Toshiba G00D007 Service Note

BSINo. G00D007 Page 1

BSI No.: G00D007 Publish

2000/04/24

Date: Subject: Correction of Errors of Input Check Mode (03)

Model: FC22

Category Field Application UNIT

Correction of Service Manual To be applied when necessary Documents

FactoryApplication: -

CONTENT

Some errors have been found in the Service Handbook. These have been corrected as follows.

Service Handbook

1.2.1 Input check (Test mode 03)

[FULL COLOR] key: OFF, [AUTO COLOR] key: OFF, [ENERGY SAVER] key: OFF

Digital

key

[6] A [7] B [8] A

[9] A

[0] H Sorter unit installed or not

[FULL COLOR] key: OFF, {AUTO COLOR] key: OFF, [ENERGY SAVER] key: ON

Digital

key

[6] C

Icon Item Condition

LCF paper empty sensor 0 --> 1: No paper ADU paper empty switch 1 --> 0: No paper Developer removal shutter home position sensor External printer controller power ON/OFF

D E

G Registration sensor

Icon Item Condition

Front-cover switch 0 -->1:Front cover is open OHP center sensor 1 --> 0: Opaque paper is

OHP edge sensor 1: Opaque paper is installed

Printer controller (External type, Built-in type) connecting confirmation

1 --> 0: Shatter is closed 1 --> 0:Controller power ON

installed

(Caution)

0 --> 1 :Paper exist 0: Unit is installed (Caution)

0: Connected (Caution)

[FULL COLOR] key: OFF, {AUTO COLOR] key: ON, [ENERGY SAVER] key: ON

BSINo. G00D007 Page 2

Digital

key

[6] F

Note)

"OHP edge sensor", "Sorter unit installed or not", "Printer controller (External type, Built-in type)" connecting confirmation" and ADF timing sensor" have been deleted as unrequired functions.

Attached File

Icon Item Condition

ADF timing sensor 1:Original exist (Caution)