Toshiba f99j797 Service Note
BSI(Service Note) TOSHIBA
TOSHIBA TEC CORPORATION
2-4-1, Shibakoen, Minato-ku, TOKYO, 105-8524 JAPAN
BSI No
F99J797
SUBJECT
Correction of Errors in the Service Manual
MODEL
CATEGORY
Correction of Service Manual
--------
CONTENT
Some errors have been corrected as shown on sending PDF type file (corrected points shown by
shaded points).
English
MJ1003
FIELD APPLICATION
Others
FACTORY APPLICATION
Date
UNIT
Finisher
99/10/22
----
SM_E.pdf
CHAPTER 1
II. SPECIFICATIONS
Stacking method 3-tray ascending/descendung type
Number of trays 3
Stacking types
Face-up Simple stacking, job offset or stapled
Paper types (Note 1) Plain paper, colored paper, thick paper, labels, OHP film, envelopes
Paper sizes Plain paper of A3, B4, A4, A4-R, Ledger, Legal, Letter, B5, B5-RA5 and
executive-size and 98.4mm x 190.5mm (min.) ~ 297mm x 432mm (max.)
(64 ~ 128 g/m2 recommended paper)
Envelopes for Monarch, COM-10, DL, B5, C5
Envelopes of 98.4mm x 190.5mm (min.) ~ 176mm x 250mm (max.)
Tray capacity Tray 1: Approx. 475 sheets of 80 g/m2 paper
(570 sheets of 20 lbs paper)
Tray 2: Approx. 510 sheets of 80 g/m2 paper
(615 sheets of 20 lbs paper)
Tray 3: Approx. 510 sheets of 80 g/m2 paper
(615 sheets of 20 lbs paper)
Stapler unit
Staple type Straight type (exclusive for Finisher)
Staple replacement Cartridge type
Cartridge capacity 1000 staples/cartridge
Number of sheets stapled 2 ~ 20 sheets of 64 g/m2 paper per set per tray (Any of max. 30 sets, 300
sheets or stacking height of 88mm (tray 1) or 95mm (Tray 2 or 3))
Stapling positions One point diagonal (nearer corner), one point parallel (farther corner) or two
points parallel (middle)
Paper sizes A3, B4, A4, A4-R, B5, Ledger, Legal, Letter
Power consumption 100W or less
Dimensions (Note 2) 676 × 613 × 989 (mm)
Weight 27.5 kg (approx.)
Line voltage requirments 24V (From finisher)
Notes: 1. Labels and OHP film are delivered face-up to the tray. Paper can also be delivered to a tray that has
been preset at the copier according to the mode in use-copy, printer, or fax.
2. Width × Depth × Height
Specifications are subject to change with product modification.
1 - 2
Loading...