Toshiba G00E035 Service Note

BSI No.: G00E035 Publish

2000/05/22

Date: Subject: Change of Parts of Sorter Kit (KN-FC22S01)

Model: MG2014

Category Field Application UNIT

Other countermeasures To be applied when necessary Sorter

FactoryApplication: From May at the factory (Serial No. 0041046)

CONTENT

BSINo. G00E035 Page 1

[Phenomenon]

When the sorter is pulled out from the copier (FC22), the magnet catch of the sorter may be removed from its bracket.

[Cause]

When the sorter is pulled out slantwise,

Push the holding part by the magnet. claw of the holder may be removed.

In this process, the magnet-catch is removed from the bracket.

Bracket

Claw

The holding part becomes bent. The

The holding part is removed

Magnet-catch

Bent

Magnet Holding part

[Countermeasure]

If the holding part becomes bent, a holding plate has been added the magnet catch from 1. becoming renewed. To prevent the possibility of the magnet catch coming off, the window of the bracket has been 2. made narrower.

[Changed/Added Part No.]

Claw

BSINo. G00E035 Page 2

P-I

50-21

50-23

50-24

Before Change After Change Note P I R

4400598370 BRKT-MAGNET-F 4400598400 BRKT-MAGNET-R

4400598610 BRKT-MAGNET-F 4400598630 BRKT-MAGNET-R

--- 4400598680 PLAT-MGNT-BKT-F

50-25

-- 4400598690 PLAT-MGNT-BKT-R

50-508

-- 7043300613 BID30*06MSCR1AI

P-I: Page-Item P: Contents of Change I: Interchangeability R: Reasons for Change

508

FAA

C B D -

A - D -

P.50

Attached File