BSI No.: G00D005
Publish
2000/10/13
Date:
Subject: Conformity of ROM <Correction: Oct.12, 2000>
Model: DP4580, DP5570, DP6570, DP8070
Category Field Application UNIT
To improve the reliability, New
Model Description
FactoryApplication: 4/A
Others Software
BSINo. G00D005 Page 1
CONTENT
The ROM version has been altered as follows.
[Changed/Added Part No.]
MODEL P-I Before Change After Change Note P I R FAA
DP4580
DP5570
DP6570
DP8070
DP4580
DP5570
DP6570
DP8070
P-I: Page-Item P: Contents of Change I: Interchangeability R: Reasons for Change
37-29
37-31
62-43 4406382980
37-30 4406383000
62-33 4408856000
62-43 4408856010
37-30 4408856070
4406386090
PMA-T300SU0173
4406386110
PMA-T300SX0173
4406386100
PMA-T300SE0173
4406385790
K-SRAM-T300SU
4406385810
K-SRAM-T300SX
4406385800
K-SRAM-T300SE
4406383080
PRA-300M-08
4407893020
PRA-302M-01
PRA-300F-06
PRA-300L-08
PRA-304M-00
PRA-304F-00
PRA-304L-00
4406386160
PMA-T300SU0185
4406386180
PMA-T300SX0185
4406386170
PMA-T300SE0185
4406386230
K-SRAM-T300SU
4406386250
K-SRAM-T300SX
4406386240
K-SRAM-T300SE
4406383180
PRA-300M-09
4407893050
PRA-302M-03
4406383200
PRA-300F-07
4406383190
PRA-300L-09
4408856080
PRA-304M-01
4406383200
PRA-300F-07
4406383190
PRA-300L-09
NAD C B J Y
ASD,AUD,TWD,SAD C B J Y
MJD,UKD C B J Y
NAD C D J Y
ASD,AUD,TWD,SAD C D J Y
MJD,UKD C D J Y
C B J Y62-33
C B J Y
C B J Y
C B J Y
C B J Y
C E J Y
C B J Y
They have been applied for DP8070 from the first lot at the factory.
[Changed Contents]
BSINo. G00D005 Page 2
SYS-ROMz
z
zz
Support for DP8070
* Function extension
* Correction of errors
[Expanded Function]
1. Mixed document size
Only the combinations of LT-R/LG,A4/A3,B4/B5 can be copied.
Combination of LT/LD has been added to the PPC automatic original detection possibility.
2. Mixed paper size staple
Up to now stapling of mixed sizes was impossible, but is now possible.
(But this is only possible "Mixed document size")
3. Saddle stitcher
Even if there is only 1 sheet, this is sent to the saddle section and folded.
4. Cover sheet mode
No limitation for feeding cassette selection
5. Duplex productivity improvement and prevention of the tearing of the paper trailing edge
When sorting up fifteen sheets and multiple copies are selected, so that multiple copies can be stacked
in the ADU, the ADU speed has been improved.
The paper trailing edge stability is also improved by this control.
6. Print Job cascade
Print jobs can now be performed by means of finisher cascade.
[Correction of errors]
1. When printing with a combination with saddle stitching (magazine sort + staple) and cover
sheet insertion, if a saddle tray-full error occurs, the printing cannot be restarted even if this is
released. This situation has been corrected.
2. The added time in the annotation function (date/time) and the displayed time on the LCD
panel may become mismatched. This error has been corrected.
3. In the AMS (automatic magnification selection) setting for the mixed original sizes, when the
original size is alternately combined LT-R and LG, the magnification display in the copying may
not be changed. This error has been corrected.
zzzz
SYS-RAM
Addition of new 08 code
08/488 For alignment between the SYS-ROM and MROM
When SYS-ROM(Ver.0185) is downloaded, the following conditions are necessary.
After April at the factory (MROM Ver.09) [1: initialization value]
Up to and including March at the factory (MROM Ver.08) [0: Initialization value]
zzzz
MROM (300M-09,302M-03)
1. Addition of model code for
DP8070
2. Reduction of drum running overlap time during PPC-PRT exchanging
3. Add the initial alignment operation for the ADU ( 08/487)
4. ADU end guide shifting amount adjustment (05/464)
FROM
zzzz
1. Countermeasure to ADU horizontal deviation adjustment
2. Countermeasure to paper feed error in ADU
zzzz
LROM
Countermeasure to power consumption during MFP (Energy Star)
BSINo. G00D005 Page 3
Note)
05/464,08/487,08/488 have been listed in the following Service Manual which has been newly released.
Service Handbook
DP8070/6570/5570/4580
[Combination of ROM Version]
Note for the factory-shipped present models (Combination of SYS-ROM and MROM)
For the factory-shipped present models, when SYS-ROM and MROM are newly improved at the
same time (T300S*0185,300M-09/302M-03), be sure to set
08/488 value "1"
. Then, there is no
problem when the PFC is 300F-06. When only ADU paper feeding error or horizontal deviation is
tackled, be sure to improve to 300F-07. So, when the PFC is not improved, 05/464 end guide
movement amount adjustment should not be performed.
They should never be operated except in the following combinations.
As only the following combinations can have their operation checked, errors could well
occur with other combinations.
DP4580/DP5570/DP6570
System ROM PMA-T300S*zzzz 0185
Printer ROM PRA-300M-zz
Laser ROM PRA-300L-zz 09
Scanner ROM PRA-300S-zz 07
PFC PRA-300F-zz 06,07
Finisher ROM
(Saddle)
Finisher ROM
(Stacker)
RADF ROM PRA-794DF-zz 04
DP8070
System ROM PMA-T300S*zzzz 0185
Printer ROM PRA-304M-zz 01
Laser ROM PRA-300L-zz 09
Scanner ROM PRA-300S-zz 07
PFC PRA-300F-zz 07
Finisher ROM
(Saddle)
Finisher ROM
(Stacker)
RADF ROM PRA-794DF-zz 04
09
PRA-302M-zz
03
PRA-502FIN-zz 05
PRA-793FIN-zz 06
PRA-502FIN-zz 05
PRA-793FIN-zz 06
Table of History of DP3580 ROM Version Combination
BSINo. G00D005 Page 4
Time of Application
1st lot at the
System
ROM
Printer
ROM
Laser
ROM
Scanner
ROM
PFC
0075 05 06 06 05 -
BSI No
factory
1999/5 0086 06 07 06 06 F99E643
F99E644
1999/6 (0097)
0108
Time of
Application
System
ROM
PRA
- 304M
07 08 06 06 F99F680
Printer ROM Laser
ROM
PRA
- 302M
PRA
- 300M
Scanner
ROM
PFC Finisher ROM RADF
F99F684
BSI No
ROM
Saddle Stacker
1999/7 0129 -- -- 07 08 06 06 04 05 03 F99G727
1999/9 0130 -- 02 08 08 07 06 04 05 03,04 F99H748
F99J825
1999/10 0141 -- 02 08 08 07 06 04 05 04 F99J795
1999/11 0152 -- 02 08 08 07 06 04 05 04 F99K838
2000/1 0163 -- 02 08 08 07 06 05 06 04 F99K845
F99K846
F99K863
F99K864
F99L866
2000/2 0173 -- 02 08 08 07 06 05 06 04 G00B932
2000/4
2000/4
0185
0185 01
--
03 09 09
-- --
09
07
07
06,07
07
05 06 04 G00D005
05 06 04
-----------------------------------------------------------------Oct. 12, 2000: Addition of explanation --- SYS-ROM [Correction of errors]
Attached File
Related Documents:
LinkTo: Link From:
Loading...