BSI(Service Note) TOSHIBA
TOSHIBA TEC CORPORATION
2-4-1, Shibakoen, Minato-ku, TOKYO, 105-8524 JAPAN
BSI No
F99F676
SUBJECT
Abnormal Noise (Used Toner Area)
MODEL
CATEGORY
Other countermeasures
--
CONTENT
There is a possibility that abnormal noise will arise from the toner transport auger.
When abnormal noise occurs, be sure to carry out the following instructions.
[Countermeasure Method]
* Apply an amount of white grease (Molycoat) the equivalent of three grains to the stud in the figure.
* Refer to the Service Manual 13-14[M] for the removal of the used toner transfer auger unit.
DP5570, DP6570
FIELD APPLICATION
To be applied when necessary
FACTORY APPLICATION
Date
UNIT
Developer
99/06/25
-
Application of Molycoat
Loading...