Toshiba f98l465 Service Note
BSI(Service Note) TOSHIBA
TOSHIBA TEC CORPORATION
2-4-1, Shibakoen, Minato-ku, TOKYO, 105-8524 JAPAN
BSI No
F98L465
SUBJECT
New Model DP-2570 (Service Handbook)
MODEL
CATEGORY
New Model Description
----------
CONTENT
We are pleased to announce the availability of our newest copier, the DP-2570. The DP-2570 is very
similar to the DP-2460, except for minor changes. Therefore, a service handbook has not been
specially prepared for this machine, and this BSI in which the points differing from the DP-2460 are
shown, is to serve as a substitute.
DP2570
FIELD APPLICATION
Others
FACTORY APPLICATION
Date
UNIT
Documents
99/01/06
----
[Differing points from the DP-2460]
Red type is for the differing points when type is Change.
Type Item Code Adjustment Mode Initial
Change Adjust-me
nt mode
(05)
400 Polygonal motor
rotation, fine
adjustment,
Standard
PCC
value
128 114-142 1
600dpi
401 Polygonal motor
GDI 128 114-142
rotation, fine
adjustment,
600dpi
Note 4)"GDI/DSI For optional board" has been changed as follows.
"GDI" : for optional printer-controller board
"DSI" : for optional board
Type Item Code Adjustment Mode Initial
Addition Adjust-me
nt mode
(05)
413 Laser starting
position,
16 X 15.4
FAX 95 0-255 If the value is
value
[ASD,,AUD]
Allowance Contents
If the value is
increased by "1"
the primary
scanning
reproduction ratio
is enlarged by
approx. 0.150%.
Allowance Contents
increased by "1",
the effective image
data writing area on
the drum is shifted
by 0.00635mm to
the primary
scanning direction.
Operation
procedure
grou
p
5
Operation
procedure
grou
p
5
BSI No. F98L465 Page 2
414 Laser starting
position,
15.4 X 16
[ASD,,AUD]
FAX 96 0-255 If the value is
increased by 1", the
effective image
data writing area on
the drum is shifted
by 0.00635mm to
the primary
scanning direction.
422 Secondary
scanning
reproduction
ratio, main motor
speed, fine
adjustment
[ASD,AUD]
Type Item Code Adjustment Mode Initial value Allowance Contents
Addition Setting
mode
(08)
330 Interrupt copying
and Fax priority
memory full
491 EXIT-FAN1,2
DUCT-FAN
stopping set
FAX 169 0-255 If the value is
increased by 1", the
reproduction ratio of
the paper feeding
direction is enlarged
by approx.
0.0315%.
ALL 0 0-1 0: Interrupt copying
1: FAX memory full
ALL --- 0-1 0: No stopping
1: Stopping during Low
Power Mode
EUR -> 1
UC, Other -> 0
Change Setting
mode
(08)
205 Automatic power
save
ALL 11 0-15 0 = Not functional, 1-5 =
Setting value x 30 sec.6 =
3 min. 7 = 4 min. 8 = 5
min. 9 = 7 min., 10 = 10
min. 11 = 15 min. 12 = 20
min.
13 = 30 min. 14 = 45 min.
15 = 60 min.
206 Automatic power
off
ALL 7 0-20 0 = 3 min., 1 = 5 min., 2 =
10 min., 3 = 15 min., 4 =
20 min., 5 = 25 min., 6 =
30 min., 7 = 40 min., 8 =
50 min., 9 = 60 min. 10 =
70 min., 11 = 80 min.,12
= 90 min., 13 = 100 min.,
14 = 110 min., 15 = 120
min. 16 = 150 min. 17 =
180 min., 18 = 210 min.,
19 = 240 min., 20 = Not
functional
412 Fuser
temperature in
the energy saver
ALL UC=2
EU=1
Other=1
0-5 0: OFF, 1: 120°C, 2:
130°C, 3: 140°C, 4:
150°C, 5: 160°C
mode
900 ROM Version
indication
(Standard ROM)
ALL --- --- UC : T222S1UCxx
SED : T222S1EUxx
FRD : T222S1Fxx
GSD : T222S1Dxx
AUD,SAD,ASD :
T222S1ADxx
901 ROM Version
ALL --- --- T222S2UExx
indication
(Extended ROM)
5
5
Loading...