BSI(Service Note) TOSHIBA
TOSHIBA TEC CORPORATION
2-4-1, Shibakoen, Minato-ku, TOKYO, 105-8524 JAPAN
BSI No
F99C545
SUBJECT
Change of Air Filter (Scanner Area in Front Side)
MODEL
CATEGORY
To improve the productivity
From Mar. at the factory
CONTENT
To improve the productivity, the following parts have been changed.
[Changed/Added Part No.]
MODEL P-I Before Change After Change Note P I R FAA
P-I: Page-Item P: Contents of Change I: Interchangeability R: Reasons for Change
DP3580
FACTORY APPLICATION
8-31 4401962850
COV-FILTER-FAN
8-32 4408676990
FILTER-SCAN-F
FIELD APPLICATION
To be applied when necessary
4402946040
K-COV-FILTER
4402946030
FILTER-SCAN-F
Date
UNIT
Optical
1/KP -> N/A
99/03/24
DTM-F9201
C I G -DP3580
C - G -
Note
1. COV-FILTER (P.8-#.31) has been changed so that its composition includes the FILTER (
P.8-#.32), and the FILTER (P.8-#.32) is supplied individually and is not a service part.
2. When the current part "FLTER(P.8-#.32)" is
installed, be careful that the FILTER(P.8-#.32)
does not come from the window of the
COV-FILTER (P.8-#.31). (Refer to the figure on
the right)
* If FILTER(P.8-#.32) (especially the attachment
point of the double-sided tape: arrow A in the
figure on right) protrudes from the window of the
COV-FILTER (P.8-#.31), where it contacts the
fan of the FAN-DC-210N (P.8-#.29) and causes
the generation of noise.
BSI No. F99C545 Page 2
COV-FILTER
FILTER
A