Page 1
BSI(Service Note) TOSHIBA
TOSHIBA TEC CORPORATION
2-4-1, Shibakoen, Minato-ku, TOKYO, 105-8524 JAPAN
BSI No
F99G718
SUBJECT
Change of Air Filter (Scanner Area of Front Side)
MODEL
CATEGORY
To improve the productivity
From Mar. 1999
CONTENT
To improve productivity, the following parts have been changed (same as BSI/F99C545).
[Changed/Added Part No.]
MODEL P-I Before Change After Change Note P I R
DP2460
DP2570
P-I: Page-Item P: Contents of Change I: Interchangeability R: Reasons for Change
DP2460, DP2570
FACTORY APPLICATION
8-31
8-32
4401962850
COV-FILTER-FAN
4408676990
FILTER-SCAN-F
FIELD APPLICATION
To be applied when necessary
4402946040
K-COV-FILTER
4402946040
K-COV-FILTER
Date
UNIT
Optical
Unification to
new part of
item 31
99/07/22
DTM-F9204
FAA
C E G -
Note
1. COV-FILTER (P.8-#.31) has been changed so that its composition includes the FILTER
(P.8-#.32), and the FILTER (P.8-#.32) is supplied individually and is not a service part.
Page 2
BSI No. F99G718 Page 2
2. When the current part "FLTER(P.8-#.32)" is installed, be careful that the FILTER (P.8-#.32) does
not come from the window of the COV-FILTER (P.8-#.31). (see below)
* If FILTER (P.8-#.32 (especially the attachment point of the double-sided tape: arrow A in the
figure on right) protrudes from the window of the COV-FILTER (P.8-#.31), where it contacts the
fan of the FAN-DC-210N (P.8-#.29) and causes the generation of noise.
COV-FILTER
FILTER
A
Loading...