Page 1
BSI(Service Note) TOSHIBA
TOSHIBA TEC CORPORATION
2-4-1, Shibakoen, Minato-ku, TOKYO, 105-8524 JAPAN
BSI No
F98H353
SUBJECT
Change of ROM
MODEL
CATEGORY
Treatment in the field
Refer to text
CONTENT
The ROM version improvement list is shown below.
Change of Parts
DP2460
FIELD APPLICATION
Others
FACTORY APPLICATION
Date
98/09/04
DTM-F8313,-F8615,-F8704,-F8707
UNIT
Other
[ Changed/Added Part No. ]
MODEL P-I Before Change After Change Notes P I R FAA
4402365550
PMA-T220S1UC38
DP2460 4402365560
PMA-T220S1EC38
7-21
(SYS1)
7-21
(SYS1)
7-22
(SYS2)
7-38
(MAIN)
4402365590
PMA-T220S1F39
4402365600
PMA-T220S1D39
4402365570
PMA-T220S1AD38
----- 4402366050
4402365580
PMA-T220S238
4402367130
PRA-T220M-140
4402365460
K-SRAM-T220U08
4402365930
PMA-T220S1UC60
4402365940
PMA-T220S1EU60
4402365960
PMA-T220S1F60
4402365970
PMA-T220S1D60
4402365950
PMA-T220S1AD60
4402365980
PMA-T220S1E60
4402366030
PMA-T220S1I60
4402366040
PMA-T220S1NL60
PMA-T220S1S60
4402366070
PMA-T220S1N60
4402366080
PMA-T220S1DK60
4402366090
PMA-T220S1SF60
4402365780
PMA-T220S258
4402367170
PRA-T220M-190
4402365750
K-SRAM-T220U09
NAD C B J Y
OTHERS C B J Y
FRD C B J Y
GSD C B J Y
AUD,SAD,ASD C B J Y
SPANISH A - J Y
ITALIAN A - J Y
DUTCH A - J Y
SWEDISH A - J Y
NORWEGIAN A - J Y
DANISH A - J Y
FINNISH A - J Y
C B J Y
C B J Y
NAD C B J Y
Page 2
BSI No. F98H353 Page 2
7-47
(SRAM
)
KR7006 103-14
(GDI)
103-13 4402368040
P-I: Page-Item P: Contents of Change I: Interchangeability R: Reasons for Change
* In the "7-21", seven ROMs is added for Europe (each languages).
* In the "103-13", PC board has been also changed as shown above.
Version Improvement Explanation
1)PMA-T220S1XXZZ (P.7-I.21)
ZZ: Version
Version Contents of Change
4402365430
K-SRAM-T220E08
4402365440
K-SRAM-T220A08
4402368240
PRA-T220GDI-00
PWA-F-GDI-778
4402365760
K-SRAM-T220E09
4402365770
K-SRAM-T220A09
4402368390
PRA-T220GDI-164
4402368400
PWA-F-GDI-778
OTHERS C B J Y
AUD C B J Y
C B J Y
The circle has
been changed.
C B J Y
Application at the
Factory
58 Addition of the following setting function (Refer to BSI #.F98D272)
* ADF detection original size
* Automatic energy saving and Automatic power supply off display OFF
setting function
* Cascade operation setting
60 * Change of Polygonal motor pre-running (08-483) From July at the
Changed Contents of "08"-"483"
Code Name Default
Value
483 Polygonal
motor
pre-runnig
0 Current 0~1 0: Pre-running
New 0~2 0: Setting is effective only the following conditions:
Allowable
Input value
Contents
1: Deactivate
* When the original is set to the DF
* When the DF or the platen are opened and closed.
1: Deactivate
2: Setting is effective only the following conditions:
* When the original is set to the DF
From March at the
factory
factory
2) PMA-T220S2ZZ (P.7-I.22)
ZZ= Version
Version Content of Change
Application at the
Factory
58 Change with PMA-T220S1XX58 From March at the
factory
3) PMA-T220M-ZZZ (P.7-I.38)
ZZZ= Version
Version Contents of Change
Application at the
Factory
Page 3
BSI No. F98H353 Page 3
190 * Correction has to be made if the exposure lamp for the first
page is ON too long.
When an ADF original is copied without selecting APS.
* An E 43 jam occurs. This has been corrected.
If the ADU is pulled out during feeding from the duplexer, even
if the paper is not at the alignment position, a jam is displayed
on the control panel at the alignment position.
* Change of ROM version display ("08-902")
-> PMA-T220M-ZZZ:"ZZZ" has been displayed.
* When [Dual Page + Book Copy] are selected in PFC feeding,
the margin position is applied in the reverse position. This error
has been corrected.
* If jammed paper between the drum and the fuser unit is not
removed and copying restarted, an abnormal transport motor
condition (CB1) will occur. A Countermeasure to this error has
been developed.
* Countermeasure to abnormal signal (C58)
An abnormal signal occurs between the IPC and the finisher
when the front cover is opened and closed.
* Countermeasure to control panel locking
During basic copying, the control panel becomes locked without
any ADF operation sending any signal.
* Countermeasure to EA2 jam error
As paper exits during the operation of the bins in the Magazine
sort mode, an EA2 jam has occurred. Apply at the same time
as the finisher ROM version 13.01 and after.
* The jam, jam position and error code are not displayed at the
same time. This error has been corrected.
From March at the
factory
4) K-SRAM-T220XZZ (P.7-I.47)
ZZ= Version
X:A=AUD
U=NAD
E=EXCEPT NAD & AUD
Version Contents
09 Newly added of the initial value setting (08 mode)
(Refer to BSI #.F98D272 & #.F98D273.)
Code Initial Value Setting
390 ~ 393 0
461 0
485 0
486 0 * Code 484 can be used only when 0.
602 0 (North America)
1 (Europe/Australia)
652 2
Setting Change (Mode Memory)
Memory 1 Change of setting value of
X1=102,X2=197 -> X1=10,X2=65
Y1=10, Y2=65 -> Y1=102,Y2=197
Memory 3 "Sort" operation is added.
Application at the
Factory
From March at the
factory
5) PRA-T220GDI-ZZZ (P.103-I.14)
ZZZ= Version
Version Content of Change
Application at the
Factory
Page 4
BSI No. F98H353 Page 4
164 Printing cannot be reactivated in continuous printing when there
is a signal error with the client PC. This has been corrected.
[ Combinations of ROM Versions ]
The following ROMs should never be operated except in the following combinations. As
only the following combinations can have their operation checked, errors could well occur
with other combinations.
PMA-T2
20S1XX
ZZ
SYS1 SYS2 MAIN SRAM PFC GDI
58 58 190 09 06
60 From July at the factory
Combination History of ROM Version
The ROM version combination list for factory application is as shown.
This list is shown in BSI #.98C247.
Note) *1--*5 are shown ZZ (version) for XX (region) in PMA-T220S1XXZZ.
JP=JPN UC=NAD
AD=AUD,SAD,ASD D =GSD F =FRD
EU=EUROPE EXCEPT GSD & FRD
PMA-T2
20S1XX
ZZ
SYS1 SYS2 MAIN SRAM PFC
19 O O 19 110 06 04 As an overseas
24 O 24 130 07 05 From Nov. at the
27 O 27 From Nov. at the
28 O Mid-Nov. at the
32 O O 28 Mid-Nov. at the
34 O O 140 08 06 Late in Nov. at the
38 O O O 38 From Dec. at the
38 O O From Dec. at the
PMA-T2
20S1XX
ZZ
SYS1 SYS2 MAIN SRAM PFC GDI
58 58 190 09 06
60 From July at the factory
PMAT220S2
ZZ
*1
*2
J
U
P
C
PMAT220S2
ZZ
PMAT220M-
ZZZ
*3
*4D*5F*6
E
U
PMA-
T220M-
ZZZ
K-SRAM
T220X
ZZ
PMAT220S2
A
ZZ
D
K-SRAM
T220X
ZZ
IC-220
PFC-
ZZ
PMAT220M-
ZZZ
IC-220
PFC-
ZZ
PRA-T2
20GDI-
ZZZ
164
K-SRAM
T220X
ZZ
PRA-T2
20GDI-
ZZZ
164
Application at the
Factory
From March at the factory
IC-220
PFC-
ZZ
Application at the
Factory
From March at the factory
From March at the
factory
Application at the
Factory
sample
factory, Japan only
factory
factory. For UC
factory. For AD added
factory
BSI.#.F98A148
factory
factory
BSI
#.98H353
BSI
#.98C247
Page 5
BSI No. F98H353 Page 5
Loading...