Toshiba f98k449 Service Note

BSI(Service Note) TOSHIBA

TOSHIBA TEC CORPORATION

2-4-1, Shibakoen, Minato-ku, TOKYO, 105-8524 JAPAN

BSI No

F98K449

SUBJECT

Countermeasure to Irregular Exiting of Thick Originals from the ADF

MODEL

CATEGORY

Request from the field

---------

CONTENT

When the thick paper originals (especially, a large amount) are set on the ADF, they often exit
irregularly. So a weight (spring) as a countermeasure to this problem has been added as a service
part.

[Changed/Added Part No.]

MODEL P-I Before Change After Change Remarks P I R
MR~
4560/70

P-I: Page-Item P: Content of Change I: Interchangeability R: Reason for Change

4560, 4570, MR2008, MR3006, MR3006A

FIELD APPLICATION

To be applied when necessary

FACTORY APPLICATION

8-20
47-20

---------- 4408694680
WEIGT-SPC-099

---- A - J Y

UNIT

ADF

Date

98/12/11

DTM-F8X14

FAA

[Installation Method]

The paper-exit staple guide bar for the paper-exit under the original tray is removed. Then the current
weight spring is removed once. The current and new weight springs are then installed to the
paper-exit staple guide bar which is reinstalled as previously.

Current: weight (spring)

BSI No. F98K449 Page 2

Added weight (spring)

Paper-exit staple guide bar

[Notes]

With "4408694680" is installed, paper-exit misfeeding may be caused when using thin paper originals
(a small amount or weak paper).
* After confirming the situation of the user, the application of this BSI should be reviewed concerning
what measures to take.