BSI(Service Note) TOSHIBA
TOSHIBA TEC CORPORATION
2-4-1, Shibakoen, Minato-ku, TOKYO, 105-8524 JAPAN
BSI No
F99F682
SUBJECT
Elimination of Teflon Tape in ADU Holding Gate
MODEL
CATEGORY
Other countermeasures
From June 1999 at the factory
CONTENT
For smoother contact between the ADU holding gate and sheet, the Teflon tapes have been
attached.
However, the Teflon tapes have been eliminated for the following reason.
* There is a possibility that a jam may be caused by stickiness left from the peeling of the Teflon
tapes .
* The Teflon tapes do not need to be attached for smooth contact.
DP5570, DP6570
FIELD APPLICATION
To be applied immediately
FACTORY APPLICATION
Date
UNIT
ADD/ADU
99/06/25
DTM-F9604
Note
* Colorless Teflon tapes are attached at the two points as shown below.
* If there is some peeling, be sure to take it off completely.
Holding gate
Peeling
Teflon tape
Teflon tape
[Changed/Added Part No.]
P-I Before Change After Change Note P I R FAA
24-9 4406344750
K-SHAFT-GATE-2
P-I: Page-Item P: Content of Change I: Interchangeability R: Reason for Change
4406344610
K-SHAFT-GATE-2
C E J -