Toshiba G00H088 Service Note
BSINo. G00H088 Page 1
BSI No.: G00H088
Publish
2000/11/06
Date:
Subject: ROM Version Improvement (SYS: Ver.0196 --> 0207) <Correction: Oct.
31, 2000>
Model: DP4580, DP5570, DP6570, DP8070
Category Field Application UNIT
To improve the reliability Others Software
FactoryApplication: Applicable from 8/A, 2000 at the factory
CONTENT
The ROM versions has been changed as follows.
[Changed/Added Part No.]
MODEL P-I Before Change After Change Note P I R FAA
DP4580
DP5570
DP6570
DP8070
37-29
4406386290
PMA-T300SU0196
4406386310
PMA-T300SX0196
4406386300
PMA-T300SE0196
P-I: Page-Item P: Contents of Change I: Interchangeability R: Reasons for Change
[Changed Contents]
4406386360
PMA-T300SU0207
4406386380
PMA-T300SX0207
4406386370
PMA-T300SE0207
<Upgrade function/Improved item>
1. Function Clear when there is no key copy counter
When the key copy counter or the card is pulled out, all the setting contents will be cleared. Only
when the setting value of 08/202 is 2 or 3, this function is effective.
Setting Mode (08)
Code Name Mode Image
Mode
202 Externally
202 Externally
installed copy
installed copy
counter/contr
counter/contr
ol device
ALL 0 0~3 Function
ALL 0 0~3
Default Allowable
input value
Contents Procedure
0: No external copy
counter/control device
1: Coin controller
2: Copy key card
3: Key counter
NAD
ASD,AUD
TWD,SAD
MJD,UKD
C B J Y
C B J Y
C B J Y
Clear
Not
applied
Not
applied
Applied
Applied
Group
1
BSINo. G00H088 Page 2
2. Change of restart timing of printer job after jam released
If jam may occur during printing job of the LAN printer or SC-2:
When [READY] was displayed again after jam released, current printer job has been restarted
after the Automatic Function Clear mode activated.
Now, the printing can be restarted right after [READY] is displayed even before the automatic
function clear mode activates.
3. Change of part of display massage while tandem copying and tandem printing
When either of the two copiers has finished making copies, [WAIT] has been displayed. This is
changed to [Another copier is processing a job].
[Combinations of ROM Versions]
They should never be operated except in the following combinations.
As only the following combinations can have their operation checked, errors could well occur
with other combinations.
The system ROM (0207) is not guaranteed for ROM combinations from each month of
production except under the following conditions. When only the system ROM is updated, the
corrected/changed contents of new ROM in other ROMs (printer ROM, laser ROM, etc.) are not
applicable. When corrected/added contents for related BSIs are needed, it is recommended to
update the other ROMs together with the system ROM update.
zzzz
Up to and including May 1999 factory: Printer is used Ver.07. (The version at the factory is
different.)
Factory
application
System
ROM
Printer ROM Laser
PRA
- 304M
PRA
- 302M
1st lot 0207 -- -- 07 06 06 06 03
1999/5 0207 -- -- 07 07 06 06 03
1999/7 0207 -- -- 07 08 06 06 03
1999/9 0207 -- 02 08 08 07 06 03,04
2000/4 0207 01 03 09 09 07 07 04
2000/5 0207 01 03 09 10 07 07 04
2000/6~ 0207 01 03 09 10 07 07 04
Table of History of ROM Version Combination
Time of Application
System
ROM
Printer
ROM
1st lot 0075 05 06 06 05 1999/5 0086 06 07 06 06 F99E643
1999/6 (0097)
07 08 06 06 F99F680
0108
PRA
- 300M
Laser
ROM
ROM
Scanner
ROM
Scanner
ROM
PFC
PFC RADF
ROM
BSI No
F99E644
F99F684
Time of
application
System
ROM
Printer ROM Laser
PRA
- 304M
PRA
- 302M
PRA
- 300M
ROM
Scanner
ROM
PFC Finisher ROM RADF
ROM
Saddle Stacker
BSI No
1999/7 0129 -- -- 07 08 06 06 04 05 03 F99G727
1999/9 0130 -- 02 08 08 07 06 04 05 03,04 F99H748
F99J825
1999/10 0141 -- 02 08 08 07 06 04 05 04 F99J795
Loading...