speakers will be
inadequate to produce sound from the computer.

To play back sound files through external speakers or headphones:

1 Locate the headphone jack on the computer.
2 Using any necessary adapters, plug the cable from the

headphones or external speakers into the headphone jack.
The headphone jack requires a 16-ohm stereo mini connector.

To adjust the volume:

❖ For external speakers, use the volume controls on each speaker.
❖ For headphones, use the computer’s volume control.

92

Exploring Your Computer’s Features

Using the Web Camera

Using the Web Camera

Your computer may come with a built-in Web Camera. With this
Web Camera you can do the following:

❖ Take pictures and record videos with your computer
❖ Chat with others and have them see you while using instant

messaging (IM) programs

❖ Have video conference calls

NOTE

Depending on your computer model, the process of sending email,
taking pictures or recording video messages may vary.

To access the Web Camera, click the Start button, and then in the
Search field, type Web Camera. In the list that appears above,
click your selection. The Web Camera indicator light glows when
the Web Camera is active.

To email, instant message or video conference, you must be
connected to the Internet.

Using the Memory card reader

The Memory card reader supports the use of Memory Stick®,
Memory Stick PRO™, or Secure Digital™ (SD/SDHC/SDXC).
These media can be used with a variety of digital products: digital
music players, cellular phones, digital cameras, digital video
camcorders, etc.

To use a micro or mini SD™ Card, an SD™ adapter is required.

The Memory card reader may also support other types of media.

NOTE

Do not use the Copy Disk function for this type of media. To copy
data from one media to another, use the drag-and-drop feature of the
Windows® operating system.

Inserting memory media

NOTE

The following instructions apply to all types of supported media
devices.

1 Turn the media so that the contacts (metal areas) are face down.

To locate your Memory card reader, please refer to your Quick Start
document.

2 Push the media into the adapter until it locks in place.

(Sample Illustration) Inserting memory media

When inserting memory media, do not touch the metal contacts. You
could expose the storage area to static electricity, which can destroy
data.

Removing memory media

1 Prepare the card for removal by clicking on the Show hidden

icons button ( ), if necessary, in the notification area and then

selecting the Safely Remove Hardware and Eject Media
icon.

If the system is unable to prepare the media for safe removal, a
message will tell you to try again later. If the media can be
removed now, the system displays Safe to Remove Hardware.

If the computer has a spring-loaded adapter slot, see step 2;
otherwise, skip to step 3.

2 Gently press the card inward to release it.

The card pops out slightly.

3 Grasp the card and pull it straight out.

Exploring Your Computer’s Features

Using the Memory card reader

93

(Sample Illustration) Removing memory media

Do not remove memory media while data is being written or read.
Even when the Windows
to the media might still be in progress and your data could be
destroyed.

®

message “copying...” disappears, writing

Chapter 5

Utilities

Your computer includes several utilities designed to help you to
reconfigure your system to best meet your individual needs.
Together, these allow you to ascertain certain system details, set
additional options, or change default options. These utilities are
described in this chapter.

94

NOTE

❖ TOSHIBA Assist
❖ TOSHIBA Recovery Media Creator
❖ TOSHIBA Application Installer
❖ Supervisor password
❖ User password
❖ TOSHIBA Face Recognition Utility
❖ TOSHIBA PC Diagnostic Tool Utility
❖ Mouse Utility
❖ TOSHIBA Hardware Setup
❖ TOSHIBA Sleep Utility

The utilities described in this chapter, and the icons shown in the
sample images are applicable only if the related utility is available on
your system.

❖ TOSHIBA Accessibility
❖ TOSHIBA eco Utility™
❖ TOSHIBA Service Station
❖ TOSHIBA PC Health Monitor

TOSHIBA Assist

The TOSHIBA Assist provides quick access to computer functions
and allows you to customize a range of computer settings.

To access TOSHIBA Assist, click the Start button, and then in the
Search field, type TOSHIBA Assist. In the list that appears above,
click your selection.

The TOSHIBA Assist window appears.

Utilities

TOSHIBA Assist

95

(Sample Image) TOSHIBA Assist window

The TOSHIBA Assist offers four categories of options:

❖ Connect
❖ Secure
❖ Protect & Fix
❖ Optimize

96

Connect

Utilities

TOSHIBA Assist

The feature available in this category is Bluetooth® Settings.

(Sample Image) TOSHIBA Assist window – Connect tab

Secure

Utilities

TOSHIBA Assist

The features available in this category are:

❖ Supervisor password
❖ User password

(Sample Image) TOSHIBA Assist window – Secure tab

97

98

Protect & Fix

The feature available in this category is the TOSHIBA PC

Diagnostic Tool Utility.

(Sample Image) TOSHIBA Assist window – Protect & Fix tab

Utilities

TOSHIBA Assist

Optimize

Utilities

TOSHIBA Assist

The features available in this category are:

❖ Mouse Utility
❖ TOSHIBA Hardware Setup (Hardware Settings)
❖ TOSHIBA Accessibility
❖ TOSHIBA Face Recognition Utility
❖ TOSHIBA Sleep Utility
❖ TOSHIBA eco Utility™

99

(Sample Image) TOSHIBA Assist window – Optimize tab

100

Utilities

TOSHIBA Recovery Media Creator

TOSHIBA Recovery Media Creator

The TOSHIBA Recovery Media Creator utility enables you to
create recovery media that can be used to return your system to its
out-of-box state, if necessary. For detailed information on using the
utility to create recovery media, see “Creating recovery media” on

page 53.

TOSHIBA Application Installer

The TOSHIBA Application Installer allows you to reinstall the
drivers and applications that were originally bundled with your
computer.

To reinstall drivers and applications:

1 Click the Start button, and then in the Search field, type

TOSHIBA Application Installer. In the list that appears

above, click your selection.
The TOSHIBA Application Installer window appears.

2 Click Next.

(Sample Image) TOSHIBA Application Installer screen