Toshiba f99k841 Service Note

BSI(Service Note) TOSHIBA

TOSHIBA TEC CORPORATION

2-4-1, Shibakoen, Minato-ku, TOKYO, 105-8524 JAPAN

BSI No

F99K841

SUBJECT

Error during Image Input

MODEL

CATEGORY

Treatment in the field

--------

CONTENT

05-341), resolution, mode, reproduction ratio and original size are used in combination as in
the following list, the following errors occur. How to avoid these errors is described in this
BSI.

DP3580

FIELD APPLICATION

To be applied when necessary

FACTORY APPLICATION

If the scanner secondary scanning reproduction ratio (adjustment mode 05-304 or

UNIT

Other

Date

99/11/10

----

[Error Combination]

05-304 or 05-341 Resolution Mode Reproduction

Original size

ratio
116 - Copier 108% LG
118 Normal FAX --- A4-R
119 Normal FAX --- B4

[Errors]

Copier mode:l
When the halogen lamp comes ON, though the carriage is returned to its home position
after its movement, the copier goes into standby condition and the copy does not exit.
FAX mode:l
When the halogen lamp comes ON, the carriage is returned to its home position after its
movement. "Not allowed now" is displayed on the LCD after a short time and the "Alarm"
LED of the FAX lights. The standby condition is entered by pushing down the FC key.

[Treatment method]

When the above errors are found in the field, perform either the following "1" or "2".

Replace the System ROM with the type after version 10.1.
05-304 and 05-341 values are reset in the following list.2.

Error value occurring 05-304
and 05-341

116
118
119

New value in 05-304 and

05-341

117
117
120