Toshiba MQ04ABF100 User Manual

Client HDD MQ04AB Series Product Manual

HDD

SPECIFICATIONS

Rotation Speed

5,400 rpm

Buffer Size

128 MiB

[5]

Supply Voltage

Allowable Voltage

5 V

[7]

± 5%

Read / Write

[8]

1.65 W Typ.

Low Power Idle

[9]

0.60 W Typ.

Seek

24 dB Ave.

21 dB Ave.

KEY FEATURES

MQ04AB SERIES

Client HDD

Toshiba's MQ04AB Series 5,400 rpm HDDs deliver up to 2TB

[1]

of data storage

APPLICATIONS

capacity in 2.5-inch form factor . It is suitable f or ultra-portable la ptop and noteboo k PCs, as well as for use in slim-line “all-in-one” desktop PCs. Other uses include high-end multimedia devices where lo w-power and mobile-class robustness helps to achieve platform design requirements. The MQ04AB series leverage shock sensors to protect the drive from excessive shock events. The MQ04AB Series' quiet operation makes it an excellent storage solution for laptops, slim-line desktops, and applications where c apacity, power-profile, and reliabi lity are critical.

• Up to 2 TB of Storage Capacity

• 2.5-inch Slim Form Factor

• 5,400 rpm performance

• SATA up to 6.0 Gbit/s

• Advanced Format (AF) 512e Sector Technology

• MTTF

• Low Power Consumption Versus tradit i onal 3.5-

• Quiet Operation Versus traditional 3.5-inch

• Improved Performance with Native Command

• Optimize HDD Health with SMART

[4]

of 600,000 hours

inch desktop HDDs

desktop HDDs

Queue (NCQ)

[3]

• Ultrathin Notebooks, portable PCs

• Slim-line desktop and “all-in-one” PCs

• High-End Multimedia Devices

Product image may represent a design model.

Item

Interface SATA (1.5 Gbit/s, 3.0 Gbit/s, 6.0 Gbit/s) Formatted Capacity 2 TB 1 TB

Interface Speed 6.0 Gbit/s Max

Performance

Logical Data Block Length HOST: 512 B, DISK: 4,096 B

Power Consumption

Acoustics (Sound Power)

Average Latency Time 5.56 ms

For idle mode (Spindle is rotating)

MQ04ABD200 MQ04ABF100

23 dB Ave. 19 dB Ave.

[6]

1 / 13

Rev. 01: Feb, 2018

Client HDD MQ04AB Series Product Manual

ENVIRONMENTAL LIMITS

RELIABILITY

MODEL NUMBERS

Operating

0 °C to 60 °C

Operating

8 % to 90 % R.H. (No condensation)

Non-Operating

8 % to 90 % R.H. (No condensation)

Operating

3,920 m/s2 { 400 G } / 2 ms duration

Non-Operating

9,800 m/s2 { 1,000 G } / 2 ms duration

Non-Operating

49 m/s2 { 5 G } ( 15 to 500 Hz )

Operating

- 300 m to 3,000 m

Non-Operating

- 300 m to 12,000 m

MTTF

600,000 h

Non-recoverable Error Rate

1 error per 1014 bits read

Load / Unload

600,000 times

MQ04ABF100

SATA-3.3

1 TB

HOST: 512 B, DISK: 4,096 B

Item Specification

Temperature

Humidity

Shock

Vibration

Altitude

Non-Operating - 40 °C to 65 °C

Operating 9.8 m/s2 { 1 G } ( 5 to 500 Hz )

Item Specification

Model Number Interface Formatted Capacity Sector Format

MQ04ABD200 SATA-3.3 2 TB HOST: 512 B, DISK: 4,096 B

[1] Definition of capacity: Toshiba defines a megabyte (MB) as 1,000,000 bytes, a gigabyte (GB) as 1,000,000,000 bytes and a terabyte (TB) as 1,000,000,000,000

bytes. A computer operating system, however, reports storage capacity using powers of 2 for the definition of 1GB = 2 less storage capacity. Available storage capacity (including examples of various media files) will vary based on file size, formatting, settings, software and operating

system, such as Microsoft Operating System and/or pre-installed software applications, or media content. Actual formatted capacity may vary. [2] "2.5-inch" and "3.5-inch" mean the form factor of HDDs or SSDs. They do not indicate drive's physical size. [3] Read and write speed may vary depending on the host device, read and write conditions, and file size. [4] MTTF (Mean Time to Failure) is not a guarantee or estimate of product life; it is a statistical value related to mean failure rates for a large number of products which

may not accurately reflect actual operation. Actual operating life of the product may be di fferent from the MTTF. [5] A kibibyte (KiB) means 2 [6] Read–modify-write is supported. [7] When DC power is turned off, +5 V voltage must not be lower than 0 V. [8] The read/write current is specified based on three operations of 63 sector read/write per 100 ms. [9] The values are based on using S-ATA power management features. The Partial mode is used for the idle modes power consumption measurements and the

Slumber mode is used for Standby and Sleep modes power consumption measurements. Motor is rotati ng at normal speed but heads are unloaded on the ramp.

10

, or 1,024 bytes, a mebibyte (MiB) means 220, or 1,048,576 bytes, and a gibibyte (GiB) means 230, or 1,073,741,824 bytes.

30

= 1,073,741,824 bytes and therefore shows

2 / 13

Rev. 01: Feb, 2018

Client HDD MQ04AB Series Product Manual

MARKING

3 / 13

Rev. 01: Feb, 2018

Client HDD MQ04AB Series Product Manual

(Underwriters Laboratories)

(Canadian Standard Association)

(Technischer Überwachungs Verein)

(Bureau of Standards, Metrology and Inspection)

(Ministry of Science, ICT & Future Planning)

SAFETY / EMI STANDARDS

MQ04ABD200

MQ04ABF100

Title Region

UL

CSA

TÜV

BSMI

MSIP

ACMA

(Australian Communications and Media Authority)

USA

Canada

Germany

Taiwan

Korea

Australia

(Note 1) Marks of KC

MSIP-REM-TSD-MQ04ABD200 TOSHIBA ELECTRONIC DEVICES & STORAGE CORPORATION 2017-02

Made in Philippines

TOSHIBA ELECTRONIC DEVICES & STORAGE CORPORATION

MSIP-REM-TSD-MQ04ABF100 TOSHIBA ELECTRONIC DEVICES & STORAGE CORPORATION 2016-05 TOSHIBA ELECTRONIC DEVICES & STORAGE CORPORATION

Made in China

MSIP-REM-TSD-MQ04ABD200 TOSHIBA ELECTRONIC DEVICES & STORAGE CORPORATION 2017-02 TOSHIBA ELECTRONIC DEVICES & STORAGE CORPORATION

MSIP-REM-TSD-MQ04ABF100 TOSHIBA ELECTRONIC DEVICES & STORAGE CORPORATION 2016-05 TOSHIBA ELECTRONIC DEVICES & STORAGE CORPORATION

4 / 13

Rev. 01: Feb, 2018

Client HDD MQ04AB Series Product Manual

MECHANICAL SPECIFICATIONS

Width

Length

Weight

Figure.1 MQ04ABD200

Item MQ04ABD200 MQ04ABF100

69.85 mm

Height

9.5 mm 7.0 mm

100.0 mm

117 g M ax 92 g Max

5 / 13

Rev. 01: Feb, 2018

Client HDD MQ04AB Series Product Manual

[10]

Dimension

mm

{ Inch }

mm

{ Inch }

-0.305

-0.012

Table.1 MQ04ABD200

SFF-8200 Rev3.3

SFF-8201 Rev3.3 SFF-8223 Rev2.7

Toshiba S-ATA Model

(Differences only)

A1 9.5 0.374 A2 0.20 0.008 A3 0.20 0.008 A4 69.85 2.750

A5 0.25 0.010

[11]

A6

100.45 Max 3.955 Max 100.00 ±0.41 3.937 ±0.016 A7 3.50 0.137 A8 9.40 0.370 9.40 ±0.51 0.370 ±0.020 A10 －－ 30.125 ±0.28 1.186 ±0.011 A12 0.38 0.015 A23 3.00 0.118 3.00 ±0.20 0.118±0.007

A28 4.07 0.160

4.07 ＋0.295

0.160 +0.012

A29 61.72 2.430 61.72 ±0.25 2.430 ±0.010

[11]

A50

14.00 0.551 14.00 ±0.25 0.551 ±0.010

[11]

A51

90.60 3.576 90.60 ±0.30 3.567 ±0.012

[11]

A52

14.00 0.551 14.00 ±0.25 0.551 ±0.010

[11]

A53

90.60 3.567 90.60 ±0.30 3.567 ±0.012

[10] SFF-8200: Small Form Factor Standard. [11] PCA, Connector not included

6 / 13

Rev. 01: Feb, 2018

Client HDD MQ04AB Series Product Manual

Figure.2 MQ04ABF100

7 / 13

Rev. 01: Feb, 2018

Client HDD MQ04AB Series Product Manual

[10]

Dimension

mm

{ Inch }

mm

{ Inch }

-0.305

-0.012

Table.2 MQ04ABF100

SFF-8200 Rev3.3

SFF-8201 Rev3.3 SFF-8223 Rev2.7

Toshiba S-ATA Model

(Differences only)

A1 7.00 0.276 A2 0.20 0.008 A3 0.50 0.020 A4 69.85 2.750

A5 0.25 0.010

[11]

A6

100.45 Max 3.955 Max 100.00 ±0.41 3.937 ±0.016 A7 3.50 0.137 A8 9.40 0.370 9.40 ±0.51 0.370 ±0.020 A10 －－ 30.125 ±0.28 1.186 ±0.011 A12 0.38 0.015 A23 3.00 0.118 3.00 ±0.20 0.118±0.007

A28 4.07 0.160

4.07 ＋0.295

0.160 +0.012

A29 61.72 2.430 61.72 ±0.25 2.430 ±0.010

[11]

A50

14.00 0.551 14.00 ±0.25 0.551 ±0.010

[11]

A51

90.60 3.576 90.60 ±0.30 3.567 ±0.012

[11]

A52

14.00 0.551 14.00 ±0.25 0.551 ±0.010

[11]

A53

90.60 3.567 90.60 ±0.30 3.567 ±0.012

[10] SFF-8200: Small Form Factor Standard. [11] PCA, Connector not included

8 / 13

Rev. 01: Feb, 2018

Client HDD MQ04AB Series Product Manual

INTERFACE CONNECTOR

Power Segment P1

Signal Segment S1

9 / 13

Rev. 01: Feb, 2018

Client HDD MQ04AB Series Product Manual

INTERFACE CONNECTOR (SATA plug) SIGNAL ALLOCATION

S1

GND

2nd Mate

P3

V33

3.3 V Power Pre-Charge 2nd Mate (Unused)

nd

P6

GND

2nd Mate

P10

GND

2nd Mate

- Staggered Spin-up Mode Detect (Input)

- Activity LED Drive (Output)

P12

GND

1st Mate

Segment Pin No. Pin Definition

S2 A+ Differential Pair A from PHY ( Device Rx+ ) S3 A- Differential Pair A from PHY ( Device Rx- )

Signal Segment

S4 GND 2nd Mate S5 B- Differential Pair B from PHY ( Device Tx- ) S6 B+ Differential Pair B from PHY ( Device Tx+ ) S7 GND 2nd Mate

P1 V33 3.3 V Power (Unused) P2 V33 3.3 V Power (Unused)

P4 GND 1st Mate

Mate

P5 GND

2

P7 V5 5 V Power Pre-Charge 2nd Mate

Power Segment

P8 V5 5 V Power P9 V5 5 V Power

P11 Spin/ACT

P13 V12 12 V Power Pre-Charge 2nd Mate (Unused) P14 V12 12 V Power (Unused) P15 V12 12 V Power (Unused)

Notice: This drive uses 5V power only. 3.3V and 12V powe are not used.

HDA (Head Disk Assembly) and DC ground (ground pins on interface) are connected electrically each other.

10 / 13

Rev. 01: Feb, 2018

Client HDD MQ04AB Series Product Manual

COMMAND TABLE (Part 1)

Op-Code Command Name

E5h / 98h CHECK POWER MODE

B1h DEVICE CONFIGURATION

92h / 93h DOWNLOAD MICROCODE (DMA)

90h EXECUTE DIAGNO STICS

E7h FLUSH CACHE EAh FLUSH CACHE EXT ECh IDENTIFY DEVICE

E3h / 97h IDLE E1h / 95h IDLE IMMEDIATE

91h INITIALIZE DEVICE PARAMETERS

00h NOP

E4h READ BUFFER C8h READ DMA

25h READ DMA EXT

60h READ FPDMA QUEUED

2Fh READ LOG EXT

47h READ LOG DMA EXT C4h READ MULTIPLE

29h READ MULTIPLE EXT

F8h READ NATIVE MAX ADDRESS

27h READ NATIVE MAX ADDRESS EXT

20h READ SECTOR(s)

24h READ SECTOR(s) EXT

40h READ VERIFY SECTOR(s)

42h READ VERIFY SECTOR(S) EXT

11 / 13

Rev. 01: Feb, 2018

Client HDD MQ04AB Series Product Manual

COMMAND TABLE (Part 2)

Op-Code Command Name

1xh RECALIBRATE 0Bh REQUEST SENSE DATA EXT B4h SANITIZE DEVICE F1h SECURITY SET PASSWORD F2h SECURITY UNLOCK F3h SECURITY ERASE PREPARE F4h SECURITY ERASE UNIT F5h SECURITY FREEZE LOCK F6h SECURITY DISABLE PASSWORD

70h – 76h, 79h – 7Fh SEEK

77h SET DATE & TIME EXT

EFh SET FEATURES

F9h SET MAX 37h SET MAX ADDRESS EXT

C6h SET MULTIPLE MODE

E6h / 99h SLEEP

B0h SMART Function Set

E2h / 96h STANDBY E0h / 94h STANDBY IMMEDIATE

E8h WRITE BUFFER

CAh WRITE DMA

35h WRITE DMA EXT

3Dh WRITE DMA FUA EXT

61h WRITE FPDMA QUEUED 3Fh WRITE LOG EXT 57h WRITE LOG DMA EXT

C5h WRITE MULTIPLE

39h WRITE MULTIPLE EXT

CEh WRITE MULTIPLE FUA EXT

30h WRITE SECTOR(s) 34h WRITE SECTOR(s) EXT 45h WRITE UNCORRECTAB LE E XT

3Ch WRITE VERIFY

12 / 13

Rev. 01: Feb, 2018

Client HDD MQ04AB Series Product Manual

RESTRICTIONS ON PRODUCT USE

Toshiba Corporation and its subsidiaries and affiliates are collectively referred to as “TOSHIBA”. Hardware, software and systems described in this document are collectively referred to as “Product”.

• TOSHIBA reserves the right to make changes to the information in this document and related Product without notice.

• This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with TOSHIBA’s written

permission, reproduction is permissible only if reproduction is without alteration/omission.

• Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily injury or damage to property, including data loss or corruption. Before creating and producing designs and using, customers must also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes for Product and (b) the instructions for the application that Product will be used with or for. Customers are solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR APPLICATIONS.

• PRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIRE EXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH MAY CAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT ("UNINTENDED USE"). Except for specific

applications as expressly stated in this document, Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric power, and equipment used in finance-related fields. IF YOU USE PRODUCT FOR UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT. For details, please contact your TOSHIBA sales representative.

• Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.

• Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable

laws or regulations.

• The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.

• ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.

• Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology products (mass destruction weapons). Product and related software and technology may be controlled under the Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations.

• Product may include products subject to foreign exchange and foreign trade control laws.

• Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product. Please

use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of noncompliance with applicable laws and regulations.

13 / 13

Rev. 01: Feb, 2018

Toshiba MQ04ABF100 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual