Page 1
BSI(Service Note) TOSHIBA
TOSHIBA TEC CORPORATION
2-4-1, Shibakoen, Minato-ku, TOKYO, 105-8524 JAPAN
BSI No
F98L476
SUBJECT
Addition of Error Code (CB8) (Addition due to Omission in the Service
Handbook)
MODEL
CATEGORY
Treatment in the field,
Correction of Service Manual
----------
CONTENT
The following error code has been added to the Service Handbook.
DP2460, DP2570
FIELD APPLICATION
To be applied when necessary
FACTORY APPLICATION
Date
UNIT
Documents
98/12/25
----
Group
Finisher Service Call CB8 Backup RAM Abnormality
[Field Treatment Method]
When the above error occurs and the finisher driver PC board has to be replaced, perform this as in
"MJ-1003 Service Manual 4.III-B Electrical Adjustment".
Error Code Content
Loading...