Toshiba M205 User Manual

Download

Portégé® M200/M205 Series User’s Guide

If you need assistance:

❖ Toshiba’s Support Website

pcsupport.toshiba.com

❖ Toshiba Global Support Centre

Calling within the United States (800) 457-7777 Calling from outside the United States (949) 859-4273

For more information, see “If Something Goes Wrong” on

page 191 in this guide.

PMAD00024011 07/05

Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling.

Model: Portégé® M200/M205 Series

Recordable and/or ReWritable Drive(s) and Associated Software Warranty

The computer system you purchased may include Recordable and/or ReWritable optical media drive(s) and associated software, among the most advanced data storage technologies available. As with any new technology, you must read and follow all set-up and usage instructions in the applicable user guides and/or manuals enclosed or provided electronically. If you fail to do so, this product may not function properly and you may lose data or suffer other damage. TOSHIBA AMERICA INFORMATION SYSTEMS, INC. (“TOSHIBA”), ITS AFFILIATES AND SUPPLIERS DO NOT WARRANT THAT OPERATION OF THE PRODUCT WILL BE UNINTERRUPTED OR ERROR FREE. YOU AGREE THAT TOSHIBA, ITS AFFILIATES AND SUPPLIERS SHALL HAVE NO RESPONSIBILITY FOR DAMAGE TO OR LOSS OF ANY BUSINESS, PROFITS, PROGRAMS, DATA, NETWORK SYSTEMS OR REMOVABLE STORAGE MEDIA ARISING OUT OF OR RESULTING FROM THE USE OF THE PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY THEREOF.

Protection of Stored Data

For your important data, please make periodic back-up copies of all the data stored on the hard disk or other storage devices as a precaution against possible failures, alteration, or loss of the data. IF YOUR DATA IS ALTERED OR

LOST DUE TO ANY TROUBLE, FAILURE OR MALFUNCTION OF THE HARD DISK DRIVE OR OTHER STORAGE DEVICES AND THE DATA CANNOT BE RECOVERED, TOSHIBA SHALL NOT BE LIABLE FOR ANY DAMAGE OR LOSS OF DATA, OR ANY OTHER DAMAGE RESULTING THEREFROM. WHEN COPYING OR TRANSFERRING YOUR DATA, PLEASE BE SURE TO CONFIRM WHETHER THE DATA HAS BEEN SUCCESSFULLY COPIED OR TRANSFERRED. TOSHIBA DISCLAIMS ANY LIABILITY FOR THE FAILURE TO COPY OR TRANSFER THE DATA CORRECTLY.

Critical Applications

The computer you have purchased is not designed for any “critical applications.” “Critical applications” means life support systems, medical applications, connections to implanted medical devices, commercial transportation, nuclear facilities or systems or any other applications where product failure could lead to injury to persons or loss of life or catastrophic property damage.

ACCORDINGLY, TOSHIBA, ITS AFFILIATES AND SUPPLIERS DISCLAIM ANY AND ALL LIABILITY ARISING OUT OF THE USE OF THE COMPUTER PRODUCTS IN ANY CRITICAL APPLICATIONS. IF YOU USE THE COMPUTER PRODUCTS IN A CRITICAL APPLICATION, YOU, AND NOT TOSHIBA, ASSUME FULL RESPONSIBILITY FOR SUCH USE.

FCC Notice “Declaration of Conformity Information”

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

❖ Reorient or relocate the receiving antenna.

❖ Increase the separation between the equipment and receiver.

❖ Connect the equipment to an outlet on a circuit different from that to which

the receiver is connected.

❖ Consult the dealer or an experienced radio/TV technician for help.

NOTE

Only Peripherals complying with the FCC Class B limits may be attached to this equipment. Operation with noncompliant peripherals or peripherals not recommended by Toshiba is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and the computer's parallel port, monitor port, USB port, PS/2 port port and microphone jack. Changes or modifications made to this equipment not expressly approved by Toshiba or parties authorized by Toshiba could void the user's authority to operate the equipment.

, i.LINK®

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

❖ This device may not cause harmful interference.

❖ This device must accept any interference received, including interference

that may cause undesired operation.

Contact either:

❖ Toshiba’s Support Website at pcsupport.toshiba.com.

❖ Or call the Toshiba Global Support Centre:

Within the United States at (800) 457-7777 Outside the United States at (949) 859-4273

Industry Canada requirement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conformé à la norme NMB-003 du Canada.

FCC requirements

The following information is pursuant to FCC CFR 47, Part 68 and refers to internal modems.

This equipment complies with Part 68 of the FCC rules. On the bottom of this equipment is a label that contains, among other information, the FCC registration number and ringer equivalence number (REN) for this equipment. If requested, the information must be provided to the telephone company.

The modem connects to the telephone line by means of a standard jack called the USOC RJ11C.

A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC part 68 rules and requirements adopted by the ACTA. It is designed to be connected to a compatible modular jack that is also compliant.

The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company. For products approved after July 23, 2001, the REN for this product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits represented by the ## are the REN without a

decimal point (e.g., 03 is a REN of 0.3). For earlier products, the REN is separately shown on the label.

Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission or corporation commission for information.

Telephone Company Procedures

The goal of the telephone company is to provide you with the best service it can. In order to do this, it may occasionally be necessary for them to make changes in their equipment, operations or procedures. If these changes might affect your service or the operation of your equipment, the telephone company will give you notice, in writing, to allow you to make any changes necessary to maintain uninterrupted service.

If Problems Arise

If this equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But if advanced notice is not practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary.

If trouble is experienced with this equipment, for repair or limited warranty information, please contact Toshiba Corporation, Toshiba America Information Systems, Inc. or an authorized representative of Toshiba, or the Toshiba Support Centre within the United States at (800) 457-7777 or Outside the United States at (949) 859-4273. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved.

Disconnection

If you should ever decide to permanently disconnect your modem from its present line, please call the telephone company and let them know of this change.

Fax Branding

The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device, including Fax machines, to send any message unless such message clearly contains in a margin at the top or bottom of each transmitted page or on the first page of the transmission, the date and time it is sent and an identification of the business or other entity, or other individual sending the message and the telephone number of the sending machine or such business, other entity, or individual. (The telephone number

provided may not be a 900 number or any other number for which charges exceed local or long-distance transmission charges.)

In order to program this information into your fax transmission, refer to the fax software instructions installed on this computer.

Alarm Equipment

If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer.

Instructions for IC CS-03 Certified Equipment

1 NOTICE: The Industry Canada label identifies certified equipment.

This certification means that the equipment meets certain telecommunications network protective, operational and safety requirements as prescribed in the appropriate Terminal Equipment Technical Requirements document(s). The Department does not guarantee the equipment will operate to the user’s satisfaction.

Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment must also be installed using an acceptable method of connection. The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations.

Repairs to certified equipment should be coordinated by a representative designated by the supplier. Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the telecommunications company cause to request the user to disconnect the equipment.

Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas.

Caution: Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection authority, or electrician, as appropriate.

2 The user manual of analog equipment must contain the equipment’s

Ringer Equivalence Number (REN) and an explanation notice similar to the following:

The Ringer Equivalence Number (REN) of this device can be found on the label affixed to your computer.

NOTICE: The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed 5.

3 The standard connecting arrangement (telephone jack type) for this

equipment is jack type(s): USOC RJ11C.

Wireless Interoperability

The TOSHIBA Wireless LAN Mini PCI Card products are designed to be interoperable with any wireless LAN product that is based on Direct Sequence Spread Spectrum (DSSS) radio technology, and is compliant to:

❖ The IEEE 802.11 Standard on Wireless LANs (Revision A/B/G), as defined

and approved by the Institute of Electrical and Electronics Engineers.

❖ The Wireless Fidelity (Wi-Fi) certification as defined by the Wi-Fi Alliance.

The “Wi-Fi CERTIFIED” logo is a certification mark of the Wi-Fi Alliance.

Bluetooth® and Wireless LAN devices operate within the same radio

frequency range and may interfere with one another. If you use Bluetooth and Wireless LAN devices simultaneously, you may occasionally experience a less than optimal network performance or even lose your network connection.

If you should experience any such problem, immediately turn off your Bluetooth or Wireless LAN device.

Please contact Toshiba PC product support on Web site http://www.toshibaeurope.com/computers/tnt/bluetooth.htm in Europe or pcsupport.toshiba.com in the United States for more information.

This device is restricted to indoor use due to its operation in the 5.15 GHz to

5.25 GHz frequency range.

Wireless LAN and your Health

Wireless LAN products, like other radio devices, emit radio frequency electromagnetic energy. The level of energy emitted by Wireless LAN devices however is far much less than the electromagnetic energy emitted by wireless devices like for example mobile phones.

Because Wireless LAN products operate within the guidelines found in radio frequency safety standards and recommendations, TOSHIBA believes Wireless LAN is safe for use by consumers. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature.

In some situations or environments, the use of Wireless LAN may be restricted by the proprietor of the building or responsible representatives of the organization. These situations may for example include:

❖ Using the Wireless LAN equipment on board airplanes, or

❖ In any other environment where the risk of interference to other devices or

services is perceived or identified as harmful.

If you are uncertain of the policy that applies on the use of wireless devices in a specific organization or environment (e.g. airports), you are encouraged to ask for authorization to use the Wireless LAN device prior to turning on the equipment.

Regulatory Information

The TOSHIBA Wireless LAN Mini PCI Card must be installed and used in strict accordance with the manufacturer’s instructions as described in the user documentation that comes with the product. This device complies with the following radio frequency and safety standards.

Canada – Industry Canada (IC)

This device complies with RSS 210 of Industry Canada.

The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF field in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada’s Web site www.hc-sc.gc.ca/rpb. The RF device shall not be co-located with any other transmitter that has not been tested with this device.

Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device.

L’utilisation de ce dispositif est autorisée seulement aux conditions suivantes: (1) il ne doit pas produire de brouillage et (2) l’utilisateur du dispositif doit étre prêt à accepter tout brouillage radioélectrique reçu, même si ce brouillage est susceptible de compromettre le fonctionnement du dispositif.

The term “IC” before the equipment certification number only signifies that the Industry Canada technical specifications were met.

To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing.

Pour empecher que cet appareil cause du brouillage au service faisant l'objet d'une licence, il doit etre utilize a l'interieur et devrait etre place loin des fenetres afin de Fournier un ecram de blindage maximal. Si le matriel (ou son antenne d'emission) est installe a l'exterieur, il doit faire l'objet d'une licence.

This device is restricted to indoor use due to its operation in the 5.15 GHz to

5.25 GHz frequency range. Industry Canada requires this product to be used indoors for frequency range 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co-channel Mobile Satellite systems.

High power radars are allocated as primary users of the 5.25 GHz to 5.35 GHz and 5.65 GHz to 5.85 GHz bands. These radar stations can cause interference with and/or damage this device.

Europe – EU Declaration of Conformity

❖ This device complies with the essential requirements of the R&TTE

Directive 1999/5/EC with essential test suites as per standards:

EN 60950 Safety of Information Technology equipment.

ETS 300 328 Technical requirements for radio equipment.

ETS 300 826 General EMC requirements for radio equipment.

English: Hereby, TOSHIBA Corp. Digital Media Network Company, declares

that this Radio LAN device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

Finnish: Valmistaja TOSHIBA Corp. Digital Media Network Company

vakuuttaa täten että Radio LAN device tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen.

Dutch: Hierbij verklaart TOSHIBA Corp. Digital Media Network Company dat

het toestel Radio LAN device in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG.

Bij deze TOSHIBA Corp. Digital Media Network Company dat deze Radio LAN device voldoet aan de essentiële eisen en aan de overige relevante bepalingen van Richtlijn 1999/5/EC.

French: Par la présente TOSHIBA Corp. Digital Media Network Company

déclare que l'appareil Radio LAN device est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/ CE.

Par la présente, TOSHIBA Corp. Digital Media Network Company déclare que ce Radio LAN device est conforme aux exigences essentielles et aux autres dispositions de la directive 1999/5/CE qui lui sont applicables.

Swedish: Härmed intygar TOSHIBA Corp. Digital Media Network Company att

denna Radio LAN device står I överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.

Danish: Undertegnede TOSHIBA Corp. Digital Media Network Company

erklærer herved, at følgende udstyr Radio LAN device overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF

German: Hiermit erklärt TOSHIBA Corp. Digital Media Network Company, dass

sich dieser/diese/dieses Radio LAN device in Übereinstimmung mit den grundlegenden Anforderungen und den anderen relevanten Vorschriften der Richtlinie 1999/5/EG befindet. (BMWi)

Hiermit erklärt TOSHIBA Corp. Digital Media Network Company die Übereinstimmung des Gerätes Radio LAN device mit den grundlegenden Anforderungen und den anderen relevanten Festlegungen der Richtlinie 1999/5/EG. (Wien)

Greek:

Italian: Con la presente TOSHIBA Corp. Digital Media Network Company

dichiara che questo Radio LAN device è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.

Spanish: Por medio de la presente TOSHIBA Corp. Digital Media Network

Company declara que el Radio LAN device cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.

Portuguese: TOSHIBA Corp. Digital Media Network Company declara que este

Radio LAN device está conforme com os requisitos essenciais e outras disposições da Directiva 1999/5/CE.

USA – Federal Communications Commission (FCC)

This device complies with Part 15 of FCC Rules. Operation of the devices in a Wireless LAN System is subject to the following two conditions:

❖ This device may not cause harmful interference. ❖ This device must accept any interference that may cause undesired

operation.

TOSHIBA is not responsible for any radio or television interference caused by unauthorized modification of the devices included with this TOSHIBA Wireless LAN Mini PCI Card, or the substitution or attachment of connecting cables and equipment other than specified by TOSHIBA.

The correction of interference caused by such unauthorized modification, substitution or attachment will be the responsibility of the user.

Exposure to Radio Frequency Radiation

The radiated output power of the TOSHIBA Wireless LAN Mini PCI Card is far below the FCC radio frequency exposure limits. Nevertheless, the TOSHIBA Wireless LAN Mini PCI Card shall be used in such a manner that the potential for human contact during normal operation is minimized. In normal operating configuration, the LCD in the upright position, the distance between the antenna and the user should not be less than 20 cm. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Antenna(s) used in 5.15 GHz to 5.25 GHz frequency band must be integral antenna which provide no access to the end user.

Refer to the Regulatory Statements as identified in the documentation that comes with those products for additional information.

Radio Frequency Interference Requirements

This device is restricted to indoor use due to its operation in the 5.15 GHz to

5.25 GHz frequency range. FCC requires this product to be used indoors for frequency range 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co-channel Mobile Satellite systems.

High power radars are allocated as primary users of the 5.25 GHz to 5.35 GHz and 5.65 GHz to 5.85 GHz bands. These radar stations can cause interference with and/or damage this device.

NOTE

The above Caution information applies to products that operate with an

802.11a device.

Taiwan

Article 14 Unless approved, for any model accredited low power radio frequency

electric machinery, any company, trader or user shall not change the frequency, increase the power or change the features and functions of the original design.

Article 17 Any use of low power radio frequency electric machinery shall not affect

aviation safety and interfere with legal communications. In the event interference is caused, the use of such electric machinery shall be immediately discontinued. Operation of such products can be resumed only when they are modified and can no longer cause interference.

The legal communications mentioned in the above item refer to radio communications operated in accordance with telecommunication laws and regulations.

Low power radio frequency electric machinery shall resist against interference from legal communications or from industrial, scientific and medical radio emission electric machinery.

Using this Equipment in Japan

In Japan, the frequency bandwidth of 2,400 MHz to 2,483.5 MHz for second generation low-power data communication systems such as this equipment overlaps that of mobile object identification systems (premises radio station and specified low-power radio station).

1. Sticker

Please put the following sticker on devices incorporating this product.

2. Indication The indication shown below appears on this equipment.

(3)

(1) (2)

2.4DSOF4

(4)

1 2.4: This equipment uses a frequency of 2.4 GHz. 2 DS: This equipment uses DS-SS modulation.

OF: This equipment uses OFDM modulation.

3 The interference range of this equipment is less than 40m. 4 This equipment uses a frequency bandwidth from

2,400 MHz to 2,483.5 MHz. It is possible to avoid the band of mobile object identification systems.

3. TOSHIBA Direct PC

Monday – Friday: 10:00 – 17:00

Toll Free Tel: 0120-13-1100

Direct Dial: 03-3457-5916

Fax: 03-5444-9450

Device Authorization

This device obtains the Technical Regulation Conformity Certification and the Technical Conditions Compliance Approval, and it belongs to the device class of radio equipment of low-power data communication system radio station stipulated in the Radio Law and the Telecommunications Business Law of Japan.

The Name of the radio equipment: refer to the equipment label provided on the computer

JAPAN APPROVALS INSTITUTE FOR TELECOMMUNICATIONS EQUIPMENT

Approval Number: D01-1128JP

TELECOM ENGINEERING CENTER Approval Number: 03NY.A0018, 03GZDA0017

The following restrictions apply:

❖ Do not disassemble or modify the device. ❖ Do not install the embedded wireless module into other device. ❖ 5.17 GHz to 5.23 GHz for indoor use only.

Radio approvals for wireless devices

NOTE

The following information is dependent on what type of wireless device is in your computer.

Approved Countries/Regions for use for the Atheros AR5BMB-43/44 Mini PCI Wireless network adapter

This equipment is approved to the radio standard by the countries/regions in the following table.

Do not use this equipment except in the countries/regions in the following table.

NOTE

This device works on passive scan only.

A peer-to-peer mode is not available in 802.11a and Turbo Mode.

802.11b (2.4 GHz)

Australia Austria Belgium Canada Denmark Finland France Germany Greece Ireland Italy Liechtenstein Luxembourg Netherlands New Zealand Norway Portugal Sweden Switzerland UK USA

Europe - Restrictions for use of 2.4 GHz Frequencies in European Community Countries

België/ Belgique:

Deutschland: License required for outdoor installations. Check with reseller for

France: Restricted frequency band: only channels 1 to 7 (2400 MHz and 2454

Italia: License required for indoor use. Use with outdoor installations not

For private usage outside buildings across public grounds over less than 300m no special registration with IBPT/BIPT is required. Registration to IBPT/BIPT is required for private usage outside buildings across public grounds over more than 300m. For registration and license please contact IBPT/BIPT.

Voor privé-gebruik buiten gebouw over publieke groud over afstand kleiner dan 300m geen registratie bij BIPT/IBPT nodig; voor gebruik over afstand groter dan 300m is wel registratie bij BIPT/IBPT nodig. Voor registratie of licentie kunt u contact opnemen met BIPT.

Dans le cas d’une utilisation privée, à l’extérieur d’un bâtiment, audessus d’un espace public, aucun enregistrement n’est nécessaire pour une distance de moins de 300m. Pour une distance supérieure à 300m un enregistrement auprès de I’IBPT est requise. Pour les enregistrements et licences, veuillez contacter I’IBPT.

procedure to follow. Anmeldung im Outdoor-Bereich notwendig, aber nicht

genehmigungspflichtig.Bitte mit Händler die Vorgehensweise abstimmen.

MHz respectively) may be used outdoors in France. Please contact A.R.T. (http://www.art-telecom.fr) for applicable procedures to follow.

Bande de fréquence restreinte: seuls les canaux 1- 7 (2400 et 2454 MHz respectivement) doivent être utilisés endroits extérieur en France. Vous pouvez contacter I’Autorité de Régulation des Télécommuniations (http://www.art-telecom.fr) pour la procédure à suivre.

allowed.

E’necessaria la concessione ministeriale anche per l’uso interno.

Verificare con i rivenditori la procedura da seguire.

Nederland: License required for outdoor installations. Check with reseller for

procedure to follow. Licentie verplicht voor gebruik met buitenantennes. Neem contact op

met verkoper voor juiste procedure.

802.11a (5 GHz)

Australia Austria Belgium Canada Denmark Finland France Germany Greece Ireland Italy Liechtenstein Luxembourg Netherlands New Zealand Norway Portugal Sweden Switzerland UK USA

Turbo Mode (5 GHz)

Canada USA

Europe - Restrictions for use of 5 GHz Frequencies in European Community Countries

European Community Countries

Austria O x x Belgium, France,

Switzerland/Lichtenstein Denmark, Finland,

Germany, Greece, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Sweden, UK

Iceland, Spain O O O

O: allowed ×: forbidden

5150-5250 MHz

Channels: 36, 40, 44,

Indoor Only

OO x

OO O

5250-5350 MHz

Channels: 52, 56, 60,

Indoor Only

5470-5725 MHz

Channels: 100, 104, 108, 112,

116, 120, 124, 128, 132, 136, 140

Indoor/Outdoor

❖ To remain in conformance with European spectrum usage laws for Wireless

LAN operation, the above 2.4 GHz and 5 GHz channel limitations apply. The user should use the wireless LAN utility to check the current channel of operation. If operation is occurring outside of the allowable frequencies as listed above, the user must cease operating the Wireless LAN at that location and consult the local technical support staff responsible for the wireless network.

❖ The 5 GHz Turbo mode feature is not allowed for operation in any

European Community country.

❖ This device must not be operated in ad-hoc mode using channels in the

5 GHz bands in the European Community. Ad-hoc mode provides a direct communication between two client devices without a Wireless LAN Access Point.

❖ This device must be used with Access Points that have employed and

activated a radar detection feature required for European Community operation in the 5 GHz bands. This device will operate under the control of the Access Point in order to avoid operating on a channel occupied by any radar system in the area. The presence of nearby radar operation may result in temporary interruption of operation of this device. The Access Point’s radar detection feature will automatically restart operation on a channel free of radar. You may consult with the local technical support staff responsible for the wireless network to ensure the Access Point device(s) are properly configured for European Community operation.

Approved Countries/Regions for use for the Atheros AR5001X Mini PCI Wireless network adapter

This equipment is approved to the radio standard by the countries/regions in the following table.

Do not use this equipment except in the countries/regions in the following table.

NOTE

This device works on passive scan only.

A peer-to-peer mode is not available in 802.11a and Turbo Mode.

802.11b (2.4 GHz)

Australia Austria Belgium Canada Denmark Finland France Germany Greece Ireland Italy Liechtenstein Luxembourg Netherlands New Zealand Norway Portugal Sweden Switzerland UK USA

802.11a (5 GHz)

Australia Austria Belgium Canada Denmark Finland France Germany Greece Ireland Italy Liechtenstein Luxembourg Netherlands New Zealand Norway Portugal Sweden Switzerland UK USA

Turbo Mode (5 GHz)

Canada USA

Approved Countries/Regions for use for the Intel® PRO/ Wireless LAN 2100 3B Mini PCI Adapter

This equipment is approved to the radio standard by the countries/regions in the following table.

Do not use this equipment except in the countries/regions in the following table.

Argentina Australia Austria Belgium Brazil Canada Chile Denmark Finland France Germany Greece Iceland Ireland Italy Japan Liechtenstein Luxembourg

Mexico Netherlands New Zealand Norway Peru Portugal Singapore Spain Sweden Switzerland UK Uruguay USA Venezuela

Approved Countries/Regions for use for the Toshiba Mini PCI Wireless LAN Card

This equipment is approved to the radio standard by the countries/regions in the following table.

Do not use this equipment except in the countries/regions in the following table.

Australia Austria Belgium Canada Denmark Finland France Germany Greece Hong Kong Iceland Ireland Italy Japan Liechtenstein Luxembourg Malaysia Netherlands New Zealand Norway Philippines Portugal Singapore Spain Sweden Switzerland Thailand UK USA

Approved Countries/Regions for use for the INPROCOMM IPN2220 Wireless network adapter

This equipment is approved to the radio standard by the countries/regions in the following table.

Do not use this equipment except in the countries/regions in the following table.

EU Canada Japan USA Australia New Zealand

Bluetooth® wireless technology Interoperability

Bluetooth® Cards from TOSHIBA are designed to be interoperable with any

product with Bluetooth wireless technology that is based on Frequency Hopping Spread Spectrum (FHSS) radio technology, and is compliant to:

❖ Bluetooth Specification as defined and approved by The Bluetooth Special

Interest Group.

❖ Logo certification with Bluetooth wireless technology as defined by The

Bluetooth Special Interest Group.

Bluetooth wireless technology is a new innovative technology, and TOSHIBA has not confirmed compatibility of its Bluetooth products with all PCs and/or equipment using Bluetooth wireless technology other than TOSHIBA portable computers.

Always use Bluetooth cards from TOSHIBA in order to enable wireless networks over two or more (up to a total of seven) TOSHIBA portable computers using these cards. Please contact TOSHIBA PC product support on Web site http://www.toshiba-europe.com/computers/tnt/bluetooth.htm in Europe or pcsupport.toshiba.com in the United States for more information.

When you use Bluetooth cards from TOSHIBA close to 2.4 GHz Wireless LAN devices, Bluetooth transmissions might slow down or cause errors. If you detect certain interference while you use Bluetooth cards from TOSHIBA, always change the frequency, move your PC to the area outside of the interference range of 2.4 GHz Wireless LAN devices (40 meters/43.74 yards or more) or stop transmitting from your PC. Please contact TOSHIBA PC product support on Web site http://www.toshiba-europe.com/computers/tnt/ bluetooth.htm in Europe or pcsupport.toshiba.com in the United States for more information.

Bluetooth and Wireless LAN devices operate within the same radio frequency range and may interfere with one another. If you use Bluetooth and Wireless LAN devices simultaneously, you may occasionally experience a less than optimal network performance or even lose your network connection. If you should experience any such problem, immediately turn off either one of your Bluetooth or Wireless LAN. Please contact Toshiba PC product support on Web site http://www.toshiba-europe.com/computers/tnt/bluetooth.htm in Europe or pcsupport.toshiba.com in the United States for more information.

Bluetooth® wireless technology and your Health

The products with Bluetooth wireless technology, like other radio devices, emit radio frequency electromagnetic energy. The level of energy emitted by devices with Bluetooth wireless technology however is far much less than the electromagnetic energy emitted by wireless devices like for example mobile phones.

Because products with Bluetooth wireless technology operate within the guidelines found in radio frequency safety standards and recommendations, TOSHIBA believes Bluetooth wireless technology is safe for use by consumers. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature.

In some situations or environments, the use of Bluetooth wireless technology may be restricted by the proprietor of the building or responsible representatives of the organization. These situations may for example include:

❖ Using the equipment with Bluetooth wireless technology on board

airplanes, or

❖ In any other environment where the risk of interference to other devices or

services is perceived or identified as harmful.

If you are uncertain of the policy that applies on the use of wireless devices in a specific organization or environment (e.g. airports), you are encouraged to ask for authorization to use the device with Bluetooth wireless technology prior to turning on the equipment.

Regulatory statements

This product complies with any mandatory product specification in any country/ region where the product is sold. In addition, the product complies with the following:

European Union (EU) and EFTA

This equipment complies with the R&TTE directive 1999/5/EC and has been provided with the CE mark accordingly.

Canada — Industry Canada (IC)

This device complies with RSS 210 of Industry Canada.

L’utilisation de ce dispositif est autorisée seulement aux conditions suivantes: (1) il ne doit pas produire de brouillage et (2) l’utilisateur du dispositif doit étre prét à accepter tout brouillage radioélectrique reçu, même si ce brouillage est susceptible de compromettre le fonctionnement du dispositif.

The term “IC” before the equipment certification number only signifies that the Industry Canada technical specifications were met.

FCC Interference Statement

This device complies with part15 of the FCC rules. Operation is subject to the following two conditions:

• This device may not cause harmful interference, and

• This device must accept any interference received, including interference that may cause undesired operation.

Note that any changes or modifications to this equipment not expressly approved by the manufacturer may void the authorization to operate this equipment.

Exposure to Radio Frequency Radiation

The radiated output power of the Bluetooth Card from TOSHIBA is far below the FCC radio frequency exposure limits. Nevertheless, the Bluetooth Card from TOSHIBA shall be used in such a manner that the potential for human contact during normal operation is minimized.

In order to comply with FCC radio-frequency radiation exposure guidelines for an uncontrolled environment, the Bluetooth Card from TOSHIBA has to be operated while maintaining a minimum body to antenna distance of 20 cm.

Refer to the Regulatory Statements as identified in the documentation that comes with those products for additional information.

The Bluetooth Card from TOSHIBA is far below the FCC radio frequency exposure limits.

Nevertheless, it is advised to use the Bluetooth Card from TOSHIBA in such a manner that human contact during normal operation is minimized.

NOTE

Changes or modifications made to this equipment not expressly approved by TOSHIBA or parties authorized by TOSHIBA could void the user’s authority to operate the equipment.

Taiwan

Article 14 Unless approved, for any model accredited low power radio frequency

electric machinery, any company, trader or user shall not change the frequency, increase the power or change the features and functions of the original design.

Article 17 Any use of low power radio frequency electric machinery shall not affect

The legal communications mentioned in the above item refer to radio communications operated in accordance with telecommunication laws and regulations.

Low power radio frequency electric machinery shall resist against interference from legal communications or from industrial, scientific and medical radio emission electric machinery.

Using this equipment in Japan

1. Sticker

Please put the following sticker on devices incorporating this product.

2. Indication

The indication shown below appears on this equipment.

(1) (2)

(3)

2.4FH1

(4)

1 2.4: This equipment uses a frequency of 2.4 GHz. 2 FH: This equipment uses FH-SS modulation. 3 The interference range of this equipment is less than 10m. 4 This equipment uses a frequency bandwidth from 2,400 MHz to

2,483.5 MHz. It is impossible to avoid the band of mobile object identification systems.

3. TOSHIBA Direct PC

Monday – Friday: 10:00 – 17:00

Toll Free Tel: 0120-13-1100

Direct Dial: 03-3457-5916

Fax: 03-5444-9450

Device Authorization

This device obtains the Technical Regulation Conformity Certification, and it belongs to the device class of radio equipment of low-power data communication system radio station stipulated in the Radio Law of Japan.

The Name of the radio equipment: EYXF2CS

TELECOM ENGINEERING CENTER

Approval Number: 01NYDA1305

The following restrictions apply:

❖ Do not disassemble or modify the device.

❖ Do not install the embedded wireless module into other device.

DVD-ROM, multi-function drive safety instructions

The DVD-ROM and multi-function drives employ a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference.

Never attempt to disassemble, adjust or repair a CD/DVD drive, CD-RW drive, Multi-drive or any other optical drive. You could damage the drive. You would also be exposed to laser light or other safety hazards, resulting in serious injury. Always contact an authorized Toshiba service provider, if any repair or adjustment is required.

Location of the required label

(Sample shown below. Location of the label and manufacturing information may vary.)

This appliance contains a laser system and is classified as a CLASS 1 LASER PRODUCT. To use this model properly, read the user’s guide carefully and keep it for your future reference.

This guide is copyrighted by Toshiba America Information Systems, Inc. with all rights reserved. Under the copyright laws, this guide cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed, however, with respect to the use of the information contained herein.

Export Administration Regulation

This document contains technical data that may be controlled under the U.S. Export Administration Regulations, and may be subject to the approval of the U.S. Department of Commerce prior to export. Any export, directly or indirectly, in contravention of the U.S. Export Administration Regulations is prohibited.

Notice

The information contained in this manual, including but not limited to any product specifications, is subject to change without notice.

TOSHIBA CORPORATION AND TOSHIBA AMERICA INFORMATION SYSTEMS, INC. (TOSHIBA) PROVIDES NO WARRANTY WITH REGARD TO THIS MANUAL OR ANY OTHER INFORMATION CONTAINED HEREIN AND HEREBY EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE WITH REGARD TO ANY OF THE FOREGOING. TOSHIBA ASSUMES NO LIABILITY FOR ANY DAMAGES INCURRED DIRECTLY OR INDIRECTLY FROM ANY TECHNICAL OR TYPOGRAPHICAL ERRORS OR OMISSIONS CONTAINED HEREIN OR FOR DISCREPANCIES BETWEEN THE PRODUCT AND THE MANUAL. IN NO EVENT SHALL TOSHIBA BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, SPECIAL, OR EXEMPLARY DAMAGES, WHETHER BASED ON TORT, CONTRACT OR OTHERWISE, ARISING OUT OF OR IN CONNECTION WITH THIS MANUAL OR ANY OTHER INFORMATION CONTAINED HEREIN OR THE USE THEREOF.

Trademarks

Portégé is a registered trademark, FreedomWare, and SmartMedia are trademarks, of Toshiba America Information Systems, Inc. and/or Toshiba Corporation.

Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and/or other countries.

DirectX, Active Desktop, DirectShow, and Windows Media are registered trademarks of Microsoft Corporation.

ConfigFree is a trademark of Toshiba Corporation.

Wi-Fi is a registered trademark of the Wi-Fi Alliance.

Dolby - Manufactured by Toshiba under license from Dolby Laboratories/ Dolby and the double-D symbol are trademarks of Dolby Laboratories.

TouchPad is a trademark of Synaptics, Inc.

Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Toshiba is under license. Other trademarks and trade names are those of their respective owners.

All other brand and product names are trademarks or registered trademarks of their respective companies.

Computer disposal information

This product contains mercury. Disposal of this material may be regulated due to environmental considerations. For disposal, reuse or recycling information, please contact your local government or the Electronic Industries Alliance at

www.eiae.org.

Introduction ...............................................................37

This guide ...............................................................38

Safety icons ............................................................39

Other icons used...............................................40

Other documentation ..............................................40

Service options .......................................................41

Chapter 1: Getting Started..........................................42

Selecting a place to work ........................................42

Creating a computer-friendly environment........42

Keeping yourself comfortable ...........................43

Precautions.......................................................43

Important information on your computer’s

cooling fan ..................................................46

Setting up your computer .......................................46

Setting up your software...................................47

Registering your computer with Toshiba ................48

Adding external devices ..........................................48

Connecting to a power source ................................49

Charging the main battery.......................................52

Contents

Using the computer for the first time......................53

Opening the display panel.................................53

Your computer’s features and specifications ....54

Turning on the power........................................54

Adding memory ......................................................55

Installing a memory module .............................56

Removing a memory module............................60

Checking total memory .....................................62

Connecting an external USB mouse........................62

Connecting an external USB keyboard ....................63

Connecting a printer ...............................................63

Setting up a printer ...........................................64

Connecting the modem...........................................65

Connecting to a phone line ..............................66

Connecting to a network .........................................67

Using the TouchPad™.............................................67

Primary and secondary control buttons............67

Disabling or enabling the TouchPad .................68

Using the Cross-Functional button..........................70

Turning off the computer ........................................70

Closing the display panel ..................................71

Different ways to turn the computer on and off 71

Using your computer in tablet mode.......................72

Customizing your computer’s settings..............74

Caring for your computer........................................74

Cleaning the computer......................................74

Moving the computer........................................75

Using a computer lock ......................................75

Contents

Chapter 2: Learning the Basics...................................77

Computing tips .......................................................77

Using the keyboard .................................................78

Character keys .................................................79

Making your keyboard emulate a full-size

keyboard .....................................................79

Ctrl, Fn, and Alt keys .........................................80

Function keys....................................................80

Windows

Overlay keys .....................................................81

Starting a program..................................................83

Saving your work....................................................84

Saving files .......................................................84

Printing your work ..................................................86

Backing up your work .............................................87

Restoring your work .........................................87

Playing audio .........................................................88

Powering down the computer.................................90

Turn Off or Shut down command .....................90

Restart command .............................................91

Hibernation command ......................................91

Standby command............................................92

Using Turn Off or Shut down ..................................92

Turning off more quickly...................................93

Starting again after Turn Off or Shut down .......95

Using Hibernation ...................................................95

Enabling the Hibernation command ..................95

Going into Hibernation mode ............................95

Going into Hibernation mode more quickly.......96

Starting again from Hibernation........................98

Using Standby ........................................................98

Going into Standby mode more quickly ............99

Starting again from Standby ...........................101

special keys.....................................81

Contents

Toshiba’s online resources ...................................101

Chapter 3: Mobile Computing .................................. 102

Toshiba’s energy-saver design..............................102

Running the computer on battery power ..............102

Battery Notice .................................................103

Power management ........................................104

Using additional batteries ...............................104

Charging batteries.................................................105

Charging the main battery...............................105

Charging the RTC battery................................106

Monitoring main battery power.............................107

Determining remaining battery power.............109

What to do when the main battery runs low ...111

Setting battery alarms.....................................111

Conserving battery power ..............................112

Power Profiles ................................................113

Using a hot key to set the Power Profile .........114

Changing the main battery ....................................115

Removing the battery from the computer .......115

Inserting a charged battery .............................118

Taking care of your battery ...................................119

Safety precautions ..........................................119

Maximizing battery life....................................120

Disposing of used batteries ..................................121

Traveling tips ........................................................122

Chapter 4: Expansion Options.................................. 123

Using your computer at the office.........................123

Using an optional external DVD-ROM drive ..........124

Connecting an optional external DVD drive.....124

Inserting discs (CD or DVD) ...........................125

Removing discs (CD or DVD) ........................126

Contents

Caring for CDs and DVDs................................127

Using external display devices ..............................128

Directing the display output when you

turn on the computer ................................128

Adjusting the quality of the external display....129

Display limitations ..........................................130

Using tablet mode.................................................130

Preparing to use the tablet..............................131

Using tablet mode...........................................132

Using the Toshiba tablet pen...........................134

Returning the computer to its original

configuration.............................................135

Using the i.LINK® port ..........................................135

Using PC Cards.....................................................135

Inserting a PC Card.........................................136

Removing a PC Card.......................................137

Hot swapping PC Cards ..................................137

Using an optional SD™ card .................................138

Installing SD™ card drivers.............................138

Installing the SD™card in the SD slot .............139

Formatting an optional SD™ card ...................139

Using Standby or Hibernate while using the

SD™ card..................................................139

Removing an optional SD™ card ....................140

Chapter 5: Exploring Your Computer’s Features.......141

Windows® XP special features..............................141

Personalizing your desktop...................................142

Customizing the taskbar .................................142

Bringing the world to your desktop.................143

Changing desktop and browsing style ............144

Personalizing individual windows ...................145

Customizing window toolbars.........................146

Displaying information about each folder .......147

Contents

Setting up for communications.............................148

Determining the COM port .............................149

Using the Ethernet LAN Port ...........................150

Accessing a LAN .............................................151

Using wireless LAN connectivity.....................151

An overview of using the Internet .........................152

The Internet ....................................................152

The World Wide Web ......................................152

Internet Service Providers...............................153

Connecting to the Internet ..............................153

Surfing the Internet.........................................154

Internet features..............................................154

Uploading to, and downloading files from,

the Internet ...............................................155

Using audio features .............................................155

Using external speakers or headphones..........155

Recording sounds...........................................156

Using a microphone........................................157

Adjusting recording settings ...........................158

Chapter 6: Toshiba Utilities ......................................159

Fn-esse .................................................................160

Starting Fn-esse..............................................160

Assigning a key to a program or document ....161

Viewing existing key assignments ..................163

Changing or removing existing key

assignments .............................................164

Hotkey utility.........................................................164

TOSHIBA Console .................................................165

Customize Your Computer..............................166

Network ..........................................................166

Security...........................................................166

Power Management ..............................................167

Toshiba Hardware Setup.................................169

Contents

The Toshiba Rotation Utility..................................170

Cross Menu Utility ................................................174

TOSHIBA Tablet Access Code Utility .....................176

TOSHIBA Zooming Utility......................................177

TOSHIBA SD Memory Card Format.......................178

TOSHIBA SD Memory Boot Utility.........................179

Chapter 7: Keeping Your Files Safe .......................... 181

Using passwords in the Windows®

operating system ...........................................181

User-level passwords .....................................182

Setting a user-level password.........................182

Disabling the user-level password .................183

Using the power-on (user-level) password .....184

Using the instant (user-level) password..........184

Using the HDD password................................184

Setting a hard disk drive user only

password in System Setup .......................185

Deleting or changing a hard disk drive

user only password in System Setup........186

Setting a hard disk drive master and

user password in System Setup ...............187

Changing the master and user passwords

in System Setup........................................189

Deleting the hard disk drive master and user

passwords in the System Setup................190

Chapter 8: If Something Goes Wrong ...................... 191

Problems that are easy to fix ................................191

Problems when you turn on the computer............193

The Windows

Using Startup options to fix problems ............196

Internet problems ...........................................197

operating system is not working..195

Contents

The Windows® XP operating system can

help you ....................................................197

Resolving a hardware conflict...............................198

A plan of action...............................................198

Resolving hardware conflicts on your own .....199

Fixing a problem with Device Manager ...........200

Memory problems ..........................................202

Power and the batteries ..................................203

Keyboard problems.........................................205

Display problems ............................................206

Disk drive problems........................................208

DVD-ROM or multi-function drive problems...211

Sound system problems .................................212

PC Card problems...........................................212

Printer problems.............................................216

Modem problems............................................217

Wireless networking problems .......................218

DVD operating problems.......................................221

Develop good computing habits ...........................224

Data and system configuration backup in

Windows XP .............................................225

If you need further assistance...............................231

Before you contact Toshiba ............................231

Contacting Toshiba .........................................232

Other Toshiba Internet Web sites .........................233

Toshiba’s worldwide offices..................................233

Appendix A: Hot Keys...............................................235

Volume Mute ........................................................235

Password security ................................................236

Without a password........................................236

With a password .............................................236

Maintaining security when the battery is not fully

charged.....................................................237

Contents

Power usage mode ..............................................238

Standby mode.......................................................238

Hibernation mode ................................................239

Display modes ......................................................240

Display brightness ................................................240

Disabling or enabling wireless devices .................241

Disabling or enabling the TouchPad .....................241

Keyboard hot keys ...............................................242

Zooming applications in/out .................................242

Appendix B: Power Cord/Cable Connectors ............. 243

USA and Canada .............................................243

United Kingdom ..............................................243

Australia..........................................................243

Europe ............................................................243

Appendix C: Using ConfigFree™ with your

Toshiba Computer ............................... 244

Getting Started......................................................245

Starting ConfigFree .........................................245

ConfigFree Utilities................................................247

Connectivity Doctor ........................................247

Search for Wireless Devices ...........................250

Profile Settings ...............................................255

ConfigFree SUMMIT........................................259

Quick Connect.................................................263

Using the Automatic Switch..................................266

Semi-Automatic Switch Feature............................266

Glossary .................................................................. 268

Index........................................................................ 283

Introduction

Welcome to the world of powerful, portable, multimedia computing. With your Toshiba notebook computer, your work and entertainment can accompany you wherever you go.

You will find your operating system, Microsoft XP Tablet PC Edition, already installed on your computer. Your operating system offers exciting features, multimedia enjoyment, and easy Internet access.

Windows®

NOTE

Certain Microsoft® software product(s) included with this computer may use technological measures for copy protection. IN SUCH EVENT, YOU WILL NOT BE ABLE TO USE THE PRODUCT IF YOU DO NOT FULLY COMPLY WITH THE PRODUCT ACTIVATION PROCEDURES. Product activation procedures and Microsoft's privacy policy will be detailed during initial launch of the product, or upon certain reinstallations of the software product(s) or reconfigurations of the computer, and may be completed by Internet or telephone (toll charges may apply).

Some software may differ from its retail version (if available), and may not include user manuals or all program functionality.

Introduction

This guide

NOTE

This guide

This guide introduces the computer’s features. You can:

❖ Read the entire guide from beginning to end. ❖ Skim through and stop when a topic interests you. ❖ Use the table of contents and the index to find specific

information.

The product specifications and configuration information are designed for a product Series. Your particular model may not have all the features and specifications listed or illustrated. For more detailed information about the features and specifications on your particular model, please visit Toshiba's Web site at pcsupport.toshiba.com.

While Toshiba has made every effort at the time of publication to ensure the accuracy of the information provided herein, product specifications, configurations, prices, system/ component/options availability are all subject to change without notice. For the most up-to-date product information about your computer, or to stay current with the various computer software or hardware options, visit Toshiba’s Web site at pcsupport.toshiba.com.

Safety icons

This manual contains safety instructions that must be observed to avoid potential hazards that could result in personal injuries, damage to your equipment, or loss of data. These safety cautions have been classified according to the seriousness of the risk, and icons highlight these instructions as follows:

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Introduction

Safety icons

NOTE

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, may result in property damage.

Provides important information.

Introduction

Service options

Toshiba offers a full line of optional service programs to complement its limited warranty. Toshiba's standard limited warranty, extended warranty, and service upgrade terms and conditions are available at www.warranty.toshiba.com.

To stay current on the most recent software and hardware options for your computer, and for other product information, be sure to regularly check the Toshiba Web site at

pcsupport.toshiba.com.

If you have a problem or need to contact Toshiba, see “If

Something Goes Wrong” on page 191.

Introduction

Service options

Chapter 1

Getting Started

This chapter provides tips for working comfortably, summarizes how to connect components, and explains what to do the first time you use your notebook computer.

Selecting a place to work

Your computer is portable and designed to be used in a variety of circumstances and locations.

Creating a computer-friendly environment

Place the computer on a flat surface that is large enough for the computer and any other items you are using, such as a printer. Leave enough space around the computer and other equipment to provide adequate ventilation. Otherwise, they may overheat.

To keep your computer in prime operating condition, protect your work area from:

❖ Dust, moisture, and direct sunlight ❖ Equipment that generates a strong electromagnetic field,

such as stereo speakers (other than speakers that are connected to the computer) or speakerphones

❖ Rapid changes in temperature or humidity and sources of

temperature change such as air conditioner vents or heaters

❖ Extreme heat, cold, or humidity ❖ Liquids and corrosive chemicals

Keeping yourself comfortable

The Toshiba Instruction Manual for Safety and Comfort, that shipped with your computer, contains helpful information for setting up your work environment and tips for working comfortably throughout the day.

Getting Started

Selecting a place to work

Precautions

Your computer is designed to provide optimum safety and ease of use, and to withstand the rigors of travel. You should observe certain precautions to further reduce the risk of personal injury or damage to the computer.

❖ Avoid prolonged physical contact with the underside or

surface of the computer.

Getting Started

Selecting a place to work

Never allow any liquids to spill into any part of your computer, and never expose the computer to rain, water, seawater or moisture. Exposure to liquid or moisture can cause electric shock or fire, resulting in damage or serious injury. If any of these eventualities should accidentally occur, immediately:

1. Turn off the computer.

2. Disconnect the AC adapter from the power plug socket and computer.

3. Remove the battery pack.

Failure to follow these instructions could result in serious injury or permanent damage to the computer.

Do not turn on the power again, until you have taken the computer to an authorized service center.

If you experience discomfort while operating the computer, stop immediately and rest. Continuous operation for long periods without adequate rest may cause pain in the arms, wrists, hands, neck or other part of the body. If pain persists despite rest, consult your doctor.

PC base and palm rest can become hot! Avoid prolonged contact to prevent heat injury to skin.

Read the enclosed Instruction Manual for Safety and Comfort.

Getting Started

Selecting a place to work

Some PC Cards can become hot with prolonged use. Overheating of a PC Card can result in errors or instability in its operation.

Before you remove a PC Card, always wait for it to cool. You could get burned removing a hot PC Card.

Never place a heavy object on the computer and be careful not to drop a heavy object onto the computer. It could damage the computer or cause system failure.

❖ Never turn off the computer if a drive light indicates a

drive is active. Turning off the computer while it is reading from or writing to

a disk may damage the disk, the drive, or both.

❖ Keep the computer and disks away from objects that

generate strong magnetic fields, such as large stereo speakers.

Information on disks is stored magnetically. Placing a magnet too close to a disk can erase important files.

Handle discs carefully. Avoid touching the surface of the disc. Grasp it by its center hole and edge. If you handle the disc incorrectly, you could damage the disc and possibly lose data.

❖ Scan all new files for viruses.

This precaution is especially important for files you receive via email or download from the Internet. Occasionally, even new programs you buy from a supplier may contain a computer virus. You need a special program to check for viruses. Ask your dealer to help you.

Getting Started

Setting up your computer

Important information on your computer’s cooling fan

Your computer may have a CPU cooling fan that cools the CPU by drawing outside air into the computer. The cooling fan may be located on the bottom of the computer.

To prevent possible overheating of the CPU, make sure the air intake on the cooling fan is not blocked. The fan draws in air by creating a vacuum. If the fan is blocked, it could cause the CPU to run at a lower performance level or cause the computer to shut down. Loose items such as notebook and tissue paper, plastic wrappers, or other similar materials can block the air intake, preventing air from reaching the CPU. Do not use the computer on surfaces with objects that can be drawn in by the cooling fan.

NOTE

The cooling fan location will vary depending on the computer.

Setting up your computer

TECHNICAL NOTE: You must complete all setup steps up to and including “Setting up your software” on page 47 before adding external or internal components to your computer. These components include, but are not limited to, a mouse, keyboard, printer, memory, and PC Cards.

Your computer contains a rechargeable main battery that needs to be charged before you can use it.

To use external power or to charge the battery you must attach the AC adapter. See “Connecting to a power source”

on page 49.

To register your computer online or to sign up for an Internet account, you must either connect the built-in modem to a

telephone line or establish a Local Area Network (LAN) connection. See “Connecting the modem” on page 65.

Setting up your software

Getting Started

Setting up your computer

NOTE

The first time you turn on your computer, the Setup Wizard guides you through steps to set up your software.

1 From the welcome screen click Next to enter the Setup

2 Confirm acceptance of Microsoft’s End User License

3 Select the appropriate option from the Help protect your

4 Enter the computer name and description and click Next

5 Select how your computer will connect to the Internet

The names of windows displayed, and the order in which windows appear, may vary according to your software setup choices.

Wizard.

Agreement and click Next.

computer screen and click Next.

or Skip.

and click Next. The computer will pause for a moment while checking for an

Internet connection.

If an Internet connection could not be found, a window will display the message: “An Internet connection could not be chosen.” Click Next to continue.

NOTE

If you are connecting your computer to a network, consult your system administrator before you choose your computer name and network settings.

Getting Started

Registering your computer with Toshiba

6 Follow the remaining screen prompts to complete the

setup process. Once you click the final screen, your computer restarts

automatically.

Registering your computer with Toshiba

Product registration is strongly recommended, and allows Toshiba to send the Customer periodic updates, announcements, and special offers applicable to the product. Product registration can be completed during the initial start up process of your computer. If you opt not to register at that time, you can either double-click the icon on your desktop or go to the Toshiba web site at www.register.toshiba.com. Customer failure to complete Product Registration will not diminish Customer rights under this limited Warranty.

NOTE

To register online, you must be connected to the Internet via your computer’s modem and a voice-grade telephone line, or by a Local Area Network.

Adding external devices

NOTE

After starting your computer for the first time you may want to:

❖ Add more memory (see “Installing a memory module”

❖ Connect a mouse (see “Connecting an external USB

Before adding external devices or memory, Toshiba recommends setting up your software. See “Setting up your

software” on page 47.

on page 56)

mouse” on page 62)

Connecting to a power source

❖ Connect a full-size keyboard (see “Connecting an

external USB keyboard” on page 63)

❖ Connect an external monitor (see “Using external display

devices” on page 128)

❖ Connect a local printer (see “Connecting a printer” on

page 63)

❖ Install PC Cards (see “Using PC Cards” on page 135)

Connecting to a power source

Your computer requires power to operate. Use the power cord/cable and AC adapter to connect the computer to a live electrical outlet, or to charge the computer’s main battery.

Never pull on a power cord/cable to remove a plug from a socket. Always grasp the plug directly. Failure to follow this instruction may damage the cord/cable, and/or result in a fire or electric shock, possibly resulting in serious injury.

Getting Started

When you connect the AC adapter to the computer, always follow the steps in the exact order as described in the User’s Guide. Connecting the power cord/cable to a live electrical outlet should be the last step; otherwise, the adapter DC output plug could hold an electrical charge and cause an electrical shock or minor bodily injury when touched. As a general safety precaution, avoid touching any metal parts.

Always use the Toshiba AC adapter that was provided with your computer, or use Toshiba recommended alternate models to avoid any risk of fire or other damage to the computer. Use of an incompatible AC adapter could cause fire or damage to the computer, possibly resulting in serious injury.

Power cord/cable

Getting Started

Connecting to a power source

AC adapter cord

AC adapter

Sample power cord/cable and AC adapter

To connect AC power to the computer:

1 Connect the power cord/cable to the AC adapter.

Sample connecting the power cord/cable to the AC adapter

Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling.

Getting Started

Connecting to a power source

2 Plug the AC adapter cord into the DC-IN on the back of

the computer.

Sample connecting the AC adapter to the computer

3 Connect the power cord/cable to a live electrical outlet.

The AC power light on the system indicator glows green.

Never tamper with the cord/cable or plug; never splice or alter a cord/cable; never bend or twist a cord/cable; never place heavy objects on a cord/cable; never place a cord/cable near a heat source; never run a cord/cable through a pinch point such as a door or window; never use nails, staples or similar objects to fasten or attach cord in place; never attempt to disassemble or repair an AC adapter or a Battery Charger. Doing any of the above may damage the cables, and/or result in a fire or electric shock, possibly resulting in serious injury.

Never attempt to connect or disconnect a power plug with wet hands. Failure to follow this instruction could result in an electric shock, possibly resulting in serious injury.

The computer’s main battery light gives you an indication of the main battery’s current charge:

❖ Glows amber while the battery is being charged (AC

adapter connected)

Getting Started

Charging the main battery

❖ Glows green when the main battery is fully charged ❖ Is unlit when the battery is discharged, the battery is not

charging, or the AC adapter is not plugged into the computer or AC outlet

❖ Flashing amber means the main battery charge is low and

it is time to recharge the main battery or plug in the AC adapter

NOTE

If the AC power light flashes amber during charging, either the battery pack is malfunctioning, or it is not receiving correct input from the AC power supply.

Disconnect the AC cable and remove the battery pack. See

“Changing the main battery” on page 115 for information on

replacing the main battery.

Charging the main battery

Your computer came with its main battery already installed. Before using the battery to power the computer, you must charge the battery.

To charge the main battery, leave the computer plugged into an AC power source for at least three hours with the computer turned off. After that, the battery will be completely charged and ready to power the computer.

TECHNICAL NOTE: The RTC battery does not charge while the computer is turned off, even when AC power is attached.

The RTC battery charges when the computer is powered on.

For more information about installing or removing the main battery, see “Changing the main battery” on page 115.

Getting Started

Using the computer for the first time

The computer is now ready for you to turn it on and begin using it.

Opening the display panel

1 Press the display release button.

Opening the display panel

2 Lift the display panel. 3 Adjust the display to a comfortable viewing angle.

To avoid damaging the display panel, do not force it beyond the point where it moves easily.

Never lift the computer by the display panel.

Small bright dots may appear on your screen display when you turn on your PC. Your display contains an extremely large number of thin-film transistors (TFT) and is manufactured using high-precision technology. Any small bright dots that may appear on your display are an intrinsic characteristic of the TFT manufacturing technology. Over a period of time, and depending on the usage of the computer, the brightness of the screen will deteriorate. This is also an intrinsic characteristic of the screen technology. When the

Getting Started

Using the computer for the first time

computer is operated on battery power, the screen will dim and you may not be able to increase the brightness of the screen while on battery power.

To learn how to rotate the display panel or use your computer in tablet mode, see “Using your computer in tablet mode” on

page 72.

NOTE

While in Primary Landscape mode, you can use FN + Spacebar to change the screen resolution on the fly; from 1450 x 1050 to 1024 x 768 to 800 x 600 (repeated use will recycle the resolutions). For more information, see “Display

modes” on page 240.

Your computer’s features and specifications

Certain notebook chassis are designed to accommodate all possible configurations for an entire product Series. Your selected model may not have all the features and specifications corresponding to all of the icons or switches shown on the notebook chassis, unless you have selected all those features.

This information applies to all the features and icons described in this guide.

Below are examples of some of the many possible icons used on your computer:

Sample system icons

Turning on the power

1 Make sure any external devices (such as the AC adapter,

if you plan to use AC power rather than battery power) are properly connected and ready.

2 Check to ensure that all drives are empty. 3 Slide the power lock button down, and then slide the

power button to the right and hold it until the on/off light on the system indicator panel glows green—about one second.

The preinstalled operating system will load automatically.

When you turn on the computer for the first time, do not turn off the power again until the operating system has loaded completely.

Adding memory

HINT: To purchase additional memory modules, see the accessories information packaged with your system or visit

accessories.toshiba.com.

Getting Started

Adding memory

Your computer comes with enough memory to run most of today’s popular applications. You may want to increase the computer’s memory if you use complex software or process large amounts of data.

For more information on memory options, check the accessories information that came with your computer, or visit accessories.toshiba.com.

NOTE

Before adding external devices or memory, Toshiba recommends setting up your software. See “Setting up your

software” on page 47.

Getting Started

Adding memory

Installing a memory module

Your computer is equipped with two memory slots which can provide for various memory configurations.

Additional memory modules can be installed in the memory expansion slots on the base of the computer. You will need a standard Phillips No.1 screwdriver for this procedure.

If you use the computer for a long time, the memory module will become hot. If this happens, let the module cool to room temperature before you replace it.

To avoid damaging the computer’s screws, use a standard Phillips No. 1 screwdriver that is in good condition.

Installing a memory module with the computer’s power on may damage the computer, the module, or both.

Before you install or remove a memory module, turn off the computer using the Start menu. If you install or remove a memory module while the computer is in Standby or Hibernation mode, data will be lost.

If the computer is on, begin at step 1; otherwise, skip to step

1 If the computer is on, click Start, Turn Off Computer.

The Turn off computer window appears.

2 Click Turn O f f .

The operating system turns off the computer.

Getting Started

Adding memory

3 Unplug and remove any cables connected to the

computer, including the AC adapter.

4 Remove the battery. For information on removing the

battery, see “Removing the battery from the computer”

on page 115.

5 Close the display panel and turn the computer upside

down to locate the memory module slot cover.

Memory module slot cover

Sample locating the memory module slot cover

6 Using a standard Phillips No. 1 screwdriver, unscrew the

screw that secures the memory slot cover.

Removing the memory slot cover screws

7 Remove the memory slot cover.

Getting Started

Adding memory

8 Place the screw and the cover in a safe place so that you

can retrieve them later.

Static electricity can damage the memory module. Before you handle the module, touch a grounded metal surface to discharge any static electricity you may have built up.

To avoid damaging the memory module, be careful not to touch its pin connector on the side you insert into the computer.

9 Remove the new memory module from its antistatic

packaging.

Avoid touching the connectors on the memory module or on the computer. Grease or dust on the connectors may cause memory access problems.

10 Insert the memory module into the socket on the

underside of the computer.

Sample inserting the memory module into the slot

Getting Started

Adding memory

11 Hold the memory module by its edges so that the gold

connector bar faces the slot, at a slight angle to the socket.

clip

Sample inserting the memory module into the socket

12 Check that the module is inserted completely into the

socket and lined up squarely with the socket clips.

Sample aligning the module into the socket

13 Gently press down on the memory module connector

until the clips snap into place.

clip

Sample pressing down on the memory module connector until the clips snap into place

Getting Started

Adding memory

Do not force the memory module into position. The memory module should be completely inserted into the socket and level when secured in place.

The clips on either side of the memory module snap into place when the memory module is properly inserted.

14 Replace the memory module slot cover and tighten the

screw.

15 Re-insert the battery. For more information on inserting

the battery, see “Changing the main battery” on page 115.

16 Turn the computer right side up. 17 Reconnect the cables. 18 Restart the computer.

TECHNICAL NOTE: You must have at least one memory module installed for the computer to work.

You can now continue setting up the computer. When the operating system has loaded, you can verify that the computer has recognized the additional memory module.

If you are adding an extra memory module after setting up the computer, verify that the computer has recognized it correctly as described in “Checking total memory” on page 62.

Removing a memory module

If you need to remove a memory module:

1 Complete steps 1–8 in “Installing a memory module” on

page 56 to shut down the computer and expose the

memory module(s).

Getting Started

Adding memory

Do not try to remove a memory module with the computer turned on. You can damage the computer and the device.

Do not remove the memory module while the computer is in Standby or Hibernation mode. The computer could hang up the next time you turn it on and data in memory will be lost. In either of the above cases, the Standby configuration will not be saved.

The following message appears when you turn on the power:

Warning: Resume Failure Press Any Key To Continue

If the computer hangs up when you turn it on, perform the following: Press the power button and hold it down for at least ten seconds, then turn the power on again.

2 Pull the clips away from the memory module.

The memory module pops up slightly.

3 Gently lift the memory module to a 45 degree angle and

slide it out of the slot.

Removing the memory module

4 Replace the memory module slot cover and tighten the

screw.

Getting Started

Connecting an external USB mouse

5 Turn the computer over and restart it.

TECHNICAL NOTE: You must have at least one memory module installed for the computer to work.

Checking total memory

When you add or remove a memory module, you can check that the computer has recognized the change. To do this:

1 Click Start, Control Panel, Performance and

Maintenance, and then System.

2 The General tab view automatically appears and shows

total memory.

If the computer does not recognize the memory configuration, turn off the computer, remove the memory slot cover, and make sure the memory module is seated properly, as described in step 13 of “Installing a memory module” on

page 56.

Connecting an external USB mouse

You may want to use a mouse instead of the TouchPad, the computer’s built-in pointing device. You can attach an external mouse to one of the computer’s USB ports, provided the mouse is USB-compatible.

To connect the mouse, or any other USB device to your computer, plug its cable into one of the USB ports. You can connect it while the computer is on.

Getting Started

Connecting an external USB keyboard

Connecting a USB mouse

The operating system automatically detects the mouse. The mouse and TouchPad can be used at the same time.

Connecting an external USB keyboard

You can attach an external standard keyboard to a USB port on your computer, provided the keyboard is USB-compatible.

Connecting a printer

NOTE

You can connect a USB-compatible printer to your computer through the USB ports. To determine if the printer is USBcompatible, check its documentation.

Your printer documentation may require you to install the printer software before physically connecting the printer to your computer. If you do not install the software as instructed by the printer manufacturer, the printer may not function correctly.

Read the documentation that came with your printer. Follow the manufacturer’s instructions when connecting a local printer.

Getting Started

Connecting a printer

To make the connection, you need a suitable USB cable, which may come with your printer. If a USB cable was not included with your printer, you can purchase one from a computer or electronics store.

If your printer supports Plug and Play, your computer will automatically recognize the printer; the printer is then ready for use. Refer to your printer documentation for further instructions.

TECHNICAL NOTE: To determine if your printer supports Plug and Play, check its documentation.

If your printer does not support Plug and Play, you must set up the printer as described in “Setting up a printer” on

page 64.

To connect a USB printer to your computer:

1 Connect the printer cable to the printer and then connect

the other end to one of the computer’s USB ports.

2 Plug the printer’s power cable into a live electrical outlet.

Setting up a printer

NOTE

If your printer does not support Plug and Play, follow these steps to set it up for the first time. You only need to set up the printer once.

1 Click Start, Printers and Faxes.

Some printers require a specific installation process. Refer to your printer installation guide for instructions before completing the following procedure.

The Printers and Faxes window appears.

2 Click Add a printer.

The Add Printer Wizard appears.

Sample Add Printer Wizard

Getting Started

Connecting the modem

3 Follow the on-screen instructions to set up your printer.

Connecting the modem

Your computer comes with a built-in modem that can be connected to a standard voice-grade telephone line.

The modem allows you to:

❖ Access the Internet. ❖ Communicate with your office’s local area network

(LAN), or a larger corporate wide area network (WAN). For specific information about connecting to a LAN or

WAN, consult your network administrator.

❖ Send a fax directly from your computer.

For more information regarding your system's V.92 modem, visit the Toshiba Web site at

www.pcsupport.toshiba.com.

Getting Started

Connecting the modem

Connecting to a phone line

Before you can communicate using the modem, you need to connect it to a telephone line. Your computer’s built-in modem provides an RJ11 jack.

1 Plug one end of a telephone cable (purchased separately)

into the modem port on the left-side of the computer.

Connecting the telephone cable to the modem port

2 Connect the other end to the RJ11 wall jack.

Connecting to a wall jack

The modem is designed for use with a standard analog telephone line. Never connect the modem to a digital telephone line. A digital line will damage the modem.

Now you are ready to send a fax or use the modem to connect to an online service or the Internet.

For more information on using a modem, see “Setting up for

communications” on page 148.

Connecting to a network

To learn how to use your computer’s LAN or Wi-Fi® capabilities to connect to a network, see “Accessing a LAN”

on page 151 and “Using wireless LAN connectivity” on page 151.

Using the TouchPad™

The TouchPad, the small, smooth square cutout located in front of the keyboard, is sensitive to touch and enables you to move the cursor with the stroke of a finger. Simply move your finger on the TouchPad in the direction you would like to move the cursor:

❖ To move the cursor to the top of the page, push your

finger forward on the TouchPad.

❖ To move the cursor to the bottom of the page, drag your

finger toward yourself.

Getting Started

Connecting to a network

❖ To move the cursor to the right side of the page, slide

your finger across the TouchPad from left to right.

❖ To move it to the left side, slide your finger from right to

left.

NOTE

Once you have positioned your cursor, you can double-tap the TouchPad or click the buttons to open a program or file, or to get information about an icon.

Because the TouchPad is much smaller than the display screen, moving your cursor across the screen often means having to move your finger several times across the TouchPad in the preferred direction.

Primary and secondary control buttons

When you want to click or choose an item, use the TouchPad to move the pointer/cursor to the item. Once the pointer/

Getting Started

Using the TouchPad™

cursor is positioned, you can double-tap the TouchPad or click the buttons to open a program or file, or to get information about an icon.

The control buttons are adjacent to the TouchPad and are used like the buttons on a mouse. The primary control button is the left one and corresponds to the left mouse button. To doubletap, press the primary button twice in rapid succession.

The function of the secondary button depends on the program you are using. It usually corresponds to the right mouse button. Check your program’s documentation to find whether it uses the secondary mouse button.

Disabling or enabling the TouchPad

The TouchPad is enabled by default. To change the current enable/disable TouchPad setting:

1 Click Start, Control Panel.

The Control Panel window appears.

2 Click Printers and Other Hardware. 3 Click Mouse Properties.

The Mouse Properties window appears.

4 Click the TouchPAD ON/OFF tab.

The TouchPAD ON/OFF tab view window appears.

Using the TouchPad™

Sample Mouse Properties window

Getting Started

5 Select Disable or Enable, whichever is appropriate. 6 Click Apply. 7 Click OK.

The Mouse Properties window closes.

8 Close the Printers and Other Hardware window. 9 Close the Control Panel window.

You can also use a hot key to disable or enable the TouchPad. See, “Disabling or enabling the TouchPad” on page 241.

Getting Started

Using the Cross-Functional button

The Cross-Functional button is located on the front of the display (the left-most button at bottom right). You can use it to move the cursor as well as make selections by pressing it.

NOTE

modes” on page 240.

Turning off the computer

It is a good idea to power off your computer when you are not using it for a while.

If you are using the computer for the first time, leave the computer plugged into a power source (even though the computer is off) to fully charge the main battery. When the battery light glows green, the battery is fully charged.

Guidelines for powering off the computer:

❖ If you have work in progress and if you are not connected

to a network, use the Hibernate command to save your

system settings to the hard disk so that, when you turn on

the computer again, you automatically return to where

you left off.

❖ To leave the computer off for a longer period, power

down the computer. The Windows

operating system uses the Shut down command to power

down the computer if you are connected to a Windows

network server (domain server) or the Turn Off command

if you are not.

XP Tablet PC Edition

❖ When the hard disk drive light on the system indicator

panel is on, do not turn off the power. Doing so may

damage your hard disk.

Getting Started

Turning off the computer

For more information, see “Powering down the computer” on

page 90.

Closing the display panel

When you are finished using the computer, power off and close the display panel to keep dust and dirt out of the computer.

If you close the display panel while the computer is still on, one of these actions will occur:

❖ If you have the audible warning set, the computer will

beep to notify you that it is still on. See “Toshiba

Hardware Setup” on page 169.

❖ If you have an action feature set, the computer will

perform that action (Nothing, Standby, Hibernate). For more information, see “Power Management” on

page 167.

Different ways to turn the computer on and off

Pressing the power button is not the only way to turn on and off the computer.

Alternatives include:

❖ Using Hot Key combinations ❖ Opening and closing the display panel ❖ Pressing the Windows Security button on the front of the

display (the button on the far right)

For more information, see “Using Hibernation” on page 95 and “Using Standby” on page 98.

Getting Started

Using your computer in tablet mode

One of your computer’s features is a convertible display that allows you to use the screen much as you would a writing tablet.

Rotating the screen

By simply rotating and folding the screen over the keyboard, your system is ready to use in tablet mode, with the included Toshiba tablet pen.

When rotating LCD screen of your computer, be sure to slowly turn the screen in the proper direction, and not apply excessive force or speed.

Getting Started

Using your computer in tablet mode

Using the computer in tablet mode

To remove the tablet pen, press in, and then pull it out from the right side of the computer.

For more information on using the computer in tablet mode, see “Using tablet mode” on page 130.

NOTE

Your computer came with applications already installed specifically designed to work with the tablet feature of the system. For more information on those applications, see the documentation provided with them.

Included with your computer is Sensiva’s Symbol Commander™ allowing you to quickly execute commands (for example, changing the layout of the screen from landscape to portrait) by drawing a pre-assigned symbol on the screen, and the Cross Menu application which allows you to make Hot Key assignments, access other Toshiba utilities, and create your own custom menus. For details on using Symbol Commander, refer to the online help with the application. For details on using the Cross Menu, refer to “Cross Menu Utility” on

page 174.

Getting Started

Caring for your computer

Customizing your computer’s settings

There are several ways in which you can customize your computer to suit your particular requirements. Refer to your operating system documentation or Help and Support for details.

You may also wish to customize your power usage settings. For more information, see “Power Profiles” on page 113. There are additional custom settings you can choose. See

“Toshiba Utilities” on page 159.

Caring for your computer

This section gives tips on cleaning and moving your computer. For information about taking care of your computer’s main battery, see “Safety precautions” on

page 119.

Cleaning the computer

Keep liquid, including cleaning fluid, out of the computer’s keyboard, speaker grille and other openings. Never spray cleaner directly onto the computer. Never use harsh or caustic chemical products to clean the computer.

To keep your computer clean, gently wipe the display panel and exterior case with a lightly dampened cloth.

Moving the computer

Before moving your computer, even across the room, make sure all disk activity has ended (the drive-in-use light stops glowing) and all external peripheral cables are disconnected.

Do not pick up the computer by its display panel or by the back (where the ports are located). Doing so could damage the system.

Using a computer lock

You may want to secure your computer to a heavy object such as your desk. The easiest way to do this is to purchase an optional computer lock cable. For more information on purchasing a cable lock. visit accessories.toshiba.com.

Getting Started

Caring for your computer

Sample computer lock cable

To secure the computer:

1 Wrap the cable through or around some part of a heavy

object. Make sure there is no way for a potential thief to slip the

cable off the object.

2 Pass the locking end through the loop. 3 Insert the cable’s locking end into the security lock slot

on either side of your computer, then engage the locking device.

Getting Started

Caring for your computer

The computer is now securely locked.

Sample locking the computer

Chapter 2

Learning the Basics

This chapter lists computing tips and provides important information about the system’s basic features.

Computing tips

❖ Save your work frequently.

Your work temporarily stays in the computer’s memory until you save it to the disk. You will lose all unsaved work, if, for example, a system error occurs and you must restart your computer, or your battery runs out of charge while you are working. Your computer can be configured to warn you when the battery is running low. See “Setting

battery alarms” on page 111.

HINT: Some programs have an automatic save feature which you can turn on. This feature saves your file to the hard disk at preset intervals. See your software documentation for details.

Learning the Basics

Using the keyboard

❖ Back up your files to diskettes (or other removable

storage media) on a regular basis. Label the backup

copies clearly and store them in a safe place.

If your hard disk suddenly fails, you may lose all the data

on it unless you have a separate backup copy.

❖ Use Error-Checking and Disk Defragmenter regularly to

conserve disk space and help your computer perform at

its optimal level. Consult your Windows

system documentation for more information on these and

other utilities.

❖ Always use the proper procedure to power off the

computer. See “Powering down the computer” on

page 90.

TECHNICAL NOTE: The operating system records information, such as your desktop setup, during its shutdown procedure. If you do not let the operating system shut down, details such as new icon positions may be lost.

XP operating

Using the keyboard

Your computer’s keyboard contains character keys, control keys, function keys, and special Windows all the functionality of a full-size keyboard.

Keyboard

keys, providing

Learning the Basics

Using the keyboard

Character keys

Typing with the character keys is very much like typing on a typewriter, except that:

❖ The spacebar creates a space character instead of just

passing over an area of the page.

❖ The lowercase letter l (el) and the numeral 1 are not

interchangeable.

❖ The uppercase letter O and the numeral 0 are not

interchangeable.

❖ The Caps Lock key changes only the alphabet keys to upper

case—the number and symbol keys are not affected. The light on the

Lock

key.

Caps Lock key glows when you press the Caps

Making your keyboard emulate a full-size keyboard

Although your computer’s keyboard layout is compatible with a standard full-size keyboard, it has fewer keys.

A standard full-size keyboard has two editing keys, cursor positioning keys, and a numeric keypad. Pressing the of the specially marked keys on your computer’s built-in keyboard allows you to emulate a full-size keyboard.

NOTE

Your computer’s keyboard has only one Most of the time this does not matter. However, some programs assign separate functions to the right and left

Alt keys, or to the regular and numeric pad Enter keys on

and the full-sized keyboard. Using the these separate keys, as follows:

Fn key simultaneously in combination with one

The emulation Fn key and the Wake up on Keyboard while in Standby are only functional when using the internal keyboard; they are not supported when using a USB or PS/2 keyboard.

Enter, Ctrl, and Alt keys,

Enter and one Ctrl key.

Fn key you can simulate

Ctrl

Learning the Basics

Using the keyboard

❖ Press Fn and Ctrl simultaneously to simulate the Ctrl key on

the right side of the enhanced keyboard.

❖ Press Fn and Enter simultaneously to simulate the Enter key

on the numeric pad of the enhanced keyboard.

Ctrl, Fn, and Alt keys

Ctrl

Ctrl, Fn, and Alt keys

Ctrl, Fn, and Alt keys do different things depending on the

The program you are using. For more information, see your program documentation.

Function keys

The function keys (not to be confused with the Fn key) are the 12 keys at the top of the keyboard.

Function keys

F1 through F12 are called function keys because they execute

programmed functions when pressed. Used in combination with the specific functions on the computer. For more information, see

“Fn-esse” on page 160, or “Hot Keys” on page 235.

Hot keys

Fn key, function keys marked with icons execute

Alt

When used in combination with the Fn key, function keys marked with icons run programmed functions specific to your computer. For more information, see “Hot Keys” on

page 235.

Windows® special keys

Your computer’s keyboard has two keys, located at the topright of the keyboard, that have special functions in the operating system:

❖ Start key—Opens the Start menu ❖ Application key—Has the same function as the

secondary mouse (or TouchPad) button

Overlay keys

The keys with numbers and symbols on the front of them form the numeric and cursor overlay. This overlay lets you enter numeric data or control the cursor as you would using the 10-key keypad on a desktop computer’s keyboard.

Start key Application key

Learning the Basics

Using the keyboard

()&

∗

790

Home PgUp

78 9

UIOP

456

JKL

End PgDn

123

Ins Del

∗

: ;

Numeric and cursor control overlay

Learning the Basics

Using the keyboard

Using the overlay to type numeric data

The keys with the numbers on their right front are the numeric overlay keys.

To turn the numeric overlay on, press simultaneously. The numeric mode light glows when the numeric overlay is on.

Once the numeric overlay is turned on:

To Procedure

Type lowercase letters Press and hold down

you type the letters

Type uppercase letters Press

while you type the letters

Use the cursor control keys

To turn off the numeric overlay, hold down the

F11 again. The numeric mode light on the keyboard

press indicator panel goes out.

Press and hold down you use the overlay keys, then release numeric overlay

Fn and F11

Fn while

Fn and Shift simultaneously

Shift while

Shift to return to the

Fn key and

Using the cursor control overlay

To turn on the cursor control overlay, press Fn and F10 simultaneously. The cursor control mode light on the keyboard indicator panel glows when the cursor control overlay is on.

Once the cursor control overlay is on:

To Procedure

Type lowerc ase letters

Press and hold down type the letters

Fn while you

Learning the Basics

To Procedure

Starting a program

Type uppercase letters

Use the numeric keys

To turn off the cursor control overlay, hold down the Fn key and press keyboard indicator panel goes out.

F10 again. The cursor control mode light on the

Starting a program

The easiest way to start a program is to double-click the name of the file that contains the information you want to work on. To find the file, use My Computer or Windows

If you prefer to open the program first, you have the following options:

❖ Double-click the icon for the program on your desktop ❖ Use the Start menu ❖ Use Windows

Press

Fn and Shift simultaneously

while you type the letters

Press and hold down use the overlay keys, then release

Shift to return to the cursor control

overlay

Explorer to locate the program file

Shift while you

Explorer.

❖ Use the Run dialog box

For more information, see Help and Support in the Start menu.

Learning the Basics

Saving your work

Before you turn off the computer, save your work to the hard disk drive or a diskette.

Always save your data even when you are using Standby mode. If your main battery fully discharges, your information will be lost. Your computer can be configured to warn you when the battery is running low, see “Setting battery alarms”

on page 111.

Many programs offer a feature that saves documents at regular intervals. Check your program’s documentation to see if it has an automatic save feature.

Saving files

1 On the File menu of your Windows program, click Save.

If you are working with a document that already has a file

name, this is all you need to do. If you created a new

document, your program displays a Save As dialog box.

Use this dialog box to specify where to store the document

and to give it a file name.

Sample Save As dialog box

Learning the Basics

Saving your work

2 Choose the drive and folder where you want your file to

be stored.

3 Type a file name, then click Save.

HINT: To make another copy of the file you are currently working with, choose Save As from the File menu and give the new file a different name.

File names

The Windows XP operating system supports long file names which can contain up to 255 characters and can include spaces. Some applications do not support long file names and require file names limited to no more than eight characters.

You may use all the letters and numbers on the keyboard plus these characters: _ ^ $ ~ ! # % & { } ( ) @ and ’. File names are not case-sensitive.

Using a file extension

Most programs assign an extension to the file name that identifies the file as being created in the program with a particular format. For example, Microsoft Word saves files with a .doc extension. Any file name with an extension of “.doc” is assumed to be a Microsoft Word file. Creating your own extension is usually unwise, since the program is unlikely to recognize a strange extension and may refuse to handle your file correctly.

TECHNICAL NOTE: By default, the Windows® XP operating system does not show file extensions. For information on showing or hiding file extensions, see your Windows online help.

Learning the Basics

Printing your work

Verify that the Windows® XP Tablet PC Edition operating system is set up for your printer as described in “Setting up a

printer” on page 64.

TECHNICAL NOTE: You only need to set up the printer the first time you connect it. If you use more than one printer or are changing printers, you will need to set up the operating system to run with the additional printer(s).

To print a file:

1 If your printer is not on, turn it on now. 2 Open the File menu of your Windows program and click

Print.

The program displays a Print dialog box.

Sample Print dialog box

3 Specify the print parameters. For example, the range of

pages and number of copies to print.

4 Click Print.

Backing up your work

Backing up your files means copying individual files to media, such as a writable CD. Or, you can copy entire sections of your hard disk to another device such as a tape drive or to your network partition.

To back up to a writable CD, optional diskette drive, or other media:

1 Attach an optional external drive to one of the USB ports.

2 Insert the media into the appropriate drive. 3 Click Start, then click My Computer. 4 Double-click the drive that contains the file you want to

copy.

5 Double-click the folder that contains the file, then click

the file you want to copy.

Learning the Basics

Backing up your work

TECHNICAL NOTE: You can use the Ctrl or Shift keys to select more than one file. To select multiple consecutive files, hold down the files within that range will be highlighted). To select nonconsecutive files, hold down the individual files you want to select.

6 Right-click, select File, then click Send To. 7 Click the icon for the destination device.

For information on special Windows XP capabilities related to backing up and restoring data, see “Data and system

configuration backup in Windows XP” on page 225.

Restoring your work

To restore information from your backup media to your hard disk, use the Restore page in the backup program. Look in the

Shift key and click the first and then the last file (all

Ctrl key and click the

Learning the Basics

Playing audio

online Help or your operating system documentation for information on restoring files.

Playing audio

Insert an audio CD into the optional external DVD-ROM/ multi-function drive and close the disc tray.

The computer automatically detects a disc in the drive and opens the Audio CD window. To play an audio CD, select

Play Audio CD using Windows Media Player and click OK.

Sample Audio CD window

Your computer is equipped to play audio files, including those that run on optional media devices such as CD and DVD drives. By adjusting the controls on your operating system’s Windows Media playing of those files.

The Windows Media

Player, you can control the

Player window appears.

Learning the Basics

Playing audio

Sample Windows Media Player screen

The Windows an ordinary compact disc player:

Media Player control panel works much like

❖ To play the CD or to pause, click the Play/Pause button

on the CD Player control panel.

❖ To stop the CD, click the Stop button.

Before putting on headphones to listen to an audio CD, turn the volume dial down, and do not set the volume too high when using the headphones. Continuous exposure to loud sound can harm your hearing.

Learning the Basics

Powering down the computer

When you power down the computer, you have a number of options to choose from:

❖ Turn Off or Shut down, which power off the computer ❖ Hibernation, which saves the current operating state to

the hard disk and powers off the computer

❖ Standby, which saves the current operating state to

memory and enters a low power mode

❖ Restart, which restarts the computer

Each option has its advantages.

TECHNICAL NOTE: Before using any of these options to power down your computer, save your files and make sure the disk activity lights are off.

If you change your mind and decide to continue working after all, wait a few seconds before turning the computer on again.

Turn Off or Shut down command

The Turn Off or Shut down commands power off the computer. The Windows system uses Turn Off if you are not connected to a Windows network server (domain server). It uses Shut down if you are connected to a Windows

Factors to consider when choosing Turn Off or Shut down:

❖ No power is used while the computer is turned off. This

is the most efficient mode if you will be away from your

computer for an extended time.

❖ Restarting from Turn Off or Shut down uses the most

time and battery power.

XP Tablet PC Edition operating

network server (domain server).

❖ When starting up again, the system does not

automatically open the programs and files you were previously using.

Restart command

Restart is the same as Turn Off or Shut down but automatically powers up the computer. Use it when you need to reload the operating system, for example to activate changes to system settings.

Hibernation command

The Hibernation command powers off the computer, but it first saves the current state of the computer to the hard disk. Since Hibernation does not require power to maintain the saved information, the system settings are retained indefinitely. Restoring information from the hard disk takes longer than restoring it from memory. When you start up again, the computer runs a self-test, loads the operating system, and then returns to the state in which you left it.

Learning the Basics

Powering down the computer

Factors to consider when choosing Hibernation:

❖ While in Hibernation mode, the computer uses no battery

power.

❖ Because the state of the system is held on the hard disk,

no data is lost if the battery discharges while the computer is in Hibernation mode.

❖ When starting up again, this choice uses less time and

battery power than the Turn Off or Shut down option. But it uses a little more time and battery power to start up than the Standby option, because information is being retrieved from the hard disk instead of from memory.

❖ On restarting, the computer returns to the state in which

you left it, and opens all the programs and files you were using.

Learning the Basics

Using Turn Off or Shut down

Standby command

The Standby command puts the computer into a powersaving mode. Standby stores the current state of the computer in memory so that, when you restart the computer, you can continue working from where you left off.

Factors to consider when choosing Standby:

❖ While in Standby mode, the computer uses some battery

power. If your computer is left in Standby mode for an

extended period, your computer could lose data.

❖ When starting up again, this choice uses less time and

battery power than either Turn Off, Shut down or

Hibernation.

❖ On restarting, the computer returns to the state in which

you left it, and opens all the programs and files you were

using.

If you power down using the Standby command and the battery discharges fully, your unsaved information will be lost. Be sure to save your work often.

Using Turn Off or Shut down

If you are not connected to a Windows® network server (domain server), power off the computer as follows:

To turn off the computer.

1 Click Start, Turn off computer.

The Turn off computer window appears.

Learning the Basics

Using Turn Off or Shut down

Sample Turn off computer window

2 Click Turn O f f .

The computer turns itself off. If you are connected to a Windows

server), power off the computer as follows:

1 Click Start, Shut down.

The Shut Down window appears.

2 Select Shut down from the drop-down list.

network server (domain

3 Click OK.

The computer shuts down completely.

Turning off more quickly

In addition to the method described above, you can turn off the computer by pressing the power button.

To use this method, you first need to turn on the feature in TOSHIBA Power Saver.

1 Click Start, Control Panel.

The Control Panel window appears.

2 Click Performance and Maintenance. 3 Double-click the Tos h ib a Po we r Save r icon.

The TOSHIBA Power Saver Properties window appears.

Learning the Basics

Using Turn Off or Shut down

Sample TOSHIBA Power Saver Properties window

4 Click the Setup Action tab.

Sample Setup Action window

5 Select Shut down for the option you want.

❖ When I press the power button

Learning the Basics

Using Hibernation

Set this option to Shut down if you want the computer to turn off when you slide the power button.

6 Click Apply. 7 Click OK to close the TOSHIBA Power Saver Properties

window, then close the Control Panel.

Starting again after Turn Off or Shut down

To start the computer up again, slide and release the power button; the on/off light changes to green.

Using Hibernation

Enabling the Hibernation command

Hibernation is a default setting. If it should become disabled, you can enable it as follows:

1 Right-click the mouse on the Toshiba Power Saver icon

located in the System Task Tray.

2 Click Hibernate. 3 Click Enable.

Going into Hibernation mode

If you are not connected to a Windows® network server (domain server), power off the computer using the Hibernation command as follows:

1 Click Start, Turn off computer.

The Turn off computer window appears.

Learning the Basics

Using Hibernation

Sample Turn off computer window with Shift key held down to show Hibernate option

2 Hold down the shift key and click Hibernate

(“Hibernate” only appears when the Shift key is pressed). The computer saves the state of the system, including all open

programs and files, to the hard disk, and then powers down completely.

If you are connected to a Windows server), follow these steps to power down the computer using Hibernation:

network server (domain

1 Click Start, then Shut Down.

The Shut Down window appears.

2 Select Hibernate from the drop-down list of options. 3 Click OK.

The computer saves the state of the system, including all open programs and files, to the hard disk, and then powers down completely.

Going into Hibernation mode more quickly

You can also put the computer into Hibernation mode in three ways:

❖ By pressing the hotkey combination Fn+F4 ❖ By pressing the power button ❖ By closing the display panel

Learning the Basics

Using Hibernation

To set up your Hibernation options:

1 Click Start, Control Panel.

The Control Panel window appears.

2 Click Performance and Maintenance. 3 Double-click the Tosh iba P o we r Saver icon.

The TOSHIBA Power Saver Properties window appears.

Sample TOSHIBA Power Saver Properties window

4 Click to select a profile. 5 Click the Setup Action tab. 6 Select Hibernation for the options you want.

❖ When I press the power button

Set this option to Hibernation so that the computer will go into Hibernation mode when you press the power button.

❖ When I close the lid

Learning the Basics

Using Standby

Set this option to Hibernation so that the computer will go into Hibernation mode when you close the display panel.

7 Click Apply. 8 Click OK to close the TOSHIBA Power Saver Properties

window, then close the Control Panel.

Starting again from Hibernation

To start up the computer from Hibernation mode, slide and release the power button until the on/off icon glows green. The computer returns to the screen you were using.

If you went into Hibernation mode by closing the display panel, you can start the computer again by opening the display panel.

Using Standby

If you are not connected to a Windows® network server (domain server), power down the computer using the Standby command as follows:

1 Click Start, Turn off computer.

The Turn off computer window appears.

Sample Turn off computer window with Stand By option

2 Click Stand By.

The computer saves the state of all open programs and files to memory, turns off the display, and goes into a low-power

Learning the Basics

Using Standby

mode. The on/off light ( ) blinks amber indicating the machine is in Standby mode.

If you are connected to a Windows server), power down the computer using the Standby command as follows:

1 Click Start, Shut down.

The Shut Down window appears.

2 Select Stand By from the drop-down list of options. 3 Click OK.

The computer saves the state of all open programs and files to memory, turns off the display, and goes into a low-power mode. The on/off light blinks amber to indicate the machine is in Standby mode.

If you power down using the Standby command and the battery discharges fully, your unsaved information will be lost. Be sure to save your work often.

network server (domain

Going into Standby mode more quickly

You can also put the computer into Standby mode in three ways:

❖ By pressing the hot key combination Fn+F3. ❖ By pressing the power button ❖ By closing the display panel.

To put the computer into Standby mode when you slide the power button or close the display panel, you must preset the mode:

1 Click Start, Control Panel.

The Control Panel window appears

2 Click Performance and Maintenance.

100

Learning the Basics

Using Standby

3 Double-click the Tos h iba P o we r Saver icon.

The TOSHIBA Power Saver Properties window appears.

Sample TOSHIBA Power Saver Properties window

4 Click to select a profile. 5 Click the Setup Action tab.

Sample Full Power Properties window

Toshiba M205 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

Portégé® M200/M205 Series User’s Guide

Contents

Introduction

This guide

Safety icons

Other documentation

Other icons used

Service options

Selecting a place to work

Creating a computer-friendly environment

Keeping yourself comfortable

Precautions

Setting up your computer

Important information on your computer’s cooling fan

Setting up your software

Registering your computer with Toshiba

Adding external devices

Connecting to a power source

Charging the main battery

Using the computer for the first time

Opening the display panel

Your computer’s features and specifications

Turning on the power

Adding memory

Installing a memory module

Removing a memory module

Connecting an external USB mouse

Checking total memory

Connecting an external USB keyboard

Connecting a printer

Setting up a printer

Connecting the modem

Connecting to a phone line

Connecting to a network

Using the TouchPad™

Primary and secondary control buttons

Disabling or enabling the TouchPad

Using the Cross-Functional button

Turning off the computer

Closing the display panel

Different ways to turn the computer on and off

Using your computer in tablet mode

Caring for your computer

Customizing your computer’s settings

Cleaning the computer

Moving the computer

Using a computer lock

Computing tips

Using the keyboard

Character keys

Making your keyboard emulate a full-size keyboard

Ctrl, Fn, and Alt keys

Function keys

Windows® special keys

Overlay keys

Starting a program

Saving your work

Saving files

Printing your work

Backing up your work

Restoring your work

Playing audio

Powering down the computer

Turn Off or Shut down command

Restart command

Hibernation command

Using Turn Off or Shut down

Standby command

Turning off more quickly

Using Hibernation

Starting again after Turn Off or Shut down

Enabling the Hibernation command

Going into Hibernation mode

Going into Hibernation mode more quickly

Using Standby

Starting again from Hibernation