Toshiba f99a500 Service Note

BSI(Service Note) TOSHIBA

TOSHIBA TEC CORPORATION

2-4-1, Shibakoen, Minato-ku, TOKYO, 105-8524 JAPAN

BSI No

F99A500

SUBJECT

Change of Senior Main CPU ROM

MODEL

CATEGORY

Treatment in the field, Addition
of the Function

From Jan. 1999 at the factory

CONTENT

The senior MAIN CPU has been changed due to the following alterations.

1. The following function can be used.

DP3580

FIELD APPLICATION

Others

FACTORY APPLICATION

Setting Mode "08"

Code Name

602 Energy saving and automatic power

supply off display OFF setting function

Date

UNIT

Software

99/03/03

DTM-F9102

2. The following function can be also used for FSMS.
(1) Current transport duration counter
(2) Error history
(3) Total counter
(4) FAX scanning reproduction ratio fine adjustment
(5) FAX main motor fine adjustment

3. The following default value has been changed.

FAX Setting Mode "13"

Default value

Code Name Before Change After

Change

930 FAX sheet exit bin

specified

4. The control specifications have been changed based on field requests.

Before Change After Change

When the sort (or staple-sort) and duplex copying (single->duplex, duplex->duplex) are

Content

Control
specificatio
n

selected, the paper jammed in the ADU stack may be normally stacked into the ADU.
When this occurs, the control method after the jam release has been changed.
JAM removal -> restart -> selection of
modes are all finished

If the paper stays inside the ADU at this
time, "After removing the paper

from inside the ADU, start copying
again" is displayed.

0 1 Field request

JAM removal -> restart -> Exit control inside
the ADU is finished.

<-

If the paper stays inside the ADU at this time,
"After removing the paper from inside the
ADU, start copying again" is displayed.

Note

<-

BSI No. F99A500 Page 2

Comment

When all the modes have been
selected, the display causes unwanted
copies to be made in a mixed up page
order.

To prevent the following errors, when all the
ADU stack paper (except jammed paper) has
exited, the display is changed for control with
quicker timing.
* Wrong order copies
* The paper in the ADU should be removed.

5. The following functions have been added so that super G3 FAX can be performed.

* Though items 1~4 are applied to all regions, this is only for "Singapore".

(1) Control of super G3 FAX board
(2) Control of JBIG symbol
(3) Control for cassette specified for recording paper
(4) Control of result list with reduction image
(5) Control for self-diagnosis telephone memory list
(6) Control of high definition mode (8 x 15.4)
(8) Application of display etc. for Asia regions (display etc.)
(9) Self-diagnosis 1+ 3/0 + 8 setting items

[Changed/Added Part No.]

MODEL P-I Before Change After Change Note P I R FAA

4402955740
PMA-T230S1-UC05
4402955750
PMA-T230S1-EU05
4402955760

DP3580

P-I: Page-Item P: Contents of Change I: Interchangeability R: Reasons for Change

7-33

7-34 4402955810

PMA-T230S1-AD05
4402955790
PMA-T230S1-F05
4402955800
PMA-T230S1-D05
4402955770
PMA-T230S1-S05
4402955780
PMA-T230S1-NL05

PMA-T230S205

4402955910
PMA-T230S1-UC06
4402955920
PMA-T230S1-EU06
4402955930
PMA-T230S1-AD06
4402955940
PMA-T230S1-F06
4402955950
PMA-T230S1-D06
4402956080
PMA-T230S1-S06
4402956090
PMA-T230S1-NL06
4402955970
PMA-T230S2-UE06

NAD C D J Y
UKD,SED C D J Y
TWD,SAD,ASD C D J Y
FRD C D J Y
GSD C D J Y
SWEDISH C D J Y
DUTCH C D J Y

C D J Y

[ Combinations of ROM Versions ]

They should never be operated except in the following combinations. As only the following
combinations can have their operation checked, errors could well occur with other
combinations.

MAIN PRA-T230M-zzz 040
STM1 PMA-T230S1-XXzz 06
STM2 PMA-T230S2-Xzz 06

PFC IC-230PFC-zz 01

SRAM K-SRAM-T230Xzz 05

SG3FAX PRA-F500-Azz 14

Combination History of ROM Version

Factory Application

STM1 STM2 MAIN SRAMPFC SG3

FAX

First lot production 05 05 030 04 00 - F98K442
1998/12 05 05 030 04 01 - F98L462

BSI No