Toshiba f99k860 Service Note

BSI(Service Note) TOSHIBA

TOSHIBA TEC CORPORATION

2-4-1, Shibakoen, Minato-ku, TOKYO, 105-8524 JAPAN

BSI No

F99K860

SUBJECT

Release of SC-1 Version 1.1 Software

MODEL

CATEGORY

Other countermeasures

-

CONTENT

Overview: Announcing the release of SC-1 Controller Software version 1.1.2.1, SC-Client
Software version 1.1.16, SC-PostScript Driver version 1.1.16, SC-Fax version 1.1.16 and
SC-Tech version 1.1.16. This software provides additional features and support for the
DP2460, DP2570 and DP3580 copiers

SC-1

FIELD APPLICATION

Others

FACTORY APPLICATION

Date

UNIT

Software

99/11/19

-

In addition, DSE is distributing Software Update Kits to update the customers who own SC
Software version 1.0. The software in these kits include SC-1 Controller Software version

1.1.2.6 and SC-Client Software version 1.1.16.6. The other software components have
remained the same. For details on the differences between the software in the production
release and the software in the update kits, please look further in this document.

1. Dependencies

The SC-1 Controller Software Version 1.1.2 requires the following engine FROMs:

FROM LOWER UPPER
DP2460 T220S267 T220S1xx65
DP2570 T222S2UE06 T222S1xx06
DP3580 T230S2UE10 T230S1xx10

Additional ROM information:

DP2460 Main ROM Version T220M-190 or T220M-200
DP2460 PFC ROM Version 220PFC-06
DP2460 Finisher ROM Version 14 or later
DP2460 RADF ROM Version 08 or later

The latest SC-Fax/Modem firmware revision is 023Q.

2. New Features/Enhancements

The following major new features have been added to Version 1.1 software. A complete
report on all closed and remaining field claims will be sent separately.

BSI No. F99K860 Page 2

SC-1 Controller

Support for the DP2460, DP2570 and DP3580 Digital copiersl
The SC-1 is now fully Netware 5 compliant in PSERVER and NPRINTER modes l
(non-NDPS)
Support for user-selectable refresh rates which are preserved across multiple sessions l
of use
Euro-character supportl
New RESET button in Network/Printer>Admin LCD screen to clear the SC-1 network l
settings and prepare it for a new or different connection. Please note that this is a
recently added feature and it is not documented in the SC-1 Administrator's Guide
When the SC-1 is shutdown, either from the LCD panel or from within SC-Admin it will l
now power off itself
The SC-1 Registry is now automatically backed up at 3:00 AM each day. Please refer to l
DSE Service Bulletins I2 and I3 for details
The SC-1 will no longer browses the network and thus generate unwanted network l
traffic. Please see the Update Kits section later in this document for additional details.
The Swap file system within the SC-1 has been tuned for optimal performancel
When the specified cassette does not have the correct paper size, the user will be l
prompted on the LCD to load the appropriate paper in the Bypass tray. If
AUTOCONTINUE is set to NONE, the job will be canceled after 60 seconds have
expired
During Walk-Up fax from the platen, if the user input is inactive for over 40 seconds l
before pressing NEXT, the fax job will be canceled. If the user input is inactive after
pressing NEXT but before pressing DONE for over 40 seconds, the fax job will be sent
with the pages scanned

Printer Drivers (PCL and PostScript)

Support for the DP2460, DP2570 and DP3580 Digital copiersl
Support for Windows 98l
Cover sheet on front and back of the documentl
Watermarksl
New stapling positions for MJ-1005 Finisher [DP3580-Only]l
Driver Settings Summary screenl
User-selectable SC-Monitor refresh rates which are preserved across multiple sessions l
of use.

SC-Admin

Support for the DP2460, DP2570 and DP3580 Digital copiersl
Notifications for Device Errors/Warnings come complete with user interfaces for l
selecting the notification criteria (which events will result in notification) and the
notification selectable method (audible {ding} and/or visible {pop-up}) prompting
Support for remote Reboot/Shutdown of SC-1l
Support for Manual SC-1 Device Discovery with exposing directory structure of the l
shared location
User-selectable refresh default rates which are preserved across multiple sessions of l
use for better user-control of status polling
Changing the Netware/Microsoft printing configuration in SC-Admin, no longer reboots l
the SC-1. The new setting will take effect after a short delay
In the case of a non-UC installation, the Client Software footprint during a primed l
installation has been greatly reduced. The administrator now has the option to install
only the language selected