Toshiba f98f320 Service Note

BSI(Service Note) TOSHIBA

TOSHIBA TEC CORPORATION

2-4-1, Shibakoen, Minato-ku, TOKYO, 105-8524 JAPAN

BSI No

F98F320

SUBJECT

Installation Method of Cassette Size Switch

MODEL

2060, 2860, 2870, 3560, 3570, 4560, 4570, DP2460, KD1003, KD1003A,

KD2009, KD2009A, MY1006

CATEGORY

Treatment in the field

FACTORY APPLICATION

---

CONTENT

According to the installation conditions of the size switch of the paper cassette, the screw head on the
rear side of the paper cassette cover (figure 1) may make contact with the corner of the size switch
(figure 2).

The installation of the size switch packed with the cassette module (MY1006) and the replacement
should be performed as follows.

FIELD APPLICATION

To be applied when necessary

Date

98/06/19

UNIT

Paper Feed unit

DTM-F8407

1.Temporarily fix the size switch with two screws (upper & lower).

2.While pressing the size switch in direction "A" (figure 2), tighten the two screws completely.

Cassette cover

Screw head

Size switch

Corner

A

Fig. 1

Fig. 2