Toshiba f98k426 Service Note

BSI(Service Note) TOSHIBA

TOSHIBA TEC CORPORATION

2-4-1, Shibakoen, Minato-ku, TOKYO, 105-8524 JAPAN

BSI No

F98K426

SUBJECT

Change of PROM for Control Panel (Ver 009 -> 010)

MODEL

CATEGORY

Other countermeasures

From Nov. 1998

CONTENT

To correct an operation error in the COVER SHEET and SHEET INSERTION modes, the ROM has
been altered.

Detailed Explanation

In the operation method (refer to the related pages in
the Operator's Manual) for COVER SHEET copying.

3560, 3570, 4560, 4570

FIELD APPLICATION

Others

FACTORY APPLICATION

Date

UNIT

Software

98/11/20

DTM-F8912

* Select the COVER SHEET cassette as shown in
the display in Figure 1 display.

* Then, push the SET key and the display shown in
Figure 2 will be displayed.

When the desired COVER mode is pushed in the
displayed in Figure 2,

is shown and copying cannot be performed.

The above error has been corrected so that copying
can be performed.

* This error occurred in the SHEET INSERTION
mode too and the same correction has been
made.

CANNOT USE THIS CASSETTE

Fig. 1

Fig. 2

[ Combinations of ROM Versions ]

The MAIN, LCD and PNL should never be operated except in the following combinations. As
only the following combinations can have their operation checked, errors could well occur
with other combinations.

BSI No. F98K426 Page 2

3560 4560

PNL

PRA-213P- xxx

MAIN

PRA-213M- xxx

LCD PRA-12D xx-xxx 006 006

010 010
015 014

[Changed/Added Part No.]

MODEL P-I Before Change After Change Remarks P I R
3560
3570
4560
4570

P-I: Page-Item P: Contents of Change I: Interchangeability R: Reasons for Change

3-41

4402447690
PRA-213P-009

4402448630
PRA-213P-010

C E J Y

History of Change of ROM Version for the 3560/3570

FAA

Factory
Application

Serial
Number

MAIN LCD PNL BSI No Contents

1st Lot --- 010 007 Correction of errors from

the first lot production till
first starting up

--- --- 012 006
(000)

008 F98D275 Service calls related to

the paper feeding system

1998/3 --- 013 009 * Improvement of access

codes' response
* Alignment shifting in
dual-page copying

1998/7 --- 014 F98F328 Field Service

Management System
(FSMS)

History of Change of ROM Version for the 4560/4570

Factory

Application

--- --- 011

1998/3 --- 013 009 * Addition of forward

1998/7 --- 013 F98F328 Field Service

Serial

Number

MAIN LCD PNL BSI No Contents

006

(000)

008

F98D276

* Correction of E88 jam

error

* Service calls related to

the paper feeding
system

accelerating data
exchange drive
* Improvement of access
code response
* Alignment shifting in
dual-page copying

Management System
(FSMS)