Toshiba G00D020 Service Note
BSINo. G00D020 Page 1
BSI No.: G00D020
Publish
2000/04/27
Date:
Subject: Supplementary Explanation of Setting Mode (08) Counter
Model: FC22
Category Field Application UNIT
Correction of Service Manual Others Documents
FactoryApplication: -
CONTENT
An explanation of each counter has been supplied in setting mode "08". Refer to the following
attached file for the supplementary explanation.
z
Correlation with display contents of each counter, purpose and double counting setting
Check items during PM
z
Unused items have been clarified for controll and service. (Unused is shown as the "purpose".)
z
Attached File
G00D020.xls
Related Documents:
LinkTo: Link From:
FC22 counter function and maintenance check list
* Unused counters have been included in the setting mode 08 code list. Checking and the purpose thereof during maintenance have been clarified.
Refer below.
Code Name Default Allowable
801 Electronic total copy/print counter 0 0～999999 Electronic counter counts all copies and
802 Large paper size double counter 0 0～2 0: Disabled
805 Full-color print counter(PPC) 1
806 Black print counter(PPC)
807 Mono-color print counter(PPC)
810 Full-color print counter(PRT)
811 Black print counter(PRT)
812 Mono-color print counter(PRT)
813 Test print counter In case of Test print, only this counter is
892 Current counter value for PM (display/0
clearing)
857 Counter setting for PM 0 0～999999 Counter value (number or sheets) 1 Setting Set at the time of the PM.
896 Current counter value for color PM
(display/0 clearing)
897 Counter setting for color PM 0 0～999999 Counter value (number of sheets) 1 Setting Set at the time of the color PM.
858 OHP/thick-paper double count 1 0～1 0: Disabled:
844 Developer Y counter (display/0 clearing)
845 Developer M counter (display/0 clearing)
846 Developer C counter (display/0 clearing)
847 Developer K counter (display/0 clearing)
867 Drum Y drive counter (display/0 clearing) Rotation time of Y drum drive motor (sec.)
868 Drum M drive counter (display/0 clearing) Rotation time of M drum drive motor (sec.)
input value
prints including all test mode copies.
* The mechanical counter only counts the
customers' copies and prints, not test mode
copies or prints.
1: Double count-A3, LD, A3 wide
2: Double count-A3, LD, A3 wide, B4, LG,
00～999999 Display of counter value (Code 08-802 is
00～999999 Total number of sheets (Copier+printer) for
00～999999 Number of color printed sheets
01
0～999999 Number of printed sheets
01
0～999999
FOLIO, COMP
reflected)
counted.
Display of counter value
life related (double count)
Display of counter value (Code 08-858 are
reflected.)/0 clearing
Display of counter value (Code 08-858 are
reflected)/0 clearing
Double count-A3 wide, A3, LD, B4, LG,
FOLIO, COMP
1. Enabled:
Quadruple count-A3 wide, A3, LD, B4, LG,
FOLIO, COMP
Double count-A4, A4-R, LT, LT-R, B5, B5R, ST-R, A5, A6-R
Display of counter value (Code 08-858 is
reflected)/0 clearing
Display of counter value/0 cleaning
Display of counter value/0 clearing
Contents Operation
procedure
group
1 Addition Check the total number of sheets
1 Mode
1 Addition/0
1 Addition/0
1 Mode
Type Check list during the
Selection
Addition Check the total number of sheets
clearing
clearing
Selection
Addition/0
clearing
(paper
quantity
counter)
Addition/0
clearing (time
counter)
MODE selection by sheet size of
double count
output in each printing mode
At the time of the PM, clear to 0.
At the time of color PM, clear to
0.
Double count setting according to
paper size in OHP/thick paper
mode
When adjusting the auto toner
sensor at the time of changing
the developer, automatically clear
to 0.
At the time of changing the drum,
clear to 0 without fail.
maintenance
Charge calculation
・Setup of PM cycle
・Life management of
the consumption parts
Control of density in
comparison to
developer and toner
Control to maintain
image quality
Purpose
Page 1
Loading...