Toshiba f98e304 Service Note

BSI(Service Note) TOSHIBA

TOSHIBA TEC CORPORATION

2-4-1, Shibakoen, Minato-ku, TOKYO, 105-8524 JAPAN

BSI No

F98E304

SUBJECT

Change of ROM / MAIN ROM Ver. 10 -> 11

MODEL

CATEGORY

Addition of the Function

From May 1998 / UE811515

CONTENT

The following items have been changed.

Item

7560, 7660

FIELD APPLICATION

Others

FACTORY APPLICATION

Content

Comply with the MMF (Memory monitor function)

Date

UNIT

Software

98/06/10

DTM-F8409

This MMF function is to enable the reading or rewriting by personal computer of RAM data inside copying machines. This is presently only available for the copying machine itself, so in order to actually employ this function, use must be made of application for personal computers and the MMF interface board kit which will only be issued later. Details of the operation method, to which you should refer, will be published in an Operator's Manual at a later date.

[ Combinations of ROM Versions ]

The MAIN, LCD and PNL should never be operated except in the following combinations. As only the following combinations can have their operation checked, errors could well occur with other combinations.

MAIN: LCD: Ver. 070 (There is no change of the LCD ROM.) PNL:

[MAIN ROM Changed Part No.] Version 10 -> 11

MODELP/I

7560 7660

P: Contents of Change I: Interchangeability R: Reasons for Change

64-22

Ver. 11

Ver. 040 (There is no change of the PNL ROM.)

Before Change After Change Languages Machine

Region 4402891390 PRA-156M-10

4402891460 PRA-156M-11

Common Common

P I R

C B B -

FAA

BSI No. F98E304 Page 2

Change History of ROM Version

Serial

Application 1st Lot --- 04 040 040 ALL ALL F97F939 * Change of icon design

1997/6 --- 05 -- -- --- Change in Japanese only 1997/8 UH710507

1997/12 UL711031

1998/1 UA811216 1998/3 UC811354

1998/4 UD811405

1998/5 UE811515

Number

---

MAIN LCD PNL

06 060

07 070

070 040 ALL ALL F98A138 * Improvement of aging

070 040 ALL ALL F98C226 * Improvement of AC Key

070 040 ALL ALL F98E287 * Addition of MAIN SW

070 040 ALL ALL F98E304 Comply with the MMF

040 ALL -- F97I022 * Setting method of edge

040 -- ALL F97L106 * Expansion of adjustment

040 ALL ALL F97L109 * Change of quantity of

For LanguagesFactory

Model Each

Language

BSI No Content

* Change of time display * Change in specifying

method of page number in sheet insertion mode

* Correction of error

during 2 in 1 copying.

erase and margin width.

* Correction of error for

access code input at standby

code setting value as a countermeasure to insufficient transfer

copies able to be stacked and stapled in the cover/sheet insertion mode

* Correction of jamming in

the sheet insertion mode

* Correction of poor

image visibility caused by the automatic sort setting value.

* Correction of edit

position adjustment setting value

mode release method response for access

code standby. electromagnetic reset

function driving control

(ENERGY STAR Tier 2)