Toshiba f99e641 Service Note

BSI(Service Note) TOSHIBA

TOSHIBA TEC CORPORATION

2-4-1, Shibakoen, Minato-ku, TOKYO, 105-8524 JAPAN

BSI No

F99E641

SUBJECT

Change of PROM

MODEL

CATEGORY

To improve the reliability

From Jun. 1999 at the factory

CONTENT

The part change has been made for the following reasons.

[Changed/Added part No.]

P-I
5-83 4402352200

P-I: Page-Item P: Content of Change I: Interchangeability R: Reason for Change

MJ1003

FACTORY APPLICATION

Before Change After Change Note P I R FAA

PRA-780FIN-16

FIELD APPLICATION

Others

4402352210
PRA-780FIN-17

---- C B D Y

Date

UNIT

Finisher

99/06/04

DTM-F9503

[Label]

4F1-0560

1.2.3.4.5.6.

7.8.9.10.20.

4F1-0560

1.2.3.4.5.6.

7.8.9.10.20.

[Contents of Change]

Though the tray movement time has been set based on the values observed in the finisher, it may be
over this if unevenness of the motor is to be considered. So, the based on the lower limit value of the
motor specification, the calculation has been changed as follows.

Tray movement Current tray movement

time

1 bin -> 2 bin 8350 ms 10590 ms
1 bin -> 3 bin 10800 ms 14910 ms
2 bin -> 1 bin 8750 ms 10590 ms
2 bin -> 3 bin 8050 ms 10200 ms
3 bin -> 1 bin 12400 ms 14910 ms
3 bin -> 2 bin 8400 ms 10200 ms

New tray movement time