Toshiba f99j804 Service Note

BSI(Service Note) TOSHIBA
TOSHIBA TEC CORPORATION
2-4-1, Shibakoen, Minato-ku, TOKYO, 105-8524 JAPAN
BSI No
F99J804
Version Improvement of Board firmware (for Network Card)
MODEL
CATEGORY
Other countermeasures
From Oct. 1999
CONTENT
NIC board firmware used for the KR-7010, KR-7011, KR-7017 and KR-7018 are shown below. Refer to the Service Manual for the improvement method. The necessary file for improvement will be supplied separately. Refer to information concerning the ROM combination of each copier in which this board is used.
DP2570, DP3580, DP4580, DP5570, DP6570
FIELD APPLICATION
Others
FACTORY APPLICATION
Date
UNIT
Software
99/10/26
DTM-F9916
[Changed Contents]
1. Web Utility Correction of error in which utility and print history display cannot be opened.l Correction of position error of "Printer information" BOX in utility. l Correction of error in which Web Utility sometimes cannot respond. l Correction of error in which print request cannot be received for five minutes when Web Utility is l stopped. Correction of error in which Web Utility is stopped during re-reading. l Correction of error in which file name may not be correctly displayed in the printing history.l Correction of error in which the dialog cannot opened when the reset key of the printer counter is l pushed.
2. Printing Problems during printing at the same time on "Peer to Peer network" configuration in Windows l NT/95. (Correction of error in which the printing data which are sent from the PC cannot be correctly printed.)
3. FTP problems during (FW update) FTP client performance has been improved.l
[Information for Version]
After this change, V5.48 is indicated on "Network Interface Card" in the setting list printing. (The ROM version at shipment has been listed on the rear board.)
[Necessary File for Version Improvement]
"tos548 a.exe" (data for version up)l "ftpdl122c.zip" (software for version improvement in TCP/IP)l "FlashUp121.zip" (software for version improvement in SPX/IPX)l
Loading...