BSI(Service Note) TOSHIBA
TOSHIBA TEC CORPORATION
2-4-1, Shibakoen, Minato-ku, TOKYO, 105-8524 JAPAN
BSI No
F99F655
SUBJECT
Change of MAIN ROM and LCD ROM
MODEL
CATEGORY
Other countermeasures
From Apr. 1999
CONTENT
The following items have been changed.
1. Addition of setting code (08-146,147) to enable/disable user adjustment at Auto power
5560, 6560, 7560, 7660
FIELD APPLICATION
To be applied when necessary
FACTORY APPLICATION
saving and the Auto shut-off times
Date
UNIT
Software
99/06/09
DTM-F9402
To create a situation in which user setting can be made impossible for Auto power saving and the
Auto shut-off times on the touch panel, setting codes (146,147) to enable or disable this have
been now added to the setting mode (08).
Setting at the time of shipment continues to be made to permit operation of user adjustment.
Newly added setting mode (08)
Code
No.
146 Switching of user adjustment
or not for Auto power saving
time setting
147 Switching of user adjusting or
not for Auto shut-off time
setting
Name Allowable
Input Value
0 ~ 1 0 0: possible
0 ~ 1 0 0: possible
Initial
Value
Content
1: impossible
1: impossible
2. Correction of automatic duplexing mode error
In the case of the following operations, the automatic duplex mode did not function. This error
has been corrected.
1) The 08 mode code 5 (automatic duplex mode) is set "1" (single-sided original -> duplexed
copies). --- (setting at the factory at the shipment)
2) The original is set in the ADF. ---"Single-sides original -> duplexed copies" according the
above setting is automatically selected.
3) The [All clear] key is pressed once in this condition.
4) After this, the original is removed from the ADF.
5) The original is set in the ADF again.
6) The "Single-sided original -> duplexed copies" is not automatically selected.
BSI No. F99F655 Page 2
[Combinations of ROM Versions]
The MAIN, LCD and PNL should never be operated except in the following combinations.
As only the following combinations can have their operation checked, errors could well occur
with other combinations.
5560 6560 7660,7560
MAIN 14 29 13
LCD 090 240 080
PNL 050 200 040
[MAIN ROM Change Part No.]
MODELP-I Before Change After Change Language Machine
Region
5560 64-22 4402876420
PRA-155M-13
6560 64-30 4402328170
PRA-154M-28
7560
7660
64-22 4402891510
PRA-156M-12
4402876450
PRA-155M-14
4402328200
PRA-154M-29
4402891540
PRA-156M-13
Common Common C B D Y
Common Common C B D Y
Common Common C B D Y
P I R FAA
[LCD ROM Change Part No.]
MODELP-I Before Change After Change Languages Machine
Region
5560 64-29A,
B,H,I,J,
K
64-29C
,F,G
64-29D 4402875880
64-29E 4402875890
64-29L 4402875920
64-29M 4402875930
64-29N 4402875940
64-29O 4402875950
64-29P 4402875960
64-29Q 4402875970
64-29R 4402875980
64-29S 4402875990
6560 64-29A,
B,H,I,J,
K
64-29C
,F,G
64-29D 4402327630
64-29E 4402327640
4402875860
PRA-T155LUC-080
4402875870
PRA-T155LGB-080
PRA-T155LD-080
PRA-T155LF-080
PRA-T155LI-080
PRA-T155LE-080
PRA-T155LSF-080
PRA-T155LS-080
PRA-T155LN-080
PRA-T155LDK-080
PRA-T155LNL-080
PRA-T155LP-080
4402327610
PRA-T154LUC-230
4402327620
PRA-T154LGB-230
PRA-T154LD-230
PRA-T154LF-230
4402876470
PRA-T155LUC-090
4402876480
PRA-T155LGB-090
4402876490
PRA-T155LD-090
4402876500
PRA-T155LF-090
4402876530
PRA-T155LI-090
4402876540
PRA-T155LE-090
4402876550
PRA-T155LSF-090
4402876560
PRA-T155LS-090
4402876570
PRA-T155LN-090
4402876580
PRA-T155LDK-090
4402876590
PRA-T155LNL-090
4402876600
PRA-T155LP-090
4402328220
PRA-T154LUC-240
4402328230
PRA-T154LGB-240
4402328240
PRA-T154LD-240
4402328250
PRA-T154LF-240
American
English
English EUD,SED,
German GSD C B D Y
French FRD C B D Y
Italian Service
Spanish Service
Finnish Service
Swedish Service
Norwegian Service
Danish Service
Dutch Service
Portuguese Service
American
English
English EUD,SED,
German GSD C B D Y
French FRD C B D Y
TAD,CSD,
AUD,
TWD,SAD,
ASD
UKD
part
part
part
part
part
part
part
part
TAD,CSD,
AUD,
TWD,SAD,
ASD
UKD
P I R FAA
C B D Y
C B D Y
C B D Y
C B D Y
C B D Y
C B D Y
C B D Y
C B D Y
C B D Y
C B D Y
C B D Y
C B D Y
BSI No. F99F655 Page 3
64-29L 4402327670
PRA-T154LI-230
64-29M 4402327680
PRA-T154LE-230
64-29N 4402327690
PRA-T154LSF-230
64-29O 4402327700
PRA-T154LS-230
64-29P 4402327710
PRA-T154LN-230
64-29Q 4402327720
PRA-T154LDK-230
64-29R 4402327730
PRA-T154LNL-230
64-29S 4402327740
PRA-T154LP-230
7560
7660
P-I: Page-Item P: Contents of Change I: Interchangeability R: Reasons for Change
64-29A,
B,H,I,J,
K
64-29C
,F,G
64-29D 4402890970
64-29E 4402890980
64-29L 4402891010
64-29M 4402891020
64-29N 4402891030
64-29O 4402891040
64-29P 4402891050
64-29Q 4402891060
64-29R 4402891070
64-29S 4402891080
4402890950
PRA-T156LUC-070
4402890960
PRA-T156LGB-070
PRA-T156LD-070
PRA-T156LF-070
PRA-T156LI-070
PRA-T156LE-070
PRA-T156LSF-070
PRA-T156LS-070
PRA-T156LN-070
PRA-T156LDK-070
PRA-T156LNL-070
PRA-T156LP-070
4402328280
PRA-T154LI-240
4402328290
PRA-T154LE-240
4402328300
PRA-T154LSF-240
4402328310
PRA-T154LS-240
4402328320
PRA-T154LN-240
4402328330
PRA-T154LDK-240
4402328340
PRA-T154LNL-240
4402328350
PRA-T154LP-240
4402891560
PRA-T156LUC-080
4402891570
PRA-T156LGB-080
4402891580
PRA-T156LD-080
4402891590
PRA-T156LF-080
4402891620
PRA-T156LI-080
4402891630
PRA-T156LE-080
4402891640
PRA-T156LSF-080
4402891650
PRA-T156LS-080
4402891660
PRA-T156LN-080
4402891670
PRA-T156LDK-080
4402891680
PRA-T156LNL-080
4402891690
PRA-T156LP-080
Italian Service
Spanish Service
Finnish Service
Swedish Service
Norwegian Service
Danish Service
Dutch Service
Portuguese Service
American
English
English EUD,SED,
German GSD C B D Y
French FRD C B D Y
Italian Service
Spanish Service
Finnish Service
Swedish Service
Norwegian Service
Danish Service
Dutch Service
Portuguese Service
part
part
part
part
part
part
part
part
TAD,CSD,
AUD,
TWD,SAD,
ASD
UKD
part
part
part
part
part
part
part
part
C B D Y
C B D Y
C B D Y
C B D Y
C B D Y
C B D Y
C B D Y
C B D Y
C B D Y
C B D Y
C B D Y
C B D Y
C B D Y
C B D Y
C B D Y
C B D Y
C B D Y
C B D Y
5560 Change History of ROM Version
BSI No. F99F655 Page 4
No. MAIN LCD PNL
Application
1st Lot --- 05 050 050 ALL ALL F97F938 * Change of icon design
1997/6 --- 06 -- -- --- Change in Japanese only
1997/8 DH711273
---
1997/12 DL713426
1998/1 DA813693
1998/3 DC814950
1998/4 DD815523
1998/5 DE816083
1998/9 DI817718
1999/4 DD9
07 070
07 070
08 080
080 050 ALL ALL F98A136 Improvement of aging mode
09
080 050 ALL ALL F98C224 Improvement of AC Key
10
080 050 ALL ALL F98E287 * Addition of MAIN SW
11
080 050 ALL ALL F98E302 Complying with the MMF
12
080 050 ALL ALL F98I363 * Improvement of access
13
14 090
050 ALL -- F97I020 * Setting method of edge
050 -- ALL F97L104 * Expansion of adjustment
050 ALL ALL F97L107 * Change of quantity of
050 ALL ALL F99F655 * Addition of switching code
For LanguagesFactory
Model Each
Language
BSI No Contents
* Change of time display
* Change in specifying
method of page number in
sheet insertion mode
* Correction of error during 2
in 1 copying.
erase and margin width.
* Correction of error for
access code input at
standby
code setting value as a
countermeasure to
insufficient transfer
copies able to be stacked
and stapled in the
cover/sheet insertion mode
* Correction of jamming in
the sheet insertion mode
* Correction of poor image
visibility caused by the
automatic sort setting
value.
release method
response for access code
standby.
electromagnetic reset
function driving control
(ENERGY STAR Tier 2)
code response
* Correction of error display
(add paper)
for user adjustment
* Correction of automatic
duplex mode error
BSI No. F99F655 Page 5
6560 Change History of ROM Version
No. MAIN LCD PNL
Application
1st Lot --- 18 180 180 ALL ALL --- --1997/3 MC711058
1997/4 MD711585 19
1997/5 ME711921
1997/6 --- 21 -- -- --- Change in Japanese only
1997/8 MH712884
---
1997/12 ML714202
19 190
19 190 190
191 191
20 200 200
22 220
22 220
23 230
180 UC, GB -- F97E906 * Adjustment by user
200 ALL -- F97I021 * Setting method of edge
200 -- ALL F97L105 * Expansion of adjustment
200 ALL ALL F97L108 * Change of quantity of copies
For languagesFactory
Model Each
language
D, F I, E * Switch of Logo display
F -- F97E907 Corrected errors in French
ALL ALL F97F937 * Change of icon design
BSI No. Contents
Automatic Energy
Saving/OFF Time
* Improving operability of
weekly timer setting
* Addition of add paper
display for Cover/Sheet
Insertion cassette
* Changeover of MG-2011
toward shift feeding of paper
* Countermeasure to
insufficient transfer during
showing of the specified
paper type
* LCD backlights go off during
timer off
* Errors corrected in German
and French display
* Change of time display
* Change in specifying
method of page number in
sheet insertion mode
* Correction of error during 2
in 1 copying
* Change in leading edge
adjustment setting value
* Adapted to the energy star
Tier 2.
* Adapted to the MG-2014
erase and margin width.
* Correction of error for
access code input at
standby
code setting value as a
countermeasure to
insufficient transfer
able to be stacked and
stapled in the cover/sheet
insertion mode
* Correction of jamming in the
sheet insertion mode
* Correction of poor image
visibility caused by the
automatic sort setting value.
1998/1 MA814532
1998/3 MC815003
230 200 ALL ALL F98A137 * Improvement of aging mode
24
release method
230 200 ALL ALL F98C225 * Improvement of AC Key
25
response for access code
standby.
BSI No. F99F655 Page 6
1998/4 MD815184
1998/5 ME815484
1998/9 MI816301
1999/4 MD9
230 200 ALL ALL F98E287 * Addition of MAIN SW
26
electromagnetic reset function
driving control
(ENERGY STAR Tier 2)
230 200 ALL ALL F98E303 Complying with the MMF
27
230 200 ALL ALL F98I362 * Improvement of access
28
code response
* Correction of error display
(add paper)
29 240
200 ALL ALL F99F655 * Addition of switching code
for user adjustment
* Correction of automatic
duplex mode error
BSI No. F99F655 Page 7
7560, 7660 Change History of ROM Version
No. MAIN LCD PNL
Application
1st Lot --- 04 040 040 ALL ALL F97F939 * Change of icon design
1997/6 --- 05 -- -- --- Change in Japanese only
1997/8 UH710507
---
1997/12 UL711031
06 060
06 060
07 070
040 ALL -- F97I022 * Setting method of edge
040 -- ALL F97L106 * Expansion of adjustment
040 ALL ALL F97L109 * Change of quantity of copies
For languagesFactory
Model Each
language
BSI No Contents
* Change of time display
* Change in specifying
method of page number in
sheet insertion mode
* Correction of error during 2
in 1 copying.
erase and margin width.
* Correction of error for
access code input at
standby
code setting value as a
countermeasure to
insufficient transfer
able to be stacked and
stapled in the cover/sheet
insertion mode
* Correction of jamming in the
sheet insertion mode
* Correction of poor image
visibility caused by the
automatic sort setting value.
1998/1 UA811216
1998/3 UC811354
1998/4 UD811405
1998/5 UE811515
1998/9 UI812215
1999/4 UD9
* Correction of edit position
adjustment setting value
070 040 ALL ALL F98A138 * Improvement of aging mode
08
release method
070 040 ALL ALL F98C226 * Improvement of AC Key
09
response for access code
standby.
070 040 ALL ALL F98E287 * Addition of MAIN SW
10
electromagnetic reset function
driving control
(ENERGY STAR Tier 2)
070 040 ALL ALL F98E304 Complying with the MMF
11
070 040 ALL ALL F98I364 * Improvement of access
12
code response
* Correction of error display
(add paper)
13 080
040 ALL ALL F99F655 * Addition of switching code
for user adjustment
* Correction of automatic
duplex mode error
Loading...