Toshiba M105-S1021 - Satellite - Celeron M 1.46 GHz, Satellite M100 Series User Manual

Satellite M100

TOSHIBA
Satellite M100 Series
User's Manual

Copyright

© 2006 by TOSHIBA Corporation. All rights reserved. Under copyright law,
this manual cannot be reproduced in any form without the prior written
permission of TOSHIBA. No patent liability is assumed, with respect to the
use of the information contained herein.

TOSHIBA Satellite M100 Series Portable Personal Computer User's Manual

First edition January 2006
Ownership and copyright of music, video computer programs, databases,

etc. are protected by the copyright laws. These copyrighted materials may
be copied for private use at home only. If, beyond the limitation above, you
copy (including to transform data formats) or modify these materials,
transfer them or distribute them via the Internet without approval of
copyright owners, you may be subject to claims for compensation for
damage and/or criminal penalities due to infringements of copyrights or
personal rights. Please remember to observe the copyright laws when you
use this product to copy the copyrighted works or perform other actions.
Please note that you may infringe the owner's rights protected by the
copyright laws if you use the screen mode switching functions (e.g.Wide
mode, Wide Zoom mode, etc.) of this product to display enlarged images/
video at coffee shops or hotels for the purposes of profits or providing these
to the public.

Disclaimer

This manual has been validated and reviewed for accuracy. The instructions
and descriptions it contains are accurate for the Satellite M100 series
Portable Personal Computers at the time of this manual’s production.
However, succeeding computers and manuals are subject to change
without notice. TOSHIBA assumes no liability for damages incurred directly
or indirectly from errors, omissions or discrepancies between the computer
and the manual.

Trademarks

Other trademarks and registered trademarks not listed above may be used
in this manual.

IBM is a registered trademark and IBM PC, OS/2, and PS/2 are trademarks
of International Business Machines Corporation. Celeron, Intel, Intel
SpeedStep, and Pentium are trademarks or registered trademarks of Intel
Corporation or its subsidiaries in the United States and other countries.

MS-DOS, Microsoft, Windows and DirectX are registered trademarks of
Microsoft Corporation.

Centronics is a registered trademark of Centronics Data Computer
Corporation. Photo CD is a trademark of Eastman Kodak.

Bluetooth is a trademark owned by its proprietor and used by TOSHIBA
under license.

ii Satellite M100

iLINK is a trademark of Sony Corporation.
TruSurround XT, WOW HD, Circle Surround Xtract, SRS and symbol

are trademarks of SRS Labs, Inc.
TruSurround XT, WOW HD, Circle Surround Xtract, TruBass, SRS 3D,

Definition and FOCUS technologies are incorporated under license from
SRS Labs, Inc. InterVideo and WinDVD are registered trademarks of the
InterVideo Inc. WinDVD Creator is trademarks of the InterVideo Inc. Other
trademarks and registered trademarks not listed above may be used in this
manual.

Macrovision License of Notice

This product incorporates copyright protection technology that is protected
by methods and claims of certain U.S. patents and other intellectual rights
owned by Macrovision Corporation, and other rights owners. Use of this
copyright protection technology must be authorized by Macrovision
Corporation and is intended for home and other limited viewing uses only
unless authorized by Macrovision Corporation. Reverse engineering of
disassembly is prohibited.

Safety Instructions

Use the following safety guidelines to help protect yourself and your
computer.

When Using Your Computer

Do not operate your portable computer for an extended period of time with
the base resting directly on your body. With extended operation, heat can
potentially build up in the base. Allowing sustained contact with the skin
could cause discomfort or, eventually, a burn.

■ Do not attempt to service the computer yourself. Always follow

installation instructions closely.

■ Do not carry a battery in your pocket, purse, or other container where

metal objects (such as car keys) could short-circuit the battery terminals.
The resulting excessive current follow can cause extremely high
temperatures and may result in damage from burns.

■ Be sure that nothing rests on your AC adapter's power cable and that

the cable is not located where it can be tripped over or stepped on.

■ Place the AC adapter in a ventilated area, such as a desk top or on the

floor, when you use it to run the computer or to charge the battery. Do
not cover the AC adapter with papers or other items that will reduce
cooling; also, do not use the AC adapter while it is inside a carrying case.

■ Use only the AC adapter and batteries that are approved for use with

this computer. Use of another type of battery or AC adapter may risk
fire or explosion.

Satellite M100 iii

■ Before you connect the computer to a power source, ensure that the

voltage rating of the AC adapter matches that of the available power
source.

115 V/60Hz in most of North and South America and some Far Eastern
countries such as Taiwan.

100 V/50Hz in eastern Japan and 100 V/60Hz in western Japan.
230 V/50 Hz in most of Europe, the Middle East, and the Far East.

■ If you use an extension cable with your AC adapter, ensure that the total

ampere rating of the products that are plugged into it do not exceed the
ampere rating of the extension cable itself.

■ To help avoid the potential hazard of electric shock, do not connect or

disconnect any cables or perform maintenance or reconfiguration of this
product during an electrical storm.

■ When setting up the computer for work, place it on a level surface.

■ Do not dispose of batteries in a fire. They may explode. Check with

local authorities for disposal instructions.

■ When traveling, do not check the computer as baggage. You can put

your computer through an X-ray security machine, but never put your
computer through a metal detector. If you have the computer checked
by hand, be sure to have a charged battery available in case you are
asked to turn on the computer.

■ When traveling with the hard drive removed from the computer, wrap

the drive in a non-conducting material, such as cloth or paper. If you
have the drive checked by hand, be ready to install the drive in the
computer. Your can put the hard drive through an X-ray security
machine, but never put it through a metal detector.

■ When traveling, do not place the computer in overhead storage

compartments where it could slide around. Do not drop your computer
or subject it to other mechanical shocks.

■ Protect your computer, battery, and hard drive from environmental

hazards such as dirt, dust, food, liquids, temperature extremes, and
overexposure to sunlight.

■ When you move your computer between environments with very

different temperature and/or humidity ranges, condensation may form
on or within the computer. To avoid damaging the computer, allow
sufficient time for the moisture to evaporate before using the computer.

■ When you disconnect a cable, pull on its connector or on its strain relief

loop, not on the cable itself. As you pull out the connector, keep it evenly
aligned to avoid bending any connector pins. Also, before you connect
a cable make sure both connectors are correctly oriented and aligned.

■ Before you clean your computer, turn if off, unplug it from its power

source, and remove the battery.

■ Handle components with care. Hold a component such as a memory

module by its edges, not its pins.

iv Satellite M100

When using telephone equipment in conjunction with your computer, basic
safety precautions should always be followed to reduce the risk of fire,
electric shock and injury to persons, including the following:

■ Do not use this product near water, for example, near a bathtub, washing

bowl, kitchen sink or laundry tub, in a wet basement or near a swimming
pool.

■ Avoid using a telephone (other than a cordless type) during an electrical

storm. There may be a remote risk of electric shock from lightning.

■ Do not use the telephone to report a gas leak in the vicinity of the leak.

■ Use only the power cord indicated in this manual.

■ Replace only with the same or equivalent type battery recommended by

the manufacturer.

■ Dispose of used batteries according to the manufacturer's instructions.

■ To reduce the risk of fire, use only No. 26 AWG or larger

telecommunication line cord.

Use only the battery pack that came with the computer or an optional battery
pack. Use of the wrong battery could damage your computer.

TOSHIBA assumes no liability for any damage in such case.

Satellite M100 v

FCC information

Model Name: Satellite M100

FCC notice "Declaration of Conformity Information"

This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in
a residential installation.

This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:

■ Reorient or relocate the receiving antenna.

■ Increase the separation between the equipment and receiver.

■ Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

■ Consult the dealer or an experienced radio/TV technician for help.

Only peripherals complying with the FCC class B limits may be attached to
this equipment. Operation with non-compliant peripherals or peripherals
not recommended by TOSHIBA is likely to result in interference to radio and
TV reception. Shielded cables must be used between the external devices
and the computer's or expansion unit's external monitor port, parallel port,
USB port and microphone jack. Changes or modifications made to this
equipment, not expressly approved by TOSHIBA or parties authorized by
TOSHIBA could void the user's authority to operate the equipment.

EMC Regulatory Information

Contact

Address: TOSHIBA America Information Systems, Inc.

9740 Irvine Boulevard
Irvine, California 92618-1697

Telephone: [phone]

vi Satellite M100

EU Declaration of Conformity

TOSHIBA declares, that the product: Satellite M100 conforms to the
following Standards:

This product is labelled with the CE Mark in accordance with the related
European Directives, notably Electromagnetic Compatibility Directive 89/
336/EEC for the notebook and the electronic accessories including the
supplied power adapter, the Radio Equipment and Telecommunications
Terminal Equipment Directive 99/5/EEC in case of implemented
telecommunication accessories and the Low Voltage Directive 73/23/EEC
for the supplied power adapter.

CE Marking is the responsibility of TOSHIBA EUROPE GmbH,
Hammfelddamm 8, 41460 Neuss, Germany, phone [phone].

For a copy of the related CE Declaration of Conformity please refer to the
following website: http://epps.toshiba-teg.com.

Canadian Regulatory Information (Canada Only)

This digital apparatus does not exceed the Class B limits for radio noise
emissions from digital apparatus as set out in the Radio Interference
Regulation of the Canadian Department of Communications.

Note that Canadian Department of Communications (DOC) regulations
provide, that changes or modifications not expressly approved by TOSHIBA
Corporation could void your authority to operate this equipment.

This Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.

Cet appareil numérique de la class B respecte toutes les exgences du
Règlement sur le matériel brouilleur du Canada.

BSMI Notice (Taiwan Only)

Satellite M100 vii

Following information is only for EU-member states:

The symbol indicates that this product may not be treated as
household waste. Please ensure this product is properly
disposed as inappropriate waste handling of this product may
cause potential hazards to the environment and human health.
For more detailed information about recycling of this product,
please contact your local city office, your household waste
disposal service or the shop where you purchased the product.

This symbol may not stick depending on the country and region where you
purchased.

Optical Disc Drive Safety Instruction

■ Be sure to check the international precautions at the end of this section.

The optical drive that is used in this computer is equipped with a laser
device. A classification label with the following sentence is affixed to the
surface of the drive.

CLASS 1 LASER PRODUCT
LASER KLASSE 1
LUOKAN 1 LASERLAITE
APPAREIL A LASER DE CLASSE 1
KLASS 1 LASER APPARAT

The drive with the above label is certified by the manufacturer that the drive
complies with the requirement for laser product on the date of
manufacturing pursuant to article 21 of Code of Federal Regulations by the
United States of America, Department of Health & Human Services, Food
and Drug Administration.

In other countries, the drive is certified to comply with the requirement
pursant to IEC 825 and EN60825 on class 1 laser product.

This computer is equipped with one of the optical drive from next page
according to the model

viii Satellite M100

Panasonic

CD-RW/DVD-ROM UJDA770TBE-W

■ The CD-RW/DVD-ROM drive employs a laser system. To ensure proper

use of this product, please read this instruction manual carefully and
retain for future reference. Should the unit ever require maintenance,
contact an authorized service location.

■ Use of controls, adjustments or the performance of procedures other

than those specified may result in hazardous radiation exposure.

■ To prevent direct exposure to the laser beam, do not try to open the

enclosure.

Location of the required label

SERIAL NO.
MANUFACTURED:

COMPLIES WITH FDA RADIA TION
PERFORMANCE STANDARDS, 21 CFR
SUBCHAPTER J.

CLASS 1 LASER PRODUCT
LASER KLASSE 1

Panasonic Communications Co., Ltd.
1-62, 4-Chome Minoshima, Hakata-Ku
Fukuoka, Japan

Satellite M100 ix

TOSHIBA Samsung Storage Technology Korea Corporation

CD-RW/DVD-ROM TS-L462D

■ The CD-RW/DVD-ROM drive employs a laser system. To ensure proper

use of this product, please read this instruction manual carefully and
retain for future reference. Should the unit ever require maintenance,
contact an authorized service location.

■ Use of controls, adjustments or the performance of procedures other

than those specified may result in hazardous radiation exposure.

■ To prevent direct exposure to the laser beam, do not try to open the

enclosure.

Location of the required label

SERIAL NO.
MANUFACTURED:

COMPLIES WITH FDA RADIA TION
PERFORMANCE STANDARDS, 21 CFR
SUBCHAPTER J.

CLASS 1 LASER PRODUCT
LASER KLASSE 1

TOSHIBA Samsung Storage Technology
Korea Corporation
416, Maetan-3Dong, Yeongtong-Gu, Suwon City,
Gyeonggi-Do, 443-742, Korea

x Satellite M100

Pioneer

DVD Super Multi DVR-K17TBS

■ The DVD Super Multi drive employs a laser system. To ensure proper

■ Use of controls, adjustments or the performance of procedures other

■ To prevent direct exposure to the laser beam, do not try to open the

use of this product, please read this instruction manual carefully and
retain for future reference. Should the unit ever require maintenance,
contact an authorized service location.

than those specified may result in hazardous radiation exposure.

enclosure.

Location of the required label

SERIAL NO.
MANUFACTURED:

COMPLIES WITH FDA RADIA TION
PERFORMANCE STANDARDS, 21 CFR
SUBCHAPTER J.

CLASS 1 LASER PRODUCT
LASER KLASSE 1

PIONEER CORPORATION
4-1, MEGURO 1-CHOME
MEGURO-KU, T OKYO, 153-8654

Satellite M100 xi

Panasonic

DVD Super Multi UJ-850UTJH-A

■ The DVD Super Multi drive employs a laser system. To ensure proper

use of this product, please read this instruction manual carefully and
retain for future reference. Should the unit ever require maintenance,
contact an authorized service location.

■ Use of controls, adjustments or the performance of procedures other

than those specified may result in hazardous radiation exposure.

■ To prevent direct exposure to the laser beam, do not try to open the

enclosure.

Location of the required label

SERIAL NO.
MANUFACTURED:

COMPLIES WITH FDA RADIA TION
PERFORMANCE STANDARDS, 21 CFR
SUBCHAPTER J.

CLASS 1 LASER PRODUCT
LASER KLASSE 1

Panasonic Communications Co., Ltd.
1-62, 4-Chome Minoshima, Hakata-Ku
Fukuoka, Japan

xii Satellite M100

Hitachi-LG Data Storage, Inc.

DVD Super Multi GSA-T10N

■ The DVD Super Multi drive employs a laser system. To ensure proper

use of this product, please read this instruction manual carefully and
retain for future reference. Should the unit ever require maintenance,
contact an authorized service location.

■ Use of controls, adjustments or the performance of procedures other

than those specified may result in hazardous radiation exposure.

■ To prevent direct exposure to the laser beam, do not try to open the

enclosure.

Location of the required label

SERIAL NO.
MANUFACTURED:

COMPLIES WITH FDA RADIA TION
PERFORMANCE STANDARDS, 21 CFR
SUBCHAPTER J.

CLASS 1 LASER PRODUCT
LASER KLASSE 1

Hitachi-LG Data Storage, Inc.
22-23, Kaigan 3-chome, Minato-ku,
Yokyo, 108-0022 Japan

Satellite M100 xiii

International Precaution

CAUTION: This appliance contains a laser system
and is classified as a "CLASS 1 LASER
PRODUCT." To use this model properly, read the
instruction manual carefully and keep this manual
for your future reference. In case of any trouble
with this model, please contact your nearest
"AUTHORIZED service station." To prevent direct
exposure to the laser beam, do not try to open the
enclosure.

VORSICHT: Dieses Gerät enthält ein Laser­System und ist als "LASERSCHUTZKLASSE 1
PRODUKT" klassifiziert. Für den richtigen
Gebrauch dieses Modells lesen Sie bitte die
Bedienungsanleitung sorgfältig durch und
bewahren diese bitte als Referenz auf. Falls
Probleme mit diesem Modell auftreten,
benachrichtigen Sie bitte die nächste "autorisierte
Service-Vertretung". Um einen direkten Kontakt
mit dem Laserstrahl zu vermeiden darf das Gerät
nicht geöffnet werden.

xiv Satellite M100

ADVARSEL: Denne mærking er anbragt
udvendigt på apparatet og indikerer, at apparatet
arbejder med laserstråler af klasse 1, hviket
betyder, at der anvendes laserstrlier af svageste
klasse, og at man ikke på apparatets yderside kan
bilve udsat for utilladellg kraftig stråling.

APPARATET BOR KUN ÅBNES AF FAGFOLK
MED SÆRLIGT KENDSKAB TIL APPARATER
MED LASERSTRÅLER!

Indvendigt i apparatet er anbragt den her gengivne
advarselsmækning, som advarer imod at foretage
sådanne indgreb i apparatet, at man kan komme
til at udsætte sig for laserstråling.

OBS! Apparaten innehåller laserkomponent som
avger laserstråining överstigande gränsen för
laserklass 1.

VAROITUS. Suojakoteloa si saa avata. Laite
sisältää laserdiodin, joka lähetää näkymätöntä
silmilie vaarallista lasersäteilyä.

CAUTION: USE OF CONTROLS OR
ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED
IN THE OWNER'S MANUAL MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.

VORSICHT: DIE VERWENDUNG VON ANDEREN
STEURUNGEN ODER EINSTELLUNGEN ODER
DAS DURCHFÜHREN VON ANDEREN
VORGÄNGEN ALS IN DER
BEDIENUNGSANLEITUNG BESCHRIEBEN
KÖNNEN GEFÄHRLICHE
STRAHLENEXPOSITIONEN ZUR FOLGE HABEN.

Satellite M100 xv

Modem warning notice

Conformity Statement

The equipment has been approved to [Commission Decision "CTR21"] for
pan- European single terminal connection to the Public Switched Telephone
Network (PSTN).

However, due to differences between the individual PSTNs provided in
different countries/regions the approval does not, of itself, give an
unconditional assurance of successful operation on every PSTN network
termination point.

In the event of problems, you should contact your equipment supplier in the
first instance.

Network Compatibility Statement

This product is designed to work with, and is compatible with the following
networks. It has been tested to and found to confirm with the additional
requirements conditional in EG 201 121.

Germany ATAAB AN005,AN006,AN007,AN009,AN010 and

DE03,04,05,08,09,12,14,17
Greece ATAAB AN005,AN006 and GR01,02,03,04
Portugal ATAAB AN001,005,006,007,011 and

Spain ATAAB AN005,007,012, and ES01
Switzerland ATAAB AN002
Norway ATAAB AN002, 005, 007 and

All other countries/
regions

Specific switch settings or software setup are required for each network,
please refer to the relevant sections of the user guide for more details.

The hookflash (timed break register recall) function is subject to separate
national type approvals. It has not been tested for conformity to national
type regulations, and no guarantee of successful operation of that specific
function on specific national networks can be given.

Japan regulations

P03,04,08,10

NO 01, 02

ATAAB AN003,004

Region selection

If you are using the computer in Japan, technical regulations described in
the Telecommunications Business Law require that you select the Japan
country mode.

It is illegal to use the modem in Japan with any other selection.

xvi Satellite M100

Redial

Up to two redial attempts can be made. If more than two redial attempts
are made, the modem will return Black Listed. If you are experiencing
problems with the Black Listed code, set the interval between redials at one
minute or longer.

Japan's Telecommunications Business Law permits up to two redials on
analogue telephones, but the redials must be made within a total of three
minutes.

The internal modem is approved by Japan Approvals Institute for
Telecommunications Equipment.

or

Pursuant to FCC CFR 47, Part 68:

When you are ready to install or use the modem, call your local telephone
company and give them the following information:

■ The telephone number of the line to which you will connect the modem

■ The registration number that is located on the device

The FCC registration number of the modem will be found on either the device
which is to be installed, or, if already installed, on the bottom of the computer
outside of the main system label.

■ The Ringer Equivalence Number (REN) of the modem, which can vary.

For the REN of your modem, refer to your computer's user's guide.

The modem connects to the telephone line by means of a standard jack
called the US:AGSMD01BATHENS or AGSMD01BDELPHI.

Type of service

Your modem is designed to be used on standard-device telephone lines.
Connection to telephone company-provided coin service (central office
implemented systems) is prohibited. Connection to party lines service is
subject to state tariffs. If you have any questions about your telephone line,
such as how many pieces of equipment you can connect to it, the telephone
company will provide this information upon request.

Satellite M100 xvii

Telephone company procedures

The goal of the telephone company is to provide you with the best service
it can. In order to do this, it may occasionally be necessary for them to make
changes in their equipment, operations, or procedures. If these changes
might affect your service or the operation of your equipment, the telephone
company will give you notice in writing to allow you to make any changes
necessary to maintain uninterrupted service.

If problems arise

If any of your telephone equipment is not operating properly, you should
immediately remove it from your telephone line, as it may cause harm to the
telephone network. If the telephone company notes a problem, they may
temporarily discontinue service. When practical, they will notify you in
advance of this disconnection.

If advance notice is not feasible, you will be notified as soon as possible.
When you are notified, you will be given the opportunity to correct the
problem and informed of your right to file a complaint with the FCC. In the
event repairs are ever needed on your modem, they should be performed
by TOSHIBA Corporation or an authorized representative of TOSHIBA
Corporation.

Disconnection

If you should ever decide to permanently disconnect your modem from its
present line, please call the telephone company and let them know of this
change.

Fax branding

The Telephone Consumer Protection Act of 1991 makes it unlawful for any
person to use a computer or other electronic device to send any message
via a telephone fax machine unless such message clearly contains in a
margin at the top or bottom of each transmitted page or on the first page
of the transmission, the date and time it is sent and an identification of the
business, other entity or individual sending the message and the telephone
number of the sending machine or such business, other entity or individual.
In order to program this information into your fax modem, you should
complete the setup of your fax software before sending messages.

xviii Satellite M100

Instructions for IC CS-03 certified equipment

1. NOTICE: The Industry Canada label identifies certified equipment. This

certification means that the equipment meets certain
telecommunications network protective, operational and safety
requirements as prescribed in the appropriate Terminal Equipment
Technical Requirements document(s). The Department does not
guarantee the equipment will operate to the user's satisfaction.

Before installing this equipment, users should ensure that it is
permissible to be connected to the facilities of the local
telecommunications company. The equipment must also be installed
using an acceptable method of connection.

The customer should be aware that compliance with the above
conditions may not prevent degradation of service in some situations.
Repairs to certified equipment should be coordinated by a
representative designated by the supplier. Any repairs or alterations
made by the user to this equipment, or equipment malfunctions, may
give the telecommunications company cause to request the user to
disconnect the equipment.

Users should ensure for their own protection that the electrical ground
connections of the power utility, telephone lines and internal metallic
water pipe system, if present, are connected together. This precaution
may be particularly important in rural areas.

Users should not attempt to make such connections themselves, but should
contact the appropriate electric inspection authority, or electrician, as
appropriate.

2. The user manual of analog equipment must contain the equipment's

Ringer Equivalence Number (REN) and an explanation notice similar to
the following: The Ringer Equivalence Number (REN) of the modem,
which can vary. For the REN of your modem, refer to your computer's
user's guide.

The Ringer Equivalence Number (REN) assigned to each terminal device
provides an indication of the maximum number of terminals allowed to be
connected to a telephone interface. The termination on an interface may
consist of any combination of devices subject only to the requirement that
the sum of the Ringer Equivalence Numbers of all the devices does not
exceed 5.

3. The standard connecting arrangement (telephone jack type) for this

equipment is jack type(s): US:AGSMD01BATHENS.
The IC registration number of the modem is shown below.
Canada: 4005B-ATHENS

Satellite M100 xix

Notes for Users in Australia and New Zealand

Modem warning notice for Australia

Modems connected to the Australian telecoms network must have a valid
Austel permit. This modem has been designed to specifically configure to
ensure compliance with Austel standards when the country/region selection
is set to Australia.

The use of other country/region setting while the modem is attached to the
Australian PSTN would result in your modem being operated in a non­compliant manner. To verify that the country/region is correctly set, enter
the command ATI which displays the currently active setting.

To set the country/region permanently to Australia, enter the following
command sequence:

■ AT%TE=1

■ ATS133=1

■ AT&F

■ AT&W

■ AT%TE=0

■ ATZ

Failure to set the modem to the Australia country/region setting as shown
above will result in the modem being operated in a non-compliant manner.
Consequently, there would be no permit in force for this equipment and the
Telecoms Act 1991 prescribes a penalty of $12,000 for the connection of
non-permitted equipment.

xx Satellite M100

Notes for use of this device in New Zealand

■ The grant of a Telepermit for a device in no way indicates Telecom

acceptance of responsibility for the correct operation of that device
under all operating conditions. In particular the higher speeds at which
this modem is capable of operating depend on a specific network
implementation which is only one of many ways of delivering high quality
voice telephony to customers. Failure to operate should not be reported
as a fault to Telecom.

■ In addition to satisfactory line conditions a modem can only work

properly if:
a/ it is compatible with the modem at the other end of the call and
b/ the application using the modem is compatible with the application

at the other end of the call - e.g., accessing the Internet requires
suitable software in addition to a modem.

■ This equipment shall not be used in any manner which could constitute

a nuisance to other Telecom customers.

■ Some parameters required for compliance with Telecom's PTC

Specifications are dependent on the equipment (PC) associated with
this modem. The associated equipment shall be set to operate within
the following limits for compliance with Telecom Specifications:

a/ There shall be no more than 10 call attempts to the same number
within any 30 minute period for any single manual call initiation, and

b/ The equipment shall go on-hook for a period of not less than 30
seconds between the end of one attempt and the beginning of the next.

c/ Automatic calls to different numbers shall be not less than 5 seconds
apart.

■ Immediately disconnect this equipment should it become physically

damaged, and arrange for its disposal or repair.

■ The correct settings for use with this modem in New Zealand are as

follows:
ATB0 (CCITT operation)
AT&G2 (1800 Hz guard tone)
AT&P1 (Decadic dialing make-break ratio =33%/67%
ATS0=0 (not auto answer)
ATS10=less than 150 (loss of carrier to hangup delay, factory default of

15 recommended)
ATS11=90 (DTMF dialing on/off duration=90 ms)
ATX2 (Dial tone detect, but not (U.S.A.) call progress detect)

■ When used in the Auto Answer mode, the S0 register must be set with

a value of 3 or 4. This ensures:
(a) a person calling your modem will hear a short burst of ringing before

the modem answers. This confirms that the call has been successfully
switched through the network.

(b) caller identification information (which occurs between the first and
second ring cadences) is not destroyed.

Satellite M100 xxi

■ The preferred method of dialing is to use DTMF tones (ATDT...) as this

is faster and more reliable than pulse (decadic) dialing. If for some reason
you must use decadic dialing, your communications program must be
set up to record numbers using the following translation table as this
modem does not implement the New Zealand "Reverse Dialing"
standard.

Number to be dialed: 0 1 2 3 4 5 6 7 8 9
Number to program into computer: 0 9 8 7 6 5 4 3 2 1
Note that where DTMF dialing is used, the numbers should be entered

normally.

■ The transmit level from this device is set at a fixed level and because of

this there may be circumstances where the performance is less than
optimal. Before reporting such occurrences as faults, please check the
line with a standard Telepermitted telephone, and only report a fault if
the phone performance is impaired.

■ It is recommended that this equipment be disconnected from the

Telecom line during electrical storms.

■ When relocating the equipment, always disconnect the Telecom line

connection before the power connection, and reconnect the power first.

■ This equipment may not be compatible with Telecom Distinctive Alert

cadences and services such as FaxAbility.
( NOTE THAT FAULT CALL OUT CAUSED BY ANY OF THE ABOVE

CAUSES MAY INCUR A CHARGE FROM TELECOM )

General conditions

As required by PTC 100, please ensure that this office is advised of any
changes to the specifications of these products which might affect
compliance with the relevant PTC Specifications.

The grant of this Telepermit is specific to the above products with the
marketing description as stated on the Telepermit label artwork. The
Telepermit may not be assigned to other parties or other products without
Telecom approval.

A Telepermit artwork for each device is included from which you may
prepare any number of Telepermit labels subject to the general instructions
on format, size and colour on the attached sheet.

The Telepermit label must be displayed on the product at all times as proof
to purchasers and service personnel that the product is able to be
legitimately connected to the Telecom network.

The Telepermit label may also be shown on the packaging of the product
and in the sales literature, as required in PTC 100.

The charge for a Telepermit assessment is $337.50. An additional charge
of $337.50 is payable where an assessment is based on reports against
non-Telecom New Zealand Specifications. $112.50 is charged for each
variation when submitted at the same time as the original.

An invoice for $NZ1237.50 will be sent under separate cover.

xxii Satellite M100

Important Notice

Copyrighted works including, but not limited to music, video, computer
program, databases are protected by copyright laws. Unless specifically
permitted under applicable copyright laws, you cannot copy, modify,
assign, transmit or otherwise dispose of any copyrighted work with the
consent of the owner of the copyright.

Please take notice that unauthorized copying, modification, assignment,
transmission and disposition may be subject to claims for damages and
penalties.

General Precautions

TOSHIBA computers are designed to optimize safety, minimize strain and
withstand the rigors of portability. However, certain precautions should be
observed to further reduce the risk of personal injury or damage to the
computer.

Be certain to read the general precautions below and to note the cautions
included in the text of the manual.

Stress injury

Carefully read the Safety Instruction Manual. It contains information on
prevention of stress injuries to your hands and wrists that can be caused by
extensive keyboard use. Chapter 3, Getting Started, also includes
information on work space design, posture and lighting that can help reduce
physical stress.

Heat injury

■ Avoid prolonged physical contact with the bottom of the computer. If

the computer is used for long periods, its surface can become very
warm. While the temperature will not feel hot to the touch, if you maintain
physical contact with the computer for a long time (if you rest the
computer on your lap, for example) your skin might suffer low-heat injury.

■ If the computer has been used for a long time, avoid direct contact with

the metal plate supporting the I/O ports. It can become hot.

■ The surface of the AC adapter can become hot when in use. This

condition does not indicate a malfunction. If you need to transport the
AC adapter, disconnect it and let it cool before moving it.

■ Do not lay the AC adapter on a material that is sensitive to heat. The

material could be damaged.

Pressure or impact damage

Do not apply heavy pressure to the computer or subject it to strong impact.
Excessive pressure or impact can damage computer components or

otherwise cause malfunctions.

Satellite M100 xxiii

PC Card overheating

Some PC Cards can become hot with prolonged use. Overheating of a PC
Card can result in errors or instability in the PC Card operation. Also be
careful when you remove a PC Card that has been used for a long time.

Mobile phone

Use of mobile phones can interfere with the audio system. Computer
operation is not impaired but it is recommended that a distance of 30cm be
maintained between the computer and a mobile phone in use.

LCD

Over a period of time, and depending on the usage of the computer, the
brightness of the LCD screen will deteriorate. This is an intrinsic
characteristic of LCD technology. Maximum brightness is only available
when operating in AC power mode. The screen will dim when the computer
is operated on battery power and you may not be able to increase the
brightness of the screen.

CE compliance

This product and the supplied accessories are designed to observe the
related EMC (Electromagnetic Compatibility) and safety standards.
However, TOSHIBA cannot guarantee that this product still observes these
EMC standards if accessories or cables not manufactured / distributed by
TOSHIBA are connected or implemented. To avoid in general EMC
problems, the following advice should be observed:

■ Only CE marked accessories should be connected / implemented

■ Only best shielded cables should be connected

xxiv Satellite M100

Working environment

This product was designed to fulfill the EMC (Electromagnetic Compatibility)
requirements for "residential, commercial and light industry environments".

The following environment is not approved:

■ Industrial Environments (e.g. environments where a with a mains voltage

of 380V threephase is being used).

In the following environments the use of this product can be restricted:

■ Medical Environments: This product is not certified as a medical product

according to the Medical Product Directive 93/42/EEC, but can be used
in office areas where the use is not restricted. Please disable the wireless
LAN or Bluetooth hardware in such areas as long this feature is not
official supported by the operator of the related medical facility.

■ Vehicle Environments: Please read operator’s manual of the vehicle

manufacturer for further restrictions of use.

■ Aircraft Environments: Please following the advices of the flight

personnel regarding restrictions of use.

Any consequences resulting from the use of this product in working
environments that are not approved or the use is restricted are not the
responsibility of Toshiba Corporation. The consequences of the use of this
product in those working environments may be:

■ Interference with other devices or machines in the nearby surrounding

area

■ Malfunction of, or data loss from, this product caused by disturbances

generated by other devices or machines in the nearby surrounding area

Furthermore, for general safety reasons, the use of this product in
environments with explosive atmospheres is not permitted.

Network connection (Class A warning)

If this product has networking capabilities and will be connected to a
network, Class A radiation limits will be observed (in accordance with
technical conventions). This means that if the product will be used in a
domestic environment, other devices in the near surrounding area may
suffer interference. Consequently, please do not use this product in such
environments (for example a living room), otherwise you could be held
responsible for any ensuing interference.

Information on the secure writing to optical disc media

Even if your software gives no indication that any problems have occurred,
you should always check to ensure that information has been successfully
stored on recordable optical media (CD-R, CD-RW and so forth).

Satellite M100 xxv

Wireless LAN and your Health

Wireless LAN products, like other radio devices, emit radio frequency
electromagnetic energy. The level of energy emitted by Wireless LAN
devices however is far less than the electromagnetic energy emitted by other
wireless devices such as mobile phones.

Because Wireless LAN products operate within the guidelines found in radio
frequency safety standards and recommendations, TOSHIBA believes
Wireless LAN is safe for use by consumers. These standards and
recommendations reflect the consensus of the scientific community and
result from deliberations of panels and committees of scientists who
continually review and interpret the extensive research literature.

In some situations or environments, the use of Wireless LAN may be
restricted by the proprietor of the building or responsible representatives of
the organisation. These situations may for example include:

■ Using the Wireless LAN equipment on board of aeroplanes

■ In any other environment where the risk of interference to other devices

or services is perceived or identified as harmful.

If you are uncertain of the policy that applies on the use of wireless devices
in a specific organisation or environment (e.g. airports), you are encouraged
to ask for authorisation to use the Wireless LAN device prior to turning on
the equipment.

Safety Instruction for Wireless Products

If your computer has a wireless function, all safety instructions must be read
carefully and must be fully understood, before you attempt to use it. This
manual contains the safety instructions that must be observed in order to
avoid potential hazards that could result in personal injuries or could
damage your wireless products.

Limitation of Liability

For damage occurring due to an earthquake or thunder, fire beyond our
responsibility, action by third party, other accident, intentional or accidental
mistakes by a user, misuse or use under abnormal conditions, we do not
take any responsibility.

For incidental damage (loss of business profit, business interruption, etc.)
occurring due to use or disability of the product, we do not take any
responsibility.

For damage occurring due to non observance of the contents described in
the instruction manual, we do not take any responsibility.

For damage occurring due to erroneous operation or hang up caused by
use in combination with products not related to our company, we do not
take any responsibility.

xxvi Satellite M100

Usage Restrictions

Do not use the Wireless Products for controlling the following equipment:

■ Equipment directly linked with human life corresponding to the following.

■ Medical equipment such as life support systems, equipment used in

operations, etc.

■ Exhaust systems for gases such as poisonous gas etc. and exhaust

systems for smoke.

■ Equipment that must be set up in compliance with various laws such

as the Fire Services Act, the Construction Standard Act, etc.

■ Equipment corresponding to that mentioned above.

■ Equipment linked with human safety or having a serious influence on the

safe maintenance of public function, etc., because it is not designed or
manufactured for this type of use.

■ Traffic control equipment for air, railroad, road, marine transport, etc.

■ Equipment used in atomic power plants etc.

■ Equipment corresponding to that mentioned above.

Satellite M100 xxvii

Warning

Turn OFF the Wireless Communication switch of wireless products in a
congested place, such as a crowded commuter train.

Keep this product away from a cardiac pacemaker at least 22cm.
Radio waves can potentially affect cardiac pacemaker operation, thereby

causing respiratory troubles.
Turn OFF the Wireless communication switch inside a medical facility or

near medical electric equipment. Do not bring medical electric equipment
close to the product.

Radio waves can potentially affect medical electric equipment, thereby
causing an accident due to malfunction.

Turn OFF the Wireless communication switch near an automatic door, fire
alarm or other automatic control equipment.

Radio waves can potentially affect automatic control equipment, thereby
causing an accident due to malfunction.

Do not turn ON the Wireless communication switch in aircraft or in places
that generate or can generate radio interference.

Radio waves can potentially affect equipment, such as that used on-board
aircraft, causing an accident due to malfunction.

You should monitor possible radio interference or other issues that may arise
with other equipment while the product is used. If any effect is noted, turn
OFF the Wireless communication switch.

Otherwise, radio waves can potentially affect other equipment, thereby
causing an accident due to malfunction.

When using the product in a car, check with the automobile dealer if the car
has an adequate electromagnetic compatibility (EMC).

Radio waves of the product can potentially hamper safe driving.
Depending on car model, the product can rarely affect car electronic

equipment if it is used in a car.

Note

Do not use this product in the following places:
Near a microwave oven or other environment which generates a magnetic

field.
Near any place or equipment that generates static electricity or radio

interference.
Depending on the environment, in a place where radio waves cannot reach

the product.

xxviii Satellite M100

Satellite M100

Table of Contents

Preface

Manual contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .xxx

Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxxi

Equipment checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxxii

Chapter 1 Satellite M100 Features

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

Special features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-9

TOSHIBA Value Added Package . . . . . . . . . . . . . . . . . . . . . . . . 1-11

Utilities and Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-12

Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-14

Chapter 2 The Grand Tour

Front with the display closed. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

Right side . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

Left side . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4

Back side . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5

Underside. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6

Front with the display open . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7

Keyboard Indicators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-10

Optical Disc drive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-10

User’s Manual xxv

Chapter 3 Getting Started

Setting up your work space. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

Connecting the AC adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5

Opening the display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6

Turning on the power. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6

Starting up for the first time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7

Turning off the power. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7

Restarting the computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-11

System Recovery Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-11

Restoring the preinstalled software from

the Product Recovery disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-12

Chapter 4 Operating Basics

Using the TouchPad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1

Using the Fingerprint Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2

Using the internal modem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-10

LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-13

Wireless LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-14

Using optical disc drives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-16

Writing CDs on a CD-RW/DVD-ROM drive . . . . . . . . . . . . . . . . 4-21

Writing CDs/DVDs on a DVD Super Multi drive

supporting double layer disc recording . . . . . . . . . . . . . . . . . . . 4-23

When Using Ulead DVD MovieFactory

TOSHIBA Disc Creator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-30

Media Care. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-31

Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-32

TV-Out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-32

Setting up more than one display . . . . . . . . . . . . . . . . . . . . . . . 4-33

Cleaning the computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-33

Moving the computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-34

®

for TOSHIBA . . . . . . . 4-27

Chapter 5 The Keyboard

Typewriter keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1

F1 ... F12 function keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2

Soft keys: Fn key combinations. . . . . . . . . . . . . . . . . . . . . . . . . . 5-2

Hotkeys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3

Windows special keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4

Keypad overlay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4

Generating ASCII characters . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6

xxvi Satellite M100

Chapter 6 Power and Power-Up Modes

Power conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1

Power indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3

Battery types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4

Care and use of the battery pack . . . . . . . . . . . . . . . . . . . . . . . . 6-5

Replacing the battery pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-11

TOSHIBA Password Utility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-14

Power-up modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-15

Panel power off/on. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-15

System automatic Sleep/Hibernation . . . . . . . . . . . . . . . . . . . . 6-15

Chapter 7 HW Setup

Accessing HW Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1

HW Setup Window. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1

Chapter 8 Optional Devices

PC Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2

SD/MMC/MS/MS Pro/xD Memory cards. . . . . . . . . . . . . . . . . . . 8-4

Memory expansion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-7

Additional battery pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-15

Additional AC adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-15

Battery charger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-15

External monitor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-15

Television . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-16

i.LINK (IEEE1394) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-19

Security lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-20

Chapter 9 Troubleshooting

Problem solving process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1

Hardware and system checklist. . . . . . . . . . . . . . . . . . . . . . . . . . 9-3

TOSHIBA support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-19

Chapter 10 Disclaimers

CPU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-1

Memory (Main System) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-2

Battery Life. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-2

HDD Drive Capacity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-2

LCD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-2

Graphics Processor Unit (“GPU”) . . . . . . . . . . . . . . . . . . . . . . . 10-3

Wireless LAN/Intel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-3

Non-applicable Icons. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-3

Copy Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-3

Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-3

LCD Brightness and Eye Strain . . . . . . . . . . . . . . . . . . . . . . . . . 10-3

Satellite M100 xxvii

Appendix A Specifications

Appendix B Display Modes

Appendix C AC Power Cord and Connectors

Glossary

xxviii Satellite M100

Satellite M100

Preface

Congratulations on your purchase of the Satellite M100 computer. This
powerful notebook computer provides excellent expansion capability,
including multimedia devices, and it is designed to provide years of reliable,
high-performance computing.

This manual tells how to set up and begin using your Satellite M100
computer. It also provides detailed information on configuring your
computer, basic operations and care, using optional devices and
troubleshooting.

If you are a new user of computers or if you're new to portable computing,
first read over the Satellite M100 Features and The Grand Tour chapters to
familiarize yourself with the computer's features, components and
accessory devices. Then read Getting Started for step-by-step instructions
on setting up your computer.

If you are an experienced computer user, please continue reading the
preface to learn how this manual is organized, then become acquainted with
this manual by browsing through its pages. Be sure to look over the Special
features section of the Satellite M100 Features, to learn about features that
are unique to the computer.

User’s Manual xxix

Manual contents

This manual has ten chapters, three appendixes, a glossary and an index.
Chapter 1, Satellite M100 Features, is an overview of the computer's special

features, utilities, and options.
Chapter 2, The Grand Tour, identifies the components of the computer and

briefly explains how they function.
Chapter 3, Getting Started, provides a quick overview of how to begin

operating your computer and gives tips on safety and designing your work
area. Be sure to read the sections on setting up the operating system and
on restoring the preinstalled software.

Chapter 4, Operating Basics, includes instructions on using the following
devices: TouchPad, the optical disc drives, the internal modem, LAN and
wireless LAN. It also provides tips on care of the computer, disks and DVD/
CD-ROMs.

Chapter 5, The Keyboard, describes special keyboard functions including
the keypad overlay and hotkeys.

Chapter 6, Power and Power-Up Modes, gives details on the computer's
power resources.

Preface

Chapter 7, HW Setup, introduces you to the TOSHIBA Hardware Setup
program.

Chapter 8, Optional Devices, describes the optional hardware available.
Chapter 9, Troubleshooting, provides helpful information on how to perform

some diagnostic tests, and suggests courses of action if the computer
doesn't seem to be working properly.

Chapter 10, Disclaimers, provides disclaimer information related to your
computer.

The Appendices provide technical information about your computer.
The Glossary defines general computer terminology and includes a list of

acronyms used in the text.

xxx Satellite M100

Conventions

This manual uses the following formats to describe, identify, and highlight
terms and operating procedures.

Abbreviations

On first appearance, and whenever necessary for clarity, abbreviations are
enclosed in parentheses following their definition. For example: Read Only
Memory (ROM). Acronyms are also defined in the Glossary.

Icons

Icons identify ports, dials, and other parts of your computer. The indicator
panel also uses icons to identify the components it is providing information
on.

Keys

The keyboard keys are used in the text to describe many computer
operations. A distinctive typeface identifies the key top symbols as they
appear on the keyboard. For example, Enter identifies the Enter key.

Preface

Key operation

Some operations require you to simultaneously use two or more keys. We
identify such operations by the key top symbols separated by a plus sign
(+). For example, Ctrl + C means you must hold down Ctrl and at the same
time press C. If three keys are used, hold down the first two and at the same
time press the third.

DISKCOPY A: B: When procedures require an action such as

Display

ABC

clicking an icon or entering text, the icon's name

or the text you are to type in is represented in the

type face you see to the left.

Names of windows or icons or text generated by

the computer that appears on its display screen

is presented in the type face you see to the left.

Satellite M100 xxxi

Messages

Messages are used in this manual to bring important information to your
attention. Each type of message is identified as shown below.

Pay attention! A caution informs you that improper use of equipment or
failure to follow instructions may cause data loss or damage your equipment.

Please read. A note is a hint or advice that helps you make best use of your
equipment.

Terminology

This term is defined in this document as follows:

Preface

Start The word “Start” refers to the button in

Equipment checklist

Carefully unpack your computer. Save the box and packing materials for
future use. Check to make sure you have all the following items:

Hardware

■ Satellite M100 Series Portable Personal Computer

■ Universal AC Adapter and Power Cord

■ USB Floppy Disk Drive (provided with some models)

■ Modular cable for modem (provided with some models)

Microsoft

®

Windows Vista™.

xxxii Satellite M100

Software

The following Windows operating systemand utility software are pre­installed.

■ Microsoft

■ DVD Video Player

■ TOSHIBA Value Added Package

■ TOSHIBA ConfigFree

■ TOSHIBA Assist

■ TOSHIBA Disc Creator

■ TOSHIBA CD/DVD Drive Acoustic Silencer

■ TOSHIBA Hardware Setup

■ Windows Anytime Upgrades DVD (provided with some models)

■ Product Recovery disc (provided with some models)

■ Ulead DVD MovieFactory

■ TOSHIBA Fingerprint Utility

®

Windows Vista™

®

for TOSHIBA

Preface

■ TOSHIBA SD Memory Utilities

■ Online Manual

The system may not function properly if you use drivers that are not
preinstalled or distributed by TOSHIBA.

SD Memory Card Format Utility and other SD functions are packaged into
TOSHIBA SD Memoory Utilities. When uninstalling the SD utilities, click
Start -> Control Panel -> Uninstall a program, and select TOSHIBA SD
Memory Utilities.

Documentation

■ Your computer's documentation:

■ Satellite M100 Series Personal Computer User's Manual

■ Microsoft

models)

■ International Limited Warranty (ILW) Instruction (This instruction is

included only with computers sold in ILW supported areas.)

®

Windows Vista™ manual package (provided with some

If any of the items are missing or damaged, contact your dealer immediately.

Satellite M100 xxxiii

Preface

xxxiv Satellite M100

Satellite M100

Chapter 1

Satellite M100 Features

This chapter identifies the computer's special features, options and
accessories.

Basic features are described in a separate pamphlet.

Some of the features described in this manual may not function properly if
you use an operating system that was not preinstalled by TOSHIBA.

Features

Please visit your region's web site for the configuration details of the model
that you have purchased

Processor

Depending on the model you purchased:

®

Intel

Intel

Intel

Intel® Celeron® M Processor

Intel

Core™ 2 Duo Processor

®

Core™ Duo Processor

®

Core™ Solo Processor

®

Pentium® Dual-Core Processor

Disclaimer (CPU)

For more information on the Disclaimer regarding CPU, please refer to the
Disclaimers section in Chapter 10.

User’s Manual 1-1

Satellite M100 Features

Chip Set

Intel® 945PM Express Chipset or

Intel® 945GM Express Chipset

Realtek ALC861 Audio codec

TI PCI7412 for Multiple Digital Media Card Slot,

IEEE 1394 and PCMCIA controller.

®

Intel

82562GZ for 10/100Mbps LAN controller

or

®

Intel

82573L for 10M/100M/1Gbps LAN

controller

Memory

The graphics system in your computer may use part of the main system
memory for graphics performance and therefore reduce the amount of
system memory available for other computing activities. The amount of
system memory allocated to support graphics may vary depending on the
graphics system, applications utilized, system memory size and other
factors.

Slot Two SO-DIMM slots, upgradable up to 4GB can

be upgraded through memory the expansion slot

one in the bottom of your computer, another one

in the bottom of Keyboard. You need to remove

existing SO-DIMM if SO-DIMM is Maximum

upgradable system memory size is depending on

the system you purchased.

1-2 Satellite M100

Satellite M100 Features

Video RAM Depending on the model you purchased:

Up to 256MB integrated solution and shared with

®

main memory for Mobile Intel

945GM Express

Chipset

64MB or 128MB for local cache for ATI Mobility™

®

Radeon

X1300 with HyperMemory™

64MB,128MB or 256MB for local cache for ATI

Mobility™ Radeon® X1400 with HyperMemory™

HyperMemory™ VRAM size will vary depending

on system memory size.

®

The ATI Mobility™ Radeon

X1300/X1400 GPU
utilizes the additional bandwidth of PCI Express
to reach higher levels of graphics performance
than traditional graphics memory solutions. ATI
Mobility™ Radeon

®

X1300/X1400 GPU shares
the capacity and bandwidth of dedicated
graphics memory and dynamically available
system memory for turbocharged performance
and larger total graphics memory.

The VRAM capacity indicated in the ATI display is
the sum of the discreet graphics memory and the
maximum possible graphics memory allocated
dynamically by the system memory. The system
memory capacity indicated in the Microsoft

®

Windows PROPERTIES display is the maximum
possible system memory capacity without
adjustment for any system memory which may be
dynamically allocated to the graphics system
depending on demand.

BIOS

1MB Flash ROM for system BIOS
Suspend to memory or hard disk drive
Hardware password protection
Various Hotkey functions for system control
Complete ACPI 1.0b functionality

Satellite M100 1-3

Satellite M100 Features

Power

Battery Pack 6-cell Lithium Ion smart battery pack with 43.2

watt capacity (10.8V/4000mAH) or
9-cell Lithium Ion smart battery pack with 64.8

watt capacity (10.8V/6000mAH) or
12-cell Lithium Ion smart battery pack with 92.88

watt capacity (10.8V/8600mAH)
(Battery type depends on the model purchased.)
Approximately 12 hours or longer charging time

to 100% battery capacity with system switched
on.

Approximately 4 hours charge time to 100%
battery capacity with system switched off.

Approximately 2 days discharging time in Sleep
Mode for the 12-cell battery, 1.5 day for the 9-cell
battery and 1 days for 6-cell battery.

Discharge time in shutdown mode is
approximately 1 month

Disclaimer (Battery Life)

For more information on the Disclaimer regarding Battery Life, please refer
to the Disclaimers section in Chapter 10.

RTC Battery The computer has an internal battery to back up

its Real Time Clock (RTC), calender and setup
information. This battery will last for an average of
one month with no external power source.

AC adapter The universal AC adapter provides power to the

system and recharges the batteries when they are
low. It comes with a detachable power cord.

Floppy Disk Drive devices

External USB Floppy Disk Drive (depends on the
model purchased)

TouchPad

1-4 Satellite M100

A TouchPad and control buttons in the palm rest
enable control of the on-screen pointer.

Satellite M100 Features

Display

14.1” WXGA TFT screen with a resolution of 1280
horizontal x 800 vertical pixels

14.1" WXGA+ TFT screen with a resolution of
1440 horizontal x 900 vertical pixels

Disclaimer (LCD)

For more information on the Disclaimer regarding LCD, please refer to the
Disclaimers section in Chapter 10.

Graphics controller ATI Mobility™ Radeon® X1300/X1400

(Graphics controller chipset depends on the
model purchased)

The graphics controller maximizes display
performance. Refer to Display Modes section in
Appendix B for more information.

Disclaimer (Graphics Processor Unit ("GPU")

For more information on the Disclaimer regarding Graphic Processor Unit
("GPU"), please refer to the Disclaimers section in Chapter 10.

Disks

Fixed hard disk Depending on the model purchased, one of the

following drives will be installed:

40.0 billion bytes (37.26GB)

60.0 billion bytes (55.88GB)

80.0 billion bytes (74.52GB)

100.0 billion bytes (93.16GB)

120.0 billion bytes (111.78GB)

9.5m/m 2.5" hard disk drive support
Serial ATA I interface

Satellite M100 1-5

Satellite M100 Features

Disclaimer (HDD Drive Capacity)

For more information on the Disclaimer regarding HDD Drive Capacity,
please refer to the Disclaimers section in Chapter 10.

CD-RW/DVD-ROM
drive

Some models are equipped with a full-size CD­RW/DVD-ROM module that lets you record data
to rewritable CD/CD-RWs as well as run either
12cm (4.72") or 8cm (3.15") CD/DVDs without
using an adapter. It reads DVD-ROMs at
maximum 8 speed and CD-ROMs at maximum 24
speed. It writes CD-Rs at up to 24 speed, CD­RWs at up to 24 speed. This drive supports the
following formats:

■ DVD-ROM ■ DVD-Video

■ CD-R ■ CD-RW

■ CD-DA ■ CD-Text

■ Photo CD (single/multi-session)

■ CD-ROM Mode1, Mode2

■ CD-ROMXA Mode2 (Form1, Form2)

■ Enhanced CD(CD-EXTRA)

DVD-ROM drive Some models are equipped with a full-size DVD-

ROM module that lets run either 12cm (4.72") or
8cm (3.15") CD/DVDs without using an adapter.
It reads DVD-ROMs at maximum 8 speed and
CD-ROMs at maximum 24 speed. This drive
supports the following formats:

■ DVD-ROM ■ DVD-Video

■ CD-R ■ CD-RW

■ CD-DA ■ CD-Text

■ Photo CD (single/multi-session)

■ CD-ROM Mode1, Mode2

■ CD-ROMXA Mode2 (Form1, Form2)

■ Enhanced CD(CD-EXTRA)

1-6 Satellite M100

Satellite M100 Features

DVD Super Multi
drive with double
layer disc recording
support

Some models are equipped with a full-size DVD
Super Multi drive module with double layer
support that lets you record data to rewritable CD/
DVDs as well as run either 12cm (4.72") or 8cm
(3.15") CD/DVDs without using an adapter. It
reads DVD-ROMs at maximum 8 speed and CD­ROMs at maximum 24 speed. It writes CD-Rs at
up to 24 speed, CD-RWs at up to 10 s peed, DV D­Rs at maximum 8 speed, DVD-RWs at maximum
4 speed, DVD+RWs at maximum 4 speed,
DVD+Rs at maximum 8 speed, DVD+R (double
layer) at maximum 2.4 speed, DVD-R (dual layer)
at maximum 2 speed, and DVD-RAM at maximum
5 speed. This drive supports the same formats as
the CD-RW/DVD-ROM drive plus the following:

■ DVD-ROM ■ DVD-Video

■ DVD-R ■ DVD-RW

■ DVD+R ■ DVD+RW

■ DVD-RAM ■ DVD+R (double layer)

■ DVD-R (dual layer)

■ CD-R ■ CD-RW

■ CD-DA ■ CD-Text

■ Photo CD (single/multi-session)

■ CD-ROM Mode1, Mode2

■ CD-ROMXA Mode2 (Form1, Form2)

■ Enhanced CD (CD-EXTRA)

Computers in this series can be configured with multiple types of optical
disc drive. For more information on the optical disc drives available, talk to
your dealer. More information on using the optical disc drive can be found
in Chapter 4, Operating Basics.

Slots (depending on configuration)

PC Card Accommodates one type II device.

Multiple Digital
Media Card Reader
(SD/MMC/MS/MS
Pro/xD)

Lets you easily transfer data from five different
types of common multimedia memory card used
in a variety of devices, such as PDAs and digital
cameras.

Satellite M100 1-7

Satellite M100 Features

Ports (depending on configuration)

External monitor 15-pin analog VGA port supports VESA DDC2B

compatible functions.

Universal Serial Bus The computer has 4 Universal Serial Bus (USB)

ports that comply with the USB 2.0 standard,
which enables data transfer speeds more than 40
times faster than USB 1.1 (which this computer
also supports).

i.LINK (IEEE 1394) Enables high-speed data transfer directly from

external device such as digital video cameras.

TV Out The 4-pin S-Video port is compatible with PAL or

NTSC TV standard, supporting Macrovision 7.02
copy protection.

Multimedia

Sound system The integrated Windows compatible sound

system provides support for internal speakers as
well as jacks for an external microphone and
headphones.

Headphone jack A standard 3.5mm stereo jack is provided for the

connection of external headphones or speakers.

Microphone jack A standard 3.5 mm mini microphone jack enables

connection of monaural microphone input.

Communications

Modem Some computers in this series are equipped with

Modem functionality.
The internal modem provides capability for data

and fax communication. It supports the V.90 or
V.92 standards depending on the region and
provides a modem jack for connection to a
telephone line. The speed of data and fax transfer
depends on the analog telephone line conditions.

LAN The computer has built-in support for Ethernet

LAN (10 megabits per second, 10BASE-T), Fast
Ethernet LAN (100 Mbps 100BASE-TX), or Gigabit
Ethernet LAN (1000 Mbps, 1000BASE-T).

1-8 Satellite M100

Satellite M100 Features

Wireless LAN Some computers in this series are equipped with

a wireless LAN mini Card that is compatible with
other systems that support the 802.11a/g
wireless communications standards. It offers
frequency selection between 2.4GHz or 5GHz
and allows roaming over multiple channels.

Bluetooth Some computers in this series are equipped with

Bluetooth functionality.
Bluetooth is a short-range wireless technology

used to create PANs (Personal Area Networks)
among your devices, as well as with other nearby
devices such as cell phones and digital cameras.

Security

Power-on password protection
Two level password architecture

Security Lock Slot

Special features

The following features are either unique to TOSHIBA computers or are
advanced features, which make the computer more convenient to use.

Hotkeys Key combinations that let you quickly modify the

Display Automatic
Power off

Fingerprint authentication

Receives an optional security lock in order to
anchor the computer to a desk or other large,
heavy object.

system configuration directly from the keyboard
without running a system configuration program.

This feature automatically cuts off power to the
internal display when there is no input from the
keyboard or pointing device for a specified time
period. Power is restored when any key is pressed
or when there is input from a pointing device. You
can specify the time period in the Power Options.

Hard Disk Drive
Automatic Power Off

Satellite M100 1-9

This feature automatically cuts off power to the
hard disk drive when it is not accessed for a
specified time period. Power is restored when the
hard disk is accessed. You can specify the time
period in the Power Options.

Satellite M100 Features

System Automatic
Sleep/Hibernation

This feature automatically places the system into
either Sleep Mode or Hibernation Mode when
there is no input or hardware access for a
specified time period. You can specify the time
period and select either System Sleep or System
Hibernate in the Power Options.

Keypad Overlay A ten-key pad is integrated into the keyboard.

Refer to the Keypad overlay section in Chapter 5,
The Keyboard, for instructions on using the
keypad overlay.

Power-on Password Two levels of password security are available,

Supervisor and User, which can prevent
unauthorized access to your computer.

Battery Save Mode This feature lets you save battery power. You can

specify the level of system power management in
the Power Options.

Instant Security A specific hot key function locks the system

providing data security.

Panel Power Off/On This feature turns power to the computer off when

the display panel is closed and turns it back on
when the panel is opened. You can specify the
setting in the Power Options.

Low Battery
Automatic
Hibernation

When battery power is exhausted to the point that
computer operation cannot be continued, the
system automatically enters Hibernation Mode
and shuts itself down. You can specify the setting
in the Power Options.

Hibernation This feature lets you turn off the power without

exiting from your software. The contents of main
memory are saved to the hard disk. When you
turn on the power again, you can continue
working right where you left off. Refer to the

Turning off the power section in Chapter 3,
Getting Started, for details.

Sleep In Sleep Mode, power to the system remains on,

but the processor and all other devices are
effectively in 'sleep mode'. When the computer is
in Sleep Mode, the Power LED flashes amber. The
computer enters Sleep Mode regardless of the
Hibernate Mode setting. Refer to the Turning off
the power section in Chapter 3, Getting Started,
for details.

1-10 Satellite M100

Fingerprint Adds an additional layer of security to your files

by requiring a valid fingerprint to access them.

■ Before entering Sleep mode, be sure to save your data.

■ Do not install or remove a memory module while the computer is in Sleep

mode. The computer or the module could be damaged.

■ Do not remove the battery pack while the computer is in Sleep mode.

Data in memory will be lost.

TOSHIBA Value Added Package

This section describes the TOSHIBA Component features pre-installed on
the computer.

Satellite M100 Features

TOSHIBA Power
Saver

TOSHIBA Button
Support

TOSHIBA PC
Diagnostic Tool

TOSHIBA Flash
Cards

TOSHIBA
Components
Common Driver

TOSHIBA Power Saver provides you with the
features of more various power supply
managements.

This utility cotrols the following computer button
functions.

The applications associated with each of the
following button can be assigned by the user.

■ Mail Button: Assign applications of functions

to the 1 button (Windows mail).

The TOSHIBA PC Diagnostic Tool will display
basic system configuration information and allow
the functionality of some of the computer’s built­in hardware devices to be tested.

This utility supports the following functions,

■ Hot key function

■ TOSHIBA utility launcher function

TOSHIBA Components Common Driver contains
the module required for the utility which TOSHIBA
offers.

TOSHIBA
Accessibility

Satellite M100 1-11

The TOSHIBA Accessibility utility provides
support to movement impaireed users when they
need to use the TOSHIBA Hot-key functions. In
use, the utility allows you to make the Fn key
‘sticky’, that is you can press it once, release it,
and they press one of the ‘F’ keys in order to
access its specific function. When set, the Fn key
will remain active until another key is pressed.

Utilities and Applications

This section describes preinstalled utilities and tells how to start them. For
details on operations, refer to each utility’s online manual, help files or
readme.txt files.

TOSHIBA Assist TOSHIBA Assist is a graphical user interface that

provides easy access to help and services.

DVD Video Player The DVD player is used to play DVD Video media

through an on-screen interface and functions.
Click Start, point to All Programs, point to
InterVideo WinDVD then click InterVideo WinDVD.

TOSHIBA ConfigFree ConfigFree is a suite of utilities to allow easy

control of communication devices and network
connections. ConfigFree also allows you to find
communication problems and create profiles for
easy switching between location and
communication networks.

Satellite M100 Features

TOSHIBA Disc
Creator

TOSHIBA DVD-RAM
Utility

TOSHIBA Hardware
Setup

To start ConfigFree, click the Start Button, point
to All Programs, point to TOSHIBA, point to
Networking and click ConfigFree.

You can create discs in several formats including
audio CDs that can be played on a standard
stereo CD player and data discs to store the files
and folders on your hard disk drive. This software
can be used on a model with a CD-RW/DVD-ROM
drive or a DVD Super Multi drive.

TOSHIBA DVD-RAM Utility has the function of
Physical Format and Write-Protect to DVD-RAM.
This utility is contained the setup module of
TOSHIBA Disc Creator. You can boot TOSHIBA
DVD-RAM Utility from the menu bar as follows.
Start -> All Programs -> TOSHIBA -> CD&DVD
Applications -> DVD-RAM Utility.

This program lets you customize your hardware
settings according to the way you work with your
computer and the peripherals you use. To access
this utility, click Start, click Control Panel, click
Printers and Other Hardware and select the
TOSHIBA HW Setup icon.

CD/DVD Drive
Acoustic Silencer

1-12 Satellite M100

This utility allows you to configure the read speed
of CD drive. You can either configure Normal
Mode, which operates the drive at its maximum
speed for quick data access, or Quiet Mode,
whcih runs at single speed for CD audio and
which can lessen operational noise. It is
ineffective in DVD.

Satellite M100 Features

Ulead DVD

You can edit digital video and make a DVD-Video.

MovieFactory® for
TOSHIBA

FingerPrint utility This product has a fingerprint utility installed for

the purpose of enrolling and recognizing
fingerprints. (depending on the model
purchased.) By enrolling the ID and password to
the fingerprint authentication device, it is no
longer necessary to input the password from the
keyboard. Just by swiping the finger against the
fingerprint sensor, the following functions will be
enabled:

■ Logon to Windows and access a security-

enabled homepage through IE (Internet
Explorer).

■ Files and folders can be encrypted/decrypted

and third party access to them prevented.

■ Disable the password-protected screen-

saver when returning from power-saving
(Sleep) mode.

■ System boot authentication and Single Touch

Boot feature.

Windows Mobility
Center

■ Power on Security and Single Sign On feature.

Mobility Center is a utility for accessing several
mobile PC settings quickly in one window. A
default maximum of eight tiles are provided by the
operating system, and an additional three tiles are
added to your Mobility Center

■ Lock Computer:

This can be used to lock your computer
without turning it off. This has the same
function as the Lock button at the bottom of
the right pane in the start menu.

■ TOSHIBA Assist:

This can be used to open TOSHIBA Assist if
it is already installed in your computer.

Satellite M100 1-13

Options

Satellite M100 Features

You can add a number of options to make your computer even more
powerful and convenient to use. The following options are available:

Memory Modules Two memory module can be installed in this

computer.

Use either PC4200 or PC5400 compatible memory modules. See your
TOSHIBA dealer for details

Battery Pack An additional battery pack can be purchased from

your TOSHIBA dealer. Use it as a spare or
replacement.

High capacity battery
pack

An additional battery pack can be purchased from
your TOSHIBA dealer. Use it as a spare to
increase your computer operating time.

AC adapter If you use your computer at more than one site

frequently, it may be convenient to purchase an
additional AC adapter for each site so you will not
have to carry the adapter with you.

Battery charger The battery charger lets you charge extra

batteries outside the computer.

USB Floppy Disk
Drive

Lets you attach a floppy disk drive to your
computer by means of a USB cable.

1-14 Satellite M100

Satellite M100

The Grand Tour

This chapter identifies the various components of your computer. Become
familiar with each component before you operate the computer.

Certain types of notebook chassis are designed to accommodate all
possible configurations for an entire product series. Your selected model
may not have all the features and specifications corresponding to all of the
icons or switches shown on the notebook chassis, unless you have selected
all those features.

Chapter 2

Front with the display closed

The following figure shows the computer front with its display panel in the
closed position.

1 32 5

4

1. DC IN LED

OWER LED

2. P

ATTERY LED

3. B

4. H

ARD DISK DRIVE LED

ULTIPLE DIGITAL MEDIA

5. M
C

ARD SLOT ACCESS LED

IRELESS COMMUNICATION

6. W
SWITCH*

7 106 8

9

IRELESS COMMUNICATION

7. W
LED*

8. M

ICROPHONE JACK

9. HEADPHONE JACK

10. VOLUME CONTROL

* The availability of this feature is dependant on the model you purchased.

Satellite M100User’s Manual 2-1

Front of the computer with display closed

The Grand Tour

DC IN LED The DC IN LED indicates the computer is

connected to the AC adapter and it is plugged into
an AC power source.

Power LED In normal operating mode, the Power LED is blue.

If the system is in Sleep Mode the LED will flash
amber, while the LED will be off when the
computer is turned off or is in Hibernation Mode.

Battery LED The Battery LED indicates the battery's current

charge/discharge status. It lights blue when the
battery is fully charged. It lights amber while the
battery is being charged from the AC adapter. It
flashes amber when the battery capacity is low.

Hard Disk Drive LED The Hard Disk Drive LED indicates that the hard

disk drive is being accessed. Every time your
computer runs a program, opens a file, or
performs some other function in which it must
access the hard disk drive, this light will go on.

Multiple Digital
Media Card Slot

The Multiple Digital Media Card Slot Access LED
illuminates when the card reader is in use.

Access LED

Wireless
Communication
Switch*

The wireless communication switch turns on the
wireless networking transceiver. The Wireless
Communication LED beside it indicates that
wireless networking is turned on.

Wireless
Communication

Indicates whether the wireless LAN is active or
not.

LED*

Microphone Jack The standard 3.5 mm mini microphone jack

enables connection of a three conductive type
mini-jack for a monaural microphone.

Headphone Jack The headphone jack lets you connect stereo

headphones or other audio-output devices such
as external speakers. Connecting headphones or
other devices to this jack automatically disables
the internal speakers.

Volume Control Use this dial to adjust the volume of the stereo

speakers or headphones.

2-2 Satellite M100

Right side

The following figure shows the computer's right side.

The Grand Tour

2 31 4

1. UNIVERSAL SERIAL BUS
(USB) PORTS

2. OPTICAL DISC DRIVE

Universal Serial Bus
(USB) Ports

The right side of the computer

The Universal Serial Bus (USB 2.0 and 1.1
compatible) ports enable USB-equipped devices

3. OPTICAL DISC DRIVE LED

ECURITY LOCK

4. S

such as keyboards, mice, hard drives, scanners,
and printers to be connected to the computer.

Optical Disc Drive The computer is configured with a full-size optical

disc drive module that lets you run either 12 cm
(4.72") or 8 cm (3.15") discs without using an
adapter. See the Drives section in this chapter for
technical specifications on each drive and
Chapter 4, Operating Basics, for information on
using the drive and caring for discs.

Optical Disc Drive
LED

This indicator lets you know when the Optical Disc
Drive is being accessed.

Security Lock An optional security cable attaches to this port in

order to anchor your computer to a desk or other
large object to deter theft.

Satellite M100 2-3

Left side

The Grand Tour

The following figure shows the computer's left side.

1 2 3 54 6 7

1. RGB (MONITOR) PORT

2. FAN VENTS

3. UNIVERSAL SERIAL BUS
(USB) P

4. TV OUT PORT

ORT

The left side of the computer

5. I.LINK (IEEE 1394) PORT

6. MULTIPLE DIGITAL MEDIA
CARD SLOT

7. PC CARD SLOT

* The availability of this feature is dependant on the model you purchased.

RGB (Monitor) Port This 15-pin port lets you connect an external

video display to the computer.

Fan Vents The fan vents help prevent the CPU from

overheating.

To prevent possible over heating of the CPU, never block the fan vent.

Universal Serial Bus
(USB) Port

The Universal Serial Bus (USB 2.0 and 1.1
compatible) port enables USB-equipped devices
such as keyboards, mice, hard drives, scanners,
and printers to be connected to the computer.

TV Out Port Connect a 4-pin S- video cable into this connector

i.LINK (IEEE 1394)
Port

Multiple Digital
Media Card Slot

PC Card Slot The PC Card slot can accommodate one 5 mm

2-4 Satellite M100

in order to output either an NTSC or PAL television
signal.

This port allows you to connect an external
device, such as a digital video camera, for high­speed data transfer.

The Multiple Digital Media Card Slot allows you
use media cards from digital still cameras and
other various forms of portable information
equipment.

PC Card (Type II). You can install any industry
standard PC Card such as a SCSI adapter,
Ethernet adapter or flash memory card.

Back side

The following figure shows the computer back panel.

The Grand Tour

1 42 3

1. MODEM JACK*

2. DC-IN 15V J

3. LAN JACK

ACK

The back side of the computer

4. UNIVERSAL SERIAL BUS
(USB) P

ORTS

* The availability of this feature is depending on the model you purchased.

Modem Jack In regions where an internal modem is installed as

standard equipment, this jack lets you use a
modular cable to connect the modem directly to
a telephone line.

DC-IN 15V Jack The DC IN jack is where you plug in the AC

adapter.

LAN Jack This jack lets you connect to a LAN. The adapter

has built-in support for Ethernet LAN (10
megabits per second, 10BASE-T), Fast Ethernet
LAN (100 megabits per second, 100BASE-TX)
and Gigabit Ethernet LAN (1000 megabits per
second, 1000BASE-T). Two indicators built into
the jack let you see the LAN status.

Universal Serial Bus
(USB) Ports

Satellite M100 2-5

The Universal Serial Bus (USB 2.0 and 1.1
compatible) port enables USB-equipped devices
such as keyboards, mice, hard drives, scanners,
and printers to be connected to the computer.

Underside

The following figure shows the underside of the computer. Make sure the
display is closed before turning over your computer.

The Grand Tour

1

2

3

1. BATTERY PACK

2. BATTERY PACK LOCK

3. EXPANSION MEMORY SOCKET

The bottom of the computer

4. BATTERY PACK LATCH

5. FAN VENT

4

5

Battery Pack The battery pack powers the computer when the

AC adapter is not connected. For detailed
information on the battery pack, refer to Chapter
6, Power and Power-Up Modes.

Battery Pack Lock When you slide this into its locked position, the

battery pack cannot be released even if you
attempt to slide the battery pack latch into its
open position.

Expansion Memory
Socket

Use this socket to install a memory module to
increase your computer's memory. Refer to the

Memory expansion section in Chapter 8, Optional
Devices.

Battery Pack Latch With the Battery Pack Lock in its unlocked

position, you can slide this latch in order to
remove the battery pack.

Fan Vent The fan vent helps prevent the CPU from

overheating.

To prevent possible overheating of the CPU, never block the fan vent.

2-6 Satellite M100

Front with the display open

The following figure shows the front of the computer with the display open.
To open the display, push the latch on the front of the display and lift it up.
Position the display at a comfortable viewing angle.

The Grand Tour

1

2

3

4

5

6

7

1. DISPLAY SCREEN

2. CD/DVD BUTTON

3. INTERNET BUTTON

4. POWER BUTTON

5. LEFT AND RIGHT SPEAKERS

6. TOUCHPAD

7. TOUCHPAD CONTROL
BUTTONS

8. PLAY/PAUSE BUTTON

9. STOP/EJECT BUTTON

10. PREVIOUS BUTTON

11. NEXT BUTTON

12. FINGERPRINT SENSOR*

13. E

XPANSION MEMORY SOCKET

8

9

10

11

5

13

12

* The availability of this feature is dependent on the model you purchased.

Display Screen The LCD displays high-contrast text and graphics

To prolong the life of your display screen, use a screen saver when you're
not using the computer and it is idle.

Satellite M100 2-7

The front with the display open

at a resolution up to 1280 x 800 pixels. Refer to
Appendix B - Display Modes for further
information. When the computer operates from
the AC adapter, the display screen's image will be
somewhat brighter than when it operates on
battery power - this is normal and is designed to
conserve battery power.

The Grand Tour

CD/DVD Button

If you press this button while the computer is on
or stand-by, Windows Media Player or WinDVD is
launched.

Internet Button Press the Internet button to open your default web

brower.
The button setting can be changed in TOSHIBA

Controls properties.

Power Button Press the power button to turn the computer's

power on and off. There is an LED inside the
power button which shines blue when the system
is on.

Left and Right
Speakers

The computer provides two speakers for stereo
sound reproduction.

TouchPad The TouchPad pointing device is located in the

center of the palm rest and is used to control the
on-screen pointer. Refer to the Using the
TouchPad section in Chapter 4, Operating Basics.

TouchPad Control
Buttons

Control buttons below the TouchPad let you
select menu items or manipulate text and
graphics designated by the on-screen pointer.

Play/Pause Button Press this button to begin playing an audio CD, a

DVD movie or digital audio files. This button also
acts as a Pause button.

(The availability of this function depends on the
model you purchased.)

Stop/Eject Button Stops playing the CD, DVD or digital audio. Also

ejects a disc from the tray.
(The availability of this function depends on the

model you purchased.)

Previous Button Skips backwards to the previous track, chapter or

digital file. Refer to Chapter 4, Operating Basics,
for details.

(The availability of this function depends on the
model you purchased.)

If Random or Shuffle is selected in Windows Media Player, selecting Next
or Previous advances to a random selection.

2-8 Satellite M100

The Grand Tour

Next Button Skips forward to the next track, chapter or digital

file. Refer to Chapter 4, Operating Basics, for
details.

(The availability of this function depends on the
model you purchased.)

Fingerprint Sensor Just by swiping the finger against the fingerprint

sensor, the following functions will be enabled:

■ Logon to Windows and access a

securityenabled homepage through IE
(Internet Explorer).

■ Files and folders can be encrypted/decrypted

and third party access to them prevented.

■ Disable the password-protected screen-

saver when returning from power-saving
(Sleep) mode.

■ System boot authentication and Single Touch

Boot feature.

Expansion Memory
Socket

■ Authentication of the User Password and

Hard Disk Drive Password when booting up
the computer.

Refer to the Using the Fingerprint Sensor section
in Chapter 4, Operating Basics.

Use this socket to install a memory module to
increase your computer’s memory. Refer to the

Memory expansion in Chapter 8, Optional
Devices.

Satellite M100 2-9

Keyboard Indicators

Arrow Mode When the Arrow mode icon lights blue, you can

Numeric Mode You can use the keypad overlay (light gray labeled

The Grand Tour

use the keypad overlay (light gray labeled keys)
as cursor keys. Refer to the Keypad overlay
section in Chapter 5, The Keyboard.

keys) for numeric input when the Numeric mode
icon lights blue. Refer to the Keypad overlay
section in Chapter 5, The Keyboard.

Caps Lock The Caps Lock LED lights when you press the

Optical Disc drive

The computer will either have a CD-RW/DVD-ROM drive, DVD-ROM drive
or double layer DVD Super Multi drive depending on its configuration. An
ATAPI interface controller is used for the operation of these optical drives.
When the computer is accessing a disc, an indicator on the drive glows.

Region codes for DVD drives and media

The disc drive and its media are manufactured according to the
specifications of six marketing regions. When you purchase DVD-Video,
make sure it matches your drive, otherwise it will not play properly.

Code Region

1 Canada, United States

Caps Lock key. When this light is on, pressing a
letter key on the keyboard produces an
uppercase (capital) letter.

2 Japan, Europe, South Africa, Middle East

3 Southeast Asia, East Asia

4 Australia, New Zealand, Pacific Islands, Central

5 Russia, Indian Subcontinent, Africa, North Korea,

6 China

2-10 Satellite M100

America, South America, Caribbean

Mongolia

Writable discs

This section describes the types of writable discs. Check the specifications
for your drive to for the type of discs it can write. Use Record Now! to write

compact discs. Refer to Chapter 4, Operating Basics.

CDs

■ CD-R discs can be written only once. The recorded data cannot be

erased or changed.

■ CD-RW discs can be recorded more than once. Use either 1x, 2x, or 4x

multi-speed CD-RW discs or high-speed 4x to 10x discs. The write
speed of ultra-speed CD-RW discs is a maximum of 24x speed.

DVDs

■ DVD-R and DVD+R discs can be written only once. The recorded data

cannot be erased or changed.

■ DVD-RW, DVD+RW and DVD-RAM discs can be recorded more than

once.

The Grand Tour

CD-RW/DVD-ROM drive

The full-size CD-RW/DVD-ROM drive module lets you record data to
rewritable CDs as well as run either 12 cm (4.72") or 8 cm (3.15") discs
without using an adapter.

The read speed is slower at the center of a disc and faster at the other edge.

DVD read 8 speed (maximum)
CD read 24 speed (maximum)
CD-R write 24 speed (maximum)
CD-RW write 24 speed (maximum, ultra-speed media)

DVD-ROM drive

The full-size CD-RW/DVD-ROM drive module lets you record data to
rewritable CDs as well as run either 12 cm (4.72") or 8 cm (3.15") discs
without using an adapter.

The read speed is slower at the center of a disc and faster at the other edge.

DVD read 8 speed (maximum)
CD read 24 speed (maximum)

Satellite M100 2-11

The Grand Tour

DVD Super Multi drive with double layer disc recording
support

The full-size DVD super multi drive module lets you record data to rewritable
discs as well as run either 12cm (4.72") or 8cm (3.15") discs without using
an adapter.

The read speed is slower at the center of a disc and faster at the other edge.

DVD read 8 speed (maximum)
DVD-R write 8 speed (maximum)
DVD-RW write 4 speed (maximum)
DVD+R write 8 speed (maximum)
DVD+RW write 4 speed (maximum)
DVD-RAM write 5 speed (maximum)
CD read 24 speed (maximum)
CD-R write 24 speed (maximum)
CD-RW write 10 speed (maximum, ultra-speed media)
DVD+R (DL) write 2.4 speed (maximum)
DVD-R (DL) write 2 speed (maximum)

This drive cannot use discs that allow writing faster than 8x speed or faster
(DVD-R and DVD+R with Single Layer), 4x speed or faster (DVD-RW and
DVD+RW), 5x speed (DVD-RAM) and Ultra-speed+ (CD-RW).

2-12 Satellite M100

AC adapter

The AC adapter converts AC power to DC power and reduces the voltage
supplied to the computer. It can automatically adjust to any voltage from
100 to 240 volts and to a frequency of either 50 or 60 hertz, enabling you to
use the computer in almost any country/region.

To recharge the battery, simply connect the AC adapter to a power source
and the computer. See Chapter 6, Power and Power-Up Modes, for details.

The Grand Tour

The AC adapter

Use of the wrong adapter could damage your computer. TOSHIBA assumes
no liability for any damage in such case. The output rating for the computer
is 15 volts DC.

Please use only the AC Adapter supplied with the computer or an AC
adapter certified by TOSHIBA.

Satellite M100 2-13

The Grand Tour

2-14 Satellite M100

Satellite M100

Getting Started

This chapter provides basic information to get you started using your
computer. It covers the following topics:

■ Setting up your work space - for your health and safety

Be sure also to read Instruction Manual for Safety & Comfort. This guide,
which is included with the computer, explains product liability.

■ Connecting the AC adapter

Chapter 3

■ Opening the display

■ Turning on the power

■ Starting up for the first time

■ Turning off the power

■ Restarting the computer

■ Restoring the pre-installed software from the Product Recovery media.

All users should be sure to carefully read the section Starting up for the first
time, which describes the actions to take when you first turn on the power
to the computer.

Setting up your work space

Establishing a comfortable work site is important for you and your computer.
A poor work environment or stressful work habits can result in discomfort
or serious injury from repetitive strain to your hands, wrists or other joints.
Proper ambient conditions should also be maintained for the computer's
operation. This section discusses the following topics:

■ General conditions

■ Placement of the computer and peripheral devices

■ Seating and posture

■ Lighting

■ Work habits

User’s Manual 3-1

General conditions

In general, if you are comfortable, so is your computer, but read the following
to make sure your work site provides a proper environment.

■ Make sure there is adequate space around the computer for proper

ventilation.

■ Make sure the AC power cord connects to an outlet that is close to the

computer and easily accessible.

■ The temperature should be 5 to 35 degrees Centigrade (41 to 95 degrees

Fahrenheit) and the relative humidity should be 20 to 80 percent.

■ Avoid areas where rapid or extreme changes in temperature or humidity

may occur.

■ Keep the computer free of dust, moisture, and exposure to direct

sunlight.

■ Keep the computer away from heat sources, such as electric heaters.

■ Do not use the computer near liquids or corrosive chemicals.

■ Some components in the computer, including data storage media, can

be damaged by magnets. Do not place the computer near magnetic
objects or bring magnetic objects close to the computer. Be careful of
objects, such as stereo speakers, that produce strong magnetic fields
during operation. Also, be careful with metal objects, such as bracelets,
which can be inadvertently magnetized.

Getting Started

■ Do not operate the computer in close proximity to a mobile phone.

■ Leave ample ventilation room for the fan. Ensure that there are no

obstructions around any of the system inlets or exhaust vents.

Placement of computer

Position the computer and peripheral devices to provide comfort and safety.

■ Set the computer on a flat surface at a comfortable height and distance.

The display should be no higher than eye level to avoid eye strain.

■ Place the computer so that it is directly in front of you when you work

and make sure you have adequate space to easily operate other devices.

■ Allow adequate space behind the computer to let you freely adjust the

display. The display should be angled to reduce glare and maximize
visibility.

■ If you use a paper holder, set it at about the same height and distance

as the computer.

3-2 Satellite M100

Seating and posture

The height of your chair in relation to the computer and keyboard as well as
the support it gives your body are primary factors in reducing work strain.

Getting Started

■ Place your chair so that the keyboard is at or slightly below the level of

■ Your knees should be slightly higher than your hips. If necessary, use a

■ Adjust the back of your chair so it supports the lower curve of your spine.

■ Sit straight so that your knees, hips and elbows form approximately 90

Lighting

Proper lighting can improve legibility of the display and reduce eye strain.

■ Position the computer so that sunlight or bright indoor lighting does not

■ Avoid placing the computer in front of bright light that could shine directly

■ If possible, use soft, indirect lighting in your computer work area. Use a

Posture and positioning of the computer

your elbow. You should be able to type comfortably with your shoulders
relaxed.

foot rest to raise the level of your knees to ease pressure on the back of
your thighs.

degree angles when you work. Do not slump forward or lean back too far.

reflect off the screen. Use tinted windows, shades or other screens to
eliminate sun glare.

in your eyes.

lamp to illuminate your documents or desk, but be sure to position the
lamp so that it does not reflect off the display or shine in your eyes.

Satellite M100 3-3

Work habits

A key to avoiding discomfort or injury from repetitive strain is to vary your
activities.

If possible, schedule a variety of tasks into your work day. If you must spend
long periods at the computer, finding ways to break up the routine can
reduce stress and improve your efficiency.

■ Sit in a relaxed posture. Good positioning of your chair and equipment

as described earlier can reduce tension in your shoulders or neck and
ease back strain.

■ Vary your posture frequently.

■ Occasionally stand up and stretch or exercise briefly.

■ Exercise and stretch your wrists and hands a number of times during

the day.

■ Frequently, look away from the computer and focus your eyes on a

distant object for several seconds, for example 30 seconds every 15
minutes.

■ Take frequent short breaks instead of one or two long breaks, for

example, two or three minutes every half hour.

Getting Started

■ Have your eyes examined regularly and visit a doctor promptly, if you

suspect you might be suffering from a repetitive strain injury.

■ Please check every couple of months to ensure the fan inlets or exhaust

vents (see sections 2-4 and 2-6) are unobstructed. Clean them if
necessary.

A number of books are available on ergonomics and repetitive strain injury
or repetitive stress syndrome. For more information on these topics or for
pointers on exercises for such stress points as hands and wrists, please
check with your library or book vendor. Also refer to the computer's Safety
Instruction Manual.

3-4 Satellite M100

Connecting the AC adapter

Attach the AC adapter when you need to charge the battery or you want to
operate from AC power. It is also the fastest way to get started, because
the battery pack will need to be charged before you can operate from battery
power. The AC adapter can be connected to any power source supplying
from 100 to 240 volts and 50 or 60 hertz. For details on using the AC adapter
to charge the battery pack, refer to Chapter 6, Power and Power-Up Modes.

Use of the wrong adapter could damage your computer. TOSHIBA assumes
no liability for any damage in such case. The output rating for the computer
is 15 volts DC.

1. Connect the power cord to the AC adapter.

Getting Started

Connecting the power cord to the AC adapter

2. Connect the DC output plug on the AC adapter to the DC IN input port
on the back of the computer.

Connecting the adapter to the computer

3. Plug the power cord into a live wall outlet. The Battery and DC IN
indicators on the front of the computer should glow.

Satellite M100 3-5

Opening the display

The display panel can be rotated in a wide range of angles for optimal
viewing.

1. Push the display latch on the front of the computer.

2. Lift the panel up and adjust it to the best viewing angle for you.

Use reasonable care when opening and closing the display panel. Opening
it vigorously or slamming it shut could damage the computer.

Getting Started

Opening the display

Turning on the power

This section describes how to turn on the power.

After you turn on the power for the first time, do not turn it off until you have
set up the operating system. Refer to the section Starting up for the first
time in this chapter.

1. If a USB floppy disk drive is connected, make sure the drive is empty - if a
disk is in the drive, press the eject button to remove it.

2. Open the display panel.

3. Press the computer's power button and then release it.

3-6 Satellite M100

Turning on the power

Starting up for the first time

When you first turn on the power, the computer's initial screen is the
Windows Vista™ Startup Screen Logo. Follow the on-screen directions for
each screen. During setup, you can click the Back button to return to the
previous screen.

Be sure to read the Windows Operating System End User License
Agreement carefully.

Turning off the power

The power can be turned off in one of three modes, either Shutdown (Boot)
Mode, Hibernation Mode or Sleep Mode.

Shut Down mode (Boot mode)

When you turn off the power in Shut Down mode no data will be saved and
the computer will boot to the operating system's main screen the next time
it is turned on.

Getting Started

1. If you have entered data, either save it to the hard disk, drive or to other
storege media.

2. Make sure all disk/disks activity has stopped before removing the CD/
DVD or floppy diskette.

■ Make sure the Hard Disk Drive indicators is off. If you turn off the power

while a disk (disks) is being accessed, you can lose data or damage the
disk.

■ Never turn off the power while an application is running. Doing so could

cause loss data.

■ Never turn off the power, disconnect an external storage device or

remove storage media during data read/write. Doing so can cause data
loss.

3. Click Start then click the arrow button ( ) located in the power
management buttons ( ) and select Shut Down from
the menu.

4. Turn off any peripheral devices connected to your computer.

Do not turn the computer or peripheral devices back on immediately - wait
a short period to avoid and peripheral damage.

Satellite M100 3-7

Sleep Mode

If you do have to interrupt your work, you are able to turn off the power
without exiting from your software by placing the computer into Sleep Mode.
In this mode data is maintained in the computer’s main memory so that,
when you turn on the power again, you can continue working right where
you left off

■ When the AC adaptor is connected, the computer will go into Sleep

Mode according to the settings in the Power Options.

■ To restore the operation from the computer from Sleep Mode, press the

power button or press any key. Please be aware that this latter action
only works on the internal keyboard if the. Wake-up on Keyboard option
is enabled within the HW Setup utility.

■ If the computer enters Sleep Mode while a network application is active,

the application might not be restored when the computer is next turned
on and the system returns from Sleep Mode.

■ To prevent the computer from automatically entering Sleep Mode,

disable Sleep Mode within the Power Options. However, please be
aware that this configuration will nullify the computer’s Energy Star
compliance.

Getting Started

■ Before entering Sleep Mode, be sure to save your data.

■ Do not install or remove a memory module while the computer is in Sleep

Mode. The Computer or the module could be damaged.

■ Do not remove the battery pack while the computer is in Sleep Mode

(unless the computer is connected to an AC power source). Data in
memory will be lost.

Benefits of Sleep Mode

The Sleep Mode feature provides the following benefits:

■ Restore the previous working enviroment more rapidly than does the

Hibernation Mode feature.

■ Saves power by shutting down the system when the computer receives

no input or hardware access for the time period set by the System Sleep
Mode feature.

■ Allows the use of the panel power off feature.

3-8 Satellite M100

Getting Started

Executing Sleep Mode

You can enter also Sleep Mode by pressing Fn + F3 - please refer to Chapter
5, The Keyboard, for further details.

Youu can enter Sleep Mode in one of three ways:

1. Click Start then click the arrow button ( ) located in the power
management buttons ( ), or click the arrow button
( ) and select Sleep from the menu.

2. Close the computer’s LCD display panel. Please note that this feature
must be enabled - please refer to the Power Options (to access it, click
Start followed by Control Panel followed by System and Maintenance
and then click the Power Options).

3. Press the power button. Please note that this feature must be
enabled - please refer to the Power Options (to access it, click Start
followed by Control Panel followed by System and Maintenance and
then click the Power Options).

When you turn the power back on, you can continue where you left when
you shutdown the computer.

■ When the computer is in Sleep Mode, the power indicator will blink

orange.

■ If you are operating the computer on battery power, you can lengthen

the overall operating time by turning it off into Hibernation Mode - Sleep
Mode will consume more power while the computer is off.

Sleep Mode limitations

Sleep Mode will not function under the following conditions:

■ Power is turned back on immediately after shutting down.

■ Memory circuits are exposed to static electricity or electrical noise.

Hibernation mode

The Hibernation Mode feature saves the contents of memory to the hard
disk drive when the computer is turned off so that, the next time it is turned
on, the previous state is restored. Please note that the Hibernation Mode
feature does not save the status of any peripheral devices connected to the
computer.

■ Save your data. While entering Hibernation Mode, the computer saves

the contents of memory to the hard disk drive. However, for safety sake,
it is best to save your data manually.

■ Data will be lost if you remove the battery or disconnect the AC adaptor

before the save is completed. Wait for the Hard Disk Drive indicator to
go out.

■ Do not install or remove a memory module while the computer is in

Hibernation Mode. Data will be lost.

Satellite M100 3-9

Getting Started

Benefits of Hibernation Mode

The Hibernation Mode feature provides the following benefits:

■ Saves Data to the hard disk drive when the computer automatically

shutsdown because of a low battery condition.

■ You can return to your previous working environment immediately when

you turn on the computer.

■ Saves power by shutting down the system when the computer receives

no input or hardware access for the time period set by the System
Hibernate feature.

■ Allows the use of the panel power off feature.

Starting Hibernation Mode

You can also enable Hibernation Mode by pressing Fn + F4 - please refer
to Chapter 5, The Keyboard, for further details.

To enter Hibernation Mode, follow the steps below.

1. Click Start.

2. Click the arrow button ( ) in the power management buttons
( ).

3. Select Hibernate from the menu.

Automatic Hibernation Mode

The computer can be configured to enter Hibernate Mode automatically
when you press the power button or close the lid. In order to define these
settings, you can follow the steps as described below:

1. Click Start and click the Control Panel.

2. Click System and Maintenance and click Power Options.

3. Click Choose what the Power Button do or Choose what closing the
lid does.

4. Enable the desired Hibernation Mode settings for When I press the
power button and When I close the lid.

5. Click the Save Changes button.

Data save in Hibernation Mode

When you turn off the power in Hibernation Mode, the computer takes a
moment to save the current data in memory to the hard disk drive. During
this time, the Hard Disk Drive indicator will glow.

After you turn off the computer, and the content of memory has been saved
to the hard disk drive, turn off the power to any peripheral devices.

Do not turn the computer or devices back on immediately. Wait a moment
to let all capacitors fully discharge.

3-10 Satellite M100

Restarting the computer

Certain conditions require that you reset the computer, for example if:

■ You change certain computer settings.

■ An errors and the computer does not respond you your keyboard

commands.

If you need to restart the computer, there are three ways this can be
achieved:

1. Click Start then click the arrow button ( ) in the power management
buttons ( ) and select Restart from the menu.

2. Press Ctrl+Alt+Del to display the menu window, then select Restart from
the Shutdown options.

3. Press the power button and hold it down for five seconds. Once the
computer has turned itself off, wait between ten and fifteen seconds
before turning the power on again by pressing the power button.

System Recovery Options

Getting Started

About 1.5GB hidden partition is allocated on the hard disk drive for the
System Recovery Options.This partition stores files which can be used to
repair the system in the event of a problem.

The System Recovery Options feature will be unusable if this partition is
deleted.

System Recovery Options

The System Recovery Options feature is installed on the hard disk when
shipped from the factory. In the event that an error occurs between the time
power is turned ON and login, and the error is repairable, the Windows
Recovery Enviroment will automatically repair the error.

The Window Recovery Environment can also be run manually to repair
errors.

The procedure is as follows. Follow the instructions shown on the on-screen
menu.

1. Turn off the computer.

2. While holding the F8 key, turn the computer again.

3. The Advanced Boot Options menu will be displayed.
Use the arrow keys to select Repair Your Computer and press Enter.

4. Follow the on-screen instructions.

The Windows Vista™ Complete PC Backup feature can be used on
Windows Vista™ Business Edition and Ultimate Edition.

Satellite M100 3-11

Getting Started

Restoring the preinstalled software from the Product
Recovery disc

If preinstalled files are damaged, use the Product Recovery disc to restore
them. To restore the operating system and all preinstalled software, follow
the steps below.

When you reinstall the Windows operating system, the hard disk will be
reformatted and all data will be lost. You can not use System Recovery
Options if restoring the pre-installed software without System Recovery
options.

1. Load the Product Recovery disc in the drive and turn off the computer's
power.

2. Switch on the computer and, when the In Touch with Tomorrow
TOSHIBA prompt appears, press the F12 key to display the Boot Menu.

3. Use the up or down cursor key to select the CD-ROM/DVD drive in the
display menu.

4. Follow the on-screen instructions.

When removing pre-installed drivers / utilities or when installing, you can
setup the respective drivers / utilities from the following folder.

C: \TOSAPINS\***

When Installing TOSHIBA SD Memory Card Format or other SD utilities,
select TOSHIBA SD Memory Utilities from C:\TOSAPINS\.

3-12 Satellite M100

Satellite M100

Operating Basics

This chapter gives information on basic operations including using the
TouchPad, optical disc drives, the internal modem, LAN and wireless LAN.
It also provides tips on caring for your computer and on heat dispersal.

Using the TouchPad

To use the TouchPad, simply move your finger tip across it in the direction
you want the on-screen pointer to go.

Chapter 4

1. TOUCHPAD CONTROL BUTTONS 2. TOUCHPAD

The two buttons below the TouchPad are used like the buttons on a standard
mouse.

User’s Manual 4-1

2

1

TouchPad and control buttons

Operating Basics

Press the left button to sele ct a menu item or to manipulate text or gra phics
designated by the pointer. Press the right button to display a menu or other
function depending on the software you are using.

Do not press on the TouchPad too hard or press a sharp object such as a
ball point pen against it. The TouchPad could be damaged.

The TouchPad has similar functions to a two-button mouse with a scroll
wheel. For some functions, you can tap it instead of pressing a button.

You can customize pointing device actions in Mouse Properties. Open the
Control Panel, select the Mouse icon and press Enter to open the Mouse
Properties window.

Click Click the left control button or tap the TouchPad once.
Double-click Click the left control button twice or tap the TouchPad

twice.

Scroll Vertical: Move your finger up or down the right edge of

the TouchPad.
Horizontal: Move your finger left or right along the bottom

edge of the TouchPad.

Using the FingerPrint

This product has a FingerPrint utility installed for the purpose of enrolling
and recognizing FingerPrints. By enrolling the ID and password to the
FingerPrint authentication device, it is no longer necessary to input the
password from the keyboard. Just by swiping the finger against the
FingerPrint sensor, the following functions will be enabled:

■ Logon to Windows and access a security-enabled homepage through

IE (Internet Explorer).

■ Files and folders can be encrypted/decrypted and third party access to

them prevented.

■ Disable the password-protected screen-saver when returning from

power-saving mode such as Sleep Mode.

■ Power-on Security and Single Sign-On feature.

To "swipe" refers to the action of reading a FingerPrint using the FingerPrint
sensor.

4-2 Satellite M100

How the Swipe the Finger

Using the following steps when swiping fingers for FingerPrint registration
or authentication will help to minimize authentication failures:

1. Align the first joint of the finger to the center of the sensor. Lightly touch
the sensor and swipe finger levelly towards you.

While lightly touching the sensor, swipe the finger towards you until the
sensor surface becomes visible.

Ensure the center of the FingerPrint is on the sensor when swiping the
finger.

■ Avoid swiping with the finger stiff or pressed-on too hard

FingerPrint reading may fail if the center of the FingerPrint is not touching
on the sensor, or when finger is swiped while pressing hard.
Make sure that the center of the FingerPrint is touching the sensor
before swiping.

■ Confirm the center of the FingerPrint whirl before swiping

The thumb's FingerPrint has a bigger whirl, which is prone to
misalignment and distortions. This will cause difficulty in registration and
a drop in the authentication success rate. Always confirm the center of
the FingerPrint whirl so that it is swiped along the centerline of the
sensor.

Operating Basics

■ When FingerPrint reading is not successful

There is a possibility of authentication failures if the finger is swiped too
quickly or too slowly. Follow the onscreen instructions to adjust the
speed of the swipe.

The following illustrations show the correct way to slide your finger over the
recognition sensor.

Align the finger and sensor like the drawings.

Satellite M100 4-3

Points to note about the FingerPrint Sensor

Please be aware of the following considerations when using the FingerPrint
sensor. A failure to follow these guidelines might result in damage to the
sensor, sensor failure, FingerPrint recognition problems or a lower
FingerPrint recognition success rate.

■ Do not scratch or poke the sensor with your nails or any hard or sharp

objects.

■ Do not press the sensor strongly.

■ Do not touch the sensor with a wet finger or any wet objects - keep

sensor surface dry and free of water vapor.

■ Do not touch the sensor with a soiled or dirty finger as minute foreign

particles of dust and dirt may scratch it.

■ Do not paste stickers or write on the sensor.

■ Do not touch the sensor with a finger or any other object which may have

a built-up of up static electricity on it.

Observe the following before you place your finger on the sensor whether
for FingerPrint enrollment/registration or recognition.

Operating Basics

■ Wash and dry your hands thoroughly.

■ Remove static electricity from your fingers by touching any metal

surface. Static electricity is a common cause of sensor failures,
especially when the weather is dry.

■ Clean the sensor with a lint-free cloth - do not use detergent to any other

chemicals to clean the sensor.

■ Avoid the following finger conditions for enrollment or recognition as

they may result in FingerPrint enrollment errors or a drop in the
FingerPrint recognition success rate.

■ Soaked or swollen finger (e.g. after taking bath)

■ Injured finger

■ Wet finger

■ Soiled or oily finger

■ Extremely dry skin condition on finger

4-4 Satellite M100

Operating Basics

Observe the following to improve the FingerPrint recognition success rate.

■ Enroll two or more fingers.

■ Enroll additional fingers if recognition failure occurs when using already

enrolled fingers.

■ Check the condition of your finger - any conditions which have changed

since enrollment, such as injured, rough, extremely dry, wet, soiled, dirty,
oily, soaked, swollen fingers, may lower the recognition success rate.
Also if the FingerPrint is worn down or the finger becomes thinner or
fatter, the recognition success rate may be lowered.

■ As the FingerPrint for each finger is different and unique. you should

ensure that only the registered or enrolled FingerPrint or FingerPrints are
used for identification.

■ Check the position and speed at which you swipe your finger across the

sensor - please refer to the preceding drawing.

How to Delete the FingerPrint Data
Saved FingerPrint Data is stored in special non-volatile memory inside the

FingerPrint sensor. Therefore, if you give the computer to someone else, or
dispose of it in any way, the following process is recommended to delete
your FingerPrint information:

1. Click Start followed by All Programs, followed by Protector Suite QL
and then click Control Center.

2. The Protector Suite QL screen is displayed.

3. Click FingerPrint and click Delete.

4. Click Settings and click FingerPrint Storage Inspector.

5. The FingerPrint Storage Inspector screen will be displayed. If
FingerPrint data is displayed as part of the list, simply select all of this
information and then Remove.

6. Check whether all of the FingerPrint data was deleted on the FingerPrint
Storage Inspector screen.

In use, please be aware of the following limitations of the FingerPrint sensor:

■ The FingerPrint sensor compares and analyzes the unique

characteristics in a FingerPrint.

■ A warning message will be displayed when recognition is abnormal or

recognition is not successful within a fixed duration.

■ The recognition success rate may differ from user to user.

■ Toshiba does not guarantee that this FingerPrint recognition technology

will be error-free.

■ Toshiba does not guarantee that the FingerPrint sensor will recognize

the enrolled user or accurately screen out unauthorized users at all times.
Toshiba is not liable for any failure or damage that might arise out of the
use of this FingerPrint recognition software or utility.

Satellite M100 4-5

Operating Basics

Points to note about the FingerPrint Utility software

You are able to backup saved FingerPrint data and information within the
PasswordBank by using the import or Export User Data facility under the
FingerPrint management software. However, please be aware that any
encrypted files cannot be backup within FileSafe using this function - in
these instances it is recommended that you backup these files to external
media using standard file copy processes.

The user should back up the user profile information when using the
functions provided in this software to encrypt files or folders. If this software
or the user information is deleted without backing up the user profile
information, the encrypted files will no longer be accessible. In addition, if
the backup data is not used, the user will not be identified as the same user
even if the same name is used again in user enrolment.

Please refer to the following procedures to back up.
If Windows Vista™’s file encryption function EFS (Encryption File System)

is used to encrypt a file, the file cannot be further encrypted using the
encryption function of this software. In the help file, it is stated that this
software's Password Bank function can be used for the Internet and general
applications. However, the Internet Password Bank function in the
FingerPrint utility provided in this computer can only be used with IE (Internet
Explorer).

Set up Procedure

Please use the following procedure when first using FingerPrint
authentication.

FingerPrint Registration

You should initially enroll the required authentication data using the ‘User
Enrollment’ Wizard.

■ In use, the FingerPrint authentication system will use the same username

and password as defined within Windows operating system. If no
Windows password has been configured, you must do this before
starting the FingerPrint registration process.

■ Up to twenty-one FingerPrint patterns can be registered on this sensor.

1. Click Start followed by All Programs followed by Protector Suite QL
and then click User Enrollment.

You are also able to start the User Enrollment Wizard by using the following
method.

■ Click the Protector Suite QL icon in the Task Bar.

■ Swipe your finger across the FingerPrint Sensor.

2. Click Next.

4-6 Satellite M100

Operating Basics

3. At the User’s Password screen which is then displayed, you should
ensure that the same Windows username is displayed before entering
the appropriate password into the Enter you password field. Once this
has been done, click Next.

4. At the Hints for FingerPrint Enrollment screen, confirm the message
displayed and ensure that there is a check mark in the Run Interactive
Tutorial box. Once this has been done, click Next.

5. At the Correct swipe Procedure screen, confirm the message that is
diplayed and then click Next.

6. At the Scanning Practice screen, you are able to practice swiping your
finger to ensure you use the correct method. Once you have finished
practicing, click Next.

7. At the User’s Fingers screen, select the finger you wish to enroll from
the illustration and then click Next. On this screen please be aware that
any previously enrolled FingerPrints would have green check marks,
while the FingerPrint you are about to enroll will have a red check mark.
If any of the previously enrolled FingerPrints is selected again, the latest
information will be enrolled and any previous information over-written.

8. At Advanced Security screen, select whether you wish tto enable the
security function, and then click Next.

9. At Finalization screen, click Finish - this will complete the FingerPrint
registration process.

Window Logon via FingerPrint Authentication

If required, you are also able to use FingerPrint authentication in place of
the usual Windows logon process using your username and password. This
method is specially useful where there are many users using the same
computer as it removes the need for actual user selection when the system
is started.

FingerPrint Authentication Procedure

1. Start up the computer.

2. At the Logon Authorization screen, choose any of the enrolled fingers
and swipe the FingerPrint on the sensor - If the authentication process
is successful, the user will automatically be logged into Windows.

If the FingerPrint authentication process fails you will need to log into
Windows using the appropriate username and password. In addition, you
should use this manual login process if Finger Print authentication fails for
three consecutive tries - a warning message will be displayed when
authentication is not normal or is not successful within a fixed duration.

Satellite M100 4-7

FingerPrint Power-on Security

General

The FingerPrint authentication system can be used to replace the keyboard
based password authentication system that is used when the computer is
turned on.

If you do not want to use the FingerPrint authentication system for password
authentication when the computer is turned on, but instead prefer to use
the keyboard entry method instead, simply press the BkSP (backspace) key
or the ESC/Rotation button when the FingerPrint Power-on Security screen
is displayed. Using this process will switch the password input screen
across to the keyboard based entry screen.

■ You must ensure that you use the TOSHIBA Password Utility to register

a User Password before using the FingerPrint Power-on Security and
its extended function to allow FingerPrint to be used to access the
computer when it is turned on.

■ If the FingerPrint authentication process fails five times, a preset time

limit is exceeded, or you press the BkSP (backspace) key, [Password=]
will be displayed on the screen and you will have to enter either the User
Password or Supervosor Password manually in order to start the
computer.

Operating Basics

■ When swipe your finger, please ensure you do it slowly and at a constant

speed. If you find that this does not improve the authentication rate, you
should try to adjust the speed at which the finger is swiped.

■ If there are any changes in the environment or setting related to

authorization, you will be required to provide authorization information
such as a User Password (and, if applicable, the HDD (Hard Disk Drive)
password).

How to Enable FingerPrint Power-on Security Settings

It is necessary to first enroll your FingerPrint with the Protector Suite QL
application prior to enabling and configuring the FingerPrint Power-on
Security System. You should check that your FingerPrint is enrolled before
configuring the settings (please refer to the Manual for FingerPrint
Registration/Enrollment for further instructions.)

1. Swipe your finger across the FingerPrint Sensor.

2. MENU will appear in the lower right corner of the screen. Swipe(*) your
finger on the FingerPrint sensor and then select Control Center from the
items presented in this menu

(*) It is recommended that the keyboard cursor keys (movement) and enter
key (selection) or the directional pad be used when selecting and item from
the Menu in laptop or landscape modes.

3. At the FingerPrint Software Management screen, click Settings and
then click Power-on Security.

4. At the Power Security screen, place a check mark in the Replace the
power-on and hard disk drive passwords with the FingerPrint reader
setting and then click OK.

4-8 Satellite M100

FingerPrint Single Sign-On Feature

General

This is a feature that allows the user to complete the authentication for both
the User/BIOS Password (and, if applicable, the HDD (Hard Disk Drive)
Password) and logging onto Windows using only one FingerPrint
authentication when booting up. It is necessary to register the User/BIOS
Password and Windows Logon password before using the FingerPrint
Power-on Security and this FingerPrint Single Sign On Feature. Please use
TOSHIBA Password Utility to register your User/BIOS Password. If
Windows Logon is not the default for your system, see Manual to register
your Windows Logon password.

Only one FingerPrint authentication is required to replace the User/BIOS
Password (and, if applicable, the HDD (Hard Disk Drive) Password) and
Windows Logon Password.

How to Enable FingerPrint Single Sign-On Feature

It is necessary to first enroll your FingerPrint with the Protector Suite QL
application prior to enabling and configuring the FingerPrint Single Sign-On
Feature. You should check that your FingerPrint is enrolled before
configuring the settings (please refer to the Manual for FingerPrint
Registration/Enrollment for furthe instructions).

Operating Basics

1. Swipe your finger across the FingerPrint Sensor.

2. MENU will appear in the lower right corner of the screen. Swipe(*) your
finger on the FingerPrint Sensor and select Control Center from the items
presented in this menu.

(*) It is recommended that the keyboard cursor keys (movement) and enter
key (selection) or the directional pad be used when selecting and item from
the Menu in laptop or landscape modes.

3. At the FingerPrint Software Management screen, click Settings and
then click Power-on Security.

4. At the Power Security screen, place a check mark in the Replace the
power-on and hard disk drive passwords with the FingerPrint reader
setting and then click OK.

FingerPrint utility limitations

TOSHIBA does not guarantee that the FingerPrint utility technology will be
completely secure or error-free or it will be accurately screen out
unauthorized users at all times. TOSHIBA is not liable for any failure or
damage that might arise out of the use of the FingerPrint software.

Satellite M100 4-9

Using the internal modem

This section describes how to setup the modem and use it to connect to
other computer systems. Refer to the computer's online help files and the
online help files for your modem software, for more information.

The internal modem does not support the voice functions described in the
help files. All data and fax functions are supported.

■ In case of a lightning storm, unplug the modem cable from the telephone

jack.

■ Do not connect the modem to a digital telephone line. A digital line will

damage the modem.

* Some computers in this series are equipped with Modem functionality.

IMPORTANT SAFETY INSTRUCTIONS

When using your telephone equipment, basic safety precautions should
always be followed to reduce the risk of fire, electric shock and injury to
persons, including the following:

Operating Basics

1. Do not use this product near water, for example, near a bathtub, wash
bowl, kitchen sink or laundry tub, in a wet basement or near a swimming
pool.

2. Avoid using a telephone (other than a cordless type) during an electrical
storm. There may be a remote risk of electric shock from lightning.

3. Do not use the telephone to report a gas leak in the vicinity of the leak.

4. Use only the power cord indicated in this manual.

Region selection

Telecommunication regulations vary from one country/region to another, so
you will need to make sure the internal modem's settings are correct for the
country/region in which it will be used.

1. Open the Modem Region Select application. It is located on the
Programs menu at TOSHIBA > Networking.

Do not use the Country/Region Select function in the Modem setup utility
in the Control Panel if the function is available. If you change the Country/
Region in the Control Panel, the change may not take effect.

2. The Region Selection icon appears on the Windows Task Bar.

4-10 Satellite M100

The Region Selection icon

3. Click the icon with the primary mouse button to display a list of regions
that the modem supports. A sub menu for telephony location information
will also be displayed. A check will appear next to the currently selected
region and telephony location.

4. Select a region from the region menu or a telephony location from the
submenu.

■ When you click a region it becomes the modem's region selection,

and the New Location for telephony will be set automatically.

■ When you select a telephony location, the corresponding region is

automatically selected and it becomes the modem's current region
setting.

Properties menu

Click the icon with the secondary mouse button to display the following
menu.

Operating Basics

Settings

You can enable or disable the following settings:

AutoRun Mode

Region Select Utility starts automatically when you start up the operating
system.

Open the Dialing Properties dialog box after selecting region.

The dialing properties dialog box will be displayed automatically after you
select the region.

Location list for region selection.

A submenu appears displaying location information for telephony.

Open dialog box, if the modem and Telephony Current
Location region code do not match.

A warning dialog box is displayed if current settings for region code and
telephony location are incorrect.

The properties menu

Satellite M100 4-11

Modem Selection

If the computer cannot recognize the internal modem, a dialog box is
displayed. Select the COM port for your modem to use.

Dialing Properties

Select this item to display the dialing properties.

If you are using the computer in Japan, technical regulations described in
the Telecommunications Business Law require that you select Japan region
mode. It is illegal to use the modem in Japan with any other selection.

Connecting

To connect the internal modem cable, follow the steps below.

■ In case of a lightning storm, unplug the modem cable from the telephone

jack.

■ Do not connect the modem to a digital telephone line. A digital line will

damage the modem.

Operating Basics

1. Plug one end of the modular cable into the modem jack.

2. Plug the other end of the modular cable into a telephone jack.

Connecting the internal modem

Do not pull on the cable or move the computer while the cable is connected.

If you use a storage device such as an optical media drive or hard disk drive
connected to a 16-bit PC Card, you may find that the modem speed is slow
or the communication session might be interrupted.

If you find that the modem speed is low or communication is interrupted
when you are using the modem, please set the CPU speed to Maximum
within the Power Options.

4-12 Satellite M100

LAN

Operating Basics

Disconnecting

To disconnect the internal modem cable, follow the steps below.

1. Pinch the lever on the connector in the telephone jack and pull out the
connector.

2. Disconnect the cable from the computer in the same manner.

The computer is equipped with networking hardware that supports Ethernet
LAN (10megabits per second, 10BASE-T), Fast Ethernet LAN (100 megabits
per second and Gigabit Ethernet LAN (1000BASE-T).

Do not install or remove an optional memory module while the Wake-up on
LAN feature is enabled.

The Wake-up on LAN feature does not work on battery power, you should
always leave the computer connected to the AC adapter if you are using
this feature.

Connecting the LAN cable

The computer must be configured properly before connecting to a LAN.
Logging onto a LAN using the computer's default settings could cause a
malfunction in LAN operation. Check with your LAN administrator regarding
set-up procedures.

If you are using Ethernet LAN (10 megabits per second, 10BASE-T), you can
connect using either a CAT5 or a CAT3 cable.

If you are using 100BASE-TX Fast Ethernet or 1000BASE-TX Gigabit
Ethernet, you must connect using a CAT5 cable.

To connect the LAN cable, follow the steps below.

1. Turn off the power to the computer and to all external devices connected
to the computer.

2. Plug one end of the cable into the LAN jack. Press gently until you hear
the latch click into place.

Satellite M100 4-13

Connecting the LAN cable

3. Plug the other end of the cable into a LAN hub connector. Check with
your LAN administrator before connecting to a hub.

Disconnecting the LAN cable

To disconnect the LAN cable, follow the steps below.

1. Pinch the lever on the connector in the computer's LAN jack and pull
out the connector.

2. Disconnect the cable from the LAN hub in the same manner. Check with
your LAN administrator before disconnecting from the hub.

Wireless LAN

The wireless LAN is compatible with other LAN systems that comply with
the IEEE 802.11a/g wireless LAN standards.

It supports the following:

■ Automatic Transmit Rate Select mechanism in the transmit range of 54,

11, 5.5, 2 and 1 Mbit/s.

Operating Basics

■ Advanced Encryption Standard (AES) data encryption, based on 128bit

Wake-up on LAN does not function on a Wireless LAN.

■ Frequency Channel Selection (2.4 GHz or 5 GHz)

■ Roaming over multiple channels

■ Card Power Management

■ Wired Equivalent Privacy (WEP) data encryption

Network

It may not be possible to make a network connection to a specified network
name using the ad hoc network function. If this occurs, the new network(*)
will have to be configured for all computers connected to the same network
in order to re-enable network connections.

* Please be sure to use new network name.

Security

1. TOSHIBA strongly recommends that you enable the WEP encryption

encryption algorithm. (Revision G combo type.)

function otherwise your computer could be left open to illicit access via
the wireless LAN connection which may result in an intrusion that can
lead to the theft or loss of stored data among other things. In addition,
the owner of an Internet connection is responsible for all browsing,
downloading, and uploading activities on that connection. Therefore, an
unsecured wireless network connected directly to the Internet is an open
invitation for outsiders to abuse your ISP account and privileges.

2. TOSHIBA is not liable for the eavesdropping on your data due to the use
of the wireless LAN connection and any damage that may occur thereof.

4-14 Satellite M100

Bluetooth wireless technology

Bluetooth™ wireless technology eliminates the need for cables between
electronic devices such as desktop computers, printers and mobile phones.

Bluetooth wireless technology has the following features:

Worldwide operation

The Bluetooth radio transmitter and receiver operate in the 2.4 GHz band,
which is license-free and compatible with radio systems in most countries
in the world.

Radio links

You can easily establish links between two or more devices. The link is
maintained even if the devices are not within line of sight.

Security

Two advanced security mechanisms ensure a high level of security:

■ Authentication prevents access to critical data and makes it impossible

to falsify the origin of a message.

Operating Basics

■ Encryption prevents eavesdropping and maintains link privacy.

Bluetooth™ Stack for Windows by TOSHIBA

Please note that this software is specifically designed for the following
operating systems:

®

■ Microsoft

■ Microsoft

■ Microsoft

Detailed information regarding the use with these operating systems is listed
below. Please refer also to the electronic information which is included with
each software.

This Bluetooth™ Stack is based on Bluetooth™ Version 1.1/1.2/2.0+EDR
specification. TOSHIBA cannot confirm compatibility between any PC
products and/or other electronic devices that use Bluetooth™ other than
TOSHIBA mobile PCs.

Windows 2000 Professional

®

Windows XP

®

Windows Vista™

Release Notes related to the Bluetooth™ Stack for Windows
by TOSHIBA

1. Install:
On Windows2000/Windows XP or Windows Vista™, Bluetooth™ Stack

for Windows by TOSHIBA does not have a digital signature.

2. Fax application software:
Regarding FAX application software, there are some software that you

cannot use on this BluetoothTM Stack.

Satellite M100 4-15

3. Multi User:
On Windows Vista™, the use of Bluetooth is not supported in a multi-

user environment. This means that, when you use Bluetooth, other users
logged onto the same computer will not be able to use its Bluetooth
functionality.

Product Support:

The latest information regarding Operating System support, Language
Support or available upgrades can be found on our web site http://
www.toshiba-europe.com/computers/tnt/bluetooth.htm in Europe or
www.pcsupport.toshiba.com in the United States.

Wireless communication switch

You can enable or disable the wireless LAN function with the on/off switch.
No transmissions are sent or received when the switch is off. Slide the switch
forward to turn it on and backward to turn it off.

Turn the switch off in airplanes and hospitals. Check the LED, it stops
glowing when the wireless communication function is off.

Operating Basics

Wireless communication LED

The LED indicates the status of the wireless communication functions.

LED status Indication

LED off Wireless communication switch is set to off.

LED glows Wireless communication switch is on.

Using optical disc drives

The illustrations in this section might differ slightly from your drive, but
operation is the same for all optical disc drives. The full-size drive provides
high-performance execution of disc-based programs. You can run either 12
cm (4.72") or 8 cm (3.15") discs without an adapter. An ATAPI interface
controller is used for disc drive operation. When the computer is accessing
a disc, an indicator on the drive illuminates.

Use the WinDVD application to view DVD-Video discs.

If you have a CD-RW/DVD-ROM drive, refer also to the Writing CDs on CD­RW/DVD-ROM drive section for precautions on writing to CDs.

If you have a DVD Super Multi drive, refer also to the Writing CD/DVDs on
DVD Super Multi drive section for precautions on writing to CDs.

If you have a DVD-ROM, you cannot write to CDs.

4-16 Satellite M100

Loading optical disc media

To load a disc, follow the steps below.

1. Turn on the power.

2. a. Press the eject button to open the drawer slightly.

EJECT BUTTON

Operating Basics

Pressing the eject button

b. Pressing the eject button will not open the drawer when the

computer's power is off. If the power is off, you can open the drawer
by inserting a slender object (about 15 mm) such as a straightened
paper clip into the eject hole just to the right of the eject button.

Satellite M100 4-17

Manual release with the eject hole

3. Grasp the drawer gently and pull until it is fully open.

Pulling the drawer open

4. Lay the disc, label side up, in the drawer.

Operating Basics

Be careful not to touch the lens or the area around it. Doing so could cause
the drive to malfunction.

5. Press gently at the center of the disc until you feel it click into place. The
disc should lie below the top of the spindle, flush with its base.

6. Push the center of the drawer to close it. Press gently until it locks in
place.

If the disc is not seated properly when the drawer is closed, it might be
damaged. Also, the drawer might not open fully when you press the eject
button.

4-18 Satellite M100

Inserting a disc

Removing compact discs

To remove the disc, follow the steps below.

Do not press the eject button while the computer is accessing the disc drive.
Wait for the optical disc indicator to go out before you open the drawer.
Also, if the disc is spinning when you open it, wait for it to stop before you
remove it.

Operating Basics

Closing the drive drawer

1. To pop the drawer partially open, press the eject button. Gently pull the
drawer out until it is fully opened.

■ When the drawer pops open slightly, wait a moment to make sure the

disc has stopped spinning before pulling the drawer fully open.

■ Turn off the power before you use the eject hole. If the disc is spinning

when you open the drawer, it could fly off the spindle and cause injury.

2. The disc extends slightly over the sides of the drawer so you can grasp
it. Hold it gently and lift it out.

3. Push the center of the drawer to close it. Press gently until it locks into
place.

Satellite M100 4-19

Removing a disc

Buttons

The Internet button and the CD/DVD button can be assigned other functions
by Button Support Utility.

1. Move mouse cursor and reach the top of desktop screen. The back

2. "Button Support" white card fully appears. After double click this card,

3. Change function of Buttons.

Operating Basics

cards and white cards appear. Click “Button support” white card.

the dialog for changing button function is displayed.

TOSHIBA Button Support

CD/DVD play control buttons

In addition to the power button, the following four buttons control functions
relating to the playback of optical media and digital audio data:

Play/Pause Starts or pauses play

Stop Stops play

Next Advances to the next track, chapter or data

Previous Returns to the previous track, chapter or data

If Random or Shuffle is selected in Windows Media Player, selecting Next
or Previous advances to a random selection.

4-20 Satellite M100

*Writing CDs on a CD-RW/DVD-ROM drive

You can use the CD-RW/DVD-ROM drive to write data to CD-R/RW discs.
The following applications for writing are preinstalled:
Record Now!/DLA, licensed by Sonic Solutions.

Important message

Before you write or rewrite to CD-R/RW media, read and follow all setup
and operating instructions in this section. If you fail to do so, the CD-RW/
DVD-ROM drive may not function properly, and you may fail to write or
rewrite, lose data or incur other damage.

Disclaimer

TOSHIBA does not bear responsibility for the following:

■ Damage to any CD-R/-RW disc that may be caused by writing or

rewriting with this product.

■ Any change or loss of the recorded contents of CD-R/-RW media that

may be caused by writing or rewriting with this product, or for any
business profit loss or business interruption that may be caused by the
change or loss of the recorded contents.

Operating Basics

■ Damage that may be caused by using third party equipment or software.

Given the technological limitations of current optical disc writing drives, you
may experience unexpected writing or rewriting errors due to disc quality
or problems with hardware devices. Also, it is a good idea to make two or
more copies of important data, in case of undesired change or loss of the
recorded contents.

CD-R discs can be written only once. CD-RW discs can be rewritten many
times.

Before writing or rewriting

Please observe the following points when you write or rewrite the data.

■ We recommend the following manufacturers of CD-R and CD-RW

media. Media quality can affect write or rewrite success rates.

CD-R: TAIYOYUDEN CO., LTD.

MITSUBISHI CHEMICAL CORPORATION
RICOH Co., Ltd.
Hitachi Maxell Ltd.

CD-RW: MITSUBISHI CHEMICAL CORPORATION

RICOH Co., Ltd.

Satellite M100 4-21

Operating Basics

TOSHIBA has confirmed the operation of CD-R and CD-RW media of the
manufacturers above. Operation of other media cannot be guaranteed.

■ CD-RW can generally be rewritten about 1,000 times. However, the

actual number of rewrites is affected by the quality of the media and the
way it is used.

■ Be sure to connect the universal AC adapter when you write or rewrite.

■ Be sure to close all other software programs except the writing software.

■ Do not run software such as a screen saver which can put a heavy load

on the CPU.

■ Operate the computer at full power. Do not use power-saving features.

■ Do not write while virus check software is running. Wait for it to finish,

then disable virus detection programs including any software that
checks files automatically in the background.

■ Do not use hard disk utilities, including those intended to enhance hard

disk access speeds, as they may cause unstable operation and damage
data.

■ Write from the computer's hard disk drive to the CD. Do not try to write

from shared devices such as a LAN server or any other network device.

■ Writing with software other than TOSHIBA Disc Creator has not been

confirmed. Therefore, operation with other software cannot be
guaranteed.

When writing or rewriting

Please observe/consider the following when you write or rewrite to a CD-R/
RW, DVD-R/-RW/-RAM or DVD+R/+RW disc.

■ Do not perform any of the following actions when writing or rewriting:

■ Change users in the Windows Vista™ operating system.

■ Operate the computer for any other function, including using a

mouse or TouchPad or closing/opening the LCD panel.

■ Start a communication application such as a modem.

■ Apply impact or vibration to the computer.

■ Install, remove or connect external devices such as PC card, USB

devices, an external display, i.Link devices or optical digital devices.

■ Use the audio/video control button to reproduce music or voice.

■ Open the drive.

4-22 Satellite M100